------ LAST KMSG (/proc/last_klog) ------ platform_init_mmu_mappings: entry platform_init_mmu_mappings:57: mapping shared ram as uncached at 0x40000000 platform_init_mmu_mappings: exit platform_init_timer: entry platform_init_timer: exit platform_set_periodic_timer:39: cb 0x4010c6bd, arg 0x0, interval 10 ****************************************** * Welcome to bootie! * Version: 468 ****************************************** mmch_init: entry mmch_init: exit usbc: initialized (rc=0) target_init_buttonscan: entry target_init_board_id: emu=0, product=0x1, hwbuild=1 boardtype=topaz-Wifi-pvt Memory bank 0 -> address: 0x40200000-0x46700000 size:0x06500000 Memory bank 1 -> address: 0x48000000-0x7ff00000 size:0x37F00000 i2c_init: Register GSBI 3 as i2c bus 0 i2c_init_clock: The i2c clock rate is 19200000 i2c_init: Register GSBI 4 as i2c bus 1 i2c_init_clock: The i2c clock rate is 19200000 i2c_init: Register GSBI 9 as i2c bus 2 i2c_init_clock: The i2c clock rate is 19200000 i2c_init: Register GSBI 8 as i2c bus 3 i2c_init_clock: The i2c clock rate is 19200000 i2c_init: Register GSBI 7 as i2c bus 4 i2c_init_clock: The i2c clock rate is 19200000 a6_init_sbw_pins: TCK: 157, TDIO; 158, WKUP: 155 max8903b_gpio_init Starting battery authentication... Battery auth succeeded sys_init: entry Wall message(Boot reason) = 0x6f656d44 ("reboot") sys_init: booted because 'reboot' mmch_reset: entry Bus(0) Primecell ID regs: 0x80 0x11 0x4 0x0 0xd 0xf0 0x5 0xb1 sdc1_clk_set 400000 mmch_set_active:727: bus 0, active 1 sdc1_clk_set 400000 mmch_reset: exit mmch_set_active:727: bus 0, active 1 sdc1_clk_set 400000 cid: 0x2010053 0x454d3332 0x47903034 0xc27a4ea4 mfg id: 0x2 oem id: 0x100 name: 'SEM32G' rev: 0x90 sn: 0x3034c27a date: 4.2011 sdc1_clk_set 50000000 token section is 4096 bytes long target_check_boot_condition: entry Wall message(Boot reason) = 0x6f656d44 ("reboot") display_init: displayWidth: 1024, displayHeight: 768 Wall message(Boot reason) = 0x6f656d44 ("reboot") p=100 ca=5198400 v=4138240 i=-609218 autobooting with 'fsboot' command loading file '/boot/uImage' to address 0x41000000 parse_uimage:241: uimage 0x41000000 <6>[ 0.000000] Booting Linux on physical CPU 0 <6>[ 0.000000] Initializing cgroup subsys cpu <5>[ 0.000000] Linux version 3.4.82-tenderloin+ (ev_nightlies@evervolv.codefi.re) (gcc version 4.7 (GCC) ) #1 SMP PREEMPT Sat Nov 22 06:38:42 PST 2014 <1>[ 0.000000] CPU: ARMv7 Processor [510f02d2] revision 2 (ARMv7), cr=10c5387d <1>[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIVT ASID tagged instruction cache <1>[ 0.000000] Machine: tenderloin <6>[ 0.000000] memory pool 3 (start 76400000 size 9200000) initialized <1>[ 0.000000] Memory policy: ECC disabled, Data cache writealloc <3>[ 0.000000] smem_find(137, 80): wrong size 64 <3>[ 0.000000] smem_find(137, 72): wrong size 64 <6>[ 0.000000] socinfo_init: v5, id=86, ver=2.0, raw_id=1696, raw_ver=1696, hw_plat=0, hw_plat_ver=65536 <6>[ 0.000000] accessory_chip=0 <7>[ 0.000000] On node 0 totalpages: 215296 <7>[ 0.000000] free_area_init_node: node 0, pgdat 809c0600, node_mem_map 80c54000 <7>[ 0.000000] Normal zone: 2024 pages used for memmap <7>[ 0.000000] Normal zone: 0 pages reserved <7>[ 0.000000] Normal zone: 213272 pages, LIFO batch:31 <6>[ 0.000000] passing from bootie 9437184 bytes at 7f600000 physical for fb <6>[ 0.000000] PERCPU: Embedded 6 pages/cpu @81449000 s12096 r0 d12480 u32768 <7>[ 0.000000] pcpu-alloc: s12096 r0 d12480 u32768 alloc=8*4096 <7>[ 0.000000] pcpu-alloc: [0] 0 [0] 1 <1>[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 213272 <5>[ 0.000000] Kernel command line: root=/dev/ram0 rootwait ro fbcon=disable console=ttyS0,115200n8 androidboot.serialno=QRKGO0AMV2LFN3HDFKCKF9PDNKMIOVSV fb=0x7f600000 nduid=a73588182bf54d7774c6f823af25e679a598f3ff klog=0x7ff00000 klog_len=0x100000 boardtype=topaz-Wifi-pvt lastboot=reboot <6>[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) <6>[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) <6>[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) <6>[ 0.000000] Memory: 101MB 740MB = 841MB total <5>[ 0.000000] Memory: 839364k/839364k available, 171324k reserved, 0K highmem <5>[ 0.000000] Virtual kernel memory layout: <5>[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) <5>[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) <5>[ 0.000000] vmalloc : 0xbf800000 - 0xff000000 (1016 MB) <5>[ 0.000000] lowmem : 0x80000000 - 0xbf400000 (1012 MB) <5>[ 0.000000] pkmap : 0x7fe00000 - 0x80000000 ( 2 MB) <5>[ 0.000000] .text : 0x80008000 - 0x808d1b3c (8999 kB) <5>[ 0.000000] .init : 0x808d2000 - 0x80915f40 ( 272 kB) <5>[ 0.000000] .data : 0x80916000 - 0x809df4b0 ( 806 kB) <5>[ 0.000000] .bss : 0x809df4d4 - 0x80c4f8e8 (2498 kB) <6>[ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 <6>[ 0.000000] Preemptible hierarchical RCU implementation. <6>[ 0.000000] NR_IRQS:855 <6>[ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms <6>[ 0.000000] Switching to timer-based delay loop <7>[ 0.000000] ODEBUG: 2 of 2 active objects replaced <6>[ 0.001922] Calibrating delay loop (skipped), value calculated using timer frequency.. 13.50 BogoMIPS (lpj=67500) <6>[ 0.001953] pid_max: default: 32768 minimum: 301 <6>[ 0.002258] Security Framework initialized <6>[ 0.002288] SELinux: Initializing. <7>[ 0.002380] SELinux: Starting in permissive mode <6>[ 0.002502] Mount-cache hash table entries: 512 <6>[ 0.004272] Initializing cgroup subsys cpuacct <6>[ 0.004302] Initializing cgroup subsys freezer <6>[ 0.004364] CPU: Testing write buffer coherency: ok <6>[ 0.004669] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 <6>[ 0.004699] hw perfevents: enabled with ARMv7 Scorpion-MP PMU driver, 5 counters available <6>[ 0.004852] Setting up static identity map for 0x408800c8 - 0x4088012c <6>[ 0.036804] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 <6>[ 0.036956] Brought up 2 CPUs <6>[ 0.036987] SMP: Total of 2 processors activated (27.00 BogoMIPS). <6>[ 0.056945] dummy: <6>[ 0.057586] NET: Registered protocol family 16 <6>[ 0.058624] DMA: preallocated 256 KiB pool for atomic coherent allocations <3>[ 0.058837] AXI: msm_bus_fabric_init_driver(): msm_bus_fabric_init_driver <6>[ 0.060180] meminfo_init: smem ram ptable found: ver: 0 len: 7 <6>[ 0.060211] Found 2 memory banks grouped into 16 memory regions <6>[ 0.060516] gpiochip_add: registered GPIOs 0 to 172 on device: msmgpio <6>[ 0.061614] msm_tsens_early_init: done <6>[ 0.061645] msm_rpm_init: RPM firmware 2.0.67653 <1>[ 0.061828] Choosing tenderloin_pins_wifi <3>[ 0.093994] msm_rpm_get_status(): Status id 433 not defined for target <3>[ 0.123535] tenderloin_init_gpiomux: >= TOPAZ_DVT <6>[ 0.124938] saw_probe: id=0, name=8901_s0 <6>[ 0.125549] saw_probe: id=1, name=8901_s1 <6>[ 0.132843] pm8058_probe: PMIC revision: E3 <6>[ 0.135131] gpiochip_add: registered GPIOs 173 to 212 on device: pm-gpio <6>[ 0.135589] pm_gpio_probe: OK: base=173, ngpio=40 <6>[ 0.135955] gpiochip_add: registered GPIOs 213 to 224 on device: pm8xxx-mpp <6>[ 0.136047] pm8xxx_mpp_probe: OK: base=213, ngpio=12 <6>[ 0.139038] pm8901_probe: PMIC revision reg: F4 <6>[ 0.139038] pm8901_probe: PMIC version: PM8901 rev 2.1 <6>[ 0.140014] gpiochip_add: registered GPIOs 225 to 228 on device: pm8xxx-mpp <6>[ 0.140045] pm8xxx_mpp_probe: OK: base=225, ngpio=4 <3>[ 0.145446] Registering a6_0 device. <3>[ 0.145507] Registering a6_1 device. <7>[ 0.147064] tenderloin_init_keypad <3>[ 0.147399] tenderloin_init: -- <6>[ 0.147430] hw-breakpoint: found 3 (+1 reserved) breakpoint and 1 watchpoint registers. <6>[ 0.147460] hw-breakpoint: maximum watchpoint size is 8 bytes. <6>[ 0.191589] bio: create slab at 0 <7>[ 0.193084] reg-fixed-voltage reg-fixed-voltage.0: vdd50_boost supplying 5000000uV <6>[ 0.195251] ION heap vmalloc created <6>[ 0.195373] ION heap mm created at 38200000 with size 6600000 <6>[ 0.195404] ION heap mm_fw created at 38000000 with size 200000 <6>[ 0.195495] ION heap mfc created at 3e800000 with size 2000 <6>[ 0.195770] ION heap sf created at 76401000 with size 4000000 <6>[ 0.196044] ION heap camera_preview created at 7a401000 with size 4200000 <6>[ 0.196136] ION heap audio created at 7e601000 with size 4cf000 <5>[ 0.196411] pmic8058_pwm_probe: OK <6>[ 0.196533] klog_init: phys buffer at 0x7ff00000 <6>[ 0.196624] klog_init: virt address at 0xbfe00000 <6>[ 0.196655] klog_init: found valid klog, len 1048576 <6>klog_init: using buffer 1 at 0xbfe40018, length 262116 <6>klog_init: last_klog head=51889 tail=0 size=51889 <6>klog_init: last_klog2 head=20457 tail=0 size=20457 <6>klog_init: last_klog3 head=30556 tail=0 size=30556 <5>SCSI subsystem initialized <6>usbcore: registered new interface driver usbfs <6>usbcore: registered new interface driver hub <6>usbcore: registered new device driver usb <6>input: pmic8xxx_pwrkey as /devices/platform/msm_ssbi.0/pm8058-core/pm8xxx-pwrkey/input/input0 <6>Advanced Linux Sound Architecture Driver Version 1.0.25. <6>Bluetooth: Core ver 2.16 <6>NET: Registered protocol family 31 <6>Bluetooth: HCI device and connection manager initialized <6>Bluetooth: HCI socket layer initialized <6>Bluetooth: L2CAP socket layer initialized <6>Bluetooth: SCO socket layer initialized <6>cfg80211: Calling CRDA to update world regulatory domain <6>Switching to clocksource gp_timer <6>NET: Registered protocol family 2 <6>IP route cache hash table entries: 32768 (order: 5, 131072 bytes) <6>TCP established hash table entries: 131072 (order: 8, 1048576 bytes) <6>TCP bind hash table entries: 65536 (order: 8, 1310720 bytes) <6>TCP: Hash tables configured (established 131072 bind 65536) <6>TCP: reno registered <6>UDP hash table entries: 512 (order: 2, 24576 bytes) <6>UDP-Lite hash table entries: 512 (order: 2, 24576 bytes) <6>NET: Registered protocol family 1 <6>RPC: Registered named UNIX socket transport module. <6>RPC: Registered udp transport module. <6>RPC: Registered tcp transport module. <6>RPC: Registered tcp NFSv4.1 backchannel transport module. <6>Trying to unpack rootfs image as initramfs... <6>Freeing initrd memory: 376K <6>Detected 5 counters on the L2CC PMU. <6>pil_qdsp6v3 pil_qdsp6v3: using non-secure boot <3>smd_channel_probe_worker: allocation table not initialized <6>snddev_icodec_probe: msm_codec_i2s_slave_mode = 0 <4>8058_s4: Failed to create debugfs directory <6>dspcrashd_probe: Platform driver values: Base = 0x46700000, Size = 0x2000000,pdata = 0xdeaddead <6>Max ACPU freq: 1512000 KHz <4>8901_s0: Failed to create debugfs directory <4>8901_s1: Failed to create debugfs directory <6>CPU0: 23 scaling frequencies supported. <6>CPU1: 23 scaling frequencies supported. <6>audit: initializing netlink socket (disabled) <5>type=2000 audit(0.240:1): initialized <6>NTFS driver 2.1.30 [Flags: R/W]. <6>fuse init (API version 7.18) <6>msgmni has been set to 1640 <7>SELinux: Registering netfilter hooks <6>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) <6>io scheduler noop registered <6>io scheduler deadline registered <6>io scheduler row registered (default) <6>io scheduler cfq registered <6> msm_vidc_enc: Inside vid_enc_init()<6> msm_vidc_enc: Inside vid_enc_vcd_init()<6>msm_serial_hs module loaded <6>[BT]msm_serial_hs module loaded <6>msm_serial_hsl: detected port #0 <6>msm_serial_hsl.0: ttyHSL0 at MMIO 0x19c40000 (irq = 227) is a MSM <6>msm_serial_hsl: driver initialized <6>msm_rotator_probe: rotator_hw_revision=1 <6>kgsl kgsl-3d0: |kgsl_gpummu_init| MMU type set for device is GPUMMU <6>kgsl kgsl-2d0: |kgsl_gpummu_init| MMU type set for device is GPUMMU <6>kgsl kgsl-2d1: |kgsl_gpummu_init| MMU type set for device is GPUMMU <6>brd: module loaded <6>loop: module loaded <6>lkdtm: No crash points registered, enable through debugfs <6>pmem: Initializing pmem_adsp as non-cached <3>pmem: Cannot allocate from reserved memory for pmem_adsp <4>android_pmem: probe of android_pmem.2 failed with error -1 <6>pmem: Initializing pmem_audio as non-cached <6>allocating 5042176 bytes at 7ead0000 physical for pmem_audio <4>8058_l18: Failed to create debugfs directory <6>Before a6 call to i2c_add_driver. <3>a6_init_state: enabling A6 internal wake. <3>a6_init_state: TS2_I2C_WAKEUP_PERIOD = 0x1b <6>A6 Version: HW: 255, FW (M.m.B): 2.13.25, ManID: 28769, ProdTyp: 1281 <5>A6 driver initialized successfully! <3>a6_init_state: enabling A6 internal wake. <3>a6_init_state: TS2_I2C_WAKEUP_PERIOD = 0x1b <6>A6 Version: HW: 255, FW (M.m.B): 2.7.29, ManID: 28769, ProdTyp: 1793 <5>A6 driver initialized successfully! <4>i2c-core: driver [a6] using legacy suspend method <4>i2c-core: driver [a6] using legacy resume method <6>nduid: a73588182bf54d7774c6f823af25e679a598f3ff <3>hsuart_rxtx_lists_init: init 80b3eae4 <3>hsuart_rxtx_lists_init: init 80b3eb18 hsuart_tty:created 'ttyHS0' device on UART 0 mdmgpio_init mdmgpio_probe <3>msm_wm8958_setup_power: codec power setup <4>vdd50_boost: Failed to create debugfs directory <4>8058_s3: Failed to create debugfs directory <3>wm8994_ldo_power: Power up the WM8994 LDOs <6>wm8994 4-001a: WM8958 revision B <4>wm8994 4-001a: No interrupt specified, no interrupts <7>gpiochip_find_base: found new base at 501 <6>gpiochip_add: registered GPIOs 501 to 511 on device: wm8994 <6>SCSI Media Changer driver v0.25 <6>tun: Universal TUN/TAP device driver, 1.6 <6>tun: (C) 1999-2004 Max Krasnyansky <6>PPP generic driver version 2.4.2 <6>PPP BSD Compression module registered <6>PPP Deflate Compression module registered <6>PPP MPPE Compression module registered <6>NET: Registered protocol family 24 <6>SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled). <6>CSLIP: code copyright 1989 Regents of the University of California. <3>board_sdio_wifi_enable <4>8058_s3: Failed to create debugfs directory <4>8901_l3: Failed to create debugfs directory <4>8901_l1: Failed to create debugfs directory <4>8058_l19: Failed to create debugfs directory <6>wifi_power(1) 1.8V sdio: set load <6>tenderloin_wifi_power: New regulator mode for 8058_s3: 2 <6>wifi_power(1) 3.3V <6>wifi_power(1) 8901_l1 3.3V <6>wifi_power(1) 8058_l19 1.8V wifi_power(1) CHIP_PWD <4>8058_s1: Failed to create debugfs directory <4>8058_l6: Failed to create debugfs directory <4>8058_l7: Failed to create debugfs directory <6>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver <3>Rate 2147483647 for jpegd_clk is greater than highest Fmax <6>host driver registered w/ tranceiver <6>usbcore: registered new interface driver cdc_acm <6>cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters <6>usbcore: registered new interface driver cdc_wdm <6>Initializing USB Mass Storage driver... <6>usbcore: registered new interface driver usb-storage <6>USB Mass Storage support registered. <6>usbcore: registered new interface driver ums-alauda <6>usbcore: registered new interface driver ums-cypress <6>usbcore: registered new interface driver ums-datafab <6>usbcore: registered new interface driver ums-freecom <6>usbcore: registered new interface driver ums-isd200 <6>usbcore: registered new interface driver ums-jumpshot <6>usbcore: registered new interface driver ums-karma <6>usbcore: registered new interface driver ums-onetouch <6>usbcore: registered new interface driver ums-sddr09 <6>usbcore: registered new interface driver ums-sddr55 <6>usbcore: registered new interface driver ums-usbat <6>usbcore: registered new interface driver usbserial <6>usbserial: USB Serial Driver core <6>usbcore: registered new interface driver usb_ehset_test <6>peripheral driver registered w/ tranceiver <6>mbim_init: initialize 1 instances <6>mbim_init: Initialized 1 ports <6>rndis_qc_init: initialize rndis QC instance <6>android_usb gadget: Mass Storage Function, version: 2009/09/11 <6>android_usb gadget: Number of LUNs=1 <6> lun0: LUN: removable file: (no medium) <6>android_usb gadget: android_usb ready <4>8058_l10: Failed to create debugfs directory <4>vdd50_boost: Failed to create debugfs directory <6>GPIO Input Driver: Start gpio inputs for tenderloin-keypad in interrupt mode <3>ulpi_read: timeout 48300000 <6>gpio_keys_scan_keys: key 1-73, 0 (103) changed to 0 <6>gpio_keys_scan_keys: key 1-72, 1 (104) changed to 0 <6>gpio_keys_scan_keys: key 1-ac, 2 (40) changed to 0 <6>input: tenderloin-keypad as /devices/virtual/input/input1 <6>i2c i2c-0: mpu3050: +lsm303dlha <6>i2c i2c-0: mpu3050: +lsm303dlhm <4>i2c i2c-0: WARNING: Compass irq not assigned <4>i2c i2c-0: mpu3050: No Pressure Present <4>ODEBUG: object is on stack, but not annotated <4>------------[ cut here ]------------ <4>WARNING: at ../../../../../../kernel/htc/msm8960/lib/debugobjects.c:302 __debug_object_init+0x2b0/0x36c() [<80014c60>] (unwind_backtrace+0x0/0x11c) from [<80078188>] (warn_slowpath_common+0x48/0x60) [<80078188>] (warn_slowpath_common+0x48/0x60) from [<80078258>] (warn_slowpath_null+0x18/0x1c) [<80078258>] (warn_slowpath_null+0x18/0x1c) from [<8027be10>] (__debug_object_init+0x2b0/0x36c) [<8027be10>] (__debug_object_init+0x2b0/0x36c) from [<80095758>] (hrtimer_init+0x18/0x30) [<80095758>] (hrtimer_init+0x18/0x30) from [<80082ae4>] (do_nsleep+0x2c/0xf0) [<80082ae4>] (do_nsleep+0x2c/0xf0) from [<80083f84>] (hr_msleep+0x14/0x1c) [<80083f84>] (hr_msleep+0x14/0x1c) from [<8041032c>] (MLDLPowerMgmtMPU+0x19c/0x4c4) [<8041032c>] (MLDLPowerMgmtMPU+0x19c/0x4c4) from [<80411b20>] (mpu3050_open+0xa4/0x4bc) [<80411b20>] (mpu3050_open+0xa4/0x4bc) from [<8040e45c>] (mpu3050_probe+0x3a0/0x6c8) [<8040e45c>] (mpu3050_probe+0x3a0/0x6c8) from [<8041b784>] (i2c_device_probe+0x98/0xc8) [<8041b784>] (i2c_device_probe+0x98/0xc8) from [<8031f228>] (driver_probe_device+0x138/0x33c) [<8031f228>] (driver_probe_device+0x138/0x33c) from [<8031f494>] (__driver_attach+0x68/0x8c) [<8031f494>] (__driver_attach+0x68/0x8c) from [<8031d9d8>] (bus_for_each_dev+0x50/0x88) [<8031d9d8>] (bus_for_each_dev+0x50/0x88) from [<8031e1a0>] (bus_add_driver+0xf0/0x25c) [<8031e1a0>] (bus_add_driver+0xf0/0x25c) from [<8031fc54>] (driver_register+0x9c/0x120) [<8031fc54>] (driver_register+0x9c/0x120) from [<8041c54c>] (i2c_register_driver+0xac/0xd8) [<8041c54c>] (i2c_register_driver+0xac/0xd8) from [<808f5264>] (mpu_init+0x10/0x60) [<808f5264>] (mpu_init+0x10/0x60) from [<808d2b04>] (do_one_initcall+0x90/0x160) [<808d2b04>] (do_one_initcall+0x90/0x160) from [<808d2cc8>] (kernel_init+0xf4/0x1b8) [<808d2cc8>] (kernel_init+0xf4/0x1b8) from [<8000f5f4>] (kernel_thread_exit+0x0/0x8) <4>---[ end trace 8e42374ae981ba94 ]--- <6>i2c i2c-0: Installing irq using 381 <6>i2c i2c-0: Module Param interface = mpuirq <4>i2c-core: driver [mpu3050] using legacy suspend method <4>i2c-core: driver [mpu3050] using legacy resume method <7>mpu_init <6><6>lsm303dlh magnetometer driver <3>lsm303dlh_mag_sysfs: probe start <6>input: lsm303dlh_mag_sysfs as /devices/i2c-0/0-001e/input/input2 <6>lsm303dlh_mag_sysfs 0-001e: lsm303dlh_mag probed <7>lsm303dlh_acc_sysfs accelerometer driver: init <6>lsm303dlh_acc_sysfs: probe start. <6>lsm303dlh_acc_sysfs: hw init start <6>lsm303dlh_acc_sysfs: hw init done <6>input: lsm303dlh_acc_sysfs as /devices/i2c-0/0-0018/input/input3 <6>lsm303dlh_acc_sysfs 0-0018: lsm303dlh_acc_sysfs: probed <4>i2c-core: driver [lsm303dlh_acc_sysfs] using legacy suspend method <4>i2c-core: driver [lsm303dlh_acc_sysfs] using legacy resume method <4>------------[ cut here ]------------ <4>WARNING: at ../../../../../../kernel/htc/msm8960/lib/debugobjects.c:262 debug_print_object+0x94/0xbc() <3>ODEBUG: assert_init not available (active state 0) object type: timer_list hint: stub_timer+0x0/0x10 [<80014c60>] (unwind_backtrace+0x0/0x11c) from [<80078188>] (warn_slowpath_common+0x48/0x60) [<80078188>] (warn_slowpath_common+0x48/0x60) from [<800781f8>] (warn_slowpath_fmt+0x2c/0x3c) [<800781f8>] (warn_slowpath_fmt+0x2c/0x3c) from [<8027ba80>] (debug_print_object+0x94/0xbc) [<8027ba80>] (debug_print_object+0x94/0xbc) from [<8027c3b4>] (debug_object_assert_init+0xac/0xd4) [<8027c3b4>] (debug_object_assert_init+0xac/0xd4) from [<800837c8>] (del_timer+0x14/0xb4) [<800837c8>] (del_timer+0x14/0xb4) from [<8008cda0>] (__cancel_work_timer+0x20/0x10c) [<8008cda0>] (__cancel_work_timer+0x20/0x10c) from [<80415cf0>] (isl29023_set_power_state+0x70/0x78) [<80415cf0>] (isl29023_set_power_state+0x70/0x78) from [<8066f72c>] (isl29023_probe+0x188/0x370) [<8066f72c>] (isl29023_probe+0x188/0x370) from [<8041b784>] (i2c_device_probe+0x98/0xc8) [<8041b784>] (i2c_device_probe+0x98/0xc8) from [<8031f228>] (driver_probe_device+0x138/0x33c) [<8031f228>] (driver_probe_device+0x138/0x33c) from [<8031f494>] (__driver_attach+0x68/0x8c) [<8031f494>] (__driver_attach+0x68/0x8c) from [<8031d9d8>] (bus_for_each_dev+0x50/0x88) [<8031d9d8>] (bus_for_each_dev+0x50/0x88) from [<8031e1a0>] (bus_add_driver+0xf0/0x25c) [<8031e1a0>] (bus_add_driver+0xf0/0x25c) from [<8031fc54>] (driver_register+0x9c/0x120) [<8031fc54>] (driver_register+0x9c/0x120) from [<8041c54c>] (i2c_register_driver+0xac/0xd8) [<8041c54c>] (i2c_register_driver+0xac/0xd8) from [<808d2b04>] (do_one_initcall+0x90/0x160) [<808d2b04>] (do_one_initcall+0x90/0x160) from [<808d2cc8>] (kernel_init+0xf4/0x1b8) [<808d2cc8>] (kernel_init+0xf4/0x1b8) from [<8000f5f4>] (kernel_thread_exit+0x0/0x8) <4>---[ end trace 8e42374ae981ba95 ]--- <6>input: isl29023 light sensor as /devices/virtual/input/input4 isl29023 input_dev success <6>isl29023 0-0044: driver version 1.0 enabled <4>i2c-core: driver [isl29023] using legacy suspend method <4>i2c-core: driver [isl29023] using legacy resume method <6>using rtc device, pm8xxx_rtc, for alarms<6>rtc-pm8xxx rtc-pm8xxx: rtc core: registered pm8xxx_rtc as rtc0 <6>i2c /dev entries driver <6>lirc_dev: IR Remote Control driver registered, major 240 <6>IR RC5 (streamzap) protocol handler initialized <6>IR SANYO protocol handler initialized <6>IR MCE Keyboard/mouse protocol handler initialized <6>IR LIRC bridge handler initialized <6>Linux video capture interface: v2.00 +++ config_camera_on_gpios_web_cam_mt9m113 <4>8058_lvs0: Failed to create debugfs directory config_camera_on_gpios_web_cam_mt9m113:enable the regulator votg_lvs0 succeed <4>8058_l11: Failed to create debugfs directory config_camera_on_gpios_web_cam_mt9m113:enable the regulator votg_vreg_l11 succeed --- config_camera_on_gpios_web_cam_mt9m113 <4>fs_vfe: Failed to create debugfs directory <3>ulpi_read: timeout 48300000 +++ config_camera_off_gpios_web_cam_mt9m113 config_camera_off_gpios_web_cam_mt9m113:disable the regulator: votg_lvs0 succeed config_camera_off_gpios_web_cam_mt9m113:disable the regulator: votg_vreg_l11 succeed --- config_camera_off_gpios_web_cam_mt9m113 <6>msm_sync_init: initialized mt9m113 <6>max8903b driver registeration! rc = 0 <6>msm_adc successfully registered <5>tsens_tm_init: OK <6>device-mapper: uevent: version 1.0.3 <6>device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com <6>device-mapper: multipath: version 1.3.0 loaded <6>device-mapper: multipath round-robin: version 1.0.0 loaded <6>device-mapper: multipath queue-length: version 0.1.0 loaded <6>device-mapper: multipath service-time: version 0.2.0 loaded <6>cpuidle: using governor ladder <6>cpuidle: using governor menu <6>mmc0: SDCC Version: 0x00000000 <3>mmc0: No card detect facilities available <4>8901_l5: Failed to create debugfs directory <4>8901_lvs0: Failed to create debugfs directory <6>mmc0: Qualcomm MSM SDCC-core at 0x0000000012400000 irq 136,0 dma 18 dmacrcri 1 <6>mmc0: Controller capabilities: 0x00000001 <6>mmc0: 8 bit data mode enabled <6>mmc0: 4 bit data mode disabled <6>mmc0: polling status mode disabled <6>mmc0: MMC clock 400000 -> 48000000 Hz, PCLK 0 Hz <6>mmc0: Slot eject status = 0 <6>mmc0: Power save feature enable = 1 <6>mmc0: DM non-cached buffer at bf8e6000, dma_addr 0x74860000 <6>mmc0: DM cmd busaddr 0x74860000, cmdptr busaddr 0x74877f40 <6>mmc1: SDCC Version: 0x00000000 <3>mmc1: No card detect facilities available <4>8058_s3: Failed to create debugfs directory <6>mmc1: Qualcomm MSM SDCC-core at 0x00000000121c0000 irq 133,0 dma 21 dmacrcri 5 <6>mmc1: Controller capabilities: 0x00000001 <6>mmc1: 8 bit data mode disabled <6>mmc1: 4 bit data mode enabled <6>mmc1: polling status mode disabled <6>mmc1: MMC clock 400000 -> 48000000 Hz, PCLK 0 Hz <6>mmc1: Slot eject status = 0 <6>mmc1: Power save feature enable = 1 <6>mmc1: DM non-cached buffer at bfb01000, dma_addr 0x74880000 <6>mmc1: DM cmd busaddr 0x74880000, cmdptr busaddr 0x74897f40 tenderloin_probe_wifi: id 4 mmc b4648000 <3>board_sdio_wifi_enable <7>LM8502 module init called <7>LM8502 probe called <3>ulpi_read: timeout 48300000 <3>ulpi_read: timeout 48300000 <6>mmc0: disabling BKOPS <6>mmc0: new high speed MMC card at address 0001 <6>mmcblk0: mmc0:0001 SEM32G 29.7 GiB <3>qup_i2c qup_i2c.3: QUP: I2C status flags :0x1343c8, irq:193 <3>qup_i2c qup_i2c.3: I2C slave addr:0x33 not connected <3>Unable to read LM8502 registers <6> mmcblk0: p1 p2 p3 p4 < p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 > <7>Registered led device: core_navi_left <7>Registered led device: core_navi_right <4>i2c-core: driver [LM8502] using legacy suspend method <4>i2c-core: driver [LM8502] using legacy resume method <6>usbcore: registered new interface driver usbhid <6>usbhid: USB HID core driver <6>ashmem: initialized <6>logger: created 256K log 'log_main' <6>logger: created 256K log 'log_events' <6>logger: created 256K log 'log_radio' <6>logger: created 256K log 'log_system' <6>msm-cpu-dai msm-cpu-dai.0: asoc_msm_cpu_probe: dev name msm-cpu-dai.0 <6>msm-codec-dai msm-codec-dai.0: asoc_msm_codec_probe: dev name msm-codec-dai.0 <6>msm-dsp-audio msm-dsp-audio.0: msm_pcm_probe: dev name msm-dsp-audio.0 <3>msm_wm8958_shutdown_power: codec power shutdown <4>vdd50_boost: Failed to create debugfs directory <3>wm8994_ldo_power: Power down the WM8994 LDOs <6>asoc: wm8994-aif1 <-> msm-cpu-dai.0 mapping ok <6>asoc: wm8994-aif2 <-> msm-cpu-dai.0 mapping ok <6>input: msm-audio headset as /devices/platform/soc-audio/sound/card0/input5 <6>GACT probability NOT on <6>Mirror/redirect action on Failed to load ipt action <6>u32 classifier <6> Performance counters on <6> input device check on <6> Actions configured <6>Netfilter messages via NETLINK v0.30. <6>nf_conntrack version 0.5.0 (13120 buckets, 52480 max) <6>ctnetlink v0.93: registering with nfnetlink. <6>NF_TPROXY: Transparent proxy support initialized, version 4.1.0 <6>NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd. <6>xt_time: kernel timezone is -0000 <6>ip_tables: (C) 2000-2006 Netfilter Core Team <6>arp_tables: (C) 2002 David S. Miller <6>TCP: cubic registered <6>NET: Registered protocol family 10 <6>Mobile IPv6 <6>ip6_tables: (C) 2000-2006 Netfilter Core Team <6>IPv6 over IPv4 tunneling driver <6>NET: Registered protocol family 17 <6>NET: Registered protocol family 15 <3>ulpi_read: timeout 48300000 <6>Bluetooth: RFCOMM TTY layer initialized <6>Bluetooth: RFCOMM socket layer initialized <6>Bluetooth: RFCOMM ver 1.11 <6>Bluetooth: BNEP (Ethernet Emulation) ver 1.3 <6>Bluetooth: HIDP (Human Interface Emulation) ver 1.2 <6>L2TP core driver, V2.0 <6>PPPoL2TP kernel driver, V2.0 <6>L2TP IP encapsulation support (L2TPv3) <6>L2TP netlink interface <6>L2TP ethernet pseudowire support (L2TPv3) <3>lcdc_tenderloin_panel_init: +++++++++++++++++++++++ <3>lcdc_tenderloin_probe: ++ <6>Lcdc_tenderloin_probe: bl_pwm0=b5bddc00 LPG_chan0=0 <6>setting pdata->panel_info.fb_num to 3. type: 3 <4>------------[ cut here ]------------ <4>WARNING: at ../../../../../../kernel/htc/msm8960/arch/arm/mach-msm/clock-local.c:424 rcg_clk_prepare+0x2c/0x48() Attempting to prepare pixel_mdp_clk before setting its rate. Set the rate first! [<80014c60>] (unwind_backtrace+0x0/0x11c) from [<80078188>] (warn_slowpath_common+0x48/0x60) [<80078188>] (warn_slowpath_common+0x48/0x60) from [<800781f8>] (warn_slowpath_fmt+0x2c/0x3c) [<800781f8>] (warn_slowpath_fmt+0x2c/0x3c) from [<80059c40>] (rcg_clk_prepare+0x2c/0x48) [<80059c40>] (rcg_clk_prepare+0x2c/0x48) from [<800208b8>] (clk_prepare+0x94/0xe0) [<800208b8>] (clk_prepare+0x94/0xe0) from [<802ab490>] (cont_splash_clk_ctrl.part.0+0x14/0x74) [<802ab490>] (cont_splash_clk_ctrl.part.0+0x14/0x74) from [<802ab738>] (lcdc_probe+0xc4/0x1fc) [<802ab738>] (lcdc_probe+0xc4/0x1fc) from [<803205ac>] (platform_drv_probe+0x14/0x18) [<803205ac>] (platform_drv_probe+0x14/0x18) from [<8031f228>] (driver_probe_device+0x138/0x33c) [<8031f228>] (driver_probe_device+0x138/0x33c) from [<8031dd58>] (bus_for_each_drv+0x48/0x8c) [<8031dd58>] (bus_for_each_drv+0x48/0x8c) from [<8031f578>] (device_attach+0x7c/0xa0) [<8031f578>] (device_attach+0x7c/0xa0) from [<8031df2c>] (bus_probe_device+0x28/0x98) [<8031df2c>] (bus_probe_device+0x28/0x98) from [<8031c5a8>] (device_add+0x3f4/0x5a8) [<8031c5a8>] (device_add+0x3f4/0x5a8) from [<80320aa8>] (platform_device_add+0x12c/0x19c) [<80320aa8>] (platform_device_add+0x12c/0x19c) from [<80295a70>] (msm_fb_add_device+0x154/0x1b0) [<80295a70>] (msm_fb_add_device+0x154/0x1b0) from [<80663e9c>] (lcdc_tenderloin_probe+0x78/0x98) [<80663e9c>] (lcdc_tenderloin_probe+0x78/0x98) from [<803205ac>] (platform_drv_probe+0x14/0x18) [<803205ac>] (platform_drv_probe+0x14/0x18) from [<8031f228>] (driver_probe_device+0x138/0x33c) [<8031f228>] (driver_probe_device+0x138/0x33c) from [<8031dd58>] (bus_for_each_drv+0x48/0x8c) [<8031dd58>] (bus_for_each_drv+0x48/0x8c) from [<8031f578>] (device_attach+0x7c/0xa0) [<8031f578>] (device_attach+0x7c/0xa0) from [<8031df2c>] (bus_probe_device+0x28/0x98) [<8031df2c>] (bus_probe_device+0x28/0x98) from [<8031c5a8>] (device_add+0x3f4/0x5a8) [<8031c5a8>] (device_add+0x3f4/0x5a8) from [<80320aa8>] (platform_device_add+0x12c/0x19c) [<80320aa8>] (platform_device_add+0x12c/0x19c) from [<80064440>] (lcdc_tenderloin_device_register+0x7c/0xc8) [<80064440>] (lcdc_tenderloin_device_register+0x7c/0xc8) from [<808de498>] (lcdc_tenderloin_panel_init+0xa8/0xd8) [<808de498>] (lcdc_tenderloin_panel_init+0xa8/0xd8) from [<808d2b04>] (do_one_initcall+0x90/0x160) [<808d2b04>] (do_one_initcall+0x90/0x160) from [<808d2cc8>] (kernel_init+0xf4/0x1b8) [<808d2cc8>] (kernel_init+0xf4/0x1b8) from [<8000f5f4>] (kernel_thread_exit+0x0/0x8) <4>---[ end trace 8e42374ae981ba96 ]--- <4>mmc1: queuing unknown CIS tuple 0x01 (3 bytes) <4>mmc1: queuing unknown CIS tuple 0x1a (5 bytes) <3>ulpi_read_with_reset: ulpi read failed for 5 times <3>ulpi_write: timeout <3>ulpi_write: timeout <6>FrameBuffer[0] 1024x768 size=9437184 bytes is registered successfully! <4>load_565rle_image: Can not open /initlogo.rle <7>Registered led device: lcd-backlight <6>mdp4_lcdc_vsync_init: ndx=0 <6>VFP support v0.3: implementor 51 architecture 64 part 2d variant 0 rev 0 <5>Registering SWP/SWPB emulation handler <6>clock_late_init: Removing enables held for handed-off clocks <4>mmc1: queuing unknown CIS tuple 0x1b (8 bytes) <4>mmc1: queuing unknown CIS tuple 0x14 (0 bytes) <4>mmc1: queuing unknown CIS tuple 0x80 (1 bytes) <4>mmc1: queuing unknown CIS tuple 0x81 (1 bytes) <4>mmc1: queuing unknown CIS tuple 0x82 (1 bytes) <6>mmc1: new high speed SDIO card at address 0001 <6>MSM Watchdog Initialized <6>[MPDEC]: msm_mpdec_init init complete.<4>8058_l5: Failed to create debugfs directory <4>8058_l5: Failed to create debugfs directory <4>8058_l5: Failed to create debugfs directory <6>rtc-pm8xxx rtc-pm8xxx: setting system clock to 2014-11-24 12:08:17 UTC (1416830897) <6>msm_v4l2: msm_v4l2_init <6>ALSA device list: <6> #0: msm-audio <4>Warning: unable to open an initial console. <6>Freeing init memory: 268K <7>SELinux: 1024 avtab hash slots, 2781 rules. <7>SELinux: 1024 avtab hash slots, 2781 rules. <7>SELinux: 1 users, 2 roles, 291 types, 1 bools, 1 sens, 1024 cats <7>SELinux: 84 classes, 2781 rules <7>SELinux: Completing initialization. <7>SELinux: Setting up existing superblocks. <7>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts <7>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts <7>SELinux: initialized (dev bdev, type bdev), not configured for labeling <7>SELinux: initialized (dev proc, type proc), uses genfs_contexts <7>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs <7>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts <7>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs <7>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs <7>SELinux: initialized (dev anon_inodefs, type anon_inodefs), not configured for labeling <7>SELinux: initialized (dev devpts, type devpts), uses transition SIDs <7>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts <7>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs <7>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts <6>msm_otg_suspend: usb in low power mode <5>type=1403 audit(1416830897.680:2): policy loaded auid=4294967295 ses=4294967295 SELinux: Loaded policy from /sepolicy <5>type=1404 audit(1416830897.690:3): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295 <3>init: could not import file 'init.power.rc' from '/init.evervolv.rc' <4>init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead. <5>type=1404 audit(1416830901.703:4): enforcing=0 old_enforcing=1 auid=4294967295 ses=4294967295 <3>init: invalid uid 'fm_radio' <3>init: invalid uid 'felicaclient' <3>init: invalid uid 'felicaclient' <3>init: invalid uid 'felicalock' <3>init: invalid uid 'felicaclient' <3>init: invalid uid 'felicaclient' <3>init: invalid uid 'felicaclient' <3>init: invalid uid 'felicaclient' <3>init: invalid uid 'felicaclient' <3>init: invalid uid 'autobot_access' <3>init: /dev/hw_random not found <7>SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts <7>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs <7>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs <7>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs <7>SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts <6>kjournald starting. Commit interval 5 seconds <4>EXT3-fs (mmcblk0p13): warning: maximal mount count reached, running e2fsck is recommended <6>EXT3-fs (mmcblk0p13): using internal journal <6>EXT3-fs (mmcblk0p13): mounted filesystem with writeback data mode <7>SELinux: initialized (dev mmcblk0p13, type ext3), uses xattr <6>EXT4-fs (dm-8): mounted filesystem with ordered data mode. Opts: barrier=1 <7>SELinux: initialized (dev dm-8, type ext4), uses xattr <6>wm8994-codec wm8994-codec: MBC timestamp 4d6e4685 <6>wm8994-codec wm8994-codec: MBC: ODM to BLOB v0.0.0 (odm2blo.pl:52679) Copyright (c) Wolfson Microelectronics plc. 2011 Wed 2 Mar 2011 13:30:45 mbc_odl.odm mbc_odl_vcp.txt <6>wm8994-codec wm8994-codec: MBC: got firmware <6>wm8994-codec wm8994-codec: MBC+VSS timestamp 4d6e6714 <6>wm8994-codec wm8994-codec: MBC+VSS: ODM to BLOB v0.0.0 (odm2blo.pl:52679) Copyright (c) Wolfson Microelectronics plc. 2011 Wed 2 Mar 2011 15:49:40 DSPPALM.odm DSPPALM_vcp.txt <6>wm8994-codec wm8994-codec: MBC+VSS: got firmware <6>wm8994-codec wm8994-codec: ENH_EQ timestamp 4d6e489e <6>wm8994-codec wm8994-codec: ENH_EQ: ODM to BLOB v0.0.0 (odm2blo.pl:52679) Copyright (c) Wolfson Microelectronics plc. 2011 Wed 2 Mar 2011 13:39:42 HP_Beats.odm HP_Beats_vcp.txt <6>wm8994-codec wm8994-codec: ENH_EQ: got firmware <3>ath6kl: temporary war to avoid sdio crc error <4>EXT4-fs (dm-10): warning: maximal mount count reached, running e2fsck is recommended <7>EXT4-fs (dm-10): ext4_orphan_cleanup: deleting unreferenced inode 526 <7>EXT4-fs (dm-10): ext4_orphan_cleanup: deleting unreferenced inode 524 <6>EXT4-fs (dm-10): 2 orphan inodes deleted <6>EXT4-fs (dm-10): recovery complete <6>EXT4-fs (dm-10): mounted filesystem with ordered data mode. Opts: barrier=1,noauto_da_alloc <7>SELinux: initialized (dev dm-10, type ext4), uses xattr <4>EXT4-fs (dm-9): warning: maximal mount count reached, running e2fsck is recommended <6>EXT4-fs (dm-9): recovery complete <6>EXT4-fs (dm-9): mounted filesystem with ordered data mode. Opts: barrier=1,noauto_da_alloc <7>SELinux: initialized (dev dm-9, type ext4), uses xattr <7>SELinux: initialized (dev fuse, type fuse), uses genfs_contexts <3>init: /dev/hw_random not found <6>ath6kl: ar6003 hw 2.1.1 sdio fw 3.2.0.144 api 3 <3>init: cannot find '/system/bin/rild', disabling 'ril-daemon' <3>healthd: wakealarm_init: timerfd_create failed <6>subsys-restart: restart_level_set(): Phase 3 behavior activated. <3>init: property 'sys.powerctl' doesn't exist while expanding '${sys.powerctl}' <3>init: powerctl: cannot expand '${sys.powerctl}' <3>init: property 'sys.sysctl.extra_free_kbytes' doesn't exist while expanding '${sys.sysctl.extra_free_kbytes}' <3>init: cannot expand '${sys.sysctl.extra_free_kbytes}' while writing to '/proc/sys/vm/extra_free_kbytes' <3>init: property 'sys.sysctl.tcp_def_init_rwnd' doesn't exist while expanding '${sys.sysctl.tcp_def_init_rwnd}' <3>init: cannot expand '${sys.sysctl.tcp_def_init_rwnd}' while writing to '/proc/sys/net/ipv4/tcp_default_init_rwnd' <3>init: service 'console' requires console <3>enable_store: android_usb: already disabled <6>mtp_bind_config <6>input: HPTouchpad as /devices/virtual/input/input6 <6>msm_release_control: control0 <6>__msm_release, open count =0 <6>__msm_release, vfe_release <6>__msm_release: draining queue pict <6>__msm_release: draining queue event <6>__msm_release: completed <6>msm_release_control: draining queue control <6>msm_release_control, completed <3>[DISP] lcdc_panel_power: ++ 1 <4>8058_l10: Failed to create debugfs directory <4>mdp4_csc_config: Block type 10 isn't supported by CSC. <4>mdp4_csc_config: Block type 8 isn't supported by CSC. <3>[DISP] lcdc_tenderloin_panel_set_backlight: 191 <6>mdp4_overlay_mdp_perf_upd mdp clk is changed [1] from 0 to 128000000 <7>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs <6>warning: `zygote' uses 32-bit capabilities (legacy support in use) <6>lsm303dlh_acc_sysfs: hw init start <6>lsm303dlh_acc_sysfs: hw init done <6>healthd: battery l=100 v=4041 t=30.0 h=2 st=5 c=-954 chg= <6>request_suspend_state: wakeup (3->0) at 38890767012 (2014-11-24 12:08:55.305193205 UTC) <6>lsm303dlh_acc_sysfs: hw init start <6>lsm303dlh_acc_sysfs: hw init done lowmem_shrink: convert oom_adj to oom_score_adj: oom_adj 0 => oom_score_adj 0 oom_adj 1 => oom_score_adj 58 oom_adj 2 => oom_score_adj 117 oom_adj 3 => oom_score_adj 176 oom_adj 9 => oom_score_adj 529 oom_adj 15 => oom_score_adj 1000 <6>EXT4-fs (dm-11): mounted filesystem without journal. Opts: (null) <7>SELinux: initialized (dev dm-11, type ext4), uses xattr <6>EXT4-fs (dm-11): re-mounted. Opts: (null) <6>EXT4-fs (dm-11): re-mounted. Opts: (null) <6>EXT4-fs (dm-12): mounted filesystem without journal. Opts: (null) <7>SELinux: initialized (dev dm-12, type ext4), uses xattr <6>EXT4-fs (dm-12): re-mounted. Opts: (null) <6>EXT4-fs (dm-12): re-mounted. Opts: (null) <6>ADDRCONF(NETDEV_UP): wlan0: link is not ready <6>acc_open <6>acc_release <6>ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready <3>[DISP] lcdc_tenderloin_panel_set_backlight: 61 <5>type=1400 audit(1416830941.551:5): avc: denied { getattr } for pid=931 comm="zygote" path="socket:[5284]" dev="sockfs" ino=5284 scontext=u:r:untrusted_app:s0 tcontext=u:r:init:s0 tclass=unix_stream_socket <5>type=1400 audit(1416830941.551:6): avc: denied { getopt } for pid=931 comm="zygote" path="/dev/socket/zygote" scontext=u:r:untrusted_app:s0 tcontext=u:r:init:s0 tclass=unix_stream_socket <5>type=1400 audit(1416830941.561:7): avc: denied { read } for pid=931 comm="re-initialized>" path=2F6465762F6173686D656D2F64616C76696B2D4C696E656172416C6C6F63202864656C6574656429 dev="tmpfs" ino=4670 scontext=u:r:untrusted_app:s0 tcontext=u:object_r:init_tmpfs:s0 tclass=file <5>type=1400 audit(1416830941.571:8): avc: denied { call } for pid=931 comm="re-initialized>" scontext=u:r:untrusted_app:s0 tcontext=u:r:init:s0 tclass=binder <3>qtaguid: iface_stat: stat_update() wlan0 not found <7>SELinux: initialized (dev dm-6, type vfat), uses genfs_contexts <7>SELinux: initialized (dev fuse, type fuse), uses genfs_contexts <5>type=1400 audit(1416830951.372:9): avc: denied { write } for pid=1351 comm=4173796E635461736B202331 path=2F6465762F6173686D656D2F6C69626674324B52462E736F202864656C6574656429 dev="tmpfs" ino=6312 scontext=u:r:untrusted_app:s0 tcontext=u:object_r:untrusted_app_tmpfs:s0 tclass=file <7>wlan0: no IPv6 routers present <6>a6_update_connected_ps: ac=0 usb=0 dock=0 <6>max8903b_current_setup: ### CHARGE_DISABLE <3>[DISP] lcdc_tenderloin_panel_set_backlight: 60 <3>[DISP] lcdc_tenderloin_panel_set_backlight: 57 <3>[DISP] lcdc_tenderloin_panel_set_backlight: 54 <3>[DISP] lcdc_tenderloin_panel_set_backlight: 51 <3>[DISP] lcdc_tenderloin_panel_set_backlight: 48 <3>[DISP] lcdc_tenderloin_panel_set_backlight: 45 <3>[DISP] lcdc_tenderloin_panel_set_backlight: 42 <3>[DISP] lcdc_tenderloin_panel_set_backlight: 39 <3>[DISP] lcdc_tenderloin_panel_set_backlight: 36 <3>[DISP] lcdc_tenderloin_panel_set_backlight: 33 <3>[DISP] lcdc_tenderloin_panel_set_backlight: 30 <3>[DISP] lcdc_tenderloin_panel_set_backlight: 27 <3>[DISP] lcdc_tenderloin_panel_set_backlight: 24 <3>[DISP] lcdc_tenderloin_panel_set_backlight: 21 <3>[DISP] lcdc_tenderloin_panel_set_backlight: 18 <3>[DISP] lcdc_tenderloin_panel_set_backlight: 15 <3>[DISP] lcdc_tenderloin_panel_set_backlight: 12 <3>[DISP] lcdc_tenderloin_panel_set_backlight: 9 <3>[DISP] lcdc_tenderloin_panel_set_backlight: 0 <3>[DISP] lcdc_panel_power: ++ 0 <6>request_suspend_state: sleep (0->3) at 86170669393 (2014-11-24 12:09:42.491034707 UTC) <6>[MPDEC]: Screen -> off. Deactivated mpdecision. <5>type=1400 audit(1416831042.401:10): avc: denied { transfer } for pid=2328 comm="eller.stdviewer" scontext=u:r:untrusted_app:s0 tcontext=u:r:init:s0 tclass=binder <5>type=1400 audit(1416831042.731:11): avc: denied { read write } for pid=2328 comm="eller.stdviewer" name="kgsl-3d0" dev="tmpfs" ino=4386 scontext=u:r:untrusted_app:s0 tcontext=u:object_r:device:s0 tclass=chr_file <5>type=1400 audit(1416831042.731:12): avc: denied { open } for pid=2328 comm="eller.stdviewer" name="kgsl-3d0" dev="tmpfs" ino=4386 scontext=u:r:untrusted_app:s0 tcontext=u:object_r:device:s0 tclass=chr_file <5>type=1400 audit(1416831042.731:13): avc: denied { ioctl } for pid=2328 comm="eller.stdviewer" path="/dev/kgsl-3d0" dev="tmpfs" ino=4386 scontext=u:r:untrusted_app:s0 tcontext=u:object_r:device:s0 tclass=chr_file <6>healthd: battery l=100 v=4080 t=29.0 h=2 st=5 c=-220 chg= <6>healthd: battery l=98 v=4075 t=29.0 h=2 st=3 c=-191 chg= <6>healthd: battery l=98 v=4080 t=29.0 h=2 st=3 c=-193 chg= <6>healthd: battery l=98 v=4080 t=28.0 h=2 st=3 c=-202 chg= <6>healthd: battery l=98 v=4080 t=28.0 h=2 st=3 c=-193 chg= <6>healthd: battery l=98 v=4080 t=28.0 h=2 st=3 c=-193 chg= <6>healthd: battery l=98 v=4080 t=28.0 h=2 st=3 c=-193 chg= <6>healthd: battery l=98 v=4080 t=28.0 h=2 st=3 c=-193 chg= <6>healthd: battery l=98 v=4075 t=28.0 h=2 st=3 c=-192 chg= <6>healthd: battery l=98 v=4075 t=28.0 h=2 st=3 c=-193 chg= <6>healthd: battery l=98 v=4075 t=28.0 h=2 st=3 c=-193 chg= <6>healthd: battery l=98 v=4075 t=27.0 h=2 st=3 c=-192 chg= <6>healthd: battery l=98 v=4075 t=27.0 h=2 st=3 c=-180 chg= <6>healthd: battery l=98 v=4075 t=27.0 h=2 st=3 c=-191 chg= <6>healthd: battery l=98 v=4075 t=27.0 h=2 st=3 c=-191 chg= <6>healthd: battery l=98 v=4070 t=27.0 h=2 st=3 c=-190 chg= <6>healthd: battery l=97 v=4070 t=27.0 h=2 st=3 c=-188 chg= <6>healthd: battery l=97 v=4070 t=27.0 h=2 st=3 c=-189 chg= <6>healthd: battery l=97 v=4070 t=27.0 h=2 st=3 c=-190 chg= <6>healthd: battery l=97 v=4070 t=27.0 h=2 st=3 c=-179 chg= <6>healthd: battery l=97 v=4070 t=27.0 h=2 st=3 c=-190 chg= <6>healthd: battery l=97 v=4070 t=27.0 h=2 st=3 c=-190 chg= <6>healthd: battery l=97 v=4065 t=26.0 h=2 st=3 c=-192 chg= <6>healthd: battery l=97 v=4065 t=26.0 h=2 st=3 c=-228 chg= <6>healthd: battery l=97 v=4065 t=26.0 h=2 st=3 c=-210 chg= <6>healthd: battery l=97 v=4060 t=26.0 h=2 st=3 c=-184 chg= <6>PM: suspend entry 2014-11-24 12:38:08.406256855 UTC Freezing user space processes ... (elapsed 0.018 seconds) done. Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. Suspending console(s) (use no_console_suspend to debug) <7>lm8502_mod_brightness: set LED2 brightness (0) percent <7>lm8502_mod_brightness: set LED1 brightness (0) percent <7>lm8502_mod_brightness: set LED1 brightness (0) percent <3>msm_wm8958_shutdown_power: Already disabled -- wm8994_reg_status = 0 <7>lm8502_mod_brightness: set LED2 brightness (0) percent max8903b_suspend: suspend <6>PM: suspend of devices complete after 32.043 msecs <6>PM: late suspend of devices complete after 2.136 msecs <6>PM: noirq suspend of devices complete after 2.960 msecs Disabling non-boot CPUs ... <6>msm_pm_enter <6>msm_pm_enter: power collapse <6>msm_mpm_irqs_detectable: cannot monitor 0000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000<6>msm_pm_enter: return <6>PM: noirq resume of devices complete after 2.166 msecs <6>wakeup wake lock: mmc1 <6>PM: early resume of devices complete after 2.136 msecs max8903b_resume: resume <3>msm_wm8958_setup_power: codec power setup <4>8058_s3: Failed to create debugfs directory <3>wm8994_ldo_power: Power up the WM8994 LDOs <7>lm8502_mod_brightness: set LED1 brightness (0) percent <7>lm8502_mod_brightness: set LED2 brightness (0) percent <7>lm8502_mod_brightness: set LED1 brightness (0) percent <7>lm8502_mod_brightness: set LED2 brightness (0) percent <6>PM: resume of devices complete after 72.759 msecs Restarting tasks ... done. <6>PM: suspend exit 2014-11-24 12:38:23.021588028 UTC <6>suspend: exit suspend, ret = 0 (2014-11-24 12:38:23.021618519 UTC) <6>active wake lock power-supply <6>PM: suspend entry 2014-11-24 12:38:23.044670587 UTC Freezing user space processes ... (elapsed 0.017 seconds) done. Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. Suspending console(s) (use no_console_suspend to debug) <7>lm8502_mod_brightness: set LED2 brightness (0) percent <7>lm8502_mod_brightness: set LED1 brightness (0) percent <7>lm8502_mod_brightness: set LED1 brightness (0) percent <7>lm8502_mod_brightness: set LED2 brightness (0) percent <3>msm_wm8958_shutdown_power: codec power shutdown <3>wm8994_ldo_power: Power down the WM8994 LDOs max8903b_suspend: suspend <6>PM: suspend of devices complete after 33.006 msecs <6>PM: late suspend of devices complete after 2.104 msecs <6>PM: noirq suspend of devices complete after 2.867 msecs Disabling non-boot CPUs ... <6>msm_pm_enter <6>msm_pm_enter: power collapse <6>msm_mpm_irqs_detectable: cannot monitor 0000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000<6>msm_pm_enter: return <6>PM: noirq resume of devices complete after 2.135 msecs <6>wakeup wake lock: mmc1 <6>PM: early resume of devices complete after 2.104 msecs max8903b_resume: resume <3>msm_wm8958_setup_power: codec power setup <4>8058_s3: Failed to create debugfs directory <3>wm8994_ldo_power: Power up the WM8994 LDOs <7>lm8502_mod_brightness: set LED1 brightness (0) percent <7>lm8502_mod_brightness: set LED2 brightness (0) percent <7>lm8502_mod_brightness: set LED1 brightness (0) percent <7>lm8502_mod_brightness: set LED2 brightness (0) percent <6>PM: resume of devices complete after 72.673 msecs Restarting tasks ... done. <6>PM: suspend exit 2014-11-24 12:38:48.023389021 UTC <6>suspend: exit suspend, ret = 0 (2014-11-24 12:38:48.023419512 UTC) <6>active wake lock power-supply <6>PM: suspend entry 2014-11-24 12:38:48.052051873 UTC Freezing user space processes ... (elapsed 0.001 seconds) done. Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. Suspending console(s) (use no_console_suspend to debug) <7>lm8502_mod_brightness: set LED2 brightness (0) percent <7>lm8502_mod_brightness: set LED1 brightness (0) percent <7>lm8502_mod_brightness: set LED1 brightness (0) percent <7>lm8502_mod_brightness: set LED2 brightness (0) percent <3>msm_wm8958_shutdown_power: codec power shutdown <3>wm8994_ldo_power: Power down the WM8994 LDOs max8903b_suspend: suspend <6>PM: suspend of devices complete after 28.305 msecs <6>PM: late suspend of devices complete after 2.135 msecs <6>PM: noirq suspend of devices complete after 2.806 msecs Disabling non-boot CPUs ... <6>msm_pm_enter <6>msm_pm_enter: power collapse <6>msm_mpm_irqs_detectable: cannot monitor 0000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000<6>msm_pm_enter: return <6>PM: noirq resume of devices complete after 2.165 msecs <6>wakeup wake lock: alarm_rtc <6>PM: early resume of devices complete after 2.135 msecs max8903b_resume: resume <3>msm_wm8958_setup_power: codec power setup <4>8058_s3: Failed to create debugfs directory <3>wm8994_ldo_power: Power up the WM8994 LDOs <7>lm8502_mod_brightness: set LED1 brightness (0) percent <7>lm8502_mod_brightness: set LED2 brightness (0) percent <7>lm8502_mod_brightness: set LED1 brightness (0) percent <7>lm8502_mod_brightness: set LED2 brightness (0) percent <6>PM: resume of devices complete after 68.218 msecs Restarting tasks ... done. <6>PM: suspend exit 2014-11-24 12:41:05.025280022 UTC <6>suspend: exit suspend, ret = 0 (2014-11-24 12:41:05.025310516 UTC) <6>active wake lock PowerManagerService.WakeLocks <6>active wake lock power-supply <6>active wake lock alarm, time left 497 <6>healthd: battery l=97 v=4075 t=26.0 h=2 st=3 c=-52 chg= <6>healthd: battery l=97 v=4070 t=26.0 h=2 st=3 c=-57 chg= <6>healthd: battery l=97 v=4070 t=26.0 h=2 st=3 c=-57 chg= <6>healthd: battery l=97 v=4056 t=26.0 h=2 st=3 c=-293 chg= <6>healthd: battery l=97 v=4056 t=26.0 h=2 st=3 c=-314 chg= <6>healthd: battery l=97 v=4056 t=26.0 h=2 st=3 c=-292 chg= <6>healthd: battery l=97 v=4056 t=26.0 h=2 st=3 c=-292 chg= <6>healthd: battery l=97 v=4051 t=26.0 h=2 st=3 c=-293 chg= <6>PM: suspend entry 2014-11-24 12:46:53.997363768 UTC Freezing user space processes ... (elapsed 0.006 seconds) done. Freezing remaining freezable tasks ... (elapsed 0.002 seconds) done. Suspending console(s) (use no_console_suspend to debug) <7>lm8502_mod_brightness: set LED2 brightness (0) percent <7>lm8502_mod_brightness: set LED1 brightness (0) percent <7>lm8502_mod_brightness: set LED1 brightness (0) percent <7>lm8502_mod_brightness: set LED2 brightness (0) percent <3>msm_wm8958_shutdown_power: codec power shutdown <3>wm8994_ldo_power: Power down the WM8994 LDOs max8903b_suspend: suspend <6>PM: suspend of devices complete after 67.291 msecs <6>PM: late suspend of devices complete after 2.197 msecs <6>PM: noirq suspend of devices complete after 2.838 msecs Disabling non-boot CPUs ... <6>msm_pm_enter <6>msm_pm_enter: power collapse <6>msm_mpm_irqs_detectable: cannot monitor 0000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000<6>msm_pm_enter: return <6>PM: noirq resume of devices complete after 2.136 msecs <6>wakeup wake lock: mmc1 <6>PM: early resume of devices complete after 2.166 msecs max8903b_resume: resume <3>msm_wm8958_setup_power: codec power setup <4>8058_s3: Failed to create debugfs directory <3>wm8994_ldo_power: Power up the WM8994 LDOs <7>lm8502_mod_brightness: set LED1 brightness (0) percent <7>lm8502_mod_brightness: set LED2 brightness (0) percent <7>lm8502_mod_brightness: set LED1 brightness (0) percent <7>lm8502_mod_brightness: set LED2 brightness (0) percent <6>PM: resume of devices complete after 73.368 msecs Restarting tasks ... done. <6>PM: suspend exit 2014-11-24 12:50:02.010642084 UTC <6>suspend: exit suspend, ret = 0 (2014-11-24 12:50:02.010672577 UTC) <6>active wake lock PowerManagerService.WakeLocks <6>active wake lock power-supply <6>healthd: battery l=97 v=4065 t=25.0 h=2 st=3 c=-44 chg= <6>PM: suspend entry 2014-11-24 12:50:02.071415162 UTC Freezing user space processes ... (elapsed 0.001 seconds) done. Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. Suspending console(s) (use no_console_suspend to debug) <7>lm8502_mod_brightness: set LED2 brightness (0) percent <7>lm8502_mod_brightness: set LED1 brightness (0) percent <7>lm8502_mod_brightness: set LED1 brightness (0) percent <7>lm8502_mod_brightness: set LED2 brightness (0) percent <3>msm_wm8958_shutdown_power: codec power shutdown <3>wm8994_ldo_power: Power down the WM8994 LDOs max8903b_suspend: suspend <6>PM: suspend of devices complete after 32.544 msecs <6>PM: late suspend of devices complete after 2.135 msecs <6>PM: noirq suspend of devices complete after 2.806 msecs Disabling non-boot CPUs ... <6>msm_pm_enter <6>msm_pm_enter: power collapse <6>msm_mpm_irqs_detectable: cannot monitor 0000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000<6>msm_pm_enter: return <6>PM: noirq resume of devices complete after 2.135 msecs <6>wakeup wake lock: mmc1 <6>PM: early resume of devices complete after 2.135 msecs max8903b_resume: resume <3>msm_wm8958_setup_power: codec power setup <4>8058_s3: Failed to create debugfs directory <3>wm8994_ldo_power: Power up the WM8994 LDOs <7>lm8502_mod_brightness: set LED1 brightness (0) percent <7>lm8502_mod_brightness: set LED2 brightness (0) percent <7>lm8502_mod_brightness: set LED1 brightness (0) percent <7>lm8502_mod_brightness: set LED2 brightness (0) percent <6>PM: resume of devices complete after 72.213 msecs Restarting tasks ... done. <6>PM: suspend exit 2014-11-24 12:51:27.010277704 UTC <6>suspend: exit suspend, ret = 0 (2014-11-24 12:51:27.010308201 UTC) <6>active wake lock PowerManagerService.WakeLocks <6>active wake lock power-supply <6>healthd: battery l=97 v=4065 t=25.0 h=2 st=3 c=-52 chg= <6>PM: suspend entry 2014-11-24 12:51:27.065716305 UTC Freezing user space processes ... (elapsed 0.003 seconds) done. Freezing remaining freezable tasks ... (elapsed 0.002 seconds) done. Suspending console(s) (use no_console_suspend to debug) <7>lm8502_mod_brightness: set LED2 brightness (0) percent <7>lm8502_mod_brightness: set LED1 brightness (0) percent <7>lm8502_mod_brightness: set LED1 brightness (0) percent <7>lm8502_mod_brightness: set LED2 brightness (0) percent <3>msm_wm8958_shutdown_power: codec power shutdown <3>wm8994_ldo_power: Power down the WM8994 LDOs max8903b_suspend: suspend <6>PM: suspend of devices complete after 49.809 msecs <6>PM: late suspend of devices complete after 2.104 msecs <6>PM: noirq suspend of devices complete after 2.928 msecs Disabling non-boot CPUs ... <6>msm_pm_enter <6>msm_pm_enter: power collapse <6>msm_mpm_irqs_detectable: cannot monitor 0000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000<6>msm_pm_enter: return <6>PM: noirq resume of devices complete after 2.135 msecs <6>wakeup wake lock: alarm_rtc <6>PM: early resume of devices complete after 2.135 msecs max8903b_resume: resume <3>msm_wm8958_setup_power: codec power setup <4>8058_s3: Failed to create debugfs directory <3>wm8994_ldo_power: Power up the WM8994 LDOs <7>lm8502_mod_brightness: set LED1 brightness (0) percent <7>lm8502_mod_brightness: set LED2 brightness (0) percent <7>lm8502_mod_brightness: set LED1 brightness (0) percent <7>lm8502_mod_brightness: set LED2 brightness (0) percent <6>PM: resume of devices complete after 69.012 msecs Restarting tasks ... done. <6>PM: suspend exit 2014-11-24 12:53:06.013082951 UTC <6>suspend: exit suspend, ret = 0 (2014-11-24 12:53:06.013113448 UTC) <6>active wake lock PowerManagerService.WakeLocks <6>active wake lock power-supply <6>healthd: battery l=97 v=4065 t=25.0 h=2 st=3 c=-53 chg= <6>PM: suspend entry 2014-11-24 12:53:06.074010119 UTC Freezing user space processes ... (elapsed 0.003 seconds) done. Freezing remaining freezable tasks ... (elapsed 0.002 seconds) done. Suspending console(s) (use no_console_suspend to debug) <7>lm8502_mod_brightness: set LED2 brightness (0) percent <7>lm8502_mod_brightness: set LED1 brightness (0) percent <7>lm8502_mod_brightness: set LED1 brightness (0) percent <7>lm8502_mod_brightness: set LED2 brightness (0) percent <3>msm_wm8958_shutdown_power: codec power shutdown <3>wm8994_ldo_power: Power down the WM8994 LDOs max8903b_suspend: suspend <6>PM: suspend of devices complete after 35.412 msecs <6>PM: late suspend of devices complete after 2.226 msecs <6>PM: noirq suspend of devices complete after 2.836 msecs Disabling non-boot CPUs ... <6>msm_pm_enter <6>msm_pm_enter: power collapse <6>msm_mpm_irqs_detectable: cannot monitor 0000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000<6>msm_pm_enter: return <6>PM: noirq resume of devices complete after 2.165 msecs <6>wakeup wake lock: alarm_rtc <6>PM: early resume of devices complete after 2.104 msecs max8903b_resume: resume <3>msm_wm8958_setup_power: codec power setup <4>8058_s3: Failed to create debugfs directory <3>wm8994_ldo_power: Power up the WM8994 LDOs <7>lm8502_mod_brightness: set LED1 brightness (0) percent <7>lm8502_mod_brightness: set LED2 brightness (0) percent <7>lm8502_mod_brightness: set LED1 brightness (0) percent <7>lm8502_mod_brightness: set LED2 brightness (0) percent <6>PM: resume of devices complete after 68.340 msecs Restarting tasks ... done. <6>PM: suspend exit 2014-11-24 13:00:37.014668794 UTC <6>suspend: exit suspend, ret = 0 (2014-11-24 13:00:37.014668794 UTC) <6>active wake lock PowerManagerService.WakeLocks <6>active wake lock event5-500 <6>active wake lock event1-500 <6>active wake lock event0-500 <6>active wake lock power-supply <6>healthd: battery l=96 v=4065 t=25.0 h=2 st=3 c=-44 chg= <6>PM: suspend entry 2014-11-24 13:00:37.097616181 UTC Freezing user space processes ... <6>active wake lock PowerManagerService.WakeLocks <3>Freezing of tasks aborted after 0.000 seconds (16 tasks refusing to freeze, wq_busy=0): Restarting tasks ... done. <6>PM: suspend exit 2014-11-24 13:00:37.209055875 UTC <6>suspend: exit suspend, ret = -16 (2014-11-24 13:00:37.209086375 UTC) <6>PM: suspend entry 2014-11-24 13:00:37.274452795 UTC Freezing user space processes ... (elapsed 0.006 seconds) done. Freezing remaining freezable tasks ... (elapsed 0.002 seconds) done. Suspending console(s) (use no_console_suspend to debug) <7>lm8502_mod_brightness: set LED2 brightness (0) percent <7>lm8502_mod_brightness: set LED1 brightness (0) percent <7>lm8502_mod_brightness: set LED1 brightness (0) percent <7>lm8502_mod_brightness: set LED2 brightness (0) percent <3>msm_wm8958_shutdown_power: codec power shutdown <3>wm8994_ldo_power: Power down the WM8994 LDOs max8903b_suspend: suspend <6>PM: suspend of devices complete after 59.544 msecs <6>PM: late suspend of devices complete after 2.135 msecs <6>PM: noirq suspend of devices complete after 2.806 msecs Disabling non-boot CPUs ... <6>msm_pm_enter <6>msm_pm_enter: power collapse <6>msm_mpm_irqs_detectable: cannot monitor 0000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000<6>msm_pm_enter: return <6>PM: noirq resume of devices complete after 2.135 msecs <6>wakeup wake lock: alarm_rtc <6>PM: early resume of devices complete after 2.135 msecs max8903b_resume: resume <3>msm_wm8958_setup_power: codec power setup <4>8058_s3: Failed to create debugfs directory <3>wm8994_ldo_power: Power up the WM8994 LDOs <7>lm8502_mod_brightness: set LED1 brightness (0) percent <7>lm8502_mod_brightness: set LED2 brightness (0) percent <7>lm8502_mod_brightness: set LED1 brightness (0) percent <7>lm8502_mod_brightness: set LED2 brightness (0) percent <6>PM: resume of devices complete after 69.988 msecs Restarting tasks ... done. <6>PM: suspend exit 2014-11-24 13:05:06.013326694 UTC <6>suspend: exit suspend, ret = 0 (2014-11-24 13:05:06.013357187 UTC) <6>healthd: battery l=96 v=4065 t=24.0 h=2 st=3 c=-44 chg= <6>PM: suspend entry 2014-11-24 13:05:06.078494123 UTC Freezing user space processes ... <6>active wake lock PowerManagerService.WakeLocks <3>Freezing of tasks aborted after 0.001 seconds (16 tasks refusing to freeze, wq_busy=0): Restarting tasks ... done. <6>PM: suspend exit 2014-11-24 13:05:06.125917787 UTC <6>suspend: exit suspend, ret = -16 (2014-11-24 13:05:06.125978778 UTC) <6>PM: suspend entry 2014-11-24 13:05:12.475848807 UTC Freezing user space processes ... (elapsed 0.004 seconds) done. Freezing remaining freezable tasks ... (elapsed 0.002 seconds) done. Suspending console(s) (use no_console_suspend to debug) <7>lm8502_mod_brightness: set LED2 brightness (0) percent <7>lm8502_mod_brightness: set LED1 brightness (0) percent <7>lm8502_mod_brightness: set LED1 brightness (0) percent <7>lm8502_mod_brightness: set LED2 brightness (0) percent <3>msm_wm8958_shutdown_power: codec power shutdown <3>wm8994_ldo_power: Power down the WM8994 LDOs max8903b_suspend: suspend <6>PM: suspend of devices complete after 61.126 msecs <6>PM: late suspend of devices complete after 2.136 msecs <6>PM: noirq suspend of devices complete after 2.838 msecs Disabling non-boot CPUs ... <6>msm_pm_enter <6>msm_pm_enter: power collapse <6>msm_mpm_irqs_detectable: cannot monitor 0000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000<6>msm_pm_enter: return <6>PM: noirq resume of devices complete after 2.197 msecs <6>wakeup wake lock: mmc1 <6>PM: early resume of devices complete after 2.136 msecs max8903b_resume: resume <3>msm_wm8958_setup_power: codec power setup <4>8058_s3: Failed to create debugfs directory <3>wm8994_ldo_power: Power up the WM8994 LDOs <7>lm8502_mod_brightness: set LED1 brightness (0) percent <7>lm8502_mod_brightness: set LED2 brightness (0) percent <7>lm8502_mod_brightness: set LED1 brightness (0) percent <7>lm8502_mod_brightness: set LED2 brightness (0) percent <6>PM: resume of devices complete after 72.287 msecs Restarting tasks ... done. <6>PM: suspend exit 2014-11-24 13:05:26.008233805 UTC <6>suspend: exit suspend, ret = 0 (2014-11-24 13:05:26.008264300 UTC) <6>active wake lock power-supply <6>PM: suspend entry 2014-11-24 13:05:26.050863563 UTC <6>healthd: battery l=96 v=4065 t=24.0 h=2 st=3 c=-42 chg= Freezing user space processes ... (elapsed 0.001 seconds) done. Freezing remaining freezable tasks ... (elapsed 0.002 seconds) done. Suspending console(s) (use no_console_suspend to debug) <7>lm8502_mod_brightness: set LED2 brightness (0) percent <7>lm8502_mod_brightness: set LED1 brightness (0) percent <7>lm8502_mod_brightness: set LED1 brightness (0) percent <7>lm8502_mod_brightness: set LED2 brightness (0) percent <3>msm_wm8958_shutdown_power: codec power shutdown <3>wm8994_ldo_power: Power down the WM8994 LDOs max8903b_suspend: suspend <6>PM: suspend of devices complete after 61.262 msecs <6>PM: late suspend of devices complete after 2.135 msecs <6>PM: noirq suspend of devices complete after 2.837 msecs Disabling non-boot CPUs ... <6>msm_pm_enter <6>msm_pm_enter: power collapse <6>msm_mpm_irqs_detectable: cannot monitor 0000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000<6>msm_pm_enter: return <6>PM: noirq resume of devices complete after 2.196 msecs <6>wakeup wake lock: mmc1 <6>PM: early resume of devices complete after 2.135 msecs max8903b_resume: resume <3>msm_wm8958_setup_power: codec power setup <4>8058_s3: Failed to create debugfs directory <3>wm8994_ldo_power: Power up the WM8994 LDOs <7>lm8502_mod_brightness: set LED1 brightness (0) percent <7>lm8502_mod_brightness: set LED2 brightness (0) percent <7>lm8502_mod_brightness: set LED1 brightness (0) percent <7>lm8502_mod_brightness: set LED2 brightness (0) percent <6>PM: resume of devices complete after 70.813 msecs Restarting tasks ... done. <6>PM: suspend exit 2014-11-24 13:05:27.007227807 UTC <6>suspend: exit suspend, ret = 0 (2014-11-24 13:05:27.007258304 UTC) <6>active wake lock power-supply <6>PM: suspend entry 2014-11-24 13:05:27.043151869 UTC <6>healthd: battery l=96 v=4065 t=24.0 h=2 st=3 c=-42 chg= Freezing user space processes ... (elapsed 0.001 seconds) done. Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. Suspending console(s) (use no_console_suspend to debug) <7>lm8502_mod_brightness: set LED2 brightness (0) percent <7>lm8502_mod_brightness: set LED1 brightness (0) percent <7>lm8502_mod_brightness: set LED1 brightness (0) percent <7>lm8502_mod_brightness: set LED2 brightness (0) percent <3>msm_wm8958_shutdown_power: codec power shutdown <3>wm8994_ldo_power: Power down the WM8994 LDOs max8903b_suspend: suspend <6>PM: suspend of devices complete after 26.536 msecs <6>PM: late suspend of devices complete after 2.287 msecs <6>PM: noirq suspend of devices complete after 2.867 msecs Disabling non-boot CPUs ... <6>msm_pm_enter <6>msm_pm_enter: power collapse <6>msm_mpm_irqs_detectable: cannot monitor 0000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000<6>msm_pm_enter: return <6>PM: noirq resume of devices complete after 2.165 msecs <6>wakeup wake lock: mmc1 <6>PM: early resume of devices complete after 2.135 msecs max8903b_resume: resume <3>msm_wm8958_setup_power: codec power setup <4>8058_s3: Failed to create debugfs directory <3>wm8994_ldo_power: Power up the WM8994 LDOs <7>lm8502_mod_brightness: set LED1 brightness (0) percent <7>lm8502_mod_brightness: set LED2 brightness (0) percent <7>lm8502_mod_brightness: set LED1 brightness (0) percent <7>lm8502_mod_brightness: set LED2 brightness (0) percent <6>PM: resume of devices complete after 72.152 msecs Restarting tasks ... done. <6>PM: suspend exit 2014-11-24 13:10:27.013905874 UTC <6>suspend: exit suspend, ret = 0 (2014-11-24 13:10:27.013905874 UTC) <6>active wake lock PowerManagerService.WakeLocks <6>active wake lock power-supply <6>healthd: battery l=96 v=4065 t=24.0 h=2 st=3 c=-43 chg= <6>PM: suspend entry 2014-11-24 13:10:27.066720720 UTC Freezing user space processes ... (elapsed 0.002 seconds) done. Freezing remaining freezable tasks ... (elapsed 0.002 seconds) done. Suspending console(s) (use no_console_suspend to debug) <7>lm8502_mod_brightness: set LED2 brightness (0) percent <7>lm8502_mod_brightness: set LED1 brightness (0) percent <7>lm8502_mod_brightness: set LED1 brightness (0) percent <7>lm8502_mod_brightness: set LED2 brightness (0) percent <3>msm_wm8958_shutdown_power: codec power shutdown <3>wm8994_ldo_power: Power down the WM8994 LDOs max8903b_suspend: suspend <6>PM: suspend of devices complete after 50.664 msecs <6>PM: late suspend of devices complete after 2.135 msecs <6>PM: noirq suspend of devices complete after 2.806 msecs Disabling non-boot CPUs ... <6>msm_pm_enter <6>msm_pm_enter: power collapse <6>msm_mpm_irqs_detectable: cannot monitor 0000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000<6>msm_pm_enter: return <6>PM: noirq resume of devices complete after 2.165 msecs <6>wakeup wake lock: mmc1 <6>PM: early resume of devices complete after 2.135 msecs max8903b_resume: resume <3>msm_wm8958_setup_power: codec power setup <4>8058_s3: Failed to create debugfs directory <3>wm8994_ldo_power: Power up the WM8994 LDOs <7>lm8502_mod_brightness: set LED1 brightness (0) percent <7>lm8502_mod_brightness: set LED2 brightness (0) percent <7>lm8502_mod_brightness: set LED1 brightness (0) percent <7>lm8502_mod_brightness: set LED2 brightness (0) percent <6>PM: resume of devices complete after 72.640 msecs Restarting tasks ... done. <6>PM: suspend exit 2014-11-24 13:10:30.007410972 UTC <6>suspend: exit suspend, ret = 0 (2014-11-24 13:10:30.007441470 UTC) <6>active wake lock power-supply <6>PM: suspend entry 2014-11-24 13:10:30.051752520 UTC <6>healthd: battery l=96 v=4065 t=24.0 h=2 st=3 c=-65 chg= Freezing user space processes ... (elapsed 0.001 seconds) done. Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. Suspending console(s) (use no_console_suspend to debug) <7>lm8502_mod_brightness: set LED2 brightness (0) percent <7>lm8502_mod_brightness: set LED1 brightness (0) percent <7>lm8502_mod_brightness: set LED1 brightness (0) percent <7>lm8502_mod_brightness: set LED2 brightness (0) percent <3>msm_wm8958_shutdown_power: codec power shutdown <3>wm8994_ldo_power: Power down the WM8994 LDOs max8903b_suspend: suspend <6>PM: suspend of devices complete after 32.668 msecs <6>PM: late suspend of devices complete after 2.257 msecs <6>PM: noirq suspend of devices complete after 2.836 msecs Disabling non-boot CPUs ... <6>msm_pm_enter <6>msm_pm_enter: power collapse <6>msm_mpm_irqs_detectable: cannot monitor 0000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000<6>msm_pm_enter: return <6>PM: noirq resume of devices complete after 2.135 msecs <6>wakeup wake lock: alarm_rtc <6>PM: early resume of devices complete after 2.104 msecs max8903b_resume: resume <3>msm_wm8958_setup_power: codec power setup <4>8058_s3: Failed to create debugfs directory <3>wm8994_ldo_power: Power up the WM8994 LDOs <7>lm8502_mod_brightness: set LED1 brightness (0) percent <7>lm8502_mod_brightness: set LED2 brightness (0) percent <7>lm8502_mod_brightness: set LED1 brightness (0) percent <7>lm8502_mod_brightness: set LED2 brightness (0) percent <6>PM: resume of devices complete after 68.768 msecs Restarting tasks ... done. <6>PM: suspend exit 2014-11-24 13:14:51.014638217 UTC <6>suspend: exit suspend, ret = 0 (2014-11-24 13:14:51.014638217 UTC) <6>active wake lock PowerManagerService.WakeLocks <6>active wake lock power-supply <6>active wake lock alarm, time left 498 <6>healthd: battery l=96 v=4065 t=24.0 h=2 st=3 c=-52 chg= <6>PM: suspend entry 2014-11-24 13:14:51.216010635 UTC Freezing user space processes ... (elapsed 0.005 seconds) done. Freezing remaining freezable tasks ... (elapsed 0.002 seconds) done. Suspending console(s) (use no_console_suspend to debug) <7>lm8502_mod_brightness: set LED2 brightness (0) percent <7>lm8502_mod_brightness: set LED1 brightness (0) percent <7>lm8502_mod_brightness: set LED1 brightness (0) percent <7>lm8502_mod_brightness: set LED2 brightness (0) percent <3>msm_wm8958_shutdown_power: codec power shutdown <3>wm8994_ldo_power: Power down the WM8994 LDOs max8903b_suspend: suspend <6>PM: suspend of devices complete after 57.292 msecs <6>PM: late suspend of devices complete after 4.484 msecs <6>PM: noirq suspend of devices complete after 5.704 msecs Disabling non-boot CPUs ... <6>msm_pm_enter <6>msm_pm_enter: power collapse <6>msm_mpm_irqs_detectable: cannot monitor 0000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000<6>msm_pm_enter: return <6>PM: noirq resume of devices complete after 4.423 msecs <6>wakeup wake lock: alarm_rtc <6>PM: early resume of devices complete after 4.362 msecs max8903b_resume: resume <3>msm_wm8958_setup_power: codec power setup <4>8058_s3: Failed to create debugfs directory <3>wm8994_ldo_power: Power up the WM8994 LDOs <7>lm8502_mod_brightness: set LED1 brightness (0) percent <7>lm8502_mod_brightness: set LED2 brightness (0) percent <7>lm8502_mod_brightness: set LED1 brightness (0) percent <7>lm8502_mod_brightness: set LED2 brightness (0) percent <6>PM: resume of devices complete after 71.848 msecs Restarting tasks ... done. <6>PM: suspend exit 2014-11-24 13:17:06.014333479 UTC <6>suspend: exit suspend, ret = 0 (2014-11-24 13:17:06.014363973 UTC) <6>healthd: battery l=96 v=4065 t=24.0 h=2 st=3 c=-41 chg= <6>PM: suspend entry 2014-11-24 13:17:06.088345523 UTC Freezing user space processes ... (elapsed 0.001 seconds) done. Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. Suspending console(s) (use no_console_suspend to debug) <7>lm8502_mod_brightness: set LED2 brightness (0) percent <7>lm8502_mod_brightness: set LED1 brightness (0) percent <7>lm8502_mod_brightness: set LED1 brightness (0) percent <7>lm8502_mod_brightness: set LED2 brightness (0) percent <3>msm_wm8958_shutdown_power: codec power shutdown <3>wm8994_ldo_power: Power down the WM8994 LDOs max8903b_suspend: suspend <6>PM: suspend of devices complete after 28.580 msecs <6>PM: late suspend of devices complete after 2.135 msecs <6>PM: noirq suspend of devices complete after 2.806 msecs Disabling non-boot CPUs ... <6>msm_pm_enter <6>msm_pm_enter: power collapse <6>msm_mpm_irqs_detectable: cannot monitor 0000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000<6>msm_pm_enter: return <6>PM: noirq resume of devices complete after 2.196 msecs <6>wakeup wake lock: alarm_rtc <6>PM: early resume of devices complete after 2.135 msecs max8903b_resume: resume <3>msm_wm8958_setup_power: codec power setup <4>8058_s3: Failed to create debugfs directory <3>wm8994_ldo_power: Power up the WM8994 LDOs <7>lm8502_mod_brightness: set LED1 brightness (0) percent <7>lm8502_mod_brightness: set LED2 brightness (0) percent <7>lm8502_mod_brightness: set LED1 brightness (0) percent <7>lm8502_mod_brightness: set LED2 brightness (0) percent <6>PM: resume of devices complete after 68.187 msecs Restarting tasks ... done. <6>PM: suspend exit 2014-11-24 13:20:43.010795688 UTC <6>suspend: exit suspend, ret = 0 (2014-11-24 13:20:43.010826181 UTC) <6>active wake lock PowerManagerService.WakeLocks <6>active wake lock power-supply <6>active wake lock alarm, time left 499 <6>healthd: battery l=96 v=4060 t=24.0 h=2 st=3 c=-43 chg= <6>PM: suspend entry 2014-11-24 13:20:43.071661174 UTC Freezing user space processes ... (elapsed 0.001 seconds) done. Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. Suspending console(s) (use no_console_suspend to debug) <7>lm8502_mod_brightness: set LED2 brightness (0) percent <7>lm8502_mod_brightness: set LED1 brightness (0) percent <3>msm_wm8958_shutdown_power: codec power shutdown <3>wm8994_ldo_power: Power down the WM8994 LDOs max8903b_suspend: suspend <6>PM: suspend of devices complete after 25.834 msecs <6>PM: late suspend of devices complete after 2.104 msecs <6>PM: noirq suspend of devices complete after 2.836 msecs Disabling non-boot CPUs ... <6>msm_pm_enter <6>msm_pm_enter: power collapse <6>msm_mpm_irqs_detectable: cannot monitor 0000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000<6>msm_pm_enter: return <6>PM: noirq resume of devices complete after 2.135 msecs <6>wakeup wake lock: alarm_rtc <6>PM: early resume of devices complete after 2.135 msecs max8903b_resume: resume <3>msm_wm8958_setup_power: codec power setup <4>8058_s3: Failed to create debugfs directory <3>wm8994_ldo_power: Power up the WM8994 LDOs <7>lm8502_mod_brightness: set LED1 brightness (0) percent <7>lm8502_mod_brightness: set LED2 brightness (0) percent <7>lm8502_mod_brightness: set LED1 brightness (0) percent <7>lm8502_mod_brightness: set LED2 brightness (0) percent <6>PM: resume of devices complete after 68.248 msecs Restarting tasks ... done. <6>PM: suspend exit 2014-11-24 13:30:01.015278376 UTC <6>suspend: exit suspend, ret = 0 (2014-11-24 13:30:01.015308869 UTC) <6>active wake lock PowerManagerService.WakeLocks <6>active wake lock event5-500 <6>active wake lock event1-500 <6>active wake lock event0-500 <6>active wake lock power-supply <6>healthd: battery l=96 v=4060 t=24.0 h=2 st=3 c=-43 chg= <6>PM: suspend entry 2014-11-24 13:30:01.120306634 UTC Freezing user space processes ... (elapsed 0.001 seconds) done. Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. Suspending console(s) (use no_console_suspend to debug) <7>lm8502_mod_brightness: set LED2 brightness (0) percent <7>lm8502_mod_brightness: set LED1 brightness (0) percent <7>lm8502_mod_brightness: set LED1 brightness (0) percent <7>lm8502_mod_brightness: set LED2 brightness (0) percent <3>msm_wm8958_shutdown_power: codec power shutdown <3>wm8994_ldo_power: Power down the WM8994 LDOs max8903b_suspend: suspend <6>PM: suspend of devices complete after 34.865 msecs <6>PM: late suspend of devices complete after 2.135 msecs <6>PM: noirq suspend of devices complete after 2.806 msecs Disabling non-boot CPUs ... <6>msm_pm_enter <6>msm_pm_enter: power collapse <6>msm_mpm_irqs_detectable: cannot monitor 0000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000<6>msm_pm_enter: return <6>PM: noirq resume of devices complete after 2.135 msecs <6>wakeup wake lock: alarm_rtc <6>PM: early resume of devices complete after 2.135 msecs max8903b_resume: resume <3>msm_wm8958_setup_power: codec power setup <4>8058_s3: Failed to create debugfs directory <3>wm8994_ldo_power: Power up the WM8994 LDOs <7>lm8502_mod_brightness: set LED1 brightness (0) percent <7>lm8502_mod_brightness: set LED2 brightness (0) percent <7>lm8502_mod_brightness: set LED1 brightness (0) percent <7>lm8502_mod_brightness: set LED2 brightness (0) percent <6>PM: resume of devices complete after 68.280 msecs Restarting tasks ... done. <6>PM: suspend exit 2014-11-24 13:37:06.012930354 UTC <6>suspend: exit suspend, ret = 0 (2014-11-24 13:37:06.012960847 UTC) <6>active wake lock PowerManagerService.WakeLocks <6>active wake lock power-supply <6>active wake lock alarm_rtc, time left 92 <6>healthd: battery l=96 v=4060 t=24.0 h=2 st=3 c=-44 chg= <6>PM: suspend entry 2014-11-24 13:37:18.271381100 UTC Freezing user space processes ... (elapsed 0.004 seconds) done. Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. Suspending console(s) (use no_console_suspend to debug) <7>lm8502_mod_brightness: set LED2 brightness (0) percent <7>lm8502_mod_brightness: set LED1 brightness (0) percent <7>lm8502_mod_brightness: set LED1 brightness (0) percent <7>lm8502_mod_brightness: set LED2 brightness (0) percent <3>msm_wm8958_shutdown_power: codec power shutdown <3>wm8994_ldo_power: Power down the WM8994 LDOs max8903b_suspend: suspend <6>PM: suspend of devices complete after 26.306 msecs <6>PM: late suspend of devices complete after 2.136 msecs <6>PM: noirq suspend of devices complete after 2.807 msecs Disabling non-boot CPUs ... <6>msm_pm_enter <6>msm_pm_enter: power collapse <6>msm_mpm_irqs_detectable: cannot monitor 0000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000<6>msm_pm_enter: return <6>PM: noirq resume of devices complete after 2.136 msecs <6>wakeup wake lock: mmc1 <6>PM: early resume of devices complete after 2.166 msecs max8903b_resume: resume <3>msm_wm8958_setup_power: codec power setup <4>8058_s3: Failed to create debugfs directory <3>wm8994_ldo_power: Power up the WM8994 LDOs <7>lm8502_mod_brightness: set LED1 brightness (0) percent <7>lm8502_mod_brightness: set LED2 brightness (0) percent <7>lm8502_mod_brightness: set LED1 brightness (0) percent <7>lm8502_mod_brightness: set LED2 brightness (0) percent <6>PM: resume of devices complete after 72.785 msecs Restarting tasks ... done. <6>PM: suspend exit 2014-11-24 13:37:25.008019942 UTC <6>suspend: exit suspend, ret = 0 (2014-11-24 13:37:25.008050436 UTC) <6>active wake lock power-supply <6>PM: suspend entry 2014-11-24 13:37:25.040007496 UTC <6>healthd: battery l=96 v=4060 t=24.0 h=2 st=3 c=-44 chg= Freezing user space processes ... (elapsed 0.001 seconds) done. Freezing remaining freezable tasks ... (elapsed 0.002 seconds) done. Suspending console(s) (use no_console_suspend to debug) <7>lm8502_mod_brightness: set LED2 brightness (0) percent <7>lm8502_mod_brightness: set LED1 brightness (0) percent <7>lm8502_mod_brightness: set LED1 brightness (0) percent <7>lm8502_mod_brightness: set LED2 brightness (0) percent <3>msm_wm8958_shutdown_power: codec power shutdown <3>wm8994_ldo_power: Power down the WM8994 LDOs max8903b_suspend: suspend <6>PM: suspend of devices complete after 60.956 msecs <6>PM: late suspend of devices complete after 2.166 msecs <6>PM: noirq suspend of devices complete after 2.837 msecs Disabling non-boot CPUs ... <6>msm_pm_enter <6>msm_pm_enter: power collapse <6>msm_mpm_irqs_detectable: cannot monitor 0000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000<6>msm_pm_enter: return <6>PM: noirq resume of devices complete after 2.196 msecs <6>wakeup wake lock: mmc1 <6>PM: early resume of devices complete after 2.135 msecs max8903b_resume: resume <3>msm_wm8958_setup_power: codec power setup <4>8058_s3: Failed to create debugfs directory <3>wm8994_ldo_power: Power up the WM8994 LDOs <7>lm8502_mod_brightness: set LED1 brightness (0) percent <7>lm8502_mod_brightness: set LED2 brightness (0) percent <7>lm8502_mod_brightness: set LED1 brightness (0) percent <7>lm8502_mod_brightness: set LED2 brightness (0) percent <6>PM: resume of devices complete after 73.649 msecs Restarting tasks ... done. <6>PM: suspend exit 2014-11-24 13:37:33.007319299 UTC <6>suspend: exit suspend, ret = 0 (2014-11-24 13:37:33.007349796 UTC) <6>active wake lock power-supply <6>PM: suspend entry 2014-11-24 13:37:33.051171979 UTC <6>healthd: battery l=96 v=4060 t=24.0 h=2 st=3 c=-41 chg= Freezing user space processes ... (elapsed 0.001 seconds) done. Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. Suspending console(s) (use no_console_suspend to debug) <7>lm8502_mod_brightness: set LED2 brightness (0) percent <7>lm8502_mod_brightness: set LED1 brightness (0) percent <7>lm8502_mod_brightness: set LED1 brightness (0) percent <7>lm8502_mod_brightness: set LED2 brightness (0) percent <3>msm_wm8958_shutdown_power: codec power shutdown <3>wm8994_ldo_power: Power down the WM8994 LDOs max8903b_suspend: suspend <6>PM: suspend of devices complete after 28.520 msecs <6>PM: late suspend of devices complete after 2.135 msecs <6>PM: noirq suspend of devices complete after 2.928 msecs Disabling non-boot CPUs ... <6>msm_pm_enter <6>msm_pm_enter: power collapse <6>msm_mpm_irqs_detectable: cannot monitor 0000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000<6>msm_pm_enter: return <6>PM: noirq resume of devices complete after 2.135 msecs <6>wakeup wake lock: mmc1 <6>PM: early resume of devices complete after 2.135 msecs max8903b_resume: resume <3>msm_wm8958_setup_power: codec power setup <4>8058_s3: Failed to create debugfs directory <3>wm8994_ldo_power: Power up the WM8994 LDOs <7>lm8502_mod_brightness: set LED1 brightness (0) percent <7>lm8502_mod_brightness: set LED2 brightness (0) percent <7>lm8502_mod_brightness: set LED1 brightness (0) percent <7>lm8502_mod_brightness: set LED2 brightness (0) percent <6>PM: resume of devices complete after 72.092 msecs Restarting tasks ... done. <6>PM: suspend exit 2014-11-24 13:42:25.012899893 UTC <6>suspend: exit suspend, ret = 0 (2014-11-24 13:42:25.012930390 UTC) <6>active wake lock PowerManagerService.WakeLocks <6>active wake lock power-supply <6>healthd: battery l=96 v=4056 t=24.0 h=2 st=3 c=-42 chg= <6>PM: suspend entry 2014-11-24 13:42:25.080658197 UTC Freezing user space processes ... (elapsed 0.001 seconds) done. Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. Suspending console(s) (use no_console_suspend to debug) <7>lm8502_mod_brightness: set LED2 brightness (0) percent <7>lm8502_mod_brightness: set LED1 brightness (0) percent <7>lm8502_mod_brightness: set LED1 brightness (0) percent <7>lm8502_mod_brightness: set LED2 brightness (0) percent <3>msm_wm8958_shutdown_power: codec power shutdown <3>wm8994_ldo_power: Power down the WM8994 LDOs max8903b_suspend: suspend <6>PM: suspend of devices complete after 28.579 msecs <6>PM: late suspend of devices complete after 2.135 msecs <6>PM: noirq suspend of devices complete after 2.836 msecs Disabling non-boot CPUs ... <6>msm_pm_enter <6>msm_pm_enter: power collapse <6>msm_mpm_irqs_detectable: cannot monitor 0000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000<6>msm_pm_enter: return <6>PM: noirq resume of devices complete after 2.165 msecs <6>wakeup wake lock: mmc1 <6>PM: early resume of devices complete after 2.165 msecs max8903b_resume: resume <3>msm_wm8958_setup_power: codec power setup <4>8058_s3: Failed to create debugfs directory <3>wm8994_ldo_power: Power up the WM8994 LDOs <7>lm8502_mod_brightness: set LED1 brightness (0) percent <7>lm8502_mod_brightness: set LED2 brightness (0) percent <7>lm8502_mod_brightness: set LED1 brightness (0) percent <7>lm8502_mod_brightness: set LED2 brightness (0) percent <6>PM: resume of devices complete after 72.396 msecs Restarting tasks ... done. <6>PM: suspend exit 2014-11-24 13:42:35.007258393 UTC <6>suspend: exit suspend, ret = 0 (2014-11-24 13:42:35.007288890 UTC) <6>active wake lock power-supply <6>PM: suspend entry 2014-11-24 13:42:35.041749956 UTC <6>healthd: battery l=96 v=4060 t=24.0 h=2 st=3 c=-47 chg= Freezing user space processes ... (elapsed 0.001 seconds) done. Freezing remaining freezable tasks ... (elapsed 0.002 seconds) done. Suspending console(s) (use no_console_suspend to debug) <7>lm8502_mod_brightness: set LED2 brightness (0) percent <7>lm8502_mod_brightness: set LED1 brightness (0) percent <7>lm8502_mod_brightness: set LED1 brightness (0) percent <7>lm8502_mod_brightness: set LED2 brightness (0) percent <3>msm_wm8958_shutdown_power: codec power shutdown <3>wm8994_ldo_power: Power down the WM8994 LDOs max8903b_suspend: suspend <6>PM: suspend of devices complete after 34.931 msecs <6>PM: late suspend of devices complete after 2.227 msecs <6>PM: noirq suspend of devices complete after 2.837 msecs Disabling non-boot CPUs ... <6>msm_pm_enter <6>msm_pm_enter: power collapse <6>msm_mpm_irqs_detectable: cannot monitor 0000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000<6>msm_pm_enter: return <6>PM: noirq resume of devices complete after 2.135 msecs <6>wakeup wake lock: alarm_rtc <6>PM: early resume of devices complete after 2.135 msecs max8903b_resume: resume <3>msm_wm8958_setup_power: codec power setup <4>8058_s3: Failed to create debugfs directory <3>wm8994_ldo_power: Power up the WM8994 LDOs <7>lm8502_mod_brightness: set LED1 brightness (0) percent <7>lm8502_mod_brightness: set LED2 brightness (0) percent <7>lm8502_mod_brightness: set LED1 brightness (0) percent <7>lm8502_mod_brightness: set LED2 brightness (0) percent <6>PM: resume of devices complete after 68.161 msecs Restarting tasks ... done. <6>PM: suspend exit 2014-11-24 13:45:01.015674760 UTC <6>suspend: exit suspend, ret = 0 (2014-11-24 13:45:01.015705251 UTC) <6>active wake lock PowerManagerService.WakeLocks <6>active wake lock event5-500 <6>active wake lock event1-500 <6>active wake lock event0-500 <6>active wake lock power-supply <6>healthd: battery l=96 v=4060 t=24.0 h=2 st=3 c=-41 chg= <6>PM: suspend entry 2014-11-24 13:45:01.216833318 UTC Freezing user space processes ... (elapsed 0.005 seconds) done. Freezing remaining freezable tasks ... (elapsed 0.002 seconds) done. Suspending console(s) (use no_console_suspend to debug) <7>lm8502_mod_brightness: set LED2 brightness (0) percent <7>lm8502_mod_brightness: set LED1 brightness (0) percent <7>lm8502_mod_brightness: set LED1 brightness (0) percent <7>lm8502_mod_brightness: set LED2 brightness (0) percent <3>msm_wm8958_shutdown_power: codec power shutdown <3>wm8994_ldo_power: Power down the WM8994 LDOs max8903b_suspend: suspend <6>PM: suspend of devices complete after 42.095 msecs <6>PM: late suspend of devices complete after 2.135 msecs <6>PM: noirq suspend of devices complete after 2.836 msecs Disabling non-boot CPUs ... <6>msm_pm_enter <6>msm_pm_enter: power collapse <6>msm_mpm_irqs_detectable: cannot monitor 0000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000<6>msm_pm_enter: return <6>PM: noirq resume of devices complete after 2.165 msecs <6>wakeup wake lock: gpio_input <6>PM: early resume of devices complete after 2.135 msecs max8903b_resume: resume <3>msm_wm8958_setup_power: codec power setup <4>8058_s3: Failed to create debugfs directory <3>wm8994_ldo_power: Power up the WM8994 LDOs <6>gpio_keys_scan_keys: key 1-ac, 2 (40) changed to 1 <7>lm8502_mod_brightness: set LED1 brightness (0) percent <7>lm8502_mod_brightness: set LED2 brightness (0) percent <7>lm8502_mod_brightness: set LED1 brightness (0) percent <7>lm8502_mod_brightness: set LED2 brightness (0) percent <6>PM: resume of devices complete after 68.188 msecs Restarting tasks ... done. <6>PM: suspend exit 2014-11-24 13:57:25.014150876 UTC <6>suspend: exit suspend, ret = 0 (2014-11-24 13:57:25.014181374 UTC) <6>gpio_keys_scan_keys: key 1-ac, 2 (40) changed to 0 <6>healthd: battery l=96 v=4056 t=23.0 h=2 st=3 c=-43 chg= <6>lsm303dlh_acc_sysfs: hw init start <6>request_suspend_state: wakeup (3->0) at 2170329360702 (2014-11-24 13:57:25.067972925 UTC) <6>lsm303dlh_acc_sysfs: hw init done <6>[MPDEC]: Screen -> on. Activated mpdecision. | Mask=[1000] <3>[DISP] lcdc_panel_power: ++ 1 <4>mdp4_csc_config: Block type 10 isn't supported by CSC. <4>mdp4_csc_config: Block type 8 isn't supported by CSC. <6>mdp4_overlay_mdp_perf_upd mdp clk is changed [1] from 0 to 128000000 <3>[DISP] lcdc_tenderloin_panel_set_backlight: 61 <6>pil pil0: q6: Brought out of reset <6>apr_tal:Q6 Is Up <6>apr_tal: SMD_EVENT_OPEN <6>msm_device_put:device speaker_stereo_rx set 0 <6>msm_device_put:device speaker_stereo_rx set 1 <3>msm_device_put:device freq =48000 <3>Device active <5>type=1400 audit(1416837454.788:14): avc: denied { read write } for pid=1096 comm="Binder_4" path="socket:[122771]" dev="sockfs" ino=122771 scontext=u:r:untrusted_app:s0 tcontext=u:r:init:s0 tclass=unix_stream_socket <6>msm_device_put:device speaker_stereo_rx set 0 <6>healthd: battery l=95 v=4017 t=24.0 h=2 st=3 c=-626 chg= <6>healthd: battery l=95 v=4012 t=24.0 h=2 st=3 c=-626 chg= <6>healthd: battery l=95 v=4008 t=24.0 h=2 st=3 c=-629 chg= <6>healthd: battery l=95 v=4008 t=24.0 h=2 st=3 c=-627 chg= <6>healthd: battery l=94 v=4003 t=25.0 h=2 st=3 c=-656 chg= <6>healthd: battery l=94 v=3998 t=25.0 h=2 st=3 c=-656 chg= <6>healthd: battery l=94 v=3993 t=25.0 h=2 st=3 c=-657 chg= <6>healthd: battery l=94 v=3993 t=25.0 h=2 st=3 c=-657 chg= <6>healthd: battery l=93 v=3988 t=25.0 h=2 st=3 c=-657 chg= <6>gpio_keys_scan_keys: key 1-ac, 2 (40) changed to 1 <6>gpio_keys_scan_keys: key 1-ac, 2 (40) changed to 0 <3>[DISP] lcdc_tenderloin_panel_set_backlight: 0 <3>[DISP] lcdc_panel_power: ++ 0 <6>request_suspend_state: sleep (0->3) at 2863851250623 (2014-11-24 14:08:58.589862846 UTC) <6>[MPDEC]: Screen -> off. Deactivated mpdecision. <6>msm_device_put:device speaker_stereo_rx set 0 <6>msm_device_put:device speaker_stereo_rx set 1 <3>msm_device_put:device freq =48000 <3>Device active <6>msm_device_put:device speaker_stereo_rx set 0 <6>PM: suspend entry 2014-11-24 14:09:02.292743698 UTC Freezing user space processes ... (elapsed 0.100 seconds) done. Freezing remaining freezable tasks ... (elapsed 0.002 seconds) done. Suspending console(s) (use no_console_suspend to debug) <7>lm8502_mod_brightness: set LED2 brightness (0) percent <7>lm8502_mod_brightness: set LED1 brightness (0) percent <7>lm8502_mod_brightness: set LED1 brightness (0) percent <7>lm8502_mod_brightness: set LED2 brightness (0) percent <3>msm_wm8958_shutdown_power: codec power shutdown <3>wm8994_ldo_power: Power down the WM8994 LDOs max8903b_suspend: suspend <6>PM: suspend of devices complete after 235.717 msecs <6>PM: late suspend of devices complete after 5.371 msecs <6>PM: noirq suspend of devices complete after 7.324 msecs Disabling non-boot CPUs ... <6>msm_pm_enter <6>msm_pm_enter: power collapse <6>msm_mpm_irqs_detectable: cannot monitor 0000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000<6>msm_pm_enter: return <6>PM: noirq resume of devices complete after 4.791 msecs <6>wakeup wake lock: alarm_rtc <6>PM: early resume of devices complete after 4.821 msecs max8903b_resume: resume <3>msm_wm8958_setup_power: codec power setup <4>8058_s3: Failed to create debugfs directory <3>wm8994_ldo_power: Power up the WM8994 LDOs <7>lm8502_mod_brightness: set LED1 brightness (0) percent <7>lm8502_mod_brightness: set LED2 brightness (0) percent <7>lm8502_mod_brightness: set LED1 brightness (0) percent <7>lm8502_mod_brightness: set LED2 brightness (0) percent <6>PM: resume of devices complete after 76.292 msecs Restarting tasks ... done. <6>PM: suspend exit 2014-11-24 14:09:31.018600277 UTC <6>suspend: exit suspend, ret = 0 (2014-11-24 14:09:31.018630769 UTC) <6>healthd: battery l=93 v=4022 t=25.0 h=2 st=3 c=-34 chg= <6>PM: suspend entry 2014-11-24 14:09:37.282213520 UTC Freezing user space processes ... (elapsed 0.008 seconds) done. Freezing remaining freezable tasks ... (elapsed 0.002 seconds) done. Suspending console(s) (use no_console_suspend to debug) <7>lm8502_mod_brightness: set LED2 brightness (0) percent <7>lm8502_mod_brightness: set LED1 brightness (0) percent <7>lm8502_mod_brightness: set LED1 brightness (0) percent <7>lm8502_mod_brightness: set LED2 brightness (0) percent <3>msm_wm8958_shutdown_power: codec power shutdown <3>wm8994_ldo_power: Power down the WM8994 LDOs max8903b_suspend: suspend <6>PM: suspend of devices complete after 227.386 msecs <6>PM: late suspend of devices complete after 5.340 msecs <6>PM: noirq suspend of devices complete after 6.988 msecs Disabling non-boot CPUs ... <6>msm_pm_enter <6>msm_pm_enter: power collapse <6>msm_mpm_irqs_detectable: cannot monitor 0000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000<6>msm_pm_enter: return <6>PM: noirq resume of devices complete after 5.279 msecs <6>wakeup wake lock: mmc1 <6>PM: early resume of devices complete after 5.279 msecs max8903b_resume: resume <3>msm_wm8958_setup_power: codec power setup <4>8058_s3: Failed to create debugfs directory <3>wm8994_ldo_power: Power up the WM8994 LDOs <7>lm8502_mod_brightness: set LED1 brightness (0) percent <7>lm8502_mod_brightness: set LED2 brightness (0) percent <7>lm8502_mod_brightness: set LED1 brightness (0) percent <7>lm8502_mod_brightness: set LED2 brightness (0) percent <6>PM: resume of devices complete after 80.071 msecs Restarting tasks ... done. <6>PM: suspend exit 2014-11-24 14:09:51.012045358 UTC <6>suspend: exit suspend, ret = 0 (2014-11-24 14:09:51.012045358 UTC) <6>active wake lock power-supply <6>PM: suspend entry 2014-11-24 14:09:51.048576337 UTC <6>healthd: battery l=93 v=4022 t=25.0 h=2 st=3 c=-33 chg= Freezing user space processes ... (elapsed 0.001 seconds) done. Freezing remaining freezable tasks ... (elapsed 0.002 seconds) done. Suspending console(s) (use no_console_suspend to debug) <7>lm8502_mod_brightness: set LED2 brightness (0) percent <7>lm8502_mod_brightness: set LED1 brightness (0) percent <7>lm8502_mod_brightness: set LED1 brightness (0) percent <7>lm8502_mod_brightness: set LED2 brightness (0) percent <3>msm_wm8958_shutdown_power: codec power shutdown <3>wm8994_ldo_power: Power down the WM8994 LDOs max8903b_suspend: suspend <6>PM: suspend of devices complete after 228.009 msecs <6>PM: late suspend of devices complete after 5.185 msecs <6>PM: noirq suspend of devices complete after 6.985 msecs Disabling non-boot CPUs ... <6>msm_pm_enter <6>msm_pm_enter: power collapse <6>msm_mpm_irqs_detectable: cannot monitor 0000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000<6>msm_pm_enter: return <6>PM: noirq resume of devices complete after 5.277 msecs <6>wakeup wake lock: mmc1 <6>PM: early resume of devices complete after 5.277 msecs max8903b_resume: resume <3>msm_wm8958_setup_power: codec power setup <4>8058_s3: Failed to create debugfs directory <3>wm8994_ldo_power: Power up the WM8994 LDOs <7>lm8502_mod_brightness: set LED1 brightness (0) percent <7>lm8502_mod_brightness: set LED2 brightness (0) percent <7>lm8502_mod_brightness: set LED1 brightness (0) percent <7>lm8502_mod_brightness: set LED2 brightness (0) percent <6>PM: resume of devices complete after 77.336 msecs Restarting tasks ... done. <6>PM: suspend exit 2014-11-24 14:09:54.006923262 UTC <6>suspend: exit suspend, ret = 0 (2014-11-24 14:09:54.006923262 UTC) <6>active wake lock power-supply <6>PM: suspend entry 2014-11-24 14:09:54.043457015 UTC Freezing user space processes ... (elapsed 0.023 seconds) done. Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. Suspending console(s) (use no_console_suspend to debug) <7>lm8502_mod_brightness: set LED2 brightness (0) percent <7>lm8502_mod_brightness: set LED1 brightness (0) percent <7>lm8502_mod_brightness: set LED1 brightness (0) percent <7>lm8502_mod_brightness: set LED2 brightness (0) percent <3>msm_wm8958_shutdown_power: codec power shutdown <3>wm8994_ldo_power: Power down the WM8994 LDOs max8903b_suspend: suspend <6>PM: suspend of devices complete after 207.873 msecs <6>PM: late suspend of devices complete after 5.217 msecs <6>PM: noirq suspend of devices complete after 6.956 msecs Disabling non-boot CPUs ... <6>msm_pm_enter <6>msm_pm_enter: power collapse <6>msm_mpm_irqs_detectable: cannot monitor 0000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000<6>msm_pm_enter: return <6>PM: noirq resume of devices complete after 5.247 msecs <6>wakeup wake lock: mmc1 <6>PM: early resume of devices complete after 5.278 msecs max8903b_resume: resume <3>msm_wm8958_setup_power: codec power setup <4>8058_s3: Failed to create debugfs directory <3>wm8994_ldo_power: Power up the WM8994 LDOs <7>lm8502_mod_brightness: set LED1 brightness (0) percent <7>lm8502_mod_brightness: set LED2 brightness (0) percent <7>lm8502_mod_brightness: set LED1 brightness (0) percent <7>lm8502_mod_brightness: set LED2 brightness (0) percent <6>PM: resume of devices complete after 79.749 msecs Restarting tasks ... done. <6>PM: suspend exit 2014-11-24 14:13:35.012412616 UTC <6>suspend: exit suspend, ret = 0 (2014-11-24 14:13:35.012443114 UTC) <6>active wake lock PowerManagerService.WakeLocks <6>active wake lock power-supply <6>healthd: battery l=93 v=4017 t=25.0 h=2 st=3 c=-33 chg= <6>healthd: battery l=93 v=4027 t=25.0 h=2 st=3 c=-33 chg= <6>PM: suspend entry 2014-11-24 14:13:35.090907365 UTC Freezing user space processes ... (elapsed 0.001 seconds) done. Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. Suspending console(s) (use no_console_suspend to debug) <7>lm8502_mod_brightness: set LED2 brightness (0) percent <7>lm8502_mod_brightness: set LED1 brightness (0) percent <7>lm8502_mod_brightness: set LED1 brightness (0) percent <7>lm8502_mod_brightness: set LED2 brightness (0) percent <3>msm_wm8958_shutdown_power: codec power shutdown <3>wm8994_ldo_power: Power down the WM8994 LDOs max8903b_suspend: suspend <6>PM: suspend of devices complete after 206.764 msecs <6>PM: late suspend of devices complete after 5.217 msecs <6>PM: noirq suspend of devices complete after 7.017 msecs Disabling non-boot CPUs ... <6>msm_pm_enter <6>msm_pm_enter: power collapse <6>msm_mpm_irqs_detectable: cannot monitor 0000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000<6>msm_pm_enter: return <6>PM: noirq resume of devices complete after 5.369 msecs <6>wakeup wake lock: alarm_rtc <6>PM: early resume of devices complete after 5.278 msecs max8903b_resume: resume <3>msm_wm8958_setup_power: codec power setup <4>8058_s3: Failed to create debugfs directory <3>wm8994_ldo_power: Power up the WM8994 LDOs <7>lm8502_mod_brightness: set LED1 brightness (0) percent <7>lm8502_mod_brightness: set LED2 brightness (0) percent <7>lm8502_mod_brightness: set LED1 brightness (0) percent <7>lm8502_mod_brightness: set LED2 brightness (0) percent <6>PM: resume of devices complete after 76.788 msecs Restarting tasks ... done. <6>PM: suspend exit 2014-11-24 14:14:52.013175169 UTC <6>suspend: exit suspend, ret = 0 (2014-11-24 14:14:52.013205667 UTC) <6>active wake lock PowerManagerService.WakeLocks <6>active wake lock power-supply <6>healthd: battery l=93 v=4027 t=25.0 h=2 st=3 c=-42 chg= <6>PM: suspend entry 2014-11-24 14:15:21.321003145 UTC Freezing user space processes ... (elapsed 0.009 seconds) done. Freezing remaining freezable tasks ... (elapsed 0.002 seconds) done. Suspending console(s) (use no_console_suspend to debug) <3>dpm_run_callback(): platform_pm_suspend+0x0/0x54 returns -16 <3>PM: Device alarm failed to suspend: error -16 <3>PM: Some devices failed to suspend <6>PM: resume of devices complete after 7.019 msecs <7>lm8502_mod_brightness: set LED2 brightness (0) percent <7>lm8502_mod_brightness: set LED1 brightness (0) percent <3>msm_wm8958_shutdown_power: codec power shutdown <3>wm8994_ldo_power: Power down the WM8994 LDOs <3>msm_wm8958_setup_power: codec power setup <4>8058_s3: Failed to create debugfs directory <3>wm8994_ldo_power: Power up the WM8994 LDOs Restarting tasks ... done. <6>PM: suspend exit 2014-11-24 14:15:21.821430381 UTC <6>suspend: exit suspend, ret = -16 (2014-11-24 14:15:21.821460899 UTC) <6>PM: suspend entry 2014-11-24 14:15:22.131183801 UTC Freezing user space processes ... (elapsed 0.096 seconds) done. Freezing remaining freezable tasks ... (elapsed 0.002 seconds) done. Suspending console(s) (use no_console_suspend to debug) <7>lm8502_mod_brightness: set LED2 brightness (0) percent <7>lm8502_mod_brightness: set LED1 brightness (0) percent <7>lm8502_mod_brightness: set LED1 brightness (0) percent <7>lm8502_mod_brightness: set LED2 brightness (0) percent <3>msm_wm8958_shutdown_power: codec power shutdown <3>wm8994_ldo_power: Power down the WM8994 LDOs max8903b_suspend: suspend <6>PM: suspend of devices complete after 227.355 msecs <6>PM: late suspend of devices complete after 5.340 msecs <6>PM: noirq suspend of devices complete after 7.019 msecs Disabling non-boot CPUs ... <6>msm_pm_enter <6>msm_pm_enter: power collapse <6>msm_mpm_irqs_detectable: cannot monitor 0000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000<6>msm_pm_enter: return <6>PM: noirq resume of devices complete after 5.279 msecs <6>wakeup wake lock: gpio_input <6>PM: early resume of devices complete after 5.310 msecs max8903b_resume: resume <6>gpio_keys_scan_keys: key 1-ac, 2 (40) changed to 1 <3>msm_wm8958_setup_power: codec power setup <4>8058_s3: Failed to create debugfs directory <3>wm8994_ldo_power: Power up the WM8994 LDOs <7>lm8502_mod_brightness: set LED1 brightness (0) percent <7>lm8502_mod_brightness: set LED2 brightness (0) percent <7>lm8502_mod_brightness: set LED1 brightness (0) percent <7>lm8502_mod_brightness: set LED2 brightness (0) percent <6>PM: resume of devices complete after 84.334 msecs Restarting tasks ... done. <6>PM: suspend exit 2014-11-24 14:16:32.022535429 UTC <6>suspend: exit suspend, ret = 0 (2014-11-24 14:16:32.022565921 UTC) <6>request_suspend_state: wakeup (3->0) at 2908014480793 (2014-11-24 14:16:32.037660290 UTC) <6>lsm303dlh_acc_sysfs: hw init start <6>lsm303dlh_acc_sysfs: hw init done <6>healthd: battery l=93 v=4027 t=25.0 h=2 st=3 c=-33 chg= <6>[MPDEC]: Screen -> on. Activated mpdecision. | Mask=[1000] <3>[DISP] lcdc_panel_power: ++ 1 <6>gpio_keys_scan_keys: key 1-ac, 2 (40) changed to 0 <4>mdp4_csc_config: Block type 10 isn't supported by CSC. <4>mdp4_csc_config: Block type 8 isn't supported by CSC. <6>mdp4_overlay_mdp_perf_upd mdp clk is changed [1] from 0 to 128000000 <3>[DISP] lcdc_tenderloin_panel_set_backlight: 61 <6>msm_device_put:device speaker_stereo_rx set 0 <6>msm_device_put:device speaker_stereo_rx set 1 <3>msm_device_put:device freq =48000 <3>Device active <6>msm_device_put:device speaker_stereo_rx set 0 <3>jack_notifier_event: event! <6>msm_device_put:device speaker_stereo_rx set 0 <6>msm_device_put:device speaker_stereo_rx set 1 <3>msm_device_put:device freq =48000 <3>Device active <6>msm_device_put:device speaker_stereo_rx set 0 <6>healthd: battery l=92 v=3979 t=27.0 h=2 st=3 c=-622 chg= <6>msm_device_put:device speaker_stereo_rx set 0 <6>msm_device_put:device speaker_stereo_rx set 1 <3>msm_device_put:device freq =48000 <3>Device active <6>healthd: battery l=91 v=3974 t=27.0 h=2 st=3 c=-714 chg= <6>healthd: battery l=91 v=3974 t=27.0 h=2 st=3 c=-716 chg= <6>healthd: battery l=91 v=3969 t=27.0 h=2 st=3 c=-718 chg= <6>healthd: battery l=91 v=3969 t=27.0 h=2 st=3 c=-715 chg= <6>msm_device_put:device speaker_stereo_rx set 0 <6>healthd: battery l=91 v=3974 t=27.0 h=2 st=3 c=-636 chg= <6>healthd: battery l=91 v=3974 t=27.0 h=2 st=3 c=-623 chg= <6>healthd: battery l=91 v=3974 t=27.0 h=2 st=3 c=-623 chg= <6>healthd: battery l=91 v=3974 t=27.0 h=2 st=3 c=-632 chg= <6>healthd: battery l=91 v=3974 t=27.0 h=2 st=3 c=-623 chg= <6>healthd: battery l=91 v=3974 t=27.0 h=2 st=3 c=-622 chg= <6>healthd: battery l=91 v=3974 t=27.0 h=2 st=3 c=-623 chg= <6>healthd: battery l=91 v=3969 t=27.0 h=2 st=3 c=-676 chg= <6>healthd: battery l=91 v=3969 t=27.0 h=2 st=3 c=-623 chg= <6>healthd: battery l=91 v=3969 t=27.0 h=2 st=3 c=-622 chg= <6>healthd: battery l=91 v=3969 t=27.0 h=2 st=3 c=-623 chg= <6>healthd: battery l=90 v=3969 t=27.0 h=2 st=3 c=-623 chg= <6>healthd: battery l=90 v=3964 t=27.0 h=2 st=3 c=-624 chg= <6>healthd: battery l=90 v=3969 t=27.0 h=2 st=3 c=-624 chg= <3>jack_notifier_event: event! <2>MIC DETECT: DISABLE. Jack removed <3>wm8994-codec wm8994-codec: Reporting headphone removed <6>healthd: battery l=90 v=3969 t=27.0 h=2 st=3 c=-680 chg= <6>healthd: battery l=90 v=3969 t=27.0 h=2 st=3 c=-680 chg= <6>healthd: battery l=90 v=3969 t=27.0 h=2 st=3 c=-622 chg= <6>healthd: battery l=90 v=3969 t=27.0 h=2 st=3 c=-681 chg= <6>healthd: battery l=90 v=3969 t=27.0 h=2 st=3 c=-622 chg= <6>healthd: battery l=90 v=3969 t=27.0 h=2 st=3 c=-626 chg= <6>healthd: battery l=90 v=3964 t=27.0 h=2 st=3 c=-622 chg= <6>healthd: battery l=90 v=3964 t=27.0 h=2 st=3 c=-650 chg= <6>healthd: battery l=90 v=3964 t=27.0 h=2 st=3 c=-624 chg= <6>healthd: battery l=90 v=3964 t=27.0 h=2 st=3 c=-622 chg= <6>healthd: battery l=90 v=3964 t=27.0 h=2 st=3 c=-622 chg= <6>healthd: battery l=90 v=3964 t=27.0 h=2 st=3 c=-622 chg= <6>healthd: battery l=90 v=3964 t=27.0 h=2 st=3 c=-624 chg= <6>healthd: battery l=90 v=3964 t=27.0 h=2 st=3 c=-622 chg= <6>healthd: battery l=90 v=3964 t=27.0 h=2 st=3 c=-623 chg= <6>healthd: battery l=90 v=3960 t=27.0 h=2 st=3 c=-630 chg= <6>healthd: battery l=90 v=3960 t=28.0 h=2 st=3 c=-650 chg= <6>healthd: battery l=90 v=3960 t=28.0 h=2 st=3 c=-622 chg= <6>healthd: battery l=90 v=3960 t=28.0 h=2 st=3 c=-622 chg= <6>healthd: battery l=90 v=3960 t=28.0 h=2 st=3 c=-623 chg= <6>healthd: battery l=90 v=3955 t=28.0 h=2 st=3 c=-623 chg= <6>healthd: battery l=89 v=3960 t=28.0 h=2 st=3 c=-623 chg= <6>healthd: battery l=89 v=3960 t=28.0 h=2 st=3 c=-622 chg= <6>healthd: battery l=89 v=3960 t=28.0 h=2 st=3 c=-622 chg= <6>healthd: battery l=89 v=3960 t=28.0 h=2 st=3 c=-622 chg= <6>healthd: battery l=89 v=3960 t=28.0 h=2 st=3 c=-622 chg= <6>healthd: battery l=89 v=3960 t=28.0 h=2 st=3 c=-633 chg= <6>healthd: battery l=89 v=3955 t=28.0 h=2 st=3 c=-623 chg= <6>healthd: battery l=89 v=3955 t=28.0 h=2 st=3 c=-623 chg= <6>healthd: battery l=89 v=3955 t=28.0 h=2 st=3 c=-623 chg= <6>healthd: battery l=89 v=3950 t=28.0 h=2 st=3 c=-623 chg= <6>healthd: battery l=89 v=3955 t=28.0 h=2 st=3 c=-622 chg= <6>healthd: battery l=89 v=3955 t=28.0 h=2 st=3 c=-623 chg= <6>healthd: battery l=89 v=3955 t=28.0 h=2 st=3 c=-622 chg= <6>healthd: battery l=89 v=3955 t=28.0 h=2 st=3 c=-623 chg= <6>healthd: battery l=89 v=3955 t=28.0 h=2 st=3 c=-623 chg= <6>healthd: battery l=89 v=3955 t=28.0 h=2 st=3 c=-623 chg= <6>healthd: battery l=89 v=3950 t=28.0 h=2 st=3 c=-623 chg= <6>healthd: battery l=88 v=3950 t=28.0 h=2 st=3 c=-625 chg= <6>healthd: battery l=88 v=3950 t=28.0 h=2 st=3 c=-624 chg= <6>healthd: battery l=88 v=3950 t=28.0 h=2 st=3 c=-623 chg= <6>healthd: battery l=88 v=3950 t=28.0 h=2 st=3 c=-623 chg= <6>healthd: battery l=88 v=3950 t=28.0 h=2 st=3 c=-625 chg= <6>healthd: battery l=88 v=3945 t=28.0 h=2 st=3 c=-628 chg= <6>healthd: battery l=88 v=3950 t=28.0 h=2 st=3 c=-624 chg= <6>healthd: battery l=88 v=3950 t=28.0 h=2 st=3 c=-624 chg= <6>healthd: battery l=88 v=3950 t=28.0 h=2 st=3 c=-624 chg= <3>jack_notifier_event: event! <6>healthd: battery l=88 v=3950 t=28.0 h=2 st=3 c=-630 chg= <6>msm_device_put:device speaker_stereo_rx set 0 <6>msm_device_put:device speaker_stereo_rx set 1 <3>msm_device_put:device freq =48000 <3>Device active <6>healthd: battery l=88 v=3945 t=28.0 h=2 st=3 c=-723 chg= <6>healthd: battery l=88 v=3940 t=28.0 h=2 st=3 c=-720 chg= <6>healthd: battery l=88 v=3940 t=28.0 h=2 st=3 c=-722 chg= <6>msm_device_put:device speaker_stereo_rx set 0 <6>healthd: battery l=88 v=3945 t=28.0 h=2 st=3 c=-651 chg= <6>msm_device_put:device speaker_stereo_rx set 0 <6>msm_device_put:device speaker_stereo_rx set 1 <3>msm_device_put:device freq =48000 <3>Device active <6>healthd: battery l=88 v=3940 t=28.0 h=2 st=3 c=-683 chg= <3>jack_notifier_event: event! <2>MIC DETECT: DISABLE. Jack removed <3>wm8994-codec wm8994-codec: Reporting headphone removed <3>jack_notifier_event: event! <4>------------[ cut here ]------------ <4>WARNING: at ../../../../../../kernel/htc/msm8960/sound/soc/codecs/wm8994.c:3781 wm8958_mic_detect+0xec/0x1a0() [<80014c60>] (unwind_backtrace+0x0/0x11c) from [<80078188>] (warn_slowpath_common+0x48/0x60) [<80078188>] (warn_slowpath_common+0x48/0x60) from [<80078258>] (warn_slowpath_null+0x18/0x1c) [<80078258>] (warn_slowpath_null+0x18/0x1c) from [<804c9434>] (wm8958_mic_detect+0xec/0x1a0) [<804c9434>] (wm8958_mic_detect+0xec/0x1a0) from [<804cea88>] (jack_notifier_event+0x60/0x170) [<804cea88>] (jack_notifier_event+0x60/0x170) from [<800966fc>] (notifier_call_chain+0x38/0x68) [<800966fc>] (notifier_call_chain+0x38/0x68) from [<80096940>] (__blocking_notifier_call_chain+0x40/0x54) [<80096940>] (__blocking_notifier_call_chain+0x40/0x54) from [<80096968>] (blocking_notifier_call_chain+0x14/0x18) [<80096968>] (blocking_notifier_call_chain+0x14/0x18) from [<804bf5d4>] (snd_soc_jack_report+0xb0/0xd0) [<804bf5d4>] (snd_soc_jack_report+0xb0/0xd0) from [<8008c1bc>] (process_one_work+0x1c4/0x310) [<8008c1bc>] (process_one_work+0x1c4/0x310) from [<8008c4b8>] (worker_thread+0x184/0x2a4) [<8008c4b8>] (worker_thread+0x184/0x2a4) from [<800911b8>] (kthread+0xa0/0xb0) [<800911b8>] (kthread+0xa0/0xb0) from [<8000f5f4>] (kernel_thread_exit+0x0/0x8) <4>---[ end trace 8e42374ae981ba98 ]--- <6>msm_device_put:device speaker_stereo_rx set 0 <6>msm_device_put:device speaker_stereo_rx set 0 <6>msm_device_put:device speaker_stereo_rx set 1 <3>msm_device_put:device freq =48000 <3>Device active <6>healthd: battery l=88 v=3940 t=28.0 h=2 st=3 c=-770 chg= <6>gpio_keys_scan_keys: key 1-ac, 2 (40) changed to 1 <6>gpio_keys_scan_keys: key 1-ac, 2 (40) changed to 0 <6>healthd: battery l=88 v=3926 t=28.0 h=2 st=3 c=-796 chg= <6>msm_device_put:device speaker_stereo_rx set 0 <6>aac_in_open:session id 1: NT mode encoder success <6>aac_in_open:session id 1: success <6>audio_in_release: session id 1 <6>msm_device_put:device speaker_stereo_rx set 0 <6>msm_device_put:device speaker_stereo_rx set 1 <3>msm_device_put:device freq =48000 <3>Device active <6>healthd: battery l=88 v=3931 t=28.0 h=2 st=3 c=-878 chg= <3>jack_notifier_event: event! <2>MIC DETECT: DISABLE. Jack removed <3>wm8994-codec wm8994-codec: Reporting headphone removed <6>msm_device_put:device speaker_stereo_rx set 0 <6>msm_device_put:device speaker_stereo_rx set 1 <3>msm_device_put:device freq =48000 <3>jack_notifier_event: event! <4>------------[ cut here ]------------ <4>WARNING: at ../../../../../../kernel/htc/msm8960/sound/soc/codecs/wm8994.c:3781 wm8958_mic_detect+0xec/0x1a0() [<80014c60>] (unwind_backtrace+0x0/0x11c) from [<80078188>] (warn_slowpath_common+0x48/0x60) [<80078188>] (warn_slowpath_common+0x48/0x60) from [<80078258>] (warn_slowpath_null+0x18/0x1c) [<80078258>] (warn_slowpath_null+0x18/0x1c) from [<804c9434>] (wm8958_mic_detect+0xec/0x1a0) [<804c9434>] (wm8958_mic_detect+0xec/0x1a0) from [<804cea88>] (jack_notifier_event+0x60/0x170) [<804cea88>] (jack_notifier_event+0x60/0x170) from [<800966fc>] (notifier_call_chain+0x38/0x68) [<800966fc>] (notifier_call_chain+0x38/0x68) from [<80096940>] (__blocking_notifier_call_chain+0x40/0x54) [<80096940>] (__blocking_notifier_call_chain+0x40/0x54) from [<80096968>] (blocking_notifier_call_chain+0x14/0x18) [<80096968>] (blocking_notifier_call_chain+0x14/0x18) from [<804bf5d4>] (snd_soc_jack_report+0xb0/0xd0) [<804bf5d4>] (snd_soc_jack_report+0xb0/0xd0) from [<8008c1bc>] (process_one_work+0x1c4/0x310) [<8008c1bc>] (process_one_work+0x1c4/0x310) from [<8008c4b8>] (worker_thread+0x184/0x2a4) [<8008c4b8>] (worker_thread+0x184/0x2a4) from [<800911b8>] (kthread+0xa0/0xb0) [<800911b8>] (kthread+0xa0/0xb0) from [<8000f5f4>] (kernel_thread_exit+0x0/0x8) <4>---[ end trace 8e42374ae981ba99 ]--- <6>msm_device_put:device speaker_stereo_rx set 0 <6>msm_device_put:device speaker_stereo_rx set 1 <3>msm_device_put:device freq =48000 <6>healthd: battery l=88 v=3940 t=29.0 h=2 st=3 c=-721 chg= <6>healthd: battery l=88 v=3940 t=29.0 h=2 st=3 c=-699 chg= <6>msm_device_put:device speaker_stereo_rx set 0 <6>aac_in_open:session id 1: NT mode encoder success <6>aac_in_open:session id 1: success <6>audio_in_release: session id 1 <6>SysRq : Emergency Remount R/O <0>Restarting system with command ''. <5>Going down for restart now <6>msm_restart: Initiating reboot via bootloader Broadcasting: Intent { act=com.evervolv.toolbox.action.DUMPLOGCAT_FINISHED (has extras) } Broadcast completed: result=0