------ KERNEL LOG (dmesg) ------
irq 293/gpio 37 triggered wake
<4>[ 8275.696280] Enabling non-boot CPUs ...
<3>[ 8275.762235] lsm303dlh_mag_sysfs 0-001e: read transfer error
<3>[ 8275.762258] lsm303dlh_mag_sysfs 0-001e: get_magnetometer_data failed
<4>[ 8275.792863] CPU1 is up
<6>[ 8275.793449] PM: early resume of devices complete after 0.559 msecs
<6>[ 8275.859421] wakeup wake lock: mmc_delayed_work
<4>[ 8275.859979] mmc1: queuing unknown CIS tuple 0x01 (3 bytes)
<4>[ 8275.860768] mmc1: queuing unknown CIS tuple 0x1a (5 bytes)
<4>[ 8275.861120] mmc1: queuing unknown CIS tuple 0x1b (8 bytes)
<4>[ 8275.861205] mmc1: queuing unknown CIS tuple 0x14 (0 bytes)
<4>[ 8275.861519] max8903b_resume: resume
<3>[ 8275.906627] pm_op(): platform_pm_resume+0x0/0x4c returns -22
<3>[ 8275.906648] PM: Device kgsl-2d1.1 failed to resume: error -22
<3>[ 8275.910901] msm_wm8958_setup_power: codec power setup
<3>[ 8275.910946] wm8994_ldo_power: Power up the WM8994 LDOs
<7>[ 8275.960657] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[ 8275.961380] lm8502_mod_brightness: set LED2 brightness (0) percent
<6>[ 8275.966920] PM: resume of devices complete after 173.137 msecs
<4>[ 8276.176656] Restarting tasks ... 
<7>[ 8276.185500] lm8502_mod_brightness: set LED1 brightness (0) percent
<4>[ 8276.190305] done.
<6>[ 8276.192640] suspend: exit suspend, ret = 0 (2015-04-22 17:17:05.726748444 UTC)
<7>[ 8276.197000] lm8502_mod_brightness: set LED2 brightness (0) percent
<3>[ 8276.333002] wm8994-codec wm8994-codec: - MEOW wm8994_resume
<6>[ 8276.470144] PM: Syncing filesystems ... skipped for target platform ... done.
<4>[ 8276.477877] Freezing user space processes ... (elapsed 0.02 seconds) done.
<4>[ 8276.506852] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
<4>[ 8276.526708] Suspending console(s) (use no_console_suspend to debug)
<3>[ 8276.551185] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
<3>[ 8276.551210] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
<3>[ 8276.551231] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
<3>[ 8276.569150] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
<3>[ 8276.569171] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
<3>[ 8276.569192] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
<7>[ 8276.569733] lm8502_mod_brightness: set LED2 brightness (0) percent
<7>[ 8276.570105] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[ 8276.580630] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[ 8276.581571] lm8502_mod_brightness: set LED2 brightness (0) percent
<3>[ 8276.586053] msm_wm8958_shutdown_power: codec power shutdown
<3>[ 8276.586085] wm8994_ldo_power: Power down the WM8994 LDOs
<3>[ 8276.586128] wm8994 4-001a: - MEOW wm8994_device_suspend
<4>[ 8276.597371] max8903b_suspend: suspend
<6>[ 8276.600401] PM: suspend of devices complete after 56.774 msecs
<6>[ 8276.602477] PM: late suspend of devices complete after 2.026 msecs
<4>[ 8276.602505] Disabling non-boot CPUs ...
<4>[ 8276.667999] gic_show_resume_irq: 48 triggered
<4>[ 8276.667999] gic_show_resume_irq: 52 triggered
<4>[ 8276.667999] msm_gpio_show_resume_irq: irq 293/gpio 37 triggered wake
<4>[ 8276.668157] Enabling non-boot CPUs ...
<4>[ 8276.763034] CPU1 is up
<6>[ 8276.763783] PM: early resume of devices complete after 0.714 msecs
<6>[ 8276.829885] wakeup wake lock: mmc_delayed_work
<4>[ 8276.830553] mmc1: queuing unknown CIS tuple 0x01 (3 bytes)
<4>[ 8276.831504] mmc1: queuing unknown CIS tuple 0x1a (5 bytes)
<4>[ 8276.831927] mmc1: queuing unknown CIS tuple 0x1b (8 bytes)
<4>[ 8276.832030] mmc1: queuing unknown CIS tuple 0x14 (0 bytes)
<4>[ 8276.832585] max8903b_resume: resume
<3>[ 8276.877007] pm_op(): platform_pm_resume+0x0/0x4c returns -22
<3>[ 8276.877032] PM: Device kgsl-2d1.1 failed to resume: error -22
<3>[ 8276.881528] msm_wm8958_setup_power: codec power setup
<3>[ 8276.881581] wm8994_ldo_power: Power up the WM8994 LDOs
<7>[ 8276.931750] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[ 8276.932594] lm8502_mod_brightness: set LED2 brightness (0) percent
<6>[ 8276.938867] PM: resume of devices complete after 174.595 msecs
<7>[ 8277.072740] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[ 8277.073123] lm8502_mod_brightness: set LED2 brightness (0) percent
<4>[ 8277.150786] Restarting tasks ... done.
<6>[ 8277.169781] suspend: exit suspend, ret = 0 (2015-04-22 17:17:21.732096444 UTC)
<3>[ 8277.212808] wm8994-codec wm8994-codec: - MEOW wm8994_resume
<6>[ 8277.265979] PM: Syncing filesystems ... skipped for target platform ... done.
<4>[ 8277.272315] Freezing user space processes ... (elapsed 0.02 seconds) done.
<4>[ 8277.296618] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
<4>[ 8277.314059] Suspending console(s) (use no_console_suspend to debug)
<3>[ 8277.333376] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
<3>[ 8277.333389] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
<3>[ 8277.333400] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
<3>[ 8277.342704] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
<3>[ 8277.342714] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
<3>[ 8277.342725] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
<7>[ 8277.343142] lm8502_mod_brightness: set LED2 brightness (0) percent
<7>[ 8277.343471] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[ 8277.348724] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[ 8277.349546] lm8502_mod_brightness: set LED2 brightness (0) percent
<3>[ 8277.353716] msm_wm8958_shutdown_power: codec power shutdown
<3>[ 8277.353732] wm8994_ldo_power: Power down the WM8994 LDOs
<3>[ 8277.353754] wm8994 4-001a: - MEOW wm8994_device_suspend
<4>[ 8277.358823] max8903b_suspend: suspend
<6>[ 8277.360676] PM: suspend of devices complete after 31.609 msecs
<6>[ 8277.361616] PM: late suspend of devices complete after 0.922 msecs
<4>[ 8277.361629] Disabling non-boot CPUs ...
<4>[ 8277.435146] gic_show_resume_irq: 48 triggered
<4>[ 8277.435146] gic_show_resume_irq: 52 triggered
<4>[ 8277.435146] msm_gpio_show_resume_irq: irq 293/gpio 37 triggered wake
<4>[ 8277.435223] Enabling non-boot CPUs ...
<4>[ 8277.532660] CPU1 is up
<6>[ 8277.533026] PM: early resume of devices complete after 0.348 msecs
<3>[ 8277.552228] lsm303dlh_mag_sysfs 0-001e: read transfer error
<3>[ 8277.552241] lsm303dlh_mag_sysfs 0-001e: get_magnetometer_data failed
<6>[ 8277.599190] wakeup wake lock: mmc_delayed_work
<4>[ 8277.599577] mmc1: queuing unknown CIS tuple 0x01 (3 bytes)
<4>[ 8277.600102] mmc1: queuing unknown CIS tuple 0x1a (5 bytes)
<4>[ 8277.600336] mmc1: queuing unknown CIS tuple 0x1b (8 bytes)
<4>[ 8277.600393] mmc1: queuing unknown CIS tuple 0x14 (0 bytes)
<4>[ 8277.600653] max8903b_resume: resume
<3>[ 8277.635308] pm_op(): platform_pm_resume+0x0/0x4c returns -22
<3>[ 8277.635322] PM: Device kgsl-2d1.1 failed to resume: error -22
<3>[ 8277.639065] msm_wm8958_setup_power: codec power setup
<3>[ 8277.639098] wm8994_ldo_power: Power up the WM8994 LDOs
<7>[ 8277.688062] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[ 8277.688746] lm8502_mod_brightness: set LED2 brightness (0) percent
<6>[ 8277.692301] PM: resume of devices complete after 159.055 msecs
<4>[ 8277.899493] Restarting tasks ... 
<7>[ 8277.906406] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[ 8277.913471] lm8502_mod_brightness: set LED2 brightness (0) percent
<4>[ 8277.914509] done.
<6>[ 8277.920738] suspend: exit suspend, ret = 0 (2015-04-22 17:17:37.729207999 UTC)
<3>[ 8278.052919] wm8994-codec wm8994-codec: - MEOW wm8994_resume
<6>[ 8278.198508] PM: Syncing filesystems ... skipped for target platform ... done.
<4>[ 8278.205150] Freezing user space processes ... (elapsed 0.02 seconds) done.
<4>[ 8278.236496] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
<4>[ 8278.256427] Suspending console(s) (use no_console_suspend to debug)
<3>[ 8278.270697] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
<3>[ 8278.270709] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
<3>[ 8278.270718] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
<3>[ 8278.278818] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
<3>[ 8278.278828] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
<3>[ 8278.278837] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
<7>[ 8278.279237] lm8502_mod_brightness: set LED2 brightness (0) percent
<7>[ 8278.279562] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[ 8278.284193] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[ 8278.285002] lm8502_mod_brightness: set LED2 brightness (0) percent
<3>[ 8278.289132] msm_wm8958_shutdown_power: codec power shutdown
<3>[ 8278.289147] wm8994_ldo_power: Power down the WM8994 LDOs
<3>[ 8278.289168] wm8994 4-001a: - MEOW wm8994_device_suspend
<4>[ 8278.295433] max8903b_suspend: suspend
<6>[ 8278.297205] PM: suspend of devices complete after 30.583 msecs
<6>[ 8278.298058] PM: late suspend of devices complete after 0.836 msecs
<4>[ 8278.298069] Disabling non-boot CPUs ...
<6>[ 8278.304708] cpufreq: cpu 1 is not active.
<4>[ 8278.414627] gic_show_resume_irq: 48 triggered
<4>[ 8278.414627] gic_show_resume_irq: 52 triggered
<4>[ 8278.414627] msm_gpio_show_resume_irq: irq 293/gpio 37 triggered wake
<4>[ 8278.414692] Enabling non-boot CPUs ...
<3>[ 8278.462211] lsm303dlh_mag_sysfs 0-001e: read transfer error
<3>[ 8278.462223] lsm303dlh_mag_sysfs 0-001e: get_magnetometer_data failed
<4>[ 8278.512536] CPU1 is up
<6>[ 8278.512889] PM: early resume of devices complete after 0.337 msecs
<6>[ 8278.579159] wakeup wake lock: mmc_delayed_work
<4>[ 8278.579516] mmc1: queuing unknown CIS tuple 0x01 (3 bytes)
<4>[ 8278.579989] mmc1: queuing unknown CIS tuple 0x1a (5 bytes)
<4>[ 8278.580200] mmc1: queuing unknown CIS tuple 0x1b (8 bytes)
<4>[ 8278.580251] mmc1: queuing unknown CIS tuple 0x14 (0 bytes)
<4>[ 8278.580490] max8903b_resume: resume
<3>[ 8278.614266] pm_op(): platform_pm_resume+0x0/0x4c returns -22
<3>[ 8278.614279] PM: Device kgsl-2d1.1 failed to resume: error -22
<3>[ 8278.617837] msm_wm8958_setup_power: codec power setup
<3>[ 8278.617867] wm8994_ldo_power: Power up the WM8994 LDOs
<7>[ 8278.666227] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[ 8278.666892] lm8502_mod_brightness: set LED2 brightness (0) percent
<6>[ 8278.669943] PM: resume of devices complete after 156.852 msecs
<4>[ 8278.880729] Restarting tasks ... 
<7>[ 8278.887413] lm8502_mod_brightness: set LED1 brightness (0) percent
<4>[ 8278.892211] done.
<6>[ 8278.894437] suspend: exit suspend, ret = 0 (2015-04-22 17:17:52.725142372 UTC)
<7>[ 8278.896226] lm8502_mod_brightness: set LED2 brightness (0) percent
<3>[ 8279.032881] wm8994-codec wm8994-codec: - MEOW wm8994_resume
<6>[ 8279.167902] PM: Syncing filesystems ... skipped for target platform ... done.
<4>[ 8279.174185] Freezing user space processes ... (elapsed 0.02 seconds) done.
<4>[ 8279.196770] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
<4>[ 8279.216630] Suspending console(s) (use no_console_suspend to debug)
<3>[ 8279.237578] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
<3>[ 8279.237599] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
<3>[ 8279.237616] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
<3>[ 8279.252526] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
<3>[ 8279.252543] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
<3>[ 8279.252559] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
<7>[ 8279.253050] lm8502_mod_brightness: set LED2 brightness (0) percent
<7>[ 8279.253403] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[ 8279.261650] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[ 8279.262610] lm8502_mod_brightness: set LED2 brightness (0) percent
<3>[ 8279.266888] msm_wm8958_shutdown_power: codec power shutdown
<3>[ 8279.266913] wm8994_ldo_power: Power down the WM8994 LDOs
<3>[ 8279.266948] wm8994 4-001a: - MEOW wm8994_device_suspend
<4>[ 8279.277563] max8903b_suspend: suspend
<6>[ 8279.279832] PM: suspend of devices complete after 47.208 msecs
<6>[ 8279.281284] PM: late suspend of devices complete after 1.424 msecs
<4>[ 8279.281305] Disabling non-boot CPUs ...
<4>[ 8279.346241] gic_show_resume_irq: 48 triggered
<4>[ 8279.346241] gic_show_resume_irq: 52 triggered
<4>[ 8279.346241] msm_gpio_show_resume_irq: irq 293/gpio 37 triggered wake
<4>[ 8279.346363] Enabling non-boot CPUs ...
<4>[ 8279.442896] CPU1 is up
<6>[ 8279.443484] PM: early resume of devices complete after 0.560 msecs
<6>[ 8279.509280] wakeup wake lock: mmc_delayed_work
<4>[ 8279.509839] mmc1: queuing unknown CIS tuple 0x01 (3 bytes)
<4>[ 8279.510629] mmc1: queuing unknown CIS tuple 0x1a (5 bytes)
<4>[ 8279.510980] mmc1: queuing unknown CIS tuple 0x1b (8 bytes)
<4>[ 8279.511065] mmc1: queuing unknown CIS tuple 0x14 (0 bytes)
<4>[ 8279.511439] max8903b_resume: resume
<3>[ 8279.556631] pm_op(): platform_pm_resume+0x0/0x4c returns -22
<3>[ 8279.556652] PM: Device kgsl-2d1.1 failed to resume: error -22
<3>[ 8279.560888] msm_wm8958_setup_power: codec power setup
<3>[ 8279.560935] wm8994_ldo_power: Power up the WM8994 LDOs
<7>[ 8279.610672] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[ 8279.611395] lm8502_mod_brightness: set LED2 brightness (0) percent
<6>[ 8279.616785] PM: resume of devices complete after 172.971 msecs
<4>[ 8279.815868] Restarting tasks ... 
<7>[ 8279.824733] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[ 8279.831998] lm8502_mod_brightness: set LED2 brightness (0) percent
<4>[ 8279.835976] done.
<3>[ 8279.972873] wm8994-codec wm8994-codec: - MEOW wm8994_resume
<6>[ 8280.077179] suspend: exit suspend, ret = 0 (2015-04-22 17:18:08.961420445 UTC)
<6>[ 8280.160365] PM: Syncing filesystems ... skipped for target platform ... done.
<4>[ 8280.166887] Freezing user space processes ... (elapsed 0.02 seconds) done.
<4>[ 8280.194394] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
<4>[ 8280.214215] Suspending console(s) (use no_console_suspend to debug)
<3>[ 8280.244289] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
<3>[ 8280.244322] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
<3>[ 8280.244351] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
<3>[ 8280.269419] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
<3>[ 8280.269448] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
<3>[ 8280.269474] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
<7>[ 8280.270094] lm8502_mod_brightness: set LED2 brightness (0) percent
<7>[ 8280.270495] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[ 8280.284390] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[ 8280.285403] lm8502_mod_brightness: set LED2 brightness (0) percent
<3>[ 8280.290044] msm_wm8958_shutdown_power: codec power shutdown
<3>[ 8280.290085] wm8994_ldo_power: Power down the WM8994 LDOs
<3>[ 8280.290141] wm8994 4-001a: - MEOW wm8994_device_suspend
<4>[ 8280.302434] max8903b_suspend: suspend
<6>[ 8280.305845] PM: suspend of devices complete after 74.031 msecs
<6>[ 8280.308114] PM: late suspend of devices complete after 2.224 msecs
<4>[ 8280.308148] Disabling non-boot CPUs ...
<4>[ 8280.379550] gic_show_resume_irq: 48 triggered
<4>[ 8280.379550] gic_show_resume_irq: 52 triggered
<4>[ 8280.379550] msm_gpio_show_resume_irq: irq 293/gpio 37 triggered wake
<4>[ 8280.379735] Enabling non-boot CPUs ...
<3>[ 8280.412314] lsm303dlh_mag_sysfs 0-001e: read transfer error
<3>[ 8280.412350] lsm303dlh_mag_sysfs 0-001e: get_magnetometer_data failed
<4>[ 8280.473244] CPU1 is up
<6>[ 8280.474104] PM: early resume of devices complete after 0.816 msecs
<6>[ 8280.540342] wakeup wake lock: mmc_delayed_work
<4>[ 8280.541174] mmc1: queuing unknown CIS tuple 0x01 (3 bytes)
<4>[ 8280.542507] mmc1: queuing unknown CIS tuple 0x1a (5 bytes)
<4>[ 8280.543056] mmc1: queuing unknown CIS tuple 0x1b (8 bytes)
<4>[ 8280.543190] mmc1: queuing unknown CIS tuple 0x14 (0 bytes)
<4>[ 8280.543755] max8903b_resume: resume
<3>[ 8280.587154] pm_op(): platform_pm_resume+0x0/0x4c returns -22
<3>[ 8280.587188] PM: Device kgsl-2d1.1 failed to resume: error -22
<3>[ 8280.592030] msm_wm8958_setup_power: codec power setup
<3>[ 8280.592100] wm8994_ldo_power: Power up the WM8994 LDOs
<7>[ 8280.643992] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[ 8280.644822] lm8502_mod_brightness: set LED2 brightness (0) percent
<6>[ 8280.653377] PM: resume of devices complete after 178.698 msecs
<4>[ 8280.867718] Restarting tasks ... 
<7>[ 8280.881850] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[ 8280.891175] lm8502_mod_brightness: set LED2 brightness (0) percent
<4>[ 8280.891686] done.
<3>[ 8281.042872] wm8994-codec wm8994-codec: - MEOW wm8994_resume
<6>[ 8281.143672] suspend: exit suspend, ret = 0 (2015-04-22 17:18:24.991951555 UTC)
<6>[ 8281.180161] PM: Syncing filesystems ... skipped for target platform ... done.
<4>[ 8281.186572] Freezing user space processes ... (elapsed 0.03 seconds) done.
<4>[ 8281.226717] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
<4>[ 8281.244157] Suspending console(s) (use no_console_suspend to debug)
<3>[ 8281.273319] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
<3>[ 8281.273350] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
<3>[ 8281.273377] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
<3>[ 8281.298627] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
<3>[ 8281.298655] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
<3>[ 8281.298681] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
<7>[ 8281.299300] lm8502_mod_brightness: set LED2 brightness (0) percent
<7>[ 8281.299701] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[ 8281.313023] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[ 8281.314067] lm8502_mod_brightness: set LED2 brightness (0) percent
<3>[ 8281.318523] msm_wm8958_shutdown_power: codec power shutdown
<3>[ 8281.318561] wm8994_ldo_power: Power down the WM8994 LDOs
<3>[ 8281.318607] wm8994 4-001a: - MEOW wm8994_device_suspend
<4>[ 8281.328768] max8903b_suspend: suspend
<6>[ 8281.332126] PM: suspend of devices complete after 71.125 msecs
<6>[ 8281.334125] PM: late suspend of devices complete after 1.950 msecs
<4>[ 8281.334155] Disabling non-boot CPUs ...
<4>[ 8281.398749] gic_show_resume_irq: 48 triggered
<4>[ 8281.398749] gic_show_resume_irq: 52 triggered
<4>[ 8281.398749] msm_gpio_show_resume_irq: irq 293/gpio 37 triggered wake
<4>[ 8281.398896] Enabling non-boot CPUs ...
<4>[ 8281.493162] CPU1 is up
<6>[ 8281.493760] PM: early resume of devices complete after 0.560 msecs
<3>[ 8281.522296] lsm303dlh_mag_sysfs 0-001e: read transfer error
<3>[ 8281.522325] lsm303dlh_mag_sysfs 0-001e: get_magnetometer_data failed
<6>[ 8281.560232] wakeup wake lock: mmc_delayed_work
<4>[ 8281.560997] mmc1: queuing unknown CIS tuple 0x01 (3 bytes)
<4>[ 8281.562134] mmc1: queuing unknown CIS tuple 0x1a (5 bytes)
<4>[ 8281.562745] mmc1: queuing unknown CIS tuple 0x1b (8 bytes)
<4>[ 8281.562874] mmc1: queuing unknown CIS tuple 0x14 (0 bytes)
<4>[ 8281.563399] max8903b_resume: resume
<3>[ 8281.605885] pm_op(): platform_pm_resume+0x0/0x4c returns -22
<3>[ 8281.605919] PM: Device kgsl-2d1.1 failed to resume: error -22
<3>[ 8281.610762] msm_wm8958_setup_power: codec power setup
<3>[ 8281.610832] wm8994_ldo_power: Power up the WM8994 LDOs
<7>[ 8281.662671] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[ 8281.663479] lm8502_mod_brightness: set LED2 brightness (0) percent
<6>[ 8281.671928] PM: resume of devices complete after 177.772 msecs
<7>[ 8281.768234] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[ 8281.768654] lm8502_mod_brightness: set LED2 brightness (0) percent
<4>[ 8281.898599] Restarting tasks ... done.
<3>[ 8281.912889] wm8994-codec wm8994-codec: - MEOW wm8994_resume
<6>[ 8281.985992] suspend: exit suspend, ret = 0 (2015-04-22 17:18:40.815617037 UTC)
<6>[ 8282.017116] PM: Syncing filesystems ... skipped for target platform ... done.
<4>[ 8282.023549] Freezing user space processes ... (elapsed 0.02 seconds) done.
<4>[ 8282.054080] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
<4>[ 8282.064017] Suspending console(s) (use no_console_suspend to debug)
<3>[ 8282.081675] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
<3>[ 8282.081695] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
<3>[ 8282.081711] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
<3>[ 8282.096617] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
<3>[ 8282.096634] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
<3>[ 8282.096650] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
<7>[ 8282.097130] lm8502_mod_brightness: set LED2 brightness (0) percent
<7>[ 8282.097482] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[ 8282.107128] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[ 8282.108007] lm8502_mod_brightness: set LED2 brightness (0) percent
<3>[ 8282.112311] msm_wm8958_shutdown_power: codec power shutdown
<3>[ 8282.112334] wm8994_ldo_power: Power down the WM8994 LDOs
<3>[ 8282.112365] wm8994 4-001a: - MEOW wm8994_device_suspend
<4>[ 8282.121033] max8903b_suspend: suspend
<6>[ 8282.123328] PM: suspend of devices complete after 46.438 msecs
<6>[ 8282.124598] PM: late suspend of devices complete after 1.245 msecs
<4>[ 8282.124617] Disabling non-boot CPUs ...
<4>[ 8282.196191] gic_show_resume_irq: 48 triggered
<4>[ 8282.196191] gic_show_resume_irq: 52 triggered
<4>[ 8282.196191] msm_gpio_show_resume_irq: irq 293/gpio 37 triggered wake
<4>[ 8282.196293] Enabling non-boot CPUs ...
<3>[ 8282.242254] lsm303dlh_mag_sysfs 0-001e: read transfer error
<3>[ 8282.242274] lsm303dlh_mag_sysfs 0-001e: get_magnetometer_data failed
<4>[ 8282.292791] CPU1 is up
<6>[ 8282.293241] PM: early resume of devices complete after 0.425 msecs
<6>[ 8282.359417] wakeup wake lock: mmc_delayed_work
<4>[ 8282.359946] mmc1: queuing unknown CIS tuple 0x01 (3 bytes)
<4>[ 8282.360692] mmc1: queuing unknown CIS tuple 0x1a (5 bytes)
<4>[ 8282.361025] mmc1: queuing unknown CIS tuple 0x1b (8 bytes)
<4>[ 8282.361105] mmc1: queuing unknown CIS tuple 0x14 (0 bytes)
<4>[ 8282.361461] max8903b_resume: resume
<3>[ 8282.405549] pm_op(): platform_pm_resume+0x0/0x4c returns -22
<3>[ 8282.405570] PM: Device kgsl-2d1.1 failed to resume: error -22
<3>[ 8282.409823] msm_wm8958_setup_power: codec power setup
<3>[ 8282.409870] wm8994_ldo_power: Power up the WM8994 LDOs
<7>[ 8282.459630] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[ 8282.460353] lm8502_mod_brightness: set LED2 brightness (0) percent
<6>[ 8282.465727] PM: resume of devices complete after 172.206 msecs
<7>[ 8282.595797] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[ 8282.596170] lm8502_mod_brightness: set LED2 brightness (0) percent
<4>[ 8282.688276] Restarting tasks ... done.
<6>[ 8282.708008] suspend: exit suspend, ret = 0 (2015-04-22 17:18:56.743275852 UTC)
<3>[ 8282.735482] wm8994-codec wm8994-codec: - MEOW wm8994_resume
<6>[ 8282.798727] PM: Syncing filesystems ... skipped for target platform ... done.
<4>[ 8282.806996] Freezing user space processes ... (elapsed 0.01 seconds) done.
<4>[ 8282.826510] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
<4>[ 8282.846438] Suspending console(s) (use no_console_suspend to debug)
<3>[ 8282.860844] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
<3>[ 8282.860857] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
<3>[ 8282.860868] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
<3>[ 8282.870221] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
<3>[ 8282.870232] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
<3>[ 8282.870242] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
<7>[ 8282.870648] lm8502_mod_brightness: set LED2 brightness (0) percent
<7>[ 8282.870976] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[ 8282.876098] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[ 8282.876916] lm8502_mod_brightness: set LED2 brightness (0) percent
<3>[ 8282.881071] msm_wm8958_shutdown_power: codec power shutdown
<3>[ 8282.881087] wm8994_ldo_power: Power down the WM8994 LDOs
<3>[ 8282.881109] wm8994 4-001a: - MEOW wm8994_device_suspend
<4>[ 8282.885426] max8903b_suspend: suspend
<6>[ 8282.887272] PM: suspend of devices complete after 30.599 msecs
<6>[ 8282.888181] PM: late suspend of devices complete after 0.891 msecs
<4>[ 8282.888194] Disabling non-boot CPUs ...
<6>[ 8282.894749] cpufreq: cpu 1 is not active.
<4>[ 8283.007253] gic_show_resume_irq: 48 triggered
<4>[ 8283.007253] gic_show_resume_irq: 52 triggered
<4>[ 8283.007253] msm_gpio_show_resume_irq: irq 293/gpio 37 triggered wake
<4>[ 8283.007337] Enabling non-boot CPUs ...
<4>[ 8283.102605] CPU1 is up
<6>[ 8283.102965] PM: early resume of devices complete after 0.342 msecs
<3>[ 8283.152231] lsm303dlh_mag_sysfs 0-001e: read transfer error
<3>[ 8283.152244] lsm303dlh_mag_sysfs 0-001e: get_magnetometer_data failed
<6>[ 8283.169205] wakeup wake lock: mmc_delayed_work
<4>[ 8283.169582] mmc1: queuing unknown CIS tuple 0x01 (3 bytes)
<4>[ 8283.170094] mmc1: queuing unknown CIS tuple 0x1a (5 bytes)
<4>[ 8283.170322] mmc1: queuing unknown CIS tuple 0x1b (8 bytes)
<4>[ 8283.170378] mmc1: queuing unknown CIS tuple 0x14 (0 bytes)
<4>[ 8283.170632] max8903b_resume: resume
<3>[ 8283.204078] pm_op(): platform_pm_resume+0x0/0x4c returns -22
<3>[ 8283.204092] PM: Device kgsl-2d1.1 failed to resume: error -22
<3>[ 8283.207730] msm_wm8958_setup_power: codec power setup
<3>[ 8283.207763] wm8994_ldo_power: Power up the WM8994 LDOs
<7>[ 8283.256474] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[ 8283.257146] lm8502_mod_brightness: set LED2 brightness (0) percent
<6>[ 8283.260524] PM: resume of devices complete after 157.319 msecs
<4>[ 8283.472430] Restarting tasks ... 
<7>[ 8283.472910] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[ 8283.491244] lm8502_mod_brightness: set LED2 brightness (0) percent
<4>[ 8283.493644] done.
<3>[ 8283.632911] wm8994-codec wm8994-codec: - MEOW wm8994_resume
<6>[ 8283.732905] suspend: exit suspend, ret = 0 (2015-04-22 17:19:11.973085630 UTC)
<6>[ 8283.771385] PM: Syncing filesystems ... skipped for target platform ... done.
<4>[ 8283.777844] Freezing user space processes ... (elapsed 0.03 seconds) done.
<4>[ 8283.814263] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
<4>[ 8283.834166] Suspending console(s) (use no_console_suspend to debug)
<3>[ 8283.863169] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
<3>[ 8283.863200] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
<3>[ 8283.863226] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
<3>[ 8283.888238] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
<3>[ 8283.888266] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
<3>[ 8283.888292] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
<7>[ 8283.888885] lm8502_mod_brightness: set LED2 brightness (0) percent
<7>[ 8283.889277] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[ 8283.902494] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[ 8283.903480] lm8502_mod_brightness: set LED2 brightness (0) percent
<3>[ 8283.908050] msm_wm8958_shutdown_power: codec power shutdown
<3>[ 8283.908087] wm8994_ldo_power: Power down the WM8994 LDOs
<3>[ 8283.908136] wm8994 4-001a: - MEOW wm8994_device_suspend
<4>[ 8283.918275] max8903b_suspend: suspend
<6>[ 8283.921635] PM: suspend of devices complete after 70.790 msecs
<6>[ 8283.923634] PM: late suspend of devices complete after 1.950 msecs
<4>[ 8283.923663] Disabling non-boot CPUs ...
<4>[ 8283.987954] gic_show_resume_irq: 48 triggered
<4>[ 8283.987954] gic_show_resume_irq: 52 triggered
<4>[ 8283.987954] msm_gpio_show_resume_irq: irq 293/gpio 37 triggered wake
<4>[ 8283.988102] Enabling non-boot CPUs ...
<3>[ 8284.062301] lsm303dlh_mag_sysfs 0-001e: read transfer error
<3>[ 8284.062332] lsm303dlh_mag_sysfs 0-001e: get_magnetometer_data failed
<4>[ 8284.083169] CPU1 is up
<6>[ 8284.083763] PM: early resume of devices complete after 0.558 msecs
<6>[ 8284.150254] wakeup wake lock: mmc_delayed_work
<4>[ 8284.151017] mmc1: queuing unknown CIS tuple 0x01 (3 bytes)
<4>[ 8284.152151] mmc1: queuing unknown CIS tuple 0x1a (5 bytes)
<4>[ 8284.152764] mmc1: queuing unknown CIS tuple 0x1b (8 bytes)
<4>[ 8284.152894] mmc1: queuing unknown CIS tuple 0x14 (0 bytes)
<4>[ 8284.153418] max8903b_resume: resume
<3>[ 8284.195896] pm_op(): platform_pm_resume+0x0/0x4c returns -22
<3>[ 8284.195929] PM: Device kgsl-2d1.1 failed to resume: error -22
<3>[ 8284.200771] msm_wm8958_setup_power: codec power setup
<3>[ 8284.200846] wm8994_ldo_power: Power up the WM8994 LDOs
<7>[ 8284.252690] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[ 8284.253498] lm8502_mod_brightness: set LED2 brightness (0) percent
<6>[ 8284.261950] PM: resume of devices complete after 177.796 msecs
<4>[ 8284.476633] Restarting tasks ... 
<7>[ 8284.489926] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[ 8284.498142] lm8502_mod_brightness: set LED2 brightness (0) percent
<4>[ 8284.503009] done.
<3>[ 8284.642940] wm8994-codec wm8994-codec: - MEOW wm8994_resume
<6>[ 8284.742665] suspend: exit suspend, ret = 0 (2015-04-22 17:19:27.982258815 UTC)
<6>[ 8284.778260] PM: Syncing filesystems ... skipped for target platform ... done.
<4>[ 8284.784545] Freezing user space processes ... (elapsed 0.03 seconds) done.
<4>[ 8284.816751] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
<4>[ 8284.836649] Suspending console(s) (use no_console_suspend to debug)
<3>[ 8284.857594] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
<3>[ 8284.857616] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
<3>[ 8284.857633] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
<3>[ 8284.872554] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
<3>[ 8284.872572] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
<3>[ 8284.872588] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
<7>[ 8284.873086] lm8502_mod_brightness: set LED2 brightness (0) percent
<7>[ 8284.873439] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[ 8284.881736] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[ 8284.882627] lm8502_mod_brightness: set LED2 brightness (0) percent
<3>[ 8284.886904] msm_wm8958_shutdown_power: codec power shutdown
<3>[ 8284.886929] wm8994_ldo_power: Power down the WM8994 LDOs
<3>[ 8284.886966] wm8994 4-001a: - MEOW wm8994_device_suspend
<4>[ 8284.897577] max8903b_suspend: suspend
<6>[ 8284.899855] PM: suspend of devices complete after 47.243 msecs
<6>[ 8284.901324] PM: late suspend of devices complete after 1.441 msecs
<4>[ 8284.901345] Disabling non-boot CPUs ...
<4>[ 8285.016441] gic_show_resume_irq: 48 triggered
<4>[ 8285.016441] gic_show_resume_irq: 52 triggered
<4>[ 8285.016441] msm_gpio_show_resume_irq: irq 293/gpio 37 triggered wake
<4>[ 8285.016563] Enabling non-boot CPUs ...
<4>[ 8285.112911] CPU1 is up
<6>[ 8285.113502] PM: early resume of devices complete after 0.562 msecs
<3>[ 8285.174802] lsm303dlh_mag_sysfs 0-001e: read transfer error
<3>[ 8285.174834] lsm303dlh_mag_sysfs 0-001e: get_magnetometer_data failed
<6>[ 8285.179462] wakeup wake lock: mmc_delayed_work
<4>[ 8285.180020] mmc1: queuing unknown CIS tuple 0x01 (3 bytes)
<4>[ 8285.180811] mmc1: queuing unknown CIS tuple 0x1a (5 bytes)
<4>[ 8285.181163] mmc1: queuing unknown CIS tuple 0x1b (8 bytes)
<4>[ 8285.181248] mmc1: queuing unknown CIS tuple 0x14 (0 bytes)
<4>[ 8285.181622] max8903b_resume: resume
<3>[ 8285.226662] pm_op(): platform_pm_resume+0x0/0x4c returns -22
<3>[ 8285.226683] PM: Device kgsl-2d1.1 failed to resume: error -22
<3>[ 8285.230931] msm_wm8958_setup_power: codec power setup
<3>[ 8285.230977] wm8994_ldo_power: Power up the WM8994 LDOs
<7>[ 8285.280706] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[ 8285.281429] lm8502_mod_brightness: set LED2 brightness (0) percent
<6>[ 8285.286795] PM: resume of devices complete after 172.961 msecs
<4>[ 8285.497003] Restarting tasks ... 
<7>[ 8285.506312] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[ 8285.513681] lm8502_mod_brightness: set LED2 brightness (0) percent
<4>[ 8285.516670] done.
<3>[ 8285.652920] wm8994-codec wm8994-codec: - MEOW wm8994_resume
<6>[ 8285.753476] suspend: exit suspend, ret = 0 (2015-04-22 17:19:43.967679556 UTC)
<6>[ 8285.790195] PM: Syncing filesystems ... skipped for target platform ... done.
<4>[ 8285.796614] Freezing user space processes ... (elapsed 0.02 seconds) done.
<4>[ 8285.824240] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
<4>[ 8285.844130] Suspending console(s) (use no_console_suspend to debug)
<3>[ 8285.873273] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
<3>[ 8285.873303] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
<3>[ 8285.873330] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
<3>[ 8285.898345] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
<3>[ 8285.898373] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
<3>[ 8285.898398] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
<7>[ 8285.898991] lm8502_mod_brightness: set LED2 brightness (0) percent
<7>[ 8285.899382] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[ 8285.912498] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[ 8285.913485] lm8502_mod_brightness: set LED2 brightness (0) percent
<3>[ 8285.918051] msm_wm8958_shutdown_power: codec power shutdown
<3>[ 8285.918088] wm8994_ldo_power: Power down the WM8994 LDOs
<3>[ 8285.918135] wm8994 4-001a: - MEOW wm8994_device_suspend
<4>[ 8285.928291] max8903b_suspend: suspend
<6>[ 8285.931623] PM: suspend of devices complete after 70.620 msecs
<6>[ 8285.933622] PM: late suspend of devices complete after 1.949 msecs
<4>[ 8285.933652] Disabling non-boot CPUs ...
<4>[ 8285.999242] gic_show_resume_irq: 48 triggered
<4>[ 8285.999242] gic_show_resume_irq: 52 triggered
<4>[ 8285.999242] msm_gpio_show_resume_irq: irq 293/gpio 37 triggered wake
<4>[ 8285.999389] Enabling non-boot CPUs ...
<3>[ 8286.082306] lsm303dlh_mag_sysfs 0-001e: read transfer error
<3>[ 8286.082337] lsm303dlh_mag_sysfs 0-001e: get_magnetometer_data failed
<4>[ 8286.093189] CPU1 is up
<6>[ 8286.093786] PM: early resume of devices complete after 0.559 msecs
<6>[ 8286.160270] wakeup wake lock: mmc_delayed_work
<4>[ 8286.161034] mmc1: queuing unknown CIS tuple 0x01 (3 bytes)
<4>[ 8286.162170] mmc1: queuing unknown CIS tuple 0x1a (5 bytes)
<4>[ 8286.162785] mmc1: queuing unknown CIS tuple 0x1b (8 bytes)
<4>[ 8286.162915] mmc1: queuing unknown CIS tuple 0x14 (0 bytes)
<4>[ 8286.163440] max8903b_resume: resume
<3>[ 8286.205918] pm_op(): platform_pm_resume+0x0/0x4c returns -22
<3>[ 8286.205952] PM: Device kgsl-2d1.1 failed to resume: error -22
<3>[ 8286.210982] msm_wm8958_setup_power: codec power setup
<3>[ 8286.211051] wm8994_ldo_power: Power up the WM8994 LDOs
<7>[ 8286.262854] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[ 8286.263684] lm8502_mod_brightness: set LED2 brightness (0) percent
<6>[ 8286.272113] PM: resume of devices complete after 177.935 msecs
<7>[ 8286.368702] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[ 8286.369121] lm8502_mod_brightness: set LED2 brightness (0) percent
<4>[ 8286.499084] Restarting tasks ... done.
<3>[ 8286.512957] wm8994-codec wm8994-codec: - MEOW wm8994_resume
<6>[ 8286.578464] suspend: exit suspend, ret = 0 (2015-04-22 17:19:59.807889185 UTC)
<6>[ 8286.584676] PM: Syncing filesystems ... skipped for target platform ... done.
<4>[ 8286.592021] Freezing user space processes ... (elapsed 0.02 seconds) done.
<4>[ 8286.616526] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
<4>[ 8286.636462] Suspending console(s) (use no_console_suspend to debug)
<3>[ 8286.656336] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
<3>[ 8286.656365] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
<3>[ 8286.656391] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
<3>[ 8286.681337] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
<3>[ 8286.681363] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
<3>[ 8286.681388] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
<7>[ 8286.681927] lm8502_mod_brightness: set LED2 brightness (0) percent
<7>[ 8286.682387] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[ 8286.693673] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[ 8286.694585] lm8502_mod_brightness: set LED2 brightness (0) percent
<3>[ 8286.698939] msm_wm8958_shutdown_power: codec power shutdown
<3>[ 8286.698972] wm8994_ldo_power: Power down the WM8994 LDOs
<3>[ 8286.699014] wm8994 4-001a: - MEOW wm8994_device_suspend
<4>[ 8286.707535] max8903b_suspend: suspend
<6>[ 8286.710017] PM: suspend of devices complete after 63.380 msecs
<6>[ 8286.711526] PM: late suspend of devices complete after 1.473 msecs
<4>[ 8286.711552] Disabling non-boot CPUs ...
<6>[ 8286.714761] cpufreq: cpu 1 is not active.
<6>[ 8286.732270] cpufreq: cpu 1 is not active.
<6>[ 8286.770923] wakeup wake lock: alarm
<4>[ 8286.789944] gic_show_resume_irq: 48 triggered
<4>[ 8286.789944] gic_show_resume_irq: 52 triggered
<4>[ 8286.789944] msm_gpio_show_resume_irq: irq 293/gpio 37 triggered wake
<4>[ 8286.790130] Enabling non-boot CPUs ...
<4>[ 8286.883088] CPU1 is up
<6>[ 8286.883585] PM: early resume of devices complete after 0.463 msecs
<4>[ 8286.950255] mmc1: queuing unknown CIS tuple 0x01 (3 bytes)
<4>[ 8286.951259] mmc1: queuing unknown CIS tuple 0x1a (5 bytes)
<4>[ 8286.951708] mmc1: queuing unknown CIS tuple 0x1b (8 bytes)
<4>[ 8286.951819] mmc1: queuing unknown CIS tuple 0x14 (0 bytes)
<4>[ 8286.952373] max8903b_resume: resume
<3>[ 8286.994666] pm_op(): platform_pm_resume+0x0/0x4c returns -22
<3>[ 8286.994698] PM: Device kgsl-2d1.1 failed to resume: error -22
<3>[ 8286.999338] msm_wm8958_setup_power: codec power setup
<3>[ 8286.999398] wm8994_ldo_power: Power up the WM8994 LDOs
<7>[ 8287.050352] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[ 8287.051141] lm8502_mod_brightness: set LED2 brightness (0) percent
<6>[ 8287.058130] PM: resume of devices complete after 174.165 msecs
<4>[ 8287.266668] Restarting tasks ... 
<7>[ 8287.267286] lm8502_mod_brightness: set LED1 brightness (0) percent
<4>[ 8287.285398] done.
<6>[ 8287.285571] suspend: exit suspend, ret = 0 (2015-04-22 17:20:14.728728148 UTC)
<7>[ 8287.290642] lm8502_mod_brightness: set LED2 brightness (0) percent
<3>[ 8287.432973] wm8994-codec wm8994-codec: - MEOW wm8994_resume
<6>[ 8287.574674] PM: Syncing filesystems ... skipped for target platform ... done.
<4>[ 8287.580781] Freezing user space processes ... (elapsed 0.02 seconds) done.
<4>[ 8287.606530] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
<4>[ 8287.626474] Suspending console(s) (use no_console_suspend to debug)
<3>[ 8287.646384] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
<3>[ 8287.646414] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
<3>[ 8287.646440] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
<3>[ 8287.671368] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
<3>[ 8287.671394] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
<3>[ 8287.671419] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
<7>[ 8287.671963] lm8502_mod_brightness: set LED2 brightness (0) percent
<7>[ 8287.672357] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[ 8287.683489] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[ 8287.684430] lm8502_mod_brightness: set LED2 brightness (0) percent
<3>[ 8287.688881] msm_wm8958_shutdown_power: codec power shutdown
<3>[ 8287.688914] wm8994_ldo_power: Power down the WM8994 LDOs
<3>[ 8287.688957] wm8994 4-001a: - MEOW wm8994_device_suspend
<4>[ 8287.697486] max8903b_suspend: suspend
<6>[ 8287.700013] PM: suspend of devices complete after 63.367 msecs
<6>[ 8287.701549] PM: late suspend of devices complete after 1.500 msecs
<4>[ 8287.701576] Disabling non-boot CPUs ...
<6>[ 8287.704768] cpufreq: cpu 1 is not active.
<6>[ 8287.722277] cpufreq: cpu 1 is not active.
<4>[ 8287.780426] gic_show_resume_irq: 48 triggered
<4>[ 8287.780426] gic_show_resume_irq: 52 triggered
<4>[ 8287.780426] msm_gpio_show_resume_irq: irq 293/gpio 37 triggered wake
<4>[ 8287.780612] Enabling non-boot CPUs ...
<3>[ 8287.872298] lsm303dlh_mag_sysfs 0-001e: read transfer error
<3>[ 8287.872328] lsm303dlh_mag_sysfs 0-001e: get_magnetometer_data failed
<4>[ 8287.933055] CPU1 is up
<6>[ 8287.933550] PM: early resume of devices complete after 0.463 msecs
<6>[ 8287.999448] wakeup wake lock: mmc_delayed_work
<4>[ 8288.000124] mmc1: queuing unknown CIS tuple 0x01 (3 bytes)
<4>[ 8288.001127] mmc1: queuing unknown CIS tuple 0x1a (5 bytes)
<4>[ 8288.001576] mmc1: queuing unknown CIS tuple 0x1b (8 bytes)
<4>[ 8288.001689] mmc1: queuing unknown CIS tuple 0x14 (0 bytes)
<4>[ 8288.002141] max8903b_resume: resume
<3>[ 8288.044720] pm_op(): platform_pm_resume+0x0/0x4c returns -22
<3>[ 8288.044752] PM: Device kgsl-2d1.1 failed to resume: error -22
<3>[ 8288.049431] msm_wm8958_setup_power: codec power setup
<3>[ 8288.049490] wm8994_ldo_power: Power up the WM8994 LDOs
<7>[ 8288.100497] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[ 8288.101286] lm8502_mod_brightness: set LED2 brightness (0) percent
<6>[ 8288.108294] PM: resume of devices complete after 174.362 msecs
<7>[ 8288.328715] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[ 8288.334873] lm8502_mod_brightness: set LED2 brightness (0) percent
<4>[ 8288.341033] Restarting tasks ... done.
<6>[ 8288.353642] suspend: exit suspend, ret = 0 (2015-04-22 17:20:30.746638520 UTC)
<3>[ 8288.492941] wm8994-codec wm8994-codec: - MEOW wm8994_resume
<6>[ 8288.629313] PM: Syncing filesystems ... skipped for target platform ... done.
<4>[ 8288.637925] Freezing user space processes ... (elapsed 0.02 seconds) done.
<4>[ 8288.666552] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
<4>[ 8288.686487] Suspending console(s) (use no_console_suspend to debug)
<3>[ 8288.706409] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
<3>[ 8288.706438] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
<3>[ 8288.706464] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
<3>[ 8288.731390] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
<3>[ 8288.731417] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
<3>[ 8288.731441] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
<7>[ 8288.731983] lm8502_mod_brightness: set LED2 brightness (0) percent
<7>[ 8288.732360] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[ 8288.743478] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[ 8288.744423] lm8502_mod_brightness: set LED2 brightness (0) percent
<3>[ 8288.748872] msm_wm8958_shutdown_power: codec power shutdown
<3>[ 8288.748905] wm8994_ldo_power: Power down the WM8994 LDOs
<3>[ 8288.748946] wm8994 4-001a: - MEOW wm8994_device_suspend
<4>[ 8288.757469] max8903b_suspend: suspend
<6>[ 8288.759995] PM: suspend of devices complete after 63.266 msecs
<6>[ 8288.761532] PM: late suspend of devices complete after 1.501 msecs
<4>[ 8288.761558] Disabling non-boot CPUs ...
<6>[ 8288.764774] cpufreq: cpu 1 is not active.
<6>[ 8288.782284] cpufreq: cpu 1 is not active.
<4>[ 8288.840727] gic_show_resume_irq: 48 triggered
<4>[ 8288.840727] gic_show_resume_irq: 52 triggered
<4>[ 8288.840727] msm_gpio_show_resume_irq: irq 293/gpio 37 triggered wake
<4>[ 8288.840911] Enabling non-boot CPUs ...
<3>[ 8288.982317] lsm303dlh_mag_sysfs 0-001e: read transfer error
<3>[ 8288.982345] lsm303dlh_mag_sysfs 0-001e: get_magnetometer_data failed
<4>[ 8288.993075] CPU1 is up
<6>[ 8288.993571] PM: early resume of devices complete after 0.462 msecs
<6>[ 8289.059464] wakeup wake lock: mmc_delayed_work
<4>[ 8289.060144] mmc1: queuing unknown CIS tuple 0x01 (3 bytes)
<4>[ 8289.061145] mmc1: queuing unknown CIS tuple 0x1a (5 bytes)
<4>[ 8289.061594] mmc1: queuing unknown CIS tuple 0x1b (8 bytes)
<4>[ 8289.061705] mmc1: queuing unknown CIS tuple 0x14 (0 bytes)
<4>[ 8289.062165] max8903b_resume: resume
<3>[ 8289.104705] pm_op(): platform_pm_resume+0x0/0x4c returns -22
<3>[ 8289.104737] PM: Device kgsl-2d1.1 failed to resume: error -22
<3>[ 8289.109406] msm_wm8958_setup_power: codec power setup
<3>[ 8289.109466] wm8994_ldo_power: Power up the WM8994 LDOs
<7>[ 8289.160396] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[ 8289.161184] lm8502_mod_brightness: set LED2 brightness (0) percent
<6>[ 8289.168185] PM: resume of devices complete after 174.229 msecs
<7>[ 8289.388621] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[ 8289.394780] lm8502_mod_brightness: set LED2 brightness (0) percent
<4>[ 8289.400937] Restarting tasks ... done.
<3>[ 8289.553017] wm8994-codec wm8994-codec: - MEOW wm8994_resume
<6>[ 8289.652842] suspend: exit suspend, ret = 0 (2015-04-22 17:20:46.985926222 UTC)
<6>[ 8289.688994] PM: Syncing filesystems ... skipped for target platform ... done.
<4>[ 8289.695334] Freezing user space processes ... (elapsed 0.02 seconds) done.
<4>[ 8289.724230] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
<4>[ 8289.744118] Suspending console(s) (use no_console_suspend to debug)
<3>[ 8289.762342] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
<3>[ 8289.762362] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
<3>[ 8289.762380] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
<3>[ 8289.777165] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
<3>[ 8289.777183] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
<3>[ 8289.777199] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
<7>[ 8289.777689] lm8502_mod_brightness: set LED2 brightness (0) percent
<7>[ 8289.778047] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[ 8289.786486] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[ 8289.787382] lm8502_mod_brightness: set LED2 brightness (0) percent
<3>[ 8289.791736] msm_wm8958_shutdown_power: codec power shutdown
<3>[ 8289.791761] wm8994_ldo_power: Power down the WM8994 LDOs
<3>[ 8289.791797] wm8994 4-001a: - MEOW wm8994_device_suspend
<4>[ 8289.802602] max8903b_suspend: suspend
<6>[ 8289.805421] PM: suspend of devices complete after 48.088 msecs
<6>[ 8289.806893] PM: late suspend of devices complete after 1.443 msecs
<4>[ 8289.806912] Disabling non-boot CPUs ...
<4>[ 8289.877090] gic_show_resume_irq: 48 triggered
<4>[ 8289.877090] gic_show_resume_irq: 52 triggered
<4>[ 8289.877090] msm_gpio_show_resume_irq: irq 293/gpio 37 triggered wake
<4>[ 8289.877212] Enabling non-boot CPUs ...
<4>[ 8289.972899] CPU1 is up
<6>[ 8289.973488] PM: early resume of devices complete after 0.561 msecs
<6>[ 8290.039352] wakeup wake lock: mmc_delayed_work
<4>[ 8290.039913] mmc1: queuing unknown CIS tuple 0x01 (3 bytes)
<4>[ 8290.040702] mmc1: queuing unknown CIS tuple 0x1a (5 bytes)
<4>[ 8290.041054] mmc1: queuing unknown CIS tuple 0x1b (8 bytes)
<4>[ 8290.041140] mmc1: queuing unknown CIS tuple 0x14 (0 bytes)
<4>[ 8290.041519] max8903b_resume: resume
<3>[ 8290.086701] pm_op(): platform_pm_resume+0x0/0x4c returns -22
<3>[ 8290.086721] PM: Device kgsl-2d1.1 failed to resume: error -22
<3>[ 8290.090955] msm_wm8958_setup_power: codec power setup
<3>[ 8290.091002] wm8994_ldo_power: Power up the WM8994 LDOs
<7>[ 8290.140727] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[ 8290.141451] lm8502_mod_brightness: set LED2 brightness (0) percent
<6>[ 8290.146846] PM: resume of devices complete after 173.026 msecs
<4>[ 8290.345970] Restarting tasks ... 
<7>[ 8290.356700] lm8502_mod_brightness: set LED1 brightness (0) percent
<4>[ 8290.362088] done.
<7>[ 8290.363714] lm8502_mod_brightness: set LED2 brightness (0) percent
<3>[ 8290.512981] wm8994-codec wm8994-codec: - MEOW wm8994_resume
<6>[ 8290.612708] suspend: exit suspend, ret = 0 (2015-04-22 17:21:02.966899555 UTC)
<6>[ 8290.648361] PM: Syncing filesystems ... skipped for target platform ... done.
<4>[ 8290.654648] Freezing user space processes ... (elapsed 0.03 seconds) done.
<4>[ 8290.686753] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
<4>[ 8290.706668] Suspending console(s) (use no_console_suspend to debug)
<3>[ 8290.727818] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
<3>[ 8290.727839] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
<3>[ 8290.727856] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
<3>[ 8290.742753] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
<3>[ 8290.742770] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
<3>[ 8290.742787] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
<7>[ 8290.743277] lm8502_mod_brightness: set LED2 brightness (0) percent
<7>[ 8290.743634] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[ 8290.752015] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[ 8290.752913] lm8502_mod_brightness: set LED2 brightness (0) percent
<3>[ 8290.757272] msm_wm8958_shutdown_power: codec power shutdown
<3>[ 8290.757298] wm8994_ldo_power: Power down the WM8994 LDOs
<3>[ 8290.757334] wm8994 4-001a: - MEOW wm8994_device_suspend
<4>[ 8290.768035] max8903b_suspend: suspend
<6>[ 8290.770311] PM: suspend of devices complete after 47.465 msecs
<6>[ 8290.771779] PM: late suspend of devices complete after 1.440 msecs
<4>[ 8290.771800] Disabling non-boot CPUs ...
<4>[ 8290.836223] gic_show_resume_irq: 48 triggered
<4>[ 8290.836223] gic_show_resume_irq: 52 triggered
<4>[ 8290.836223] msm_gpio_show_resume_irq: irq 293/gpio 37 triggered wake
<4>[ 8290.836345] Enabling non-boot CPUs ...
<4>[ 8290.932905] CPU1 is up
<6>[ 8290.933495] PM: early resume of devices complete after 0.561 msecs
<3>[ 8290.942321] lsm303dlh_mag_sysfs 0-001e: read transfer error
<3>[ 8290.942341] lsm303dlh_mag_sysfs 0-001e: get_magnetometer_data failed
<6>[ 8290.999490] wakeup wake lock: mmc_delayed_work
<4>[ 8291.000047] mmc1: queuing unknown CIS tuple 0x01 (3 bytes)
<4>[ 8291.000837] mmc1: queuing unknown CIS tuple 0x1a (5 bytes)
<4>[ 8291.001189] mmc1: queuing unknown CIS tuple 0x1b (8 bytes)
<4>[ 8291.001274] mmc1: queuing unknown CIS tuple 0x14 (0 bytes)
<4>[ 8291.001648] max8903b_resume: resume
<3>[ 8291.046691] pm_op(): platform_pm_resume+0x0/0x4c returns -22
<3>[ 8291.046712] PM: Device kgsl-2d1.1 failed to resume: error -22
<3>[ 8291.050966] msm_wm8958_setup_power: codec power setup
<3>[ 8291.051013] wm8994_ldo_power: Power up the WM8994 LDOs
<7>[ 8291.100732] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[ 8291.101455] lm8502_mod_brightness: set LED2 brightness (0) percent
<6>[ 8291.106827] PM: resume of devices complete after 173.000 msecs
<4>[ 8291.317017] Restarting tasks ... 
<7>[ 8291.326857] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[ 8291.333617] lm8502_mod_brightness: set LED2 brightness (0) percent
<4>[ 8291.336131] done.
<3>[ 8291.482941] wm8994-codec wm8994-codec: - MEOW wm8994_resume
<6>[ 8291.585305] suspend: exit suspend, ret = 0 (2015-04-22 17:21:18.979473333 UTC)
<6>[ 8291.620508] PM: Syncing filesystems ... skipped for target platform ... done.
<4>[ 8291.628929] Freezing user space processes ... (elapsed 0.02 seconds) done.
<4>[ 8291.656554] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
<4>[ 8291.676506] Suspending console(s) (use no_console_suspend to debug)
<3>[ 8291.690054] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
<3>[ 8291.690084] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
<3>[ 8291.690110] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
<3>[ 8291.715171] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
<3>[ 8291.715198] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
<3>[ 8291.715222] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
<7>[ 8291.715766] lm8502_mod_brightness: set LED2 brightness (0) percent
<7>[ 8291.716140] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[ 8291.727330] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[ 8291.728275] lm8502_mod_brightness: set LED2 brightness (0) percent
<3>[ 8291.732732] msm_wm8958_shutdown_power: codec power shutdown
<3>[ 8291.732765] wm8994_ldo_power: Power down the WM8994 LDOs
<3>[ 8291.732807] wm8994 4-001a: - MEOW wm8994_device_suspend
<4>[ 8291.741250] max8903b_suspend: suspend
<6>[ 8291.743774] PM: suspend of devices complete after 56.991 msecs
<6>[ 8291.745317] PM: late suspend of devices complete after 1.506 msecs
<4>[ 8291.745343] Disabling non-boot CPUs ...
<6>[ 8291.754781] cpufreq: cpu 1 is not active.
<6>[ 8291.764791] cpufreq: cpu 1 is not active.
<4>[ 8291.820258] gic_show_resume_irq: 48 triggered
<4>[ 8291.820258] gic_show_resume_irq: 52 triggered
<4>[ 8291.820258] msm_gpio_show_resume_irq: irq 293/gpio 37 triggered wake
<4>[ 8291.820443] Enabling non-boot CPUs ...
<3>[ 8291.852345] lsm303dlh_mag_sysfs 0-001e: read transfer error
<3>[ 8291.852374] lsm303dlh_mag_sysfs 0-001e: get_magnetometer_data failed
<4>[ 8291.913076] CPU1 is up
<6>[ 8291.913572] PM: early resume of devices complete after 0.462 msecs
<6>[ 8291.979633] wakeup wake lock: mmc_delayed_work
<4>[ 8291.980313] mmc1: queuing unknown CIS tuple 0x01 (3 bytes)
<4>[ 8291.981314] mmc1: queuing unknown CIS tuple 0x1a (5 bytes)
<4>[ 8291.981762] mmc1: queuing unknown CIS tuple 0x1b (8 bytes)
<4>[ 8291.981874] mmc1: queuing unknown CIS tuple 0x14 (0 bytes)
<4>[ 8291.982424] max8903b_resume: resume
<3>[ 8292.024733] pm_op(): platform_pm_resume+0x0/0x4c returns -22
<3>[ 8292.024764] PM: Device kgsl-2d1.1 failed to resume: error -22
<3>[ 8292.029283] msm_wm8958_setup_power: codec power setup
<3>[ 8292.029342] wm8994_ldo_power: Power up the WM8994 LDOs
<7>[ 8292.080297] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[ 8292.081086] lm8502_mod_brightness: set LED2 brightness (0) percent
<6>[ 8292.088060] PM: resume of devices complete after 174.105 msecs
<7>[ 8292.308494] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[ 8292.314651] lm8502_mod_brightness: set LED2 brightness (0) percent
<4>[ 8292.320812] Restarting tasks ... done.
<3>[ 8292.482964] wm8994-codec wm8994-codec: - MEOW wm8994_resume
<6>[ 8292.582808] suspend: exit suspend, ret = 0 (2015-04-22 17:21:33.996018518 UTC)
<6>[ 8292.621391] PM: Syncing filesystems ... skipped for target platform ... done.
<4>[ 8292.630707] Freezing user space processes ... (elapsed 0.02 seconds) done.
<4>[ 8292.656564] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
<4>[ 8292.676501] Suspending console(s) (use no_console_suspend to debug)
<3>[ 8292.690933] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
<3>[ 8292.690946] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
<3>[ 8292.690958] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
<3>[ 8292.700829] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
<3>[ 8292.700841] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
<3>[ 8292.700852] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
<7>[ 8292.701269] lm8502_mod_brightness: set LED2 brightness (0) percent
<7>[ 8292.701599] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[ 8292.706912] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[ 8292.707734] lm8502_mod_brightness: set LED2 brightness (0) percent
<3>[ 8292.711899] msm_wm8958_shutdown_power: codec power shutdown
<3>[ 8292.711916] wm8994_ldo_power: Power down the WM8994 LDOs
<3>[ 8292.711938] wm8994 4-001a: - MEOW wm8994_device_suspend
<4>[ 8292.718624] max8903b_suspend: suspend
<6>[ 8292.720484] PM: suspend of devices complete after 33.778 msecs
<6>[ 8292.721414] PM: late suspend of devices complete after 0.912 msecs
<4>[ 8292.721427] Disabling non-boot CPUs ...
<6>[ 8292.724805] cpufreq: cpu 1 is not active.
<4>[ 8292.838290] gic_show_resume_irq: 48 triggered
<4>[ 8292.838290] gic_show_resume_irq: 52 triggered
<4>[ 8292.838290] msm_gpio_show_resume_irq: irq 293/gpio 37 triggered wake
<4>[ 8292.838377] Enabling non-boot CPUs ...
<4>[ 8292.932675] CPU1 is up
<6>[ 8292.933041] PM: early resume of devices complete after 0.348 msecs
<3>[ 8292.962295] lsm303dlh_mag_sysfs 0-001e: read transfer error
<3>[ 8292.962308] lsm303dlh_mag_sysfs 0-001e: get_magnetometer_data failed
<6>[ 8292.999268] wakeup wake lock: mmc_delayed_work
<4>[ 8292.999657] mmc1: queuing unknown CIS tuple 0x01 (3 bytes)
<4>[ 8293.000185] mmc1: queuing unknown CIS tuple 0x1a (5 bytes)
<4>[ 8293.000420] mmc1: queuing unknown CIS tuple 0x1b (8 bytes)
<4>[ 8293.000476] mmc1: queuing unknown CIS tuple 0x14 (0 bytes)
<4>[ 8293.000738] max8903b_resume: resume
<3>[ 8293.034379] pm_op(): platform_pm_resume+0x0/0x4c returns -22
<3>[ 8293.034393] PM: Device kgsl-2d1.1 failed to resume: error -22
<3>[ 8293.038069] msm_wm8958_setup_power: codec power setup
<3>[ 8293.038102] wm8994_ldo_power: Power up the WM8994 LDOs
<7>[ 8293.086862] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[ 8293.087538] lm8502_mod_brightness: set LED2 brightness (0) percent
<6>[ 8293.091012] PM: resume of devices complete after 157.725 msecs
<4>[ 8293.303084] Restarting tasks ... 
<7>[ 8293.303528] lm8502_mod_brightness: set LED1 brightness (0) percent
<4>[ 8293.319835] done.
<6>[ 8293.320011] suspend: exit suspend, ret = 0 (2015-04-22 17:21:49.729722519 UTC)
<7>[ 8293.320390] lm8502_mod_brightness: set LED2 brightness (0) percent
<3>[ 8293.452998] wm8994-codec wm8994-codec: - MEOW wm8994_resume
<6>[ 8293.588816] PM: Syncing filesystems ... skipped for target platform ... done.
<4>[ 8293.595774] Freezing user space processes ... (elapsed 0.01 seconds) done.
<4>[ 8293.616599] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
<4>[ 8293.636502] Suspending console(s) (use no_console_suspend to debug)
<3>[ 8293.650713] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
<3>[ 8293.650725] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
<3>[ 8293.650734] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
<3>[ 8293.658793] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
<3>[ 8293.658802] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
<3>[ 8293.658811] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
<7>[ 8293.659215] lm8502_mod_brightness: set LED2 brightness (0) percent
<7>[ 8293.659538] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[ 8293.664085] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[ 8293.664894] lm8502_mod_brightness: set LED2 brightness (0) percent
<3>[ 8293.669024] msm_wm8958_shutdown_power: codec power shutdown
<3>[ 8293.669039] wm8994_ldo_power: Power down the WM8994 LDOs
<3>[ 8293.669060] wm8994 4-001a: - MEOW wm8994_device_suspend
<4>[ 8293.675316] max8903b_suspend: suspend
<6>[ 8293.677090] PM: suspend of devices complete after 30.416 msecs
<6>[ 8293.677943] PM: late suspend of devices complete after 0.836 msecs
<4>[ 8293.677955] Disabling non-boot CPUs ...
<6>[ 8293.684818] cpufreq: cpu 1 is not active.
<6>[ 8293.702299] cpufreq: cpu 1 is not active.
<6>[ 8293.722295] cpufreq: cpu 1 is not active.
<6>[ 8293.742306] cpufreq: cpu 1 is not active.
<4>[ 8293.754748] gic_show_resume_irq: 48 triggered
<4>[ 8293.754748] gic_show_resume_irq: 52 triggered
<4>[ 8293.754748] msm_gpio_show_resume_irq: irq 293/gpio 37 triggered wake
<4>[ 8293.754814] Enabling non-boot CPUs ...
<3>[ 8293.872291] lsm303dlh_mag_sysfs 0-001e: read transfer error
<3>[ 8293.872304] lsm303dlh_mag_sysfs 0-001e: get_magnetometer_data failed
<4>[ 8293.922588] CPU1 is up
<6>[ 8293.922940] PM: early resume of devices complete after 0.335 msecs
<6>[ 8293.989120] wakeup wake lock: mmc_delayed_work
<4>[ 8293.989477] mmc1: queuing unknown CIS tuple 0x01 (3 bytes)
<4>[ 8293.989951] mmc1: queuing unknown CIS tuple 0x1a (5 bytes)
<4>[ 8293.990162] mmc1: queuing unknown CIS tuple 0x1b (8 bytes)
<4>[ 8293.990212] mmc1: queuing unknown CIS tuple 0x14 (0 bytes)
<4>[ 8293.990451] max8903b_resume: resume
<3>[ 8294.024086] pm_op(): platform_pm_resume+0x0/0x4c returns -22
<3>[ 8294.024099] PM: Device kgsl-2d1.1 failed to resume: error -22
<3>[ 8294.027590] msm_wm8958_setup_power: codec power setup
<3>[ 8294.027620] wm8994_ldo_power: Power up the WM8994 LDOs
<7>[ 8294.076126] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[ 8294.076798] lm8502_mod_brightness: set LED2 brightness (0) percent
<6>[ 8294.079886] PM: resume of devices complete after 156.741 msecs
<4>[ 8294.304027] Restarting tasks ... 
<7>[ 8294.304454] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[ 8294.320538] lm8502_mod_brightness: set LED2 brightness (0) percent
<4>[ 8294.320593] done.
<3>[ 8294.462971] wm8994-codec wm8994-codec: - MEOW wm8994_resume
<6>[ 8294.564947] suspend: exit suspend, ret = 0 (2015-04-22 17:22:05.985718814 UTC)
<6>[ 8294.597815] PM: Syncing filesystems ... skipped for target platform ... done.
<4>[ 8294.604243] Freezing user space processes ... (elapsed 0.03 seconds) done.
<4>[ 8294.636751] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
<4>[ 8294.656704] Suspending console(s) (use no_console_suspend to debug)
<3>[ 8294.685720] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
<3>[ 8294.685750] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
<3>[ 8294.685777] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
<3>[ 8294.710840] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
<3>[ 8294.710869] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
<3>[ 8294.710895] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
<7>[ 8294.711486] lm8502_mod_brightness: set LED2 brightness (0) percent
<7>[ 8294.711875] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[ 8294.725073] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[ 8294.726065] lm8502_mod_brightness: set LED2 brightness (0) percent
<3>[ 8294.730628] msm_wm8958_shutdown_power: codec power shutdown
<3>[ 8294.730665] wm8994_ldo_power: Power down the WM8994 LDOs
<3>[ 8294.730715] wm8994 4-001a: - MEOW wm8994_device_suspend
<4>[ 8294.740899] max8903b_suspend: suspend
<6>[ 8294.744345] PM: suspend of devices complete after 70.792 msecs
<6>[ 8294.746213] PM: late suspend of devices complete after 1.828 msecs
<4>[ 8294.746242] Disabling non-boot CPUs ...
<4>[ 8294.818791] gic_show_resume_irq: 48 triggered
<4>[ 8294.818791] gic_show_resume_irq: 52 triggered
<4>[ 8294.818791] msm_gpio_show_resume_irq: irq 293/gpio 37 triggered wake
<4>[ 8294.818937] Enabling non-boot CPUs ...
<4>[ 8294.913236] CPU1 is up
<6>[ 8294.913832] PM: early resume of devices complete after 0.558 msecs
<6>[ 8294.980114] wakeup wake lock: mmc_delayed_work
<4>[ 8294.980878] mmc1: queuing unknown CIS tuple 0x01 (3 bytes)
<4>[ 8294.982014] mmc1: queuing unknown CIS tuple 0x1a (5 bytes)
<3>[ 8294.982369] lsm303dlh_mag_sysfs 0-001e: read transfer error
<3>[ 8294.982396] lsm303dlh_mag_sysfs 0-001e: get_magnetometer_data failed
<4>[ 8294.982722] mmc1: queuing unknown CIS tuple 0x1b (8 bytes)
<4>[ 8294.982852] mmc1: queuing unknown CIS tuple 0x14 (0 bytes)
<4>[ 8294.983377] max8903b_resume: resume
<3>[ 8295.026002] pm_op(): platform_pm_resume+0x0/0x4c returns -22
<3>[ 8295.026036] PM: Device kgsl-2d1.1 failed to resume: error -22
<3>[ 8295.031077] msm_wm8958_setup_power: codec power setup
<3>[ 8295.031146] wm8994_ldo_power: Power up the WM8994 LDOs
<7>[ 8295.082936] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[ 8295.083765] lm8502_mod_brightness: set LED2 brightness (0) percent
<6>[ 8295.092208] PM: resume of devices complete after 177.982 msecs
<4>[ 8295.306655] Restarting tasks ... 
<7>[ 8295.309249] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[ 8295.316486] lm8502_mod_brightness: set LED2 brightness (0) percent
<4>[ 8295.320323] done.
<6>[ 8295.324132] suspend: exit suspend, ret = 0 (2015-04-22 17:22:21.733457630 UTC)
<3>[ 8295.462998] wm8994-codec wm8994-codec: - MEOW wm8994_resume
<6>[ 8295.607185] PM: Syncing filesystems ... skipped for target platform ... done.
<4>[ 8295.613493] Freezing user space processes ... (elapsed 0.03 seconds) done.
<4>[ 8295.646957] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
<4>[ 8295.666809] Suspending console(s) (use no_console_suspend to debug)
<3>[ 8295.696921] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
<3>[ 8295.696954] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
<3>[ 8295.696983] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
<3>[ 8295.722104] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
<3>[ 8295.722133] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
<3>[ 8295.722160] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
<7>[ 8295.722882] lm8502_mod_brightness: set LED2 brightness (0) percent
<7>[ 8295.723278] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[ 8295.737114] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[ 8295.738126] lm8502_mod_brightness: set LED2 brightness (0) percent
<3>[ 8295.742768] msm_wm8958_shutdown_power: codec power shutdown
<3>[ 8295.742809] wm8994_ldo_power: Power down the WM8994 LDOs
<3>[ 8295.742864] wm8994 4-001a: - MEOW wm8994_device_suspend
<4>[ 8295.754977] max8903b_suspend: suspend
<6>[ 8295.758480] PM: suspend of devices complete after 74.165 msecs
<6>[ 8295.760757] PM: late suspend of devices complete after 2.232 msecs
<4>[ 8295.760791] Disabling non-boot CPUs ...
<4>[ 8295.828842] gic_show_resume_irq: 48 triggered
<4>[ 8295.828842] gic_show_resume_irq: 52 triggered
<4>[ 8295.828842] msm_gpio_show_resume_irq: irq 344/gpio 88 triggered wake
<4>[ 8295.828842] pm8058_show_resume_irq:468 triggered
<4>[ 8295.829029] Enabling non-boot CPUs ...
<3>[ 8295.892388] lsm303dlh_mag_sysfs 0-001e: read transfer error
<3>[ 8295.892425] lsm303dlh_mag_sysfs 0-001e: get_magnetometer_data failed
<4>[ 8295.923321] CPU1 is up
<6>[ 8295.924177] PM: early resume of devices complete after 0.814 msecs
<6>[ 8295.924561] wakeup wake lock: alarm_rtc
<4>[ 8295.991218] mmc1: queuing unknown CIS tuple 0x01 (3 bytes)
<4>[ 8295.992556] mmc1: queuing unknown CIS tuple 0x1a (5 bytes)
<4>[ 8295.993108] mmc1: queuing unknown CIS tuple 0x1b (8 bytes)
<4>[ 8295.993241] mmc1: queuing unknown CIS tuple 0x14 (0 bytes)
<4>[ 8295.993801] max8903b_resume: resume
<3>[ 8296.037250] pm_op(): platform_pm_resume+0x0/0x4c returns -22
<3>[ 8296.037285] PM: Device kgsl-2d1.1 failed to resume: error -22
<3>[ 8296.042133] msm_wm8958_setup_power: codec power setup
<3>[ 8296.042207] wm8994_ldo_power: Power up the WM8994 LDOs
<7>[ 8296.093857] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[ 8296.094692] lm8502_mod_brightness: set LED2 brightness (0) percent
<6>[ 8296.103208] PM: resume of devices complete after 178.289 msecs
<4>[ 8296.322105] Restarting tasks ... 
<7>[ 8296.325961] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[ 8296.331663] lm8502_mod_brightness: set LED2 brightness (0) percent
<4>[ 8296.338105] done.
<6>[ 8296.339439] suspend: exit suspend, ret = 0 (2015-04-22 17:22:24.737885333 UTC)
<3>[ 8296.482962] wm8994-codec wm8994-codec: - MEOW wm8994_resume
<6>[ 8296.774393] PM: Syncing filesystems ... skipped for target platform ... done.
<4>[ 8296.780936] Freezing user space processes ... (elapsed 0.03 seconds) done.
<4>[ 8296.814456] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
<4>[ 8296.834346] Suspending console(s) (use no_console_suspend to debug)
<3>[ 8296.864441] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
<3>[ 8296.864474] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
<3>[ 8296.864502] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
<3>[ 8296.889567] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
<3>[ 8296.889596] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
<3>[ 8296.889623] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
<7>[ 8296.890241] lm8502_mod_brightness: set LED2 brightness (0) percent
<7>[ 8296.890640] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[ 8296.904469] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[ 8296.905445] lm8502_mod_brightness: set LED2 brightness (0) percent
<3>[ 8296.909956] msm_wm8958_shutdown_power: codec power shutdown
<3>[ 8296.909997] wm8994_ldo_power: Power down the WM8994 LDOs
<3>[ 8296.910052] wm8994 4-001a: - MEOW wm8994_device_suspend
<4>[ 8296.922570] max8903b_suspend: suspend
<6>[ 8296.926034] PM: suspend of devices complete after 74.159 msecs
<6>[ 8296.928280] PM: late suspend of devices complete after 2.201 msecs
<4>[ 8296.928311] Disabling non-boot CPUs ...
<4>[ 8296.998602] gic_show_resume_irq: 48 triggered
<4>[ 8296.998602] gic_show_resume_irq: 52 triggered
<4>[ 8296.998602] msm_gpio_show_resume_irq: irq 293/gpio 37 triggered wake
<4>[ 8296.998786] Enabling non-boot CPUs ...
<4>[ 8297.093351] CPU1 is up
<6>[ 8297.094209] PM: early resume of devices complete after 0.814 msecs
<6>[ 8297.160476] wakeup wake lock: mmc_delayed_work
<4>[ 8297.161307] mmc1: queuing unknown CIS tuple 0x01 (3 bytes)
<4>[ 8297.162643] mmc1: queuing unknown CIS tuple 0x1a (5 bytes)
<4>[ 8297.163194] mmc1: queuing unknown CIS tuple 0x1b (8 bytes)
<4>[ 8297.163328] mmc1: queuing unknown CIS tuple 0x14 (0 bytes)
<4>[ 8297.163890] max8903b_resume: resume
<3>[ 8297.207252] pm_op(): platform_pm_resume+0x0/0x4c returns -22
<3>[ 8297.207287] PM: Device kgsl-2d1.1 failed to resume: error -22
<3>[ 8297.212118] msm_wm8958_setup_power: codec power setup
<3>[ 8297.212187] wm8994_ldo_power: Power up the WM8994 LDOs
<7>[ 8297.263613] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[ 8297.264422] lm8502_mod_brightness: set LED2 brightness (0) percent
<6>[ 8297.272984] PM: resume of devices complete after 178.200 msecs
<7>[ 8297.368611] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[ 8297.369029] lm8502_mod_brightness: set LED2 brightness (0) percent
<4>[ 8297.487724] Restarting tasks ... done.
<3>[ 8297.513026] wm8994-codec wm8994-codec: - MEOW wm8994_resume
<6>[ 8297.567232] suspend: exit suspend, ret = 0 (2015-04-22 17:22:40.795917037 UTC)
<6>[ 8297.569949] PM: Syncing filesystems ... skipped for target platform ... done.
<4>[ 8297.580781] Freezing user space processes ... (elapsed 0.03 seconds) done.
<4>[ 8297.614091] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
<4>[ 8297.634032] Suspending console(s) (use no_console_suspend to debug)
<3>[ 8297.648322] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
<3>[ 8297.648334] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
<3>[ 8297.648343] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
<3>[ 8297.656437] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
<3>[ 8297.656446] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
<3>[ 8297.656456] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
<7>[ 8297.656856] lm8502_mod_brightness: set LED2 brightness (0) percent
<7>[ 8297.657180] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[ 8297.661681] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[ 8297.662475] lm8502_mod_brightness: set LED2 brightness (0) percent
<3>[ 8297.666581] msm_wm8958_shutdown_power: codec power shutdown
<3>[ 8297.666596] wm8994_ldo_power: Power down the WM8994 LDOs
<3>[ 8297.666618] wm8994 4-001a: - MEOW wm8994_device_suspend
<4>[ 8297.670510] max8903b_suspend: suspend
<6>[ 8297.672363] PM: suspend of devices complete after 28.075 msecs
<6>[ 8297.673215] PM: late suspend of devices complete after 0.836 msecs
<4>[ 8297.673227] Disabling non-boot CPUs ...
<4>[ 8297.734732] gic_show_resume_irq: 48 triggered
<4>[ 8297.734732] gic_show_resume_irq: 52 triggered
<4>[ 8297.734732] msm_gpio_show_resume_irq: irq 293/gpio 37 triggered wake
<4>[ 8297.734797] Enabling non-boot CPUs ...
<4>[ 8297.832652] CPU1 is up
<6>[ 8297.833004] PM: early resume of devices complete after 0.336 msecs
<3>[ 8297.882310] lsm303dlh_mag_sysfs 0-001e: read transfer error
<3>[ 8297.882321] lsm303dlh_mag_sysfs 0-001e: get_magnetometer_data failed
<6>[ 8297.899246] wakeup wake lock: mmc_delayed_work
<4>[ 8297.899599] mmc1: queuing unknown CIS tuple 0x01 (3 bytes)
<4>[ 8297.900073] mmc1: queuing unknown CIS tuple 0x1a (5 bytes)
<4>[ 8297.900284] mmc1: queuing unknown CIS tuple 0x1b (8 bytes)
<4>[ 8297.900335] mmc1: queuing unknown CIS tuple 0x14 (0 bytes)
<4>[ 8297.900574] max8903b_resume: resume
<3>[ 8297.934368] pm_op(): platform_pm_resume+0x0/0x4c returns -22
<3>[ 8297.934380] PM: Device kgsl-2d1.1 failed to resume: error -22
<3>[ 8297.937939] msm_wm8958_setup_power: codec power setup
<3>[ 8297.937969] wm8994_ldo_power: Power up the WM8994 LDOs
<7>[ 8297.986517] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[ 8297.987181] lm8502_mod_brightness: set LED2 brightness (0) percent
<6>[ 8297.990241] PM: resume of devices complete after 157.036 msecs
<7>[ 8298.118866] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[ 8298.119207] lm8502_mod_brightness: set LED2 brightness (0) percent
<4>[ 8298.209346] Restarting tasks ... done.
<6>[ 8298.227039] suspend: exit suspend, ret = 0 (2015-04-22 17:22:55.737440148 UTC)
<3>[ 8298.252923] wm8994-codec wm8994-codec: - MEOW wm8994_resume
<6>[ 8298.314331] PM: Syncing filesystems ... skipped for target platform ... done.
<4>[ 8298.323070] Freezing user space processes ... (elapsed 0.02 seconds) done.
<4>[ 8298.346592] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
<4>[ 8298.366532] Suspending console(s) (use no_console_suspend to debug)
<3>[ 8298.381902] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
<3>[ 8298.381928] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
<3>[ 8298.381951] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
<3>[ 8298.404260] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
<3>[ 8298.404284] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
<3>[ 8298.404306] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
<7>[ 8298.404825] lm8502_mod_brightness: set LED2 brightness (0) percent
<7>[ 8298.405193] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[ 8298.415134] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[ 8298.416056] lm8502_mod_brightness: set LED2 brightness (0) percent
<3>[ 8298.420454] msm_wm8958_shutdown_power: codec power shutdown
<3>[ 8298.420484] wm8994_ldo_power: Power down the WM8994 LDOs
<3>[ 8298.420523] wm8994 4-001a: - MEOW wm8994_device_suspend
<4>[ 8298.426106] max8903b_suspend: suspend
<6>[ 8298.428536] PM: suspend of devices complete after 51.815 msecs
<6>[ 8298.429958] PM: late suspend of devices complete after 1.389 msecs
<4>[ 8298.429982] Disabling non-boot CPUs ...
<6>[ 8298.434826] cpufreq: cpu 1 is not active.
<6>[ 8298.452338] cpufreq: cpu 1 is not active.
<4>[ 8298.509538] gic_show_resume_irq: 48 triggered
<4>[ 8298.509538] gic_show_resume_irq: 52 triggered
<4>[ 8298.509538] msm_gpio_show_resume_irq: irq 293/gpio 37 triggered wake
<4>[ 8298.509714] Enabling non-boot CPUs ...
<3>[ 8298.592371] lsm303dlh_mag_sysfs 0-001e: read transfer error
<3>[ 8298.592397] lsm303dlh_mag_sysfs 0-001e: get_magnetometer_data failed
<4>[ 8298.663044] CPU1 is up
<6>[ 8298.663516] PM: early resume of devices complete after 0.442 msecs
<6>[ 8298.729432] wakeup wake lock: mmc_delayed_work
<4>[ 8298.730056] mmc1: queuing unknown CIS tuple 0x01 (3 bytes)
<4>[ 8298.730971] mmc1: queuing unknown CIS tuple 0x1a (5 bytes)
<4>[ 8298.731381] mmc1: queuing unknown CIS tuple 0x1b (8 bytes)
<4>[ 8298.731482] mmc1: queuing unknown CIS tuple 0x14 (0 bytes)
<4>[ 8298.731900] max8903b_resume: resume
<3>[ 8298.774669] pm_op(): platform_pm_resume+0x0/0x4c returns -22
<3>[ 8298.774697] PM: Device kgsl-2d1.1 failed to resume: error -22
<3>[ 8298.779207] msm_wm8958_setup_power: codec power setup
<3>[ 8298.779266] wm8994_ldo_power: Power up the WM8994 LDOs
<7>[ 8298.829696] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[ 8298.830463] lm8502_mod_brightness: set LED2 brightness (0) percent
<6>[ 8298.836857] PM: resume of devices complete after 172.986 msecs
<4>[ 8299.057112] Restarting tasks ... 
<7>[ 8299.057682] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[ 8299.076643] lm8502_mod_brightness: set LED2 brightness (0) percent
<4>[ 8299.080289] done.
<3>[ 8299.213108] wm8994-codec wm8994-codec: - MEOW wm8994_resume
<6>[ 8299.317234] suspend: exit suspend, ret = 0 (2015-04-22 17:23:11.981548889 UTC)
<6>[ 8299.350629] PM: Syncing filesystems ... skipped for target platform ... done.
<4>[ 8299.356944] Freezing user space processes ... (elapsed 0.01 seconds) done.
<4>[ 8299.376603] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
<4>[ 8299.396534] Suspending console(s) (use no_console_suspend to debug)
<3>[ 8299.412166] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
<3>[ 8299.412196] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
<3>[ 8299.412222] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
<3>[ 8299.437464] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
<3>[ 8299.437490] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
<3>[ 8299.437516] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
<7>[ 8299.438053] lm8502_mod_brightness: set LED2 brightness (0) percent
<7>[ 8299.438429] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[ 8299.449461] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[ 8299.450405] lm8502_mod_brightness: set LED2 brightness (0) percent
<3>[ 8299.454865] msm_wm8958_shutdown_power: codec power shutdown
<3>[ 8299.454898] wm8994_ldo_power: Power down the WM8994 LDOs
<3>[ 8299.454942] wm8994 4-001a: - MEOW wm8994_device_suspend
<4>[ 8299.463366] max8903b_suspend: suspend
<6>[ 8299.465889] PM: suspend of devices complete after 59.168 msecs
<6>[ 8299.467425] PM: late suspend of devices complete after 1.500 msecs
<4>[ 8299.467450] Disabling non-boot CPUs ...
<6>[ 8299.474825] cpufreq: cpu 1 is not active.
<6>[ 8299.484836] cpufreq: cpu 1 is not active.
<4>[ 8299.541256] gic_show_resume_irq: 48 triggered
<4>[ 8299.541256] gic_show_resume_irq: 52 triggered
<4>[ 8299.541256] msm_gpio_show_resume_irq: irq 293/gpio 37 triggered wake
<4>[ 8299.541441] Enabling non-boot CPUs ...
<4>[ 8299.633163] CPU1 is up
<6>[ 8299.633660] PM: early resume of devices complete after 0.463 msecs
<6>[ 8299.699674] wakeup wake lock: mmc_delayed_work
<4>[ 8299.700353] mmc1: queuing unknown CIS tuple 0x01 (3 bytes)
<4>[ 8299.701355] mmc1: queuing unknown CIS tuple 0x1a (5 bytes)
<4>[ 8299.701803] mmc1: queuing unknown CIS tuple 0x1b (8 bytes)
<4>[ 8299.701914] mmc1: queuing unknown CIS tuple 0x14 (0 bytes)
<4>[ 8299.702466] max8903b_resume: resume
<3>[ 8299.712393] lsm303dlh_mag_sysfs 0-001e: read transfer error
<3>[ 8299.712420] lsm303dlh_mag_sysfs 0-001e: get_magnetometer_data failed
<3>[ 8299.744738] pm_op(): platform_pm_resume+0x0/0x4c returns -22
<3>[ 8299.744769] PM: Device kgsl-2d1.1 failed to resume: error -22
<3>[ 8299.749437] msm_wm8958_setup_power: codec power setup
<3>[ 8299.749501] wm8994_ldo_power: Power up the WM8994 LDOs
<7>[ 8299.800436] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[ 8299.801226] lm8502_mod_brightness: set LED2 brightness (0) percent
<6>[ 8299.808202] PM: resume of devices complete after 174.156 msecs
<7>[ 8300.028640] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[ 8300.034796] lm8502_mod_brightness: set LED2 brightness (0) percent
<4>[ 8300.040954] Restarting tasks ... done.
<6>[ 8300.048155] suspend: exit suspend, ret = 0 (2015-04-22 17:23:27.741233927 UTC)
<3>[ 8300.182979] wm8994-codec wm8994-codec: - MEOW wm8994_resume
<6>[ 8300.318111] PM: Syncing filesystems ... skipped for target platform ... done.
<4>[ 8300.324396] Freezing user space processes ... (elapsed 0.03 seconds) done.
<4>[ 8300.356786] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
<4>[ 8300.376744] Suspending console(s) (use no_console_suspend to debug)
<3>[ 8300.405631] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
<3>[ 8300.405662] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
<3>[ 8300.405690] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
<3>[ 8300.430719] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
<3>[ 8300.430747] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
<3>[ 8300.430773] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
<7>[ 8300.431368] lm8502_mod_brightness: set LED2 brightness (0) percent
<7>[ 8300.431759] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[ 8300.445137] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[ 8300.446125] lm8502_mod_brightness: set LED2 brightness (0) percent
<3>[ 8300.450687] msm_wm8958_shutdown_power: codec power shutdown
<3>[ 8300.450724] wm8994_ldo_power: Power down the WM8994 LDOs
<3>[ 8300.450770] wm8994 4-001a: - MEOW wm8994_device_suspend
<4>[ 8300.460934] max8903b_suspend: suspend
<6>[ 8300.464382] PM: suspend of devices complete after 70.933 msecs
<6>[ 8300.466254] PM: late suspend of devices complete after 1.831 msecs
<4>[ 8300.466282] Disabling non-boot CPUs ...
<4>[ 8300.538245] gic_show_resume_irq: 48 triggered
<4>[ 8300.538245] gic_show_resume_irq: 52 triggered
<4>[ 8300.538245] msm_gpio_show_resume_irq: irq 293/gpio 37 triggered wake
<4>[ 8300.538392] Enabling non-boot CPUs ...
<3>[ 8300.612396] lsm303dlh_mag_sysfs 0-001e: read transfer error
<3>[ 8300.612428] lsm303dlh_mag_sysfs 0-001e: get_magnetometer_data failed
<4>[ 8300.633264] CPU1 is up
<6>[ 8300.633861] PM: early resume of devices complete after 0.559 msecs
<6>[ 8300.700323] wakeup wake lock: mmc_delayed_work
<4>[ 8300.701089] mmc1: queuing unknown CIS tuple 0x01 (3 bytes)
<4>[ 8300.702223] mmc1: queuing unknown CIS tuple 0x1a (5 bytes)
<4>[ 8300.702835] mmc1: queuing unknown CIS tuple 0x1b (8 bytes)
<4>[ 8300.702963] mmc1: queuing unknown CIS tuple 0x14 (0 bytes)
<4>[ 8300.703489] max8903b_resume: resume
<3>[ 8300.745967] pm_op(): platform_pm_resume+0x0/0x4c returns -22
<3>[ 8300.746002] PM: Device kgsl-2d1.1 failed to resume: error -22
<3>[ 8300.750843] msm_wm8958_setup_power: codec power setup
<3>[ 8300.750913] wm8994_ldo_power: Power up the WM8994 LDOs
<7>[ 8300.802839] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[ 8300.803646] lm8502_mod_brightness: set LED2 brightness (0) percent
<6>[ 8300.812091] PM: resume of devices complete after 177.838 msecs
<4>[ 8301.026806] Restarting tasks ... 
<7>[ 8301.040723] lm8502_mod_brightness: set LED1 brightness (0) percent
<4>[ 8301.045214] done.
<6>[ 8301.047926] suspend: exit suspend, ret = 0 (2015-04-22 17:23:43.737362519 UTC)
<7>[ 8301.052520] lm8502_mod_brightness: set LED2 brightness (0) percent
<3>[ 8301.193040] wm8994-codec wm8994-codec: - MEOW wm8994_resume
<6>[ 8301.329985] PM: Syncing filesystems ... skipped for target platform ... done.
<4>[ 8301.338881] Freezing user space processes ... (elapsed 0.02 seconds) done.
<4>[ 8301.366610] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
<4>[ 8301.386547] Suspending console(s) (use no_console_suspend to debug)
<3>[ 8301.402254] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
<3>[ 8301.402284] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
<3>[ 8301.402408] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
<3>[ 8301.427378] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
<3>[ 8301.427405] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
<3>[ 8301.427430] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
<7>[ 8301.427970] lm8502_mod_brightness: set LED2 brightness (0) percent
<7>[ 8301.428346] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[ 8301.439468] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[ 8301.440407] lm8502_mod_brightness: set LED2 brightness (0) percent
<3>[ 8301.444847] msm_wm8958_shutdown_power: codec power shutdown
<3>[ 8301.444880] wm8994_ldo_power: Power down the WM8994 LDOs
<3>[ 8301.444924] wm8994 4-001a: - MEOW wm8994_device_suspend
<4>[ 8301.453358] max8903b_suspend: suspend
<6>[ 8301.455880] PM: suspend of devices complete after 59.045 msecs
<6>[ 8301.457421] PM: late suspend of devices complete after 1.504 msecs
<4>[ 8301.457447] Disabling non-boot CPUs ...
<6>[ 8301.464837] cpufreq: cpu 1 is not active.
<6>[ 8301.474848] cpufreq: cpu 1 is not active.
<4>[ 8301.530348] gic_show_resume_irq: 48 triggered
<4>[ 8301.530348] gic_show_resume_irq: 52 triggered
<4>[ 8301.530348] msm_gpio_show_resume_irq: irq 293/gpio 37 triggered wake
<4>[ 8301.530533] Enabling non-boot CPUs ...
<4>[ 8301.623161] CPU1 is up
<6>[ 8301.623658] PM: early resume of devices complete after 0.463 msecs
<6>[ 8301.689710] wakeup wake lock: mmc_delayed_work
<4>[ 8301.690391] mmc1: queuing unknown CIS tuple 0x01 (3 bytes)
<4>[ 8301.691394] mmc1: queuing unknown CIS tuple 0x1a (5 bytes)
<4>[ 8301.691843] mmc1: queuing unknown CIS tuple 0x1b (8 bytes)
<4>[ 8301.691955] mmc1: queuing unknown CIS tuple 0x14 (0 bytes)
<4>[ 8301.692492] max8903b_resume: resume
<3>[ 8301.734746] pm_op(): platform_pm_resume+0x0/0x4c returns -22
<3>[ 8301.734778] PM: Device kgsl-2d1.1 failed to resume: error -22
<3>[ 8301.739286] msm_wm8958_setup_power: codec power setup
<3>[ 8301.739345] wm8994_ldo_power: Power up the WM8994 LDOs
<7>[ 8301.790327] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[ 8301.791116] lm8502_mod_brightness: set LED2 brightness (0) percent
<6>[ 8301.798126] PM: resume of devices complete after 174.081 msecs
<4>[ 8302.007784] Restarting tasks ... 
<7>[ 8302.008392] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[ 8302.029420] lm8502_mod_brightness: set LED2 brightness (0) percent
<4>[ 8302.032204] done.
<6>[ 8302.036632] suspend: exit suspend, ret = 0 (2015-04-22 17:23:58.739781926 UTC)
<3>[ 8302.172997] wm8994-codec wm8994-codec: - MEOW wm8994_resume
<6>[ 8302.305855] PM: Syncing filesystems ... skipped for target platform ... done.
<4>[ 8302.312142] Freezing user space processes ... (elapsed 0.02 seconds) done.
<4>[ 8302.336818] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
<4>[ 8302.356747] Suspending console(s) (use no_console_suspend to debug)
<3>[ 8302.385698] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
<3>[ 8302.385730] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
<3>[ 8302.385757] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
<3>[ 8302.410781] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
<3>[ 8302.410809] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
<3>[ 8302.410835] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
<7>[ 8302.411430] lm8502_mod_brightness: set LED2 brightness (0) percent
<7>[ 8302.411819] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[ 8302.425045] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[ 8302.426033] lm8502_mod_brightness: set LED2 brightness (0) percent
<3>[ 8302.430601] msm_wm8958_shutdown_power: codec power shutdown
<3>[ 8302.430638] wm8994_ldo_power: Power down the WM8994 LDOs
<3>[ 8302.430685] wm8994 4-001a: - MEOW wm8994_device_suspend
<4>[ 8302.440847] max8903b_suspend: suspend
<6>[ 8302.444293] PM: suspend of devices complete after 70.813 msecs
<6>[ 8302.446161] PM: late suspend of devices complete after 1.827 msecs
<4>[ 8302.446190] Disabling non-boot CPUs ...
<4>[ 8302.517173] gic_show_resume_irq: 48 triggered
<4>[ 8302.517173] gic_show_resume_irq: 52 triggered
<4>[ 8302.517173] msm_gpio_show_resume_irq: irq 293/gpio 37 triggered wake
<4>[ 8302.517321] Enabling non-boot CPUs ...
<3>[ 8302.602404] lsm303dlh_mag_sysfs 0-001e: read transfer error
<3>[ 8302.602435] lsm303dlh_mag_sysfs 0-001e: get_magnetometer_data failed
<4>[ 8302.613280] CPU1 is up
<6>[ 8302.613876] PM: early resume of devices complete after 0.559 msecs
<6>[ 8302.680355] wakeup wake lock: mmc_delayed_work
<4>[ 8302.681121] mmc1: queuing unknown CIS tuple 0x01 (3 bytes)
<4>[ 8302.682255] mmc1: queuing unknown CIS tuple 0x1a (5 bytes)
<4>[ 8302.682866] mmc1: queuing unknown CIS tuple 0x1b (8 bytes)
<4>[ 8302.682996] mmc1: queuing unknown CIS tuple 0x14 (0 bytes)
<4>[ 8302.683520] max8903b_resume: resume
<3>[ 8302.726001] pm_op(): platform_pm_resume+0x0/0x4c returns -22
<3>[ 8302.726035] PM: Device kgsl-2d1.1 failed to resume: error -22
<3>[ 8302.730873] msm_wm8958_setup_power: codec power setup
<3>[ 8302.730948] wm8994_ldo_power: Power up the WM8994 LDOs
<7>[ 8302.782840] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[ 8302.783646] lm8502_mod_brightness: set LED2 brightness (0) percent
<6>[ 8302.792132] PM: resume of devices complete after 177.861 msecs
<4>[ 8303.006738] Restarting tasks ... 
<7>[ 8303.019572] lm8502_mod_brightness: set LED1 brightness (0) percent
<4>[ 8303.024386] done.
<6>[ 8303.026776] suspend: exit suspend, ret = 0 (2015-04-22 17:24:14.736216444 UTC)
<7>[ 8303.030863] lm8502_mod_brightness: set LED2 brightness (0) percent
<3>[ 8303.173051] wm8994-codec wm8994-codec: - MEOW wm8994_resume
<6>[ 8303.318765] PM: Syncing filesystems ... skipped for target platform ... done.
<4>[ 8303.324964] Freezing user space processes ... (elapsed 0.02 seconds) done.
<4>[ 8303.346635] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
<4>[ 8303.366558] Suspending console(s) (use no_console_suspend to debug)
<3>[ 8303.386469] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
<3>[ 8303.386498] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
<3>[ 8303.386524] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
<3>[ 8303.411468] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
<3>[ 8303.411495] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
<3>[ 8303.411519] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
<7>[ 8303.412064] lm8502_mod_brightness: set LED2 brightness (0) percent
<7>[ 8303.412441] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[ 8303.423765] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[ 8303.424699] lm8502_mod_brightness: set LED2 brightness (0) percent
<3>[ 8303.429133] msm_wm8958_shutdown_power: codec power shutdown
<3>[ 8303.429166] wm8994_ldo_power: Power down the WM8994 LDOs
<3>[ 8303.429208] wm8994 4-001a: - MEOW wm8994_device_suspend
<4>[ 8303.437638] max8903b_suspend: suspend
<6>[ 8303.440171] PM: suspend of devices complete after 63.418 msecs
<6>[ 8303.441709] PM: late suspend of devices complete after 1.502 msecs
<4>[ 8303.441736] Disabling non-boot CPUs ...
<6>[ 8303.444873] cpufreq: cpu 1 is not active.
<4>[ 8303.560062] gic_show_resume_irq: 48 triggered
<4>[ 8303.560062] gic_show_resume_irq: 52 triggered
<4>[ 8303.560062] msm_gpio_show_resume_irq: irq 293/gpio 37 triggered wake
<4>[ 8303.560246] Enabling non-boot CPUs ...
<3>[ 8303.712354] lsm303dlh_mag_sysfs 0-001e: read transfer error
<3>[ 8303.712368] lsm303dlh_mag_sysfs 0-001e: get_magnetometer_data failed
<4>[ 8303.743141] CPU1 is up
<6>[ 8303.743638] PM: early resume of devices complete after 0.463 msecs
<6>[ 8303.809565] wakeup wake lock: mmc_delayed_work
<4>[ 8303.810242] mmc1: queuing unknown CIS tuple 0x01 (3 bytes)
<4>[ 8303.811244] mmc1: queuing unknown CIS tuple 0x1a (5 bytes)
<4>[ 8303.811691] mmc1: queuing unknown CIS tuple 0x1b (8 bytes)
<4>[ 8303.811803] mmc1: queuing unknown CIS tuple 0x14 (0 bytes)
<4>[ 8303.812256] max8903b_resume: resume
<3>[ 8303.854770] pm_op(): platform_pm_resume+0x0/0x4c returns -22
<3>[ 8303.854802] PM: Device kgsl-2d1.1 failed to resume: error -22
<3>[ 8303.859470] msm_wm8958_setup_power: codec power setup
<3>[ 8303.859534] wm8994_ldo_power: Power up the WM8994 LDOs
<7>[ 8303.910333] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[ 8303.911119] lm8502_mod_brightness: set LED2 brightness (0) percent
<6>[ 8303.918159] PM: resume of devices complete after 174.140 msecs
<4>[ 8304.135327] Restarting tasks ... 
<7>[ 8304.135922] lm8502_mod_brightness: set LED1 brightness (0) percent
<4>[ 8304.153578] done.
<6>[ 8304.153742] suspend: exit suspend, ret = 0 (2015-04-22 17:24:30.736853927 UTC)
<7>[ 8304.157216] lm8502_mod_brightness: set LED2 brightness (0) percent
<3>[ 8304.303064] wm8994-codec wm8994-codec: - MEOW wm8994_resume
<6>[ 8304.438092] PM: Syncing filesystems ... skipped for target platform ... done.
<4>[ 8304.444381] Freezing user space processes ... (elapsed 0.03 seconds) done.
<4>[ 8304.476803] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
<4>[ 8304.496741] Suspending console(s) (use no_console_suspend to debug)
<3>[ 8304.525602] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
<3>[ 8304.525634] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
<3>[ 8304.525661] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
<3>[ 8304.550784] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
<3>[ 8304.550813] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
<3>[ 8304.550839] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
<7>[ 8304.551430] lm8502_mod_brightness: set LED2 brightness (0) percent
<7>[ 8304.551820] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[ 8304.565171] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[ 8304.566150] lm8502_mod_brightness: set LED2 brightness (0) percent
<3>[ 8304.570694] msm_wm8958_shutdown_power: codec power shutdown
<3>[ 8304.570731] wm8994_ldo_power: Power down the WM8994 LDOs
<3>[ 8304.570778] wm8994 4-001a: - MEOW wm8994_device_suspend
<4>[ 8304.580934] max8903b_suspend: suspend
<6>[ 8304.584384] PM: suspend of devices complete after 70.954 msecs
<6>[ 8304.586251] PM: late suspend of devices complete after 1.827 msecs
<4>[ 8304.586280] Disabling non-boot CPUs ...
<4>[ 8304.658125] gic_show_resume_irq: 48 triggered
<4>[ 8304.658125] gic_show_resume_irq: 52 triggered
<4>[ 8304.658125] msm_gpio_show_resume_irq: irq 293/gpio 37 triggered wake
<4>[ 8304.658272] Enabling non-boot CPUs ...
<4>[ 8304.753296] CPU1 is up
<6>[ 8304.753892] PM: early resume of devices complete after 0.558 msecs
<6>[ 8304.820371] wakeup wake lock: mmc_delayed_work
<4>[ 8304.821137] mmc1: queuing unknown CIS tuple 0x01 (3 bytes)
<4>[ 8304.822273] mmc1: queuing unknown CIS tuple 0x1a (5 bytes)
<3>[ 8304.822443] lsm303dlh_mag_sysfs 0-001e: read transfer error
<3>[ 8304.822473] lsm303dlh_mag_sysfs 0-001e: get_magnetometer_data failed
<4>[ 8304.822892] mmc1: queuing unknown CIS tuple 0x1b (8 bytes)
<4>[ 8304.823022] mmc1: queuing unknown CIS tuple 0x14 (0 bytes)
<4>[ 8304.823546] max8903b_resume: resume
<3>[ 8304.866016] pm_op(): platform_pm_resume+0x0/0x4c returns -22
<3>[ 8304.866050] PM: Device kgsl-2d1.1 failed to resume: error -22
<3>[ 8304.871079] msm_wm8958_setup_power: codec power setup
<3>[ 8304.871148] wm8994_ldo_power: Power up the WM8994 LDOs
<7>[ 8304.922829] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[ 8304.923652] lm8502_mod_brightness: set LED2 brightness (0) percent
<6>[ 8304.932089] PM: resume of devices complete after 177.804 msecs
<4>[ 8305.146543] Restarting tasks ... 
<7>[ 8305.160433] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[ 8305.168052] lm8502_mod_brightness: set LED2 brightness (0) percent
<4>[ 8305.174862] done.
<3>[ 8305.313062] wm8994-codec wm8994-codec: - MEOW wm8994_resume
<6>[ 8305.417706] suspend: exit suspend, ret = 0 (2015-04-22 17:24:46.987144445 UTC)
<6>[ 8305.459856] PM: Syncing filesystems ... skipped for target platform ... done.
<4>[ 8305.466058] Freezing user space processes ... (elapsed 0.01 seconds) done.
<4>[ 8305.486648] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
<4>[ 8305.506572] Suspending console(s) (use no_console_suspend to debug)
<3>[ 8305.522237] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
<3>[ 8305.522266] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
<3>[ 8305.522292] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
<3>[ 8305.547337] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
<3>[ 8305.547364] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
<3>[ 8305.547389] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
<7>[ 8305.547931] lm8502_mod_brightness: set LED2 brightness (0) percent
<7>[ 8305.548307] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[ 8305.559334] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[ 8305.560280] lm8502_mod_brightness: set LED2 brightness (0) percent
<3>[ 8305.564738] msm_wm8958_shutdown_power: codec power shutdown
<3>[ 8305.564771] wm8994_ldo_power: Power down the WM8994 LDOs
<3>[ 8305.564815] wm8994 4-001a: - MEOW wm8994_device_suspend
<4>[ 8305.573342] max8903b_suspend: suspend
<6>[ 8305.575862] PM: suspend of devices complete after 59.066 msecs
<6>[ 8305.577399] PM: late suspend of devices complete after 1.501 msecs
<4>[ 8305.577425] Disabling non-boot CPUs ...
<6>[ 8305.584869] cpufreq: cpu 1 is not active.
<6>[ 8305.594876] cpufreq: cpu 1 is not active.
<4>[ 8305.650204] gic_show_resume_irq: 48 triggered
<4>[ 8305.650204] gic_show_resume_irq: 52 triggered
<4>[ 8305.650204] msm_gpio_show_resume_irq: irq 296/gpio 40 triggered wake
<4>[ 8305.650394] Enabling non-boot CPUs ...
<3>[ 8305.732406] lsm303dlh_mag_sysfs 0-001e: read transfer error
<3>[ 8305.732436] lsm303dlh_mag_sysfs 0-001e: get_magnetometer_data failed
<4>[ 8305.743173] CPU1 is up
<6>[ 8305.743669] PM: early resume of devices complete after 0.462 msecs
<6>[ 8305.809716] wakeup wake lock: mmc_delayed_work
<4>[ 8305.810393] mmc1: queuing unknown CIS tuple 0x01 (3 bytes)
<4>[ 8305.811395] mmc1: queuing unknown CIS tuple 0x1a (5 bytes)
<4>[ 8305.811843] mmc1: queuing unknown CIS tuple 0x1b (8 bytes)
<4>[ 8305.811955] mmc1: queuing unknown CIS tuple 0x14 (0 bytes)
<4>[ 8305.812505] max8903b_resume: resume
<3>[ 8305.854785] pm_op(): platform_pm_resume+0x0/0x4c returns -22
<3>[ 8305.854817] PM: Device kgsl-2d1.1 failed to resume: error -22
<4>[ 8305.855826] gpio_keys: forcing GPIO 40 to state 1
<6>[ 8305.855850] gpio-keys: core navi button pressed
<3>[ 8305.859626] msm_wm8958_setup_power: codec power setup
<3>[ 8305.859690] wm8994_ldo_power: Power up the WM8994 LDOs
<6>[ 8305.872372] gpio-keys: core navi button released
<7>[ 8305.910698] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[ 8305.911496] lm8502_mod_brightness: set LED2 brightness (0) percent
<6>[ 8305.918437] PM: resume of devices complete after 174.428 msecs
<7>[ 8306.152476] lm8502_mod_brightness: set LED1 brightness (0) percent
<7>[ 8306.158648] lm8502_mod_brightness: set LED2 brightness (0) percent
<4>[ 8306.164847] Restarting tasks ... done.
<6>[ 8306.177220] suspend: exit suspend, ret = 0 (2015-04-22 17:24:53.760063556 UTC)
<6>[ 8306.185122] request_suspend_state: wakeup (3->0) at 8306172798206 (2015-04-22 17:24:53.767958519 UTC)
<6>[ 8306.185748] lsm303dlh_acc_sysfs: hw init start
<6>[ 8306.201616] lsm303dlh_acc_sysfs: hw init done
<3>[ 8306.218926] lcdc_lg_panel_power: l10 ENABLE
<3>[ 8306.333063] wm8994-codec wm8994-codec: - MEOW wm8994_resume
<6>[ 8307.664692] msm_device_put:device speaker_stereo_rx set 0
<6>[ 8307.664822] msm_device_put:device speaker_stereo_rx set 1
<3>[ 8307.674298] msm_device_put:device freq =48000
<6>[ 8307.693666] aif1 codec rates are already configured, just return
<6>[ 8310.997166] msm_device_put:device speaker_stereo_rx set 0
<6>[ 8313.891522] msm_device_put:device speaker_stereo_rx set 0
<6>[ 8313.891573] msm_device_put:device speaker_stereo_rx set 1
<3>[ 8313.900995] msm_device_put:device freq =48000
<6>[ 8313.913900] aif1 codec rates are already configured, just return
<6>[ 8322.315222] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
<6>[ 8353.122619] cfg80211: Calling CRDA to update world regulatory domain
<6>[ 8547.601884] cfg80211: Calling CRDA for country: US
<3>[ 8712.682648] qtaguid: iface_stat: stat_update() lo not found
<3>[ 8712.682713] qtaguid: iface_stat: stat_update() lo not found
<3>[ 8715.792713] qtaguid: iface_stat: stat_update() lo not found
<3>[ 8715.792801] qtaguid: iface_stat: stat_update() lo not found
<7>[ 8720.012387] wlan0: no IPv6 routers present
<3>[ 8720.152691] qtaguid: iface_stat: stat_update() lo not found
<3>[ 8720.152767] qtaguid: iface_stat: stat_update() lo not found
<3>[ 8720.162857] qtaguid: iface_stat: stat_update() lo not found
<6>[ 8720.334424] cfg80211: Calling CRDA for country: US
<6>[ 8916.927282] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
<6>[ 8947.617842] cfg80211: Calling CRDA to update world regulatory domain
<6>[ 9016.234877] cfg80211: Calling CRDA to update world regulatory domain
<3>[ 9110.732560] qtaguid: iface_stat: stat_update() lo not found
<3>[ 9110.732605] qtaguid: iface_stat: stat_update() lo not found
<7>[ 9114.652364] wlan0: no IPv6 routers present
<3>[ 9115.742621] qtaguid: iface_stat: stat_update() lo not found
<3>[ 9115.742655] qtaguid: iface_stat: stat_update() lo not found
<3>[ 9120.705224] qtaguid: iface_stat: stat_update() lo not found
<3>[ 9120.705293] qtaguid: iface_stat: stat_update() lo not found
<3>[ 9120.705344] qtaguid: iface_stat: stat_update() lo not found
<3>[ 9125.704562] qtaguid: iface_stat: stat_update() lo not found
<3>[ 9125.704607] qtaguid: iface_stat: stat_update() lo not found
<3>[ 9125.714702] qtaguid: iface_stat: stat_update() lo not found
<3>[ 9130.713222] qtaguid: iface_stat: stat_update() lo not found
<3>[ 9130.713258] qtaguid: iface_stat: stat_update() lo not found
<3>[ 9130.713280] qtaguid: iface_stat: stat_update() lo not found
<3>[ 9135.715246] qtaguid: iface_stat: stat_update() lo not found
<3>[ 9135.715340] qtaguid: iface_stat: stat_update() lo not found
<3>[ 9135.725483] qtaguid: iface_stat: stat_update() lo not found
<3>[ 9140.725079] qtaguid: iface_stat: stat_update() lo not found
<3>[ 9140.725126] qtaguid: iface_stat: stat_update() lo not found
<3>[ 9140.735212] qtaguid: iface_stat: stat_update() lo not found
<3>[ 9144.625239] qtaguid: iface_stat: stat_update() lo not found
<3>[ 9144.625330] qtaguid: iface_stat: stat_update() lo not found
<3>[ 9144.635424] qtaguid: iface_stat: stat_update() lo not found
<3>[ 9149.625181] qtaguid: iface_stat: stat_update() lo not found
<3>[ 9149.625272] qtaguid: iface_stat: stat_update() lo not found
<3>[ 9154.625044] qtaguid: iface_stat: stat_update() lo not found
<3>[ 9154.625076] qtaguid: iface_stat: stat_update() lo not found
<3>[ 9159.635065] qtaguid: iface_stat: stat_update() lo not found
<3>[ 9159.635112] qtaguid: iface_stat: stat_update() lo not found
<3>[ 9159.645200] qtaguid: iface_stat: stat_update() lo not found
<3>[ 9164.425229] qtaguid: iface_stat: stat_update() lo not found
<3>[ 9164.425321] qtaguid: iface_stat: stat_update() lo not found
<3>[ 9164.435435] qtaguid: iface_stat: stat_update() lo not found
<3>[ 9169.433224] qtaguid: iface_stat: stat_update() lo not found
<3>[ 9169.433270] qtaguid: iface_stat: stat_update() lo not found
<3>[ 9169.443369] qtaguid: iface_stat: stat_update() lo not found
<3>[ 9174.435319] qtaguid: iface_stat: stat_update() lo not found
<3>[ 9174.435409] qtaguid: iface_stat: stat_update() lo not found
<3>[ 9174.445528] qtaguid: iface_stat: stat_update() lo not found
<3>[ 9179.435119] qtaguid: iface_stat: stat_update() lo not found
<3>[ 9179.435162] qtaguid: iface_stat: stat_update() lo not found
<3>[ 9179.435194] qtaguid: iface_stat: stat_update() lo not found
<3>[ 9184.445274] qtaguid: iface_stat: stat_update() lo not found
<3>[ 9184.445367] qtaguid: iface_stat: stat_update() lo not found
<3>[ 9184.455511] qtaguid: iface_stat: stat_update() lo not found
<3>[ 9189.443112] qtaguid: iface_stat: stat_update() lo not found
<3>[ 9189.443159] qtaguid: iface_stat: stat_update() lo not found
<3>[ 9189.453275] qtaguid: iface_stat: stat_update() lo not found
<3>[ 9194.445045] qtaguid: iface_stat: stat_update() lo not found
<3>[ 9194.445077] qtaguid: iface_stat: stat_update() lo not found
<3>[ 9194.445097] qtaguid: iface_stat: stat_update() lo not found
<3>[ 9199.455011] qtaguid: iface_stat: stat_update() lo not found
<3>[ 9216.165049] qtaguid: iface_stat: stat_update() lo not found
<3>[ 9216.165094] qtaguid: iface_stat: stat_update() lo not found
<3>[ 9221.175074] qtaguid: iface_stat: stat_update() lo not found
<3>[ 9221.175121] qtaguid: iface_stat: stat_update() lo not found
<3>[ 9226.175039] qtaguid: iface_stat: stat_update() lo not found
<3>[ 9226.175086] qtaguid: iface_stat: stat_update() lo not found
<3>[ 9231.185061] qtaguid: iface_stat: stat_update() lo not found
<3>[ 9231.185108] qtaguid: iface_stat: stat_update() lo not found
<3>[ 9236.185042] qtaguid: iface_stat: stat_update() lo not found
<3>[ 9236.185088] qtaguid: iface_stat: stat_update() lo not found
<6>[ 9236.499872] cfg80211: Calling CRDA to update world regulatory domain
<6>[12008.116219] msm_otg_resume: usb exited from low power mode
<6>[12008.351676] gadget_event: source=detected mA=0
<4>[12009.419682] UDC-CHG (2-1-1-2): usb_multi_chg_detect (540) : 10W Adaptor(2000mA)!
<6>[12009.463365] a6_update_connected_ps: ac=1 usb=0 dock=0
<6>[12009.463402] max8903b_current_setup: CURRENT_750(4), 900(5), 1000(6), 1400(7), 2000MA(9): 9
<6>[12009.475946] gadget_event: source=charger mA=2000
<6>[12009.713236] msm_otg_suspend: usb in low power mode
<6>[12583.389770] a6_update_connected_ps: ac=1 usb=0 dock=0
<6>[12583.996346] msm_otg_resume: usb exited from low power mode
<6>[12584.033746] a6_update_connected_ps: ac=0 usb=0 dock=0
<6>[12584.033759] max8903b_current_setup: ### CHARGE_DISABLE
<6>[12584.033772] gadget_event: source=none mA=0
<6>[12584.263215] msm_otg_suspend: usb in low power mode
<6>[12621.945049] msm_otg_resume: usb exited from low power mode
<6>[12622.172795] gadget_event: source=detected mA=0
<4>[12623.242440] UDC-CHG (2-1-1-2): usb_multi_chg_detect (540) : 10W Adaptor(2000mA)!
<6>[12623.283803] a6_update_connected_ps: ac=1 usb=0 dock=0
<6>[12623.283820] max8903b_current_setup: CURRENT_750(4), 900(5), 1000(6), 1400(7), 2000MA(9): 9
<6>[12623.283844] gadget_event: source=charger mA=2000
<6>[12623.513297] msm_otg_suspend: usb in low power mode
<6>[13010.469842] a6_update_connected_ps: ac=1 usb=0 dock=0
<6>[13011.039891] msm_otg_resume: usb exited from low power mode
<6>[13011.083720] a6_update_connected_ps: ac=0 usb=0 dock=0
<6>[13011.083748] max8903b_current_setup: ### CHARGE_DISABLE
<6>[13011.093179] gadget_event: source=none mA=0
<6>[13011.323300] msm_otg_suspend: usb in low power mode
<6>[13023.483365] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
<6>[13028.384685] msm_otg_resume: usb exited from low power mode
<6>[13028.612670] gadget_event: source=detected mA=0
<4>[13029.688973] UDC-CHG (2-1-1-2): usb_multi_chg_detect (540) : 10W Adaptor(2000mA)!
<6>[13029.730586] a6_update_connected_ps: ac=1 usb=0 dock=0
<6>[13029.730617] max8903b_current_setup: CURRENT_750(4), 900(5), 1000(6), 1400(7), 2000MA(9): 9
<6>[13029.744946] gadget_event: source=charger mA=2000
<6>[13029.983208] msm_otg_suspend: usb in low power mode
<6>[13038.051200] cfg80211: Calling CRDA to update world regulatory domain
<6>[13169.132293] cfg80211: Calling CRDA to update world regulatory domain
<6>[13201.271689] cfg80211: Calling CRDA to update world regulatory domain
<6>[13310.044898] cfg80211: Calling CRDA to update world regulatory domain
<6>[17115.037478] cfg80211: Calling CRDA to update world regulatory domain
<6>[17194.927833] cfg80211: Calling CRDA to update world regulatory domain
<6>[17255.352928] cfg80211: Calling CRDA to update world regulatory domain
<6>[17419.392135] cfg80211: Calling CRDA to update world regulatory domain
<3>[17579.995073] qtaguid: iface_stat: stat_update() lo not found
<3>[17579.995119] qtaguid: iface_stat: stat_update() lo not found
<7>[17584.362357] wlan0: no IPv6 routers present
<3>[17585.005206] qtaguid: iface_stat: stat_update() lo not found
<3>[17585.005289] qtaguid: iface_stat: stat_update() lo not found
<3>[17589.962649] qtaguid: iface_stat: stat_update() lo not found
<3>[17589.962749] qtaguid: iface_stat: stat_update() lo not found
<3>[17589.972948] qtaguid: iface_stat: stat_update() lo not found
<3>[17594.962599] qtaguid: iface_stat: stat_update() lo not found
<3>[17594.962633] qtaguid: iface_stat: stat_update() lo not found
<3>[17594.962653] qtaguid: iface_stat: stat_update() lo not found
<3>[17599.972884] qtaguid: iface_stat: stat_update() lo not found
<3>[17599.972927] qtaguid: iface_stat: stat_update() lo not found
<3>[17599.972947] qtaguid: iface_stat: stat_update() lo not found
<6>[17602.642709] cfg80211: Calling CRDA to update world regulatory domain
<6>[17683.060607] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
<6>[17694.291386] cfg80211: Calling CRDA to update world regulatory domain
<6>[17809.132487] cfg80211: Calling CRDA to update world regulatory domain
<3>[17899.255087] qtaguid: iface_stat: stat_update() lo not found
<3>[17899.255134] qtaguid: iface_stat: stat_update() lo not found
<7>[17903.231670] wlan0: no IPv6 routers present
<3>[17904.265254] qtaguid: iface_stat: stat_update() lo not found
<3>[17904.265340] qtaguid: iface_stat: stat_update() lo not found
<3>[17909.162550] qtaguid: iface_stat: stat_update() lo not found
<3>[17909.162582] qtaguid: iface_stat: stat_update() lo not found
<3>[17909.162601] qtaguid: iface_stat: stat_update() lo not found
<3>[17914.172540] qtaguid: iface_stat: stat_update() lo not found
<3>[17914.172585] qtaguid: iface_stat: stat_update() lo not found
<3>[17914.182814] qtaguid: iface_stat: stat_update() lo not found
<3>[17919.173581] qtaguid: iface_stat: stat_update() lo not found
<3>[17919.173697] qtaguid: iface_stat: stat_update() lo not found
<3>[17919.183854] qtaguid: iface_stat: stat_update() lo not found
<3>[17924.182552] qtaguid: iface_stat: stat_update() lo not found
<3>[17924.182599] qtaguid: iface_stat: stat_update() lo not found
<3>[17924.192749] qtaguid: iface_stat: stat_update() lo not found
<3>[17929.182672] qtaguid: iface_stat: stat_update() lo not found
<3>[17929.182709] qtaguid: iface_stat: stat_update() lo not found
<3>[17929.182729] qtaguid: iface_stat: stat_update() lo not found
<3>[17934.192626] qtaguid: iface_stat: stat_update() lo not found
<3>[17934.192671] qtaguid: iface_stat: stat_update() lo not found
<3>[17934.202752] qtaguid: iface_stat: stat_update() lo not found
<3>[17939.202591] qtaguid: iface_stat: stat_update() lo not found
<3>[17939.202624] qtaguid: iface_stat: stat_update() lo not found
<3>[17939.202643] qtaguid: iface_stat: stat_update() lo not found
<3>[17944.192579] qtaguid: iface_stat: stat_update() lo not found
<3>[17944.192626] qtaguid: iface_stat: stat_update() lo not found
<3>[17944.202757] qtaguid: iface_stat: stat_update() lo not found
<3>[17951.442533] qtaguid: iface_stat: stat_update() lo not found
<3>[17951.442578] qtaguid: iface_stat: stat_update() lo not found
<3>[17951.452707] qtaguid: iface_stat: stat_update() lo not found
<3>[17956.442576] qtaguid: iface_stat: stat_update() lo not found
<3>[17956.442625] qtaguid: iface_stat: stat_update() lo not found
<3>[17961.452514] qtaguid: iface_stat: stat_update() lo not found
<3>[17961.452559] qtaguid: iface_stat: stat_update() lo not found
<3>[17966.452603] qtaguid: iface_stat: stat_update() lo not found
<3>[17966.452654] qtaguid: iface_stat: stat_update() lo not found
<3>[17969.482567] qtaguid: iface_stat: stat_update() lo not found
<3>[17969.482614] qtaguid: iface_stat: stat_update() lo not found
<3>[17973.565041] qtaguid: iface_stat: stat_update() lo not found
<3>[17973.565087] qtaguid: iface_stat: stat_update() lo not found
<3>[17978.575282] qtaguid: iface_stat: stat_update() lo not found
<3>[17978.575367] qtaguid: iface_stat: stat_update() lo not found
<3>[17983.575057] qtaguid: iface_stat: stat_update() lo not found
<3>[17983.575102] qtaguid: iface_stat: stat_update() lo not found
<3>[17988.585223] qtaguid: iface_stat: stat_update() lo not found
<3>[17988.585315] qtaguid: iface_stat: stat_update() lo not found
<3>[17994.502531] qtaguid: iface_stat: stat_update() lo not found
<6>[18006.708528] cfg80211: Calling CRDA to update world regulatory domain
<6>[18214.053374] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
<3>[18221.042762] qtaguid: iface_stat: stat_update() lo not found
<3>[18221.042816] qtaguid: iface_stat: stat_update() lo not found
<7>[18225.524859] wlan0: no IPv6 routers present
<3>[18226.042629] qtaguid: iface_stat: stat_update() lo not found
<3>[18226.042678] qtaguid: iface_stat: stat_update() lo not found
<3>[18231.052561] qtaguid: iface_stat: stat_update() lo not found
<3>[18231.052607] qtaguid: iface_stat: stat_update() lo not found
<3>[18231.062724] qtaguid: iface_stat: stat_update() lo not found
<6>[18235.982892] cfg80211: Calling CRDA to update world regulatory domain
<3>[18236.052763] qtaguid: iface_stat: stat_update() lo not found
<3>[18236.052823] qtaguid: iface_stat: stat_update() lo not found
<3>[18236.063000] qtaguid: iface_stat: stat_update() lo not found
<6>[18305.527223] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
<6>[18321.430181] cfg80211: Calling CRDA to update world regulatory domain
<6>[18368.014845] cfg80211: Calling CRDA to update world regulatory domain
<3>[18529.272672] qtaguid: iface_stat: stat_update() lo not found
<3>[18529.272741] qtaguid: iface_stat: stat_update() lo not found
<7>[18533.432355] wlan0: no IPv6 routers present
<3>[18534.268586] qtaguid: iface_stat: stat_update() lo not found
<3>[18534.268643] qtaguid: iface_stat: stat_update() lo not found
<3>[18539.205088] qtaguid: iface_stat: stat_update() lo not found
<3>[18539.205138] qtaguid: iface_stat: stat_update() lo not found
<3>[18539.215227] qtaguid: iface_stat: stat_update() lo not found
<3>[18544.205031] qtaguid: iface_stat: stat_update() lo not found
<3>[18544.205076] qtaguid: iface_stat: stat_update() lo not found
<3>[18544.215163] qtaguid: iface_stat: stat_update() lo not found
<3>[18549.215280] qtaguid: iface_stat: stat_update() lo not found
<3>[18549.215351] qtaguid: iface_stat: stat_update() lo not found
<3>[18549.225516] qtaguid: iface_stat: stat_update() lo not found
<3>[18554.215074] qtaguid: iface_stat: stat_update() lo not found
<3>[18554.215121] qtaguid: iface_stat: stat_update() lo not found
<3>[18554.225219] qtaguid: iface_stat: stat_update() lo not found
<3>[18559.225234] qtaguid: iface_stat: stat_update() lo not found
<3>[18559.225320] qtaguid: iface_stat: stat_update() lo not found
<3>[18559.235443] qtaguid: iface_stat: stat_update() lo not found
<3>[18564.225249] qtaguid: iface_stat: stat_update() lo not found
<3>[18564.225318] qtaguid: iface_stat: stat_update() lo not found
<3>[18564.225370] qtaguid: iface_stat: stat_update() lo not found
<3>[18569.222779] qtaguid: iface_stat: stat_update() lo not found
<3>[18574.235202] qtaguid: iface_stat: stat_update() lo not found
<3>[18574.235294] qtaguid: iface_stat: stat_update() lo not found
<6>[18577.456491] cfg80211: Calling CRDA to update world regulatory domain
<6>[18593.155307] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
<6>[18691.612450] cfg80211: Calling CRDA to update world regulatory domain
<3>[18779.415124] qtaguid: iface_stat: stat_update() lo not found
<3>[18779.415175] qtaguid: iface_stat: stat_update() lo not found
<7>[18783.474923] wlan0: no IPv6 routers present
<3>[18784.415124] qtaguid: iface_stat: stat_update() lo not found
<3>[18784.415187] qtaguid: iface_stat: stat_update() lo not found
<3>[18789.372610] qtaguid: iface_stat: stat_update() lo not found
<3>[18789.372659] qtaguid: iface_stat: stat_update() lo not found
<3>[18789.382820] qtaguid: iface_stat: stat_update() lo not found
<3>[18794.372528] qtaguid: iface_stat: stat_update() lo not found
<3>[18794.372573] qtaguid: iface_stat: stat_update() lo not found
<3>[18794.382817] qtaguid: iface_stat: stat_update() lo not found
<3>[18799.382598] qtaguid: iface_stat: stat_update() lo not found
<3>[18799.382632] qtaguid: iface_stat: stat_update() lo not found
<3>[18799.382651] qtaguid: iface_stat: stat_update() lo not found
<3>[18804.382642] qtaguid: iface_stat: stat_update() lo not found
<3>[18804.382690] qtaguid: iface_stat: stat_update() lo not found
<3>[18804.392809] qtaguid: iface_stat: stat_update() lo not found
<6>[18808.601073] cfg80211: Calling CRDA to update world regulatory domain
<6>[18857.802270] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
<3>[18864.875155] qtaguid: iface_stat: stat_update() lo not found
<3>[18864.875191] qtaguid: iface_stat: stat_update() lo not found
<7>[18869.712381] wlan0: no IPv6 routers present
<3>[18869.875076] qtaguid: iface_stat: stat_update() lo not found
<3>[18869.875122] qtaguid: iface_stat: stat_update() lo not found
<3>[18874.785051] qtaguid: iface_stat: stat_update() lo not found
<3>[18874.785098] qtaguid: iface_stat: stat_update() lo not found
<3>[18874.795194] qtaguid: iface_stat: stat_update() lo not found
<3>[18879.785050] qtaguid: iface_stat: stat_update() lo not found
<3>[18879.785096] qtaguid: iface_stat: stat_update() lo not found
<3>[18879.795187] qtaguid: iface_stat: stat_update() lo not found
<3>[18884.795210] qtaguid: iface_stat: stat_update() lo not found
<3>[18884.795301] qtaguid: iface_stat: stat_update() lo not found
<3>[18884.805417] qtaguid: iface_stat: stat_update() lo not found
<3>[18889.795068] qtaguid: iface_stat: stat_update() lo not found
<3>[18889.795115] qtaguid: iface_stat: stat_update() lo not found
<3>[18889.805204] qtaguid: iface_stat: stat_update() lo not found
<3>[18894.805128] qtaguid: iface_stat: stat_update() lo not found
<3>[18894.805174] qtaguid: iface_stat: stat_update() lo not found
<3>[18894.815263] qtaguid: iface_stat: stat_update() lo not found
<3>[18899.802732] qtaguid: iface_stat: stat_update() lo not found
<3>[18899.802778] qtaguid: iface_stat: stat_update() lo not found
<3>[18899.812880] qtaguid: iface_stat: stat_update() lo not found
<3>[18904.805219] qtaguid: iface_stat: stat_update() lo not found
<3>[18904.805310] qtaguid: iface_stat: stat_update() lo not found
<3>[18904.815416] qtaguid: iface_stat: stat_update() lo not found
<3>[18909.815075] qtaguid: iface_stat: stat_update() lo not found
<3>[18909.815121] qtaguid: iface_stat: stat_update() lo not found
<3>[18909.825263] qtaguid: iface_stat: stat_update() lo not found
<3>[18916.442595] qtaguid: iface_stat: stat_update() lo not found
<3>[18916.442645] qtaguid: iface_stat: stat_update() lo not found
<3>[18916.452806] qtaguid: iface_stat: stat_update() lo not found
<3>[18921.442574] qtaguid: iface_stat: stat_update() lo not found
<3>[18921.442621] qtaguid: iface_stat: stat_update() lo not found
<3>[18926.452518] qtaguid: iface_stat: stat_update() lo not found
<3>[18926.452562] qtaguid: iface_stat: stat_update() lo not found
<3>[18931.452581] qtaguid: iface_stat: stat_update() lo not found
<3>[18931.452614] qtaguid: iface_stat: stat_update() lo not found
<3>[18936.462520] qtaguid: iface_stat: stat_update() lo not found
<3>[18936.462565] qtaguid: iface_stat: stat_update() lo not found
<3>[18944.275024] qtaguid: iface_stat: stat_update() lo not found
<3>[18949.275057] qtaguid: iface_stat: stat_update() lo not found
<3>[18954.285109] qtaguid: iface_stat: stat_update() lo not found
<3>[18987.955051] qtaguid: iface_stat: stat_update() lo not found
<6>[18992.040962] cfg80211: Calling CRDA to update world regulatory domain
<6>[19024.556950] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
<6>[19055.252614] cfg80211: Calling CRDA to update world regulatory domain
<6>[19275.346843] cfg80211: Calling CRDA to update world regulatory domain
<6>[19319.133469] cfg80211: Calling CRDA to update world regulatory domain
<6>[19427.862548] cfg80211: Calling CRDA to update world regulatory domain
<6>[19540.114216] cfg80211: Calling CRDA to update world regulatory domain
<6>[19642.924244] cfg80211: Calling CRDA to update world regulatory domain
<6>[21977.180033] msm_otg_resume: usb exited from low power mode
<6>[21977.215362] a6_update_connected_ps: ac=0 usb=0 dock=0
<6>[21977.215389] max8903b_current_setup: ### CHARGE_DISABLE
<6>[21977.224994] gadget_event: source=none mA=0
<6>[21977.237348] a6_update_connected_ps: ac=0 usb=0 dock=0
<6>[21977.237381] max8903b_current_setup: ### CHARGE_DISABLE
<6>[21977.453443] msm_otg_suspend: usb in low power mode
<6>[22924.622370] gpio-keys: volume up button pressed
<6>[22925.002363] gpio-keys: volume up button released
<6>[22925.162372] gpio-keys: volume up button pressed
<6>[22925.392376] gpio-keys: volume up button released
<6>[22925.512432] gpio-keys: volume up button pressed
<6>[22925.732361] gpio-keys: volume up button released
<3>[23415.235121] qtaguid: iface_stat: stat_update() lo not found
<3>[23415.235172] qtaguid: iface_stat: stat_update() lo not found
<7>[23419.192384] wlan0: no IPv6 routers present
<3>[23420.235050] qtaguid: iface_stat: stat_update() lo not found
<3>[23420.235097] qtaguid: iface_stat: stat_update() lo not found
<3>[23425.183670] qtaguid: iface_stat: stat_update() lo not found
<3>[23425.183716] qtaguid: iface_stat: stat_update() lo not found
<3>[23425.193811] qtaguid: iface_stat: stat_update() lo not found
<3>[23430.185162] qtaguid: iface_stat: stat_update() lo not found
<3>[23430.185235] qtaguid: iface_stat: stat_update() lo not found
<3>[23430.195371] qtaguid: iface_stat: stat_update() lo not found
<3>[23435.185070] qtaguid: iface_stat: stat_update() lo not found
<3>[23435.185104] qtaguid: iface_stat: stat_update() lo not found
<3>[23435.185122] qtaguid: iface_stat: stat_update() lo not found
<3>[23440.195300] qtaguid: iface_stat: stat_update() lo not found
<3>[23440.195356] qtaguid: iface_stat: stat_update() lo not found
<3>[23440.205549] qtaguid: iface_stat: stat_update() lo not found
<3>[23445.195071] qtaguid: iface_stat: stat_update() lo not found
<3>[23445.195118] qtaguid: iface_stat: stat_update() lo not found
<3>[23445.205197] qtaguid: iface_stat: stat_update() lo not found
<3>[23450.205278] qtaguid: iface_stat: stat_update() lo not found
<3>[23450.205372] qtaguid: iface_stat: stat_update() lo not found
<3>[23450.215511] qtaguid: iface_stat: stat_update() lo not found
<3>[23490.262573] qtaguid: iface_stat: stat_update() lo not found
<3>[23490.262618] qtaguid: iface_stat: stat_update() lo not found
<3>[23490.273295] qtaguid: iface_stat: stat_update() lo not found
<3>[23495.272767] qtaguid: iface_stat: stat_update() lo not found
<3>[23500.272521] qtaguid: iface_stat: stat_update() lo not found
<3>[23525.207284] qtaguid: iface_stat: stat_update() lo not found
<3>[23530.209409] qtaguid: iface_stat: stat_update() lo not found
<3>[23535.222531] qtaguid: iface_stat: stat_update() lo not found
<3>[23540.222523] qtaguid: iface_stat: stat_update() lo not found
<3>[23545.232568] qtaguid: iface_stat: stat_update() lo not found
<3>[23550.232519] qtaguid: iface_stat: stat_update() lo not found
<3>[23555.242805] qtaguid: iface_stat: stat_update() lo not found
<3>[23555.242874] qtaguid: iface_stat: stat_update() lo not found
<3>[23555.253054] qtaguid: iface_stat: stat_update() lo not found
<3>[23559.535038] qtaguid: iface_stat: stat_update() lo not found
<3>[23559.535087] qtaguid: iface_stat: stat_update() lo not found
<3>[23559.545269] qtaguid: iface_stat: stat_update() lo not found
<3>[23566.478732] qtaguid: iface_stat: stat_update() lo not found
<3>[23571.492473] qtaguid: iface_stat: stat_update() lo not found
<6>[23636.923369] cfg80211: Calling CRDA to update world regulatory domain
<6>[24215.585261] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
<6>[24221.963148] msm_device_put:device speaker_stereo_rx set 0
<6>[24222.282521] cfg80211: Calling CRDA to update world regulatory domain
<6>[24226.671354] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
<6>[24228.067205] msm_device_put:device speaker_stereo_rx set 0
<6>[24228.067260] msm_device_put:device speaker_stereo_rx set 1
<3>[24228.076822] msm_device_put:device freq =48000
<6>[24228.089533] aif1 codec rates are already configured, just return
<6>[24231.343098] msm_device_put:device speaker_stereo_rx set 0
<7>[24238.362369] wlan0: no IPv6 routers present
<6>[24242.786987] msm_device_put:device speaker_stereo_rx set 0
<6>[24242.787041] msm_device_put:device speaker_stereo_rx set 1
<3>[24242.796454] msm_device_put:device freq =48000
<6>[24242.809501] aif1 codec rates are already configured, just return
<6>[24248.893096] msm_device_put:device speaker_stereo_rx set 0
<6>[24250.326687] msm_device_put:device speaker_stereo_rx set 0
<6>[24250.326724] msm_device_put:device speaker_stereo_rx set 1
<3>[24250.326734] msm_device_put:device freq =48000
<6>[24250.361511] aif1 codec rates are already configured, just return
<6>[24255.233105] msm_device_put:device speaker_stereo_rx set 0
<6>[24261.725850] msm_device_put:device speaker_stereo_rx set 0
<6>[24261.725886] msm_device_put:device speaker_stereo_rx set 1
<3>[24261.725895] msm_device_put:device freq =48000
<6>[24261.746236] aif1 codec rates are already configured, just return
<6>[24265.013438] msm_device_put:device speaker_stereo_rx set 0
<6>[24268.619680] msm_device_put:device speaker_stereo_rx set 0
<6>[24268.619731] msm_device_put:device speaker_stereo_rx set 1
<3>[24268.629138] msm_device_put:device freq =48000
<6>[24268.642001] aif1 codec rates are already configured, just return
<6>[24271.903089] msm_device_put:device speaker_stereo_rx set 0
<6>[24272.255342] msm_device_put:device speaker_stereo_rx set 0
<6>[24272.255392] msm_device_put:device speaker_stereo_rx set 1
<3>[24272.264844] msm_device_put:device freq =48000
<6>[24272.277874] aif1 codec rates are already configured, just return
<6>[24277.993386] msm_device_put:device speaker_stereo_rx set 0
<6>[24293.097544] msm_device_put:device speaker_stereo_rx set 0
<6>[24293.097596] msm_device_put:device speaker_stereo_rx set 1
<3>[24293.107094] msm_device_put:device freq =48000
<6>[24293.119863] aif1 codec rates are already configured, just return
<6>[24296.373309] msm_device_put:device speaker_stereo_rx set 0
<6>[24300.082582] msm_device_put:device speaker_stereo_rx set 0
<6>[24300.082633] msm_device_put:device speaker_stereo_rx set 1
<3>[24300.091976] msm_device_put:device freq =48000
<6>[24300.105194] aif1 codec rates are already configured, just return
<6>[24303.363075] msm_device_put:device speaker_stereo_rx set 0
<6>[24306.700008] msm_device_put:device speaker_stereo_rx set 0
<6>[24306.700045] msm_device_put:device speaker_stereo_rx set 1
<3>[24306.700053] msm_device_put:device freq =48000
<6>[24306.725749] aif1 codec rates are already configured, just return
<6>[24309.983074] msm_device_put:device speaker_stereo_rx set 0
<6>[24314.252076] msm_device_put:device speaker_stereo_rx set 0
<6>[24314.252127] msm_device_put:device speaker_stereo_rx set 1
<3>[24314.261555] msm_device_put:device freq =48000
<6>[24314.275958] aif1 codec rates are already configured, just return
<6>[24317.533094] msm_device_put:device speaker_stereo_rx set 0
<6>[24318.570527] msm_device_put:device speaker_stereo_rx set 0
<6>[24318.570582] msm_device_put:device speaker_stereo_rx set 1
<3>[24318.580156] msm_device_put:device freq =48000
<6>[24318.592895] aif1 codec rates are already configured, just return
<6>[24321.853077] msm_device_put:device speaker_stereo_rx set 0
<6>[24328.232872] msm_device_put:device speaker_stereo_rx set 0
<6>[24328.232923] msm_device_put:device speaker_stereo_rx set 1
<3>[24328.242286] msm_device_put:device freq =48000
<6>[24328.255242] aif1 codec rates are already configured, just return
<6>[24331.513087] msm_device_put:device speaker_stereo_rx set 0
<3>[24349.791642] init: untracked pid 32272 exited
<6>[24354.210314] msm_device_put:device speaker_stereo_rx set 0
<6>[24354.210364] msm_device_put:device speaker_stereo_rx set 1
<3>[24354.219876] msm_device_put:device freq =48000
<6>[24354.232599] aif1 codec rates are already configured, just return
<6>[24357.503499] msm_device_put:device speaker_stereo_rx set 0
<6>[24362.166882] msm_device_put:device speaker_stereo_rx set 0
<6>[24362.166946] msm_device_put:device speaker_stereo_rx set 1
<3>[24362.176338] msm_device_put:device freq =48000
<6>[24362.189464] aif1 codec rates are already configured, just return
<6>[24365.453086] msm_device_put:device speaker_stereo_rx set 0
<6>[24367.550251] msm_device_put:device speaker_stereo_rx set 0
<6>[24367.550288] msm_device_put:device speaker_stereo_rx set 1
<3>[24367.550297] msm_device_put:device freq =48000
<6>[24367.577048] aif1 codec rates are already configured, just return
<6>[24375.033673] msm_device_put:device speaker_stereo_rx set 0
<6>[24675.144497] msm_device_put:device speaker_stereo_rx set 0
<6>[24675.144548] msm_device_put:device speaker_stereo_rx set 1
<3>[24675.153963] msm_device_put:device freq =48000
<6>[24675.166794] aif1 codec rates are already configured, just return
<6>[24682.013119] msm_device_put:device speaker_stereo_rx set 0
<6>[24703.405362] msm_device_put:device speaker_stereo_rx set 0
<6>[24703.405415] msm_device_put:device speaker_stereo_rx set 1
<3>[24703.414844] msm_device_put:device freq =48000
<6>[24703.427676] aif1 codec rates are already configured, just return
<6>[24708.313113] msm_device_put:device speaker_stereo_rx set 0
<6>[24718.315634] msm_device_put:device speaker_stereo_rx set 0
<6>[24718.315683] msm_device_put:device speaker_stereo_rx set 1
<3>[24718.325141] msm_device_put:device freq =48000
<6>[24718.337983] aif1 codec rates are already configured, just return
<6>[24721.593090] msm_device_put:device speaker_stereo_rx set 0
<6>[24724.975116] msm_device_put:device speaker_stereo_rx set 0
<6>[24724.975168] msm_device_put:device speaker_stereo_rx set 1
<3>[24724.984617] msm_device_put:device freq =48000
<6>[24724.997456] aif1 codec rates are already configured, just return
<6>[24728.253084] msm_device_put:device speaker_stereo_rx set 0
<6>[24729.376415] msm_device_put:device speaker_stereo_rx set 0
<6>[24729.376467] msm_device_put:device speaker_stereo_rx set 1
<3>[24729.385881] msm_device_put:device freq =48000
<6>[24729.398813] aif1 codec rates are already configured, just return
<6>[24732.653415] msm_device_put:device speaker_stereo_rx set 0
<6>[24734.306030] msm_device_put:device speaker_stereo_rx set 0
<6>[24734.306080] msm_device_put:device speaker_stereo_rx set 1
<3>[24734.315522] msm_device_put:device freq =48000
<6>[24734.328387] aif1 codec rates are already configured, just return
<6>[24738.723067] msm_device_put:device speaker_stereo_rx set 0
<6>[24789.138715] msm_device_put:device speaker_stereo_rx set 0
<6>[24789.138766] msm_device_put:device speaker_stereo_rx set 1
<3>[24789.148171] msm_device_put:device freq =48000
<6>[24789.161059] aif1 codec rates are already configured, just return
<6>[24795.383118] msm_device_put:device speaker_stereo_rx set 0
<6>[24797.735646] msm_device_put:device speaker_stereo_rx set 0
<6>[24797.735697] msm_device_put:device speaker_stereo_rx set 1
<3>[24797.745284] msm_device_put:device freq =48000
<6>[24797.757956] aif1 codec rates are already configured, just return
<6>[24801.013120] msm_device_put:device speaker_stereo_rx set 0
<6>[24804.275242] msm_device_put:device speaker_stereo_rx set 0
<6>[24804.275281] msm_device_put:device speaker_stereo_rx set 1
<3>[24804.275289] msm_device_put:device freq =48000
<6>[24804.292433] aif1 codec rates are already configured, just return
<6>[24807.563129] msm_device_put:device speaker_stereo_rx set 0
<6>[24822.126821] msm_device_put:device speaker_stereo_rx set 0
<6>[24822.126860] msm_device_put:device speaker_stereo_rx set 1
<3>[24822.126870] msm_device_put:device freq =48000
<6>[24822.149121] aif1 codec rates are already configured, just return


Broadcasting: Intent { act=com.evervolv.toolbox.action.DUMPLOGCAT_FINISHED (has extras) }
Broadcast completed: result=0