------ LAST KMSG (/proc/last_klog) ------ platform_init_mmu_mappings: entry platform_init_mmu_mappings:57: mapping shared ram as uncached at 0x40000000 platform_init_mmu_mappings: exit platform_init_timer: entry platform_init_timer: exit platform_set_periodic_timer:39: cb 0x4010c6bd, arg 0x0, interval 10 ****************************************** * Welcome to bootie! * Version: 468 ****************************************** mmch_init: entry mmch_init: exit usbc: initialized (rc=0) target_init_buttonscan: entry target_init_board_id: emu=0, product=0x1, hwbuild=1 boardtype=topaz-Wifi-pvt Memory bank 0 -> address: 0x40200000-0x46700000 size:0x06500000 Memory bank 1 -> address: 0x48000000-0x7ff00000 size:0x37F00000 i2c_init: Register GSBI 3 as i2c bus 0 i2c_init_clock: The i2c clock rate is 19200000 i2c_init: Register GSBI 4 as i2c bus 1 i2c_init_clock: The i2c clock rate is 19200000 i2c_init: Register GSBI 9 as i2c bus 2 i2c_init_clock: The i2c clock rate is 19200000 i2c_init: Register GSBI 8 as i2c bus 3 i2c_init_clock: The i2c clock rate is 19200000 i2c_init: Register GSBI 7 as i2c bus 4 i2c_init_clock: The i2c clock rate is 19200000 a6_init_sbw_pins: TCK: 157, TDIO; 158, WKUP: 155 max8903b_gpio_init Starting battery authentication... Battery auth succeeded sys_init: entry Wall message(Boot reason) = 0x6f656d99 ("crash") sys_init: booted because 'crash' mmch_reset: entry Bus(0) Primecell ID regs: 0x80 0x11 0x4 0x0 0xd 0xf0 0x5 0xb1 sdc1_clk_set 400000 mmch_set_active:727: bus 0, active 1 sdc1_clk_set 400000 mmch_reset: exit mmch_set_active:727: bus 0, active 1 sdc1_clk_set 400000 cid: 0x2010053 0x454d3136 0x479051a6 0xf2496efc mfg id: 0x2 oem id: 0x100 name: 'SEM16G' rev: 0x90 sn: 0x51a6f249 date: 6.2011 sdc1_clk_set 50000000 token section is 4096 bytes long target_check_boot_condition: entry Wall message(Boot reason) = 0x6f656d99 ("crash") display_init: displayWidth: 1024, displayHeight: 768 Wall message(Boot reason) = 0x6f656d99 ("crash") p=69 ca=3462400 v=3835680 i=-157968 autobooting with 'fsboot' command loading file '/boot/uImage' to address 0x41000000 parse_uimage:241: uimage 0x41000000 <6>[ 0.000000] Booting Linux on physical CPU 0 <6>[ 0.000000] Initializing cgroup subsys cpu <5>[ 0.000000] Linux version 3.0.101-cyanogenmod-gee9eb08 (flintman@mx.thenoblealliance.com) (gcc version 4.7 (GCC) ) #2 SMP PREEMPT Fri Apr 25 06:21:30 EDT 2014 <4>[ 0.000000] CPU: ARMv7 Processor [510f02d2] revision 2 (ARMv7), cr=10c5387d <4>[ 0.000000] CPU: VIPT nonaliasing data cache, VIVT ASID tagged instruction cache <4>[ 0.000000] Machine: TENDERLOIN <6>[ 0.000000] memory pool 0 (start 38000000 size 600000) initialized <6>[ 0.000000] memory pool 1 (start 38600000 size 3802000) initialized <6>[ 0.000000] memory pool 3 (start 75e00000 size 9800000) initialized <4>[ 0.000000] Memory policy: ECC disabled, Data cache writealloc <3>[ 0.000000] smem_find(137, 72): wrong size 64 <6>[ 0.000000] socinfo_init: v5, id=86, ver=2.0, raw_id=1696, raw_ver=1696, hw_plat=0, hw_plat_ver=65536 <6>[ 0.000000] accessory_chip=0 <7>[ 0.000000] On node 0 totalpages: 213760 <7>[ 0.000000] free_area_init_node: node 0, pgdat 80b93be0, node_mem_map 81011000 <7>[ 0.000000] Normal zone: 2024 pages used for memmap <7>[ 0.000000] Normal zone: 0 pages reserved <7>[ 0.000000] Normal zone: 211736 pages, LIFO batch:31 <6>[ 0.000000] passing from bootie 6291456 bytes at 7f600000 physical for fb <6>[ 0.000000] PERCPU: Embedded 8 pages/cpu @81803000 s9536 r8192 d15040 u32768 <7>[ 0.000000] pcpu-alloc: s9536 r8192 d15040 u32768 alloc=8*4096 <7>[ 0.000000] pcpu-alloc: [0] 0 [0] 1 <4>[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 211736 <5>[ 0.000000] Kernel command line: root=/dev/ram0 rootwait ro fbcon=disable console=ttyS0,115200n8 androidboot.serialno=HCT4FRK810A5881F3UVRRJCOIBGT9N94 fb=0x7f600000 nduid=19572f6354108a2805873cffdb723c271ce9e622 klog=0x7ff00000 klog_len=0x100000 boardtype=topaz-Wifi-pvt lastboot=crash <4>[ 0.000000] boardtype_setup: boardtype_str = topaz-Wifi-pvt <4>[ 0.000000] boardtype_setup: boardtype = topaz_wifi <6>[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) <6>[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) <6>[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) <6>[ 0.000000] allocated 4145152 bytes of page_cgroup <6>[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups <6>[ 0.000000] Memory: 101MB 734MB = 835MB total <5>[ 0.000000] Memory: 822908k/822908k available, 187780k reserved, 0K highmem <5>[ 0.000000] Virtual kernel memory layout: <5>[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) <5>[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) <5>[ 0.000000] DMA : 0xff000000 - 0xffe00000 ( 14 MB) <5>[ 0.000000] vmalloc : 0xbf800000 - 0xfa000000 ( 936 MB) <5>[ 0.000000] lowmem : 0x80000000 - 0xbf400000 (1012 MB) <5>[ 0.000000] pkmap : 0x7fe00000 - 0x80000000 ( 2 MB) <5>[ 0.000000] modules : 0x7f000000 - 0x7fe00000 ( 14 MB) <5>[ 0.000000] .init : 0x80008000 - 0x80054000 ( 304 kB) <5>[ 0.000000] .text : 0x80100000 - 0x80a71de8 (9672 kB) <5>[ 0.000000] .data : 0x80b00000 - 0x80b96300 ( 601 kB) <5>[ 0.000000] .bss : 0x80b96324 - 0x8100ca04 (4570 kB) <6>[ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 <6>[ 0.000000] Preemptible hierarchical RCU implementation. <6>[ 0.000000] NR_IRQS:855 <6>[ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms <6>[ 0.000000] Console: colour dummy device 80x30 <6>[ 0.150177] Calibrating delay using timer specific routine.. 13.52 BogoMIPS (lpj=67646) <6>[ 0.150268] pid_max: default: 32768 minimum: 301 <6>[ 0.150756] Mount-cache hash table entries: 512 <6>[ 0.151947] Initializing cgroup subsys cpuacct <6>[ 0.152069] Initializing cgroup subsys memory <6>[ 0.152191] Initializing cgroup subsys freezer <6>[ 0.152282] CPU: Testing write buffer coherency: ok <6>[ 0.152648] hw perfevents: enabled with ARMv7 Scorpion-MP PMU driver, 5 counters available <4>[ 0.184082] CPU1: Booted secondary processor <6>[ 0.193969] Brought up 2 CPUs <6>[ 0.194000] SMP: Total of 2 processors activated (27.05 BogoMIPS). <6>[ 0.206268] print_constraints: dummy: <3>[ 0.206390] rdev_init_debugfs: Error-Bad Function Input <6>[ 0.206726] NET: Registered protocol family 16 <3>[ 0.206909] AXI: msm_bus_fabric_init_driver(): msm_bus_fabric_init_driver <6>[ 0.208496] msm_rpm_init: RPM firmware 2.0.67653 <4>[ 0.209045] tenderloin_setup_pin_table: using tenderloin_pins_wifi <6>[ 0.209442] saw_probe: id=0, name=8901_s0 <6>[ 0.209777] saw_probe: id=1, name=8901_s1 <6>[ 0.211181] rcg_clk_handoff: gsbi12_uart_clk rate=7372800 <6>[ 0.211273] rcg_clk_handoff: gsbi3_qup_clk rate=24000000 <6>[ 0.211334] rcg_clk_handoff: gsbi4_qup_clk rate=24000000 <6>[ 0.211425] rcg_clk_handoff: gsbi7_qup_clk rate=24000000 <6>[ 0.211486] rcg_clk_handoff: gsbi8_qup_clk rate=24000000 <6>[ 0.211547] rcg_clk_handoff: gsbi9_qup_clk rate=24000000 <6>[ 0.211608] rcg_clk_handoff: sdc1_clk rate=48000000 <6>[ 0.211700] rcg_clk_handoff: usb_hs1_xcvr_clk rate=60000000 <6>[ 0.211791] rcg_clk_handoff: dsi_byte_clk rate=1 <6>[ 0.211883] rcg_clk_handoff: mdp_clk rate=200000000 <6>[ 0.212036] rcg_clk_handoff: pixel_mdp_clk rate=96000000 <6>[ 0.213531] Max ACPU freq: 1782000 KHz <6>[ 0.213562] Initial ACPU freq: 1512000 KHz <6>[ 0.221038] CPU0: 28 scaling frequencies supported. <6>[ 0.221069] CPU1: 28 scaling frequencies supported. <6>[ 0.222290] pm8058_probe: PMIC revision: E3 <6>[ 0.223327] pm_gpio_probe: OK: base=173, ngpio=40 <6>[ 0.223541] pm8xxx_mpp_probe: OK: base=213, ngpio=12 <6>[ 0.224426] pm8901_probe: PMIC REVISION = F4 <6>[ 0.224761] pm8xxx_mpp_probe: OK: base=225, ngpio=4 <3>[ 0.537963] msm_snddev_init <3>[ 0.538574] Registering a6_0 device. <6>[ 0.552612] bio: create slab at 0 <6>[ 0.553894] ION heap vmalloc created <6>[ 0.553955] ION heap mm created at 38800000 with size 3600000 <6>[ 0.553985] ION heap mm_fw created at 38600000 with size 200000 <6>[ 0.554046] ION heap mfc created at 3be00000 with size 2000 <6>[ 0.554107] ION heap sf created at 75e00000 with size 4000000 <6>[ 0.554168] ION heap camera_preview created at 79e00000 with size 4000000 <6>[ 0.554260] ION heap wb created at 7de00000 with size 600000 <6>[ 0.554321] ION heap qsecom created at 7e400000 with size 600000 <6>[ 0.554351] ION heap audio created at 7ea00000 with size 28b000 <5>[ 0.554504] pmic8058_pwm_probe: OK <6>[ 0.554565] klog_init: phys buffer at 0x7ff00000 <6>[ 0.554626] klog_init: virt address at 0xbfe00000 <6>[ 0.554656] klog_init: found valid klog, len 1048576 <6>[ 0.554718] klog_init: using buffer 3 at 0xbfec0000, length 262116 <5>[ 0.555877] SCSI subsystem initialized <6>[ 0.556091] usbcore: registered new interface driver usbfs <6>[ 0.556213] usbcore: registered new interface driver hub <6>[ 0.556457] usbcore: registered new device driver usb <6>[ 0.556762] Advanced Linux Sound Architecture Driver Version 1.0.24. <6>[ 0.557250] Bluetooth: Core ver 2.16 <6>[ 0.557342] NET: Registered protocol family 31 <6>[ 0.557403] Bluetooth: HCI device and connection manager initialized <6>[ 0.557495] Bluetooth: HCI socket layer initialized <6>[ 0.557647] Switching to clocksource gp_timer <6>[ 0.571716] NET: Registered protocol family 2 <6>[ 0.571899] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) <6>[ 0.572296] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) <6>[ 0.573516] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) <6>[ 0.574218] TCP: Hash tables configured (established 131072 bind 65536) <6>[ 0.574310] TCP reno registered <6>[ 0.574371] UDP hash table entries: 512 (order: 2, 16384 bytes) <6>[ 0.574462] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) <6>[ 0.574890] NET: Registered protocol family 1 <6>[ 0.575317] RPC: Registered named UNIX socket transport module. <6>[ 0.575408] RPC: Registered udp transport module. <6>[ 0.575469] RPC: Registered tcp transport module. <6>[ 0.575531] RPC: Registered tcp NFSv4.1 backchannel transport module. <6>[ 0.575744] Trying to unpack rootfs image as initramfs... <6>[ 0.699310] Freeing initrd memory: 2816K <6>[ 0.699523] PMU: registered new PMU device of type 0 <6>[ 0.699707] PMU: registered new PMU device of type 1 <6>[ 0.700164] ETM/ETB intialized. <6>[ 0.700347] pil_qdsp6v3 pil_qdsp6v3: using non-secure boot <3>[ 0.701019] smd_channel_probe_worker: allocation table not initialized <7>[ 0.705566] gpio_request: gpio-229 (msm_icodec_speaker_right) status -22 <3>[ 0.705657] initialize_msm_icodec_gpios: icodec gpio 229 request failed <3>[ 0.705749] msm_icodec_gpio_probe: GPIO configuration failed <6>[ 0.708374] Powering off BT - ignored <5>[ 0.709472] msm_rpm_log_probe: OK <6>[ 0.709838] audit: initializing netlink socket (disabled) <5>[ 0.709930] type=2000 audit(0.680:1): initialized <6>[ 0.787078] ashmem: initialized <6>[ 0.793060] fuse init (API version 7.16) <6>[ 0.793304] msgmni has been set to 1612 <6>[ 0.794708] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) <6>[ 0.794799] io scheduler noop registered <6>[ 0.794860] io scheduler deadline registered <6>[ 0.794921] io scheduler row registered (default) <6>[ 0.795013] io scheduler cfq registered <4>[ 0.797149] mdp4_csc_config: Block type 10 isn't supported by CSC. <4>[ 0.797241] mdp4_csc_config: Block type 8 isn't supported by CSC. <3>[ 0.800537] lcdc_lg_panel_init: called <6>[ 0.800903] Lcdc_lg_probe: bl_pwm0=b570d600 LPG_chan0=0 <6>[ 0.804901] mdp4_lcdc_vsync_init: ndx=0 <6>[ 0.809387] FrameBuffer[0] 1024x768 size=6291456 bytes is registered successfully! <3>[ 0.809478] pm_runtime: fail to wake up <3>[ 0.809539] lcdc_common_panel_power: on=1 isOn=0 <4>[ 0.831512] mdp4_csc_config: Block type 10 isn't supported by CSC. <4>[ 0.831573] mdp4_csc_config: Block type 8 isn't supported by CSC. <4>[ 0.834503] load_565rle_image: Can not open /initlogo.rle <7>[ 0.834808] Registered led device: lcd-backlight <6>[ 0.834899] mdp4_lcdc_vsync_init: ndx=0 <6>[ 0.835784] <6>[ 0.835815] msm_vidc_enc: Inside vid_enc_init() <6>[ 0.836029] <6>[ 0.836059] msm_vidc_enc: Inside vid_enc_vcd_init() <3>[ 0.907104] msm_serial_hs_init failed to load <6>[ 0.907257] msm_serial_hsl: detected port #0 <6>[ 0.907409] msm_serial_hsl.0: ttyHSL0 at MMIO 0x19c40000 (irq = 227) is a MSM <6>[ 0.908081] msm_serial_hsl: driver initialized <6>[ 0.909301] msm_rotator_probe: rotator_hw_revision=1 <6>[ 0.915527] kgsl kgsl-3d0: |kgsl_gpummu_init| MMU type set for device is GPUMMU <6>[ 0.916992] kgsl kgsl-2d0: |kgsl_gpummu_init| MMU type set for device is GPUMMU <6>[ 0.918243] kgsl kgsl-2d1: |kgsl_gpummu_init| MMU type set for device is GPUMMU <6>[ 0.923156] brd: module loaded <6>[ 0.925170] loop: module loaded <6>[ 0.925384] pmem: Initializing pmem_adsp (user-space) as non-cached <6>[ 0.925781] allocating 6291456 bytes at (null) (7ec8b000 physical) for pmem_adsp <6>[ 0.925933] pmem: Initializing pmem_audio (user-space) as non-cached <6>[ 0.926177] allocating 2666496 bytes at (null) (7f28b000 physical) for pmem_audio <5>[ 0.926574] pm8xxx_upl_probe: OK <4>[ 0.928039] hsuart_tty:created 'ttyHS0' device on UART 0 <4>[ 0.928222] user-pins: configuring irq for gpio 129 <6>[ 0.928619] Initialize hres_counter device <6>[ 0.928741] Before a6 call to i2c_add_driver. <3>[ 0.929901] a6_init_state: enabling A6 internal wake. <3>[ 0.929992] a6_init_state: TS2_I2C_WAKEUP_PERIOD = 0x1b <6>[ 0.981353] A6 Version: HW: 255, FW (M.m.B): 2.13.25, ManID: 28769, ProdTyp: 1281 <5>[ 1.008361] A6 driver initialized successfully! <3>[ 1.009521] a6_init_state: enabling A6 internal wake. <3>[ 1.009643] a6_init_state: TS2_I2C_WAKEUP_PERIOD = 0x1b <6>[ 1.061431] A6 Version: HW: 255, FW (M.m.B): 2.7.29, ManID: 28769, ProdTyp: 1793 <5>[ 1.064880] A6 driver initialized successfully! <4>[ 1.064971] i2c-core: driver [a6] using legacy suspend method <4>[ 1.065063] i2c-core: driver [a6] using legacy resume method <3>[ 1.065490] msm_wm8958_setup_power: codec power setup <3>[ 1.065582] wm8994_ldo_power: Power up the WM8994 LDOs <6>[ 1.096954] wm8994 4-001a: WM8958 revision B <4>[ 1.112396] wm8994 4-001a: No interrupt specified, no interrupts <7>[ 1.112640] gpiochip_find_base: found new base at 501 <3>[ 1.112792] wm8994_resume: CALLED <3>[ 1.112854] wm8994_suspend: CALLED <3>[ 1.117218] msm_wm8958_shutdown_power: codec power shutdown <3>[ 1.117279] wm8994_ldo_power: Power down the WM8994 LDOs <6>[ 1.118499] SCSI Media Changer driver v0.25 <6>[ 1.119323] PPP generic driver version 2.4.2 <6>[ 1.119659] PPP Deflate Compression module registered <6>[ 1.119720] PPP BSD Compression module registered <6>[ 1.121093] PPP MPPE Compression module registered <6>[ 1.121154] NET: Registered protocol family 24 <6>[ 1.121246] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled). <6>[ 1.121368] CSLIP: code copyright 1989 Regents of the University of California. <6>[ 1.121795] tun: Universal TUN/TAP device driver, 1.6 <6>[ 1.121887] tun: (C) 1999-2004 Max Krasnyansky <6>[ 1.122314] usbcore: registered new interface driver asix <6>[ 1.122436] usbcore: registered new interface driver cdc_ether <6>[ 1.122528] usbcore: registered new interface driver net1080 <6>[ 1.122619] usbcore: registered new interface driver cdc_subset <6>[ 1.122741] usbcore: registered new interface driver zaurus <6>[ 1.122833] cdc_ncm: 04-Aug-2011 <6>[ 1.122894] usbcore: registered new interface driver cdc_ncm <6>[ 1.122955] rmnet_init: SMD devices[8] <3>[ 1.128967] Error: Driver 'msm_otg' is already registered, aborting... <6>[ 1.129058] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver <6>[ 1.129302] host driver registered w/ tranceiver <6>[ 1.129455] usbcore: registered new interface driver cdc_acm <6>[ 1.129547] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters <6>[ 1.129638] Initializing USB Mass Storage driver... <6>[ 1.129730] usbcore: registered new interface driver usb-storage <6>[ 1.129821] USB Mass Storage support registered. <6>[ 1.129913] usbcore: registered new interface driver usb_ehset_test <6>[ 1.130218] peripheral driver registered w/ tranceiver <4>[ 1.130462] msm_otg_sm_work 1816 id=0 OTG_STATE_UNDEFINED <6>[ 1.132629] android_usb gadget: Mass Storage Function, version: 2009/09/11 <6>[ 1.132751] android_usb gadget: Number of LUNs=2 <6>[ 1.132812] lun0: LUN: removable file: (no medium) <6>[ 1.132873] lun1: LUN: removable file: (no medium) <6>[ 1.133209] android_usb gadget: android_usb ready <4>[ 1.133514] mousedev: could not register psaux device, error: -16 <6>[ 1.133605] mousedev: PS/2 mouse device common for all mice <6>[ 1.134246] input: gpio-keys as /devices/platform/gpio-keys/input/input0 <3>[ 1.136291] board_cy8ctma395_vdd_enable: enable=1 isPowerOn=0 <6>[ 1.148254] input: pmic8xxx_pwrkey as /devices/platform/msm_ssbi.0/pm8058-core/pm8xxx-pwrkey/input/input1 <6>[ 1.149078] <6>lsm303dlh magnetometer driver <3>[ 1.149169] lsm303dlh_mag_sysfs: probe start <6>[ 1.149719] input: lsm303dlh_mag_sysfs as /devices/i2c-0/0-001e/input/input2 <6>[ 1.150115] lsm303dlh_mag_sysfs 0-001e: lsm303dlh_mag probed <7>[ 1.150238] lsm303dlh_acc_sysfs accelerometer driver: init <6>[ 1.150360] lsm303dlh_acc_sysfs: probe start. <6>[ 1.150421] lsm303dlh_acc_sysfs: hw init start <6>[ 1.151245] lsm303dlh_acc_sysfs: hw init done <6>[ 1.151733] input: lsm303dlh_acc_sysfs as /devices/i2c-0/0-0018/input/input3 <6>[ 1.152160] lsm303dlh_acc_sysfs 0-0018: lsm303dlh_acc_sysfs: probed <4>[ 1.152252] i2c-core: driver [lsm303dlh_acc_sysfs] using legacy suspend method <4>[ 1.152343] i2c-core: driver [lsm303dlh_acc_sysfs] using legacy resume method <6>[ 1.154510] input: isl29023 light sensor as /devices/virtual/input/input4 <6>[ 1.154907] isl29023 0-0044: driver version 1.0 enabled <4>[ 1.154998] i2c-core: driver [isl29023] using legacy suspend method <4>[ 1.155090] i2c-core: driver [isl29023] using legacy resume method <6>[ 1.155181] i2c i2c-0: mpu3050: +lsm303dlha <6>[ 1.155242] i2c i2c-0: mpu3050: +lsm303dlhm <4>[ 1.155303] i2c i2c-0: WARNING: Compass irq not assigned <4>[ 1.155395] i2c i2c-0: mpu3050: No Pressure Present <6>[ 1.169464] i2c i2c-0: Installing irq using 381 <6>[ 1.169555] i2c i2c-0: Module Param interface = mpuirq <4>[ 1.169982] i2c-core: driver [mpu3050] using legacy suspend method <4>[ 1.170074] i2c-core: driver [mpu3050] using legacy resume method <7>[ 1.170166] mpu_init <6>[ 1.171264] using rtc device, pm8xxx_rtc, for alarms <6>[ 1.171356] rtc-pm8xxx rtc-pm8xxx: rtc core: registered pm8xxx_rtc as rtc0 <6>[ 1.171661] i2c /dev entries driver <6>[ 1.172790] Linux video capture interface: v2.00 <6>[ 1.172943] usbcore: registered new interface driver uvcvideo <6>[ 1.173034] USB Video Class driver (v1.1.0) <4>[ 1.173461] +++ config_camera_on_gpios_web_cam_mt9m113 <4>[ 1.173858] config_camera_on_gpios_web_cam_mt9m113:enable the regulator votg_lvs0 succeed <4>[ 1.174530] config_camera_on_gpios_web_cam_mt9m113:enable the regulator votg_vreg_l11 succeed <4>[ 1.174652] --- config_camera_on_gpios_web_cam_mt9m113 <4>[ 1.241027] +++ config_camera_off_gpios_web_cam_mt9m113 <4>[ 1.241363] config_camera_off_gpios_web_cam_mt9m113:disable the regulator: votg_lvs0 succeed <4>[ 1.241760] config_camera_off_gpios_web_cam_mt9m113:disable the regulator: votg_vreg_l11 succeed <4>[ 1.241882] --- config_camera_off_gpios_web_cam_mt9m113 <6>[ 1.241973] msm_sync_init: initialized mt9m113 <6>[ 1.242980] msm_gemini_init gemini: success <6>[ 1.243255] max8903b driver registeration! rc = 0 <5>[ 1.258209] tsens_tm_probe: OK <6>[ 1.258636] device-mapper: uevent: version 1.0.3 <6>[ 1.259094] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com <6>[ 1.259338] Bluetooth: MSM Sleep Mode Driver Ver 1.1 <6>[ 1.259948] cpuidle: using governor ladder <6>[ 1.260009] cpuidle: using governor menu <6>[ 1.260406] mmc0: mci-version: 0 <3>[ 1.260528] mmc0: No card detect facilities available <6>[ 1.260772] mmc0: Qualcomm MSM SDCC-core at 0x0000000012400000 irq 136,0 dma 18 dmacrcri 1 <6>[ 1.260894] mmc0: 8 bit data mode enabled <6>[ 1.260955] mmc0: 4 bit data mode disabled <6>[ 1.260986] mmc0: polling status mode disabled <6>[ 1.261047] mmc0: MMC clock 400000 -> 48000000 Hz, PCLK 0 Hz <6>[ 1.261138] mmc0: Slot eject status = 0 <6>[ 1.261169] mmc0: Power save feature enable = 1 <6>[ 1.261230] mmc0: DM non-cached buffer at ffda0000, dma_addr 0x747e0000 <6>[ 1.261322] mmc0: DM cmd busaddr 0x747e0000, cmdptr busaddr 0x747f7f40 <6>[ 1.261627] mmc1: mci-version: 0 <3>[ 1.263305] mmc1: No card detect facilities available <6>[ 1.263549] mmc1: Qualcomm MSM SDCC-core at 0x00000000121c0000 irq 133,0 dma 21 dmacrcri 5 <6>[ 1.263671] mmc1: 8 bit data mode disabled <6>[ 1.263732] mmc1: 4 bit data mode enabled <6>[ 1.263763] mmc1: polling status mode disabled <6>[ 1.263824] mmc1: MMC clock 400000 -> 48000000 Hz, PCLK 0 Hz <6>[ 1.263916] mmc1: Slot eject status = 0 <6>[ 1.263946] mmc1: Power save feature enable = 1 <6>[ 1.264007] mmc1: DM non-cached buffer at ffd80000, dma_addr 0x74000000 <6>[ 1.264099] mmc1: DM cmd busaddr 0x74000000, cmdptr busaddr 0x74017f40 <4>[ 1.264190] tenderloin_probe_wifi: id 4 mmc b45a6000 <7>[ 1.264678] LM8502 module init called <7>[ 1.264770] LM8502 probe called <4>[ 1.358459] msm_otg_sm_work 1819 id=1 OTG_STATE_UNDEFINED <3>[ 1.365051] qup_i2c qup_i2c.3: QUP: I2C status flags :0x1363c8, irq:193 <3>[ 1.365142] qup_i2c qup_i2c.3: I2C slave addr:0x33 not connected <3>[ 1.365234] Unable to read LM8502 registers <7>[ 1.367645] Registered led device: core_navi_left <7>[ 1.368469] Registered led device: core_navi_right <4>[ 1.369995] i2c-core: driver [LM8502] using legacy suspend method <4>[ 1.370086] i2c-core: driver [LM8502] using legacy resume method <6>[ 1.371551] usbcore: registered new interface driver usbhid <6>[ 1.371612] usbhid: USB HID core driver <6>[ 1.372253] logger: created 512K log 'log_main' <6>[ 1.372436] logger: created 256K log 'log_events' <6>[ 1.372619] logger: created 512K log 'log_radio' <6>[ 1.372802] logger: created 256K log 'log_system' <6>[ 1.373474] zram: Created 1 device(s) ... <6>[ 1.373962] usbcore: registered new interface driver snd-usb-audio <6>[ 1.374847] msm-cpu-dai msm-cpu-dai.0: asoc_msm_cpu_probe: dev name msm-cpu-dai.0 <6>[ 1.375091] msm-codec-dai msm-codec-dai.0: asoc_msm_codec_probe: dev name msm-codec-dai.0 <6>[ 1.375335] msm-dsp-audio msm-dsp-audio.0: msm_pcm_probe: dev name msm-dsp-audio.0 <3>[ 1.375762] wm8994_resume: CALLED <3>[ 1.375823] msm_wm8958_setup_power: codec power setup <3>[ 1.375915] wm8994_ldo_power: Power up the WM8994 LDOs <6>[ 1.380493] mmc0: new high speed MMC card at address 0001 <6>[ 1.380981] mmcblk0: mmc0:0001 SEM16G 14.8 GiB <6>[ 1.381256] mmcblk0boot0: mmc0:0001 SEM16G partition 1 1.00 MiB <6>[ 1.381530] mmcblk0boot1: mmc0:0001 SEM16G partition 2 1.00 MiB <6>[ 1.387939] mmcblk0: p1 p2 p3 p4 < p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 > <6>[ 1.394622] mmcblk0boot1: unknown partition table <6>[ 1.396759] mmcblk0boot0: unknown partition table <6>[ 1.399353] a6_update_connected_ps: ac=0 usb=0 dock=0 <6>[ 1.399444] max8903b_current_setup: ### CHARGE_DISABLE <6>[ 1.400177] msm_otg_suspend: usb in low power mode <6>[ 1.644653] Headphone switch initialized, plugged=0 <6>[ 1.648040] asoc: wm8994-aif1 <-> msm-cpu-dai.0 mapping ok <6>[ 1.649261] asoc: wm8994-aif2 <-> msm-cpu-dai.0 mapping ok <6>[ 1.650207] input: msm-audio headset as /devices/platform/soc-audio/sound/card0/input5 <6>[ 1.650756] mvs-cpu-dai mvs-cpu-dai.0: asoc_mvs_cpu_probe: dev name mvs-cpu-dai.0 <6>[ 1.651000] mvs-codec-dai mvs-codec-dai.0: asoc_mvs_codec_probe: dev name mvs-codec-dai.0 <6>[ 1.651245] msm-mvs-audio msm-mvs-audio.0: msm_pcm_probe: dev name msm-mvs-audio.0 <6>[ 1.652374] ALSA device list: <6>[ 1.652404] #0: msm-audio <6>[ 1.652709] oprofile: using arm/armv7-scorpionmp <6>[ 1.652862] GACT probability NOT on <6>[ 1.652923] Mirror/redirect action on <6>[ 1.652984] u32 classifier <6>[ 1.653015] Actions configured <6>[ 1.653076] Netfilter messages via NETLINK v0.30. <6>[ 1.653198] nf_conntrack version 0.5.0 (12901 buckets, 51604 max) <6>[ 1.653686] ctnetlink v0.93: registering with nfnetlink. <6>[ 1.653808] NF_TPROXY: Transparent proxy support initialized, version 4.1.0 <6>[ 1.653900] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd. <6>[ 1.654541] xt_time: kernel timezone is -0000 <6>[ 1.654754] ip_tables: (C) 2000-2006 Netfilter Core Team <6>[ 1.655029] arp_tables: (C) 2002 David S. Miller <6>[ 1.655120] TCP cubic registered <6>[ 1.655151] Initializing XFRM netlink socket <6>[ 1.655670] NET: Registered protocol family 10 <6>[ 1.656707] Mobile IPv6 <6>[ 1.656768] ip6_tables: (C) 2000-2006 Netfilter Core Team <6>[ 1.656951] IPv6 over IPv4 tunneling driver <6>[ 1.657745] NET: Registered protocol family 17 <6>[ 1.657836] NET: Registered protocol family 15 <6>[ 1.657928] L2TP core driver, V2.0 <6>[ 1.657958] PPPoL2TP kernel driver, V2.0 <6>[ 1.658020] L2TP IP encapsulation support (L2TPv3) <6>[ 1.658264] L2TP netlink interface <6>[ 1.658355] NET: Registered protocol family 35 <5>[ 1.658477] Registering the dns_resolver key type <6>[ 1.658569] VFP support v0.3: implementor 51 architecture 64 part 2d variant 0 rev 0 <5>[ 1.658691] Registering SWP/SWPB emulation handler <6>[ 1.665832] clock_late_init() disabled 202 unused clocks <6>[ 1.666534] cpufreq: cpu0 init at 1512000 switching to 1188000 <6>[ 1.667419] cpufreq: cpu1 init at 1512000 switching to 1188000 <6>[ 1.672302] MSM Watchdog Initialized <3>[ 1.672943] set_dload_mode <0> ( 80015308 ) <6>[ 1.674072] rtc-pm8xxx rtc-pm8xxx: setting system clock to 2014-05-17 10:58:17 UTC (1400324297) <6>[ 1.674194] msm_v4l2: msm_v4l2_init <4>[ 1.674652] Warning: unable to open an initial console. <6>[ 1.675079] Freeing init memory: 304K <3>[ 1.681213] init: invalid uid 'fm_radio' <3>[ 1.681518] init: invalid uid 'felicaclient' <3>[ 1.681610] init: invalid uid 'felicaclient' <3>[ 1.681671] init: invalid uid 'felicalock' <3>[ 1.681732] init: invalid uid 'felicaclient' <3>[ 1.681793] init: invalid uid 'felicaclient' <3>[ 1.681854] init: invalid uid 'felicaclient' <3>[ 1.681915] init: invalid uid 'felicaclient' <3>[ 1.681976] init: invalid uid 'felicaclient' <3>[ 1.682067] init: invalid uid 'autobot_access' <3>[ 2.004028] init: cannot open '/initlogo.rle' <6>[ 2.011230] kjournald starting. Commit interval 5 seconds <4>[ 2.011627] EXT3-fs (mmcblk0p13): warning: maximal mount count reached, running e2fsck is recommended <6>[ 2.019378] EXT3-fs (mmcblk0p13): using internal journal <6>[ 2.019592] EXT3-fs (mmcblk0p13): mounted filesystem with writeback data mode <3>[ 2.987060] android_usb: already disabled <3>[ 2.988098] init: Unable to open persistent property directory /data/property errno: 2 <3>[ 3.200805] android_usb: already disabled <3>[ 3.221160] board_cy8ctma395_vdd_enable: enable=1 isPowerOn=1 <6>[ 3.221527] adb_open <6>[ 3.221588] adb_bind_config <6>[ 3.395324] input: HPTouchpad as /devices/virtual/input/input6 <6>[ 3.446624] lsm303dlh_acc_sysfs: hw init start <6>[ 3.447784] lsm303dlh_acc_sysfs: hw init done <6>[ 3.783020] EXT4-fs (dm-9): recovery complete <6>[ 3.784576] EXT4-fs (dm-9): mounted filesystem with ordered data mode. Opts: (null) <4>[ 4.217407] EXT4-fs (dm-10): warning: maximal mount count reached, running e2fsck is recommended <6>[ 4.240356] EXT4-fs (dm-10): recovery complete <6>[ 4.242431] EXT4-fs (dm-10): mounted filesystem with ordered data mode. Opts: (null) <4>[ 4.338256] EXT4-fs (dm-10): warning: maximal mount count reached, running e2fsck is recommended <6>[ 4.344085] EXT4-fs (dm-10): mounted filesystem with ordered data mode. Opts: (null) <6>[ 6.498870] msmsdcc_runtime_suspend: Enter WIFI suspend <6>[ 7.860321] EXT4-fs (dm-8): mounted filesystem with ordered data mode. Opts: (null) <6>[ 9.288818] [set_pmic_backlight] backlight enabled <6>[ 17.400207] EXT4-fs (dm-9): mounted filesystem with ordered data mode. Opts: (null) <6>[ 17.714660] EXT3-fs: barriers not enabled <6>[ 17.715393] kjournald starting. Commit interval 5 seconds <4>[ 17.715515] EXT3-fs (mmcblk0p13): warning: maximal mount count reached, running e2fsck is recommended <6>[ 17.720001] EXT3-fs (mmcblk0p13): using internal journal <6>[ 17.720062] EXT3-fs (mmcblk0p13): mounted filesystem with writeback data mode <6>[ 18.570678] EXT4-fs (dm-8): mounted filesystem with ordered data mode. Opts: (null) <6>[ 23.771423] EXT4-fs (dm-8): mounted filesystem with ordered data mode. Opts: (null) <4>[ 24.061706] Disabling non-boot CPUs ... <0>[ 24.061828] Restarting system. <4>[ 24.061920] <0>[ 24.061981] Restarting Linux version 3.0.101-cyanogenmod-gee9eb08 (flintman@mx.thenoblealliance.com) (gcc version 4.7 (GCC) ) #2 SMP PREEMPT Fri Apr 25 06:21:30 EDT 2014 <0>[ 24.062347] <3>[ 24.063171] set_dload_mode <0> ( 80167248 ) <3>[ 24.063415] set_dload_mode <0> ( 80167250 ) <5>[ 24.063629] Going down for restart now <3>[ 24.063842] pm8xxx_reset_pwr_off, [1] <3>[ 24.064056] pm8xxx_reset_pwr_off, [2] <3>[ 24.064270] pm8xxx_reset_pwr_off, [3] <3>[ 24.064514] pm8xxx_reset_pwr_off, [4] <3>[ 24.064727] pm8xxx_reset_pwr_off, [5] <3>[ 24.072937] pm8xxx_reset_pwr_off, [6] <3>[ 24.073150] pm8xxx_reset_pwr_off, [7] <3>[ 24.073364] pm8xxx_reset_pwr_off, [8] <6>[ 24.073577] arch_reset: Initiating reboot via bootloader Broadcasting: Intent { act=com.evervolv.toolbox.action.DUMPLOGCAT_FINISHED (has extras) } *** /system/bin/am: Timed out after 5.0s (killing pid 7786)