------ LAST KMSG (/proc/last_klog) ------ platform_init_mmu_mappings: entry platform_init_mmu_mappings:57: mapping shared ram as uncached at 0x40000000 platform_init_mmu_mappings: exit platform_init_timer: entry platform_init_timer: exit platform_set_periodic_timer:39: cb 0x4010c6bd, arg 0x0, interval 10 ****************************************** * Welcome to bootie! * Version: 468 ****************************************** mmch_init: entry mmch_init: exit usbc: initialized (rc=0) target_init_buttonscan: entry target_init_board_id: emu=0, product=0x1, hwbuild=1 boardtype=topaz-Wifi-pvt Memory bank 0 -> address: 0x40200000-0x46700000 size:0x06500000 Memory bank 1 -> address: 0x48000000-0x7ff00000 size:0x37F00000 i2c_init: Register GSBI 3 as i2c bus 0 i2c_init_clock: The i2c clock rate is 19200000 i2c_init: Register GSBI 4 as i2c bus 1 i2c_init_clock: The i2c clock rate is 19200000 i2c_init: Register GSBI 9 as i2c bus 2 i2c_init_clock: The i2c clock rate is 19200000 i2c_init: Register GSBI 8 as i2c bus 3 i2c_init_clock: The i2c clock rate is 19200000 i2c_init: Register GSBI 7 as i2c bus 4 i2c_init_clock: The i2c clock rate is 19200000 a6_init_sbw_pins: TCK: 157, TDIO; 158, WKUP: 155 max8903b_gpio_init Starting battery authentication... Battery auth succeeded sys_init: entry Wall message(Boot reason) = 0x77665502 ("recovery") sys_init: booted because 'recovery' mmch_reset: entry Bus(0) Primecell ID regs: 0x80 0x11 0x4 0x0 0xd 0xf0 0x5 0xb1 sdc1_clk_set 400000 mmch_set_active:727: bus 0, active 1 sdc1_clk_set 400000 mmch_reset: exit mmch_set_active:727: bus 0, active 1 sdc1_clk_set 400000 cid: 0x2010053 0x454d3136 0x479051a5 0x50e86ef2 mfg id: 0x2 oem id: 0x100 name: 'SEM16G' rev: 0x90 sn: 0x51a550e8 date: 6.2011 sdc1_clk_set 50000000 token section is 4096 bytes long target_check_boot_condition: entry Wall message(Boot reason) = 0x77665502 ("recovery") display_init: displayWidth: 1024, displayHeight: 768 Wall message(Boot reason) = 0x77665502 ("recovery") p=79 ca=3990400 v=3889360 i=-985312 autobooting with 'fsboot' command loading file '/boot/uImage' to address 0x41000000 parse_uimage:241: uimage 0x41000000 <6>[ 0.000000] Booting Linux on physical CPU 0 <6>[ 0.000000] Initializing cgroup subsys cpu <5>[ 0.000000] Linux version 3.0.101-cyanogenmod-g2231aef (jc@jc-desk1) (gcc version 4.7 (GCC) ) #1 SMP PREEMPT Mon Mar 17 02:45:12 CDT 2014 <4>[ 0.000000] CPU: ARMv7 Processor [510f02d2] revision 2 (ARMv7), cr=10c5387d <4>[ 0.000000] CPU: VIPT nonaliasing data cache, VIVT ASID tagged instruction cache <4>[ 0.000000] Machine: TENDERLOIN <6>[ 0.000000] memory pool 0 (start 38000000 size 600000) initialized <6>[ 0.000000] memory pool 1 (start 38600000 size 3802000) initialized <6>[ 0.000000] memory pool 3 (start 75e00000 size 9800000) initialized <4>[ 0.000000] Memory policy: ECC disabled, Data cache writealloc <3>[ 0.000000] smem_find(137, 72): wrong size 64 <6>[ 0.000000] socinfo_init: v5, id=86, ver=2.0, raw_id=1696, raw_ver=1696, hw_plat=0, hw_plat_ver=65536 <6>[ 0.000000] accessory_chip=0 <7>[ 0.000000] On node 0 totalpages: 213760 <7>[ 0.000000] free_area_init_node: node 0, pgdat 80c96460, node_mem_map 81117000 <7>[ 0.000000] Normal zone: 2024 pages used for memmap <7>[ 0.000000] Normal zone: 0 pages reserved <7>[ 0.000000] Normal zone: 211736 pages, LIFO batch:31 <6>[ 0.000000] passing from bootie 6291456 bytes at 7f600000 physical for fb <6>[ 0.000000] PERCPU: Embedded 8 pages/cpu @81909000 s9536 r8192 d15040 u32768 <7>[ 0.000000] pcpu-alloc: s9536 r8192 d15040 u32768 alloc=8*4096 <7>[ 0.000000] pcpu-alloc: [0] 0 [0] 1 <4>[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 211736 <5>[ 0.000000] Kernel command line: root=/dev/ram0 rootwait ro fbcon=disable console=ttyS0,115200n8 androidboot.serialno=MHUBS9F1HNSJGRRLS6VR8481VBMJ9IFL fb=0x7f600000 nduid=63af5c3db01f2f907feacdcfd880a0f79d994eba klog=0x7ff00000 klog_len=0x100000 boardtype=topaz-Wifi-pvt lastboot=recovery <4>[ 0.000000] boardtype_setup: boardtype_str = topaz-Wifi-pvt <4>[ 0.000000] boardtype_setup: boardtype = topaz_wifi <6>[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) <6>[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) <6>[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) <6>[ 0.000000] allocated 4145152 bytes of page_cgroup <6>[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups <6>[ 0.000000] Memory: 101MB 734MB = 835MB total <5>[ 0.000000] Memory: 822288k/822288k available, 188400k reserved, 0K highmem <5>[ 0.000000] Virtual kernel memory layout: <5>[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) <5>[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) <5>[ 0.000000] DMA : 0xff000000 - 0xffe00000 ( 14 MB) <5>[ 0.000000] vmalloc : 0xbf800000 - 0xfa000000 ( 936 MB) <5>[ 0.000000] lowmem : 0x80000000 - 0xbf400000 (1012 MB) <5>[ 0.000000] pkmap : 0x7fe00000 - 0x80000000 ( 2 MB) <5>[ 0.000000] modules : 0x7f000000 - 0x7fe00000 ( 14 MB) <5>[ 0.000000] .init : 0x80008000 - 0x80055000 ( 308 kB) <5>[ 0.000000] .text : 0x80100000 - 0x80b75e44 (10712 kB) <5>[ 0.000000] .data : 0x80c00000 - 0x80c98b80 ( 611 kB) <5>[ 0.000000] .bss : 0x80c98ba4 - 0x811122c4 (4582 kB) <6>[ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 <6>[ 0.000000] Preemptible hierarchical RCU implementation. <6>[ 0.000000] NR_IRQS:855 <6>[ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms <6>[ 0.000000] Console: colour dummy device 80x30 <6>[ 0.150207] Calibrating delay using timer specific routine.. 13.52 BogoMIPS (lpj=67649) <6>[ 0.150299] pid_max: default: 32768 minimum: 301 <6>[ 0.150665] Security Framework initialized <6>[ 0.150726] SELinux: Initializing. <7>[ 0.150817] SELinux: Starting in permissive mode <6>[ 0.151000] Mount-cache hash table entries: 512 <6>[ 0.152282] Initializing cgroup subsys cpuacct <6>[ 0.152404] Initializing cgroup subsys memory <6>[ 0.152496] Initializing cgroup subsys freezer <6>[ 0.152618] CPU: Testing write buffer coherency: ok <6>[ 0.152984] hw perfevents: enabled with ARMv7 Scorpion-MP PMU driver, 5 counters available <4>[ 0.184448] CPU1: Booted secondary processor <6>[ 0.194366] Brought up 2 CPUs <6>[ 0.194396] SMP: Total of 2 processors activated (27.05 BogoMIPS). <6>[ 0.206878] print_constraints: dummy: <3>[ 0.207000] rdev_init_debugfs: Error-Bad Function Input <6>[ 0.207336] NET: Registered protocol family 16 <3>[ 0.207550] AXI: msm_bus_fabric_init_driver(): msm_bus_fabric_init_driver <6>[ 0.209167] msm_rpm_init: RPM firmware 2.0.67653 <4>[ 0.209686] tenderloin_setup_pin_table: using tenderloin_pins_wifi <6>[ 0.210083] saw_probe: id=0, name=8901_s0 <6>[ 0.210449] saw_probe: id=1, name=8901_s1 <6>[ 0.211914] rcg_clk_handoff: gsbi12_uart_clk rate=7372800 <6>[ 0.212005] rcg_clk_handoff: gsbi3_qup_clk rate=24000000 <6>[ 0.212066] rcg_clk_handoff: gsbi4_qup_clk rate=24000000 <6>[ 0.212127] rcg_clk_handoff: gsbi7_qup_clk rate=24000000 <6>[ 0.212188] rcg_clk_handoff: gsbi8_qup_clk rate=24000000 <6>[ 0.212249] rcg_clk_handoff: gsbi9_qup_clk rate=24000000 <6>[ 0.212341] rcg_clk_handoff: sdc1_clk rate=48000000 <6>[ 0.212402] rcg_clk_handoff: usb_hs1_xcvr_clk rate=60000000 <6>[ 0.212493] rcg_clk_handoff: dsi_byte_clk rate=1 <6>[ 0.212585] rcg_clk_handoff: mdp_clk rate=200000000 <6>[ 0.212738] rcg_clk_handoff: pixel_mdp_clk rate=96000000 <6>[ 0.214263] Max ACPU freq: 1512000 KHz <6>[ 0.219909] CPU0: 23 scaling frequencies supported. <6>[ 0.219940] CPU1: 23 scaling frequencies supported. <6>[ 0.221191] pm8058_probe: PMIC revision: E3 <6>[ 0.222229] pm_gpio_probe: OK: base=173, ngpio=40 <6>[ 0.222412] pm8xxx_mpp_probe: OK: base=213, ngpio=12 <6>[ 0.223266] pm8901_probe: PMIC REVISION = F4 <6>[ 0.223602] pm8xxx_mpp_probe: OK: base=225, ngpio=4 <6>[ 0.536468] gpio_vreg_probe: id=225, name=ext_5v, gpio=225, gpio_label=ext_5v_en <3>[ 0.537628] msm_snddev_init <3>[ 0.538238] Registering a6_0 device. <6>[ 0.552429] bio: create slab at 0 <6>[ 0.553863] ION heap vmalloc created <6>[ 0.553924] ION heap mm created at 38800000 with size 3600000 <6>[ 0.553955] ION heap mm_fw created at 38600000 with size 200000 <6>[ 0.554016] ION heap mfc created at 3be00000 with size 2000 <6>[ 0.554077] ION heap sf created at 75e00000 with size 4000000 <6>[ 0.554138] ION heap camera_preview created at 79e00000 with size 4000000 <6>[ 0.554199] ION heap wb created at 7de00000 with size 600000 <6>[ 0.554260] ION heap qsecom created at 7e400000 with size 600000 <6>[ 0.554290] ION heap audio created at 7ea00000 with size 28b000 <5>[ 0.554412] pmic8058_pwm_probe: OK <6>[ 0.554504] klog_init: phys buffer at 0x7ff00000 <6>[ 0.554565] klog_init: virt address at 0xbfe00000 <6>[ 0.554565] klog_init: found valid klog, len 1048576 <6>[ 0.554656] klog_init: using buffer 3 at 0xbfec0000, length 262116 <5>[ 0.555664] SCSI subsystem initialized <6>[ 0.555877] usbcore: registered new interface driver usbfs <6>[ 0.555999] usbcore: registered new interface driver hub <6>[ 0.556182] usbcore: registered new device driver usb <6>[ 0.556488] Advanced Linux Sound Architecture Driver Version 1.0.24. <6>[ 0.556976] Bluetooth: Core ver 2.16 <6>[ 0.557067] NET: Registered protocol family 31 <6>[ 0.557098] Bluetooth: HCI device and connection manager initialized <6>[ 0.557189] Bluetooth: HCI socket layer initialized <6>[ 0.557342] Switching to clocksource gp_timer <6>[ 0.573669] NET: Registered protocol family 2 <6>[ 0.573852] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) <6>[ 0.574279] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) <6>[ 0.575500] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) <6>[ 0.576202] TCP: Hash tables configured (established 131072 bind 65536) <6>[ 0.576293] TCP reno registered <6>[ 0.576324] UDP hash table entries: 512 (order: 2, 16384 bytes) <6>[ 0.576446] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) <6>[ 0.576904] NET: Registered protocol family 1 <6>[ 0.577362] RPC: Registered named UNIX socket transport module. <6>[ 0.577423] RPC: Registered udp transport module. <6>[ 0.577514] RPC: Registered tcp transport module. <6>[ 0.577575] RPC: Registered tcp NFSv4.1 backchannel transport module. <6>[ 0.577850] Trying to unpack rootfs image as initramfs... <6>[ 1.191741] Freeing initrd memory: 2388K <6>[ 1.191986] PMU: registered new PMU device of type 0 <6>[ 1.192169] PMU: registered new PMU device of type 1 <6>[ 1.192626] ETM/ETB intialized. <6>[ 1.192810] pil_qdsp6v3 pil_qdsp6v3: using non-secure boot <3>[ 1.193542] smd_channel_probe_worker: allocation table not initialized <7>[ 1.198120] gpio_request: gpio-229 (msm_icodec_speaker_right) status -22 <3>[ 1.198211] initialize_msm_icodec_gpios: icodec gpio 229 request failed <3>[ 1.198303] msm_icodec_gpio_probe: GPIO configuration failed <6>[ 1.200836] Powering off BT - ignored <5>[ 1.201934] msm_rpm_log_probe: OK <6>[ 1.202301] audit: initializing netlink socket (disabled) <5>[ 1.202392] type=2000 audit(1.170:1): initialized <6>[ 1.281097] ashmem: initialized <6>[ 1.287139] NTFS driver 2.1.30 [Flags: R/W]. <6>[ 1.287414] fuse init (API version 7.16) <6>[ 1.287658] msgmni has been set to 1610 <7>[ 1.287750] SELinux: Registering netfilter hooks <6>[ 1.289550] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) <6>[ 1.289672] io scheduler noop registered <6>[ 1.289703] io scheduler deadline registered <6>[ 1.289764] io scheduler row registered (default) <6>[ 1.289886] io scheduler cfq registered <4>[ 1.292083] mdp4_csc_config: Block type 10 isn't supported by CSC. <4>[ 1.292144] mdp4_csc_config: Block type 8 isn't supported by CSC. <3>[ 1.295440] lcdc_lg_panel_init: called <6>[ 1.295806] Lcdc_lg_probe: bl_pwm0=b575a800 LPG_chan0=0 <6>[ 1.299865] mdp4_lcdc_vsync_init: ndx=0 <6>[ 1.304290] FrameBuffer[0] 1024x768 size=6291456 bytes is registered successfully! <3>[ 1.304412] pm_runtime: fail to wake up <3>[ 1.304473] lcdc_common_panel_power: on=1 isOn=0 <4>[ 1.308410] mdp4_csc_config: Block type 10 isn't supported by CSC. <4>[ 1.308502] mdp4_csc_config: Block type 8 isn't supported by CSC. <4>[ 1.311431] load_565rle_image: Can not open /initlogo.rle <7>[ 1.311767] Registered led device: lcd-backlight <6>[ 1.311828] mdp4_lcdc_vsync_init: ndx=0 <6>[ 1.312744] <6>[ 1.312774] msm_vidc_enc: Inside vid_enc_init() <6>[ 1.312988] <6>[ 1.313018] msm_vidc_enc: Inside vid_enc_vcd_init() <3>[ 1.383300] msm_serial_hs_init failed to load <6>[ 1.383453] msm_serial_hsl: detected port #0 <6>[ 1.383636] msm_serial_hsl.0: ttyHSL0 at MMIO 0x19c40000 (irq = 227) is a MSM <6>[ 1.384277] msm_serial_hsl: driver initialized <6>[ 1.385467] msm_rotator_probe: rotator_hw_revision=1 <6>[ 1.391998] kgsl kgsl-3d0: |kgsl_gpummu_init| MMU type set for device is GPUMMU <6>[ 1.393493] kgsl kgsl-2d0: |kgsl_gpummu_init| MMU type set for device is GPUMMU <6>[ 1.394683] kgsl kgsl-2d1: |kgsl_gpummu_init| MMU type set for device is GPUMMU <6>[ 1.399841] brd: module loaded <6>[ 1.401916] loop: module loaded <6>[ 1.402130] pmem: Initializing pmem_adsp (user-space) as non-cached <6>[ 1.402557] allocating 6291456 bytes at (null) (7ec8b000 physical) for pmem_adsp <6>[ 1.402709] pmem: Initializing pmem_audio (user-space) as non-cached <6>[ 1.402954] allocating 2666496 bytes at (null) (7f28b000 physical) for pmem_audio <5>[ 1.403350] pm8xxx_upl_probe: OK <4>[ 1.404754] hsuart_tty:created 'ttyHS0' device on UART 0 <4>[ 1.404937] user-pins: configuring irq for gpio 129 <6>[ 1.405364] Initialize hres_counter device <6>[ 1.405487] Before a6 call to i2c_add_driver. <3>[ 1.406677] a6_init_state: enabling A6 internal wake. <3>[ 1.406768] a6_init_state: TS2_I2C_WAKEUP_PERIOD = 0x1b <6>[ 1.451293] A6 Version: HW: 255, FW (M.m.B): 2.13.25, ManID: 28769, ProdTyp: 1281 <5>[ 1.478332] A6 driver initialized successfully! <3>[ 1.479492] a6_init_state: enabling A6 internal wake. <3>[ 1.479614] a6_init_state: TS2_I2C_WAKEUP_PERIOD = 0x1b <6>[ 1.531311] A6 Version: HW: 255, FW (M.m.B): 2.7.29, ManID: 28769, ProdTyp: 1793 <5>[ 1.534820] A6 driver initialized successfully! <4>[ 1.534912] i2c-core: driver [a6] using legacy suspend method <4>[ 1.534973] i2c-core: driver [a6] using legacy resume method <3>[ 1.535369] msm_wm8958_setup_power: codec power setup <3>[ 1.535461] wm8994_ldo_power: Power up the WM8994 LDOs <6>[ 1.566802] wm8994 4-001a: WM8958 revision B <4>[ 1.582244] wm8994 4-001a: No interrupt specified, no interrupts <7>[ 1.582519] gpiochip_find_base: found new base at 501 <3>[ 1.582672] wm8994_resume: CALLED <3>[ 1.582733] wm8994_suspend: CALLED <3>[ 1.587097] msm_wm8958_shutdown_power: codec power shutdown <3>[ 1.587158] wm8994_ldo_power: Power down the WM8994 LDOs <6>[ 1.588378] SCSI Media Changer driver v0.25 <6>[ 1.589233] PPP generic driver version 2.4.2 <6>[ 1.589569] PPP Deflate Compression module registered <6>[ 1.589630] PPP BSD Compression module registered <6>[ 1.591430] PPP MPPE Compression module registered <6>[ 1.591491] NET: Registered protocol family 24 <6>[ 1.591583] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled). <6>[ 1.591705] CSLIP: code copyright 1989 Regents of the University of California. <6>[ 1.592132] tun: Universal TUN/TAP device driver, 1.6 <6>[ 1.592193] tun: (C) 1999-2004 Max Krasnyansky <6>[ 1.592651] usbcore: registered new interface driver asix <6>[ 1.592773] usbcore: registered new interface driver cdc_ether <6>[ 1.592864] usbcore: registered new interface driver net1080 <6>[ 1.592956] usbcore: registered new interface driver cdc_subset <6>[ 1.593078] usbcore: registered new interface driver zaurus <6>[ 1.593170] cdc_ncm: 04-Aug-2011 <6>[ 1.593231] usbcore: registered new interface driver cdc_ncm <6>[ 1.593292] rmnet_init: SMD devices[8] <3>[ 1.599304] Error: Driver 'msm_otg' is already registered, aborting... <6>[ 1.599395] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver <6>[ 1.599609] host driver registered w/ tranceiver <6>[ 1.599792] usbcore: registered new interface driver cdc_acm <6>[ 1.599853] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters <6>[ 1.599945] Initializing USB Mass Storage driver... <6>[ 1.600067] usbcore: registered new interface driver usb-storage <6>[ 1.600128] USB Mass Storage support registered. <6>[ 1.600219] usbcore: registered new interface driver usb_ehset_test <6>[ 1.600524] peripheral driver registered w/ tranceiver <4>[ 1.600799] msm_otg_sm_work 1816 id=0 OTG_STATE_UNDEFINED <6>[ 1.602966] android_usb gadget: Mass Storage Function, version: 2009/09/11 <6>[ 1.603057] android_usb gadget: Number of LUNs=2 <6>[ 1.603118] lun0: LUN: removable file: (no medium) <6>[ 1.603179] lun1: LUN: removable file: (no medium) <6>[ 1.603546] android_usb gadget: android_usb ready <4>[ 1.603851] mousedev: could not register psaux device, error: -16 <6>[ 1.603942] mousedev: PS/2 mouse device common for all mice <6>[ 1.604583] input: gpio-keys as /devices/platform/gpio-keys/input/input0 <3>[ 1.606628] board_cy8ctma395_vdd_enable: enable=1 isPowerOn=0 <6>[ 1.618164] input: pmic8xxx_pwrkey as /devices/platform/msm_ssbi.0/pm8058-core/pm8xxx-pwrkey/input/input1 <6>[ 1.618957] <6>lsm303dlh magnetometer driver <3>[ 1.619049] lsm303dlh_mag_sysfs: probe start <6>[ 1.619628] input: lsm303dlh_mag_sysfs as /devices/i2c-0/0-001e/input/input2 <6>[ 1.620025] lsm303dlh_mag_sysfs 0-001e: lsm303dlh_mag probed <7>[ 1.620178] lsm303dlh_acc_sysfs accelerometer driver: init <6>[ 1.620269] lsm303dlh_acc_sysfs: probe start. <6>[ 1.620330] lsm303dlh_acc_sysfs: hw init start <6>[ 1.621185] lsm303dlh_acc_sysfs: hw init done <6>[ 1.621673] input: lsm303dlh_acc_sysfs as /devices/i2c-0/0-0018/input/input3 <6>[ 1.622070] lsm303dlh_acc_sysfs 0-0018: lsm303dlh_acc_sysfs: probed <4>[ 1.622161] i2c-core: driver [lsm303dlh_acc_sysfs] using legacy suspend method <4>[ 1.622253] i2c-core: driver [lsm303dlh_acc_sysfs] using legacy resume method <6>[ 1.624420] input: isl29023 light sensor as /devices/virtual/input/input4 <6>[ 1.624786] isl29023 0-0044: driver version 1.0 enabled <4>[ 1.624908] i2c-core: driver [isl29023] using legacy suspend method <4>[ 1.625000] i2c-core: driver [isl29023] using legacy resume method <6>[ 1.625091] i2c i2c-0: mpu3050: +lsm303dlha <6>[ 1.625152] i2c i2c-0: mpu3050: +lsm303dlhm <4>[ 1.625213] i2c i2c-0: WARNING: Compass irq not assigned <4>[ 1.625274] i2c i2c-0: mpu3050: No Pressure Present <6>[ 1.639404] i2c i2c-0: Installing irq using 381 <6>[ 1.639465] i2c i2c-0: Module Param interface = mpuirq <4>[ 1.639923] i2c-core: driver [mpu3050] using legacy suspend method <4>[ 1.640014] i2c-core: driver [mpu3050] using legacy resume method <7>[ 1.640106] mpu_init <6>[ 1.641174] using rtc device, pm8xxx_rtc, for alarms <6>[ 1.641265] rtc-pm8xxx rtc-pm8xxx: rtc core: registered pm8xxx_rtc as rtc0 <6>[ 1.641571] i2c /dev entries driver <6>[ 1.642700] Linux video capture interface: v2.00 <6>[ 1.642852] usbcore: registered new interface driver uvcvideo <6>[ 1.642944] USB Video Class driver (v1.1.0) <4>[ 1.643371] +++ config_camera_on_gpios_web_cam_mt9m113 <4>[ 1.643768] config_camera_on_gpios_web_cam_mt9m113:enable the regulator votg_lvs0 succeed <4>[ 1.644439] config_camera_on_gpios_web_cam_mt9m113:enable the regulator votg_vreg_l11 succeed <4>[ 1.644531] --- config_camera_on_gpios_web_cam_mt9m113 <4>[ 1.710937] +++ config_camera_off_gpios_web_cam_mt9m113 <4>[ 1.711273] config_camera_off_gpios_web_cam_mt9m113:disable the regulator: votg_lvs0 succeed <4>[ 1.711669] config_camera_off_gpios_web_cam_mt9m113:disable the regulator: votg_vreg_l11 succeed <4>[ 1.711791] --- config_camera_off_gpios_web_cam_mt9m113 <6>[ 1.711883] msm_sync_init: initialized mt9m113 <6>[ 1.712921] msm_gemini_init gemini: success <6>[ 1.713165] max8903b driver registeration! rc = 0 <5>[ 1.728088] tsens_tm_probe: OK <6>[ 1.728485] device-mapper: uevent: version 1.0.3 <6>[ 1.729003] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com <6>[ 1.729248] Bluetooth: MSM Sleep Mode Driver Ver 1.1 <6>[ 1.729858] cpuidle: using governor ladder <6>[ 1.729919] cpuidle: using governor menu <6>[ 1.730316] mmc0: mci-version: 0 <3>[ 1.730438] mmc0: No card detect facilities available <6>[ 1.730773] mmc0: Qualcomm MSM SDCC-core at 0x0000000012400000 irq 136,0 dma 18 dmacrcri 1 <6>[ 1.730895] mmc0: 8 bit data mode enabled <6>[ 1.730926] mmc0: 4 bit data mode disabled <6>[ 1.730987] mmc0: polling status mode disabled <6>[ 1.731079] mmc0: MMC clock 400000 -> 48000000 Hz, PCLK 0 Hz <6>[ 1.731170] mmc0: Slot eject status = 0 <6>[ 1.731201] mmc0: Power save feature enable = 1 <6>[ 1.731262] mmc0: DM non-cached buffer at ffda0000, dma_addr 0x74040000 <6>[ 1.731353] mmc0: DM cmd busaddr 0x74040000, cmdptr busaddr 0x74057f40 <6>[ 1.732025] mmc1: mci-version: 0 <3>[ 1.733306] mmc1: No card detect facilities available <6>[ 1.733520] mmc1: Qualcomm MSM SDCC-core at 0x00000000121c0000 irq 133,0 dma 21 dmacrcri 5 <6>[ 1.733642] mmc1: 8 bit data mode disabled <6>[ 1.733703] mmc1: 4 bit data mode enabled <6>[ 1.733764] mmc1: polling status mode disabled <6>[ 1.733825] mmc1: MMC clock 400000 -> 48000000 Hz, PCLK 0 Hz <6>[ 1.733886] mmc1: Slot eject status = 0 <6>[ 1.733947] mmc1: Power save feature enable = 1 <6>[ 1.734039] mmc1: DM non-cached buffer at ffd80000, dma_addr 0x74060000 <6>[ 1.734130] mmc1: DM cmd busaddr 0x74060000, cmdptr busaddr 0x74077f40 <4>[ 1.734222] tenderloin_probe_wifi: id 4 mmc b560c000 <7>[ 1.734710] LM8502 module init called <7>[ 1.734802] LM8502 probe called <4>[ 1.827972] msm_otg_sm_work 1819 id=1 OTG_STATE_UNDEFINED <3>[ 1.835052] qup_i2c qup_i2c.3: QUP: I2C status flags :0x1343c8, irq:193 <3>[ 1.835174] qup_i2c qup_i2c.3: I2C slave addr:0x33 not connected <3>[ 1.835235] Unable to read LM8502 registers <7>[ 1.837585] Registered led device: core_navi_left <7>[ 1.838439] Registered led device: core_navi_right <4>[ 1.839965] i2c-core: driver [LM8502] using legacy suspend method <4>[ 1.840057] i2c-core: driver [LM8502] using legacy resume method <6>[ 1.841522] usbcore: registered new interface driver usbhid <6>[ 1.841583] usbhid: USB HID core driver <6>[ 1.842285] logger: created 512K log 'log_main' <6>[ 1.842468] logger: created 256K log 'log_events' <6>[ 1.842651] logger: created 512K log 'log_radio' <6>[ 1.842834] logger: created 256K log 'log_system' <6>[ 1.843475] zram: Created 1 device(s) ... <6>[ 1.843994] usbcore: registered new interface driver snd-usb-audio <6>[ 1.844879] msm-cpu-dai msm-cpu-dai.0: asoc_msm_cpu_probe: dev name msm-cpu-dai.0 <6>[ 1.845123] msm-codec-dai msm-codec-dai.0: asoc_msm_codec_probe: dev name msm-codec-dai.0 <6>[ 1.845336] msm-dsp-audio msm-dsp-audio.0: msm_pcm_probe: dev name msm-dsp-audio.0 <3>[ 1.845794] wm8994_resume: CALLED <3>[ 1.845855] msm_wm8958_setup_power: codec power setup <3>[ 1.845947] wm8994_ldo_power: Power up the WM8994 LDOs <6>[ 1.850463] mmc0: new high speed MMC card at address 0001 <6>[ 1.851013] mmcblk0: mmc0:0001 SEM16G 14.8 GiB <6>[ 1.851287] mmcblk0boot0: mmc0:0001 SEM16G partition 1 1.00 MiB <6>[ 1.851593] mmcblk0boot1: mmc0:0001 SEM16G partition 2 1.00 MiB <6>[ 1.859283] mmcblk0: p1 p2 p3 p4 < p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 > <6>[ 1.864990] mmcblk0boot1: unknown partition table <6>[ 1.867309] mmcblk0boot0: unknown partition table <6>[ 1.869262] a6_update_connected_ps: ac=0 usb=0 dock=0 (a6_charger_event) <6>[ 1.869354] max8903b_current_setup: ### CHARGE_DISABLE <6>[ 1.870117] msm_otg_suspend: usb in low power mode <6>[ 2.114959] Headphone switch initialized, plugged=0 <6>[ 2.118591] asoc: wm8994-aif1 <-> msm-cpu-dai.0 mapping ok <6>[ 2.119750] asoc: wm8994-aif2 <-> msm-cpu-dai.0 mapping ok <6>[ 2.120697] input: msm-audio headset as /devices/platform/soc-audio/sound/card0/input5 <6>[ 2.121276] mvs-cpu-dai mvs-cpu-dai.0: asoc_mvs_cpu_probe: dev name mvs-cpu-dai.0 <6>[ 2.121520] mvs-codec-dai mvs-codec-dai.0: asoc_mvs_codec_probe: dev name mvs-codec-dai.0 <6>[ 2.121765] msm-mvs-audio msm-mvs-audio.0: msm_pcm_probe: dev name msm-mvs-audio.0 <6>[ 2.122863] ALSA device list: <6>[ 2.122924] #0: msm-audio <6>[ 2.123229] oprofile: using arm/armv7-scorpionmp <6>[ 2.123382] GACT probability NOT on <6>[ 2.123443] Mirror/redirect action on <6>[ 2.123504] u32 classifier <6>[ 2.123535] Actions configured <6>[ 2.123596] Netfilter messages via NETLINK v0.30. <6>[ 2.123718] nf_conntrack version 0.5.0 (12885 buckets, 51540 max) <6>[ 2.124176] ctnetlink v0.93: registering with nfnetlink. <6>[ 2.124298] NF_TPROXY: Transparent proxy support initialized, version 4.1.0 <6>[ 2.124389] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd. <6>[ 2.125030] xt_time: kernel timezone is -0000 <6>[ 2.125244] ip_tables: (C) 2000-2006 Netfilter Core Team <6>[ 2.125488] arp_tables: (C) 2002 David S. Miller <6>[ 2.125610] TCP cubic registered <6>[ 2.125671] Initializing XFRM netlink socket <6>[ 2.126190] NET: Registered protocol family 10 <6>[ 2.127227] Mobile IPv6 <6>[ 2.127319] ip6_tables: (C) 2000-2006 Netfilter Core Team <6>[ 2.127471] IPv6 over IPv4 tunneling driver <6>[ 2.128326] NET: Registered protocol family 17 <6>[ 2.128417] NET: Registered protocol family 15 <6>[ 2.128509] L2TP core driver, V2.0 <6>[ 2.128570] PPPoL2TP kernel driver, V2.0 <6>[ 2.128631] L2TP IP encapsulation support (L2TPv3) <6>[ 2.128814] L2TP netlink interface <6>[ 2.128906] NET: Registered protocol family 35 <5>[ 2.129028] Registering the dns_resolver key type <6>[ 2.129119] VFP support v0.3: implementor 51 architecture 64 part 2d variant 0 rev 0 <5>[ 2.129241] Registering SWP/SWPB emulation handler <6>[ 2.138122] clock_late_init() disabled 202 unused clocks <6>[ 2.138854] cpufreq: cpu0 init at 1512000 switching to 1188000 <6>[ 2.139678] cpufreq: cpu1 init at 1512000 switching to 1188000 <6>[ 2.144561] MSM Watchdog Initialized <6>[ 2.145599] msm_hotplug: Device init <3>[ 2.145660] set_dload_mode <0> ( 800154E8 ) <6>[ 2.146850] rtc-pm8xxx rtc-pm8xxx: setting system clock to 2016-02-22 06:31:21 UTC (1456122681) <6>[ 2.146972] msm_v4l2: msm_v4l2_init <4>[ 2.147430] Warning: unable to open an initial console. <6>[ 2.147857] Freeing init memory: 308K <7>[ 2.154205] SELinux: 512 avtab hash slots, 1334 rules. <7>[ 2.154907] SELinux: 512 avtab hash slots, 1334 rules. <7>[ 2.154998] SELinux: 1 users, 2 roles, 289 types, 1 bools, 1 sens, 1024 cats <7>[ 2.155090] SELinux: 84 classes, 1334 rules <7>[ 2.156127] SELinux: Completing initialization. <7>[ 2.156188] SELinux: Setting up existing superblocks. <7>[ 2.156280] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts <7>[ 2.156372] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts <7>[ 2.156951] SELinux: initialized (dev bdev, type bdev), not configured for labeling <7>[ 2.157073] SELinux: initialized (dev proc, type proc), uses genfs_contexts <7>[ 2.157165] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs <7>[ 2.157287] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts <7>[ 2.164855] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs <7>[ 2.164978] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs <7>[ 2.165100] SELinux: initialized (dev anon_inodefs, type anon_inodefs), not configured for labeling <7>[ 2.165222] SELinux: initialized (dev devpts, type devpts), uses transition SIDs <7>[ 2.165344] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts <7>[ 2.165557] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs <7>[ 2.165679] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts <5>[ 2.454101] type=1403 audit(1456122681.800:2): policy loaded auid=4294967295 ses=4294967295 <4>[ 2.454406] SELinux: Loaded policy from /sepolicy <5>[ 2.457397] type=1404 audit(1456122681.800:3): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295 <3>[ 4.911926] healthd: wakealarm_init: timerfd_create failed <3>[ 5.412902] init: cannot open '/initlogo.rle' <7>[ 5.419921] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs <7>[ 5.421783] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs <7>[ 5.423614] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs <7>[ 5.425354] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs <3>[ 5.426055] android_usb: already disabled <6>[ 5.437316] kjournald starting. Commit interval 5 seconds <4>[ 5.437469] EXT3-fs (mmcblk0p13): warning: maximal mount count reached, running e2fsck is recommended <6>[ 5.439941] EXT3-fs (mmcblk0p13): using internal journal <6>[ 5.440155] EXT3-fs (mmcblk0p13): mounted filesystem with writeback data mode <7>[ 5.440460] SELinux: initialized (dev mmcblk0p13, type ext3), uses xattr <3>[ 5.941589] init: Unable to open persistent property directory /data/property errno: 2 <3>[ 5.961578] fs_mgr: Cannot open file /etc/extra.fstab <3>[ 5.980346] board_cy8ctma395_vdd_enable: enable=1 isPowerOn=1 <4>[ 5.984588] EXT4-fs (dm-9): warning: maximal mount count reached, running e2fsck is recommended <7>[ 6.009185] EXT4-fs (dm-9): ext4_orphan_cleanup: deleting unreferenced inode 15345 <7>[ 6.018218] EXT4-fs (dm-9): ext4_orphan_cleanup: deleting unreferenced inode 14388 <6>[ 6.019500] EXT4-fs (dm-9): 2 orphan inodes deleted <6>[ 6.019561] EXT4-fs (dm-9): recovery complete <4>[ 6.061889] CPU1: Booted secondary processor <6>[ 6.154479] input: HPTouchpad as /devices/virtual/input/input6 <6>[ 6.323455] EXT4-fs (dm-9): mounted filesystem with ordered data mode. Opts: <7>[ 6.323669] SELinux: initialized (dev dm-9, type ext4), uses xattr <3>[ 6.392822] android_usb: already disabled <6>[ 6.404785] adb_open <6>[ 6.404815] adb_bind_config <6>[ 6.971710] msmsdcc_runtime_suspend: Enter WIFI suspend <6>[ 7.002044] lsm303dlh_acc_sysfs: hw init start <6>[ 7.009063] lsm303dlh_acc_sysfs: hw init done <3>[ 7.291717] fs_mgr: Cannot open file /etc/extra.fstab <4>[ 7.315002] EXT4-fs (dm-9): warning: maximal mount count reached, running e2fsck is recommended <6>[ 7.320495] EXT4-fs (dm-9): mounted filesystem with ordered data mode. Opts: <7>[ 7.320739] SELinux: initialized (dev dm-9, type ext4), uses xattr <6>[ 7.331634] SELinux: Context u:object_r:media_rw_data_file:s0 is not valid (left unmapped). <6>[ 7.392181] EXT4-fs (dm-8): recovery complete <6>[ 7.393737] EXT4-fs (dm-8): mounted filesystem with ordered data mode. Opts: <7>[ 7.393951] SELinux: initialized (dev dm-8, type ext4), uses xattr <6>[ 7.396179] SELinux: Context u:object_r:recovery_cache_file:s0 is not valid (left unmapped). <4>[ 7.426269] EXT4-fs (dm-9): warning: maximal mount count reached, running e2fsck is recommended <6>[ 7.430419] EXT4-fs (dm-9): mounted filesystem with ordered data mode. Opts: <7>[ 7.430664] SELinux: initialized (dev dm-9, type ext4), uses xattr <6>[ 7.501678] [set_pmic_backlight] backlight enabled <6>[ 7.706970] SELinux: Context u:object_r:zoneinfo_data_file:s0 is not valid (left unmapped). <4>[ 10.729919] EXT4-fs (dm-9): warning: maximal mount count reached, running e2fsck is recommended <6>[ 10.741577] EXT4-fs (dm-9): mounted filesystem with ordered data mode. Opts: <7>[ 10.741821] SELinux: initialized (dev dm-9, type ext4), uses xattr <6>[ 13.230438] EXT4-fs (dm-8): mounted filesystem with ordered data mode. Opts: <7>[ 13.230682] SELinux: initialized (dev dm-8, type ext4), uses xattr <6>[ 19.710937] SELinux: Context u:object_r:dalvikcache_profiles_data_file:s0 is not valid (left unmapped). <6>[ 25.991333] EXT4-fs (dm-10): mounted filesystem with ordered data mode. Opts: <7>[ 25.991607] SELinux: initialized (dev dm-10, type ext4), uses xattr <6>[ 26.051055] SysRq : Emergency Remount R/O <6>[ 26.057189] EXT4-fs (dm-8): re-mounted. Opts: (null) <4>[ 26.058258] Emergency Remount complete <4>[ 26.059997] Disabling non-boot CPUs ... <0>[ 26.060119] Restarting system. <4>[ 26.060211] <0>[ 26.060272] Restarting Linux version 3.0.101-cyanogenmod-g2231aef (jc@jc-desk1) (gcc version 4.7 (GCC) ) #1 SMP PREEMPT Mon Mar 17 02:45:12 CDT 2014 <0>[ 26.060577] <3>[ 26.061401] set_dload_mode <0> ( 80167B08 ) <3>[ 26.061645] set_dload_mode <0> ( 80167B10 ) <5>[ 26.061859] Going down for restart now <3>[ 26.062072] pm8xxx_reset_pwr_off, [1] <3>[ 26.062255] pm8xxx_reset_pwr_off, [2] <3>[ 26.062438] pm8xxx_reset_pwr_off, [3] <3>[ 26.062713] pm8xxx_reset_pwr_off, [4] <3>[ 26.062896] pm8xxx_reset_pwr_off, [5] <3>[ 26.071105] pm8xxx_reset_pwr_off, [6] <3>[ 26.071319] pm8xxx_reset_pwr_off, [7] <3>[ 26.071502] pm8xxx_reset_pwr_off, [8] <6>[ 26.071716] arch_reset: Initiating reboot via bootloader Broadcasting: Intent { act=com.evervolv.toolbox.action.DUMPLOGCAT_FINISHED (has extras) } Broadcast completed: result=0