------ LAST KMSG (/proc/last_klog) ------ platform_init_mmu_mappings: entry platform_init_mmu_mappings:57: mapping shared ram as uncached at 0x40000000 platform_init_mmu_mappings: exit platform_init_timer: entry platform_init_timer: exit platform_set_periodic_timer:39: cb 0x4010c6bd, arg 0x0, interval 10 ****************************************** * Welcome to bootie! * Version: 468 ****************************************** mmch_init: entry mmch_init: exit usbc: initialized (rc=0) target_init_buttonscan: entry target_init_board_id: emu=0, product=0x1, hwbuild=1 boardtype=topaz-Wifi-pvt Memory bank 0 -> address: 0x40200000-0x46700000 size:0x06500000 Memory bank 1 -> address: 0x48000000-0x7ff00000 size:0x37F00000 i2c_init: Register GSBI 3 as i2c bus 0 i2c_init_clock: The i2c clock rate is 19200000 i2c_init: Register GSBI 4 as i2c bus 1 i2c_init_clock: The i2c clock rate is 19200000 i2c_init: Register GSBI 9 as i2c bus 2 i2c_init_clock: The i2c clock rate is 19200000 i2c_init: Register GSBI 8 as i2c bus 3 i2c_init_clock: The i2c clock rate is 19200000 i2c_init: Register GSBI 7 as i2c bus 4 i2c_init_clock: The i2c clock rate is 19200000 a6_init_sbw_pins: TCK: 157, TDIO; 158, WKUP: 155 max8903b_gpio_init Starting battery authentication... Battery auth succeeded sys_init: entry Wall message(Boot reason) = 0x77665502 ("recovery") sys_init: booted because 'recovery' mmch_reset: entry Bus(0) Primecell ID regs: 0x80 0x11 0x4 0x0 0xd 0xf0 0x5 0xb1 sdc1_clk_set 400000 mmch_set_active:727: bus 0, active 1 sdc1_clk_set 400000 mmch_reset: exit mmch_set_active:727: bus 0, active 1 sdc1_clk_set 400000 cid: 0x2010053 0x454d3136 0x479051a6 0xf2496efc mfg id: 0x2 oem id: 0x100 name: 'SEM16G' rev: 0x90 sn: 0x51a6f249 date: 6.2011 sdc1_clk_set 50000000 token section is 4096 bytes long target_check_boot_condition: entry Wall message(Boot reason) = 0x77665502 ("recovery") display_init: displayWidth: 1024, displayHeight: 768 Wall message(Boot reason) = 0x77665502 ("recovery") p=100 ca=4862400 v=4172400 i=0 autobooting with 'fsboot' command loading file '/boot/uImage' to address 0x41000000 parse_uimage:241: uimage 0x41000000 <6>[ 0.000000] Booting Linux on physical CPU 0 <6>[ 0.000000] Initializing cgroup subsys cpu <5>[ 0.000000] Linux version 3.0.101-cyanogenmod-gee9eb08 (flintman@mx.thenoblealliance.com) (gcc version 4.7 (GCC) ) #2 SMP PREEMPT Fri Apr 25 06:21:30 EDT 2014 <4>[ 0.000000] CPU: ARMv7 Processor [510f02d2] revision 2 (ARMv7), cr=10c5387d <4>[ 0.000000] CPU: VIPT nonaliasing data cache, VIVT ASID tagged instruction cache <4>[ 0.000000] Machine: TENDERLOIN <6>[ 0.000000] memory pool 0 (start 38000000 size 600000) initialized <6>[ 0.000000] memory pool 1 (start 38600000 size 3802000) initialized <6>[ 0.000000] memory pool 3 (start 75e00000 size 9800000) initialized <4>[ 0.000000] Memory policy: ECC disabled, Data cache writealloc <3>[ 0.000000] smem_find(137, 72): wrong size 64 <6>[ 0.000000] socinfo_init: v5, id=86, ver=2.0, raw_id=1696, raw_ver=1696, hw_plat=0, hw_plat_ver=65536 <6>[ 0.000000] accessory_chip=0 <7>[ 0.000000] On node 0 totalpages: 213760 <7>[ 0.000000] free_area_init_node: node 0, pgdat 80b93be0, node_mem_map 81011000 <7>[ 0.000000] Normal zone: 2024 pages used for memmap <7>[ 0.000000] Normal zone: 0 pages reserved <7>[ 0.000000] Normal zone: 211736 pages, LIFO batch:31 <6>[ 0.000000] passing from bootie 6291456 bytes at 7f600000 physical for fb <6>[ 0.000000] PERCPU: Embedded 8 pages/cpu @81803000 s9536 r8192 d15040 u32768 <7>[ 0.000000] pcpu-alloc: s9536 r8192 d15040 u32768 alloc=8*4096 <7>[ 0.000000] pcpu-alloc: [0] 0 [0] 1 <4>[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 211736 <5>[ 0.000000] Kernel command line: root=/dev/ram0 rootwait ro fbcon=disable console=ttyS0,115200n8 androidboot.serialno=HCT4FRK810A5881F3UVRRJCOIBGT9N94 fb=0x7f600000 nduid=19572f6354108a2805873cffdb723c271ce9e622 klog=0x7ff00000 klog_len=0x100000 boardtype=topaz-Wifi-pvt lastboot=recovery <4>[ 0.000000] boardtype_setup: boardtype_str = topaz-Wifi-pvt <4>[ 0.000000] boardtype_setup: boardtype = topaz_wifi <6>[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) <6>[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) <6>[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) <6>[ 0.000000] allocated 4145152 bytes of page_cgroup <6>[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups <6>[ 0.000000] Memory: 101MB 734MB = 835MB total <5>[ 0.000000] Memory: 822908k/822908k available, 187780k reserved, 0K highmem <5>[ 0.000000] Virtual kernel memory layout: <5>[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) <5>[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) <5>[ 0.000000] DMA : 0xff000000 - 0xffe00000 ( 14 MB) <5>[ 0.000000] vmalloc : 0xbf800000 - 0xfa000000 ( 936 MB) <5>[ 0.000000] lowmem : 0x80000000 - 0xbf400000 (1012 MB) <5>[ 0.000000] pkmap : 0x7fe00000 - 0x80000000 ( 2 MB) <5>[ 0.000000] modules : 0x7f000000 - 0x7fe00000 ( 14 MB) <5>[ 0.000000] .init : 0x80008000 - 0x80054000 ( 304 kB) <5>[ 0.000000] .text : 0x80100000 - 0x80a71de8 (9672 kB) <5>[ 0.000000] .data : 0x80b00000 - 0x80b96300 ( 601 kB) <5>[ 0.000000] .bss : 0x80b96324 - 0x8100ca04 (4570 kB) <6>[ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 <6>[ 0.000000] Preemptible hierarchical RCU implementation. <6>[ 0.000000] NR_IRQS:855 <6>[ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms <6>[ 0.000000] Console: colour dummy device 80x30 <6>[ 0.150177] Calibrating delay using timer specific routine.. 13.52 BogoMIPS (lpj=67646) <6>[ 0.150268] pid_max: default: 32768 minimum: 301 <6>[ 0.150756] Mount-cache hash table entries: 512 <6>[ 0.151947] Initializing cgroup subsys cpuacct <6>[ 0.152069] Initializing cgroup subsys memory <6>[ 0.152160] Initializing cgroup subsys freezer <6>[ 0.152282] CPU: Testing write buffer coherency: ok <6>[ 0.152648] hw perfevents: enabled with ARMv7 Scorpion-MP PMU driver, 5 counters available <4>[ 0.184082] CPU1: Booted secondary processor <6>[ 0.194000] Brought up 2 CPUs <6>[ 0.194030] SMP: Total of 2 processors activated (27.05 BogoMIPS). <6>[ 0.206329] print_constraints: dummy: <3>[ 0.206420] rdev_init_debugfs: Error-Bad Function Input <6>[ 0.206756] NET: Registered protocol family 16 <3>[ 0.206970] AXI: msm_bus_fabric_init_driver(): msm_bus_fabric_init_driver <6>[ 0.208557] msm_rpm_init: RPM firmware 2.0.67653 <4>[ 0.209106] tenderloin_setup_pin_table: using tenderloin_pins_wifi <6>[ 0.209503] saw_probe: id=0, name=8901_s0 <6>[ 0.209838] saw_probe: id=1, name=8901_s1 <6>[ 0.211273] rcg_clk_handoff: gsbi12_uart_clk rate=7372800 <6>[ 0.211334] rcg_clk_handoff: gsbi3_qup_clk rate=24000000 <6>[ 0.211395] rcg_clk_handoff: gsbi4_qup_clk rate=24000000 <6>[ 0.211486] rcg_clk_handoff: gsbi7_qup_clk rate=24000000 <6>[ 0.211547] rcg_clk_handoff: gsbi8_qup_clk rate=24000000 <6>[ 0.211608] rcg_clk_handoff: gsbi9_qup_clk rate=24000000 <6>[ 0.211700] rcg_clk_handoff: sdc1_clk rate=48000000 <6>[ 0.211761] rcg_clk_handoff: usb_hs1_xcvr_clk rate=60000000 <6>[ 0.211853] rcg_clk_handoff: dsi_byte_clk rate=1 <6>[ 0.211944] rcg_clk_handoff: mdp_clk rate=200000000 <6>[ 0.212097] rcg_clk_handoff: pixel_mdp_clk rate=96000000 <6>[ 0.213592] Max ACPU freq: 1782000 KHz <6>[ 0.213653] Initial ACPU freq: 1512000 KHz <6>[ 0.221069] CPU0: 28 scaling frequencies supported. <6>[ 0.221099] CPU1: 28 scaling frequencies supported. <6>[ 0.222351] pm8058_probe: PMIC revision: E3 <6>[ 0.223388] pm_gpio_probe: OK: base=173, ngpio=40 <6>[ 0.223571] pm8xxx_mpp_probe: OK: base=213, ngpio=12 <6>[ 0.224487] pm8901_probe: PMIC REVISION = F4 <6>[ 0.224792] pm8xxx_mpp_probe: OK: base=225, ngpio=4 <3>[ 0.537994] msm_snddev_init <3>[ 0.538604] Registering a6_0 device. <6>[ 0.552673] bio: create slab at 0 <6>[ 0.553955] ION heap vmalloc created <6>[ 0.554016] ION heap mm created at 38800000 with size 3600000 <6>[ 0.554046] ION heap mm_fw created at 38600000 with size 200000 <6>[ 0.554107] ION heap mfc created at 3be00000 with size 2000 <6>[ 0.554168] ION heap sf created at 75e00000 with size 4000000 <6>[ 0.554260] ION heap camera_preview created at 79e00000 with size 4000000 <6>[ 0.554321] ION heap wb created at 7de00000 with size 600000 <6>[ 0.554382] ION heap qsecom created at 7e400000 with size 600000 <6>[ 0.554412] ION heap audio created at 7ea00000 with size 28b000 <5>[ 0.554565] pmic8058_pwm_probe: OK <6>[ 0.554626] klog_init: phys buffer at 0x7ff00000 <6>[ 0.554687] klog_init: virt address at 0xbfe00000 <6>[ 0.554718] klog_init: found valid klog, len 1048576 <6>[ 0.554779] klog_init: using buffer 3 at 0xbfec0000, length 262116 <5>[ 0.556427] SCSI subsystem initialized <6>[ 0.556671] usbcore: registered new interface driver usbfs <6>[ 0.556793] usbcore: registered new interface driver hub <6>[ 0.557037] usbcore: registered new device driver usb <6>[ 0.557342] Advanced Linux Sound Architecture Driver Version 1.0.24. <6>[ 0.557830] Bluetooth: Core ver 2.16 <6>[ 0.557922] NET: Registered protocol family 31 <6>[ 0.557983] Bluetooth: HCI device and connection manager initialized <6>[ 0.558074] Bluetooth: HCI socket layer initialized <6>[ 0.558227] Switching to clocksource gp_timer <6>[ 0.572357] NET: Registered protocol family 2 <6>[ 0.572509] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) <6>[ 0.572906] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) <6>[ 0.574157] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) <6>[ 0.574859] TCP: Hash tables configured (established 131072 bind 65536) <6>[ 0.574920] TCP reno registered <6>[ 0.574981] UDP hash table entries: 512 (order: 2, 16384 bytes) <6>[ 0.575073] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) <6>[ 0.575500] NET: Registered protocol family 1 <6>[ 0.575927] RPC: Registered named UNIX socket transport module. <6>[ 0.576019] RPC: Registered udp transport module. <6>[ 0.576080] RPC: Registered tcp transport module. <6>[ 0.576141] RPC: Registered tcp NFSv4.1 backchannel transport module. <6>[ 0.576354] Trying to unpack rootfs image as initramfs... <6>[ 0.699890] Freeing initrd memory: 2816K <6>[ 0.700134] PMU: registered new PMU device of type 0 <6>[ 0.700317] PMU: registered new PMU device of type 1 <6>[ 0.700775] ETM/ETB intialized. <6>[ 0.700927] pil_qdsp6v3 pil_qdsp6v3: using non-secure boot <3>[ 0.701690] smd_channel_probe_worker: allocation table not initialized <7>[ 0.706237] gpio_request: gpio-229 (msm_icodec_speaker_right) status -22 <3>[ 0.706329] initialize_msm_icodec_gpios: icodec gpio 229 request failed <3>[ 0.706420] msm_icodec_gpio_probe: GPIO configuration failed <6>[ 0.709045] Powering off BT - ignored <5>[ 0.710113] msm_rpm_log_probe: OK <6>[ 0.710479] audit: initializing netlink socket (disabled) <5>[ 0.710571] type=2000 audit(0.680:1): initialized <6>[ 0.787750] ashmem: initialized <6>[ 0.793762] fuse init (API version 7.16) <6>[ 0.794006] msgmni has been set to 1612 <6>[ 0.795379] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) <6>[ 0.795471] io scheduler noop registered <6>[ 0.795532] io scheduler deadline registered <6>[ 0.795593] io scheduler row registered (default) <6>[ 0.795684] io scheduler cfq registered <4>[ 0.797821] mdp4_csc_config: Block type 10 isn't supported by CSC. <4>[ 0.797912] mdp4_csc_config: Block type 8 isn't supported by CSC. <3>[ 0.801208] lcdc_lg_panel_init: called <6>[ 0.801574] Lcdc_lg_probe: bl_pwm0=b570d600 LPG_chan0=0 <6>[ 0.805572] mdp4_lcdc_vsync_init: ndx=0 <6>[ 0.810058] FrameBuffer[0] 1024x768 size=6291456 bytes is registered successfully! <3>[ 0.810150] pm_runtime: fail to wake up <3>[ 0.810211] lcdc_common_panel_power: on=1 isOn=0 <4>[ 0.832183] mdp4_csc_config: Block type 10 isn't supported by CSC. <4>[ 0.832244] mdp4_csc_config: Block type 8 isn't supported by CSC. <4>[ 0.835174] load_565rle_image: Can not open /initlogo.rle <7>[ 0.835479] Registered led device: lcd-backlight <6>[ 0.835540] mdp4_lcdc_vsync_init: ndx=0 <6>[ 0.836364] <6>[ 0.836395] msm_vidc_enc: Inside vid_enc_init() <6>[ 0.836608] <6>[ 0.836639] msm_vidc_enc: Inside vid_enc_vcd_init() <3>[ 0.907623] msm_serial_hs_init failed to load <6>[ 0.907806] msm_serial_hsl: detected port #0 <6>[ 0.907928] msm_serial_hsl.0: ttyHSL0 at MMIO 0x19c40000 (irq = 227) is a MSM <6>[ 0.908599] msm_serial_hsl: driver initialized <6>[ 0.909851] msm_rotator_probe: rotator_hw_revision=1 <6>[ 0.916107] kgsl kgsl-3d0: |kgsl_gpummu_init| MMU type set for device is GPUMMU <6>[ 0.917572] kgsl kgsl-2d0: |kgsl_gpummu_init| MMU type set for device is GPUMMU <6>[ 0.918823] kgsl kgsl-2d1: |kgsl_gpummu_init| MMU type set for device is GPUMMU <6>[ 0.923706] brd: module loaded <6>[ 0.925720] loop: module loaded <6>[ 0.925933] pmem: Initializing pmem_adsp (user-space) as non-cached <6>[ 0.926330] allocating 6291456 bytes at (null) (7ec8b000 physical) for pmem_adsp <6>[ 0.926483] pmem: Initializing pmem_audio (user-space) as non-cached <6>[ 0.926727] allocating 2666496 bytes at (null) (7f28b000 physical) for pmem_audio <5>[ 0.927124] pm8xxx_upl_probe: OK <4>[ 0.928588] hsuart_tty:created 'ttyHS0' device on UART 0 <4>[ 0.928802] user-pins: configuring irq for gpio 129 <6>[ 0.929229] Initialize hres_counter device <6>[ 0.929321] Before a6 call to i2c_add_driver. <3>[ 0.930480] a6_init_state: enabling A6 internal wake. <3>[ 0.930541] a6_init_state: TS2_I2C_WAKEUP_PERIOD = 0x1b <6>[ 0.984466] A6 Version: HW: 255, FW (M.m.B): 2.13.25, ManID: 28769, ProdTyp: 1281 <5>[ 1.013671] A6 driver initialized successfully! <3>[ 1.014862] a6_init_state: enabling A6 internal wake. <3>[ 1.014923] a6_init_state: TS2_I2C_WAKEUP_PERIOD = 0x1b <6>[ 1.062011] A6 Version: HW: 255, FW (M.m.B): 2.7.29, ManID: 28769, ProdTyp: 1793 <5>[ 1.065460] A6 driver initialized successfully! <4>[ 1.065551] i2c-core: driver [a6] using legacy suspend method <4>[ 1.065643] i2c-core: driver [a6] using legacy resume method <3>[ 1.066040] msm_wm8958_setup_power: codec power setup <3>[ 1.066162] wm8994_ldo_power: Power up the WM8994 LDOs <6>[ 1.097503] wm8994 4-001a: WM8958 revision B <4>[ 1.112945] wm8994 4-001a: No interrupt specified, no interrupts <7>[ 1.113220] gpiochip_find_base: found new base at 501 <3>[ 1.113372] wm8994_resume: CALLED <3>[ 1.113403] wm8994_suspend: CALLED <3>[ 1.117767] msm_wm8958_shutdown_power: codec power shutdown <3>[ 1.117858] wm8994_ldo_power: Power down the WM8994 LDOs <6>[ 1.119049] SCSI Media Changer driver v0.25 <6>[ 1.119873] PPP generic driver version 2.4.2 <6>[ 1.120208] PPP Deflate Compression module registered <6>[ 1.120269] PPP BSD Compression module registered <6>[ 1.121612] PPP MPPE Compression module registered <6>[ 1.121673] NET: Registered protocol family 24 <6>[ 1.121765] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled). <6>[ 1.121887] CSLIP: code copyright 1989 Regents of the University of California. <6>[ 1.122314] tun: Universal TUN/TAP device driver, 1.6 <6>[ 1.122406] tun: (C) 1999-2004 Max Krasnyansky <6>[ 1.122833] usbcore: registered new interface driver asix <6>[ 1.122955] usbcore: registered new interface driver cdc_ether <6>[ 1.123046] usbcore: registered new interface driver net1080 <6>[ 1.123138] usbcore: registered new interface driver cdc_subset <6>[ 1.123229] usbcore: registered new interface driver zaurus <6>[ 1.123321] cdc_ncm: 04-Aug-2011 <6>[ 1.123413] usbcore: registered new interface driver cdc_ncm <6>[ 1.123474] rmnet_init: SMD devices[8] <3>[ 1.129486] Error: Driver 'msm_otg' is already registered, aborting... <6>[ 1.129577] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver <6>[ 1.129821] host driver registered w/ tranceiver <6>[ 1.130004] usbcore: registered new interface driver cdc_acm <6>[ 1.130065] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters <6>[ 1.130157] Initializing USB Mass Storage driver... <6>[ 1.130279] usbcore: registered new interface driver usb-storage <6>[ 1.130340] USB Mass Storage support registered. <6>[ 1.130432] usbcore: registered new interface driver usb_ehset_test <6>[ 1.130737] peripheral driver registered w/ tranceiver <4>[ 1.130828] msm_otg_sm_work 1816 id=0 OTG_STATE_UNDEFINED <6>[ 1.133026] android_usb gadget: Mass Storage Function, version: 2009/09/11 <6>[ 1.133117] android_usb gadget: Number of LUNs=2 <6>[ 1.133178] lun0: LUN: removable file: (no medium) <6>[ 1.133239] lun1: LUN: removable file: (no medium) <6>[ 1.133575] android_usb gadget: android_usb ready <4>[ 1.133880] mousedev: could not register psaux device, error: -16 <6>[ 1.133972] mousedev: PS/2 mouse device common for all mice <6>[ 1.134613] input: gpio-keys as /devices/platform/gpio-keys/input/input0 <3>[ 1.136657] board_cy8ctma395_vdd_enable: enable=1 isPowerOn=0 <6>[ 1.148803] input: pmic8xxx_pwrkey as /devices/platform/msm_ssbi.0/pm8058-core/pm8xxx-pwrkey/input/input1 <6>[ 1.149627] <6>lsm303dlh magnetometer driver <3>[ 1.149719] lsm303dlh_mag_sysfs: probe start <6>[ 1.150268] input: lsm303dlh_mag_sysfs as /devices/i2c-0/0-001e/input/input2 <6>[ 1.150695] lsm303dlh_mag_sysfs 0-001e: lsm303dlh_mag probed <7>[ 1.150817] lsm303dlh_acc_sysfs accelerometer driver: init <6>[ 1.150909] lsm303dlh_acc_sysfs: probe start. <6>[ 1.150970] lsm303dlh_acc_sysfs: hw init start <6>[ 1.151824] lsm303dlh_acc_sysfs: hw init done <6>[ 1.152313] input: lsm303dlh_acc_sysfs as /devices/i2c-0/0-0018/input/input3 <6>[ 1.152679] lsm303dlh_acc_sysfs 0-0018: lsm303dlh_acc_sysfs: probed <4>[ 1.152801] i2c-core: driver [lsm303dlh_acc_sysfs] using legacy suspend method <4>[ 1.152893] i2c-core: driver [lsm303dlh_acc_sysfs] using legacy resume method <6>[ 1.155059] input: isl29023 light sensor as /devices/virtual/input/input4 <6>[ 1.155426] isl29023 0-0044: driver version 1.0 enabled <4>[ 1.155548] i2c-core: driver [isl29023] using legacy suspend method <4>[ 1.155609] i2c-core: driver [isl29023] using legacy resume method <6>[ 1.155731] i2c i2c-0: mpu3050: +lsm303dlha <6>[ 1.155792] i2c i2c-0: mpu3050: +lsm303dlhm <4>[ 1.155853] i2c i2c-0: WARNING: Compass irq not assigned <4>[ 1.155914] i2c i2c-0: mpu3050: No Pressure Present <6>[ 1.170043] i2c i2c-0: Installing irq using 381 <6>[ 1.170135] i2c i2c-0: Module Param interface = mpuirq <4>[ 1.170593] i2c-core: driver [mpu3050] using legacy suspend method <4>[ 1.170684] i2c-core: driver [mpu3050] using legacy resume method <7>[ 1.170776] mpu_init <6>[ 1.171875] using rtc device, pm8xxx_rtc, for alarms <6>[ 1.171966] rtc-pm8xxx rtc-pm8xxx: rtc core: registered pm8xxx_rtc as rtc0 <6>[ 1.172271] i2c /dev entries driver <6>[ 1.173400] Linux video capture interface: v2.00 <6>[ 1.173553] usbcore: registered new interface driver uvcvideo <6>[ 1.173614] USB Video Class driver (v1.1.0) <4>[ 1.174041] +++ config_camera_on_gpios_web_cam_mt9m113 <4>[ 1.174438] config_camera_on_gpios_web_cam_mt9m113:enable the regulator votg_lvs0 succeed <4>[ 1.175140] config_camera_on_gpios_web_cam_mt9m113:enable the regulator votg_vreg_l11 succeed <4>[ 1.175231] --- config_camera_on_gpios_web_cam_mt9m113 <4>[ 1.241638] +++ config_camera_off_gpios_web_cam_mt9m113 <4>[ 1.241973] config_camera_off_gpios_web_cam_mt9m113:disable the regulator: votg_lvs0 succeed <4>[ 1.242370] config_camera_off_gpios_web_cam_mt9m113:disable the regulator: votg_vreg_l11 succeed <4>[ 1.242492] --- config_camera_off_gpios_web_cam_mt9m113 <6>[ 1.242584] msm_sync_init: initialized mt9m113 <6>[ 1.243591] msm_gemini_init gemini: success <6>[ 1.243865] max8903b driver registeration! rc = 0 <5>[ 1.258758] tsens_tm_probe: OK <6>[ 1.259155] device-mapper: uevent: version 1.0.3 <6>[ 1.259643] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com <6>[ 1.259857] Bluetooth: MSM Sleep Mode Driver Ver 1.1 <6>[ 1.260559] cpuidle: using governor ladder <6>[ 1.260620] cpuidle: using governor menu <6>[ 1.261016] mmc0: mci-version: 0 <3>[ 1.261138] mmc0: No card detect facilities available <6>[ 1.261383] mmc0: Qualcomm MSM SDCC-core at 0x0000000012400000 irq 136,0 dma 18 dmacrcri 1 <6>[ 1.261505] mmc0: 8 bit data mode enabled <6>[ 1.261535] mmc0: 4 bit data mode disabled <6>[ 1.261596] mmc0: polling status mode disabled <6>[ 1.261657] mmc0: MMC clock 400000 -> 48000000 Hz, PCLK 0 Hz <6>[ 1.261718] mmc0: Slot eject status = 0 <6>[ 1.261779] mmc0: Power save feature enable = 1 <6>[ 1.261840] mmc0: DM non-cached buffer at ffda0000, dma_addr 0x74000000 <6>[ 1.261932] mmc0: DM cmd busaddr 0x74000000, cmdptr busaddr 0x74017f40 <6>[ 1.262237] mmc1: mci-version: 0 <3>[ 1.263916] mmc1: No card detect facilities available <6>[ 1.264160] mmc1: Qualcomm MSM SDCC-core at 0x00000000121c0000 irq 133,0 dma 21 dmacrcri 5 <6>[ 1.264251] mmc1: 8 bit data mode disabled <6>[ 1.264312] mmc1: 4 bit data mode enabled <6>[ 1.264373] mmc1: polling status mode disabled <6>[ 1.264434] mmc1: MMC clock 400000 -> 48000000 Hz, PCLK 0 Hz <6>[ 1.264495] mmc1: Slot eject status = 0 <6>[ 1.264556] mmc1: Power save feature enable = 1 <6>[ 1.264617] mmc1: DM non-cached buffer at ffd80000, dma_addr 0x74020000 <6>[ 1.264709] mmc1: DM cmd busaddr 0x74020000, cmdptr busaddr 0x74037f40 <4>[ 1.264801] tenderloin_probe_wifi: id 4 mmc b458d000 <7>[ 1.265289] LM8502 module init called <7>[ 1.265380] LM8502 probe called <4>[ 1.359039] msm_otg_sm_work 1819 id=1 OTG_STATE_UNDEFINED <3>[ 1.365661] qup_i2c qup_i2c.3: QUP: I2C status flags :0x1343c8, irq:193 <3>[ 1.365783] qup_i2c qup_i2c.3: I2C slave addr:0x33 not connected <3>[ 1.365844] Unable to read LM8502 registers <7>[ 1.368255] Registered led device: core_navi_left <7>[ 1.369110] Registered led device: core_navi_right <4>[ 1.370635] i2c-core: driver [LM8502] using legacy suspend method <4>[ 1.370727] i2c-core: driver [LM8502] using legacy resume method <6>[ 1.372192] usbcore: registered new interface driver usbhid <6>[ 1.372253] usbhid: USB HID core driver <6>[ 1.372863] logger: created 512K log 'log_main' <6>[ 1.373046] logger: created 256K log 'log_events' <6>[ 1.373229] logger: created 512K log 'log_radio' <6>[ 1.373413] logger: created 256K log 'log_system' <6>[ 1.374053] zram: Created 1 device(s) ... <6>[ 1.374542] usbcore: registered new interface driver snd-usb-audio <6>[ 1.375427] msm-cpu-dai msm-cpu-dai.0: asoc_msm_cpu_probe: dev name msm-cpu-dai.0 <6>[ 1.375671] msm-codec-dai msm-codec-dai.0: asoc_msm_codec_probe: dev name msm-codec-dai.0 <6>[ 1.375885] msm-dsp-audio msm-dsp-audio.0: msm_pcm_probe: dev name msm-dsp-audio.0 <3>[ 1.376342] wm8994_resume: CALLED <3>[ 1.376403] msm_wm8958_setup_power: codec power setup <3>[ 1.376495] wm8994_ldo_power: Power up the WM8994 LDOs <6>[ 1.381134] mmc0: new high speed MMC card at address 0001 <6>[ 1.381622] mmcblk0: mmc0:0001 SEM16G 14.8 GiB <6>[ 1.381896] mmcblk0boot0: mmc0:0001 SEM16G partition 1 1.00 MiB <6>[ 1.382171] mmcblk0boot1: mmc0:0001 SEM16G partition 2 1.00 MiB <6>[ 1.390045] mmcblk0: p1 p2 p3 p4 < p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 > <6>[ 1.395233] mmcblk0boot1: unknown partition table <6>[ 1.397369] mmcblk0boot0: unknown partition table <6>[ 1.399932] a6_update_connected_ps: ac=0 usb=0 dock=0 <6>[ 1.399993] max8903b_current_setup: ### CHARGE_DISABLE <6>[ 1.628784] usb_reset: usb: notify offline <7>[ 1.628845] usb: composite_disconnect <7>[ 1.629119] usb: android_work config= (null),connected=0,sw_connected=0 <6>[ 1.629211] android_work: did not send uevent (0 0 (null)) <6>[ 1.645935] Headphone switch initialized, plugged=0 <6>[ 1.649414] asoc: wm8994-aif1 <-> msm-cpu-dai.0 mapping ok <6>[ 1.650573] asoc: wm8994-aif2 <-> msm-cpu-dai.0 mapping ok <6>[ 1.651519] input: msm-audio headset as /devices/platform/soc-audio/sound/card0/input5 <6>[ 1.652069] mvs-cpu-dai mvs-cpu-dai.0: asoc_mvs_cpu_probe: dev name mvs-cpu-dai.0 <6>[ 1.652313] mvs-codec-dai mvs-codec-dai.0: asoc_mvs_codec_probe: dev name mvs-codec-dai.0 <6>[ 1.652557] msm-mvs-audio msm-mvs-audio.0: msm_pcm_probe: dev name msm-mvs-audio.0 <6>[ 1.653656] ALSA device list: <6>[ 1.653717] #0: msm-audio <6>[ 1.654022] oprofile: using arm/armv7-scorpionmp <6>[ 1.654205] GACT probability NOT on <6>[ 1.654266] Mirror/redirect action on <6>[ 1.654296] u32 classifier <6>[ 1.654357] Actions configured <6>[ 1.654388] Netfilter messages via NETLINK v0.30. <6>[ 1.654510] nf_conntrack version 0.5.0 (12901 buckets, 51604 max) <6>[ 1.654998] ctnetlink v0.93: registering with nfnetlink. <6>[ 1.655120] NF_TPROXY: Transparent proxy support initialized, version 4.1.0 <6>[ 1.655212] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd. <6>[ 1.655822] xt_time: kernel timezone is -0000 <6>[ 1.656066] ip_tables: (C) 2000-2006 Netfilter Core Team <6>[ 1.656311] arp_tables: (C) 2002 David S. Miller <6>[ 1.656433] TCP cubic registered <6>[ 1.656463] Initializing XFRM netlink socket <6>[ 1.656982] NET: Registered protocol family 10 <6>[ 1.658020] Mobile IPv6 <6>[ 1.658081] ip6_tables: (C) 2000-2006 Netfilter Core Team <6>[ 1.658264] IPv6 over IPv4 tunneling driver <6>[ 1.659118] NET: Registered protocol family 17 <6>[ 1.659210] NET: Registered protocol family 15 <6>[ 1.659301] L2TP core driver, V2.0 <6>[ 1.659332] PPPoL2TP kernel driver, V2.0 <6>[ 1.659393] L2TP IP encapsulation support (L2TPv3) <6>[ 1.659606] L2TP netlink interface <6>[ 1.659667] NET: Registered protocol family 35 <5>[ 1.659790] Registering the dns_resolver key type <6>[ 1.659881] VFP support v0.3: implementor 51 architecture 64 part 2d variant 0 rev 0 <5>[ 1.660003] Registering SWP/SWPB emulation handler <6>[ 1.667114] clock_late_init() disabled 201 unused clocks <6>[ 1.667846] cpufreq: cpu0 init at 1512000 switching to 1188000 <6>[ 1.668731] cpufreq: cpu1 init at 1512000 switching to 1188000 <6>[ 1.673614] MSM Watchdog Initialized <3>[ 1.674224] set_dload_mode <0> ( 80015308 ) <6>[ 1.675354] rtc-pm8xxx rtc-pm8xxx: setting system clock to 2014-05-18 03:23:35 UTC (1400383415) <6>[ 1.675476] msm_v4l2: msm_v4l2_init <4>[ 1.675872] Warning: unable to open an initial console. <6>[ 1.676300] Freeing init memory: 304K <3>[ 1.682495] init: invalid uid 'fm_radio' <3>[ 1.682800] init: invalid uid 'felicaclient' <3>[ 1.682861] init: invalid uid 'felicaclient' <3>[ 1.682922] init: invalid uid 'felicalock' <3>[ 1.682983] init: invalid uid 'felicaclient' <3>[ 1.683044] init: invalid uid 'felicaclient' <3>[ 1.683105] init: invalid uid 'felicaclient' <3>[ 1.683197] init: invalid uid 'felicaclient' <3>[ 1.683258] init: invalid uid 'felicaclient' <3>[ 1.683319] init: invalid uid 'autobot_access' <3>[ 2.015563] init: cannot open '/initlogo.rle' <6>[ 2.022644] kjournald starting. Commit interval 5 seconds <4>[ 2.023040] EXT3-fs (mmcblk0p13): warning: maximal mount count reached, running e2fsck is recommended <6>[ 2.030303] EXT3-fs (mmcblk0p13): using internal journal <6>[ 2.030517] EXT3-fs (mmcblk0p13): mounted filesystem with writeback data mode <4>[ 2.699401] UDC-CHG (2-1): usb_multi_chg_detect (551) : D+/D- = 0x0 <4>[ 2.699645] UDC-CHG (2-1-1-2): usb_multi_chg_detect (563) : 10W Adaptor(2000mA)! <6>[ 2.743591] a6_update_connected_ps: ac=1 usb=0 dock=0 <6>[ 2.743804] max8903b_current_setup: CURRENT_750(4), 900(5), 1000(6), 1400(7), 2000MA(9): 9 <6>[ 2.940307] msm_otg_suspend: usb in low power mode <3>[ 2.986877] android_usb: already disabled <3>[ 2.987884] init: Unable to open persistent property directory /data/property errno: 2 <3>[ 3.201446] android_usb: already disabled <3>[ 3.221771] board_cy8ctma395_vdd_enable: enable=1 isPowerOn=1 <6>[ 3.222137] adb_open <6>[ 3.222198] adb_bind_config <6>[ 3.396026] input: HPTouchpad as /devices/virtual/input/input6 <6>[ 3.433898] lsm303dlh_acc_sysfs: hw init start <6>[ 3.435028] lsm303dlh_acc_sysfs: hw init done <6>[ 3.471191] EXT4-fs (dm-9): mounted filesystem with ordered data mode. Opts: (null) <4>[ 3.487152] EXT4-fs (dm-10): warning: maximal mount count reached, running e2fsck is recommended <6>[ 3.512756] EXT4-fs (dm-10): mounted filesystem with ordered data mode. Opts: (null) <4>[ 3.598602] EXT4-fs (dm-10): warning: maximal mount count reached, running e2fsck is recommended <6>[ 3.604614] EXT4-fs (dm-10): mounted filesystem with ordered data mode. Opts: (null) <4>[ 4.219421] usb_chg_detect: using detected chg_type w/ maxpower=2000 <6>[ 4.220336] msm_otg_resume: usb exited from low power mode <6>[ 4.410247] msm_otg_suspend: usb in low power mode <6>[ 6.499481] msmsdcc_runtime_suspend: Enter WIFI suspend <6>[ 7.160705] EXT4-fs (dm-8): mounted filesystem with ordered data mode. Opts: (null) <6>[ 9.929382] [set_pmic_backlight] backlight enabled <6>[ 16.870788] EXT4-fs (dm-9): mounted filesystem with ordered data mode. Opts: (null) <6>[ 17.017272] EXT3-fs: barriers not enabled <6>[ 17.017913] kjournald starting. Commit interval 5 seconds <4>[ 17.018035] EXT3-fs (mmcblk0p13): warning: maximal mount count reached, running e2fsck is recommended <6>[ 17.020690] EXT3-fs (mmcblk0p13): using internal journal <6>[ 17.020751] EXT3-fs (mmcblk0p13): mounted filesystem with writeback data mode <6>[ 17.995635] EXT4-fs (dm-8): mounted filesystem with ordered data mode. Opts: (null) <6>[ 40.489746] EXT4-fs (dm-8): mounted filesystem with ordered data mode. Opts: <6>[ 61.180725] a6_update_connected_ps: ac=1 usb=0 dock=0 <6>[ 74.020904] EXT3-fs: barriers not enabled <6>[ 74.031707] kjournald starting. Commit interval 5 seconds <4>[ 74.031829] EXT3-fs (mmcblk0p13): warning: maximal mount count reached, running e2fsck is recommended <6>[ 74.040496] EXT3-fs (mmcblk0p13): using internal journal <6>[ 74.040588] EXT3-fs (mmcblk0p13): mounted filesystem with writeback data mode <6>[ 89.410766] EXT4-fs (dm-8): mounted filesystem with ordered data mode. Opts: (null) <6>[ 124.032104] EXT3-fs: barriers not enabled <6>[ 124.033020] kjournald starting. Commit interval 5 seconds <4>[ 124.033142] EXT3-fs (mmcblk0p13): warning: maximal mount count reached, running e2fsck is recommended <6>[ 124.040679] EXT3-fs (mmcblk0p13): using internal journal <6>[ 124.040771] EXT3-fs (mmcblk0p13): mounted filesystem with writeback data mode <6>[ 124.701171] EXT4-fs (dm-8): mounted filesystem with ordered data mode. Opts: (null) <6>[ 126.591247] EXT4-fs (dm-8): mounted filesystem with ordered data mode. Opts: (null) <4>[ 127.111999] Disabling non-boot CPUs ... <0>[ 127.112121] Restarting system. <4>[ 127.112243] <0>[ 127.112304] Restarting Linux version 3.0.101-cyanogenmod-gee9eb08 (flintman@mx.thenoblealliance.com) (gcc version 4.7 (GCC) ) #2 SMP PREEMPT Fri Apr 25 06:21:30 EDT 2014 <0>[ 127.112670] <3>[ 127.113494] set_dload_mode <0> ( 80167248 ) <3>[ 127.113769] set_dload_mode <0> ( 80167250 ) <5>[ 127.114013] Going down for restart now <3>[ 127.114227] pm8xxx_reset_pwr_off, [1] <3>[ 127.114440] pm8xxx_reset_pwr_off, [2] <3>[ 127.114654] pm8xxx_reset_pwr_off, [3] <3>[ 127.114929] pm8xxx_reset_pwr_off, [4] <3>[ 127.115142] pm8xxx_reset_pwr_off, [5] <3>[ 127.123382] pm8xxx_reset_pwr_off, [6] <3>[ 127.123626] pm8xxx_reset_pwr_off, [7] <3>[ 127.123840] pm8xxx_reset_pwr_off, [8] <6>[ 127.124053] arch_reset: Initiating reboot via bootloader Broadcasting: Intent { act=com.evervolv.toolbox.action.DUMPLOGCAT_FINISHED (has extras) } *** /system/bin/am: Timed out after 5.0s (killing pid 9860)