------ LAST KMSG (/proc/last_klog) ------ platform_init_mmu_mappings: entry platform_init_mmu_mappings:57: mapping shared ram as uncached at 0x40000000 platform_init_mmu_mappings: exit platform_init_timer: entry platform_init_timer: exit platform_set_periodic_timer:39: cb 0x4010c6bd, arg 0x0, interval 10 ****************************************** * Welcome to bootie! * Version: 468 ****************************************** mmch_init: entry mmch_init: exit usbc: initialized (rc=0) target_init_buttonscan: entry target_init_board_id: emu=0, product=0x1, hwbuild=1 boardtype=topaz-Wifi-pvt Memory bank 0 -> address: 0x40200000-0x46700000 size:0x06500000 Memory bank 1 -> address: 0x48000000-0x7ff00000 size:0x37F00000 i2c_init: Register GSBI 3 as i2c bus 0 i2c_init_clock: The i2c clock rate is 19200000 i2c_init: Register GSBI 4 as i2c bus 1 i2c_init_clock: The i2c clock rate is 19200000 i2c_init: Register GSBI 9 as i2c bus 2 i2c_init_clock: The i2c clock rate is 19200000 i2c_init: Register GSBI 8 as i2c bus 3 i2c_init_clock: The i2c clock rate is 19200000 i2c_init: Register GSBI 7 as i2c bus 4 i2c_init_clock: The i2c clock rate is 19200000 a6_init_sbw_pins: TCK: 157, TDIO; 158, WKUP: 155 max8903b_gpio_init Starting battery authentication... Battery auth succeeded sys_init: entry Wall message(Boot reason) = 0x77665502 ("recovery") sys_init: booted because 'recovery' mmch_reset: entry Bus(0) Primecell ID regs: 0x80 0x11 0x4 0x0 0xd 0xf0 0x5 0xb1 sdc1_clk_set 400000 mmch_set_active:727: bus 0, active 1 sdc1_clk_set 400000 mmch_reset: exit mmch_set_active:727: bus 0, active 1 sdc1_clk_set 400000 cid: 0x2010053 0x454d3136 0x479051a5 0x50e86ef2 mfg id: 0x2 oem id: 0x100 name: 'SEM16G' rev: 0x90 sn: 0x51a550e8 date: 6.2011 sdc1_clk_set 50000000 token section is 4096 bytes long target_check_boot_condition: entry Wall message(Boot reason) = 0x77665502 ("recovery") display_init: displayWidth: 1024, displayHeight: 768 Wall message(Boot reason) = 0x77665502 ("recovery") p=99 ca=4993600 v=4089440 i=-955156 autobooting with 'fsboot' command loading file '/boot/uImage' to address 0x41000000 parse_uimage:241: uimage 0x41000000 <6>[ 0.000000] Booting Linux on physical CPU 0 <6>[ 0.000000] Initializing cgroup subsys cpu <5>[ 0.000000] Linux version 3.0.101-cyanogenmod-g2231aef (jc@jc-desk1) (gcc version 4.7 (GCC) ) #1 SMP PREEMPT Mon Mar 17 02:45:12 CDT 2014 <4>[ 0.000000] CPU: ARMv7 Processor [510f02d2] revision 2 (ARMv7), cr=10c5387d <4>[ 0.000000] CPU: VIPT nonaliasing data cache, VIVT ASID tagged instruction cache <4>[ 0.000000] Machine: TENDERLOIN <6>[ 0.000000] memory pool 0 (start 38000000 size 600000) initialized <6>[ 0.000000] memory pool 1 (start 38600000 size 3802000) initialized <6>[ 0.000000] memory pool 3 (start 75e00000 size 9800000) initialized <4>[ 0.000000] Memory policy: ECC disabled, Data cache writealloc <3>[ 0.000000] smem_find(137, 72): wrong size 64 <6>[ 0.000000] socinfo_init: v5, id=86, ver=2.0, raw_id=1696, raw_ver=1696, hw_plat=0, hw_plat_ver=65536 <6>[ 0.000000] accessory_chip=0 <7>[ 0.000000] On node 0 totalpages: 213760 <7>[ 0.000000] free_area_init_node: node 0, pgdat 80c96460, node_mem_map 81117000 <7>[ 0.000000] Normal zone: 2024 pages used for memmap <7>[ 0.000000] Normal zone: 0 pages reserved <7>[ 0.000000] Normal zone: 211736 pages, LIFO batch:31 <6>[ 0.000000] passing from bootie 6291456 bytes at 7f600000 physical for fb <6>[ 0.000000] PERCPU: Embedded 8 pages/cpu @81909000 s9536 r8192 d15040 u32768 <7>[ 0.000000] pcpu-alloc: s9536 r8192 d15040 u32768 alloc=8*4096 <7>[ 0.000000] pcpu-alloc: [0] 0 [0] 1 <4>[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 211736 <5>[ 0.000000] Kernel command line: root=/dev/ram0 rootwait ro fbcon=disable console=ttyS0,115200n8 androidboot.serialno=MHUBS9F1HNSJGRRLS6VR8481VBMJ9IFL fb=0x7f600000 nduid=63af5c3db01f2f907feacdcfd880a0f79d994eba klog=0x7ff00000 klog_len=0x100000 boardtype=topaz-Wifi-pvt lastboot=recovery <4>[ 0.000000] boardtype_setup: boardtype_str = topaz-Wifi-pvt <4>[ 0.000000] boardtype_setup: boardtype = topaz_wifi <6>[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) <6>[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) <6>[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) <6>[ 0.000000] allocated 4145152 bytes of page_cgroup <6>[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups <6>[ 0.000000] Memory: 101MB 734MB = 835MB total <5>[ 0.000000] Memory: 822288k/822288k available, 188400k reserved, 0K highmem <5>[ 0.000000] Virtual kernel memory layout: <5>[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) <5>[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) <5>[ 0.000000] DMA : 0xff000000 - 0xffe00000 ( 14 MB) <5>[ 0.000000] vmalloc : 0xbf800000 - 0xfa000000 ( 936 MB) <5>[ 0.000000] lowmem : 0x80000000 - 0xbf400000 (1012 MB) <5>[ 0.000000] pkmap : 0x7fe00000 - 0x80000000 ( 2 MB) <5>[ 0.000000] modules : 0x7f000000 - 0x7fe00000 ( 14 MB) <5>[ 0.000000] .init : 0x80008000 - 0x80055000 ( 308 kB) <5>[ 0.000000] .text : 0x80100000 - 0x80b75e44 (10712 kB) <5>[ 0.000000] .data : 0x80c00000 - 0x80c98b80 ( 611 kB) <5>[ 0.000000] .bss : 0x80c98ba4 - 0x811122c4 (4582 kB) <6>[ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 <6>[ 0.000000] Preemptible hierarchical RCU implementation. <6>[ 0.000000] NR_IRQS:855 <6>[ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms <6>[ 0.000000] Console: colour dummy device 80x30 <6>[ 0.150177] Calibrating delay using timer specific routine.. 13.52 BogoMIPS (lpj=67649) <6>[ 0.150268] pid_max: default: 32768 minimum: 301 <6>[ 0.150634] Security Framework initialized <6>[ 0.150695] SELinux: Initializing. <7>[ 0.150787] SELinux: Starting in permissive mode <6>[ 0.150970] Mount-cache hash table entries: 512 <6>[ 0.152252] Initializing cgroup subsys cpuacct <6>[ 0.152404] Initializing cgroup subsys memory <6>[ 0.152496] Initializing cgroup subsys freezer <6>[ 0.152587] CPU: Testing write buffer coherency: ok <6>[ 0.152984] hw perfevents: enabled with ARMv7 Scorpion-MP PMU driver, 5 counters available <4>[ 0.184448] CPU1: Booted secondary processor <6>[ 0.194396] Brought up 2 CPUs <6>[ 0.194427] SMP: Total of 2 processors activated (27.05 BogoMIPS). <6>[ 0.206878] print_constraints: dummy: <3>[ 0.207000] rdev_init_debugfs: Error-Bad Function Input <6>[ 0.207336] NET: Registered protocol family 16 <3>[ 0.207550] AXI: msm_bus_fabric_init_driver(): msm_bus_fabric_init_driver <6>[ 0.209167] msm_rpm_init: RPM firmware 2.0.67653 <4>[ 0.209716] tenderloin_setup_pin_table: using tenderloin_pins_wifi <6>[ 0.210083] saw_probe: id=0, name=8901_s0 <6>[ 0.210449] saw_probe: id=1, name=8901_s1 <6>[ 0.211914] rcg_clk_handoff: gsbi12_uart_clk rate=7372800 <6>[ 0.212005] rcg_clk_handoff: gsbi3_qup_clk rate=24000000 <6>[ 0.212066] rcg_clk_handoff: gsbi4_qup_clk rate=24000000 <6>[ 0.212127] rcg_clk_handoff: gsbi7_qup_clk rate=24000000 <6>[ 0.212188] rcg_clk_handoff: gsbi8_qup_clk rate=24000000 <6>[ 0.212280] rcg_clk_handoff: gsbi9_qup_clk rate=24000000 <6>[ 0.212341] rcg_clk_handoff: sdc1_clk rate=48000000 <6>[ 0.212402] rcg_clk_handoff: usb_hs1_xcvr_clk rate=60000000 <6>[ 0.212493] rcg_clk_handoff: dsi_byte_clk rate=1 <6>[ 0.212585] rcg_clk_handoff: mdp_clk rate=200000000 <6>[ 0.212738] rcg_clk_handoff: pixel_mdp_clk rate=96000000 <6>[ 0.214294] Max ACPU freq: 1512000 KHz <6>[ 0.219909] CPU0: 23 scaling frequencies supported. <6>[ 0.219940] CPU1: 23 scaling frequencies supported. <6>[ 0.221191] pm8058_probe: PMIC revision: E3 <6>[ 0.222229] pm_gpio_probe: OK: base=173, ngpio=40 <6>[ 0.222412] pm8xxx_mpp_probe: OK: base=213, ngpio=12 <6>[ 0.223266] pm8901_probe: PMIC REVISION = F4 <6>[ 0.223602] pm8xxx_mpp_probe: OK: base=225, ngpio=4 <6>[ 0.536468] gpio_vreg_probe: id=225, name=ext_5v, gpio=225, gpio_label=ext_5v_en <3>[ 0.537628] msm_snddev_init <3>[ 0.538269] Registering a6_0 device. <6>[ 0.552429] bio: create slab at 0 <6>[ 0.553741] ION heap vmalloc created <6>[ 0.553802] ION heap mm created at 38800000 with size 3600000 <6>[ 0.553833] ION heap mm_fw created at 38600000 with size 200000 <6>[ 0.553894] ION heap mfc created at 3be00000 with size 2000 <6>[ 0.553955] ION heap sf created at 75e00000 with size 4000000 <6>[ 0.554016] ION heap camera_preview created at 79e00000 with size 4000000 <6>[ 0.554077] ION heap wb created at 7de00000 with size 600000 <6>[ 0.554138] ION heap qsecom created at 7e400000 with size 600000 <6>[ 0.554199] ION heap audio created at 7ea00000 with size 28b000 <5>[ 0.554321] pmic8058_pwm_probe: OK <6>[ 0.554382] klog_init: phys buffer at 0x7ff00000 <6>[ 0.554443] klog_init: virt address at 0xbfe00000 <6>[ 0.554473] klog_init: found valid klog, len 1048576 <6>[ 0.554534] klog_init: using buffer 2 at 0xbfe8000c, length 262116 <5>[ 0.556976] SCSI subsystem initialized <6>[ 0.557220] usbcore: registered new interface driver usbfs <6>[ 0.557342] usbcore: registered new interface driver hub <6>[ 0.557586] usbcore: registered new device driver usb <6>[ 0.557861] Advanced Linux Sound Architecture Driver Version 1.0.24. <6>[ 0.558349] Bluetooth: Core ver 2.16 <6>[ 0.558441] NET: Registered protocol family 31 <6>[ 0.558471] Bluetooth: HCI device and connection manager initialized <6>[ 0.558563] Bluetooth: HCI socket layer initialized <6>[ 0.558715] Switching to clocksource gp_timer <6>[ 0.575134] NET: Registered protocol family 2 <6>[ 0.575317] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) <6>[ 0.575744] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) <6>[ 0.576965] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) <6>[ 0.577667] TCP: Hash tables configured (established 131072 bind 65536) <6>[ 0.577758] TCP reno registered <6>[ 0.577789] UDP hash table entries: 512 (order: 2, 16384 bytes) <6>[ 0.577911] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) <6>[ 0.578369] NET: Registered protocol family 1 <6>[ 0.578857] RPC: Registered named UNIX socket transport module. <6>[ 0.578948] RPC: Registered udp transport module. <6>[ 0.579010] RPC: Registered tcp transport module. <6>[ 0.579071] RPC: Registered tcp NFSv4.1 backchannel transport module. <6>[ 0.579315] Trying to unpack rootfs image as initramfs... <6>[ 1.193084] Freeing initrd memory: 2388K <6>[ 1.193298] PMU: registered new PMU device of type 0 <6>[ 1.193481] PMU: registered new PMU device of type 1 <6>[ 1.194000] ETM/ETB intialized. <6>[ 1.194213] pil_qdsp6v3 pil_qdsp6v3: using non-secure boot <3>[ 1.195037] smd_channel_probe_worker: allocation table not initialized <7>[ 1.199523] gpio_request: gpio-229 (msm_icodec_speaker_right) status -22 <3>[ 1.199584] initialize_msm_icodec_gpios: icodec gpio 229 request failed <3>[ 1.199676] msm_icodec_gpio_probe: GPIO configuration failed <6>[ 1.202239] Powering off BT - ignored <5>[ 1.203308] msm_rpm_log_probe: OK <6>[ 1.203674] audit: initializing netlink socket (disabled) <5>[ 1.203796] type=2000 audit(1.170:1): initialized <6>[ 1.282562] ashmem: initialized <6>[ 1.288513] NTFS driver 2.1.30 [Flags: R/W]. <6>[ 1.288787] fuse init (API version 7.16) <6>[ 1.289001] msgmni has been set to 1610 <7>[ 1.289062] SELinux: Registering netfilter hooks <6>[ 1.290802] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) <6>[ 1.290893] io scheduler noop registered <6>[ 1.290954] io scheduler deadline registered <6>[ 1.291015] io scheduler row registered (default) <6>[ 1.291107] io scheduler cfq registered <4>[ 1.293304] mdp4_csc_config: Block type 10 isn't supported by CSC. <4>[ 1.293395] mdp4_csc_config: Block type 8 isn't supported by CSC. <3>[ 1.296661] lcdc_lg_panel_init: called <6>[ 1.297058] Lcdc_lg_probe: bl_pwm0=b570d800 LPG_chan0=0 <6>[ 1.301025] mdp4_lcdc_vsync_init: ndx=0 <6>[ 1.305480] FrameBuffer[0] 1024x768 size=6291456 bytes is registered successfully! <3>[ 1.305572] pm_runtime: fail to wake up <3>[ 1.305633] lcdc_common_panel_power: on=1 isOn=0 <4>[ 1.309570] mdp4_csc_config: Block type 10 isn't supported by CSC. <4>[ 1.309661] mdp4_csc_config: Block type 8 isn't supported by CSC. <4>[ 1.312591] load_565rle_image: Can not open /initlogo.rle <7>[ 1.312927] Registered led device: lcd-backlight <6>[ 1.312988] mdp4_lcdc_vsync_init: ndx=0 <6>[ 1.313873] <6>[ 1.313903] msm_vidc_enc: Inside vid_enc_init() <6>[ 1.314117] <6>[ 1.314147] msm_vidc_enc: Inside vid_enc_vcd_init() <3>[ 1.381622] msm_serial_hs_init failed to load <6>[ 1.381774] msm_serial_hsl: detected port #0 <6>[ 1.381927] msm_serial_hsl.0: ttyHSL0 at MMIO 0x19c40000 (irq = 227) is a MSM <6>[ 1.382537] msm_serial_hsl: driver initialized <6>[ 1.383758] msm_rotator_probe: rotator_hw_revision=1 <6>[ 1.390075] kgsl kgsl-3d0: |kgsl_gpummu_init| MMU type set for device is GPUMMU <6>[ 1.391571] kgsl kgsl-2d0: |kgsl_gpummu_init| MMU type set for device is GPUMMU <6>[ 1.392761] kgsl kgsl-2d1: |kgsl_gpummu_init| MMU type set for device is GPUMMU <6>[ 1.397827] brd: module loaded <6>[ 1.399993] loop: module loaded <6>[ 1.400207] pmem: Initializing pmem_adsp (user-space) as non-cached <6>[ 1.400604] allocating 6291456 bytes at (null) (7ec8b000 physical) for pmem_adsp <6>[ 1.400756] pmem: Initializing pmem_audio (user-space) as non-cached <6>[ 1.401000] allocating 2666496 bytes at (null) (7f28b000 physical) for pmem_audio <5>[ 1.401397] pm8xxx_upl_probe: OK <4>[ 1.402801] hsuart_tty:created 'ttyHS0' device on UART 0 <4>[ 1.403015] user-pins: configuring irq for gpio 129 <6>[ 1.403411] Initialize hres_counter device <6>[ 1.403533] Before a6 call to i2c_add_driver. <3>[ 1.404724] a6_init_state: enabling A6 internal wake. <3>[ 1.404815] a6_init_state: TS2_I2C_WAKEUP_PERIOD = 0x1b <6>[ 1.452606] A6 Version: HW: 255, FW (M.m.B): 2.13.25, ManID: 28769, ProdTyp: 1281 <5>[ 1.479583] A6 driver initialized successfully! <3>[ 1.480743] a6_init_state: enabling A6 internal wake. <3>[ 1.480865] a6_init_state: TS2_I2C_WAKEUP_PERIOD = 0x1b <6>[ 1.532684] A6 Version: HW: 255, FW (M.m.B): 2.7.29, ManID: 28769, ProdTyp: 1793 <5>[ 1.536132] A6 driver initialized successfully! <4>[ 1.536224] i2c-core: driver [a6] using legacy suspend method <4>[ 1.536315] i2c-core: driver [a6] using legacy resume method <3>[ 1.536712] msm_wm8958_setup_power: codec power setup <3>[ 1.536834] wm8994_ldo_power: Power up the WM8994 LDOs <6>[ 1.568176] wm8994 4-001a: WM8958 revision B <4>[ 1.583618] wm8994 4-001a: No interrupt specified, no interrupts <7>[ 1.583892] gpiochip_find_base: found new base at 501 <3>[ 1.584045] wm8994_resume: CALLED <3>[ 1.584106] wm8994_suspend: CALLED <3>[ 1.588470] msm_wm8958_shutdown_power: codec power shutdown <3>[ 1.588531] wm8994_ldo_power: Power down the WM8994 LDOs <6>[ 1.589691] SCSI Media Changer driver v0.25 <6>[ 1.590576] PPP generic driver version 2.4.2 <6>[ 1.590911] PPP Deflate Compression module registered <6>[ 1.591003] PPP BSD Compression module registered <6>[ 1.592742] PPP MPPE Compression module registered <6>[ 1.592803] NET: Registered protocol family 24 <6>[ 1.592895] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled). <6>[ 1.593017] CSLIP: code copyright 1989 Regents of the University of California. <6>[ 1.593475] tun: Universal TUN/TAP device driver, 1.6 <6>[ 1.593536] tun: (C) 1999-2004 Max Krasnyansky <6>[ 1.593994] usbcore: registered new interface driver asix <6>[ 1.594085] usbcore: registered new interface driver cdc_ether <6>[ 1.594177] usbcore: registered new interface driver net1080 <6>[ 1.594299] usbcore: registered new interface driver cdc_subset <6>[ 1.594390] usbcore: registered new interface driver zaurus <6>[ 1.594482] cdc_ncm: 04-Aug-2011 <6>[ 1.594543] usbcore: registered new interface driver cdc_ncm <6>[ 1.594635] rmnet_init: SMD devices[8] <3>[ 1.600677] Error: Driver 'msm_otg' is already registered, aborting... <6>[ 1.600738] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver <6>[ 1.601013] host driver registered w/ tranceiver <6>[ 1.601165] usbcore: registered new interface driver cdc_acm <6>[ 1.601226] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters <6>[ 1.601348] Initializing USB Mass Storage driver... <6>[ 1.601440] usbcore: registered new interface driver usb-storage <6>[ 1.601531] USB Mass Storage support registered. <6>[ 1.601593] usbcore: registered new interface driver usb_ehset_test <6>[ 1.601898] peripheral driver registered w/ tranceiver <4>[ 1.601989] msm_otg_sm_work 1816 id=0 OTG_STATE_UNDEFINED <6>[ 1.604156] android_usb gadget: Mass Storage Function, version: 2009/09/11 <6>[ 1.604248] android_usb gadget: Number of LUNs=2 <6>[ 1.604309] lun0: LUN: removable file: (no medium) <6>[ 1.604400] lun1: LUN: removable file: (no medium) <6>[ 1.604766] android_usb gadget: android_usb ready <4>[ 1.605072] mousedev: could not register psaux device, error: -16 <6>[ 1.605163] mousedev: PS/2 mouse device common for all mice <6>[ 1.605804] input: gpio-keys as /devices/platform/gpio-keys/input/input0 <3>[ 1.607818] board_cy8ctma395_vdd_enable: enable=1 isPowerOn=0 <6>[ 1.619598] input: pmic8xxx_pwrkey as /devices/platform/msm_ssbi.0/pm8058-core/pm8xxx-pwrkey/input/input1 <6>[ 1.620422] <6>lsm303dlh magnetometer driver <3>[ 1.620513] lsm303dlh_mag_sysfs: probe start <6>[ 1.621063] input: lsm303dlh_mag_sysfs as /devices/i2c-0/0-001e/input/input2 <6>[ 1.621490] lsm303dlh_mag_sysfs 0-001e: lsm303dlh_mag probed <7>[ 1.621612] lsm303dlh_acc_sysfs accelerometer driver: init <6>[ 1.621704] lsm303dlh_acc_sysfs: probe start. <6>[ 1.621765] lsm303dlh_acc_sysfs: hw init start <6>[ 1.622619] lsm303dlh_acc_sysfs: hw init done <6>[ 1.623107] input: lsm303dlh_acc_sysfs as /devices/i2c-0/0-0018/input/input3 <6>[ 1.623474] lsm303dlh_acc_sysfs 0-0018: lsm303dlh_acc_sysfs: probed <4>[ 1.623596] i2c-core: driver [lsm303dlh_acc_sysfs] using legacy suspend method <4>[ 1.623687] i2c-core: driver [lsm303dlh_acc_sysfs] using legacy resume method <6>[ 1.625854] input: isl29023 light sensor as /devices/virtual/input/input4 <6>[ 1.626220] isl29023 0-0044: driver version 1.0 enabled <4>[ 1.626342] i2c-core: driver [isl29023] using legacy suspend method <4>[ 1.626403] i2c-core: driver [isl29023] using legacy resume method <6>[ 1.626525] i2c i2c-0: mpu3050: +lsm303dlha <6>[ 1.626586] i2c i2c-0: mpu3050: +lsm303dlhm <4>[ 1.626647] i2c i2c-0: WARNING: Compass irq not assigned <4>[ 1.626708] i2c i2c-0: mpu3050: No Pressure Present <6>[ 1.640747] i2c i2c-0: Installing irq using 381 <6>[ 1.640808] i2c i2c-0: Module Param interface = mpuirq <4>[ 1.641265] i2c-core: driver [mpu3050] using legacy suspend method <4>[ 1.641357] i2c-core: driver [mpu3050] using legacy resume method <7>[ 1.641448] mpu_init <6>[ 1.642517] using rtc device, pm8xxx_rtc, for alarms <6>[ 1.642608] rtc-pm8xxx rtc-pm8xxx: rtc core: registered pm8xxx_rtc as rtc0 <6>[ 1.642913] i2c /dev entries driver <6>[ 1.644042] Linux video capture interface: v2.00 <6>[ 1.644195] usbcore: registered new interface driver uvcvideo <6>[ 1.644287] USB Video Class driver (v1.1.0) <4>[ 1.644714] +++ config_camera_on_gpios_web_cam_mt9m113 <4>[ 1.645111] config_camera_on_gpios_web_cam_mt9m113:enable the regulator votg_lvs0 succeed <4>[ 1.645782] config_camera_on_gpios_web_cam_mt9m113:enable the regulator votg_vreg_l11 succeed <4>[ 1.645904] --- config_camera_on_gpios_web_cam_mt9m113 <4>[ 1.712280] +++ config_camera_off_gpios_web_cam_mt9m113 <4>[ 1.712615] config_camera_off_gpios_web_cam_mt9m113:disable the regulator: votg_lvs0 succeed <4>[ 1.713012] config_camera_off_gpios_web_cam_mt9m113:disable the regulator: votg_vreg_l11 succeed <4>[ 1.713134] --- config_camera_off_gpios_web_cam_mt9m113 <6>[ 1.713226] msm_sync_init: initialized mt9m113 <6>[ 1.714233] msm_gemini_init gemini: success <6>[ 1.714508] max8903b driver registeration! rc = 0 <5>[ 1.729400] tsens_tm_probe: OK <6>[ 1.729827] device-mapper: uevent: version 1.0.3 <6>[ 1.730346] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com <6>[ 1.730560] Bluetooth: MSM Sleep Mode Driver Ver 1.1 <6>[ 1.731201] cpuidle: using governor ladder <6>[ 1.731262] cpuidle: using governor menu <6>[ 1.731689] mmc0: mci-version: 0 <3>[ 1.731811] mmc0: No card detect facilities available <6>[ 1.732147] mmc0: Qualcomm MSM SDCC-core at 0x0000000012400000 irq 136,0 dma 18 dmacrcri 1 <6>[ 1.732269] mmc0: 8 bit data mode enabled <6>[ 1.732299] mmc0: 4 bit data mode disabled <6>[ 1.732360] mmc0: polling status mode disabled <6>[ 1.732452] mmc0: MMC clock 400000 -> 48000000 Hz, PCLK 0 Hz <6>[ 1.732513] mmc0: Slot eject status = 0 <6>[ 1.732574] mmc0: Power save feature enable = 1 <6>[ 1.732635] mmc0: DM non-cached buffer at ffda0000, dma_addr 0x74040000 <6>[ 1.732727] mmc0: DM cmd busaddr 0x74040000, cmdptr busaddr 0x74057f40 <6>[ 1.733428] mmc1: mci-version: 0 <3>[ 1.734680] mmc1: No card detect facilities available <6>[ 1.734924] mmc1: Qualcomm MSM SDCC-core at 0x00000000121c0000 irq 133,0 dma 21 dmacrcri 5 <6>[ 1.735015] mmc1: 8 bit data mode disabled <6>[ 1.735107] mmc1: 4 bit data mode enabled <6>[ 1.735137] mmc1: polling status mode disabled <6>[ 1.735198] mmc1: MMC clock 400000 -> 48000000 Hz, PCLK 0 Hz <6>[ 1.735290] mmc1: Slot eject status = 0 <6>[ 1.735321] mmc1: Power save feature enable = 1 <6>[ 1.735412] mmc1: DM non-cached buffer at ffd80000, dma_addr 0x74060000 <6>[ 1.735504] mmc1: DM cmd busaddr 0x74060000, cmdptr busaddr 0x74077f40 <4>[ 1.735626] tenderloin_probe_wifi: id 4 mmc b5992000 <7>[ 1.736083] LM8502 module init called <7>[ 1.736175] LM8502 probe called <4>[ 1.829345] msm_otg_sm_work 1819 id=1 OTG_STATE_UNDEFINED <3>[ 1.836944] qup_i2c qup_i2c.3: QUP: I2C status flags :0x1343c8, irq:193 <3>[ 1.837066] qup_i2c qup_i2c.3: I2C slave addr:0x33 not connected <3>[ 1.837127] Unable to read LM8502 registers <7>[ 1.839538] Registered led device: core_navi_left <7>[ 1.840393] Registered led device: core_navi_right <4>[ 1.841918] i2c-core: driver [LM8502] using legacy suspend method <4>[ 1.841979] i2c-core: driver [LM8502] using legacy resume method <6>[ 1.843475] usbcore: registered new interface driver usbhid <6>[ 1.843536] usbhid: USB HID core driver <6>[ 1.844207] logger: created 512K log 'log_main' <6>[ 1.844390] logger: created 256K log 'log_events' <6>[ 1.844573] logger: created 512K log 'log_radio' <6>[ 1.844757] logger: created 256K log 'log_system' <6>[ 1.845428] zram: Created 1 device(s) ... <6>[ 1.845977] usbcore: registered new interface driver snd-usb-audio <6>[ 1.846984] msm-cpu-dai msm-cpu-dai.0: asoc_msm_cpu_probe: dev name msm-cpu-dai.0 <6>[ 1.847229] msm-codec-dai msm-codec-dai.0: asoc_msm_codec_probe: dev name msm-codec-dai.0 <6>[ 1.847473] msm-dsp-audio msm-dsp-audio.0: msm_pcm_probe: dev name msm-dsp-audio.0 <3>[ 1.847991] wm8994_resume: CALLED <3>[ 1.848022] msm_wm8958_setup_power: codec power setup <3>[ 1.848114] wm8994_ldo_power: Power up the WM8994 LDOs <6>[ 1.863311] mmc0: new high speed MMC card at address 0001 <6>[ 1.863861] mmcblk0: mmc0:0001 SEM16G 14.8 GiB <6>[ 1.864135] mmcblk0boot0: mmc0:0001 SEM16G partition 1 1.00 MiB <6>[ 1.864440] mmcblk0boot1: mmc0:0001 SEM16G partition 2 1.00 MiB <6>[ 1.870605] a6_update_connected_ps: ac=0 usb=0 dock=0 (a6_charger_event) <6>[ 1.870697] max8903b_current_setup: ### CHARGE_DISABLE <6>[ 1.871429] msm_otg_suspend: usb in low power mode <6>[ 1.872283] mmcblk0: p1 p2 p3 p4 < p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 > <6>[ 1.879577] mmcblk0boot1: unknown partition table <6>[ 1.881958] mmcblk0boot0: unknown partition table <6>[ 2.116394] Headphone switch initialized, plugged=0 <6>[ 2.120056] asoc: wm8994-aif1 <-> msm-cpu-dai.0 mapping ok <6>[ 2.121246] asoc: wm8994-aif2 <-> msm-cpu-dai.0 mapping ok <6>[ 2.122192] input: msm-audio headset as /devices/platform/soc-audio/sound/card0/input5 <6>[ 2.122741] mvs-cpu-dai mvs-cpu-dai.0: asoc_mvs_cpu_probe: dev name mvs-cpu-dai.0 <6>[ 2.122985] mvs-codec-dai mvs-codec-dai.0: asoc_mvs_codec_probe: dev name mvs-codec-dai.0 <6>[ 2.123229] msm-mvs-audio msm-mvs-audio.0: msm_pcm_probe: dev name msm-mvs-audio.0 <6>[ 2.124328] ALSA device list: <6>[ 2.124359] #0: msm-audio <6>[ 2.124694] oprofile: using arm/armv7-scorpionmp <6>[ 2.124847] GACT probability NOT on <6>[ 2.124908] Mirror/redirect action on <6>[ 2.124969] u32 classifier <6>[ 2.125000] Actions configured <6>[ 2.125061] Netfilter messages via NETLINK v0.30. <6>[ 2.125183] nf_conntrack version 0.5.0 (12885 buckets, 51540 max) <6>[ 2.125640] ctnetlink v0.93: registering with nfnetlink. <6>[ 2.125762] NF_TPROXY: Transparent proxy support initialized, version 4.1.0 <6>[ 2.125854] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd. <6>[ 2.126464] xt_time: kernel timezone is -0000 <6>[ 2.126678] ip_tables: (C) 2000-2006 Netfilter Core Team <6>[ 2.126953] arp_tables: (C) 2002 David S. Miller <6>[ 2.127075] TCP cubic registered <6>[ 2.127136] Initializing XFRM netlink socket <6>[ 2.127655] NET: Registered protocol family 10 <6>[ 2.128692] Mobile IPv6 <6>[ 2.128753] ip6_tables: (C) 2000-2006 Netfilter Core Team <6>[ 2.128936] IPv6 over IPv4 tunneling driver <6>[ 2.129821] NET: Registered protocol family 17 <6>[ 2.129882] NET: Registered protocol family 15 <6>[ 2.130004] L2TP core driver, V2.0 <6>[ 2.130035] PPPoL2TP kernel driver, V2.0 <6>[ 2.130096] L2TP IP encapsulation support (L2TPv3) <6>[ 2.130310] L2TP netlink interface <6>[ 2.130371] NET: Registered protocol family 35 <5>[ 2.130493] Registering the dns_resolver key type <6>[ 2.130584] VFP support v0.3: implementor 51 architecture 64 part 2d variant 0 rev 0 <5>[ 2.130737] Registering SWP/SWPB emulation handler <6>[ 2.139556] clock_late_init() disabled 202 unused clocks <6>[ 2.140258] cpufreq: cpu0 init at 1512000 switching to 1188000 <6>[ 2.141143] cpufreq: cpu1 init at 1512000 switching to 1188000 <6>[ 2.145996] MSM Watchdog Initialized <6>[ 2.147033] msm_hotplug: Device init <3>[ 2.147094] set_dload_mode <0> ( 800154E8 ) <6>[ 2.148284] rtc-pm8xxx rtc-pm8xxx: setting system clock to 2016-02-18 13:39:00 UTC (1455802740) <6>[ 2.148406] msm_v4l2: msm_v4l2_init <4>[ 2.148834] Warning: unable to open an initial console. <6>[ 2.149261] Freeing init memory: 308K <7>[ 2.155487] SELinux: 512 avtab hash slots, 1334 rules. <7>[ 2.156188] SELinux: 512 avtab hash slots, 1334 rules. <7>[ 2.156280] SELinux: 1 users, 2 roles, 289 types, 1 bools, 1 sens, 1024 cats <7>[ 2.156372] SELinux: 84 classes, 1334 rules <7>[ 2.157379] SELinux: Completing initialization. <7>[ 2.157440] SELinux: Setting up existing superblocks. <7>[ 2.157531] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts <7>[ 2.157653] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts <7>[ 2.158233] SELinux: initialized (dev bdev, type bdev), not configured for labeling <7>[ 2.158325] SELinux: initialized (dev proc, type proc), uses genfs_contexts <7>[ 2.158447] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs <7>[ 2.158569] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts <7>[ 2.165496] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs <7>[ 2.165618] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs <7>[ 2.165710] SELinux: initialized (dev anon_inodefs, type anon_inodefs), not configured for labeling <7>[ 2.165832] SELinux: initialized (dev devpts, type devpts), uses transition SIDs <7>[ 2.165954] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts <7>[ 2.166168] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs <7>[ 2.166290] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts <5>[ 2.523345] type=1403 audit(1455802740.870:2): policy loaded auid=4294967295 ses=4294967295 <4>[ 2.523620] SELinux: Loaded policy from /sepolicy <5>[ 2.526611] type=1404 audit(1455802740.870:3): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295 <3>[ 4.989044] healthd: wakealarm_init: timerfd_create failed <3>[ 5.489746] init: cannot open '/initlogo.rle' <7>[ 5.496826] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs <7>[ 5.498687] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs <7>[ 5.500732] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs <7>[ 5.502532] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs <3>[ 5.503204] android_usb: already disabled <6>[ 5.516571] kjournald starting. Commit interval 5 seconds <4>[ 5.516967] EXT3-fs (mmcblk0p13): warning: maximal mount count reached, running e2fsck is recommended <6>[ 5.521209] EXT3-fs (mmcblk0p13): using internal journal <6>[ 5.521484] EXT3-fs (mmcblk0p13): mounted filesystem with writeback data mode <7>[ 5.521820] SELinux: initialized (dev mmcblk0p13, type ext3), uses xattr <3>[ 5.992797] init: Unable to open persistent property directory /data/property errno: 2 <3>[ 6.016662] board_cy8ctma395_vdd_enable: enable=1 isPowerOn=1 <3>[ 6.019775] fs_mgr: Cannot open file /etc/extra.fstab <4>[ 6.033630] EXT4-fs (dm-9): warning: maximal mount count reached, running e2fsck is recommended <7>[ 6.072448] EXT4-fs (dm-9): ext4_orphan_cleanup: deleting unreferenced inode 1591 <7>[ 6.082305] EXT4-fs (dm-9): ext4_orphan_cleanup: deleting unreferenced inode 809 <6>[ 6.083465] EXT4-fs (dm-9): 2 orphan inodes deleted <6>[ 6.083526] EXT4-fs (dm-9): recovery complete <4>[ 6.093322] CPU1: Booted secondary processor <6>[ 6.111511] EXT4-fs (dm-9): mounted filesystem with ordered data mode. Opts: <7>[ 6.111724] SELinux: initialized (dev dm-9, type ext4), uses xattr <6>[ 6.190887] input: HPTouchpad as /devices/virtual/input/input6 <3>[ 6.305236] android_usb: already disabled <6>[ 6.318054] adb_open <6>[ 6.318115] adb_bind_config <6>[ 6.983093] msmsdcc_runtime_suspend: Enter WIFI suspend <6>[ 7.016876] lsm303dlh_acc_sysfs: hw init start <6>[ 7.018707] lsm303dlh_acc_sysfs: hw init done <3>[ 7.293548] fs_mgr: Cannot open file /etc/extra.fstab <4>[ 7.313598] EXT4-fs (dm-9): warning: maximal mount count reached, running e2fsck is recommended <6>[ 7.321838] EXT4-fs (dm-9): mounted filesystem with ordered data mode. Opts: <7>[ 7.322082] SELinux: initialized (dev dm-9, type ext4), uses xattr <6>[ 7.333343] SELinux: Context u:object_r:media_rw_data_file:s0 is not valid (left unmapped). <6>[ 7.503051] [set_pmic_backlight] backlight enabled <6>[ 7.672271] EXT4-fs (dm-8): recovery complete <6>[ 7.674621] EXT4-fs (dm-8): mounted filesystem with ordered data mode. Opts: <7>[ 7.674865] SELinux: initialized (dev dm-8, type ext4), uses xattr <6>[ 7.678466] SELinux: Context u:object_r:recovery_cache_file:s0 is not valid (left unmapped). <4>[ 7.710632] EXT4-fs (dm-9): warning: maximal mount count reached, running e2fsck is recommended <6>[ 7.713439] EXT4-fs (dm-9): mounted filesystem with ordered data mode. Opts: <7>[ 7.713684] SELinux: initialized (dev dm-9, type ext4), uses xattr <6>[ 7.937591] SELinux: Context u:object_r:zoneinfo_data_file:s0 is not valid (left unmapped). <4>[ 11.196502] EXT4-fs (dm-9): warning: maximal mount count reached, running e2fsck is recommended <6>[ 11.201812] EXT4-fs (dm-9): mounted filesystem with ordered data mode. Opts: <7>[ 11.202056] SELinux: initialized (dev dm-9, type ext4), uses xattr <6>[ 13.441864] EXT4-fs (dm-8): mounted filesystem with ordered data mode. Opts: <7>[ 13.442108] SELinux: initialized (dev dm-8, type ext4), uses xattr <6>[ 18.940399] SELinux: Context u:object_r:dalvikcache_profiles_data_file:s0 is not valid (left unmapped). <6>[ 23.402679] EXT4-fs (dm-10): mounted filesystem with ordered data mode. Opts: <7>[ 23.402923] SELinux: initialized (dev dm-10, type ext4), uses xattr <6>[ 23.489562] SysRq : Emergency Remount R/O <6>[ 23.496368] EXT4-fs (dm-8): re-mounted. Opts: (null) <4>[ 23.497467] Emergency Remount complete <4>[ 23.498596] Disabling non-boot CPUs ... <0>[ 23.498718] Restarting system. <4>[ 23.498809] <0>[ 23.498870] Restarting Linux version 3.0.101-cyanogenmod-g2231aef (jc@jc-desk1) (gcc version 4.7 (GCC) ) #1 SMP PREEMPT Mon Mar 17 02:45:12 CDT 2014 <0>[ 23.499176] <3>[ 23.500000] set_dload_mode <0> ( 80167B08 ) <3>[ 23.500244] set_dload_mode <0> ( 80167B10 ) <5>[ 23.500457] Going down for restart now <3>[ 23.500640] pm8xxx_reset_pwr_off, [1] <3>[ 23.500854] pm8xxx_reset_pwr_off, [2] <3>[ 23.501037] pm8xxx_reset_pwr_off, [3] <3>[ 23.501281] pm8xxx_reset_pwr_off, [4] <3>[ 23.501495] pm8xxx_reset_pwr_off, [5] <3>[ 23.509704] pm8xxx_reset_pwr_off, [6] <3>[ 23.509887] pm8xxx_reset_pwr_off, [7] <3>[ 23.510101] pm8xxx_reset_pwr_off, [8] <6>[ 23.510284] arch_reset: Initiating reboot via bootloader Broadcasting: Intent { act=com.evervolv.toolbox.action.DUMPLOGCAT_FINISHED (has extras) } Broadcast completed: result=0