------ KERNEL LOG (dmesg) ------
51156] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
<3>[  472.451182] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
<7>[  472.452075] lm8502_mod_brightness: set LED2 brightness (0) percent
<7>[  472.452482] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[  472.465910] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[  472.466948] lm8502_mod_brightness: set LED2 brightness (0) percent
<3>[  472.471409] msm_wm8958_shutdown_power: codec power shutdown
<3>[  472.471447] wm8994_ldo_power: Power down the WM8994 LDOs
<3>[  472.471623] wm8994 4-001a: - MEOW wm8994_device_suspend
<6>[  472.474642] btuart_pin_mux: off
<4>[  472.482011] max8903b_suspend: suspend
<6>[  472.485352] PM: suspend of devices complete after 82.053 msecs
<6>[  472.487225] PM: late suspend of devices complete after 1.833 msecs
<4>[  472.487254] Disabling non-boot CPUs ...
<4>[  472.608655] gic_show_resume_irq: 48 triggered
<4>[  472.608655] gic_show_resume_irq: 52 triggered
<4>[  472.608655] msm_gpio_show_resume_irq: irq 293/gpio 37 triggered wake
<4>[  472.608802] Enabling non-boot CPUs ...
<3>[  472.691605] lsm303dlh_mag_sysfs 0-001e: read transfer error
<3>[  472.691636] lsm303dlh_mag_sysfs 0-001e: get_magnetometer_data failed
<4>[  472.702503] CPU1 is up
<6>[  472.703103] PM: early resume of devices complete after 0.562 msecs
<6>[  472.769512] wakeup wake lock: mmc_delayed_work
<4>[  472.770277] mmc1: queuing unknown CIS tuple 0x01 (3 bytes)
<4>[  472.771409] mmc1: queuing unknown CIS tuple 0x1a (5 bytes)
<4>[  472.772022] mmc1: queuing unknown CIS tuple 0x1b (8 bytes)
<4>[  472.772150] mmc1: queuing unknown CIS tuple 0x14 (0 bytes)
<4>[  472.772681] max8903b_resume: resume
<3>[  472.815201] pm_op(): platform_pm_resume+0x0/0x4c returns -22
<3>[  472.815236] PM: Device kgsl-2d1.1 failed to resume: error -22
<6>[  472.815333] btuart_pin_mux: on
<6>[  472.815366] btuart_deassert_rts: 0(get)
<6>[  472.815389] btuart_deassert_rts: 0(get)
<6>[  472.815412] btuart_deassert_rts: 0(get)
<3>[  472.820352] msm_wm8958_setup_power: codec power setup
<3>[  472.820422] wm8994_ldo_power: Power up the WM8994 LDOs
<7>[  472.872247] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[  472.873077] lm8502_mod_brightness: set LED2 brightness (0) percent
<6>[  472.882334] PM: resume of devices complete after 178.833 msecs
<7>[  472.992977] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[  472.993403] lm8502_mod_brightness: set LED2 brightness (0) percent
<4>[  473.085222] Restarting tasks ... done.
<6>[  473.106485] suspend: exit suspend, ret = 0 (2014-02-27 22:57:07.726003408 UTC)
<3>[  473.142422] wm8994-codec wm8994-codec: - MEOW wm8994_resume
<6>[  473.198488] PM: Syncing filesystems ... skipped for target platform ... done.
<4>[  473.206730] Freezing user space processes ... (elapsed 0.02 seconds) done.
<4>[  473.233313] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
<4>[  473.253239] Suspending console(s) (use no_console_suspend to debug)
<3>[  473.270006] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
<3>[  473.270018] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
<3>[  473.270027] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
<3>[  473.278106] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
<3>[  473.278116] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
<3>[  473.278125] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
<7>[  473.278621] lm8502_mod_brightness: set LED2 brightness (0) percent
<7>[  473.278944] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[  473.283514] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[  473.284308] lm8502_mod_brightness: set LED2 brightness (0) percent
<3>[  473.288396] msm_wm8958_shutdown_power: codec power shutdown
<3>[  473.288411] wm8994_ldo_power: Power down the WM8994 LDOs
<3>[  473.288432] wm8994 4-001a: - MEOW wm8994_device_suspend
<6>[  473.289718] btuart_pin_mux: off
<4>[  473.292721] max8903b_suspend: suspend
<6>[  473.294529] PM: suspend of devices complete after 30.930 msecs
<6>[  473.295380] PM: late suspend of devices complete after 0.834 msecs
<4>[  473.295392] Disabling non-boot CPUs ...
<4>[  473.374024] gic_show_resume_irq: 48 triggered
<4>[  473.374024] gic_show_resume_irq: 52 triggered
<4>[  473.374024] msm_gpio_show_resume_irq: irq 293/gpio 37 triggered wake
<4>[  473.374090] Enabling non-boot CPUs ...
<4>[  473.471879] CPU1 is up
<6>[  473.472233] PM: early resume of devices complete after 0.337 msecs
<6>[  473.538519] wakeup wake lock: mmc_delayed_work
<4>[  473.538874] mmc1: queuing unknown CIS tuple 0x01 (3 bytes)
<4>[  473.539347] mmc1: queuing unknown CIS tuple 0x1a (5 bytes)
<4>[  473.539557] mmc1: queuing unknown CIS tuple 0x1b (8 bytes)
<4>[  473.539607] mmc1: queuing unknown CIS tuple 0x14 (0 bytes)
<4>[  473.539848] max8903b_resume: resume
<3>[  473.573617] pm_op(): platform_pm_resume+0x0/0x4c returns -22
<3>[  473.573630] PM: Device kgsl-2d1.1 failed to resume: error -22
<6>[  473.573668] btuart_pin_mux: on
<6>[  473.573682] btuart_deassert_rts: 0(get)
<6>[  473.573690] btuart_deassert_rts: 0(get)
<6>[  473.573699] btuart_deassert_rts: 0(get)
<3>[  473.577290] msm_wm8958_setup_power: codec power setup
<3>[  473.577321] wm8994_ldo_power: Power up the WM8994 LDOs
<7>[  473.625914] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[  473.626576] lm8502_mod_brightness: set LED2 brightness (0) percent
<6>[  473.630506] PM: resume of devices complete after 158.067 msecs
<7>[  473.732438] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[  473.732778] lm8502_mod_brightness: set LED2 brightness (0) percent
<4>[  473.812807] Restarting tasks ... done.
<6>[  473.832447] suspend: exit suspend, ret = 0 (2014-02-27 22:57:21.703301184 UTC)
<3>[  473.862083] wm8994-codec wm8994-codec: - MEOW wm8994_resume
<6>[  473.920644] PM: Syncing filesystems ... skipped for target platform ... done.
<4>[  473.927004] Freezing user space processes ... (elapsed 0.02 seconds) done.
<4>[  473.955929] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
<4>[  473.975849] Suspending console(s) (use no_console_suspend to debug)
<3>[  473.997942] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
<3>[  473.997955] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
<3>[  473.997966] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
<3>[  474.007316] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
<3>[  474.007327] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
<3>[  474.007337] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
<7>[  474.007864] lm8502_mod_brightness: set LED2 brightness (0) percent
<7>[  474.008192] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[  474.013504] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[  474.014327] lm8502_mod_brightness: set LED2 brightness (0) percent
<3>[  474.018496] msm_wm8958_shutdown_power: codec power shutdown
<3>[  474.018512] wm8994_ldo_power: Power down the WM8994 LDOs
<3>[  474.018534] wm8994 4-001a: - MEOW wm8994_device_suspend
<6>[  474.019962] btuart_pin_mux: off
<4>[  474.024032] max8903b_suspend: suspend
<6>[  474.025918] PM: suspend of devices complete after 34.558 msecs
<6>[  474.026872] PM: late suspend of devices complete after 0.936 msecs
<4>[  474.026885] Disabling non-boot CPUs ...
<4>[  474.144269] gic_show_resume_irq: 48 triggered
<4>[  474.144269] gic_show_resume_irq: 52 triggered
<4>[  474.144269] msm_gpio_show_resume_irq: irq 293/gpio 37 triggered wake
<4>[  474.144269] msm_gpio_show_resume_irq: irq 344/gpio 88 triggered wake
<4>[  474.144269] pm8058_show_resume_irq:480 triggered
<4>[  474.144343] Enabling non-boot CPUs ...
<4>[  474.242012] CPU1 is up
<6>[  474.242379] PM: early resume of devices complete after 0.349 msecs
<6>[  474.242588] wakeup wake lock: event1-546
<3>[  474.261573] lsm303dlh_mag_sysfs 0-001e: read transfer error
<3>[  474.261585] lsm303dlh_mag_sysfs 0-001e: get_magnetometer_data failed
<4>[  474.308888] mmc1: queuing unknown CIS tuple 0x01 (3 bytes)
<4>[  474.309413] mmc1: queuing unknown CIS tuple 0x1a (5 bytes)
<4>[  474.309646] mmc1: queuing unknown CIS tuple 0x1b (8 bytes)
<4>[  474.309703] mmc1: queuing unknown CIS tuple 0x14 (0 bytes)
<4>[  474.309964] max8903b_resume: resume
<3>[  474.344652] pm_op(): platform_pm_resume+0x0/0x4c returns -22
<3>[  474.344666] PM: Device kgsl-2d1.1 failed to resume: error -22
<6>[  474.344709] btuart_pin_mux: on
<6>[  474.344724] btuart_deassert_rts: 0(get)
<6>[  474.344734] btuart_deassert_rts: 0(get)
<6>[  474.344744] btuart_deassert_rts: 0(get)
<3>[  474.348527] msm_wm8958_setup_power: codec power setup
<3>[  474.348563] wm8994_ldo_power: Power up the WM8994 LDOs
<7>[  474.397353] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[  474.398028] lm8502_mod_brightness: set LED2 brightness (0) percent
<6>[  474.401841] PM: resume of devices complete after 159.066 msecs
<7>[  474.495063] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[  474.495411] lm8502_mod_brightness: set LED2 brightness (0) percent
<4>[  474.607744] Restarting tasks ... done.
<6>[  474.622929] suspend: exit suspend, ret = 0 (2014-02-27 22:57:23.721936593 UTC)
<6>[  474.623672] lsm303dlh_acc_sysfs: hw init start
<6>[  474.624645] request_suspend_state: wakeup (3->0) at 474613136642 (2014-02-27 22:57:23.723661778 UTC)
<6>[  474.627147] lsm303dlh_acc_sysfs: hw init done
<3>[  474.652134] wm8994-codec wm8994-codec: - MEOW wm8994_resume
<3>[  474.676425] lcdc_lg_panel_power: l10 ENABLE
<6>[  487.141592] gpio-keys: core navi button pressed
<6>[  487.231601] gpio-keys: core navi button released
<6>[  605.250433] request_suspend_state: sleep (0->3) at 605238899876 (2014-02-27 22:59:34.349421308 UTC)
<3>[  605.281634] lcdc_lg_panel_power: l10 DISABLE
<6>[  605.614904] PM: Syncing filesystems ... skipped for target platform ... done.
<4>[  605.621082] Freezing user space processes ... (elapsed 0.04 seconds) done.
<4>[  605.663679] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
<4>[  605.683338] Suspending console(s) (use no_console_suspend to debug)
<3>[  605.702996] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
<3>[  605.703008] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
<3>[  605.703018] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
<3>[  605.711023] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
<3>[  605.711032] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
<3>[  605.711041] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
<7>[  605.711551] lm8502_mod_brightness: set LED2 brightness (0) percent
<7>[  605.711878] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[  605.716480] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[  605.717273] lm8502_mod_brightness: set LED2 brightness (0) percent
<3>[  605.721376] msm_wm8958_shutdown_power: codec power shutdown
<3>[  605.721390] wm8994_ldo_power: Power down the WM8994 LDOs
<3>[  605.721411] wm8994 4-001a: - MEOW wm8994_device_suspend
<6>[  605.722692] btuart_pin_mux: off
<4>[  605.727655] max8903b_suspend: suspend
<6>[  605.729459] PM: suspend of devices complete after 30.862 msecs
<6>[  605.730323] PM: late suspend of devices complete after 0.847 msecs
<4>[  605.730335] Disabling non-boot CPUs ...
<3>[  605.991548] lsm303dlh_mag_sysfs 0-001e: read transfer error
<3>[  605.991560] lsm303dlh_mag_sysfs 0-001e: get_magnetometer_data failed
<4>[  606.083553] gic_show_resume_irq: 48 triggered
<4>[  606.083553] gic_show_resume_irq: 52 triggered
<4>[  606.083553] msm_gpio_show_resume_irq: irq 293/gpio 37 triggered wake
<4>[  606.083619] Enabling non-boot CPUs ...
<4>[  606.241885] CPU1 is up
<6>[  606.242238] PM: early resume of devices complete after 0.337 msecs
<3>[  606.291555] lsm303dlh_mag_sysfs 0-001e: read transfer error
<3>[  606.291566] lsm303dlh_mag_sysfs 0-001e: get_magnetometer_data failed
<6>[  606.308361] wakeup wake lock: mmc_delayed_work
<4>[  606.308715] mmc1: queuing unknown CIS tuple 0x01 (3 bytes)
<4>[  606.309187] mmc1: queuing unknown CIS tuple 0x1a (5 bytes)
<4>[  606.309397] mmc1: queuing unknown CIS tuple 0x1b (8 bytes)
<4>[  606.309447] mmc1: queuing unknown CIS tuple 0x14 (0 bytes)
<4>[  606.309687] max8903b_resume: resume
<3>[  606.343628] pm_op(): platform_pm_resume+0x0/0x4c returns -22
<3>[  606.343640] PM: Device kgsl-2d1.1 failed to resume: error -22
<6>[  606.343679] btuart_pin_mux: on
<6>[  606.343692] btuart_deassert_rts: 0(get)
<6>[  606.343701] btuart_deassert_rts: 0(get)
<6>[  606.343710] btuart_deassert_rts: 0(get)
<3>[  606.347242] msm_wm8958_setup_power: codec power setup
<3>[  606.347272] wm8994_ldo_power: Power up the WM8994 LDOs
<7>[  606.395998] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[  606.396671] lm8502_mod_brightness: set LED2 brightness (0) percent
<6>[  606.399937] PM: resume of devices complete after 157.495 msecs
<7>[  606.600684] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[  606.606604] lm8502_mod_brightness: set LED2 brightness (0) percent
<4>[  606.606647] Restarting tasks ... done.
<3>[  606.752144] wm8994-codec wm8994-codec: - MEOW wm8994_resume
<6>[  606.831262] suspend: exit suspend, ret = 0 (2014-02-27 22:59:48.932036149 UTC)
<6>[  606.874119] PM: Syncing filesystems ... skipped for target platform ... done.
<4>[  606.880343] Freezing user space processes ... (elapsed 0.02 seconds) done.
<4>[  606.903448] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
<4>[  606.923238] Suspending console(s) (use no_console_suspend to debug)
<3>[  606.939693] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
<3>[  606.939704] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
<3>[  606.939714] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
<3>[  606.947818] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
<3>[  606.947827] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
<3>[  606.947836] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
<7>[  606.948334] lm8502_mod_brightness: set LED2 brightness (0) percent
<7>[  606.948658] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[  606.953244] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[  606.954038] lm8502_mod_brightness: set LED2 brightness (0) percent
<3>[  606.958126] msm_wm8958_shutdown_power: codec power shutdown
<3>[  606.958141] wm8994_ldo_power: Power down the WM8994 LDOs
<3>[  606.958161] wm8994 4-001a: - MEOW wm8994_device_suspend
<6>[  606.959447] btuart_pin_mux: off
<4>[  606.963685] max8903b_suspend: suspend
<6>[  606.965494] PM: suspend of devices complete after 31.918 msecs
<6>[  606.966353] PM: late suspend of devices complete after 0.841 msecs
<4>[  606.966365] Disabling non-boot CPUs ...
<6>[  606.974066] cpufreq: cpu 1 is not active.
<4>[  607.084113] gic_show_resume_irq: 48 triggered
<4>[  607.084113] gic_show_resume_irq: 52 triggered
<4>[  607.084113] msm_gpio_show_resume_irq: irq 344/gpio 88 triggered wake
<4>[  607.084113] pm8058_show_resume_irq:468 triggered
<4>[  607.084179] Enabling non-boot CPUs ...
<4>[  607.181912] CPU1 is up
<6>[  607.182265] PM: early resume of devices complete after 0.337 msecs
<6>[  607.182429] wakeup wake lock: alarm_rtc
<3>[  607.201572] lsm303dlh_mag_sysfs 0-001e: read transfer error
<3>[  607.201583] lsm303dlh_mag_sysfs 0-001e: get_magnetometer_data failed
<4>[  607.248832] mmc1: queuing unknown CIS tuple 0x01 (3 bytes)
<4>[  607.249305] mmc1: queuing unknown CIS tuple 0x1a (5 bytes)
<4>[  607.249516] mmc1: queuing unknown CIS tuple 0x1b (8 bytes)
<4>[  607.249566] mmc1: queuing unknown CIS tuple 0x14 (0 bytes)
<4>[  607.249805] max8903b_resume: resume
<3>[  607.283648] pm_op(): platform_pm_resume+0x0/0x4c returns -22
<3>[  607.283661] PM: Device kgsl-2d1.1 failed to resume: error -22
<6>[  607.283699] btuart_pin_mux: on
<6>[  607.283713] btuart_deassert_rts: 0(get)
<6>[  607.283721] btuart_deassert_rts: 0(get)
<6>[  607.283730] btuart_deassert_rts: 0(get)
<3>[  607.287328] msm_wm8958_setup_power: codec power setup
<3>[  607.287359] wm8994_ldo_power: Power up the WM8994 LDOs
<7>[  607.335964] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[  607.336629] lm8502_mod_brightness: set LED2 brightness (0) percent
<6>[  607.339894] PM: resume of devices complete after 157.340 msecs
<7>[  607.471253] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[  607.471594] lm8502_mod_brightness: set LED2 brightness (0) percent
<4>[  607.542768] Restarting tasks ... done.
<6>[  607.554197] suspend: exit suspend, ret = 0 (2014-02-27 23:00:01.715030074 UTC)
<3>[  607.603733] wm8994-codec wm8994-codec: - MEOW wm8994_resume
<6>[  607.872558] PM: Syncing filesystems ... skipped for target platform ... done.
<4>[  607.878819] Freezing user space processes ... (elapsed 0.01 seconds) done.
<4>[  607.895840] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
<4>[  607.915746] Suspending console(s) (use no_console_suspend to debug)
<3>[  607.934669] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
<3>[  607.934680] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
<3>[  607.934689] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
<3>[  607.942693] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
<3>[  607.942702] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
<3>[  607.942711] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
<7>[  607.943241] lm8502_mod_brightness: set LED2 brightness (0) percent
<7>[  607.943591] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[  607.948159] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[  607.949075] lm8502_mod_brightness: set LED2 brightness (0) percent
<3>[  607.953534] msm_wm8958_shutdown_power: codec power shutdown
<3>[  607.953568] wm8994_ldo_power: Power down the WM8994 LDOs
<3>[  607.953611] wm8994 4-001a: - MEOW wm8994_device_suspend
<6>[  607.956188] btuart_pin_mux: off
<4>[  607.962336] max8903b_suspend: suspend
<6>[  607.964880] PM: suspend of devices complete after 38.741 msecs
<6>[  607.966423] PM: late suspend of devices complete after 1.507 msecs
<4>[  607.966450] Disabling non-boot CPUs ...
<6>[  607.974063] cpufreq: cpu 1 is not active.
<6>[  607.984065] cpufreq: cpu 1 is not active.
<4>[  608.039315] gic_show_resume_irq: 48 triggered
<4>[  608.039315] gic_show_resume_irq: 52 triggered
<4>[  608.039315] msm_gpio_show_resume_irq: irq 344/gpio 88 triggered wake
<4>[  608.039315] pm8058_show_resume_irq:468 triggered
<4>[  608.039502] Enabling non-boot CPUs ...
<3>[  608.111610] lsm303dlh_mag_sysfs 0-001e: read transfer error
<3>[  608.111639] lsm303dlh_mag_sysfs 0-001e: get_magnetometer_data failed
<4>[  608.132374] CPU1 is up
<6>[  608.132872] PM: early resume of devices complete after 0.465 msecs
<6>[  608.133121] wakeup wake lock: alarm_rtc
<4>[  608.199592] mmc1: queuing unknown CIS tuple 0x01 (3 bytes)
<4>[  608.200593] mmc1: queuing unknown CIS tuple 0x1a (5 bytes)
<4>[  608.201041] mmc1: queuing unknown CIS tuple 0x1b (8 bytes)
<4>[  608.201152] mmc1: queuing unknown CIS tuple 0x14 (0 bytes)
<4>[  608.201708] max8903b_resume: resume
<3>[  608.243982] pm_op(): platform_pm_resume+0x0/0x4c returns -22
<3>[  608.244015] PM: Device kgsl-2d1.1 failed to resume: error -22
<6>[  608.244100] btuart_pin_mux: on
<6>[  608.244130] btuart_deassert_rts: 0(get)
<6>[  608.244151] btuart_deassert_rts: 0(get)
<6>[  608.244173] btuart_deassert_rts: 0(get)
<3>[  608.248931] msm_wm8958_setup_power: codec power setup
<3>[  608.248992] wm8994_ldo_power: Power up the WM8994 LDOs
<7>[  608.299960] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[  608.300754] lm8502_mod_brightness: set LED2 brightness (0) percent
<6>[  608.308323] PM: resume of devices complete after 174.945 msecs
<7>[  608.510416] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[  608.515504] lm8502_mod_brightness: set LED2 brightness (0) percent
<4>[  608.521380] Restarting tasks ... done.
<3>[  608.672250] wm8994-codec wm8994-codec: - MEOW wm8994_resume
<6>[  608.771722] suspend: exit suspend, ret = 0 (2014-02-27 23:00:04.964839260 UTC)
<6>[  608.808461] PM: Syncing filesystems ... skipped for target platform ... done.
<4>[  608.815761] Freezing user space processes ... (elapsed 0.02 seconds) done.
<4>[  608.843468] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
<4>[  608.863356] Suspending console(s) (use no_console_suspend to debug)
<3>[  608.882708] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
<3>[  608.882728] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
<3>[  608.882746] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
<3>[  608.897574] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
<3>[  608.897592] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
<3>[  608.897608] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
<7>[  608.898278] lm8502_mod_brightness: set LED2 brightness (0) percent
<7>[  608.898637] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[  608.907122] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[  608.907992] lm8502_mod_brightness: set LED2 brightness (0) percent
<3>[  608.912296] msm_wm8958_shutdown_power: codec power shutdown
<3>[  608.912322] wm8994_ldo_power: Power down the WM8994 LDOs
<3>[  608.912358] wm8994 4-001a: - MEOW wm8994_device_suspend
<6>[  608.914580] btuart_pin_mux: off
<4>[  608.923305] max8903b_suspend: suspend
<6>[  608.925604] PM: suspend of devices complete after 48.674 msecs
<6>[  608.927091] PM: late suspend of devices complete after 1.458 msecs
<4>[  608.927112] Disabling non-boot CPUs ...
<4>[  609.016066] gic_show_resume_irq: 48 triggered
<4>[  609.016066] gic_show_resume_irq: 52 triggered
<4>[  609.016066] msm_gpio_show_resume_irq: irq 293/gpio 37 triggered wake
<4>[  609.016187] Enabling non-boot CPUs ...
<4>[  609.112307] CPU1 is up
<6>[  609.112904] PM: early resume of devices complete after 0.568 msecs
<6>[  609.178793] wakeup wake lock: mmc_delayed_work
<4>[  609.179351] mmc1: queuing unknown CIS tuple 0x01 (3 bytes)
<4>[  609.180140] mmc1: queuing unknown CIS tuple 0x1a (5 bytes)
<4>[  609.180492] mmc1: queuing unknown CIS tuple 0x1b (8 bytes)
<4>[  609.180577] mmc1: queuing unknown CIS tuple 0x14 (0 bytes)
<4>[  609.180954] max8903b_resume: resume
<3>[  609.225999] pm_op(): platform_pm_resume+0x0/0x4c returns -22
<3>[  609.226020] PM: Device kgsl-2d1.1 failed to resume: error -22
<6>[  609.226083] btuart_pin_mux: on
<6>[  609.226105] btuart_deassert_rts: 0(get)
<6>[  609.226119] btuart_deassert_rts: 0(get)
<6>[  609.226134] btuart_deassert_rts: 0(get)
<3>[  609.230441] msm_wm8958_setup_power: codec power setup
<3>[  609.230492] wm8994_ldo_power: Power up the WM8994 LDOs
<7>[  609.280296] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[  609.281021] lm8502_mod_brightness: set LED2 brightness (0) percent
<6>[  609.287409] PM: resume of devices complete after 174.168 msecs
<4>[  609.473029] Restarting tasks ... 
<7>[  609.482092] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[  609.483628] lm8502_mod_brightness: set LED2 brightness (0) percent
<4>[  609.485154] done.
<3>[  609.622248] wm8994-codec wm8994-codec: - MEOW wm8994_resume
<6>[  609.722779] suspend: exit suspend, ret = 0 (2014-02-27 23:00:19.937102222 UTC)
<6>[  609.759970] PM: Syncing filesystems ... skipped for target platform ... done.
<4>[  609.768945] Freezing user space processes ... (elapsed 0.01 seconds) done.
<4>[  609.785873] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
<4>[  609.805760] Suspending console(s) (use no_console_suspend to debug)
<3>[  609.825507] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
<3>[  609.825524] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
<3>[  609.825539] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
<3>[  609.839130] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
<3>[  609.839145] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
<3>[  609.839159] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
<7>[  609.839749] lm8502_mod_brightness: set LED2 brightness (0) percent
<7>[  609.840092] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[  609.846929] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[  609.847781] lm8502_mod_brightness: set LED2 brightness (0) percent
<3>[  609.852009] msm_wm8958_shutdown_power: codec power shutdown
<3>[  609.852030] wm8994_ldo_power: Power down the WM8994 LDOs
<3>[  609.852057] wm8994 4-001a: - MEOW wm8994_device_suspend
<6>[  609.853772] btuart_pin_mux: off
<4>[  609.859441] max8903b_suspend: suspend
<6>[  609.861463] PM: suspend of devices complete after 45.338 msecs
<6>[  609.862640] PM: late suspend of devices complete after 1.146 msecs
<4>[  609.862658] Disabling non-boot CPUs ...
<6>[  609.864083] cpufreq: cpu 1 is not active.
<4>[  609.987409] gic_show_resume_irq: 52 triggered
<4>[  609.987409] gic_show_resume_irq: 133 triggeredEnabling non-boot CPUs ...
<4>[  610.082061] CPU1 is up
<6>[  610.082457] PM: early resume of devices complete after 0.373 msecs
<6>[  610.082624] mmc1: msmsdcc_irq: SDIO async irq received
<6>[  610.083077] wakeup wake lock: mmc1
<3>[  610.091598] lsm303dlh_mag_sysfs 0-001e: read transfer error
<3>[  610.091615] lsm303dlh_mag_sysfs 0-001e: get_magnetometer_data failed
<4>[  610.149041] mmc1: queuing unknown CIS tuple 0x01 (3 bytes)
<4>[  610.149685] mmc1: queuing unknown CIS tuple 0x1a (5 bytes)
<4>[  610.149973] mmc1: queuing unknown CIS tuple 0x1b (8 bytes)
<4>[  610.150043] mmc1: queuing unknown CIS tuple 0x14 (0 bytes)
<4>[  610.150351] max8903b_resume: resume
<3>[  610.193730] pm_op(): platform_pm_resume+0x0/0x4c returns -22
<3>[  610.193749] PM: Device kgsl-2d1.1 failed to resume: error -22
<6>[  610.193803] btuart_pin_mux: on
<6>[  610.193822] btuart_deassert_rts: 0(get)
<6>[  610.193835] btuart_deassert_rts: 0(get)
<6>[  610.193848] btuart_deassert_rts: 0(get)
<3>[  610.197788] msm_wm8958_setup_power: codec power setup
<3>[  610.197829] wm8994_ldo_power: Power up the WM8994 LDOs
<7>[  610.247292] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[  610.248003] lm8502_mod_brightness: set LED2 brightness (0) percent
<6>[  610.252529] PM: resume of devices complete after 167.886 msecs
<7>[  610.454734] lm8502_mod_brightness: set LED1 brightness (0) percent
<4>[  610.454788] Restarting tasks ... 
<7>[  610.455256] lm8502_mod_brightness: set LED2 brightness (0) percent
<4>[  610.461054] done.
<6>[  610.461215] suspend: exit suspend, ret = 0 (2014-02-27 23:00:25.709427110 UTC)
<3>[  610.596310] wm8994-codec wm8994-codec: - MEOW wm8994_resume
<6>[  610.737770] PM: Syncing filesystems ... skipped for target platform ... done.
<4>[  610.746254] Freezing user space processes ... (elapsed 0.01 seconds) done.
<4>[  610.765847] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
<4>[  610.785752] Suspending console(s) (use no_console_suspend to debug)
<3>[  610.802784] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
<3>[  610.802795] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
<3>[  610.802804] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
<3>[  610.810889] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
<3>[  610.810898] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
<3>[  610.810907] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
<7>[  610.811433] lm8502_mod_brightness: set LED2 brightness (0) percent
<7>[  610.811784] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[  610.816367] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[  610.817265] lm8502_mod_brightness: set LED2 brightness (0) percent
<3>[  610.821684] msm_wm8958_shutdown_power: codec power shutdown
<3>[  610.821719] wm8994_ldo_power: Power down the WM8994 LDOs
<3>[  610.821762] wm8994 4-001a: - MEOW wm8994_device_suspend
<6>[  610.824344] btuart_pin_mux: off
<4>[  610.830351] max8903b_suspend: suspend
<6>[  610.832991] PM: suspend of devices complete after 36.830 msecs
<6>[  610.834546] PM: late suspend of devices complete after 1.518 msecs
<4>[  610.834572] Disabling non-boot CPUs ...
<6>[  610.844073] cpufreq: cpu 1 is not active.
<6>[  610.861578] cpufreq: cpu 1 is not active.
<4>[  610.920978] gic_show_resume_irq: 48 triggered
<4>[  610.920978] gic_show_resume_irq: 52 triggered
<4>[  610.920978] msm_gpio_show_resume_irq: irq 293/gpio 37 triggered wake
<4>[  610.921163] Enabling non-boot CPUs ...
<3>[  610.991628] lsm303dlh_mag_sysfs 0-001e: read transfer error
<3>[  610.991657] lsm303dlh_mag_sysfs 0-001e: get_magnetometer_data failed
<4>[  611.032352] CPU1 is up
<6>[  611.032851] PM: early resume of devices complete after 0.466 msecs
<6>[  611.098952] wakeup wake lock: mmc_delayed_work
<4>[  611.099626] mmc1: queuing unknown CIS tuple 0x01 (3 bytes)
<4>[  611.100626] mmc1: queuing unknown CIS tuple 0x1a (5 bytes)
<4>[  611.101073] mmc1: queuing unknown CIS tuple 0x1b (8 bytes)
<4>[  611.101184] mmc1: queuing unknown CIS tuple 0x14 (0 bytes)
<4>[  611.101733] max8903b_resume: resume
<3>[  611.143997] pm_op(): platform_pm_resume+0x0/0x4c returns -22
<3>[  611.144030] PM: Device kgsl-2d1.1 failed to resume: error -22
<6>[  611.144114] btuart_pin_mux: on
<6>[  611.144144] btuart_deassert_rts: 0(get)
<6>[  611.144165] btuart_deassert_rts: 0(get)
<6>[  611.144187] btuart_deassert_rts: 0(get)
<3>[  611.148948] msm_wm8958_setup_power: codec power setup
<3>[  611.149008] wm8994_ldo_power: Power up the WM8994 LDOs
<7>[  611.199523] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[  611.200312] lm8502_mod_brightness: set LED2 brightness (0) percent
<6>[  611.208012] PM: resume of devices complete after 174.775 msecs
<7>[  611.411586] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[  611.417009] lm8502_mod_brightness: set LED2 brightness (0) percent
<4>[  611.417080] Restarting tasks ... done.
<3>[  611.572284] wm8994-codec wm8994-codec: - MEOW wm8994_resume
<6>[  611.673743] suspend: exit suspend, ret = 0 (2014-02-27 23:00:40.967152740 UTC)
<6>[  611.708805] PM: Syncing filesystems ... skipped for target platform ... done.
<4>[  611.717228] Freezing user space processes ... (elapsed 0.01 seconds) done.
<4>[  611.735849] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
<4>[  611.755758] Suspending console(s) (use no_console_suspend to debug)
<3>[  611.776761] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
<3>[  611.776772] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
<3>[  611.776781] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
<3>[  611.784853] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
<3>[  611.784863] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
<3>[  611.784872] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
<7>[  611.785398] lm8502_mod_brightness: set LED2 brightness (0) percent
<7>[  611.785748] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[  611.790250] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[  611.791167] lm8502_mod_brightness: set LED2 brightness (0) percent
<3>[  611.795573] msm_wm8958_shutdown_power: codec power shutdown
<3>[  611.795608] wm8994_ldo_power: Power down the WM8994 LDOs
<3>[  611.795651] wm8994 4-001a: - MEOW wm8994_device_suspend
<6>[  611.798215] btuart_pin_mux: off
<4>[  611.804374] max8903b_suspend: suspend
<6>[  611.806907] PM: suspend of devices complete after 40.732 msecs
<6>[  611.808430] PM: late suspend of devices complete after 1.486 msecs
<4>[  611.808456] Disabling non-boot CPUs ...
<6>[  611.814086] cpufreq: cpu 1 is not active.
<6>[  611.824080] cpufreq: cpu 1 is not active.
<4>[  611.879330] gic_show_resume_irq: 52 triggered
<4>[  611.879330] gic_show_resume_irq: 133 triggeredEnabling non-boot CPUs ...
<4>[  611.972404] CPU1 is up
<6>[  611.972905] PM: early resume of devices complete after 0.467 msecs
<6>[  611.973130] mmc1: msmsdcc_irq: SDIO async irq received
<6>[  611.973643] wakeup wake lock: mmc1
<4>[  612.039469] mmc1: queuing unknown CIS tuple 0x01 (3 bytes)
<4>[  612.040473] mmc1: queuing unknown CIS tuple 0x1a (5 bytes)
<4>[  612.040922] mmc1: queuing unknown CIS tuple 0x1b (8 bytes)
<4>[  612.041034] mmc1: queuing unknown CIS tuple 0x14 (0 bytes)
<4>[  612.041499] max8903b_resume: resume
<3>[  612.083995] pm_op(): platform_pm_resume+0x0/0x4c returns -22
<3>[  612.084027] PM: Device kgsl-2d1.1 failed to resume: error -22
<6>[  612.084112] btuart_pin_mux: on
<6>[  612.084142] btuart_deassert_rts: 0(get)
<6>[  612.084163] btuart_deassert_rts: 0(get)
<6>[  612.084185] btuart_deassert_rts: 0(get)
<3>[  612.088786] msm_wm8958_setup_power: codec power setup
<3>[  612.088846] wm8994_ldo_power: Power up the WM8994 LDOs
<7>[  612.139929] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[  612.140728] lm8502_mod_brightness: set LED2 brightness (0) percent
<6>[  612.148061] PM: resume of devices complete after 172.535 msecs
<7>[  612.338880] lm8502_mod_brightness: set LED1 brightness (0) percent
<4>[  612.338946] Restarting tasks ... 
<7>[  612.339525] lm8502_mod_brightness: set LED2 brightness (0) percent
<4>[  612.354122] done.
<3>[  612.492272] wm8994-codec wm8994-codec: - MEOW wm8994_resume
<6>[  612.604917] suspend: exit suspend, ret = 0 (2014-02-27 23:00:53.957997186 UTC)
<6>[  612.640622] PM: Syncing filesystems ... skipped for target platform ... done.
<4>[  612.647338] Freezing user space processes ... (elapsed 0.01 seconds) done.
<4>[  612.665854] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
<4>[  612.685782] Suspending console(s) (use no_console_suspend to debug)
<3>[  612.702589] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
<3>[  612.702600] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
<3>[  612.702610] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
<3>[  612.710613] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
<3>[  612.710622] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
<3>[  612.710631] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
<7>[  612.711132] lm8502_mod_brightness: set LED2 brightness (0) percent
<7>[  612.711456] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[  612.716044] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[  612.716836] lm8502_mod_brightness: set LED2 brightness (0) percent
<3>[  612.720925] msm_wm8958_shutdown_power: codec power shutdown
<3>[  612.720940] wm8994_ldo_power: Power down the WM8994 LDOs
<3>[  612.720962] wm8994 4-001a: - MEOW wm8994_device_suspend
<6>[  612.722320] btuart_pin_mux: off
<4>[  612.727280] max8903b_suspend: suspend
<6>[  612.729082] PM: suspend of devices complete after 32.917 msecs
<6>[  612.729944] PM: late suspend of devices complete after 0.845 msecs
<4>[  612.729956] Disabling non-boot CPUs ...
<6>[  612.734090] cpufreq: cpu 1 is not active.
<4>[  612.844166] gic_show_resume_irq: 52 triggered
<4>[  612.844166] gic_show_resume_irq: 133 triggeredEnabling non-boot CPUs ...
<4>[  612.941939] CPU1 is up
<6>[  612.942293] PM: early resume of devices complete after 0.338 msecs
<6>[  612.942434] mmc1: msmsdcc_irq: SDIO async irq received
<6>[  612.942889] wakeup wake lock: mmc1
<3>[  612.951597] lsm303dlh_mag_sysfs 0-001e: read transfer error
<3>[  612.951608] lsm303dlh_mag_sysfs 0-001e: get_magnetometer_data failed
<4>[  613.008782] mmc1: queuing unknown CIS tuple 0x01 (3 bytes)
<4>[  613.009257] mmc1: queuing unknown CIS tuple 0x1a (5 bytes)
<4>[  613.009468] mmc1: queuing unknown CIS tuple 0x1b (8 bytes)
<4>[  613.009519] mmc1: queuing unknown CIS tuple 0x14 (0 bytes)
<4>[  613.009753] max8903b_resume: resume
<3>[  613.043406] pm_op(): platform_pm_resume+0x0/0x4c returns -22
<3>[  613.043418] PM: Device kgsl-2d1.1 failed to resume: error -22
<6>[  613.043457] btuart_pin_mux: on
<6>[  613.043470] btuart_deassert_rts: 0(get)
<6>[  613.043478] btuart_deassert_rts: 0(get)
<6>[  613.043487] btuart_deassert_rts: 0(get)
<3>[  613.047087] msm_wm8958_setup_power: codec power setup
<3>[  613.047117] wm8994_ldo_power: Power up the WM8994 LDOs
<7>[  613.095718] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[  613.096384] lm8502_mod_brightness: set LED2 brightness (0) percent
<6>[  613.099505] PM: resume of devices complete after 155.891 msecs
<7>[  613.227564] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[  613.227905] lm8502_mod_brightness: set LED2 brightness (0) percent
<4>[  613.299935] Restarting tasks ... done.
<6>[  613.311165] suspend: exit suspend, ret = 0 (2014-02-27 23:00:55.712203260 UTC)
<3>[  613.352079] wm8994-codec wm8994-codec: - MEOW wm8994_resume
<6>[  613.403892] PM: Syncing filesystems ... skipped for target platform ... done.
<4>[  613.410941] Freezing user space processes ... (elapsed 0.03 seconds) done.
<4>[  613.446069] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
<4>[  613.463498] Suspending console(s) (use no_console_suspend to debug)
<3>[  613.491693] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
<3>[  613.491720] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
<3>[  613.491745] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
<3>[  613.513960] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
<3>[  613.513985] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
<3>[  613.514008] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
<7>[  613.514833] lm8502_mod_brightness: set LED2 brightness (0) percent
<7>[  613.515221] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[  613.527390] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[  613.528358] lm8502_mod_brightness: set LED2 brightness (0) percent
<3>[  613.532857] msm_wm8958_shutdown_power: codec power shutdown
<3>[  613.532891] wm8994_ldo_power: Power down the WM8994 LDOs
<3>[  613.532937] wm8994 4-001a: - MEOW wm8994_device_suspend
<6>[  613.535711] btuart_pin_mux: off
<4>[  613.540146] max8903b_suspend: suspend
<6>[  613.543469] PM: suspend of devices complete after 63.623 msecs
<6>[  613.545226] PM: late suspend of devices complete after 1.720 msecs
<4>[  613.545252] Disabling non-boot CPUs ...
<4>[  613.616328] gic_show_resume_irq: 52 triggered
<4>[  613.616328] gic_show_resume_irq: 133 triggeredEnabling non-boot CPUs ...
<3>[  613.661644] lsm303dlh_mag_sysfs 0-001e: read transfer error
<3>[  613.661672] lsm303dlh_mag_sysfs 0-001e: get_magnetometer_data failed
<4>[  613.712475] CPU1 is up
<6>[  613.713052] PM: early resume of devices complete after 0.541 msecs
<6>[  613.713302] mmc1: msmsdcc_irq: SDIO async irq received
<6>[  613.714426] wakeup wake lock: mmc1
<4>[  613.789690] mmc1: queuing unknown CIS tuple 0x01 (3 bytes)
<4>[  613.790739] mmc1: queuing unknown CIS tuple 0x1a (5 bytes)
<4>[  613.791209] mmc1: queuing unknown CIS tuple 0x1b (8 bytes)
<4>[  613.791325] mmc1: queuing unknown CIS tuple 0x14 (0 bytes)
<4>[  613.791915] max8903b_resume: resume
<3>[  613.835192] pm_op(): platform_pm_resume+0x0/0x4c returns -22
<3>[  613.835223] PM: Device kgsl-2d1.1 failed to resume: error -22
<6>[  613.835313] btuart_pin_mux: on
<6>[  613.835343] btuart_deassert_rts: 0(get)
<6>[  613.835363] btuart_deassert_rts: 0(get)
<6>[  613.835385] btuart_deassert_rts: 0(get)
<3>[  613.840328] msm_wm8958_setup_power: codec power setup
<3>[  613.840399] wm8994_ldo_power: Power up the WM8994 LDOs
<7>[  613.891412] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[  613.892224] lm8502_mod_brightness: set LED2 brightness (0) percent
<6>[  613.900204] PM: resume of devices complete after 183.683 msecs
<7>[  614.036945] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[  614.037351] lm8502_mod_brightness: set LED2 brightness (0) percent
<4>[  614.095677] Restarting tasks ... done.
<6>[  614.116363] suspend: exit suspend, ret = 0 (2014-02-27 23:00:57.717420594 UTC)
<3>[  614.192233] wm8994-codec wm8994-codec: - MEOW wm8994_resume
<6>[  614.323605] PM: Syncing filesystems ... skipped for target platform ... done.
<4>[  614.330061] Freezing user space processes ... (elapsed 0.02 seconds) done.
<4>[  614.356066] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
<4>[  614.375945] Suspending console(s) (use no_console_suspend to debug)
<3>[  614.409265] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
<3>[  614.409295] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
<3>[  614.409322] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
<3>[  614.434529] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
<3>[  614.434557] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
<3>[  614.434582] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
<7>[  614.435471] lm8502_mod_brightness: set LED2 brightness (0) percent
<7>[  614.435876] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[  614.449038] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[  614.450096] lm8502_mod_brightness: set LED2 brightness (0) percent
<3>[  614.454602] msm_wm8958_shutdown_power: codec power shutdown
<3>[  614.454637] wm8994_ldo_power: Power down the WM8994 LDOs
<3>[  614.454683] wm8994 4-001a: - MEOW wm8994_device_suspend
<6>[  614.457451] btuart_pin_mux: off
<4>[  614.464615] max8903b_suspend: suspend
<6>[  614.467826] PM: suspend of devices complete after 74.524 msecs
<6>[  614.469576] PM: late suspend of devices complete after 1.712 msecs
<4>[  614.469602] Disabling non-boot CPUs ...
<4>[  614.536457] gic_show_resume_irq: 52 triggered
<4>[  614.536457] gic_show_resume_irq: 133 triggeredEnabling non-boot CPUs ...
<3>[  614.571672] lsm303dlh_mag_sysfs 0-001e: read transfer error
<3>[  614.571700] lsm303dlh_mag_sysfs 0-001e: get_magnetometer_data failed
<4>[  614.632470] CPU1 is up
<6>[  614.633045] PM: early resume of devices complete after 0.541 msecs
<6>[  614.633296] mmc1: msmsdcc_irq: SDIO async irq received
<6>[  614.634447] wakeup wake lock: mmc1
<4>[  614.709689] mmc1: queuing unknown CIS tuple 0x01 (3 bytes)
<4>[  614.710739] mmc1: queuing unknown CIS tuple 0x1a (5 bytes)
<4>[  614.711207] mmc1: queuing unknown CIS tuple 0x1b (8 bytes)
<4>[  614.711322] mmc1: queuing unknown CIS tuple 0x14 (0 bytes)
<4>[  614.711915] max8903b_resume: resume
<3>[  614.755197] pm_op(): platform_pm_resume+0x0/0x4c returns -22
<3>[  614.755229] PM: Device kgsl-2d1.1 failed to resume: error -22
<6>[  614.755319] btuart_pin_mux: on
<6>[  614.755349] btuart_deassert_rts: 0(get)
<6>[  614.755369] btuart_deassert_rts: 0(get)
<6>[  614.755391] btuart_deassert_rts: 0(get)
<3>[  614.760338] msm_wm8958_setup_power: codec power setup
<3>[  614.760403] wm8994_ldo_power: Power up the WM8994 LDOs
<7>[  614.811440] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[  614.812255] lm8502_mod_brightness: set LED2 brightness (0) percent
<6>[  614.820221] PM: resume of devices complete after 183.692 msecs
<7>[  614.956966] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[  614.957374] lm8502_mod_brightness: set LED2 brightness (0) percent
<4>[  615.015708] Restarting tasks ... done.
<6>[  615.036409] suspend: exit suspend, ret = 0 (2014-02-27 23:00:58.637461037 UTC)
<3>[  615.102267] wm8994-codec wm8994-codec: - MEOW wm8994_resume
<6>[  615.232857] PM: Syncing filesystems ... skipped for target platform ... done.
<4>[  615.241326] Freezing user space processes ... (elapsed 0.02 seconds) done.
<4>[  615.265869] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
<4>[  615.285783] Suspending console(s) (use no_console_suspend to debug)
<3>[  615.304586] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
<3>[  615.304597] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
<3>[  615.304607] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
<3>[  615.312611] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
<3>[  615.312620] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
<3>[  615.312629] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
<7>[  615.313164] lm8502_mod_brightness: set LED2 brightness (0) percent
<7>[  615.313514] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[  615.318081] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[  615.318962] lm8502_mod_brightness: set LED2 brightness (0) percent
<3>[  615.323294] msm_wm8958_shutdown_power: codec power shutdown
<3>[  615.323326] wm8994_ldo_power: Power down the WM8994 LDOs
<3>[  615.323365] wm8994 4-001a: - MEOW wm8994_device_suspend
<6>[  615.325722] btuart_pin_mux: off
<4>[  615.331729] max8903b_suspend: suspend
<6>[  615.334150] PM: suspend of devices complete after 37.965 msecs
<6>[  615.335586] PM: late suspend of devices complete after 1.403 msecs
<4>[  615.335611] Disabling non-boot CPUs ...
<4>[  615.458769] gic_show_resume_irq: 52 triggered
<4>[  615.458769] gic_show_resume_irq: 133 triggeredEnabling non-boot CPUs ...
<3>[  615.481649] lsm303dlh_mag_sysfs 0-001e: read transfer error
<3>[  615.481675] lsm303dlh_mag_sysfs 0-001e: get_magnetometer_data failed
<4>[  615.612352] CPU1 is up
<6>[  615.612829] PM: early resume of devices complete after 0.446 msecs
<6>[  615.613035] mmc1: msmsdcc_irq: SDIO async irq received
<6>[  615.613527] wakeup wake lock: mmc1
<4>[  615.679310] mmc1: queuing unknown CIS tuple 0x01 (3 bytes)
<4>[  615.680228] mmc1: queuing unknown CIS tuple 0x1a (5 bytes)
<4>[  615.680638] mmc1: queuing unknown CIS tuple 0x1b (8 bytes)
<4>[  615.680740] mmc1: queuing unknown CIS tuple 0x14 (0 bytes)
<4>[  615.681158] max8903b_resume: resume
<3>[  615.723969] pm_op(): platform_pm_resume+0x0/0x4c returns -22
<3>[  615.723999] PM: Device kgsl-2d1.1 failed to resume: error -22
<6>[  615.724076] btuart_pin_mux: on
<6>[  615.724104] btuart_deassert_rts: 0(get)
<6>[  615.724123] btuart_deassert_rts: 0(get)
<6>[  615.724143] btuart_deassert_rts: 0(get)
<3>[  615.728721] msm_wm8958_setup_power: codec power setup
<3>[  615.728777] wm8994_ldo_power: Power up the WM8994 LDOs
<7>[  615.779020] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[  615.779777] lm8502_mod_brightness: set LED2 brightness (0) percent
<6>[  615.786463] PM: resume of devices complete after 170.534 msecs
<4>[  615.980959] Restarting tasks ... 
<7>[  615.981515] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[  615.992386] lm8502_mod_brightness: set LED2 brightness (0) percent
<4>[  615.997037] done.
<3>[  616.132304] wm8994-codec wm8994-codec: - MEOW wm8994_resume
<6>[  616.236096] suspend: exit suspend, ret = 0 (2014-02-27 23:01:02.950693036 UTC)
<6>[  616.271495] PM: Syncing filesystems ... skipped for target platform ... done.
<4>[  616.279986] Freezing user space processes ... (elapsed 0.02 seconds) done.
<4>[  616.305876] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
<4>[  616.325790] Suspending console(s) (use no_console_suspend to debug)
<3>[  616.344737] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
<3>[  616.344749] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
<3>[  616.344758] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
<3>[  616.352764] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
<3>[  616.352773] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
<3>[  616.352782] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
<7>[  616.353311] lm8502_mod_brightness: set LED2 brightness (0) percent
<7>[  616.353663] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[  616.358252] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[  616.359168] lm8502_mod_brightness: set LED2 brightness (0) percent
<3>[  616.363651] msm_wm8958_shutdown_power: codec power shutdown
<3>[  616.363686] wm8994_ldo_power: Power down the WM8994 LDOs
<3>[  616.363729] wm8994 4-001a: - MEOW wm8994_device_suspend
<6>[  616.366312] btuart_pin_mux: off
<4>[  616.372421] max8903b_suspend: suspend
<6>[  616.374970] PM: suspend of devices complete after 38.824 msecs
<6>[  616.376522] PM: late suspend of devices complete after 1.515 msecs
<4>[  616.376549] Disabling non-boot CPUs ...
<6>[  616.384108] cpufreq: cpu 1 is not active.
<6>[  616.394106] cpufreq: cpu 1 is not active.
<4>[  616.449393] gic_show_resume_irq: 48 triggered
<4>[  616.449393] gic_show_resume_irq: 52 triggered
<4>[  616.449393] msm_gpio_show_resume_irq: irq 293/gpio 37 triggered wake
<4>[  616.449578] Enabling non-boot CPUs ...
<4>[  616.542431] CPU1 is up
<6>[  616.542930] PM: early resume of devices complete after 0.465 msecs
<3>[  616.591662] lsm303dlh_mag_sysfs 0-001e: read transfer error
<3>[  616.591690] lsm303dlh_mag_sysfs 0-001e: get_magnetometer_data failed
<6>[  616.608922] wakeup wake lock: mmc_delayed_work
<4>[  616.609599] mmc1: queuing unknown CIS tuple 0x01 (3 bytes)
<4>[  616.610600] mmc1: queuing unknown CIS tuple 0x1a (5 bytes)
<4>[  616.611048] mmc1: queuing unknown CIS tuple 0x1b (8 bytes)
<4>[  616.611160] mmc1: queuing unknown CIS tuple 0x14 (0 bytes)
<4>[  616.611716] max8903b_resume: resume
<3>[  616.654034] pm_op(): platform_pm_resume+0x0/0x4c returns -22
<3>[  616.654066] PM: Device kgsl-2d1.1 failed to resume: error -22
<6>[  616.654151] btuart_pin_mux: on
<6>[  616.654181] btuart_deassert_rts: 0(get)
<6>[  616.654203] btuart_deassert_rts: 0(get)
<6>[  616.654225] btuart_deassert_rts: 0(get)
<3>[  616.658986] msm_wm8958_setup_power: codec power setup
<3>[  616.659047] wm8994_ldo_power: Power up the WM8994 LDOs
<7>[  616.710036] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[  616.710825] lm8502_mod_brightness: set LED2 brightness (0) percent
<6>[  616.718460] PM: resume of devices complete after 175.140 msecs
<7>[  616.805594] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[  616.805993] lm8502_mod_brightness: set LED2 brightness (0) percent
<4>[  616.926890] Restarting tasks ... done.
<6>[  616.937777] suspend: exit suspend, ret = 0 (2014-02-27 23:01:17.720762964 UTC)
<3>[  616.942280] wm8994-codec wm8994-codec: - MEOW wm8994_resume
<6>[  617.012615] PM: Syncing filesystems ... skipped for target platform ... done.
<4>[  617.018797] Freezing user space processes ... (elapsed 0.02 seconds) done.
<4>[  617.046027] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
<4>[  617.063478] Suspending console(s) (use no_console_suspend to debug)
<3>[  617.085327] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
<3>[  617.085339] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
<3>[  617.085348] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
<3>[  617.093417] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
<3>[  617.093427] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
<3>[  617.093436] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
<7>[  617.093933] lm8502_mod_brightness: set LED2 brightness (0) percent
<7>[  617.094258] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[  617.098811] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[  617.099605] lm8502_mod_brightness: set LED2 brightness (0) percent
<3>[  617.103720] msm_wm8958_shutdown_power: codec power shutdown
<3>[  617.103735] wm8994_ldo_power: Power down the WM8994 LDOs
<3>[  617.103755] wm8994 4-001a: - MEOW wm8994_device_suspend
<6>[  617.105045] btuart_pin_mux: off
<4>[  617.107711] max8903b_suspend: suspend
<6>[  617.109508] PM: suspend of devices complete after 30.642 msecs
<6>[  617.110367] PM: late suspend of devices complete after 0.842 msecs
<4>[  617.110379] Disabling non-boot CPUs ...
<4>[  617.224077] gic_show_resume_irq: 52 triggered
<4>[  617.224077] gic_show_resume_irq: 133 triggeredEnabling non-boot CPUs ...
<3>[  617.291618] lsm303dlh_mag_sysfs 0-001e: read transfer error
<3>[  617.291631] lsm303dlh_mag_sysfs 0-001e: get_magnetometer_data failed
<4>[  617.321977] CPU1 is up
<6>[  617.322330] PM: early resume of devices complete after 0.338 msecs
<6>[  617.322471] mmc1: msmsdcc_irq: SDIO async irq received
<6>[  617.322932] wakeup wake lock: mmc1
<4>[  617.388888] mmc1: queuing unknown CIS tuple 0x01 (3 bytes)
<4>[  617.389364] mmc1: queuing unknown CIS tuple 0x1a (5 bytes)
<4>[  617.389574] mmc1: queuing unknown CIS tuple 0x1b (8 bytes)
<4>[  617.389624] mmc1: queuing unknown CIS tuple 0x14 (0 bytes)
<4>[  617.389857] max8903b_resume: resume
<3>[  617.423689] pm_op(): platform_pm_resume+0x0/0x4c returns -22
<3>[  617.423701] PM: Device kgsl-2d1.1 failed to resume: error -22
<6>[  617.423741] btuart_pin_mux: on
<6>[  617.423754] btuart_deassert_rts: 0(get)
<6>[  617.423762] btuart_deassert_rts: 0(get)
<6>[  617.423771] btuart_deassert_rts: 0(get)
<3>[  617.427372] msm_wm8958_setup_power: codec power setup
<3>[  617.427402] wm8994_ldo_power: Power up the WM8994 LDOs
<7>[  617.475998] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[  617.476664] lm8502_mod_brightness: set LED2 brightness (0) percent
<6>[  617.479752] PM: resume of devices complete after 156.063 msecs
<7>[  617.610218] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[  617.610559] lm8502_mod_brightness: set LED2 brightness (0) percent
<4>[  617.669502] Restarting tasks ... done.
<6>[  617.689589] suspend: exit suspend, ret = 0 (2014-02-27 23:01:25.710371408 UTC)
<3>[  617.752319] wm8994-codec wm8994-codec: - MEOW wm8994_resume
<6>[  617.813217] PM: Syncing filesystems ... skipped for target platform ... done.
<4>[  617.819599] Freezing user space processes ... (elapsed 0.02 seconds) done.
<4>[  617.845990] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
<4>[  617.865904] Suspending console(s) (use no_console_suspend to debug)
<3>[  617.887659] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
<3>[  617.887670] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
<3>[  617.887680] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
<3>[  617.895768] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
<3>[  617.895777] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
<3>[  617.895786] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
<7>[  617.896282] lm8502_mod_brightness: set LED2 brightness (0) percent
<7>[  617.896605] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[  617.901136] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[  617.901941] lm8502_mod_brightness: set LED2 brightness (0) percent
<3>[  617.906031] msm_wm8958_shutdown_power: codec power shutdown
<3>[  617.906046] wm8994_ldo_power: Power down the WM8994 LDOs
<3>[  617.906065] wm8994 4-001a: - MEOW wm8994_device_suspend
<6>[  617.907347] btuart_pin_mux: off
<4>[  617.910015] max8903b_suspend: suspend
<6>[  617.911863] PM: suspend of devices complete after 30.724 msecs
<6>[  617.912722] PM: late suspend of devices complete after 0.842 msecs
<4>[  617.912734] Disabling non-boot CPUs ...
<4>[  617.984030] gic_show_resume_irq: 52 triggered
<4>[  617.984030] gic_show_resume_irq: 133 triggeredEnabling non-boot CPUs ...
<3>[  618.021747] lsm303dlh_mag_sysfs 0-001e: read transfer error
<3>[  618.021760] lsm303dlh_mag_sysfs 0-001e: get_magnetometer_data failed
<4>[  618.081973] CPU1 is up
<6>[  618.082326] PM: early resume of devices complete after 0.337 msecs
<6>[  618.082465] mmc1: msmsdcc_irq: SDIO async irq received
<6>[  618.082912] wakeup wake lock: mmc1
<4>[  618.148903] mmc1: queuing unknown CIS tuple 0x01 (3 bytes)
<4>[  618.149378] mmc1: queuing unknown CIS tuple 0x1a (5 bytes)
<4>[  618.149589] mmc1: queuing unknown CIS tuple 0x1b (8 bytes)
<4>[  618.149640] mmc1: queuing unknown CIS tuple 0x14 (0 bytes)
<4>[  618.149872] max8903b_resume: resume
<3>[  618.183451] pm_op(): platform_pm_resume+0x0/0x4c returns -22
<3>[  618.183463] PM: Device kgsl-2d1.1 failed to resume: error -22
<6>[  618.183502] btuart_pin_mux: on
<6>[  618.183516] btuart_deassert_rts: 0(get)
<6>[  618.183524] btuart_deassert_rts: 0(get)
<6>[  618.183533] btuart_deassert_rts: 0(get)
<3>[  618.187133] msm_wm8958_setup_power: codec power setup
<3>[  618.187164] wm8994_ldo_power: Power up the WM8994 LDOs
<7>[  618.235782] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[  618.236450] lm8502_mod_brightness: set LED2 brightness (0) percent
<6>[  618.239534] PM: resume of devices complete after 155.658 msecs
<7>[  618.398113] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[  618.398461] lm8502_mod_brightness: set LED2 brightness (0) percent
<4>[  618.429274] Restarting tasks ... done.
<6>[  618.444577] suspend: exit suspend, ret = 0 (2014-02-27 23:01:26.465357630 UTC)
<3>[  618.532825] wm8994-codec wm8994-codec: - MEOW wm8994_resume
<6>[  618.670943] PM: Syncing filesystems ... skipped for target platform ... done.
<4>[  618.679614] Freezing user space processes ... (elapsed 0.02 seconds) done.
<4>[  618.705907] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
<4>[  618.725805] Suspending console(s) (use no_console_suspend to debug)
<3>[  618.744274] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
<3>[  618.744285] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
<3>[  618.744294] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
<3>[  618.752299] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
<3>[  618.752308] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
<3>[  618.752317] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
<7>[  618.752840] lm8502_mod_brightness: set LED2 brightness (0) percent
<7>[  618.753187] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[  618.757757] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[  618.758653] lm8502_mod_brightness: set LED2 brightness (0) percent
<3>[  618.763014] msm_wm8958_shutdown_power: codec power shutdown
<3>[  618.763043] wm8994_ldo_power: Power down the WM8994 LDOs
<3>[  618.763078] wm8994 4-001a: - MEOW wm8994_device_suspend
<6>[  618.765248] btuart_pin_mux: off
<4>[  618.771136] max8903b_suspend: suspend
<6>[  618.773505] PM: suspend of devices complete after 37.285 msecs
<6>[  618.774840] PM: late suspend of devices complete after 1.304 msecs
<4>[  618.774862] Disabling non-boot CPUs ...
<6>[  618.784121] cpufreq: cpu 1 is not active.
<6>[  618.794119] cpufreq: cpu 1 is not active.
<4>[  618.848533] gic_show_resume_irq: 52 triggered
<4>[  618.848533] gic_show_resume_irq: 133 triggeredEnabling non-boot CPUs ...
<3>[  618.921654] lsm303dlh_mag_sysfs 0-001e: read transfer error
<3>[  618.921679] lsm303dlh_mag_sysfs 0-001e: get_magnetometer_data failed
<4>[  618.942296] CPU1 is up
<6>[  618.942751] PM: early resume of devices complete after 0.427 msecs
<6>[  618.942944] mmc1: msmsdcc_irq: SDIO async irq received
<6>[  618.943432] wakeup wake lock: mmc1
<4>[  619.009337] mmc1: queuing unknown CIS tuple 0x01 (3 bytes)
<4>[  619.010174] mmc1: queuing unknown CIS tuple 0x1a (5 bytes)
<4>[  619.010548] mmc1: queuing unknown CIS tuple 0x1b (8 bytes)
<4>[  619.010640] mmc1: queuing unknown CIS tuple 0x14 (0 bytes)
<4>[  619.011022] max8903b_resume: resume
<3>[  619.053948] pm_op(): platform_pm_resume+0x0/0x4c returns -22
<3>[  619.053974] PM: Device kgsl-2d1.1 failed to resume: error -22
<6>[  619.054044] btuart_pin_mux: on
<6>[  619.054069] btuart_deassert_rts: 0(get)
<6>[  619.054086] btuart_deassert_rts: 0(get)
<6>[  619.054104] btuart_deassert_rts: 0(get)
<3>[  619.058546] msm_wm8958_setup_power: codec power setup
<3>[  619.058600] wm8994_ldo_power: Power up the WM8994 LDOs
<7>[  619.108596] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[  619.109337] lm8502_mod_brightness: set LED2 brightness (0) percent
<6>[  619.115335] PM: resume of devices complete after 170.067 msecs
<7>[  619.296478] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[  619.296873] lm8502_mod_brightness: set LED2 brightness (0) percent
<4>[  619.316650] Restarting tasks ... done.
<6>[  619.324254] suspend: exit suspend, ret = 0 (2014-02-27 23:01:27.345043260 UTC)
<3>[  619.432308] wm8994-codec wm8994-codec: - MEOW wm8994_resume
<6>[  619.567031] PM: Syncing filesystems ... skipped for target platform ... done.
<4>[  619.573288] Freezing user space processes ... (elapsed 0.03 seconds) done.
<4>[  619.606006] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
<4>[  619.625938] Suspending console(s) (use no_console_suspend to debug)
<3>[  619.649262] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
<3>[  619.649282] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
<3>[  619.649299] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
<3>[  619.664171] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
<3>[  619.664189] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
<3>[  619.664205] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
<7>[  619.664854] lm8502_mod_brightness: set LED2 brightness (0) percent
<7>[  619.665207] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[  619.673386] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[  619.674246] lm8502_mod_brightness: set LED2 brightness (0) percent
<3>[  619.678488] msm_wm8958_shutdown_power: codec power shutdown
<3>[  619.678512] wm8994_ldo_power: Power down the WM8994 LDOs
<3>[  619.678545] wm8994 4-001a: - MEOW wm8994_device_suspend
<6>[  619.680526] btuart_pin_mux: off
<4>[  619.687405] max8903b_suspend: suspend
<6>[  619.689654] PM: suspend of devices complete after 47.435 msecs
<6>[  619.690940] PM: late suspend of devices complete after 1.260 msecs
<4>[  619.690959] Disabling non-boot CPUs ...
<4>[  619.805340] gic_show_resume_irq: 52 triggered
<4>[  619.805340] gic_show_resume_irq: 133 triggeredEnabling non-boot CPUs ...
<3>[  619.821701] lsm303dlh_mag_sysfs 0-001e: read transfer error
<3>[  619.821722] lsm303dlh_mag_sysfs 0-001e: get_magnetometer_data failed
<4>[  619.902266] CPU1 is up
<6>[  619.902719] PM: early resume of devices complete after 0.428 msecs
<6>[  619.902910] mmc1: msmsdcc_irq: SDIO async irq received
<6>[  619.903377] wakeup wake lock: mmc1
<4>[  619.969273] mmc1: queuing unknown CIS tuple 0x01 (3 bytes)
<4>[  619.970021] mmc1: queuing unknown CIS tuple 0x1a (5 bytes)
<4>[  619.970354] mmc1: queuing unknown CIS tuple 0x1b (8 bytes)
<4>[  619.970435] mmc1: queuing unknown CIS tuple 0x14 (0 bytes)
<4>[  619.970786] max8903b_resume: resume
<3>[  620.015002] pm_op(): platform_pm_resume+0x0/0x4c returns -22
<3>[  620.015024] PM: Device kgsl-2d1.1 failed to resume: error -22
<6>[  620.015087] btuart_pin_mux: on
<6>[  620.015108] btuart_deassert_rts: 0(get)
<6>[  620.015122] btuart_deassert_rts: 0(get)
<6>[  620.015136] btuart_deassert_rts: 0(get)
<3>[  620.019330] msm_wm8958_setup_power: codec power setup
<3>[  620.019376] wm8994_ldo_power: Power up the WM8994 LDOs
<7>[  620.069114] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[  620.069843] lm8502_mod_brightness: set LED2 brightness (0) percent
<6>[  620.075339] PM: resume of devices complete after 169.830 msecs
<4>[  620.268458] Restarting tasks ... 
<7>[  620.269122] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[  620.279387] lm8502_mod_brightness: set LED2 brightness (0) percent
<4>[  620.283451] done.
<6>[  620.283682] suspend: exit suspend, ret = 0 (2014-02-27 23:01:28.304454518 UTC)
<3>[  620.422285] wm8994-codec wm8994-codec: - MEOW wm8994_resume
<6>[  620.557436] PM: Syncing filesystems ... skipped for target platform ... done.
<4>[  620.563731] Freezing user space processes ... (elapsed 0.03 seconds) done.
<4>[  620.596132] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
<4>[  620.615991] Suspending console(s) (use no_console_suspend to debug)
<3>[  620.639972] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
<3>[  620.639992] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
<3>[  620.640008] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
<3>[  620.653932] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
<3>[  620.653949] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
<3>[  620.653964] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
<7>[  620.654600] lm8502_mod_brightness: set LED2 brightness (0) percent
<7>[  620.654953] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[  620.662820] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[  620.663705] lm8502_mod_brightness: set LED2 brightness (0) percent
<3>[  620.668037] msm_wm8958_shutdown_power: codec power shutdown
<3>[  620.668062] wm8994_ldo_power: Power down the WM8994 LDOs
<3>[  620.668094] wm8994 4-001a: - MEOW wm8994_device_suspend
<6>[  620.670044] btuart_pin_mux: off
<4>[  620.678727] max8903b_suspend: suspend
<6>[  620.680954] PM: suspend of devices complete after 48.606 msecs
<6>[  620.682483] PM: late suspend of devices complete after 1.491 msecs
<4>[  620.682503] Disabling non-boot CPUs ...
<4>[  620.754892] gic_show_resume_irq: 48 triggered
<4>[  620.754892] gic_show_resume_irq: 52 triggered
<4>[  620.754892] msm_gpio_show_resume_irq: irq 293/gpio 37 triggered wake
<4>[  620.755010] Enabling non-boot CPUs ...
<4>[  620.852242] CPU1 is up
<6>[  620.852823] PM: early resume of devices complete after 0.554 msecs
<6>[  620.918662] wakeup wake lock: mmc_delayed_work
<4>[  620.919192] mmc1: queuing unknown CIS tuple 0x01 (3 bytes)
<4>[  620.919937] mmc1: queuing unknown CIS tuple 0x1a (5 bytes)
<4>[  620.920268] mmc1: queuing unknown CIS tuple 0x1b (8 bytes)
<4>[  620.920348] mmc1: queuing unknown CIS tuple 0x14 (0 bytes)
<4>[  620.920705] max8903b_resume: resume
<3>[  620.966043] pm_op(): platform_pm_resume+0x0/0x4c returns -22
<3>[  620.966063] PM: Device kgsl-2d1.1 failed to resume: error -22
<6>[  620.966121] btuart_pin_mux: on
<6>[  620.966142] btuart_deassert_rts: 0(get)
<6>[  620.966155] btuart_deassert_rts: 0(get)
<6>[  620.966169] btuart_deassert_rts: 0(get)
<3>[  620.970365] msm_wm8958_setup_power: codec power setup
<3>[  620.970409] wm8994_ldo_power: Power up the WM8994 LDOs
<7>[  621.019825] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[  621.020540] lm8502_mod_brightness: set LED2 brightness (0) percent
<6>[  621.027421] PM: resume of devices complete after 174.271 msecs
<4>[  621.211634] Restarting tasks ... 
<7>[  621.219082] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[  621.219455] lm8502_mod_brightness: set LED2 brightness (0) percent
<4>[  621.224373] done.
<6>[  621.224601] suspend: exit suspend, ret = 0 (2014-02-27 23:01:43.699731111 UTC)
<3>[  621.362342] wm8994-codec wm8994-codec: - MEOW wm8994_resume
<6>[  621.502154] PM: Syncing filesystems ... skipped for target platform ... done.
<4>[  621.510593] Freezing user space processes ... (elapsed 0.02 seconds) done.
<4>[  621.535911] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
<4>[  621.555829] Suspending console(s) (use no_console_suspend to debug)
<3>[  621.574808] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
<3>[  621.574819] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
<3>[  621.574829] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
<3>[  621.582833] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
<3>[  621.582843] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
<3>[  621.582852] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
<7>[  621.583380] lm8502_mod_brightness: set LED2 brightness (0) percent
<7>[  621.583732] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[  621.588297] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[  621.589212] lm8502_mod_brightness: set LED2 brightness (0) percent
<3>[  621.593695] msm_wm8958_shutdown_power: codec power shutdown
<3>[  621.593729] wm8994_ldo_power: Power down the WM8994 LDOs
<3>[  621.593773] wm8994 4-001a: - MEOW wm8994_device_suspend
<6>[  621.596358] btuart_pin_mux: off
<4>[  621.602462] max8903b_suspend: suspend
<6>[  621.605005] PM: suspend of devices complete after 38.793 msecs
<6>[  621.606552] PM: late suspend of devices complete after 1.510 msecs
<4>[  621.606579] Disabling non-boot CPUs ...
<6>[  621.614134] cpufreq: cpu 1 is not active.
<6>[  621.624131] cpufreq: cpu 1 is not active.
<4>[  621.680369] gic_show_resume_irq: 48 triggered
<4>[  621.680369] gic_show_resume_irq: 52 triggered
<4>[  621.680369] msm_gpio_show_resume_irq: irq 293/gpio 37 triggered wake
<4>[  621.680554] Enabling non-boot CPUs ...
<4>[  621.772453] CPU1 is up
<6>[  621.772953] PM: early resume of devices complete after 0.465 msecs
<3>[  621.821689] lsm303dlh_mag_sysfs 0-001e: read transfer error
<3>[  621.821716] lsm303dlh_mag_sysfs 0-001e: get_magnetometer_data failed
<6>[  621.838925] wakeup wake lock: mmc_delayed_work
<4>[  621.839601] mmc1: queuing unknown CIS tuple 0x01 (3 bytes)
<4>[  621.840600] mmc1: queuing unknown CIS tuple 0x1a (5 bytes)
<4>[  621.841046] mmc1: queuing unknown CIS tuple 0x1b (8 bytes)
<4>[  621.841157] mmc1: queuing unknown CIS tuple 0x14 (0 bytes)
<4>[  621.841714] max8903b_resume: resume
<3>[  621.884089] pm_op(): platform_pm_resume+0x0/0x4c returns -22
<3>[  621.884122] PM: Device kgsl-2d1.1 failed to resume: error -22
<6>[  621.884206] btuart_pin_mux: on
<6>[  621.884237] btuart_deassert_rts: 0(get)
<6>[  621.884258] btuart_deassert_rts: 0(get)
<6>[  621.884280] btuart_deassert_rts: 0(get)
<3>[  621.889042] msm_wm8958_setup_power: codec power setup
<3>[  621.889103] wm8994_ldo_power: Power up the WM8994 LDOs
<7>[  621.939944] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[  621.940730] lm8502_mod_brightness: set LED2 brightness (0) percent
<6>[  621.948341] PM: resume of devices complete after 175.002 msecs
<7>[  622.151222] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[  622.156821] lm8502_mod_brightness: set LED2 brightness (0) percent
<4>[  622.156912] Restarting tasks ... done.
<3>[  622.312348] wm8994-codec wm8994-codec: - MEOW wm8994_resume
<6>[  622.419627] suspend: exit suspend, ret = 0 (2014-02-27 23:01:58.972701629 UTC)
<6>[  622.456156] PM: Syncing filesystems ... skipped for target platform ... done.
<4>[  622.462501] Freezing user space processes ... (elapsed 0.02 seconds) done.
<4>[  622.493495] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
<4>[  622.513434] Suspending console(s) (use no_console_suspend to debug)
<3>[  622.539983] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
<3>[  622.540011] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
<3>[  622.540037] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
<3>[  622.565018] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
<3>[  622.565044] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
<3>[  622.565069] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
<7>[  622.565840] lm8502_mod_brightness: set LED2 brightness (0) percent
<7>[  622.566218] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[  622.577403] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[  622.578348] lm8502_mod_brightness: set LED2 brightness (0) percent
<3>[  622.582809] msm_wm8958_shutdown_power: codec power shutdown
<3>[  622.582843] wm8994_ldo_power: Power down the WM8994 LDOs
<3>[  622.582885] wm8994 4-001a: - MEOW wm8994_device_suspend
<6>[  622.585470] btuart_pin_mux: off
<4>[  622.591495] max8903b_suspend: suspend
<6>[  622.594126] PM: suspend of devices complete after 65.460 msecs
<6>[  622.595674] PM: late suspend of devices complete after 1.512 msecs
<4>[  622.595702] Disabling non-boot CPUs ...
<6>[  622.604149] cpufreq: cpu 1 is not active.
<6>[  622.614157] cpufreq: cpu 1 is not active.
<4>[  622.669982] gic_show_resume_irq: 48 triggered
<4>[  622.669982] gic_show_resume_irq: 52 triggered
<4>[  622.669982] msm_gpio_show_resume_irq: irq 293/gpio 37 triggered wake
<4>[  622.670167] Enabling non-boot CPUs ...
<3>[  622.721962] lsm303dlh_mag_sysfs 0-001e: read transfer error
<3>[  622.721991] lsm303dlh_mag_sysfs 0-001e: get_magnetometer_data failed
<4>[  622.762448] CPU1 is up
<6>[  622.762947] PM: early resume of devices complete after 0.466 msecs
<6>[  622.829017] wakeup wake lock: mmc_delayed_work
<4>[  622.829693] mmc1: queuing unknown CIS tuple 0x01 (3 bytes)
<4>[  622.830692] mmc1: queuing unknown CIS tuple 0x1a (5 bytes)
<4>[  622.831139] mmc1: queuing unknown CIS tuple 0x1b (8 bytes)
<4>[  622.831250] mmc1: queuing unknown CIS tuple 0x14 (0 bytes)
<4>[  622.831800] max8903b_resume: resume
<3>[  622.874078] pm_op(): platform_pm_resume+0x0/0x4c returns -22
<3>[  622.874111] PM: Device kgsl-2d1.1 failed to resume: error -22
<6>[  622.874196] btuart_pin_mux: on
<6>[  622.874226] btuart_deassert_rts: 0(get)
<6>[  622.874247] btuart_deassert_rts: 0(get)
<6>[  622.874269] btuart_deassert_rts: 0(get)
<3>[  622.879030] msm_wm8958_setup_power: codec power setup
<3>[  622.879090] wm8994_ldo_power: Power up the WM8994 LDOs
<7>[  622.929580] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[  622.930367] lm8502_mod_brightness: set LED2 brightness (0) percent
<6>[  622.938062] PM: resume of devices complete after 174.725 msecs
<7>[  623.045644] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[  623.046040] lm8502_mod_brightness: set LED2 brightness (0) percent
<4>[  623.146730] Restarting tasks ... done.
<6>[  623.158935] suspend: exit suspend, ret = 0 (2014-02-27 23:02:13.722342223 UTC)
<3>[  623.193985] wm8994-codec wm8994-codec: - MEOW wm8994_resume
<6>[  623.249879] PM: Syncing filesystems ... skipped for target platform ... done.
<4>[  623.258244] Freezing user space processes ... (elapsed 0.01 seconds) done.
<4>[  623.275925] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
<4>[  623.295826] Suspending console(s) (use no_console_suspend to debug)
<3>[  623.313085] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
<3>[  623.313102] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
<3>[  623.313116] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
<3>[  623.325801] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
<3>[  623.325815] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
<3>[  623.325828] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
<7>[  623.326397] lm8502_mod_brightness: set LED2 brightness (0) percent
<7>[  623.326736] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[  623.333137] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[  623.333980] lm8502_mod_brightness: set LED2 brightness (0) percent
<3>[  623.338200] msm_wm8958_shutdown_power: codec power shutdown
<3>[  623.338219] wm8994_ldo_power: Power down the WM8994 LDOs
<3>[  623.338247] wm8994 4-001a: - MEOW wm8994_device_suspend
<6>[  623.339885] btuart_pin_mux: off
<4>[  623.343017] max8903b_suspend: suspend
<6>[  623.344995] PM: suspend of devices complete after 38.802 msecs
<6>[  623.346043] PM: late suspend of devices complete after 1.026 msecs
<4>[  623.346058] Disabling non-boot CPUs ...
<6>[  623.354156] cpufreq: cpu 1 is not active.
<4>[  623.467421] gic_show_resume_irq: 48 triggered
<4>[  623.467421] gic_show_resume_irq: 52 triggered
<4>[  623.467421] msm_gpio_show_resume_irq: irq 296/gpio 40 triggered wake
<4>[  623.467538] Enabling non-boot CPUs ...
<4>[  623.562114] CPU1 is up
<6>[  623.562501] PM: early resume of devices complete after 0.366 msecs
<3>[  623.624148] lsm303dlh_mag_sysfs 0-001e: read transfer error
<3>[  623.624160] lsm303dlh_mag_sysfs 0-001e: get_magnetometer_data failed
<6>[  623.628667] wakeup wake lock: mmc_delayed_work
<4>[  623.629106] mmc1: queuing unknown CIS tuple 0x01 (3 bytes)
<4>[  623.629719] mmc1: queuing unknown CIS tuple 0x1a (5 bytes)
<4>[  623.629992] mmc1: queuing unknown CIS tuple 0x1b (8 bytes)
<4>[  623.630059] mmc1: queuing unknown CIS tuple 0x14 (0 bytes)
<4>[  623.630358] max8903b_resume: resume
<3>[  623.673823] pm_op(): platform_pm_resume+0x0/0x4c returns -22
<3>[  623.673841] PM: Device kgsl-2d1.1 failed to resume: error -22
<6>[  623.673892] btuart_pin_mux: on
<6>[  623.673910] btuart_deassert_rts: 0(get)
<6>[  623.673922] btuart_deassert_rts: 0(get)
<6>[  623.673934] btuart_deassert_rts: 0(get)
<4>[  623.674589] gpio_keys: forcing GPIO 40 to state 1
<6>[  623.674603] gpio-keys: core navi button pressed
<3>[  623.677950] msm_wm8958_setup_power: codec power setup
<3>[  623.677992] wm8994_ldo_power: Power up the WM8994 LDOs
<6>[  623.691634] gpio-keys: core navi button released
<7>[  623.727148] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[  623.727845] lm8502_mod_brightness: set LED2 brightness (0) percent
<6>[  623.732340] PM: resume of devices complete after 169.592 msecs
<7>[  623.940734] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[  623.946747] lm8502_mod_brightness: set LED2 brightness (0) percent
<4>[  623.946804] Restarting tasks ... done.
<6>[  623.959799] lsm303dlh_acc_sysfs: hw init start
<6>[  623.960085] request_suspend_state: wakeup (3->0) at 623948481497 (2014-02-27 23:02:20.728719703 UTC)
<6>[  623.963454] lsm303dlh_acc_sysfs: hw init done
<6>[  624.034211] cfg80211: Calling CRDA for country: TW
<6>[  624.083223] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
<3>[  624.092262] wm8994-codec wm8994-codec: - MEOW wm8994_resume
<6>[  624.173499] suspend: exit suspend, ret = 0 (2014-02-27 23:02:20.942135111 UTC)
<3>[  624.205580] lcdc_lg_panel_power: l10 ENABLE
<3>[  624.803608] board_sdio_wifi_disable
<6>[  624.810116] tenderloin_wifi_power: New regulator mode for 8058_s3: 1
<6>[  624.932891] mmc1: card 0001 removed
<6>[  625.404579] CMTP-ATH6KL v2013-07-23-test
<3>[  625.404605] board_sdio_wifi_enable
<6>[  625.410859] wifi_power(1) 1.8V sdio: set load
<6>[  625.415483] tenderloin_wifi_power: New regulator mode for 8058_s3: 1
<6>[  625.421424] wifi_power(1) 3.3V
<6>[  625.425022] wifi_power(1) 8901_l1 3.3V
<6>[  625.425345] wifi_power(1) 8058_l19 1.8V
<4>[  625.425666] wifi_power(1) CHIP_PWD
<4>[  625.766739] mmc1: queuing unknown CIS tuple 0x01 (3 bytes)
<4>[  625.774344] mmc1: queuing unknown CIS tuple 0x1a (5 bytes)
<4>[  625.778375] mmc1: queuing unknown CIS tuple 0x1b (8 bytes)
<4>[  625.786239] mmc1: queuing unknown CIS tuple 0x14 (0 bytes)
<4>[  625.790585] mmc1: queuing unknown CIS tuple 0x80 (1 bytes)
<4>[  625.796713] mmc1: queuing unknown CIS tuple 0x81 (1 bytes)
<4>[  625.802406] mmc1: queuing unknown CIS tuple 0x82 (1 bytes)
<6>[  625.807846] mmc1: new high speed SDIO card at address 0001
<3>[  625.855623] ath6kl: temporary war to avoid sdio crc error
<6>[  626.310999] ath6kl: ar6003 hw 2.1.1 sdio fw 3.2.0.144
 api 3
<6>[  626.311113] ath6kl: firmware supports: sched-scan,sta-p2pdev-duplex,rsn-cap-override
<6>[  631.521590] msm_device_put:device speaker_stereo_rx set 0
<6>[  631.521710] msm_device_put:device speaker_stereo_rx set 1
<3>[  631.531156] msm_device_put:device freq =48000
<6>[  631.544454] aif1 codec rates are already configured, just return
<6>[  634.812613] msm_device_put:device speaker_stereo_rx set 0
<6>[  635.711336] ADDRCONF(NETDEV_UP): wlan0: link is not ready
<6>[  637.036582] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
<6>[  662.695852] msm_device_put:device speaker_stereo_rx set 0
<6>[  662.695909] msm_device_put:device speaker_stereo_rx set 1
<3>[  662.705290] msm_device_put:device freq =48000
<6>[  662.712794] aif1 codec rates are already configured, just return
<6>[  665.992852] msm_device_put:device speaker_stereo_rx set 0
<4>[  774.811632] ------------[ cut here ]------------
<4>[  774.811677] WARNING: at /home/flintman/source/ever/jelly-bt/kernel/hp/tenderloin/arch/arm/kernel/smp.c:555 resched_cpu+0x4c/0x64()
<4>[  774.826671] Modules linked in: ath6kl cfg80211 compat tun ntfs cifs nls_utf8 [last unloaded: ath6kl]
<4>[  774.835813] [<80049680>] (unwind_backtrace+0x0/0x164) from [<800b49fc>] (warn_slowpath_common+0x4c/0x64)
<4>[  774.845344] [<800b49fc>] (warn_slowpath_common+0x4c/0x64) from [<800b4a2c>] (warn_slowpath_null+0x18/0x1c)
<4>[  774.855153] [<800b4a2c>] (warn_slowpath_null+0x18/0x1c) from [<800aa3b8>] (resched_cpu+0x4c/0x64)
<4>[  774.863747] [<800aa3b8>] (resched_cpu+0x4c/0x64) from [<800b0bcc>] (scheduler_tick+0x1e4/0x2dc)
<4>[  774.872604] [<800b0bcc>] (scheduler_tick+0x1e4/0x2dc) from [<800c04a4>] (update_process_times+0x44/0x50)
<4>[  774.881977] [<800c04a4>] (update_process_times+0x44/0x50) from [<800d76d0>] (tick_sched_timer+0x90/0xd0)
<4>[  774.891438] [<800d76d0>] (tick_sched_timer+0x90/0xd0) from [<800cde58>] (__run_hrtimer.isra.10+0x90/0x118)
<4>[  774.901246] [<800cde58>] (__run_hrtimer.isra.10+0x90/0x118) from [<800ce8ec>] (hrtimer_interrupt+0x134/0x2e0)
<4>[  774.910889] [<800ce8ec>] (hrtimer_interrupt+0x134/0x2e0) from [<80052270>] (msm_timer_interrupt+0x34/0x40)
<4>[  774.920785] [<80052270>] (msm_timer_interrupt+0x34/0x40) from [<800eaae8>] (handle_IRQ_event+0x24/0xc0)
<4>[  774.930069] [<800eaae8>] (handle_IRQ_event+0x24/0xc0) from [<800ecd44>] (handle_percpu_irq+0x4c/0x8c)
<4>[  774.939103] [<800ecd44>] (handle_percpu_irq+0x4c/0x8c) from [<80042088>] (asm_do_IRQ+0x88/0xc8)
<4>[  774.947948] [<80042088>] (asm_do_IRQ+0x88/0xc8) from [<80042dc8>] (__irq_usr+0x48/0xe0)
<4>[  774.955926] Exception stack(0xbdcd7fb0 to 0xbdcd7ff8)
<4>[  774.960790] 7fa0:                                     00000de1 00002800 2af27b1c 2af77b8d
<4>[  774.968952] 7fc0: 00000de1 00002800 000c3eb8 2af27ca4 2af27c18 00000001 2af27c7c 0006f1a8
<4>[  774.977111] 7fe0: 2af8e3d0 2af27b18 2af77ba5 2af77a34 00070030 ffffffff
<4>[  774.983878] ---[ end trace 4ff948f4409302b5 ]---
<6>[ 1027.043279] msm_device_put:device speaker_stereo_rx set 0
<6>[ 1027.043363] msm_device_put:device speaker_stereo_rx set 1
<3>[ 1027.052764] msm_device_put:device freq =48000
<6>[ 1027.065605] aif1 codec rates are already configured, just return
<6>[ 1030.342772] msm_device_put:device speaker_stereo_rx set 0
<6>[ 1035.929169] msm_device_put:device speaker_stereo_rx set 0
<6>[ 1035.929206] msm_device_put:device speaker_stereo_rx set 1
<3>[ 1035.929215] msm_device_put:device freq =48000
<6>[ 1035.955049] aif1 codec rates are already configured, just return
<6>[ 1040.872567] msm_device_put:device speaker_stereo_rx set 0
<6>[ 1042.563255] msm_device_put:device speaker_stereo_rx set 0
<6>[ 1042.563291] msm_device_put:device speaker_stereo_rx set 1
<3>[ 1042.563299] msm_device_put:device freq =48000
<6>[ 1042.589246] aif1 codec rates are already configured, just return
<4>[ 1042.645390] ------------[ cut here ]------------
<4>[ 1042.645435] WARNING: at /home/flintman/source/ever/jelly-bt/kernel/hp/tenderloin/kernel/mutex.c:214 __mutex_lock_slowpath+0x70/0x314()
<4>[ 1042.660779] Modules linked in: ath6kl cfg80211 compat tun ntfs cifs nls_utf8 [last unloaded: ath6kl]
<4>[ 1042.669923] [<80049680>] (unwind_backtrace+0x0/0x164) from [<800b49fc>] (warn_slowpath_common+0x4c/0x64)
<4>[ 1042.679453] [<800b49fc>] (warn_slowpath_common+0x4c/0x64) from [<800b4a2c>] (warn_slowpath_null+0x18/0x1c)
<4>[ 1042.689260] [<800b4a2c>] (warn_slowpath_null+0x18/0x1c) from [<80525c5c>] (__mutex_lock_slowpath+0x70/0x314)
<4>[ 1042.698896] [<80525c5c>] (__mutex_lock_slowpath+0x70/0x314) from [<80525f0c>] (mutex_lock+0xc/0x20)
<4>[ 1042.708017] [<80525f0c>] (mutex_lock+0xc/0x20) from [<8006a68c>] (q6asm_add_hdr+0x70/0x110)
<4>[ 1042.716348] [<8006a68c>] (q6asm_add_hdr+0x70/0x110) from [<8007079c>] (q6asm_cmd_nowait+0x40/0x208)
<4>[ 1042.725380] [<8007079c>] (q6asm_cmd_nowait+0x40/0x208) from [<803f71dc>] (msm_dsp_trigger+0x178/0x240)
<4>[ 1042.734757] [<803f71dc>] (msm_dsp_trigger+0x178/0x240) from [<803e68b0>] (soc_pcm_trigger+0x80/0xa4)
<4>[ 1042.743690] [<803e68b0>] (soc_pcm_trigger+0x80/0xa4) from [<803e016c>] (snd_pcm_do_stop+0x4c/0x54)
<4>[ 1042.752803] [<803e016c>] (snd_pcm_do_stop+0x4c/0x54) from [<803dfdc4>] (snd_pcm_action_single+0x38/0x64)
<4>[ 1042.762092] [<803dfdc4>] (snd_pcm_action_single+0x38/0x64) from [<803e45dc>] (snd_pcm_update_state+0x9c/0xdc)
<4>[ 1042.771902] [<803e45dc>] (snd_pcm_update_state+0x9c/0xdc) from [<803e47f8>] (snd_pcm_update_hw_ptr0+0x1dc/0x1f8)
<4>[ 1042.782144] [<803e47f8>] (snd_pcm_update_hw_ptr0+0x1dc/0x1f8) from [<803e48d4>] (snd_pcm_period_elapsed+0xc0/0xd4)
<4>[ 1042.792647] [<803e48d4>] (snd_pcm_period_elapsed+0xc0/0xd4) from [<803f6584>] (event_handler+0x168/0x720)
<4>[ 1042.801935] [<803f6584>] (event_handler+0x168/0x720) from [<8006aec8>] (q6asm_callback+0x5ac/0x730)
<4>[ 1042.811137] [<8006aec8>] (q6asm_callback+0x5ac/0x730) from [<80066a60>] (apr_cb_func+0x578/0x6b8)
<4>[ 1042.819818] [<80066a60>] (apr_cb_func+0x578/0x6b8) from [<800677f8>] (apr_tal_notify+0x228/0x30c)
<4>[ 1042.828675] [<800677f8>] (apr_tal_notify+0x228/0x30c) from [<800573a4>] (handle_smd_irq+0x140/0x180)
<4>[ 1042.837872] [<800573a4>] (handle_smd_irq+0x140/0x180) from [<80057414>] (smd_dsp_irq_handler+0x10/0x20)
<4>[ 1042.847341] [<80057414>] (smd_dsp_irq_handler+0x10/0x20) from [<800eaae8>] (handle_IRQ_event+0x24/0xc0)
<4>[ 1042.856712] [<800eaae8>] (handle_IRQ_event+0x24/0xc0) from [<800eccac>] (handle_edge_irq+0x13c/0x188)
<4>[ 1042.865747] [<800eccac>] (handle_edge_irq+0x13c/0x188) from [<80042088>] (asm_do_IRQ+0x88/0xc8)
<4>[ 1042.874591] [<80042088>] (asm_do_IRQ+0x88/0xc8) from [<80042b8c>] (__irq_svc+0x4c/0xe4)
<4>[ 1042.882569] Exception stack(0xbdcd7cd8 to 0xbdcd7d20)
<4>[ 1042.887432] 7cc0:                                                       8074b7d4 a0070013
<4>[ 1042.895596] 7ce0: 00000000 00000001 a0070013 00000000 a0070013 bdcd7da0 00000000 bdcd7eb4
<4>[ 1042.903754] 7d00: 00000000 9807ac58 00000000 bdcd7d20 80526f10 80526f14 60070013 ffffffff
<4>[ 1042.911918] [<80042b8c>] (__irq_svc+0x4c/0xe4) from [<80526f14>] (_raw_spin_unlock_irqrestore+0x10/0x3c)
<4>[ 1042.921473] [<80526f14>] (_raw_spin_unlock_irqrestore+0x10/0x3c) from [<8008d368>] (local_clk_enable+0x30/0x3c)
<4>[ 1042.931628] [<8008d368>] (local_clk_enable+0x30/0x3c) from [<80051364>] (clk_enable+0x14/0x18)
<4>[ 1042.940313] [<80051364>] (clk_enable+0x14/0x18) from [<80270a28>] (kgsl_pwrctrl_clk+0x184/0x1a0)
<4>[ 1042.948899] [<80270a28>] (kgsl_pwrctrl_clk+0x184/0x1a0) from [<8027159c>] (kgsl_pwrctrl_wake+0x48/0x108)
<4>[ 1042.958361] [<8027159c>] (kgsl_pwrctrl_wake+0x48/0x108) from [<80277848>] (kgsl_yamato_regwrite+0x14/0x28)
<4>[ 1042.968167] [<80277848>] (kgsl_yamato_regwrite+0x14/0x28) from [<80272e3c>] (kgsl_ringbuffer_submit+0x3c/0x50)
<4>[ 1042.978149] [<80272e3c>] (kgsl_ringbuffer_submit+0x3c/0x50) from [<802731d8>] (kgsl_ringbuffer_addcmds+0x200/0x220)
<4>[ 1042.988480] [<802731d8>] (kgsl_ringbuffer_addcmds+0x200/0x220) from [<80278530>] (kgsl_yamato_setstate+0x144/0x1b0)
<4>[ 1042.998896] [<80278530>] (kgsl_yamato_setstate+0x144/0x1b0) from [<8026dbd4>] (kgsl_setstate+0x1c/0x28)
<4>[ 1043.008272] [<8026dbd4>] (kgsl_setstate+0x1c/0x28) from [<80273f50>] (kgsl_ringbuffer_issueibcmds+0x1a8/0x268)
<4>[ 1043.018342] [<80273f50>] (kgsl_ringbuffer_issueibcmds+0x1a8/0x268) from [<8026e23c>] (kgsl_ioctl_rb_issueibcmds+0x300/0x3d0)
<4>[ 1043.029454] [<8026e23c>] (kgsl_ioctl_rb_issueibcmds+0x300/0x3d0) from [<8026ea40>] (kgsl_ioctl+0x194/0x260)
<4>[ 1043.039179] [<8026ea40>] (kgsl_ioctl+0x194/0x260) from [<8013097c>] (vfs_ioctl+0x2c/0xac)
<4>[ 1043.047161] [<8013097c>] (vfs_ioctl+0x2c/0xac) from [<801313a8>] (do_vfs_ioctl+0x4e8/0x53c)
<4>[ 1043.055667] [<801313a8>] (do_vfs_ioctl+0x4e8/0x53c) from [<8013142c>] (sys_ioctl+0x30/0x58)
<4>[ 1043.063999] [<8013142c>] (sys_ioctl+0x30/0x58) from [<80043080>] (ret_fast_syscall+0x0/0x30)
<4>[ 1043.072327] ---[ end trace 4ff948f4409302b6 ]---
<6>[ 1046.312847] msm_device_put:device speaker_stereo_rx set 0
<6>[ 1051.046972] msm_device_put:device speaker_stereo_rx set 0
<6>[ 1051.047022] msm_device_put:device speaker_stereo_rx set 1
<3>[ 1051.056417] msm_device_put:device freq =48000
<6>[ 1051.069264] aif1 codec rates are already configured, just return
<6>[ 1054.338498] msm_device_put:device speaker_stereo_rx set 0
<6>[ 1055.799048] msm_device_put:device speaker_stereo_rx set 0
<6>[ 1055.799134] msm_device_put:device speaker_stereo_rx set 1
<3>[ 1055.808576] msm_device_put:device freq =48000
<6>[ 1055.821435] aif1 codec rates are already configured, just return
<6>[ 1060.112801] msm_device_put:device speaker_stereo_rx set 0
<6>[ 1063.263374] msm_device_put:device speaker_stereo_rx set 0
<6>[ 1063.263425] msm_device_put:device speaker_stereo_rx set 1
<3>[ 1063.272832] msm_device_put:device freq =48000
<6>[ 1063.285790] aif1 codec rates are already configured, just return
<6>[ 1066.542497] msm_device_put:device speaker_stereo_rx set 0
<6>[ 1069.655056] msm_device_put:device speaker_stereo_rx set 0
<6>[ 1069.655110] msm_device_put:device speaker_stereo_rx set 1
<3>[ 1069.664516] msm_device_put:device freq =48000
<6>[ 1069.677418] aif1 codec rates are already configured, just return
<6>[ 1072.942794] msm_device_put:device speaker_stereo_rx set 0
<6>[ 1088.069297] msm_device_put:device speaker_stereo_rx set 0
<6>[ 1088.069351] msm_device_put:device speaker_stereo_rx set 1
<3>[ 1088.078786] msm_device_put:device freq =48000
<6>[ 1088.091690] aif1 codec rates are already configured, just return
<6>[ 1094.132848] msm_device_put:device speaker_stereo_rx set 0
<6>[ 1134.148734] msm_device_put:device speaker_stereo_rx set 0
<6>[ 1134.148785] msm_device_put:device speaker_stereo_rx set 1
<3>[ 1134.158226] msm_device_put:device freq =48000
<6>[ 1134.171380] aif1 codec rates are already configured, just return
<6>[ 1137.421709] gpio-keys: volume down button pressed
<6>[ 1137.443883] msm_device_put:device speaker_stereo_rx set 0
<6>[ 1138.301683] gpio-keys: volume down button released
<6>[ 1209.835140] msm_device_put:device speaker_stereo_rx set 0
<6>[ 1209.835192] msm_device_put:device speaker_stereo_rx set 1
<3>[ 1209.844627] msm_device_put:device freq =48000
<6>[ 1209.857442] aif1 codec rates are already configured, just return
<6>[ 1216.441726] gpio-keys: volume down button pressed
<6>[ 1217.112618] msm_device_put:device speaker_stereo_rx set 0
<6>[ 1217.501652] gpio-keys: volume down button released
<6>[ 1247.957716] msm_device_put:device speaker_stereo_rx set 0
<6>[ 1247.957770] msm_device_put:device speaker_stereo_rx set 1
<3>[ 1247.967207] msm_device_put:device freq =48000
<6>[ 1247.980495] aif1 codec rates are already configured, just return
<6>[ 1251.242779] msm_device_put:device speaker_stereo_rx set 0
<6>[ 1256.441682] gpio-keys: volume up button pressed
<6>[ 1256.611705] gpio-keys: volume up button released
<6>[ 1257.611705] gpio-keys: volume up button pressed
<6>[ 1258.551690] gpio-keys: volume up button released
<6>[ 1259.381679] gpio-keys: volume up button pressed
<6>[ 1259.531685] gpio-keys: volume up button released
<6>[ 1259.991682] gpio-keys: volume down button pressed
<6>[ 1260.161706] gpio-keys: volume down button released
<6>[ 1260.771678] gpio-keys: volume down button pressed
<6>[ 1260.921698] gpio-keys: volume down button released
<6>[ 1261.205196] gpio-keys: volume down button pressed
<6>[ 1261.411678] gpio-keys: volume down button released
<6>[ 1266.941681] gpio-keys: volume down button pressed
<6>[ 1267.131719] gpio-keys: volume down button released
<6>[ 1272.821684] gpio-keys: volume down button pressed
<6>[ 1273.051639] gpio-keys: volume down button released
<6>[ 1275.304166] gpio-keys: volume down button pressed
<6>[ 1275.461767] gpio-keys: volume down button released
<6>[ 1276.781675] gpio-keys: volume down button pressed
<6>[ 1276.941724] gpio-keys: volume down button released
<6>[ 1278.625181] gpio-keys: volume up button pressed
<6>[ 1278.781674] gpio-keys: volume up button released
<5>[ 1292.214122] msm_timer_set_next_event(12) clock dg_timer, alarm already expired, now 71ca8fb4, alarm 71ca8fbd, late -9
<6>[ 1300.064036] msm_device_put:device speaker_stereo_rx set 0
<6>[ 1300.064091] msm_device_put:device speaker_stereo_rx set 1
<3>[ 1300.064104] msm_device_put:device freq =48000
<6>[ 1300.082485] aif1 codec rates are already configured, just return
<6>[ 1303.041687] gpio-keys: volume down button pressed
<6>[ 1303.711757] gpio-keys: volume down button released
<6>[ 1304.953772] msm_device_put:device speaker_stereo_rx set 0
<6>[ 1561.646873] msm_device_put:device speaker_stereo_rx set 0
<6>[ 1561.646937] msm_device_put:device speaker_stereo_rx set 1
<3>[ 1561.656429] msm_device_put:device freq =48000
<6>[ 1561.675581] aif1 codec rates are already configured, just return
<6>[ 1564.942827] msm_device_put:device speaker_stereo_rx set 0
<6>[ 1616.546781] msm_device_put:device speaker_stereo_rx set 0
<6>[ 1616.546817] msm_device_put:device speaker_stereo_rx set 1
<3>[ 1616.546826] msm_device_put:device freq =48000
<6>[ 1616.575028] aif1 codec rates are already configured, just return
<6>[ 1619.842467] msm_device_put:device speaker_stereo_rx set 0
<6>[ 1620.987429] msm_device_put:device speaker_stereo_rx set 0
<6>[ 1620.987481] msm_device_put:device speaker_stereo_rx set 1
<3>[ 1620.996920] msm_device_put:device freq =48000
<6>[ 1621.009825] aif1 codec rates are already configured, just return
<6>[ 1624.282840] msm_device_put:device speaker_stereo_rx set 0
<6>[ 1709.286696] msm_device_put:device speaker_stereo_rx set 0
<6>[ 1709.286746] msm_device_put:device speaker_stereo_rx set 1
<3>[ 1709.296183] msm_device_put:device freq =48000
<6>[ 1709.309440] aif1 codec rates are already configured, just return
<6>[ 1713.363475] msm_device_put:device speaker_stereo_rx set 0
<6>[ 1716.424784] request_suspend_state: sleep (0->3) at 1716413177138 (2014-02-27 23:20:33.193415344 UTC)
<3>[ 1716.451729] lcdc_lg_panel_power: l10 DISABLE
<6>[ 1716.855065] PM: Syncing filesystems ... skipped for target platform ... done.
<4>[ 1716.861335] Freezing user space processes ... (elapsed 0.02 seconds) done.
<4>[ 1716.883507] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
<4>[ 1716.903408] Suspending console(s) (use no_console_suspend to debug)
<3>[ 1716.925796] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
<3>[ 1716.925825] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
<3>[ 1716.925851] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
<3>[ 1716.950731] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
<3>[ 1716.950757] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
<3>[ 1716.950782] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
<7>[ 1716.951549] lm8502_mod_brightness: set LED2 brightness (0) percent
<7>[ 1716.951929] lm8502_mod_brightness: set LED1 brightness (0) percent
<4>[ 1716.961745] ------------[ cut here ]------------
<4>[ 1716.961915] WARNING: at /home/flintman/source/ever/jelly-bt/external/backports-wireless/drivers/net/wireless/ath/ath6kl/txrx.c:379 ath6kl_data_tx+0x58/0x798 [ath6kl]()
<4>[ 1716.961950] Modules linked in: ath6kl cfg80211 compat tun ntfs cifs nls_utf8 [last unloaded: ath6kl]
<4>[ 1716.962094] [<80049680>] (unwind_backtrace+0x0/0x164) from [<800b49fc>] (warn_slowpath_common+0x4c/0x64)
<4>[ 1716.962146] [<800b49fc>] (warn_slowpath_common+0x4c/0x64) from [<800b4a2c>] (warn_slowpath_null+0x18/0x1c)
<4>[ 1716.962271] [<800b4a2c>] (warn_slowpath_null+0x18/0x1c) from [<7f0df5f0>] (ath6kl_data_tx+0x58/0x798 [ath6kl])
<4>[ 1716.962411] [<7f0df5f0>] (ath6kl_data_tx+0x58/0x798 [ath6kl]) from [<8040f23c>] (dev_hard_start_xmit+0x2a0/0x3ec)
<4>[ 1716.962467] [<8040f23c>] (dev_hard_start_xmit+0x2a0/0x3ec) from [<80420b7c>] (sch_direct_xmit+0x70/0x1f0)
<4>[ 1716.962519] [<80420b7c>] (sch_direct_xmit+0x70/0x1f0) from [<8040f64c>] (dev_queue_xmit+0x2c4/0x4dc)
<4>[ 1716.962570] [<8040f64c>] (dev_queue_xmit+0x2c4/0x4dc) from [<80416628>] (neigh_resolve_output+0x25c/0x2c0)
<4>[ 1716.962631] [<80416628>] (neigh_resolve_output+0x25c/0x2c0) from [<80468848>] (ip_finish_output+0x2b0/0x2fc)
<4>[ 1716.962686] [<80468848>] (ip_finish_output+0x2b0/0x2fc) from [<80468ac0>] (ip_local_out+0x28/0x2c)
<4>[ 1716.962738] [<80468ac0>] (ip_local_out+0x28/0x2c) from [<80468d60>] (ip_queue_xmit+0x29c/0x38c)
<4>[ 1716.962794] [<80468d60>] (ip_queue_xmit+0x29c/0x38c) from [<8047d10c>] (tcp_transmit_skb+0x7c0/0x840)
<4>[ 1716.962845] [<8047d10c>] (tcp_transmit_skb+0x7c0/0x840) from [<8047e4dc>] (tcp_retransmit_skb+0x458/0x5b0)
<4>[ 1716.962898] [<8047e4dc>] (tcp_retransmit_skb+0x458/0x5b0) from [<8047fd88>] (tcp_retransmit_timer+0x400/0x628)
<4>[ 1716.962951] [<8047fd88>] (tcp_retransmit_timer+0x400/0x628) from [<8048004c>] (tcp_write_timer+0x9c/0x1d8)
<4>[ 1716.963006] [<8048004c>] (tcp_write_timer+0x9c/0x1d8) from [<800bf8cc>] (run_timer_softirq+0x180/0x22c)
<4>[ 1716.963064] [<800bf8cc>] (run_timer_softirq+0x180/0x22c) from [<800ba0fc>] (__do_softirq+0xa0/0x13c)
<4>[ 1716.963117] [<800ba0fc>] (__do_softirq+0xa0/0x13c) from [<800ba5c8>] (irq_exit+0x48/0xa4)
<4>[ 1716.963178] [<800ba5c8>] (irq_exit+0x48/0xa4) from [<8004208c>] (asm_do_IRQ+0x8c/0xc8)
<4>[ 1716.963225] [<8004208c>] (asm_do_IRQ+0x8c/0xc8) from [<80042b8c>] (__irq_svc+0x4c/0xe4)
<4>[ 1716.963255] Exception stack(0xbee81df0 to 0xbee81e38)
<4>[ 1716.963287] 1de0:                                     bef36120 bee81e88 00000000 00000001
<4>[ 1716.963329] 1e00: bee80000 bee81e88 00000000 80280d10 00000002 80774698 bef36120 80720080
<4>[ 1716.963368] 1e20: 000003e7 bee81e38 805102c4 8020be18 600f0113 ffffffff
<4>[ 1716.963416] [<80042b8c>] (__irq_svc+0x4c/0xe4) from [<8020be18>] (do_raw_spin_lock+0x74/0x188)
<4>[ 1716.963472] [<8020be18>] (do_raw_spin_lock+0x74/0x188) from [<805102c4>] (klist_next+0x18/0xb4)
<4>[ 1716.963523] [<805102c4>] (klist_next+0x18/0xb4) from [<8028102c>] (device_for_each_child+0x44/0x78)
<4>[ 1716.963574] [<8028102c>] (device_for_each_child+0x44/0x78) from [<80288e60>] (__device_suspend+0x20/0x1cc)
<4>[ 1716.963623] [<80288e60>] (__device_suspend+0x20/0x1cc) from [<80289750>] (dpm_suspend_start+0x388/0x4b4)
<4>[ 1716.963683] [<80289750>] (dpm_suspend_start+0x388/0x4b4) from [<800e20f4>] (suspend_devices_and_enter+0x40/0x1c8)
<4>[ 1716.963740] [<800e20f4>] (suspend_devices_and_enter+0x40/0x1c8) from [<800e23c8>] (enter_state+0x14c/0x228)
<4>[ 1716.963795] [<800e23c8>] (enter_state+0x14c/0x228) from [<800e3758>] (suspend+0x60/0x124)
<4>[ 1716.963845] [<800e3758>] (suspend+0x60/0x124) from [<800c6a34>] (worker_thread+0x154/0x1e4)
<4>[ 1716.963896] [<800c6a34>] (worker_thread+0x154/0x1e4) from [<800ca514>] (kthread+0x7c/0x88)
<4>[ 1716.963944] [<800ca514>] (kthread+0x7c/0x88) from [<800442a0>] (kernel_thread_exit+0x0/0x8)
<4>[ 1716.963974] ---[ end trace 4ff948f4409302b7 ]---
<7>[ 1716.965246] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[ 1716.966187] lm8502_mod_brightness: set LED2 brightness (0) percent
<3>[ 1716.970651] msm_wm8958_shutdown_power: codec power shutdown
<3>[ 1716.970684] wm8994_ldo_power: Power down the WM8994 LDOs
<3>[ 1716.970728] wm8994 4-001a: - MEOW wm8994_device_suspend
<6>[ 1716.973355] btuart_pin_mux: off
<4>[ 1716.979355] max8903b_suspend: suspend
<6>[ 1716.981975] PM: suspend of devices complete after 63.665 msecs
<6>[ 1716.983501] PM: late suspend of devices complete after 1.488 msecs
<4>[ 1716.983526] Disabling non-boot CPUs ...
<6>[ 1716.984199] cpufreq: cpu 1 is not active.
<4>[ 1717.109354] gic_show_resume_irq: 48 triggered
<4>[ 1717.109354] gic_show_resume_irq: 52 triggered
<4>[ 1717.109354] msm_gpio_show_resume_irq: irq 296/gpio 40 triggered wake
<4>[ 1717.109544] Enabling non-boot CPUs ...
<4>[ 1717.202462] CPU1 is up
<6>[ 1717.202966] PM: early resume of devices complete after 0.469 msecs
<3>[ 1717.211713] lsm303dlh_mag_sysfs 0-001e: read transfer error
<3>[ 1717.211740] lsm303dlh_mag_sysfs 0-001e: get_magnetometer_data failed
<6>[ 1717.269001] wakeup wake lock: mmc_delayed_work
<4>[ 1717.269680] mmc1: queuing unknown CIS tuple 0x01 (3 bytes)
<4>[ 1717.270680] mmc1: queuing unknown CIS tuple 0x1a (5 bytes)
<4>[ 1717.271128] mmc1: queuing unknown CIS tuple 0x1b (8 bytes)
<4>[ 1717.271239] mmc1: queuing unknown CIS tuple 0x14 (0 bytes)
<4>[ 1717.271791] max8903b_resume: resume
<3>[ 1717.314093] pm_op(): platform_pm_resume+0x0/0x4c returns -22
<3>[ 1717.314125] PM: Device kgsl-2d1.1 failed to resume: error -22
<6>[ 1717.314207] btuart_pin_mux: on
<6>[ 1717.314238] btuart_deassert_rts: 0(get)
<6>[ 1717.314259] btuart_deassert_rts: 0(get)
<6>[ 1717.314281] btuart_deassert_rts: 0(get)
<4>[ 1717.315323] gpio_keys: forcing GPIO 40 to state 1
<6>[ 1717.315348] gpio-keys: core navi button pressed
<3>[ 1717.319131] msm_wm8958_setup_power: codec power setup
<3>[ 1717.319191] wm8994_ldo_power: Power up the WM8994 LDOs
<6>[ 1717.331660] gpio-keys: core navi button released
<7>[ 1717.370124] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[ 1717.370924] lm8502_mod_brightness: set LED2 brightness (0) percent
<6>[ 1717.377990] PM: resume of devices complete after 174.685 msecs
<7>[ 1717.623429] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[ 1717.631329] lm8502_mod_brightness: set LED2 brightness (0) percent
<4>[ 1717.975839] Restarting tasks ... done.
<3>[ 1718.112430] wm8994-codec wm8994-codec: - MEOW wm8994_resume
<6>[ 1718.223672] suspend: exit suspend, ret = 0 (2014-02-27 23:20:40.347043556 UTC)
<6>[ 1718.257529] lsm303dlh_acc_sysfs: hw init start
<6>[ 1718.258258] request_suspend_state: wakeup (3->0) at 1718246624396 (2014-02-27 23:20:40.381624445 UTC)
<6>[ 1718.276306] lsm303dlh_acc_sysfs: hw init done
<3>[ 1718.306640] lcdc_lg_panel_power: l10 ENABLE
<6>[ 1736.101952] msm_device_put:device speaker_stereo_rx set 0
<6>[ 1736.102002] msm_device_put:device speaker_stereo_rx set 1
<3>[ 1736.111369] msm_device_put:device freq =48000
<6>[ 1736.124605] aif1 codec rates are already configured, just return
<6>[ 1741.102668] msm_device_put:device speaker_stereo_rx set 0
<6>[ 1743.353649] msm_device_put:device speaker_stereo_rx set 0
<6>[ 1743.353685] msm_device_put:device speaker_stereo_rx set 1
<3>[ 1743.353694] msm_device_put:device freq =48000
<6>[ 1743.379428] aif1 codec rates are already configured, just return
<6>[ 1746.642964] msm_device_put:device speaker_stereo_rx set 0
<6>[ 1827.646657] msm_device_put:device speaker_stereo_rx set 0
<6>[ 1827.646708] msm_device_put:device speaker_stereo_rx set 1
<3>[ 1827.656108] msm_device_put:device freq =48000
<6>[ 1827.669055] aif1 codec rates are already configured, just return
<6>[ 1830.932993] msm_device_put:device speaker_stereo_rx set 0
<5>[ 1916.054114] msm_timer_set_next_event(12) clock dg_timer, alarm already expired, now a070f99d, alarm a070f9a6, late -9
<5>[ 1928.774132] msm_timer_set_next_event(12) clock dg_timer, alarm already expired, now a31b027e, alarm a31b0286, late -8
<6>[ 1948.514709] msm_device_put:device speaker_stereo_rx set 0
<6>[ 1948.514745] msm_device_put:device speaker_stereo_rx set 1
<3>[ 1948.514754] msm_device_put:device freq =48000
<6>[ 1948.535611] aif1 codec rates are already configured, just return
<6>[ 1953.212497] msm_device_put:device speaker_stereo_rx set 0
<6>[ 1953.289496] msm_device_put:device speaker_stereo_rx set 0
<6>[ 1953.289548] msm_device_put:device speaker_stereo_rx set 1
<3>[ 1953.289560] msm_device_put:device freq =48000
<6>[ 1953.307940] aif1 codec rates are already configured, just return
<6>[ 1956.572516] msm_device_put:device speaker_stereo_rx set 0
<6>[ 1960.429113] msm_device_put:device speaker_stereo_rx set 0
<6>[ 1960.429150] msm_device_put:device speaker_stereo_rx set 1
<3>[ 1960.429158] msm_device_put:device freq =48000
<6>[ 1960.445493] aif1 codec rates are already configured, just return
<6>[ 1963.723406] msm_device_put:device speaker_stereo_rx set 0
<6>[ 2079.932979] msm_device_put:device speaker_stereo_rx set 0
<6>[ 2079.933032] msm_device_put:device speaker_stereo_rx set 1
<3>[ 2079.942455] msm_device_put:device freq =48000
<6>[ 2079.955344] aif1 codec rates are already configured, just return
<6>[ 2083.222709] msm_device_put:device speaker_stereo_rx set 0
<6>[ 2083.417538] msm_device_put:device speaker_stereo_rx set 0
<6>[ 2083.417589] msm_device_put:device speaker_stereo_rx set 1
<3>[ 2083.427014] msm_device_put:device freq =48000
<6>[ 2083.439860] aif1 codec rates are already configured, just return
<6>[ 2086.696018] msm_device_put:device speaker_stereo_rx set 0
<6>[ 2100.719346] msm_device_put:device speaker_stereo_rx set 0
<6>[ 2100.719399] msm_device_put:device speaker_stereo_rx set 1
<3>[ 2100.728857] msm_device_put:device freq =48000
<6>[ 2100.742303] aif1 codec rates are already configured, just return
<5>[ 2102.534116] msm_timer_set_next_event(12) clock dg_timer, alarm already expired, now bc3f810d, alarm bc3f8116, late -9
<6>[ 2106.323008] msm_device_put:device speaker_stereo_rx set 0
<6>[ 2120.123664] msm_device_put:device speaker_stereo_rx set 0
<6>[ 2120.123717] msm_device_put:device speaker_stereo_rx set 1
<3>[ 2120.133152] msm_device_put:device freq =48000
<6>[ 2120.145968] aif1 codec rates are already configured, just return
<6>[ 2123.403739] msm_device_put:device speaker_stereo_rx set 0
<6>[ 2137.333502] request_suspend_state: sleep (0->3) at 2137321890537 (2014-02-27 23:27:39.456893993 UTC)
<3>[ 2137.361717] lcdc_lg_panel_power: l10 DISABLE
<6>[ 2137.725636] PM: Syncing filesystems ... skipped for target platform ... done.
<4>[ 2137.731877] Freezing user space processes ... (elapsed 0.01 seconds) done.
<4>[ 2137.753430] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
<4>[ 2137.773412] Suspending console(s) (use no_console_suspend to debug)
<3>[ 2137.789647] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
<3>[ 2137.789658] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
<3>[ 2137.789667] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
<3>[ 2137.797773] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
<3>[ 2137.797783] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
<3>[ 2137.797792] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
<7>[ 2137.798287] lm8502_mod_brightness: set LED2 brightness (0) percent
<7>[ 2137.798611] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[ 2137.803051] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[ 2137.803842] lm8502_mod_brightness: set LED2 brightness (0) percent
<3>[ 2137.807941] msm_wm8958_shutdown_power: codec power shutdown
<3>[ 2137.807955] wm8994_ldo_power: Power down the WM8994 LDOs
<3>[ 2137.807976] wm8994 4-001a: - MEOW wm8994_device_suspend
<6>[ 2137.809242] btuart_pin_mux: off
<4>[ 2137.816025] max8903b_suspend: suspend
<6>[ 2137.817802] PM: suspend of devices complete after 34.255 msecs
<6>[ 2137.818668] PM: late suspend of devices complete after 0.849 msecs
<4>[ 2137.818680] Disabling non-boot CPUs ...
<4>[ 2137.933938] gic_show_resume_irq: 52 triggered
<4>[ 2137.933938] gic_show_resume_irq: 133 triggeredEnabling non-boot CPUs ...
<4>[ 2138.032051] CPU1 is up
<6>[ 2138.032410] PM: early resume of devices complete after 0.342 msecs
<6>[ 2138.032549] mmc1: msmsdcc_irq: SDIO async irq received
<6>[ 2138.033015] wakeup wake lock: mmc1
<3>[ 2138.071673] lsm303dlh_mag_sysfs 0-001e: read transfer error
<3>[ 2138.071684] lsm303dlh_mag_sysfs 0-001e: get_magnetometer_data failed
<4>[ 2138.098928] mmc1: queuing unknown CIS tuple 0x01 (3 bytes)
<4>[ 2138.099401] mmc1: queuing unknown CIS tuple 0x1a (5 bytes)
<4>[ 2138.099613] mmc1: queuing unknown CIS tuple 0x1b (8 bytes)
<4>[ 2138.099663] mmc1: queuing unknown CIS tuple 0x14 (0 bytes)
<4>[ 2138.099896] max8903b_resume: resume
<3>[ 2138.134678] pm_op(): platform_pm_resume+0x0/0x4c returns -22
<3>[ 2138.134690] PM: Device kgsl-2d1.1 failed to resume: error -22
<6>[ 2138.134728] btuart_pin_mux: on
<6>[ 2138.134741] btuart_deassert_rts: 0(get)
<6>[ 2138.134750] btuart_deassert_rts: 0(get)
<6>[ 2138.134759] btuart_deassert_rts: 0(get)
<3>[ 2138.138329] msm_wm8958_setup_power: codec power setup
<3>[ 2138.138359] wm8994_ldo_power: Power up the WM8994 LDOs
<7>[ 2138.186947] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[ 2138.187614] lm8502_mod_brightness: set LED2 brightness (0) percent
<6>[ 2138.190545] PM: resume of devices complete after 156.826 msecs
<4>[ 2138.411974] Restarting tasks ... 
<7>[ 2138.412366] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[ 2138.427777] lm8502_mod_brightness: set LED2 brightness (0) percent
<4>[ 2138.430796] done.
<3>[ 2138.572311] wm8994-codec wm8994-codec: - MEOW wm8994_resume
<6>[ 2138.674410] suspend: exit suspend, ret = 0 (2014-02-27 23:27:40.984371852 UTC)
<6>[ 2138.710272] PM: Syncing filesystems ... skipped for target platform ... done.
<4>[ 2138.718767] Freezing user space processes ... (elapsed 0.01 seconds) done.
<4>[ 2138.735898] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
<4>[ 2138.755811] Suspending console(s) (use no_console_suspend to debug)
<3>[ 2138.774598] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
<3>[ 2138.774609] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
<3>[ 2138.774618] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
<3>[ 2138.782621] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
<3>[ 2138.782631] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
<3>[ 2138.782640] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
<7>[ 2138.783169] lm8502_mod_brightness: set LED2 brightness (0) percent
<7>[ 2138.783520] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[ 2138.788070] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[ 2138.788982] lm8502_mod_brightness: set LED2 brightness (0) percent
<3>[ 2138.793463] msm_wm8958_shutdown_power: codec power shutdown
<3>[ 2138.793497] wm8994_ldo_power: Power down the WM8994 LDOs
<3>[ 2138.793541] wm8994 4-001a: - MEOW wm8994_device_suspend
<6>[ 2138.796091] btuart_pin_mux: off
<4>[ 2138.802191] max8903b_suspend: suspend
<6>[ 2138.804706] PM: suspend of devices complete after 38.674 msecs
<6>[ 2138.806251] PM: late suspend of devices complete after 1.509 msecs
<4>[ 2138.806277] Disabling non-boot CPUs ...
<6>[ 2138.814161] cpufreq: cpu 1 is not active.
<6>[ 2138.824158] cpufreq: cpu 1 is not active.
<4>[ 2138.879029] gic_show_resume_irq: 52 triggered
<4>[ 2138.879029] gic_show_resume_irq: 133 triggeredEnabling non-boot CPUs ...
<4>[ 2138.972485] CPU1 is up
<6>[ 2138.972986] PM: early resume of devices complete after 0.466 msecs
<6>[ 2138.973210] mmc1: msmsdcc_irq: SDIO async irq received
<6>[ 2138.973717] wakeup wake lock: mmc1
<3>[ 2138.981790] lsm303dlh_mag_sysfs 0-001e: read transfer error
<3>[ 2138.981818] lsm303dlh_mag_sysfs 0-001e: get_magnetometer_data failed
<4>[ 2139.039599] mmc1: queuing unknown CIS tuple 0x01 (3 bytes)
<4>[ 2139.040600] mmc1: queuing unknown CIS tuple 0x1a (5 bytes)
<4>[ 2139.041051] mmc1: queuing unknown CIS tuple 0x1b (8 bytes)
<4>[ 2139.041162] mmc1: queuing unknown CIS tuple 0x14 (0 bytes)
<4>[ 2139.041719] max8903b_resume: resume
<3>[ 2139.084097] pm_op(): platform_pm_resume+0x0/0x4c returns -22
<3>[ 2139.084129] PM: Device kgsl-2d1.1 failed to resume: error -22
<6>[ 2139.084210] btuart_pin_mux: on
<6>[ 2139.084241] btuart_deassert_rts: 0(get)
<6>[ 2139.084262] btuart_deassert_rts: 0(get)
<6>[ 2139.084284] btuart_deassert_rts: 0(get)
<3>[ 2139.088977] msm_wm8958_setup_power: codec power setup
<3>[ 2139.089041] wm8994_ldo_power: Power up the WM8994 LDOs
<6>[ 2139.101673] gpio-keys: core navi button released
<7>[ 2139.140045] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[ 2139.140848] lm8502_mod_brightness: set LED2 brightness (0) percent
<6>[ 2139.147567] PM: resume of devices complete after 171.894 msecs
<7>[ 2139.272484] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[ 2139.272880] lm8502_mod_brightness: set LED2 brightness (0) percent
<4>[ 2139.397725] Restarting tasks ... done.
<6>[ 2139.406866] suspend: exit suspend, ret = 0 (2014-02-27 23:27:41.716842371 UTC)
<3>[ 2139.412432] wm8994-codec wm8994-codec: - MEOW wm8994_resume
<6>[ 2139.476406] PM: Syncing filesystems ... skipped for target platform ... done.
<4>[ 2139.482653] Freezing user space processes ... (elapsed 0.02 seconds) done.
<4>[ 2139.505994] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
<4>[ 2139.525912] Suspending console(s) (use no_console_suspend to debug)
<3>[ 2139.547103] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
<3>[ 2139.547115] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
<3>[ 2139.547124] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
<3>[ 2139.555195] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
<3>[ 2139.555204] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
<3>[ 2139.555213] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
<7>[ 2139.555707] lm8502_mod_brightness: set LED2 brightness (0) percent
<7>[ 2139.556030] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[ 2139.560512] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[ 2139.561304] lm8502_mod_brightness: set LED2 brightness (0) percent
<3>[ 2139.565420] msm_wm8958_shutdown_power: codec power shutdown
<3>[ 2139.565435] wm8994_ldo_power: Power down the WM8994 LDOs
<3>[ 2139.565456] wm8994 4-001a: - MEOW wm8994_device_suspend
<6>[ 2139.566736] btuart_pin_mux: off
<4>[ 2139.569421] max8903b_suspend: suspend
<6>[ 2139.571219] PM: suspend of devices complete after 30.600 msecs
<6>[ 2139.572160] PM: late suspend of devices complete after 0.917 msecs
<4>[ 2139.572172] Disabling non-boot CPUs ...
<3>[ 2139.691661] lsm303dlh_mag_sysfs 0-001e: read transfer error
<3>[ 2139.691671] lsm303dlh_mag_sysfs 0-001e: get_magnetometer_data failed
<4>[ 2139.693937] gic_show_resume_irq: 48 triggered
<4>[ 2139.693937] gic_show_resume_irq: 52 triggered
<4>[ 2139.693937] msm_gpio_show_resume_irq: irq 296/gpio 40 triggered wake
<4>[ 2139.694005] Enabling non-boot CPUs ...
<4>[ 2139.792034] CPU1 is up
<6>[ 2139.792393] PM: early resume of devices complete after 0.341 msecs
<6>[ 2139.858600] wakeup wake lock: mmc_delayed_work
<4>[ 2139.858957] mmc1: queuing unknown CIS tuple 0x01 (3 bytes)
<4>[ 2139.859431] mmc1: queuing unknown CIS tuple 0x1a (5 bytes)
<4>[ 2139.859640] mmc1: queuing unknown CIS tuple 0x1b (8 bytes)
<4>[ 2139.859690] mmc1: queuing unknown CIS tuple 0x14 (0 bytes)
<4>[ 2139.859928] max8903b_resume: resume
<3>[ 2139.893790] pm_op(): platform_pm_resume+0x0/0x4c returns -22
<3>[ 2139.893802] PM: Device kgsl-2d1.1 failed to resume: error -22
<6>[ 2139.893840] btuart_pin_mux: on
<6>[ 2139.893853] btuart_deassert_rts: 0(get)
<6>[ 2139.893862] btuart_deassert_rts: 0(get)
<6>[ 2139.893871] btuart_deassert_rts: 0(get)
<4>[ 2139.894337] gpio_keys: forcing GPIO 40 to state 1
<6>[ 2139.894347] gpio-keys: core navi button pressed
<3>[ 2139.897570] msm_wm8958_setup_power: codec power setup
<3>[ 2139.897600] wm8994_ldo_power: Power up the WM8994 LDOs
<6>[ 2139.911642] gpio-keys: core navi button released
<7>[ 2139.946234] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[ 2139.946900] lm8502_mod_brightness: set LED2 brightness (0) percent
<6>[ 2139.949986] PM: resume of devices complete after 157.406 msecs
<7>[ 2140.189248] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[ 2140.195407] lm8502_mod_brightness: set LED2 brightness (0) percent
<4>[ 2140.201570] Restarting tasks ... done.
<6>[ 2140.211356] lsm303dlh_acc_sysfs: hw init start
<6>[ 2140.212852] request_suspend_state: wakeup (3->0) at 2140201225796 (2014-02-27 23:27:43.763555260 UTC)
<6>[ 2140.226966] lsm303dlh_acc_sysfs: hw init done
<3>[ 2140.362209] wm8994-codec wm8994-codec: - MEOW wm8994_resume
<6>[ 2140.463530] suspend: exit suspend, ret = 0 (2014-02-27 23:27:44.014215556 UTC)
<3>[ 2140.496453] lcdc_lg_panel_power: l10 ENABLE
<4>[ 2141.431659] ------------[ cut here ]------------
<4>[ 2141.431702] WARNING: at /home/flintman/source/ever/jelly-bt/kernel/hp/tenderloin/arch/arm/kernel/smp.c:555 resched_cpu+0x4c/0x64()
<4>[ 2141.446697] Modules linked in: ath6kl cfg80211 compat tun ntfs cifs nls_utf8 [last unloaded: ath6kl]
<4>[ 2141.455837] [<80049680>] (unwind_backtrace+0x0/0x164) from [<800b49fc>] (warn_slowpath_common+0x4c/0x64)
<4>[ 2141.465369] [<800b49fc>] (warn_slowpath_common+0x4c/0x64) from [<800b4a2c>] (warn_slowpath_null+0x18/0x1c)
<4>[ 2141.475178] [<800b4a2c>] (warn_slowpath_null+0x18/0x1c) from [<800aa3b8>] (resched_cpu+0x4c/0x64)
<4>[ 2141.483770] [<800aa3b8>] (resched_cpu+0x4c/0x64) from [<800b0bcc>] (scheduler_tick+0x1e4/0x2dc)
<4>[ 2141.492629] [<800b0bcc>] (scheduler_tick+0x1e4/0x2dc) from [<800c04a4>] (update_process_times+0x44/0x50)
<4>[ 2141.502001] [<800c04a4>] (update_process_times+0x44/0x50) from [<800d76d0>] (tick_sched_timer+0x90/0xd0)
<4>[ 2141.511463] [<800d76d0>] (tick_sched_timer+0x90/0xd0) from [<800cde58>] (__run_hrtimer.isra.10+0x90/0x118)
<4>[ 2141.521271] [<800cde58>] (__run_hrtimer.isra.10+0x90/0x118) from [<800ce8ec>] (hrtimer_interrupt+0x134/0x2e0)
<4>[ 2141.530913] [<800ce8ec>] (hrtimer_interrupt+0x134/0x2e0) from [<80052270>] (msm_timer_interrupt+0x34/0x40)
<4>[ 2141.540808] [<80052270>] (msm_timer_interrupt+0x34/0x40) from [<800eaae8>] (handle_IRQ_event+0x24/0xc0)
<4>[ 2141.550093] [<800eaae8>] (handle_IRQ_event+0x24/0xc0) from [<800ecd44>] (handle_percpu_irq+0x4c/0x8c)
<4>[ 2141.559128] [<800ecd44>] (handle_percpu_irq+0x4c/0x8c) from [<80042088>] (asm_do_IRQ+0x88/0xc8)
<4>[ 2141.567972] [<80042088>] (asm_do_IRQ+0x88/0xc8) from [<80042dc8>] (__irq_usr+0x48/0xe0)
<4>[ 2141.575953] Exception stack(0xb7db7fb0 to 0xb7db7ff8)
<4>[ 2141.580816] 7fa0:                                     00000001 00000007 00000001 00000000
<4>[ 2141.588977] 7fc0: 41ef1cc0 00051e78 47c35494 00000001 00000008 2bf6a658 00051e88 0000015e
<4>[ 2141.597135] 7fe0: 00000000 47d35c88 2b33bb15 2b33bb16 20070030 ffffffff
<4>[ 2141.603903] ---[ end trace 4ff948f4409302b8 ]---
<6>[ 2148.277804] msm_device_put:device speaker_stereo_rx set 0
<6>[ 2148.277933] msm_device_put:device speaker_stereo_rx set 1
<3>[ 2148.287349] msm_device_put:device freq =48000
<6>[ 2148.295087] aif1 codec rates are already configured, just return
<6>[ 2151.572865] msm_device_put:device speaker_stereo_rx set 0
<6>[ 2153.125393] msm_device_put:device speaker_stereo_rx set 0
<6>[ 2153.125530] msm_device_put:device speaker_stereo_rx set 1
<3>[ 2153.135015] msm_device_put:device freq =48000
<6>[ 2153.154288] aif1 codec rates are already configured, just return
<6>[ 2158.013018] msm_device_put:device speaker_stereo_rx set 0
<6>[ 2163.021717] gpio-keys: core navi button pressed
<6>[ 2163.241717] gpio-keys: core navi button released
<6>[ 2176.965868] request_suspend_state: sleep (0->3) at 2176954237640 (2014-02-27 23:28:20.516567104 UTC)
<3>[ 2176.991760] lcdc_lg_panel_power: l10 DISABLE
<6>[ 2177.071843] cfg80211: Calling CRDA to update world regulatory domain
<6>[ 2177.119086] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
<3>[ 2177.793484] board_sdio_wifi_disable
<6>[ 2177.801018] tenderloin_wifi_power: New regulator mode for 8058_s3: 1
<6>[ 2177.913276] mmc1: card 0001 removed
<6>[ 2178.413328] CMTP-ATH6KL v2013-07-23-test
<3>[ 2178.413352] board_sdio_wifi_enable
<6>[ 2178.419602] wifi_power(1) 1.8V sdio: set load
<6>[ 2178.424154] tenderloin_wifi_power: New regulator mode for 8058_s3: 1
<6>[ 2178.431243] wifi_power(1) 3.3V
<6>[ 2178.433709] wifi_power(1) 8901_l1 3.3V
<6>[ 2178.437357] wifi_power(1) 8058_l19 1.8V
<4>[ 2178.441089] wifi_power(1) CHIP_PWD
<4>[ 2178.787831] mmc1: queuing unknown CIS tuple 0x01 (3 bytes)
<4>[ 2178.795229] mmc1: queuing unknown CIS tuple 0x1a (5 bytes)
<4>[ 2178.798465] mmc1: queuing unknown CIS tuple 0x1b (8 bytes)
<4>[ 2178.806028] mmc1: queuing unknown CIS tuple 0x14 (0 bytes)
<4>[ 2178.813328] mmc1: queuing unknown CIS tuple 0x80 (1 bytes)
<4>[ 2178.813422] mmc1: queuing unknown CIS tuple 0x81 (1 bytes)
<4>[ 2178.824255] mmc1: queuing unknown CIS tuple 0x82 (1 bytes)
<6>[ 2178.828980] mmc1: new high speed SDIO card at address 0001
<3>[ 2178.878144] ath6kl: temporary war to avoid sdio crc error
<6>[ 2179.334951] ath6kl: ar6003 hw 2.1.1 sdio fw 3.2.0.144
 api 3
<6>[ 2179.335021] ath6kl: firmware supports: sched-scan,sta-p2pdev-duplex,rsn-cap-override
<6>[ 2179.571700] gpio-keys: core navi button pressed
<6>[ 2179.577004] lsm303dlh_acc_sysfs: hw init start
<6>[ 2179.581080] request_suspend_state: wakeup (3->0) at 2179569428306 (2014-02-27 23:28:23.131752881 UTC)
<6>[ 2179.592226] lsm303dlh_acc_sysfs: hw init done
<3>[ 2179.618040] lcdc_lg_panel_power: l10 ENABLE
<6>[ 2179.731674] gpio-keys: core navi button released
<6>[ 2188.775768] ADDRCONF(NETDEV_UP): wlan0: link is not ready
<6>[ 2190.086738] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
<5>[ 2208.904145] msm_timer_set_next_event(12) clock dg_timer, alarm already expired, now cdd6f80d, alarm cdd6f813, late -6 stop printing
<6>[ 2215.913344] msm_device_put:device speaker_stereo_rx set 0
<6>[ 2215.913394] msm_device_put:device speaker_stereo_rx set 1
<3>[ 2215.922787] msm_device_put:device freq =48000
<6>[ 2215.936196] aif1 codec rates are already configured, just return
<6>[ 2219.202997] msm_device_put:device speaker_stereo_rx set 0
<6>[ 2226.411720] gpio-keys: core navi button pressed
<6>[ 2226.531660] gpio-keys: core navi button released
<6>[ 2243.479428] msm_device_put:device speaker_stereo_rx set 0
<6>[ 2243.479465] msm_device_put:device speaker_stereo_rx set 1
<3>[ 2243.479474] msm_device_put:device freq =48000
<6>[ 2243.505316] aif1 codec rates are already configured, just return
<6>[ 2246.786952] msm_device_put:device speaker_stereo_rx set 0
<6>[ 2272.888679] msm_device_put:device speaker_stereo_rx set 0
<6>[ 2272.888729] msm_device_put:device speaker_stereo_rx set 1
<3>[ 2272.898128] msm_device_put:device freq =48000
<6>[ 2272.911010] aif1 codec rates are already configured, just return
<6>[ 2276.172550] msm_device_put:device speaker_stereo_rx set 0
<6>[ 2276.251957] msm_device_put:device speaker_stereo_rx set 0
<6>[ 2276.252008] msm_device_put:device speaker_stereo_rx set 1
<3>[ 2276.261371] msm_device_put:device freq =48000
<6>[ 2276.274401] aif1 codec rates are already configured, just return
<6>[ 2279.554510] msm_device_put:device speaker_stereo_rx set 0
<6>[ 2282.553677] msm_device_put:device speaker_stereo_rx set 0
<6>[ 2282.553713] msm_device_put:device speaker_stereo_rx set 1
<3>[ 2282.553721] msm_device_put:device freq =48000
<6>[ 2282.571711] aif1 codec rates are already configured, just return
<6>[ 2285.844047] msm_device_put:device speaker_stereo_rx set 0
<6>[ 2294.782231] msm_device_put:device speaker_stereo_rx set 0
<6>[ 2294.782281] msm_device_put:device speaker_stereo_rx set 1
<3>[ 2294.791667] msm_device_put:device freq =48000
<6>[ 2294.804650] aif1 codec rates are already configured, just return
<6>[ 2298.062555] msm_device_put:device speaker_stereo_rx set 0
<6>[ 2298.760986] msm_device_put:device speaker_stereo_rx set 0
<6>[ 2298.761024] msm_device_put:device speaker_stereo_rx set 1
<3>[ 2298.761033] msm_device_put:device freq =48000
<6>[ 2298.786703] aif1 codec rates are already configured, just return
<6>[ 2305.342463] msm_device_put:device speaker_stereo_rx set 0
<6>[ 2305.555193] msm_device_put:device speaker_stereo_rx set 0
<6>[ 2305.555244] msm_device_put:device speaker_stereo_rx set 1
<3>[ 2305.564630] msm_device_put:device freq =48000
<6>[ 2305.577976] aif1 codec rates are already configured, just return
<6>[ 2308.842873] msm_device_put:device speaker_stereo_rx set 0
<6>[ 2316.876160] msm_device_put:device speaker_stereo_rx set 0
<6>[ 2316.876197] msm_device_put:device speaker_stereo_rx set 1
<3>[ 2316.876205] msm_device_put:device freq =48000
<6>[ 2316.890306] aif1 codec rates are already configured, just return
<6>[ 2320.153067] msm_device_put:device speaker_stereo_rx set 0
<6>[ 2320.793994] msm_device_put:device speaker_stereo_rx set 0
<6>[ 2320.794030] msm_device_put:device speaker_stereo_rx set 1
<3>[ 2320.794039] msm_device_put:device freq =48000
<6>[ 2320.819790] aif1 codec rates are already configured, just return
<6>[ 2324.052781] msm_device_put:device speaker_stereo_rx set 0
<6>[ 2327.837875] msm_device_put:device speaker_stereo_rx set 0
<6>[ 2327.837935] msm_device_put:device speaker_stereo_rx set 1
<3>[ 2327.847343] msm_device_put:device freq =48000
<6>[ 2327.860830] aif1 codec rates are already configured, just return
<6>[ 2333.873151] msm_device_put:device speaker_stereo_rx set 0
<6>[ 2337.031754] msm_device_put:device speaker_stereo_rx set 0
<6>[ 2337.031805] msm_device_put:device speaker_stereo_rx set 1
<3>[ 2337.041198] msm_device_put:device freq =48000
<6>[ 2337.065817] aif1 codec rates are already configured, just return
<6>[ 2341.942917] msm_device_put:device speaker_stereo_rx set 0
<6>[ 2342.723826] msm_device_put:device speaker_stereo_rx set 0
<6>[ 2342.723864] msm_device_put:device speaker_stereo_rx set 1
<3>[ 2342.723874] msm_device_put:device freq =48000
<6>[ 2342.749843] aif1 codec rates are already configured, just return
<6>[ 2346.012853] msm_device_put:device speaker_stereo_rx set 0
<6>[ 2357.095335] msm_device_put:device speaker_stereo_rx set 0
<6>[ 2357.095386] msm_device_put:device speaker_stereo_rx set 1
<3>[ 2357.104826] msm_device_put:device freq =48000
<6>[ 2357.117631] aif1 codec rates are already configured, just return
<6>[ 2360.382905] msm_device_put:device speaker_stereo_rx set 0
<6>[ 2387.403718] msm_device_put:device speaker_stereo_rx set 0
<6>[ 2387.403754] msm_device_put:device speaker_stereo_rx set 1
<3>[ 2387.403763] msm_device_put:device freq =48000
<6>[ 2387.421159] aif1 codec rates are already configured, just return
<6>[ 2390.682530] msm_device_put:device speaker_stereo_rx set 0
<6>[ 2409.988578] msm_device_put:device speaker_stereo_rx set 0
<6>[ 2409.988652] msm_device_put:device speaker_stereo_rx set 1
<3>[ 2409.998159] msm_device_put:device freq =48000
<6>[ 2410.010926] aif1 codec rates are already configured, just return
<6>[ 2413.272886] msm_device_put:device speaker_stereo_rx set 0
<6>[ 2417.665820] msm_device_put:device speaker_stereo_rx set 0
<6>[ 2417.665871] msm_device_put:device speaker_stereo_rx set 1
<3>[ 2417.675261] msm_device_put:device freq =48000
<6>[ 2417.688326] aif1 codec rates are already configured, just return
<6>[ 2421.872522] msm_device_put:device speaker_stereo_rx set 0
<6>[ 2421.940281] msm_device_put:device speaker_stereo_rx set 0
<6>[ 2421.940337] msm_device_put:device speaker_stereo_rx set 1
<3>[ 2421.949770] msm_device_put:device freq =48000
<6>[ 2421.962669] aif1 codec rates are already configured, just return
<6>[ 2425.232808] msm_device_put:device speaker_stereo_rx set 0
<6>[ 2427.247822] msm_device_put:device speaker_stereo_rx set 0
<6>[ 2427.247859] msm_device_put:device speaker_stereo_rx set 1
<3>[ 2427.247868] msm_device_put:device freq =48000
<6>[ 2427.273658] aif1 codec rates are already configured, just return
<6>[ 2430.532716] msm_device_put:device speaker_stereo_rx set 0
<6>[ 2482.864723] msm_device_put:device speaker_stereo_rx set 0
<6>[ 2482.864774] msm_device_put:device speaker_stereo_rx set 1
<3>[ 2482.874169] msm_device_put:device freq =48000
<6>[ 2482.887155] aif1 codec rates are already configured, just return
<6>[ 2486.152869] msm_device_put:device speaker_stereo_rx set 0
<6>[ 2493.808629] msm_device_put:device speaker_stereo_rx set 0
<6>[ 2493.808665] msm_device_put:device speaker_stereo_rx set 1
<3>[ 2493.808674] msm_device_put:device freq =48000
<6>[ 2493.834408] aif1 codec rates are already configured, just return
<6>[ 2497.103030] msm_device_put:device speaker_stereo_rx set 0
<6>[ 2506.613730] msm_device_put:device speaker_stereo_rx set 0
<6>[ 2506.613782] msm_device_put:device speaker_stereo_rx set 1
<3>[ 2506.623199] msm_device_put:device freq =48000
<6>[ 2506.636014] aif1 codec rates are already configured, just return
<6>[ 2509.892546] msm_device_put:device speaker_stereo_rx set 0
<6>[ 2522.470089] msm_device_put:device speaker_stereo_rx set 0
<6>[ 2522.470141] msm_device_put:device speaker_stereo_rx set 1
<3>[ 2522.479564] msm_device_put:device freq =48000
<6>[ 2522.492741] aif1 codec rates are already configured, just return
<6>[ 2525.767402] msm_device_put:device speaker_stereo_rx set 0
<6>[ 2527.147086] msm_device_put:device speaker_stereo_rx set 0
<6>[ 2527.147122] msm_device_put:device speaker_stereo_rx set 1
<3>[ 2527.147131] msm_device_put:device freq =48000
<6>[ 2527.173113] aif1 codec rates are already configured, just return
<6>[ 2530.442959] msm_device_put:device speaker_stereo_rx set 0
<6>[ 2543.797046] msm_device_put:device speaker_stereo_rx set 0
<6>[ 2543.797096] msm_device_put:device speaker_stereo_rx set 1
<3>[ 2543.806492] msm_device_put:device freq =48000
<6>[ 2543.819540] aif1 codec rates are already configured, just return
<6>[ 2547.072474] msm_device_put:device speaker_stereo_rx set 0
<6>[ 2547.148771] msm_device_put:device speaker_stereo_rx set 0
<6>[ 2547.148824] msm_device_put:device speaker_stereo_rx set 1
<3>[ 2547.158258] msm_device_put:device freq =48000
<6>[ 2547.171107] aif1 codec rates are already configured, just return
<6>[ 2550.442978] msm_device_put:device speaker_stereo_rx set 0
<6>[ 2552.120440] msm_device_put:device speaker_stereo_rx set 0
<6>[ 2552.120490] msm_device_put:device speaker_stereo_rx set 1
<3>[ 2552.129919] msm_device_put:device freq =48000
<6>[ 2552.142868] aif1 codec rates are already configured, just return
<6>[ 2555.412792] msm_device_put:device speaker_stereo_rx set 0
<6>[ 2565.097916] msm_device_put:device speaker_stereo_rx set 0
<6>[ 2565.097952] msm_device_put:device speaker_stereo_rx set 1
<3>[ 2565.097961] msm_device_put:device freq =48000
<6>[ 2565.120669] aif1 codec rates are already configured, just return
<6>[ 2568.393856] msm_device_put:device speaker_stereo_rx set 0
<6>[ 2575.789943] msm_device_put:device speaker_stereo_rx set 0
<6>[ 2575.789995] msm_device_put:device speaker_stereo_rx set 1
<3>[ 2575.799458] msm_device_put:device freq =48000
<6>[ 2575.812270] aif1 codec rates are already configured, just return
<6>[ 2579.083335] msm_device_put:device speaker_stereo_rx set 0
<6>[ 2582.589614] msm_device_put:device speaker_stereo_rx set 0
<6>[ 2582.589665] msm_device_put:device speaker_stereo_rx set 1
<3>[ 2582.599071] msm_device_put:device freq =48000
<6>[ 2582.612117] aif1 codec rates are already configured, just return
<6>[ 2587.072871] msm_device_put:device speaker_stereo_rx set 0
<6>[ 2587.159820] msm_device_put:device speaker_stereo_rx set 0
<6>[ 2587.159953] msm_device_put:device speaker_stereo_rx set 1
<3>[ 2587.169383] msm_device_put:device freq =48000
<6>[ 2587.182356] aif1 codec rates are already configured, just return
<6>[ 2590.473828] msm_device_put:device speaker_stereo_rx set 0
<6>[ 2594.130242] msm_device_put:device speaker_stereo_rx set 0
<6>[ 2594.130376] msm_device_put:device speaker_stereo_rx set 1
<3>[ 2594.139784] msm_device_put:device freq =48000
<6>[ 2594.152813] aif1 codec rates are already configured, just return
<6>[ 2597.433798] msm_device_put:device speaker_stereo_rx set 0
<6>[ 2610.933891] msm_device_put:device speaker_stereo_rx set 0
<6>[ 2610.933994] msm_device_put:device speaker_stereo_rx set 1
<3>[ 2610.934019] msm_device_put:device freq =48000
<6>[ 2610.959427] aif1 codec rates are already configured, just return
<6>[ 2614.247379] msm_device_put:device speaker_stereo_rx set 0
<6>[ 2622.381700] gpio-keys: volume up button pressed
<6>[ 2622.821702] gpio-keys: volume up button released
<6>[ 2635.738055] msm_device_put:device speaker_stereo_rx set 0
<6>[ 2635.738202] msm_device_put:device speaker_stereo_rx set 1
<3>[ 2635.747649] msm_device_put:device freq =48000
<6>[ 2635.767208] aif1 codec rates are already configured, just return
<6>[ 2639.042843] msm_device_put:device speaker_stereo_rx set 0
<6>[ 2644.766100] msm_device_put:device speaker_stereo_rx set 0
<6>[ 2644.766233] msm_device_put:device speaker_stereo_rx set 1
<3>[ 2644.775669] msm_device_put:device freq =48000


Broadcasting: Intent { act=com.evervolv.toolbox.action.DUMPLOGCAT_FINISHED (has extras) }
Broadcast completed: result=0