------ KERNEL LOG (dmesg) ------
[<c006dc68>] (warn_slowpath_fmt+0x38/0x40)
<4>[    7.602020]  r9:00000000 r8:00000000 r7:00000000 r6:0000001b r5:c05ab6f4
<4>[    7.602813] r4:c0639f44
<4>[    7.603210] [<c006dc30>] (warn_slowpath_fmt+0x0/0x40) from [<c02362e4>] (gpio_ensure_requested+0x54/0x198)
<4>[    7.603485]  r3:0000001b r2:c0549710
<4>[    7.603881] [<c0236290>] (gpio_ensure_requested+0x0/0x198) from [<c02365cc>] (gpio_direction_output+0x8c/0x154)
<4>[    7.604156] [<c0236540>] (gpio_direction_output+0x0/0x154) from [<c0055b7c>] (supersonic_rfkill_probe+0x30/0x130)
<4>[    7.604461] [<c0055b4c>] (supersonic_rfkill_probe+0x0/0x130) from [<c0280e00>] (platform_drv_probe+0x20/0x24)
<4>[    7.604705]  r6:c05af0f0 r5:c05ac958 r4:c05ac958
<4>[    7.605255] [<c0280de0>] (platform_drv_probe+0x0/0x24) from [<c027fa80>] (driver_probe_device+0xb0/0x160)
<4>[    7.605529] [<c027f9d0>] (driver_probe_device+0x0/0x160) from [<c027fb98>] (__driver_attach+0x68/0x8c)
<4>[    7.605804]  r7:00000000 r6:c05af0f0 r5:c05ac98c r4:c05ac958
<4>[    7.606475] [<c027fb30>] (__driver_attach+0x0/0x8c) from [<c027f214>] (bus_for_each_dev+0x54/0x94)
<4>[    7.606719]  r7:00000000 r6:c027fb30 r5:db82bee8 r4:c05af0f0
<4>[    7.607513] [<c027f1c0>] (bus_for_each_dev+0x0/0x94) from [<c027f8c4>] (driver_attach+0x20/0x28)
<4>[    7.607666]  r7:00000000 r6:c05c6e58 r5:db9d1bc0 r4:c05af0f0
<4>[    7.608459] [<c027f8a4>] (driver_attach+0x0/0x28) from [<c027eaf8>] (bus_add_driver+0xac/0x220)
<4>[    7.608734] [<c027ea4c>] (bus_add_driver+0x0/0x220) from [<c02801f0>] (driver_register+0xb0/0x140)
<4>[    7.608886] [<c0280140>] (driver_register+0x0/0x140) from [<c0281254>] (platform_driver_register+0x4c/0x60)
<4>[    7.609130]  r9:00000000 r8:00000000 r7:00000000 r6:c0071994 r5:c000f694
<4>[    7.609924] r4:c002a518
<4>[    7.610321] [<c0281208>] (platform_driver_register+0x0/0x60) from [<c000f6cc>] (supersonic_rfkill_init+0x38/0x48)
<4>[    7.610595] [<c000f694>] (supersonic_rfkill_init+0x0/0x48) from [<c002f3c4>] (do_one_initcall+0xd8/0x1ac)
<4>[    7.610870] [<c002f2ec>] (do_one_initcall+0x0/0x1ac) from [<c0008448>] (kernel_init+0xa0/0x150)
<4>[    7.611145] [<c00083a8>] (kernel_init+0x0/0x150) from [<c0071994>] (do_exit+0x0/0x72c)
<4>[    7.611267]  r5:c00083a8 r4:00000000
<4>[    7.611816] ---[ end trace dec6997083161631 ]---
<4>[    7.625152] ------------[ cut here ]------------
<4>[    7.625427] WARNING: at ../../../../../../kernel/htc/qsd8k/drivers/gpio/gpiolib.c:99 gpio_ensure_requested+0x54/0x198()
<4>[    7.625579] autorequest GPIO-146
<4>[    7.625823] Modules linked in:
<4>[    7.626098] Backtrace: 
<4>[    7.626373] [<c0038bcc>] (dump_backtrace+0x0/0x110) from [<c0460cf4>] (dump_stack+0x18/0x1c)
<4>[    7.626647]  r7:00000009 r6:00000063 r5:c02362e4 r4:db82be00
<4>[    7.627349] [<c0460cdc>] (dump_stack+0x0/0x1c) from [<c006dbac>] (warn_slowpath_common+0x54/0x6c)
<4>[    7.627624] [<c006db58>] (warn_slowpath_common+0x0/0x6c) from [<c006dc68>] (warn_slowpath_fmt+0x38/0x40)
<4>[    7.627868]  r9:00000000 r8:00000001 r7:00000000 r6:00000092 r5:c05ab924
<4>[    7.628662] r4:c063a4d8
<4>[    7.629089] [<c006dc30>] (warn_slowpath_fmt+0x0/0x40) from [<c02362e4>] (gpio_ensure_requested+0x54/0x198)
<4>[    7.629333]  r3:00000092 r2:c0549710
<4>[    7.629760] [<c0236290>] (gpio_ensure_requested+0x0/0x198) from [<c02365cc>] (gpio_direction_output+0x8c/0x154)
<4>[    7.630035] [<c0236540>] (gpio_direction_output+0x0/0x154) from [<c0055b9c>] (supersonic_rfkill_probe+0x50/0x130)
<4>[    7.630310] [<c0055b4c>] (supersonic_rfkill_probe+0x0/0x130) from [<c0280e00>] (platform_drv_probe+0x20/0x24)
<4>[    7.630584]  r6:c05af0f0 r5:c05ac958 r4:c05ac958
<4>[    7.631103] [<c0280de0>] (platform_drv_probe+0x0/0x24) from [<c027fa80>] (driver_probe_device+0xb0/0x160)
<4>[    7.631378] [<c027f9d0>] (driver_probe_device+0x0/0x160) from [<c027fb98>] (__driver_attach+0x68/0x8c)
<4>[    7.631652]  r7:00000000 r6:c05af0f0 r5:c05ac98c r4:c05ac958
<4>[    7.632324] [<c027fb30>] (__driver_attach+0x0/0x8c) from [<c027f214>] (bus_for_each_dev+0x54/0x94)
<4>[    7.632568]  r7:00000000 r6:c027fb30 r5:db82bee8 r4:c05af0f0
<4>[    7.633361] [<c027f1c0>] (bus_for_each_dev+0x0/0x94) from [<c027f8c4>] (driver_attach+0x20/0x28)
<4>[    7.633514]  r7:00000000 r6:c05c6e58 r5:db9d1bc0 r4:c05af0f0
<4>[    7.634307] [<c027f8a4>] (driver_attach+0x0/0x28) from [<c027eaf8>] (bus_add_driver+0xac/0x220)
<4>[    7.634582] [<c027ea4c>] (bus_add_driver+0x0/0x220) from [<c02801f0>] (driver_register+0xb0/0x140)
<4>[    7.634857] [<c0280140>] (driver_register+0x0/0x140) from [<c0281254>] (platform_driver_register+0x4c/0x60)
<4>[    7.635009]  r9:00000000 r8:00000000 r7:00000000 r6:c0071994 r5:c000f694
<4>[    7.635803] r4:c002a518
<4>[    7.636230] [<c0281208>] (platform_driver_register+0x0/0x60) from [<c000f6cc>] (supersonic_rfkill_init+0x38/0x48)
<4>[    7.636505] [<c000f694>] (supersonic_rfkill_init+0x0/0x48) from [<c002f3c4>] (do_one_initcall+0xd8/0x1ac)
<4>[    7.636779] [<c002f2ec>] (do_one_initcall+0x0/0x1ac) from [<c0008448>] (kernel_init+0xa0/0x150)
<4>[    7.637054] [<c00083a8>] (kernel_init+0x0/0x150) from [<c0071994>] (do_exit+0x0/0x72c)
<4>[    7.637176]  r5:c00083a8 r4:00000000
<4>[    7.637695] ---[ end trace dec6997083161632 ]---
<4>[    7.652862] ------------[ cut here ]------------
<4>[    7.653106] WARNING: at ../../../../../../kernel/htc/qsd8k/drivers/gpio/gpiolib.c:99 gpio_ensure_requested+0x54/0x198()
<4>[    7.653381] autorequest GPIO-43
<4>[    7.653533] Modules linked in:
<4>[    7.653778] Backtrace: 
<4>[    7.654052] [<c0038bcc>] (dump_backtrace+0x0/0x110) from [<c0460cf4>] (dump_stack+0x18/0x1c)
<4>[    7.654327]  r7:00000009 r6:00000063 r5:c02362e4 r4:db82be00
<4>[    7.655120] [<c0460cdc>] (dump_stack+0x0/0x1c) from [<c006dbac>] (warn_slowpath_common+0x54/0x6c)
<4>[    7.655303] [<c006db58>] (warn_slowpath_common+0x0/0x6c) from [<c006dc68>] (warn_slowpath_fmt+0x38/0x40)
<4>[    7.655548]  r9:00000000 r8:00000000 r7:00000000 r6:0000002b r5:c05ab764
<4>[    7.656341] r4:c063a004
<4>[    7.656738] [<c006dc30>] (warn_slowpath_fmt+0x0/0x40) from [<c02362e4>] (gpio_ensure_requested+0x54/0x198)
<4>[    7.657012]  r3:0000002b r2:c0549710
<4>[    7.657409] [<c0236290>] (gpio_ensure_requested+0x0/0x198) from [<c02365cc>] (gpio_direction_output+0x8c/0x154)
<4>[    7.657714] [<c0236540>] (gpio_direction_output+0x0/0x154) from [<c0055bec>] (supersonic_rfkill_probe+0xa0/0x130)
<4>[    7.657989] [<c0055b4c>] (supersonic_rfkill_probe+0x0/0x130) from [<c0280e00>] (platform_drv_probe+0x20/0x24)
<4>[    7.658233]  r6:c05af0f0 r5:c05ac958 r4:c05ac958
<4>[    7.658782] [<c0280de0>] (platform_drv_probe+0x0/0x24) from [<c027fa80>] (driver_probe_device+0xb0/0x160)
<4>[    7.659057] [<c027f9d0>] (driver_probe_device+0x0/0x160) from [<c027fb98>] (__driver_attach+0x68/0x8c)
<4>[    7.659332]  r7:00000000 r6:c05af0f0 r5:c05ac98c r4:c05ac958
<4>[    7.660003] [<c027fb30>] (__driver_attach+0x0/0x8c) from [<c027f214>] (bus_for_each_dev+0x54/0x94)
<4>[    7.660278]  r7:00000000 r6:c027fb30 r5:db82bee8 r4:c05af0f0
<4>[    7.661071] [<c027f1c0>] (bus_for_each_dev+0x0/0x94) from [<c027f8c4>] (driver_attach+0x20/0x28)
<4>[    7.661193]  r7:00000000 r6:c05c6e58 r5:db9d1bc0 r4:c05af0f0
<4>[    7.661895] [<c027f8a4>] (driver_attach+0x0/0x28) from [<c027eaf8>] (bus_add_driver+0xac/0x220)
<4>[    7.662170] [<c027ea4c>] (bus_add_driver+0x0/0x220) from [<c02801f0>] (driver_register+0xb0/0x140)
<4>[    7.662445] [<c0280140>] (driver_register+0x0/0x140) from [<c0281254>] (platform_driver_register+0x4c/0x60)
<4>[    7.662567]  r9:00000000 r8:00000000 r7:00000000 r6:c0071994 r5:c000f694
<4>[    7.663360] r4:c002a518
<4>[    7.663787] [<c0281208>] (platform_driver_register+0x0/0x60) from [<c000f6cc>] (supersonic_rfkill_init+0x38/0x48)
<4>[    7.664062] [<c000f694>] (supersonic_rfkill_init+0x0/0x48) from [<c002f3c4>] (do_one_initcall+0xd8/0x1ac)
<4>[    7.664337] [<c002f2ec>] (do_one_initcall+0x0/0x1ac) from [<c0008448>] (kernel_init+0xa0/0x150)
<4>[    7.664581] [<c00083a8>] (kernel_init+0x0/0x150) from [<c0071994>] (do_exit+0x0/0x72c)
<4>[    7.664733]  r5:c00083a8 r4:00000000
<4>[    7.665252] ---[ end trace dec6997083161633 ]---
<4>[    7.665405] ------------[ cut here ]------------
<4>[    7.665679] WARNING: at ../../../../../../kernel/htc/qsd8k/drivers/gpio/gpiolib.c:99 gpio_ensure_requested+0x54/0x198()
<4>[    7.665954] autorequest GPIO-46
<4>[    7.666076] Modules linked in:
<4>[    7.666351] Backtrace: 
<4>[    7.666625] [<c0038bcc>] (dump_backtrace+0x0/0x110) from [<c0460cf4>] (dump_stack+0x18/0x1c)
<4>[    7.666870]  r7:00000009 r6:00000063 r5:c02362e4 r4:db82be00
<4>[    7.667663] [<c0460cdc>] (dump_stack+0x0/0x1c) from [<c006dbac>] (warn_slowpath_common+0x54/0x6c)
<4>[    7.667846] [<c006db58>] (warn_slowpath_common+0x0/0x6c) from [<c006dc68>] (warn_slowpath_fmt+0x38/0x40)
<4>[    7.668090]  r9:00000000 r8:00000000 r7:00000000 r6:0000002e r5:c05ab764
<4>[    7.668884] r4:c063a028
<4>[    7.669281] [<c006dc30>] (warn_slowpath_fmt+0x0/0x40) from [<c02362e4>] (gpio_ensure_requested+0x54/0x198)
<4>[    7.669555]  r3:0000002e r2:c0549710
<4>[    7.669952] [<c0236290>] (gpio_ensure_requested+0x0/0x198) from [<c02365cc>] (gpio_direction_output+0x8c/0x154)
<4>[    7.670227] [<c0236540>] (gpio_direction_output+0x0/0x154) from [<c0055bf8>] (supersonic_rfkill_probe+0xac/0x130)
<4>[    7.670501] [<c0055b4c>] (supersonic_rfkill_probe+0x0/0x130) from [<c0280e00>] (platform_drv_probe+0x20/0x24)
<4>[    7.670776]  r6:c05af0f0 r5:c05ac958 r4:c05ac958
<4>[    7.671325] [<c0280de0>] (platform_drv_probe+0x0/0x24) from [<c027fa80>] (driver_probe_device+0xb0/0x160)
<4>[    7.671600] [<c027f9d0>] (driver_probe_device+0x0/0x160) from [<c027fb98>] (__driver_attach+0x68/0x8c)
<4>[    7.671875]  r7:00000000 r6:c05af0f0 r5:c05ac98c r4:c05ac958
<4>[    7.672546] [<c027fb30>] (__driver_attach+0x0/0x8c) from [<c027f214>] (bus_for_each_dev+0x54/0x94)
<4>[    7.672790]  r7:00000000 r6:c027fb30 r5:db82bee8 r4:c05af0f0
<4>[    7.673583] [<c027f1c0>] (bus_for_each_dev+0x0/0x94) from [<c027f8c4>] (driver_attach+0x20/0x28)
<4>[    7.673858]  r7:00000000 r6:c05c6e58 r5:db9d1bc0 r4:c05af0f0
<4>[    7.674530] [<c027f8a4>] (driver_attach+0x0/0x28) from [<c027eaf8>] (bus_add_driver+0xac/0x220)
<4>[    7.674804] [<c027ea4c>] (bus_add_driver+0x0/0x220) from [<c02801f0>] (driver_register+0xb0/0x140)
<4>[    7.675079] [<c0280140>] (driver_register+0x0/0x140) from [<c0281254>] (platform_driver_register+0x4c/0x60)
<4>[    7.675231]  r9:00000000 r8:00000000 r7:00000000 r6:c0071994 r5:c000f694
<4>[    7.676025] r4:c002a518
<4>[    7.676422] [<c0281208>] (platform_driver_register+0x0/0x60) from [<c000f6cc>] (supersonic_rfkill_init+0x38/0x48)
<4>[    7.676696] [<c000f694>] (supersonic_rfkill_init+0x0/0x48) from [<c002f3c4>] (do_one_initcall+0xd8/0x1ac)
<4>[    7.676971] [<c002f2ec>] (do_one_initcall+0x0/0x1ac) from [<c0008448>] (kernel_init+0xa0/0x150)
<4>[    7.677246] [<c00083a8>] (kernel_init+0x0/0x150) from [<c0071994>] (do_exit+0x0/0x72c)
<4>[    7.677490]  r5:c00083a8 r4:00000000
<4>[    7.677886] ---[ end trace dec6997083161634 ]---
<4>[    7.678070] ------------[ cut here ]------------
<4>[    7.678314] WARNING: at ../../../../../../kernel/htc/qsd8k/drivers/gpio/gpiolib.c:99 gpio_ensure_requested+0x54/0x198()
<4>[    7.678588] autorequest GPIO-87
<4>[    7.678741] Modules linked in:
<4>[    7.678985] Backtrace: 
<4>[    7.679290] [<c0038bcc>] (dump_backtrace+0x0/0x110) from [<c0460cf4>] (dump_stack+0x18/0x1c)
<4>[    7.679534]  r7:00000009 r6:00000063 r5:c02362e4 r4:db82be00
<4>[    7.680328] [<c0460cdc>] (dump_stack+0x0/0x1c) from [<c006dbac>] (warn_slowpath_common+0x54/0x6c)
<4>[    7.680480] [<c006db58>] (warn_slowpath_common+0x0/0x6c) from [<c006dc68>] (warn_slowpath_fmt+0x38/0x40)
<4>[    7.680755]  r9:00000000 r8:00000000 r7:00000000 r6:00000057 r5:c05ab7d4
<4>[    7.681518] r4:c063a214
<4>[    7.681945] [<c006dc30>] (warn_slowpath_fmt+0x0/0x40) from [<c02362e4>] (gpio_ensure_requested+0x54/0x198)
<4>[    7.682220]  r3:00000057 r2:c0549710
<4>[    7.682617] [<c0236290>] (gpio_ensure_requested+0x0/0x198) from [<c02365cc>] (gpio_direction_output+0x8c/0x154)
<4>[    7.682922] [<c0236540>] (gpio_direction_output+0x0/0x154) from [<c0055c04>] (supersonic_rfkill_probe+0xb8/0x130)
<4>[    7.683197] [<c0055b4c>] (supersonic_rfkill_probe+0x0/0x130) from [<c0280e00>] (platform_drv_probe+0x20/0x24)
<4>[    7.683441]  r6:c05af0f0 r5:c05ac958 r4:c05ac958
<4>[    7.683990] [<c0280de0>] (platform_drv_probe+0x0/0x24) from [<c027fa80>] (driver_probe_device+0xb0/0x160)
<4>[    7.684265] [<c027f9d0>] (driver_probe_device+0x0/0x160) from [<c027fb98>] (__driver_attach+0x68/0x8c)
<4>[    7.684539]  r7:00000000 r6:c05af0f0 r5:c05ac98c r4:c05ac958
<4>[    7.685241] [<c027fb30>] (__driver_attach+0x0/0x8c) from [<c027f214>] (bus_for_each_dev+0x54/0x94)
<4>[    7.685394]  r7:00000000 r6:c027fb30 r5:db82bee8 r4:c05af0f0
<4>[    7.686187] [<c027f1c0>] (bus_for_each_dev+0x0/0x94) from [<c027f8c4>] (driver_attach+0x20/0x28)
<4>[    7.686431]  r7:00000000 r6:c05c6e58 r5:db9d1bc0 r4:c05af0f0
<4>[    7.687103] [<c027f8a4>] (driver_attach+0x0/0x28) from [<c027eaf8>] (bus_add_driver+0xac/0x220)
<4>[    7.687408] [<c027ea4c>] (bus_add_driver+0x0/0x220) from [<c02801f0>] (driver_register+0xb0/0x140)
<4>[    7.687683] [<c0280140>] (driver_register+0x0/0x140) from [<c0281254>] (platform_driver_register+0x4c/0x60)
<4>[    7.687927]  r9:00000000 r8:00000000 r7:00000000 r6:c0071994 r5:c000f694
<4>[    7.688598] r4:c002a518
<4>[    7.689025] [<c0281208>] (platform_driver_register+0x0/0x60) from [<c000f6cc>] (supersonic_rfkill_init+0x38/0x48)
<4>[    7.689270] [<c000f694>] (supersonic_rfkill_init+0x0/0x48) from [<c002f3c4>] (do_one_initcall+0xd8/0x1ac)
<4>[    7.689544] [<c002f2ec>] (do_one_initcall+0x0/0x1ac) from [<c0008448>] (kernel_init+0xa0/0x150)
<4>[    7.689819] [<c00083a8>] (kernel_init+0x0/0x150) from [<c0071994>] (do_exit+0x0/0x72c)
<4>[    7.690093]  r5:c00083a8 r4:00000000
<4>[    7.690490] ---[ end trace dec6997083161635 ]---
<6>[    7.690673] -- RK OFF --
<6>[    7.696289] tpa2018d1_init
<4>[    7.696655] i2c-core: driver [tpa2018d1] using legacy suspend method
<4>[    7.696807] i2c-core: driver [tpa2018d1] using legacy resume method
<3>[    7.697082] tpa6130 HP AMP: init
<6>[    7.697540] [HS_MGR] (headset_notifier_register) Register MIC_BIAS notifier
<7>[    7.697906] flashlight: enable flash_adj function
<7>[    7.698181] Registered led device: flashlight
<6>[    7.698455] flashlight_probe: The Flashlight Driver is ready
<6>[    7.698699] batt: init over voltage interrupt detection. at 4764476082 (1970-01-01 00:00:04.764171119 UTC)
<6>[    7.738464] batt: A2M_RPC: get_batt_info: batt_id=2, batt_vol=3822, batt_temp=350, batt_current=0, level=66, charging_source=0, charging_enabled=0, full_bat=1500000, over_vchg=0 at 4804182336 (1970-01-01 00:00:04.803877353 UTC)
<6>[    7.739990] [HS_MGR] (htc_35mm_probe) ++++++++++++++++++++
<6>[    7.740692] input: h2w headset as /devices/virtual/input/input0
<6>[    7.741180] [HS_MGR] (htc_35mm_probe) --------------------
<6>[    7.741424] [HS_GPIO] (audiojack_probe) ++++++++++++++++++++
<6>[    7.741760] [HS_GPIO] (audiojack_probe) --------------------
<6>[    7.755279] atmega-microp 0-0066: microp version [04][1F]
<6>[    7.756225] capella_cm3602_probe: probe
<6>[    7.756591] input: proximity as /devices/virtual/input/input1
<6>[    7.757446] [HS_MICROP] (htc_headset_microp_probe) ++++++++++++++++++++
<6>[    7.795471] [HS_MGR] (headset_notifier_register) Register REMOTE_ADC notifier
<6>[    7.795745] [HS_MGR] (headset_notifier_register) Register MIC_STATUS notifier
<6>[    7.795898] [HS_MGR] (headset_notifier_register) Register KEY_INT_ENABLE notifier
<6>[    7.796142] [HS_MICROP] (htc_headset_microp_probe) --------------------
<3>[    7.796417] microp_function_check: No function 2 !!
<4>[    7.835540] i2c-core: driver [atmega-microp] using legacy suspend method
<4>[    7.835784] i2c-core: driver [atmega-microp] using legacy resume method
<6>[    7.845306] ashmem: initialized
<6>[    7.846496] fuse init (API version 7.16)
<7>[    7.846832] yaffs: yaffs built Apr 22 2014 13:13:36 Installing.
<6>[    7.848388] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
<6>[    7.848785] io scheduler noop registered
<6>[    7.848968] io scheduler bfq registered (default)
<6>[    7.849487] mddi: init() base=0xdc814000 irq=16
<7>[    7.850067] mddi runs at 384000000
<6>[    7.851379] mddi cmd send rtd: int 2a000, stat 8023, rtd val 6
<6>[    7.853668] mddi: registering panel mddi_c_b9f6_5582
<6>[    7.853820] mddi: publish: 
<7>[    7.854583] mddi_novtec_probe
<6>[    7.854858] CABC enabled
<7>[    7.855651] Registered led device: lcd-backlight
<6>[    7.856018] vsync on gpio 98 now 1
<6>[    7.856567] msmfb_probe() installing 480 x 800 panel
<4>[    7.857299] [hdmi]suc_hdmi_gpio_on
<4>[    7.857879] [hdmi]hdmi_power(1)
<4>[    7.915985] [hdmi/tx]hdmi_disable_int
<4>[    7.917053] [hdmi/tpi]tpi_prepare
<4>[    7.917236] [hdmi/tx]hdmi_enable_int
<6>[    7.918426] SiL902x-hdmi 0-003b: hdmi is on line with irq Enabled
<4>[    7.918884] [hdmi/tx]hdmi_irq_handler
<7>[    7.919311] hdmi_lcdc_probe
<7>[    7.919799] pclk = 74250000, pad_pclk = 74250000
<4>[    7.919952] solomon: polarity=0000
<6>[    7.920410] hdmi_lcdc_probe: initialized
<7>[    7.920684] hdmifb_probe
<7>[    7.930572] HDMI FB: 0x2b00000 0x2efffff
<6>[    7.930969] hdmi_fb 1280 * 720 initialed
<4>[    7.931121] [hdmi/lcdc]lcdc_disable_video: disable clocks
<4>[    7.931243] [hdmi/tx]hdmi_panel_blank
<4>[    7.931549] [hdmi/lcdc]lcdc_disable_video, blank_count=0
<7>[    7.931732] msm_hdmi hdmi0: hdmifb_add_hdmi_device
<6>[    7.932495] msm_serial: detected port #0
<6>[    7.932678] uartclk = 19200000
<6>[    7.932830] msm_serial.0: ttyMSM0 at MMIO 0xa9a00000 (irq = 64) is a MSM
<6>[    7.933135] msm_serial: console setup on port #0
<4>[   10.166625] [hdmi]hdmi_power(3)
<6>[   10.169616] console [ttyMSM0] enabled
<6>[   10.173645] msm_serial: driver initialized
<6>[   10.177764] msm_serial_hs.0: ttyHS0 at MMIO 0xa0200000 (irq = 44) is a MSM HS UART
<6>[   10.185333] msm_serial_hs module loaded
<6>[   10.189941] kgsl kgsl-3d0: |kgsl_gpummu_init| MMU type set for device is GPUMMU
<6>[   10.200408] loop: module loaded
<6>[   10.200714] pmem: Initializing pmem_adsp (user-space) as cached
<6>[   10.205535] pmem: Initializing pmem_venc (user-space) as cached
<6>[   10.211303] AKM8973 compass driver: init
<6>[   10.216156] input: compass as /devices/virtual/input/input2
<6>[   10.220825] a1026_init
<4>[   10.222778] i2c-core: driver [audience_a1026] using legacy suspend method
<4>[   10.229705] i2c-core: driver [audience_a1026] using legacy resume method
<6>[   10.236297] spi_bma150_probe: G-sensor connect with microP: start initial
<4>[   10.265716] [hdmi/tx]hdmi_wakeup
<4>[   10.372619] [hdmi/tpi]tpi_start, ID=9024
<4>[   10.372924] [hdmi/hdcp]hdcp_init: 
<4>[   10.373657] [hdmi/hdcp]hdcp_check_support: ret=1
<6>[   10.376495] __spi_bma150_set_mode: BMA get into SLEEP mode!
<6>[   10.376922] [TPS65200]: Driver registration done
<6>[   10.377746] msm_nand: allocated dma buffer at ff005000, dma_addr 3ba99000
<6>[   10.378173] msm_nand: read CFG0 = aa5401c0 CFG1 = 6644a
<6>[   10.378387] msm_nand: CFG0 cw/page=7 ud_sz=512 ecc_sz=10 spare_sz=4
<6>[   10.378814] msm_nand: NAND_READ_ID = 6601b3ec
<6>[   10.379150] msn_nand: nandid 6601b3ec status c07120
<6>[   10.379455] msm_nand: manuf Samsung (0xec) device 0xb3 blocksz 40000 pagesz 1000 size 40000000
<6>[   10.386413] msm_nand: save CFG0 = e85409c0 CFG1 = 4645e
<6>[   10.391632] msm_nand: CFG0: cw/page=7 ud_sz=516 ecc_sz=10 spare_sz=0 num_addr_cycles=5
<6>[   10.399627] msm_nand: DEV_CMD1: f00f3000
<4>[   10.403442] [hdmi/hdcp]hdcp_check_aksv:  askv={cb, ca, 13, b9, 26}
<6>[   10.409484] msm_nand: NAND_EBI2_ECC_BUF_CFG: 1ff
<5>[   10.414215] Creating 7 MTD partitions on "msm_nand":
<4>[   10.419036] [hdmi/hdcp]hdcp_check_aksv: :ret=true
<4>[   10.423828] [hdmi/hdcp]hdcp_off: 
<5>[   10.427093] 0x00003f300000-0x00003ff00000 : "wimax"
<4>[   10.449371] [hdmi/tpi]tpi_cable_disconn, into_d3=1
<5>[   10.450256] 0x00003ff00000-0x000040000000 : "misc"
<5>[   10.452056] 0x000004340000-0x0000047c0000 : "recovery"
<5>[   10.456268] 0x0000047c0000-0x000004b00000 : "boot"
<5>[   10.459564] 0x000004b00000-0x00001a900000 : "system"
<5>[   10.686462] 0x00001a900000-0x000024900000 : "cache"
<5>[   10.790496] 0x000024900000-0x00003f300000 : "userdata"
<6>[   11.066101] PPP generic driver version 2.4.2
<6>[   11.066680] PPP Deflate Compression module registered
<6>[   11.066864] PPP BSD Compression module registered
<6>[   11.067993] PPP MPPE Compression module registered
<6>[   11.068206] NET: Registered protocol family 24
<6>[   11.068878] tun: Universal TUN/TAP device driver, 1.6
<6>[   11.069091] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
<6>[   11.070709] msm72k_udc: msm72k_probe
<6>[   11.071014] usb: accessory detect 1
<6>[   11.071197] usb: id_pin_gpio 37
<6>[   11.071350] usb: dock detect 0
<6>[   11.071655] usb: dock pin gpio 0
<6>[   11.072540] msm72k_udc: msm72k_probe() io=dc820000, irq=58, dma=ff006000(3bb94000)
<6>[   11.080871] android init
<6>[   11.082641] android_probe pdata: c05abaa8
<6>[   11.086822] android_bind
<7>[   11.089080] android_bind_config
<6>[   11.092529] android_usb gadget: android_usb ready
<6>[   11.096954] msm72k_udc: msm72k_udc: registered gadget driver 'android_usb'
<6>[   11.103881] supersonic_uart_usb_switch:uart:1
<6>[   11.108093] supersonic_uart_usb_switch:Non wimax UART
<6>[   11.113311] hsusb: IDLE -> ONLINE
<6>[   11.116485] usb: lpm exit
<6>[   11.119140] hsusb: reset controller
<6>[   11.122619] f_adb init
<6>[   11.125000] android_register_function adb
<6>[   11.128875] f_mass_storage init
<6>[   11.132019] fsg_probe pdev: c05aca28, pdata: c05ad854
<6>[   11.137237] android_register_function usb_mass_storage
<6>[   11.142120] f_rndis init
<6>[   11.144744] android_register_function rndis
<6>[   11.148956] f_accessory init
<6>[   11.151672] android_register_function accessory
<6>[   11.156219] msm_hsusb_phy_reset
<6>[   11.159484] diag init
<6>[   11.161560] android_register_function diag
<6>[   11.165710] rndis_function_bind_config MAC: 02:39:2F:01:01:7B
<4>[   11.171569] android_usb gadget: using random self ethernet address
<4>[   11.177642] android_usb gadget: using random host ethernet address
<6>[   11.184295] usb0: MAC 4e:0c:f6:2c:9a:e7
<6>[   11.187561] usb0: HOST MAC 2a:20:0f:bb:db:29
<6>[   11.192108] android_usb gadget: Mass Storage Function, version: 2009/09/11
<6>[   11.198822] android_usb gadget: Number of LUNs=1
<6>[   11.203247]  lun0: LUN: removable file: (no medium)
<6>[   11.208374] adb_bind_config
<6>[   11.211303] diag_bind_config
<6>[   11.214050] acc_bind_config
<6>[   11.217346] atmel_ts_init():
<6>[   11.219543] supersonic_atmel_ts_power(1)
<6>[   11.326446] Touch: 0x01 0x90 0xEA 0xD8 0x09 0x00 0x00
<6>[   11.327667] Touch: 0x01 0x00 0xEA 0xD8 0x09 0x00 0x00
<6>[   11.345489] Touch: No more message
<6>[   11.347900] info block: 0x80 0x01 0x16 0xAB 0x12 0x0C 0x11
<6>[   11.348236] 5 point multitouch enabled
<6>[   11.350463] Type: 05, Start: 00F2, Size:  9, Instance:  0, RD#:  0,  0
<6>[   11.352874] Type: 06, Start: 00FB, Size:  6, Instance:  0, RD#:  1,  1
<6>[   11.355163] Type: 26, Start: 0101, Size:  8, Instance:  0, RD#:  0,  0
<6>[   11.357574] Type: 07, Start: 0109, Size:  3, Instance:  0, RD#:  0,  0
<6>[   11.359954] Type: 08, Start: 010C, Size:  8, Instance:  0, RD#:  0,  0
<6>[   11.362243] Type: 09, Start: 0114, Size: 1F, Instance:  0, RD#:  A,  2
<6>[   11.364624] Type: 0F, Start: 0133, Size:  B, Instance:  0, RD#:  1,  C
<6>[   11.365509] msm72k_udc: ulpi: write 0x0c to 0x31
<6>[   11.365814] msm72k_udc: ulpi: write 0x30 to 0x32
<6>[   11.368469] msm72k_udc: ulpi: write 0x1d to 0x0d
<6>[   11.373077] msm72k_udc: ulpi: write 0x1d to 0x10
<6>[   11.377838] Type: 12, Start: 013E, Size:  2, Instance:  0, RD#:  0,  0
<6>[   11.384246] usb: notify offline
<6>[   11.387451] msm_hsusb: enable pullup
<6>[   11.390869] accessory_detect_init: id pin 37
<6>[   11.395355] hsusb: ONLINE -> OFFLINE
<6>[   11.398803] usb: notify offline
<6>[   11.401824] msm_hsusb_phy_reset
<6>[   11.404998] Type: 13, Start: 0140, Size: 10, Instance:  0, RD#:  1,  D
<6>[   11.413726] Type: 14, Start: 0150, Size:  C, Instance:  0, RD#:  1,  E
<6>[   11.419158] Type: 16, Start: 015C, Size: 11, Instance:  0, RD#:  1,  F
<6>[   11.426635] Type: 17, Start: 016D, Size:  F, Instance:  0, RD#:  1, 10
<6>[   11.433166] Type: 18, Start: 017C, Size: 13, Instance:  0, RD#:  4, 11
<6>[   11.439575] Type: 19, Start: 018F, Size:  E, Instance:  0, RD#:  1, 15
<6>[   11.446166] Type: 1B, Start: 019D, Size:  7, Instance:  0, RD#:  1, 16
<6>[   11.452575] Type: 1C, Start: 01A4, Size:  6, Instance:  0, RD#:  1, 17
<6>[   11.459228] Type: 25, Start: 0070, Size: 82, Instance:  0, RD#:  0,  0
<6>[   11.463531] finger_type: 2, max finger: 5
<6>[   11.467651] usb: lpm enter
<6>[   11.470214] usb_suspend_phy
<3>[   11.546478] CRC Error: 63, ea
<6>[   11.546752] Touch: Config reload
<6>[   11.698486] Touch: 0x01 0x90 0xEA 0xD8 0x09 0x00 0x00
<6>[   11.805389] input: atmel-touchscreen as /devices/virtual/input/input3
<6>[   11.806121] atmel_qt602240 0-004a: Start touchscreen atmel-touchscreen in interrupt mode
<6>[   11.806793] GPIO Input Driver: Start gpio inputs for supersonic-keypad in interrupt mode
<6>[   11.807312] input: supersonic-keypad as /devices/virtual/input/input4
<6>[   11.807830] Touch Status: 0x01 0x90 0xEA 0xD8 0x09 
<6>[   11.809661] input: lightsensor-level as /devices/virtual/input/input5
<6>[   11.810272] Touch Status: 0x01 0x00 0xEA 0xD8 0x09 
<6>[   11.811431] set_ls_kvalue: ALS calibrated als_kadc=0x6da501b1
<6>[   11.812011] set_ls_kvalue: als_kadc=0x1b1, als_gadc=0x118
<4>[   11.817291] ls_table: data[0] , data[0] = 0, 4
<4>[   11.821807] ls_table: data[1] , data[1] = 0, a
<4>[   11.826141] ls_table: data[2] , data[2] = 0, 12
<6>[   11.830627] gpio_keys_scan_keys: key 1-74, 0 (94) changed to 0
<6>[   11.836578] gpio_keys_scan_keys: key 1-73, 1 (41) changed to 0
<6>[   11.842254] gpio_keys_scan_keys: key 1-72, 2 (42) changed to 0
<4>[   11.848114] ls_table: data[3] , data[3] = 0, 58
<4>[   11.852600] ls_table: data[4] , data[4] = 0, b0
<4>[   11.857269] ls_table: data[5] , data[5] = 1, af
<4>[   11.861633] ls_table: data[6] , data[6] = 2, 35
<4>[   11.866271] ls_table: data[7] , data[7] = 2, bc
<4>[   11.870666] ls_table: data[8] , data[8] = 3, 43
<4>[   11.875183] ls_table: data[9] , data[9] = 3, ff
<7>[   11.897888] __capella_cm3602_power: Turn the capella_cm3602 power on
<6>[   11.898345] using input dev h2w headset for key reset
<6>[   11.898681] using input dev supersonic-keypad for key reset
<6>[   11.900878] using rtc device, msm_rtc, for alarms
<6>[   11.901245] rs30000048:00010000 rs30000048:00010000: rtc core: registered msm_rtc as rtc0
<6>[   11.910034] sctrl.node 0
<6>[   11.912139] ov9665_probe succeeded!
<6>[   11.915527] ov9665 s->node 0
<6>[   11.918304] ov9665: ov9665_sensor_probe switch clk
<6>[   11.923187] SuperSoinc: Doing clk switch (supersonic)(2ndcam)
<6>[   11.936828] ov9665: MCLK enable clk
<3>[   12.037322] msm_i2c msm_i2c.0: error, status 43c8 (30)
<3>[   12.037658] msm_i2c msm_i2c.0: Error during data xfer (-5) @30
<3>[   12.037902] i2c_transfer_retry: try 1/20: i2c_transfer sent: -5, len 1
<3>[   12.055603] msm_i2c msm_i2c.0: error, status 43c8 (30)
<3>[   12.055816] msm_i2c msm_i2c.0: Error during data xfer (-5) @30
<3>[   12.056182] i2c_transfer_retry: try 2/20: i2c_transfer sent: -5, len 1
<3>[   12.075256] msm_i2c msm_i2c.0: error, status 43c8 (30)
<3>[   12.075469] msm_i2c msm_i2c.0: Error during data xfer (-5) @30
<3>[   12.075805] i2c_transfer_retry: try 3/20: i2c_transfer sent: -5, len 1
<3>[   12.095611] msm_i2c msm_i2c.0: error, status 43c8 (30)
<3>[   12.095947] msm_i2c msm_i2c.0: Error during data xfer (-5) @30
<3>[   12.096191] i2c_transfer_retry: try 4/20: i2c_transfer sent: -5, len 1
<3>[   12.115600] msm_i2c msm_i2c.0: error, status 43c8 (30)
<3>[   12.115814] msm_i2c msm_i2c.0: Error during data xfer (-5) @30
<3>[   12.116180] i2c_transfer_retry: try 5/20: i2c_transfer sent: -5, len 1
<3>[   12.135620] msm_i2c msm_i2c.0: error, status 43c8 (30)
<3>[   12.135925] msm_i2c msm_i2c.0: Error during data xfer (-5) @30
<3>[   12.136169] i2c_transfer_retry: try 6/20: i2c_transfer sent: -5, len 1
<3>[   12.155609] msm_i2c msm_i2c.0: error, status 43c8 (30)
<3>[   12.155822] msm_i2c msm_i2c.0: Error during data xfer (-5) @30
<3>[   12.156158] i2c_transfer_retry: try 7/20: i2c_transfer sent: -5, len 1
<3>[   12.175598] msm_i2c msm_i2c.0: error, status 43c8 (30)
<3>[   12.175933] msm_i2c msm_i2c.0: Error during data xfer (-5) @30
<3>[   12.176177] i2c_transfer_retry: try 8/20: i2c_transfer sent: -5, len 1
<3>[   12.195617] msm_i2c msm_i2c.0: error, status 43c8 (30)
<3>[   12.195831] msm_i2c msm_i2c.0: Error during data xfer (-5) @30
<3>[   12.196166] i2c_transfer_retry: try 9/20: i2c_transfer sent: -5, len 1
<3>[   12.215606] msm_i2c msm_i2c.0: error, status 43c8 (30)
<3>[   12.215911] msm_i2c msm_i2c.0: Error during data xfer (-5) @30
<3>[   12.216156] i2c_transfer_retry: try 10/20: i2c_transfer sent: -5, len 1
<3>[   12.235595] msm_i2c msm_i2c.0: error, status 43c8 (30)
<3>[   12.235809] msm_i2c msm_i2c.0: Error during data xfer (-5) @30
<3>[   12.236175] i2c_transfer_retry: try 11/20: i2c_transfer sent: -5, len 1
<3>[   12.255615] msm_i2c msm_i2c.0: error, status 43c8 (30)
<3>[   12.255920] msm_i2c msm_i2c.0: Error during data xfer (-5) @30
<3>[   12.256164] i2c_transfer_retry: try 12/20: i2c_transfer sent: -5, len 1
<3>[   12.275604] msm_i2c msm_i2c.0: error, status 43c8 (30)
<3>[   12.275817] msm_i2c msm_i2c.0: Error during data xfer (-5) @30
<3>[   12.276153] i2c_transfer_retry: try 13/20: i2c_transfer sent: -5, len 1
<3>[   12.295593] msm_i2c msm_i2c.0: error, status 43c8 (30)
<3>[   12.295806] msm_i2c msm_i2c.0: Error during data xfer (-5) @30
<3>[   12.296173] i2c_transfer_retry: try 14/20: i2c_transfer sent: -5, len 1
<3>[   12.315612] msm_i2c msm_i2c.0: error, status 43c8 (30)
<3>[   12.315917] msm_i2c msm_i2c.0: Error during data xfer (-5) @30
<3>[   12.316162] i2c_transfer_retry: try 15/20: i2c_transfer sent: -5, len 1
<3>[   12.335601] msm_i2c msm_i2c.0: error, status 43c8 (30)
<3>[   12.335815] msm_i2c msm_i2c.0: Error during data xfer (-5) @30
<3>[   12.336151] i2c_transfer_retry: try 16/20: i2c_transfer sent: -5, len 1
<3>[   12.355590] msm_i2c msm_i2c.0: error, status 43c8 (30)
<3>[   12.355926] msm_i2c msm_i2c.0: Error during data xfer (-5) @30
<3>[   12.356170] i2c_transfer_retry: try 17/20: i2c_transfer sent: -5, len 1
<3>[   12.375610] msm_i2c msm_i2c.0: error, status 43c8 (30)
<3>[   12.375823] msm_i2c msm_i2c.0: Error during data xfer (-5) @30
<3>[   12.376159] i2c_transfer_retry: try 18/20: i2c_transfer sent: -5, len 1
<3>[   12.395599] msm_i2c msm_i2c.0: error, status 43c8 (30)
<3>[   12.395904] msm_i2c msm_i2c.0: Error during data xfer (-5) @30
<3>[   12.396148] i2c_transfer_retry: try 19/20: i2c_transfer sent: -5, len 1
<3>[   12.415588] msm_i2c msm_i2c.0: error, status 43c8 (30)
<3>[   12.415802] msm_i2c msm_i2c.0: Error during data xfer (-5) @30
<3>[   12.416168] i2c_transfer_retry: try 20/20: i2c_transfer sent: -5, len 1
<6>[   12.435455] ov9665_i2c_txdata failed
<6>[   12.435760] i2c_write failed, addr = 0x3e, val = 0xd0!
<6>[   12.435943] ov9665_sensor_init_probe 
<3>[   12.436401] msm_i2c msm_i2c.0: error, status 43c8 (30)
<3>[   12.436614] msm_i2c msm_i2c.0: Error during data xfer (-5) @30
<3>[   12.436950] i2c_transfer_retry: try 1/20: i2c_transfer sent: -5, len 2
<3>[   12.455596] msm_i2c msm_i2c.0: error, status 43c8 (30)
<3>[   12.455932] msm_i2c msm_i2c.0: Error during data xfer (-5) @30
<3>[   12.456176] i2c_transfer_retry: try 2/20: i2c_transfer sent: -5, len 2
<3>[   12.475585] msm_i2c msm_i2c.0: error, status 43c8 (30)
<3>[   12.475799] msm_i2c msm_i2c.0: Error during data xfer (-5) @30
<3>[   12.476165] i2c_transfer_retry: try 3/20: i2c_transfer sent: -5, len 2
<3>[   12.495605] msm_i2c msm_i2c.0: error, status 43c8 (30)
<3>[   12.495910] msm_i2c msm_i2c.0: Error during data xfer (-5) @30
<3>[   12.496154] i2c_transfer_retry: try 4/20: i2c_transfer sent: -5, len 2
<3>[   12.515594] msm_i2c msm_i2c.0: error, status 43c8 (30)
<3>[   12.515808] msm_i2c msm_i2c.0: Error during data xfer (-5) @30
<3>[   12.516143] i2c_transfer_retry: try 5/20: i2c_transfer sent: -5, len 2
<3>[   12.535552] msm_i2c msm_i2c.0: error, status 43c8 (30)
<3>[   12.535888] msm_i2c msm_i2c.0: Error during data xfer (-5) @30
<3>[   12.536132] i2c_transfer_retry: try 6/20: i2c_transfer sent: -5, len 2
<3>[   12.555603] msm_i2c msm_i2c.0: error, status 43c8 (30)
<3>[   12.555786] msm_i2c msm_i2c.0: Error during data xfer (-5) @30
<3>[   12.556152] i2c_transfer_retry: try 7/20: i2c_transfer sent: -5, len 2
<3>[   12.575592] msm_i2c msm_i2c.0: error, status 43c8 (30)
<3>[   12.575897] msm_i2c msm_i2c.0: Error during data xfer (-5) @30
<3>[   12.576141] i2c_transfer_retry: try 8/20: i2c_transfer sent: -5, len 2
<3>[   12.595611] msm_i2c msm_i2c.0: error, status 43c8 (30)
<3>[   12.595825] msm_i2c msm_i2c.0: Error during data xfer (-5) @30
<3>[   12.596191] i2c_transfer_retry: try 9/20: i2c_transfer sent: -5, len 2
<3>[   12.615600] msm_i2c msm_i2c.0: error, status 43c8 (30)
<3>[   12.615905] msm_i2c msm_i2c.0: Error during data xfer (-5) @30
<3>[   12.616149] i2c_transfer_retry: try 10/20: i2c_transfer sent: -5, len 2
<3>[   12.635589] msm_i2c msm_i2c.0: error, status 43c8 (30)
<3>[   12.635803] msm_i2c msm_i2c.0: Error during data xfer (-5) @30
<3>[   12.636138] i2c_transfer_retry: try 11/20: i2c_transfer sent: -5, len 2
<3>[   12.655609] msm_i2c msm_i2c.0: error, status 43c8 (30)
<3>[   12.655822] msm_i2c msm_i2c.0: Error during data xfer (-5) @30
<3>[   12.656188] i2c_transfer_retry: try 12/20: i2c_transfer sent: -5, len 2
<3>[   12.675598] msm_i2c msm_i2c.0: error, status 43c8 (30)
<3>[   12.675903] msm_i2c msm_i2c.0: Error during data xfer (-5) @30
<3>[   12.676147] i2c_transfer_retry: try 13/20: i2c_transfer sent: -5, len 2
<3>[   12.695587] msm_i2c msm_i2c.0: error, status 43c8 (30)
<3>[   12.695800] msm_i2c msm_i2c.0: Error during data xfer (-5) @30
<3>[   12.696136] i2c_transfer_retry: try 14/20: i2c_transfer sent: -5, len 2
<3>[   12.715606] msm_i2c msm_i2c.0: error, status 43c8 (30)
<3>[   12.715942] msm_i2c msm_i2c.0: Error during data xfer (-5) @30
<3>[   12.716186] i2c_transfer_retry: try 15/20: i2c_transfer sent: -5, len 2
<3>[   12.735595] msm_i2c msm_i2c.0: error, status 43c8 (30)
<3>[   12.735809] msm_i2c msm_i2c.0: Error during data xfer (-5) @30
<3>[   12.736145] i2c_transfer_retry: try 16/20: i2c_transfer sent: -5, len 2
<3>[   12.755584] msm_i2c msm_i2c.0: error, status 43c8 (30)
<3>[   12.755920] msm_i2c msm_i2c.0: Error during data xfer (-5) @30
<3>[   12.756164] i2c_transfer_retry: try 17/20: i2c_transfer sent: -5, len 2
<3>[   12.775604] msm_i2c msm_i2c.0: error, status 43c8 (30)
<3>[   12.775817] msm_i2c msm_i2c.0: Error during data xfer (-5) @30
<3>[   12.776184] i2c_transfer_retry: try 18/20: i2c_transfer sent: -5, len 2
<3>[   12.795593] msm_i2c msm_i2c.0: error, status 43c8 (30)
<3>[   12.795898] msm_i2c msm_i2c.0: Error during data xfer (-5) @30
<3>[   12.796142] i2c_transfer_retry: try 19/20: i2c_transfer sent: -5, len 2
<3>[   12.815582] msm_i2c msm_i2c.0: error, status 43c8 (30)
<3>[   12.815795] msm_i2c msm_i2c.0: Error during data xfer (-5) @30
<3>[   12.816131] i2c_transfer_retry: try 20/20: i2c_transfer sent: -5, len 2
<6>[   12.835449] ov9665_i2c_rxdata failed!
<3>[   12.835632] OV9665 probe faile
<3>[   12.836120] msm_sync_init: failed to initialize ov9665
<4>[   12.836456] msm_camera_ov9665: probe of msm_camera_ov9665.0 failed with error -5
<6>[   12.847167] sctrl.node 0
<6>[   12.847381] s5k6aafx_probe succeeded!
<6>[   12.847595] s5k6aafx s->node 0
<6>[   12.852752] s5k6aafx: s5k6aafx_sensor_probe switch clk
<6>[   12.853057] SuperSoinc: Doing clk switch (supersonic)(2ndcam)
<6>[   12.853271] s5k6aafx: MCLK enable clk
<6>[   12.873687] s5k6aafx_sensor_read_id
<6>[   12.876312] s5k6aafx: model_id = 0x6aa
<6>[   12.881744] s5k6aafx:kobject creat and add
<6>[   12.881958] s5k6aafx:sysfs_create_file
<6>[   12.887298] ../../../../../../kernel/htc/qsd8k/drivers/media/video/msm/s5k6aafx.c s5k6aafx_sensor_probe:980
<4>[   12.888488] [CAM]__ov8810_probe
<6>[   12.888977] sctrl.node 1
<6>[   12.889190] [CAM]ov8810_probe called!
<6>[   12.945465] [CAM]ov8810_probe successed! rc = 0
<6>[   12.945831] [CAM]ov8810 s->node 1
<6>[   12.946014] [CAM]Ov8810: doing clk switch (ov8810)
<6>[   12.946197] SuperSoinc: clk switch (supersonic)(maincam)
<6>[   12.956512] [CAM]ov8810_sensor_probe, msm_camio_clk_rate_set 24000000
<6>[   13.095428] [CAM]ov8810_probe_read_id, ov8810_probe_init_sensor 1
<3>[   13.095794] msm_i2c msm_i2c.0: error, status 43c8 (36)
<3>[   13.096130] msm_i2c msm_i2c.0: Error during data xfer (-5) @36
<3>[   13.096374] [CAM]ov8810_i2c_rxdata failed!
<3>[   13.096557] [CAM]ov8810_i2c_read 0x300a failed!
<3>[   13.096862] starting read retry policy count:0
<3>[   13.097198] msm_i2c msm_i2c.0: error, status 43c8 (36)
<3>[   13.097534] msm_i2c msm_i2c.0: Error during data xfer (-5) @36
<3>[   13.097778] [CAM]ov8810_i2c_rxdata failed!
<3>[   13.097961] [CAM]ov8810_i2c_read 0x300a failed!
<3>[   13.100616] starting read retry policy count:1
<3>[   13.105194] msm_i2c msm_i2c.0: error, status 43c8 (36)
<3>[   13.110321] msm_i2c msm_i2c.0: Error during data xfer (-5) @36
<3>[   13.116027] [CAM]ov8810_i2c_rxdata failed!
<3>[   13.120178] [CAM]ov8810_i2c_read 0x300a failed!
<3>[   13.124572] starting read retry policy count:2
<3>[   13.129180] msm_i2c msm_i2c.0: error, status 43c8 (36)
<3>[   13.134246] msm_i2c msm_i2c.0: Error during data xfer (-5) @36
<3>[   13.139984] [CAM]ov8810_i2c_rxdata failed!
<3>[   13.144134] [CAM]ov8810_i2c_read 0x300a failed!
<3>[   13.148559] starting read retry policy count:3
<3>[   13.153228] msm_i2c msm_i2c.0: error, status 43c8 (36)
<3>[   13.158111] msm_i2c msm_i2c.0: Error during data xfer (-5) @36
<3>[   13.163909] [CAM]ov8810_i2c_rxdata failed!
<3>[   13.168121] [CAM]ov8810_i2c_read 0x300a failed!
<3>[   13.172485] starting read retry policy count:4
<3>[   13.177185] msm_i2c msm_i2c.0: error, status 43c8 (36)
<3>[   13.182037] msm_i2c msm_i2c.0: Error during data xfer (-5) @36
<3>[   13.188049] [CAM]ov8810_i2c_rxdata failed!
<3>[   13.191925] [CAM]ov8810_i2c_read 0x300a failed!
<3>[   13.196472] starting read retry policy count:5
<3>[   13.201141] msm_i2c msm_i2c.0: error, status 43c8 (36)
<3>[   13.206024] msm_i2c msm_i2c.0: Error during data xfer (-5) @36
<3>[   13.211975] [CAM]ov8810_i2c_rxdata failed!
<3>[   13.215911] [CAM]ov8810_i2c_read 0x300a failed!
<3>[   13.220397] starting read retry policy count:6
<3>[   13.225097] msm_i2c msm_i2c.0: error, status 43c8 (36)
<3>[   13.229980] msm_i2c msm_i2c.0: Error during data xfer (-5) @36
<3>[   13.235931] [CAM]ov8810_i2c_rxdata failed!
<3>[   13.239837] [CAM]ov8810_i2c_read 0x300a failed!
<3>[   13.244476] starting read retry policy count:7
<3>[   13.248962] msm_i2c msm_i2c.0: error, status 43c8 (36)
<3>[   13.253936] msm_i2c msm_i2c.0: Error during data xfer (-5) @36
<3>[   13.259887] [CAM]ov8810_i2c_rxdata failed!
<3>[   13.263793] [CAM]ov8810_i2c_read 0x300a failed!
<3>[   13.268463] starting read retry policy count:8
<3>[   13.272888] msm_i2c msm_i2c.0: error, status 43c8 (36)
<3>[   13.278015] msm_i2c msm_i2c.0: Error during data xfer (-5) @36
<3>[   13.283721] [CAM]ov8810_i2c_rxdata failed!
<3>[   13.287780] [CAM]ov8810_i2c_read 0x300a failed!
<3>[   13.292388] starting read retry policy count:9
<3>[   13.296875] msm_i2c msm_i2c.0: error, status 43c8 (36)
<3>[   13.301971] msm_i2c msm_i2c.0: Error during data xfer (-5) @36
<3>[   13.307678] [CAM]ov8810_i2c_rxdata failed!
<3>[   13.311828] [CAM]ov8810_i2c_read 0x300a failed!
<3>[   13.316253] starting read retry policy count:10
<3>[   13.321014] msm_i2c msm_i2c.0: error, status 43c8 (36)
<3>[   13.326019] msm_i2c msm_i2c.0: Error during data xfer (-5) @36
<3>[   13.331726] [CAM]ov8810_i2c_rxdata failed!
<3>[   13.335906] [CAM]ov8810_i2c_read 0x300a failed!
<3>[   13.340301] starting read retry policy count:11
<3>[   13.345031] msm_i2c msm_i2c.0: error, status 43c8 (36)
<3>[   13.350067] msm_i2c msm_i2c.0: Error during data xfer (-5) @36
<3>[   13.355804] [CAM]ov8810_i2c_rxdata failed!
<3>[   13.359924] [CAM]ov8810_i2c_read 0x300a failed!
<3>[   13.364318] starting read retry policy count:12
<3>[   13.369232] msm_i2c msm_i2c.0: error, status 43c8 (36)
<3>[   13.373962] msm_i2c msm_i2c.0: Error during data xfer (-5) @36
<3>[   13.379943] [CAM]ov8810_i2c_rxdata failed!
<3>[   13.383850] [CAM]ov8810_i2c_read 0x300a failed!
<3>[   13.388397] starting read retry policy count:13
<3>[   13.393249] msm_i2c msm_i2c.0: error, status 43c8 (36)
<3>[   13.398040] msm_i2c msm_i2c.0: Error during data xfer (-5) @36
<3>[   13.403961] [CAM]ov8810_i2c_rxdata failed!
<3>[   13.407928] [CAM]ov8810_i2c_read 0x300a failed!
<3>[   13.412414] starting read retry policy count:14
<3>[   13.417327] msm_i2c msm_i2c.0: error, status 43c8 (36)
<3>[   13.422058] msm_i2c msm_i2c.0: Error during data xfer (-5) @36
<3>[   13.428039] [CAM]ov8810_i2c_rxdata failed!
<3>[   13.431945] [CAM]ov8810_i2c_read 0x300a failed!
<3>[   13.436584] starting read retry policy count:15
<3>[   13.441223] msm_i2c msm_i2c.0: error, status 43c8 (36)
<3>[   13.446105] msm_i2c msm_i2c.0: Error during data xfer (-5) @36
<3>[   13.452056] [CAM]ov8810_i2c_rxdata failed!
<3>[   13.455993] [CAM]ov8810_i2c_read 0x300a failed!
<3>[   13.460632] starting read retry policy count:16
<3>[   13.465270] msm_i2c msm_i2c.0: error, status 63c8 (36)
<3>[   13.470275] msm_i2c msm_i2c.0: Error during data xfer (-5) @36
<3>[   13.476013] [CAM]ov8810_i2c_rxdata failed!
<3>[   13.480041] [CAM]ov8810_i2c_read 0x300a failed!
<3>[   13.484680] starting read retry policy count:17
<3>[   13.489349] msm_i2c msm_i2c.0: error, status 43c8 (36)
<3>[   13.494323] msm_i2c msm_i2c.0: Error during data xfer (-5) @36
<3>[   13.500030] [CAM]ov8810_i2c_rxdata failed!
<3>[   13.504180] [CAM]ov8810_i2c_read 0x300a failed!
<3>[   13.508605] starting read retry policy count:18
<3>[   13.513366] msm_i2c msm_i2c.0: error, status 43c8 (36)
<3>[   13.518371] msm_i2c msm_i2c.0: Error during data xfer (-5) @36
<3>[   13.524078] [CAM]ov8810_i2c_rxdata failed!
<3>[   13.528289] [CAM]ov8810_i2c_read 0x300a failed!
<3>[   13.532653] starting read retry policy count:19
<3>[   13.537170] [CAM]read sensor id fail
<6>[   13.540832] [CAM]ov8810 model_id + ver = 0x0
<6>[   13.544952] [CAM]ov8810_probe_read_id, Expected id=0x8810
<3>[   13.550476] [CAM]read sensor id incorrect
<6>[   13.554351] [CAM]ov8810_probe_read_id, vreg_get vreg_af_actuator
<6>[   13.560455] [CAM]ov8810_probe_init_sensor finishes
<3>[   13.565124] [CAM]SENSOR PROBE FAILS!
<3>[   13.568969] msm_sync_init: failed to initialize ov8810
<6>[   13.574066] s5k3h1gx_probe
<6>[   13.576843] sctrl.node 1
<6>[   13.578979] s5k3h1gx_sensor_probe()
<6>[   13.582489] s5k3h1gx_probe called!
<6>[   13.645477] s5k3h1gx_probe successed! rc = 0
<6>[   13.645690] s5k3h1 s->node 1
<6>[   13.645874] s5k3h1gx: s5k3h1gx_sensor_probe: switch clk
<6>[   13.646179] SuperSoinc: clk switch (supersonic)(maincam)
<6>[   13.666351] [Camera] gpio_request(105, "s5k3h1gx")
<6>[   13.775451] s5k3h1gx_probe_init_sensor
<6>[   13.776306] s5k3h1gx_i2c_rxdata: rxdata=0x38
<6>[   13.776519] s5k3h1gx_probe_init_sensor, Expected id=0x3810
<6>[   13.776824] s5k3h1gx_probe_init_sensor, Read id=0x3810
<6>[   13.777038] s5k3h1gx_probe_init_sensor finishes
<6>[   13.782318] [Camera] gpio_request(105, "s5k3h1gx")
<6>[   13.795440] s5k3h1gx:kobject creat and add
<6>[   13.795776] s5k3h1gx:sysfs_create_file
<6>[   13.795959] s5k3h1gx_sensor_probe: s5k3h1gx_probe_init_done 1719
<6>[   13.797058] device-mapper: uevent: version 1.0.3
<6>[   13.797576] device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@redhat.com
<6>[   13.797973] Bluetooth: HCI UART driver ver 2.2
<6>[   13.798156] Bluetooth: HCI H4 protocol initialized
<6>[   13.798370] Bluetooth: HCILL protocol initialized
<6>[   13.800872] mmc0: Qualcomm MSM SDCC at 0x00000000a0300000 irq 24,0 dma 8
<6>[   13.806396] mmc0: Platform slot type: N/A
<6>[   13.810455] mmc0: 4 bit data mode enabled
<6>[   13.814331] mmc0: 8 bit data mode disabled
<6>[   13.818664] mmc0: MMC clock 144000 -> 50000000 Hz, PCLK 64000000 Hz
<6>[   13.824768] mmc0: Slot eject status = 1
<6>[   13.828521] mmc0: Power save feature enable = 1
<6>[   13.833129] mmc0: DM non-cached buffer at ff010000, dma_addr 0x3bbd3000
<6>[   13.842681] mmc0: DM cmd busaddr 0x3bbd3000, cmdptr busaddr 0x3bbd3300
<6>[   13.846313] mmc1: Enable clocks
<4>[   13.849212] mmc_wimax_enable_host_wakeup mmc_wimax_sdio_status is OFF
<4>[   13.856292] supersonic_wimax_status_register
<4>[   13.859893] supersonic_wimax_status
<6>[   13.863586] mmc1: Qualcomm MSM SDCC at 0x00000000a0500000 irq 10,0 dma 8
<6>[   13.870208] mmc1: Platform slot type: SDIO(WiMAX)
<6>[   13.874755] mmc1: 4 bit data mode enabled
<6>[   13.881958] mmc1: 8 bit data mode disabled
<6>[   13.882812] mmc1: MMC clock 144000 -> 50000000 Hz, PCLK 64000000 Hz
<6>[   13.889221] mmc1: Slot eject status = 1
<6>[   13.892883] mmc1: Power save feature enable = 1
<6>[   13.897521] mmc1: DM non-cached buffer at ff011000, dma_addr 0x3bbd4000
<6>[   13.904113] mmc1: DM cmd busaddr 0x3bbd4000, cmdptr busaddr 0x3bbd4300
<6>[   13.911315] supersonic_sdslot_switchvdd: Disabling SD slot power
<6>[   13.919830] mmc2: Qualcomm MSM SDCC at 0x00000000a0400000 irq 26,0 dma 8
<6>[   13.923278] mmc2: Platform slot type: SD
<6>[   13.927154] mmc2: 4 bit data mode enabled
<6>[   13.931091] mmc2: 8 bit data mode disabled
<6>[   13.935577] mmc2: MMC clock 144000 -> 50000000 Hz, PCLK 64000000 Hz
<6>[   13.941406] mmc2: Slot eject status = 0
<6>[   13.945343] mmc2: Power save feature enable = 1
<6>[   13.949768] mmc2: DM non-cached buffer at ff012000, dma_addr 0x3bbd7000
<6>[   13.959625] mmc2: DM cmd busaddr 0x3bbd7000, cmdptr busaddr 0x3bbd7300
<6>[   13.962860] mmc2: Polling status mode enabled
<7>[   13.967651] Registered led device: button-backlight
<7>[   13.972381] Registered led device: amber
<7>[   13.976501] Registered led device: green
<7>[   13.980072] Registered led device: wimax
<6>[   13.983795] microp_led_probe: succeeded
<6>[   13.988647] logger: created 256K log 'log_main'
<6>[   13.992340] logger: created 256K log 'log_events'
<6>[   14.000091] logger: created 256K log 'log_radio'
<6>[   14.001617] logger: created 256K log 'log_system'
<6>[   14.006286] zram: num_devices not specified. Using default: 1
<6>[   14.011932] zram: Creating 1 devices ...
<6>[   14.016510] GACT probability NOT on
<6>[   14.019195] Mirror/redirect action on
<6>[   14.022979] u32 classifier
<6>[   14.025573]     Actions configured
<6>[   14.028900] Netfilter messages via NETLINK v0.30.
<6>[   14.033660] nf_conntrack version 0.5.0 (6571 buckets, 26284 max)
<6>[   14.043151] ctnetlink v0.93: registering with nfnetlink.
<6>[   14.044952] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
<6>[   14.051971] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
<6>[   14.058471] xt_time: kernel timezone is -0000
<6>[   14.062255] ip_tables: (C) 2000-2006 Netfilter Core Team
<6>[   14.067596] arp_tables: (C) 2002 David S. Miller
<6>[   14.072082] TCP cubic registered
<6>[   14.078399] NET: Registered protocol family 10
<6>[   14.081390] Mobile IPv6
<6>[   14.082000] ip6_tables: (C) 2000-2006 Netfilter Core Team
<6>[   14.087615] IPv6 over IPv4 tunneling driver
<6>[   14.092895] NET: Registered protocol family 17
<6>[   14.096313] NET: Registered protocol family 15
<5>[   14.100463] Bridge firewalling registered
<6>[   14.104614] Bluetooth: L2CAP ver 2.15
<6>[   14.108032] Bluetooth: L2CAP socket layer initialized
<6>[   14.113037] Bluetooth: SCO (Voice Link) ver 0.6
<6>[   14.126495] supersonic_sdslot_switchvdd: Setting level to 2900 (Success)
<6>[   14.126800] Bluetooth: SCO socket layer initialized
<6>[   14.129302] Bluetooth: RFCOMM TTY layer initialized
<6>[   14.133941] Bluetooth: RFCOMM socket layer initialized
<6>[   14.139251] Bluetooth: RFCOMM ver 1.11
<6>[   14.142791] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
<6>[   14.148468] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
<6>[   14.154144] VFP support v0.3: implementor 51 architecture 64 part 0f variant 0 rev 1
<6>[   14.161834] ThumbEE CPU extension supported.
<6>[   14.171600] clock_late_init() disabled 19 unused clocks
<4>[   14.201782] supersonic_wifi_init: start
<6>[   14.202362] supersonic_sdslot_switchvdd: Setting level to 2850 (Success)
<4>[   14.207550] regulator_init_complete: ldo2: incomplete constraints, leaving on
<4>[   14.208435] regulator_init_complete: ldo1: incomplete constraints, leaving on
<4>[   14.209442] regulator_init_complete: dcdc3: incomplete constraints, leaving on
<4>[   14.210327] regulator_init_complete: dcdc2: incomplete constraints, leaving on
<4>[   14.211303] regulator_init_complete: dcdc1: incomplete constraints, leaving on
<6>[   14.217803] acpu_set_vdd got regulator
<6>[   14.222686] rs30000048:00010000 rs30000048:00010000: setting system clock to 2014-06-25 10:42:23 UTC (1403692943)
<6>[   14.232116] Freeing init memory: 156K
<4>[   14.352722] mmc2: host does not support reading read-only switch. assuming write-enable.
<6>[   14.355133] mmc2: new high speed SDHC card at address 2165
<6>[   14.365814] mmcblk0: mmc2:2165 APPSD 7.50 GiB 
<6>[   14.367156]  mmcblk0: p1
<3>[   14.925231] init: /init.supersonic.rc: 207: invalid service name 'wimaxDumpLastKmsg'
<4>[   14.926513] init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead.
<3>[   14.998504] init: /dev/hw_random not found
<6>[   15.002868] yaffs: dev is 32505860 name is "mtdblock4" rw
<6>[   15.003051] yaffs: passed flags ""
<7>[   15.003326] yaffs: Attempting MTD mount of 31.4,"mtdblock4"
<6>[   15.115875] mmc1: Bus clock timer expired
<4>[   15.116241] mmc_wimax_enable_host_wakeup mmc_wimax_sdio_status is OFF
<6>[   15.116485] mmc1: Disable clocks
<7>[   15.259063] yaffs: yaffs_read_super: is_checkpointed 1
<6>[   15.261108] yaffs: dev is 32505862 name is "mtdblock6" rw
<6>[   15.261718] yaffs: passed flags ""
<7>[   15.262603] yaffs: Attempting MTD mount of 31.6,"mtdblock6"
<7>[   15.361663] yaffs: yaffs_read_super: is_checkpointed 1
<6>[   15.363159] yaffs: dev is 32505861 name is "mtdblock5" rw
<6>[   15.363677] yaffs: passed flags ""
<7>[   15.364196] yaffs: Attempting MTD mount of 31.5,"mtdblock5"
<7>[   15.373474] yaffs: yaffs_read_super: is_checkpointed 1
<3>[   15.654693] init: /dev/hw_random not found
<3>[   17.432769] healthd: wakealarm_init: timerfd_create failed
<3>[   17.741882] init: property 'sys.powerctl' doesn't exist while expanding '${sys.powerctl}'
<3>[   17.743804] init: powerctl: cannot expand '${sys.powerctl}'
<3>[   17.751098] init: property 'sys.sysctl.extra_free_kbytes' doesn't exist while expanding '${sys.sysctl.extra_free_kbytes}'
<3>[   17.755218] init: cannot expand '${sys.sysctl.extra_free_kbytes}' while writing to '/proc/sys/vm/extra_free_kbytes'
<6>[   17.866485] enabling adb
<6>[   17.868133] adb_open
<6>[   18.029693] warning: `rild' uses 32-bit capabilities (legacy support in use)
<6>[   18.193634] qmi: smd closed
<6>[   18.193908] qmi: smd opened
<6>[   18.194824] qmi: ctl: wds use client_id 0x01
<6>[   18.195098] qmi: smd closed
<6>[   18.195251] qmi: smd opened
<6>[   18.195556] qmi: smd closed
<6>[   18.195709] qmi: smd opened
<6>[   18.200897] qmi: ctl: wds use client_id 0x01
<6>[   18.201171] qmi: ctl: wds use client_id 0x01
<6>[   18.935546] msmfb: pan_update in state(1)
<6>[   18.935577] msmfb: full update starting
<6>[   18.970336] msmfb: full update completed
<6>[   18.970581] msmfb: turning on panel
<7>[   18.970794] supersonic_panel_unblank
<7>[   18.971038] turn on backlight
<7>[   18.971191] set brightness = 255
<6>[   20.647766] htc-acoustic: open
<6>[   20.658172] htc-acoustic: mmap
<6>[   20.658569] htc-acoustic: ioctl
<6>[   20.658721] htc-acoustic: ioctl: ACOUSTIC_UPDATE_ADIE called 113.
<6>[   20.660461] htc-acoustic: ioctl: ONCRPC_UPDATE_ADIE_PROC success.
<6>[   20.662048] htc-acoustic: release
<6>[   35.494598] lightsensor_ioctl get enabled status: 0
<6>[   35.495178] capella_cm3602_open
<6>[   35.495391] capella_cm3602_ioctl cmd 1
<6>[   35.496215] capella_cm3602_ioctl cmd 2
<6>[   35.497741] capella_cm3602_disable
<6>[   35.497924] capella_cm3602_disable: already disabled
<6>[   35.498138] capella_cm3602_release
<6>[   35.498474] capella_cm3602_disable
<6>[   35.498657] capella_cm3602_disable: already disabled
<6>[   35.536499] __spi_bma150_set_mode: BMA get into NORMAL mode!
<6>[   35.816864] __spi_bma150_set_mode: BMA get into SLEEP mode!
<6>[   36.746368] audio: init: codecs
<6>[   36.860382] dal_attach: status = 0, name = 'DAL_AQ_AUD'
<6>[   36.860565] audio: init: INIT
<6>[   36.860992] audio: init: OPEN control
<6>[   37.249328] audio: init: attach ACDB
<6>[   37.356506] dal_attach: status = 0, name = 'DAL_AM_AUD'
<6>[   37.356689] audio: init: attach ADIE
<6>[   37.357269] dal_attach: status = 0, name = 'DAL_AM_AUD'
<6>[   37.357452] Audio: supersonic_analog_init
<6>[   37.376434] acdb: load 'default.acdb'
<6>[   37.420288] acdb: 864 bytes for device 607, rate 48000.
<6>[   37.435119] acdb: 663 bytes for device 6, rate 8000.
<6>[   37.447753] Audio: supersonic_get_rx_vol -1100
<6>[   42.258514] batt: SMEM_BATT: get_batt_info: batt_id=2, batt_vol=3828, batt_temp=354, batt_current=0, eval_current=378, level=66, charging_source=0, charging_enabled=0, full_bat=1500000, over_vchg=0 at 39323031582 (2014-06-25 10:42:51.529302912 UTC)
<6>[   42.259277] batt: SMEM_BATT: get_batt_info: batt_id=2, batt_vol=3828, batt_temp=354, batt_current=0, eval_current=378, level=66, charging_source=0, charging_enabled=0, full_bat=1500000, over_vchg=0 at 39323794521 (2014-06-25 10:42:51.530096369 UTC)
<6>[   42.260467] healthd: battery l=66 v=3 t=35.4 h=2 st=4 chg=
<6>[   42.285675] request_suspend_state: wakeup (3->0) at 39349673428 (2014-06-25 10:42:51.556463557 UTC)
<6>[   42.436523] __spi_bma150_set_mode: BMA get into NORMAL mode!
<6>[   43.450195] Audio: supersonic_get_rx_vol 100
<6>[   43.858123] lightsensor_ioctl set value = 1
<6>[   43.858428] lightsensor_enable
<7>[   43.921966] set brightness = 102
<4>[   44.052215] ## wifi_probe
<4>[   44.052429] wifi_set_power = 1
<6>[   44.052673] supersonic_wifi_power: 1
<7>[   44.088378] set brightness = 132
<7>[   44.296752] ALS value: 0x0, level: 0 #
<7>[   44.299926] set brightness = 175
<7>[   44.393798] set brightness = 189
<7>[   44.444610] set brightness = 205
<7>[   44.656951] set brightness = 249
<7>[   44.757690] set brightness = 255
<4>[   47.634857] wifi_set_carddetect = 1
<6>[   47.635040] supersonic_wifi_set_carddetect: 1
<7>[   47.635314] mmc0: card_present 1
<6>[   47.635467] mmc0: Slot status change detected (0 -> 1)
<4>[   47.663574] 
<4>[   47.663604] Dongle Host Driver, version 5.90.195.98
<4>[   47.663604] Compiled in drivers/net/wireless/bcmdhd on Apr 22 2014 at 14:01:05
<4>[   50.189239] mmc0: queuing unknown CIS tuple 0x91 (3 bytes)
<6>[   50.189453] mmc0: new high speed SDIO card at address 0001
<4>[   50.191162] F1 signature read @0x18000000=0x9934329
<4>[   50.193206] DHD: dongle ram size is set to 294912(orig 294912)
<4>[   50.200653] wl_create_event_handler thr:2da started
<4>[   50.202758] dhd_attach thr:2db started
<4>[   50.205200] dhd_attach thr:2dc started
<4>[   50.210296] dhd_attach thr:2dd started
<4>[   50.210601] wifi_get_mac_addr
<4>[   50.211669] Broadcom Dongle Host Driver: register interface [wlan0] MAC: 00:90:4c:11:22:33
<4>[   50.212677] wifi_set_power = 0
<6>[   50.212829] supersonic_wifi_power: 0
<4>[   51.413513] =========== WLAN placed in RESET ========
<6>[   51.696411] led_ril_status_value = 0
<6>[   51.746795] led_ril_status_value = 0
<4>[   51.954864] 
<4>[   51.954864] Dongle Host Driver, version 5.90.195.98
<4>[   51.954895] Compiled in drivers/net/wireless/bcmdhd on Apr 22 2014 at 14:01:05
<4>[   51.955474] wl_android_wifi_on in
<4>[   51.955627] wifi_set_power = 1
<6>[   51.955780] supersonic_wifi_power: 1
<4>[   52.684265] =========== WLAN going back to live  ========
<4>[   52.684478] sdio_reset_comm():
<4>[   52.785461] dhdsdio_write_vars: Download, Upload and compare of NVRAM succeeded.
<4>[   52.866851] wifi_get_mac_addr
<4>[   52.867736] Firmware up: op_mode=1, Broadcom Dongle Host Driver mac=7c:61:93:ae:25:19
<4>[   52.873168] Firmware version = wl0: May 25 2012 17:57:45 version 4.218.248.44
<3>[   52.874450] CFGP2P-ERROR) wl_cfgp2p_supported : wl p2p error -23
<3>[   53.009063] CFG80211-ERROR) wl_construct_reginfo : get chanspecs failed with -23
<3>[   53.009521] CFG80211-ERROR) wl_update_wiphybands : wl_construct_reginfo() fails err=-23
<3>[   53.563873] CFG80211-ERROR) wl_construct_reginfo : get chanspecs failed with -23
<3>[   53.564208] CFG80211-ERROR) wl_update_wiphybands : wl_construct_reginfo() fails err=-23
<4>[   53.770690] wl_bss_connect_done succeeded
<4>[   53.836090] wl_bss_connect_done succeeded
<4>[   55.288574] Unknown PRIVATE command WLS_BATCHING GET - ignored
<4>[   55.290008] Unknown PRIVATE command WLS_BATCHING STOP - ignored
<3>[   55.687469] qtaguid: iface_stat: stat_update() wlan0 not found
<7>[   56.327850] set brightness = 254
<7>[   56.354858] set brightness = 253
<7>[   56.372100] set brightness = 252
<7>[   56.404449] set brightness = 251
<7>[   56.421142] set brightness = 250
<7>[   56.454620] set brightness = 249
<7>[   56.471130] set brightness = 248
<7>[   56.505462] set brightness = 247
<7>[   56.523742] set brightness = 246
<7>[   56.554260] set brightness = 245
<7>[   58.321502] set brightness = 244
<7>[   58.354492] set brightness = 243
<7>[   58.371185] set brightness = 242
<7>[   58.405059] set brightness = 241
<7>[   58.421173] set brightness = 240
<7>[   58.455780] set brightness = 239
<7>[   58.471191] set brightness = 238
<7>[   58.504486] set brightness = 237
<7>[   58.521942] set brightness = 236
<7>[   58.554260] set brightness = 235
<7>[   60.321105] set brightness = 234
<7>[   60.354583] set brightness = 233
<7>[   60.371185] set brightness = 232
<7>[   60.404510] set brightness = 231
<7>[   60.421203] set brightness = 230
<7>[   60.454467] set brightness = 229
<7>[   60.475311] set brightness = 228
<7>[   60.504486] set brightness = 227
<7>[   60.521240] set brightness = 226
<7>[   60.555725] set brightness = 225
<7>[   60.570983] set brightness = 224
<7>[   62.322387] set brightness = 223
<7>[   62.356140] set brightness = 222
<7>[   62.372772] set brightness = 221
<7>[   62.405944] set brightness = 220
<7>[   62.422668] set brightness = 219
<7>[   62.455810] set brightness = 218
<7>[   62.473693] set brightness = 217
<7>[   62.506103] set brightness = 216
<7>[   62.524444] set brightness = 215
<7>[   62.554443] set brightness = 214
<7>[   62.571044] set brightness = 213
<7>[   62.604156] set brightness = 212
<7>[   64.322479] set brightness = 211
<7>[   64.355987] set brightness = 210
<7>[   64.372711] set brightness = 209
<7>[   64.405822] set brightness = 208
<7>[   64.422515] set brightness = 207
<7>[   64.457275] set brightness = 206
<7>[   64.472595] set brightness = 205
<7>[   64.505920] set brightness = 204
<7>[   64.521911] set brightness = 203
<4>[   66.173889] wds: 0020 @ 01
<3>[   66.174377] qmi: wds: network start failed (000e)
<7>[   66.321228] set brightness = 202
<7>[   66.354461] set brightness = 201
<7>[   66.371185] set brightness = 200
<7>[   66.404693] set brightness = 199
<7>[   66.421264] set brightness = 198
<7>[   66.455169] set brightness = 197
<7>[   66.471801] set brightness = 196
<7>[   66.505981] set brightness = 195
<7>[   66.522552] set brightness = 194
<7>[   66.555969] set brightness = 193
<7>[   66.571960] set brightness = 192
<6>[   67.736724] Release 'boot-time' no_halt_lock
<7>[   68.322692] set brightness = 191
<7>[   68.356109] set brightness = 190
<7>[   68.372741] set brightness = 189
<7>[   68.405822] set brightness = 188
<7>[   68.422607] set brightness = 187
<7>[   68.455841] set brightness = 186
<7>[   68.472595] set brightness = 185
<7>[   68.505828] set brightness = 184
<7>[   68.522613] set brightness = 183
<7>[   68.555908] set brightness = 182
<7>[   68.572601] set brightness = 181
<7>[   68.605865] set brightness = 180
<7>[   68.622619] set brightness = 179
<7>[   68.657562] set brightness = 178
<7>[   68.672546] set brightness = 177
<7>[   68.705932] set brightness = 176
<7>[   68.722564] set brightness = 175
<7>[   68.755889] set brightness = 174
<7>[   68.772521] set brightness = 173
<7>[   68.805877] set brightness = 172
<7>[   68.822509] set brightness = 171
<7>[   68.855804] set brightness = 170
<7>[   68.871917] set brightness = 169
<7>[   70.339599] set brightness = 168
<7>[   70.356109] set brightness = 167
<7>[   70.390716] set brightness = 166
<7>[   70.405883] set brightness = 165
<7>[   70.438903] set brightness = 164
<7>[   76.338195] set brightness = 163
<7>[   76.355987] set brightness = 162
<7>[   76.388427] set brightness = 161
<7>[   76.405548] set brightness = 160
<7>[   76.439361] set brightness = 159
<7>[   76.455505] set brightness = 158
<7>[   78.388488] set brightness = 157
<7>[   78.404510] set brightness = 156
<7>[   78.499603] set brightness = 153
<7>[   78.510437] set brightness = 152
<7>[   78.537963] set brightness = 151
<7>[   78.554473] set brightness = 150
<7>[   78.588195] set brightness = 149
<7>[   78.604553] set brightness = 148
<7>[   78.686431] set brightness = 146
<7>[   78.693939] set brightness = 145
<7>[   78.763031] set brightness = 142
<7>[   78.788726] set brightness = 141
<7>[   80.388061] set brightness = 140
<7>[   80.404541] set brightness = 139
<7>[   80.437896] set brightness = 138
<7>[   80.454589] set brightness = 137
<7>[   80.488098] set brightness = 136
<7>[   80.504547] set brightness = 135
<7>[   80.538146] set brightness = 134
<7>[   80.554504] set brightness = 133
<7>[   80.588378] set brightness = 132
<7>[   80.604461] set brightness = 131
<7>[   80.638153] set brightness = 130
<7>[   80.655792] set brightness = 129
<7>[   80.687774] set brightness = 128
<7>[   82.389099] set brightness = 127
<7>[   82.404754] set brightness = 126
<7>[   82.439025] set brightness = 125
<7>[   82.454711] set brightness = 124
<7>[   82.488220] set brightness = 123
<7>[   82.504547] set brightness = 122
<7>[   82.538146] set brightness = 121
<7>[   82.554565] set brightness = 120
<7>[   82.588562] set brightness = 119
<7>[   82.604614] set brightness = 118
<7>[   82.638214] set brightness = 117
<7>[   82.654266] set brightness = 116
<6>[   87.767456] lightsensor_ioctl set value = 0
<6>[   87.768005] lightsensor_disable
<7>[   88.578155] set brightness = 0
<6>[   88.597564] request_suspend_state: sleep (0->3) at 85660917362 (2014-06-25 10:43:37.649495888 UTC)
<6>[   88.597625] [R] early_suspend start
<6>[   88.727264] __spi_bma150_set_mode: BMA get into SLEEP mode!
<7>[   88.727569] bma150_early_suspend: spi_bma150_set_mode returned = 0!
<7>[   88.745788] supersonic_panel_blank
<7>[   88.746032] set brightness = 0
<4>[   88.746856] [hdmi/fb]hdmifb_suspend, use_count=0
<4>[   88.747894] [hdmi/fb]hdmifb_suspend: hdmifb_suspending = true
<4>[   88.748168] [hdmi/lcdc]lcdc_suspend
<4>[   88.748535] [hdmi/tx]hdmi_panel_uninit
<4>[   88.748779] [hdmi]suc_hdmi_gpio_off
<4>[   88.749359] [hdmi/tx]suspending=true, disable timer
<4>[   88.749755] [hdmi/tx]hdmi_panel_uninit
<4>[   88.749969] [hdmi/tx]hdmi_standby
<4>[   88.752777] [hdmi/tx]hdmi_standby: INT_EN=01
<3>[   88.754486] msm_i2c msm_i2c.0: error, status 43c8 (3B)
<3>[   88.754760] msm_i2c msm_i2c.0: Error during data xfer (-5) @3B
<4>[   88.756164] [hdmi]hdmi_power(4)
<4>[   88.761077] [hdmi/lcdc]lcdc_disable_video, blank_count=0
<7>[   88.764556] __capella_cm3602_power: Turn the capella_cm3602 power off
<6>[   88.776855] atmel_ts_suspend: enter
<4>[   88.778778] dhd_set_suspend: force extra Suspend setting 
<7>[   88.782562] mddi_novatec_power: power off.
<4>[   88.793304] dhd_get_dtim_skip bcn_li_dtim=3 DTIM=3 Listen=10
<6>[   88.807373] __spi_bma150_set_mode: BMA get into SLEEP mode!
<6>[   88.907043] [R] early_suspend: sync
<6>[   89.020141] [R] early_suspend end
<6>[   97.744476] batt: M2A_RPC: level_update: 65 at 94808469819 (2014-06-25 10:43:46.796407476 UTC)
<6>[   97.746002] batt: batt:power_supply_changed: battery at 94809904145 (2014-06-25 10:43:46.797933354 UTC)
<6>[   97.749816] batt: SMEM_BATT: get_batt_info: batt_id=2, batt_vol=3877, batt_temp=354, batt_current=0, eval_current=46, level=65, charging_source=0, charging_enabled=0, full_bat=1500000, over_vchg=0 at 94814756440 (2014-06-25 10:43:46.801717534 UTC)
<6>[   97.752227] batt: SMEM_BATT: get_batt_info: batt_id=2, batt_vol=3877, batt_temp=354, batt_current=0, eval_current=46, level=65, charging_source=0, charging_enabled=0, full_bat=1500000, over_vchg=0 at 94821958589 (2014-06-25 10:43:46.804128423 UTC)
<6>[   97.763824] healthd: battery l=65 v=3 t=35.4 h=2 st=4 chg=
<6>[  103.255187] gpio_keys_scan_keys: key 1-73, 1 (41) changed to 1
<6>[  103.437652] gpio_keys_scan_keys: key 1-73, 1 (41) changed to 0
<6>[  104.774291] gpio_keys_scan_keys: key 1-74, 0 (94) changed to 1
<6>[  104.783355] lightsensor_ioctl set value = 1
<6>[  104.783752] lightsensor_enable
<3>[  104.783966] lightsensor_enable: microp is suspended
<6>[  104.807922] request_suspend_state: wakeup (3->0) at 101871275028 (2014-06-25 10:43:53.859853554 UTC)
<6>[  104.808410] [R] late_resume start
<6>[  104.857513] __spi_bma150_set_mode: BMA get into NORMAL mode!
<6>[  104.871368] msmfb: pan_update in state(4)
<6>[  104.871398] msmfb: drawing while asleep
<6>[  104.906799] mddi_wait_interrupt 10, timeout waiting for 4000, INT = 10, STAT = 10 gotint = 2a004
<6>[  104.911529] gpio_keys_scan_keys: key 1-74, 0 (94) changed to 0
<6>[  104.972656] msmfb: pan_update in state(4)
<6>[  104.972656] msmfb: drawing while asleep
<6>[  105.006744] mddi_wait_interrupt 10, timeout waiting for 20000, INT = 10, STAT = 10 gotint = a004
<7>[  105.006774] mddi_novatec_power: power on.
<6>[  105.072753] msmfb: pan_update in state(4)
<6>[  105.072784] msmfb: drawing while asleep
<6>[  105.168579] msmfb: pan_update in state(4)
<6>[  105.168579] msmfb: drawing while asleep
<6>[  105.266815] msmfb: ready, waiting for full update
<7>[  105.279113] set brightness = 98
<6>[  105.283630] msmfb: pan_update in state(1)
<6>[  105.283660] msmfb: full update starting
<7>[  105.288543] set brightness = 97
<7>[  105.289031] __capella_cm3602_power: Turn the capella_cm3602 power on
<4>[  105.289367] [hdmi/fb]hdmifb_resume
<4>[  105.289733] [hdmi/lcdc]lcdc_resume
<4>[  105.289947] [hdmi/tx]hdmi_panel_init
<4>[  105.290161] [hdmi]suc_hdmi_gpio_on
<4>[  105.290893] [hdmi]hdmi_power(5)
<6>[  105.291259] [R] late_resume end
<7>[  105.304901] set brightness = 96
<6>[  105.308868] msmfb: pan_update in state(3)
<6>[  105.318023] msmfb: full update completed
<6>[  105.318115] msmfb: turning on panel
<7>[  105.318115] supersonic_panel_unblank
<7>[  105.318145] turn on backlight
<7>[  105.318145] set brightness = 96
<6>[  105.331542] Touch Status: 0x01 0x10 0xEA 0xD8 0x09 
<6>[  105.337280] Touch Status: 0x01 0x00 0xEA 0xD8 0x09 
<7>[  105.338562] set brightness = 95
<7>[  105.354461] set brightness = 94
<7>[  105.389343] set brightness = 93
<7>[  105.404571] set brightness = 92
<7>[  105.437896] set brightness = 91
<7>[  105.454559] set brightness = 90
<7>[  105.487915] set brightness = 89
<7>[  106.147399] ALS value: 0x0, level: 0 #
<7>[  106.267333] ALS value: 0x0, level: 0 #
<6>[  106.306945] S1@490,747
<6>[  106.490692] E1@907,753
<6>[  108.039459] check_calibration: calibration confirm
<6>[  157.847290] batt: SMEM_BATT: get_batt_info: batt_id=2, batt_vol=3829, batt_temp=354, batt_current=0, eval_current=332, level=65, charging_source=0, charging_enabled=0, full_bat=1500000, over_vchg=0 at 154911130985 (2014-06-25 10:44:46.899190712 UTC)
<6>[  157.848022] batt: SMEM_BATT: get_batt_info: batt_id=2, batt_vol=3829, batt_temp=354, batt_current=0, eval_current=332, level=65, charging_source=0, charging_enabled=0, full_bat=1500000, over_vchg=0 at 154911954959 (2014-06-25 10:44:46.899984169 UTC)
<6>[  157.849304] healthd: battery l=65 v=3 t=35.4 h=2 st=4 chg=
<4>[  173.484802] wds: 0020 @ 01
<6>[  173.485260] qmi: wds: got handle 0x01c20fc0
<4>[  173.486145] wds: 0022 @ ff
<6>[  173.486572] qmi: wds: CONNECTED
<4>[  173.489868] wds: 002d @ 01
<4>[  173.490325] qmi: got network profile
<6>[  173.492462] rmnet_open()
<4>[  173.818237] wds: 0021 @ 01
<6>[  173.818725] qmi: wds: network stopped
<4>[  173.819183] wds: 0022 @ ff
<6>[  173.819976] qmi: wds: DISCONNECTED
<6>[  173.821777] rmnet_stop()
<6>[  187.738586] batt: M2A_RPC: level_update: 64 at 184802152713 (2014-06-25 10:45:16.790517616 UTC)
<6>[  187.739044] batt: batt:power_supply_changed: battery at 184802610476 (2014-06-25 10:45:16.791005897 UTC)
<6>[  187.740447] batt: SMEM_BATT: get_batt_info: batt_id=2, batt_vol=3830, batt_temp=357, batt_current=0, eval_current=294, level=64, charging_source=0, charging_enabled=0, full_bat=1500000, over_vchg=0 at 184804472049 (2014-06-25 10:45:16.792409705 UTC)
<6>[  187.741516] batt: SMEM_BATT: get_batt_info: batt_id=2, batt_vol=3830, batt_temp=357, batt_current=0, eval_current=294, level=64, charging_source=0, charging_enabled=0, full_bat=1500000, over_vchg=0 at 184818662722 (2014-06-25 10:45:16.793477821 UTC)
<6>[  187.757232] healthd: battery l=64 v=3 t=35.7 h=2 st=4 chg=
<6>[  247.827178] batt: SMEM_BATT: get_batt_info: batt_id=2, batt_vol=3835, batt_temp=357, batt_current=0, eval_current=296, level=64, charging_source=0, charging_enabled=0, full_bat=1500000, over_vchg=0 at 244891111455 (2014-06-25 10:46:16.879140665 UTC)
<6>[  247.828002] batt: SMEM_BATT: get_batt_info: batt_id=2, batt_vol=3835, batt_temp=357, batt_current=0, eval_current=296, level=64, charging_source=0, charging_enabled=0, full_bat=1500000, over_vchg=0 at 244891904912 (2014-06-25 10:46:16.879964639 UTC)
<6>[  247.829742] healthd: battery l=64 v=3 t=35.7 h=2 st=4 chg=
<6>[  290.633911] batt: M2A_RPC: set_charging: 1 at 287697446903 (2014-06-25 10:46:59.685842323 UTC)
<6>[  290.634246] TPS65200 Switch charger set control1
<6>[  290.634521] Switch charger ON (SLOW)
<6>[  290.643920] batt: M2A_RPC: cable_update: USB at 287707487186 (2014-06-25 10:46:59.695882607 UTC)
<6>[  290.644378] batt: htc_cable_status_update: 0 -> 1
<6>[  290.644561] msm_hsusb_set_vbus_state: 1
<6>[  290.644805] supersonic_uart_usb_switch:uart:0
<6>[  290.645019] hsusb: OFFLINE -> ONLINE
<6>[  290.645172] usb: lpm exit
<6>[  290.646575] hsusb: reset controller
<6>[  290.686706] msm_hsusb_phy_reset
<6>[  290.896759] msm72k_udc: ulpi: write 0x0c to 0x31
<6>[  290.897033] msm72k_udc: ulpi: write 0x30 to 0x32
<6>[  290.897216] msm72k_udc: ulpi: write 0x1d to 0x0d
<6>[  290.897369] msm72k_udc: ulpi: write 0x1d to 0x10
<6>[  290.897674] usb: notify offline
<6>[  290.897827] msm_hsusb: enable pullup
<6>[  290.901000] msm72k_udc: usb: suspend
<6>[  290.916748] usb: not AC charger
<6>[  291.027130] msm72k_udc: usb: reset
<6>[  291.027343] usb: send connect type 1
<6>[  291.027618] Touch: cable change to 1
<6>[  291.029418] msm72k_udc: usb: portchange USB_SPEED_HIGH
<6>[  291.030853] batt:online=1
<6>[  291.031127] batt: Update SMEM: cable type 1 at 288094785770 (2014-06-25 10:47:00.083059120 UTC)
<6>[  291.032653] batt: SMEM_BATT: get_batt_info: batt_id=2, batt_vol=3897, batt_temp=357, batt_current=0, eval_current=0, level=64, charging_source=1, charging_enabled=1, full_bat=1500000, over_vchg=0 at 288096555789 (2014-06-25 10:47:00.084584999 UTC)
<6>[  291.033416] batt: SMEM_BATT: get_batt_info: batt_id=2, batt_vol=3897, batt_temp=357, batt_current=0, eval_current=0, level=64, charging_source=1, charging_enabled=1, full_bat=1500000, over_vchg=0 at 288114713747 (2014-06-25 10:47:00.085378456 UTC)
<6>[  291.054290] healthd: battery l=64 v=3 t=35.7 h=2 st=2 chg=u
<6>[  291.087524] batt: SMEM_BATT: get_batt_info: batt_id=2, batt_vol=3897, batt_temp=357, batt_current=0, eval_current=0, level=64, charging_source=1, charging_enabled=1, full_bat=1500000, over_vchg=0 at 288151334843 (2014-06-25 10:47:00.139455605 UTC)
<6>[  291.088317] batt: SMEM_BATT: get_batt_info: batt_id=2, batt_vol=3897, batt_temp=357, batt_current=0, eval_current=0, level=64, charging_source=1, charging_enabled=1, full_bat=1500000, over_vchg=0 at 288170347295 (2014-06-25 10:47:00.140249062 UTC)
<6>[  291.107879] healthd: battery l=64 v=3 t=35.7 h=2 st=2 chg=u
<6>[  291.108673] batt: SMEM_BATT: get_batt_info: batt_id=2, batt_vol=3897, batt_temp=357, batt_current=0, eval_current=0, level=64, charging_source=1, charging_enabled=1, full_bat=1500000, over_vchg=0
<6>[  291.142517] msm72k_udc: usb: reset
<6>[  291.144805] msm72k_udc: usb: portchange USB_SPEED_HIGH
<4>[  291.173431]  at 288236784061 (2014-06-25 10:47:00.160604287 UTC)
<6>[  291.173980] batt: SMEM_BATT: get_batt_info: batt_id=2, batt_vol=3897, batt_temp=357, batt_current=0, eval_current=0, level=64, charging_source=1, charging_enabled=1, full_bat=1500000, over_vchg=0 at 288237913211 (2014-06-25 10:47:00.225942421 UTC)
<6>[  291.175231] healthd: battery l=64 v=3 t=35.7 h=2 st=2 chg=u
<6>[  291.283569] android_usb gadget: high speed config #1: android
<7>[  292.467376] ALS value: 0x3, level: 0 #
<7>[  311.567352] ALS value: 0x2, level: 0 #
<7>[  325.887359] ALS value: 0x4, level: 1 #
<7>[  329.921142] set brightness = 90
<7>[  329.944427] set brightness = 91
<7>[  329.971191] set brightness = 92
<7>[  329.988250] set brightness = 93
<7>[  330.021118] set brightness = 94
<7>[  330.038177] set brightness = 95
<7>[  330.071289] set brightness = 96
<7>[  330.092590] set brightness = 97
<7>[  330.121185] set brightness = 98
<7>[  330.137847] set brightness = 99
<7>[  330.171142] set brightness = 100
<7>[  330.188201] set brightness = 101
<7>[  330.221191] set brightness = 102
<7>[  330.242065] set brightness = 103
<7>[  330.273071] set brightness = 104
<7>[  330.290924] set brightness = 105
<7>[  330.321166] set brightness = 106
<7>[  330.338195] set brightness = 107
<7>[  330.371124] set brightness = 108
<7>[  330.391876] set brightness = 109
<7>[  330.421234] set brightness = 110
<7>[  330.437866] set brightness = 111
<7>[  330.471160] set brightness = 112
<7>[  330.488891] set brightness = 113
<7>[  330.521118] set brightness = 114
<7>[  330.542724] set brightness = 115
<7>[  330.571685] set brightness = 116
<7>[  330.588592] set brightness = 117
<7>[  330.628204] set brightness = 118
<7>[  330.651519] set brightness = 119
<7>[  330.671844] set brightness = 120
<7>[  330.693328] set brightness = 121
<7>[  330.721618] set brightness = 122
<7>[  330.738433] set brightness = 123
<7>[  330.771728] set brightness = 124
<7>[  330.788635] set brightness = 125
<7>[  330.821655] set brightness = 126
<7>[  330.842346] set brightness = 127
<7>[  330.871337] set brightness = 128
<7>[  330.887847] set brightness = 129
<7>[  330.921173] set brightness = 130
<7>[  330.939971] set brightness = 131
<7>[  330.971191] set brightness = 132
<7>[  330.992462] set brightness = 133
<7>[  331.021240] set brightness = 134
<7>[  331.037811] set brightness = 135
<7>[  331.071166] set brightness = 136
<7>[  331.088470] set brightness = 137
<7>[  331.121154] set brightness = 138
<7>[  331.141815] set brightness = 139
<7>[  331.171234] set brightness = 140
<7>[  331.188018] set brightness = 141
<7>[  331.221160] set brightness = 142
<7>[  331.238189] set brightness = 143
<7>[  331.271148] set brightness = 144
<7>[  331.292114] set brightness = 145
<7>[  331.321228] set brightness = 146
<7>[  331.357330] set brightness = 147
<7>[  331.377868] set brightness = 148
<7>[  331.396514] set brightness = 149
<7>[  331.449859] set brightness = 151
<7>[  331.480102] set brightness = 152
<7>[  331.513824] set brightness = 153
<7>[  331.549804] set brightness = 155
<7>[  331.581085] set brightness = 156
<7>[  331.599060] set brightness = 157
<7>[  331.640777] set brightness = 159
<7>[  331.707946] set brightness = 161
<7>[  331.724578] set brightness = 162
<7>[  331.762451] set brightness = 163
<7>[  331.788269] set brightness = 164
<7>[  333.557434] ALS value: 0x2, level: 0 #
<7>[  335.427703] ALS value: 0x4, level: 1 #
<7>[  344.255859] set brightness = 161
<7>[  344.272674] set brightness = 157
<7>[  344.289459] set brightness = 154
<7>[  344.305877] set brightness = 151
<7>[  344.322479] set brightness = 147
<7>[  344.339569] set brightness = 144
<7>[  344.355804] set brightness = 141
<7>[  344.372528] set brightness = 137
<7>[  344.389526] set brightness = 134
<7>[  344.405853] set brightness = 131
<7>[  344.422546] set brightness = 127
<7>[  344.439575] set brightness = 124
<7>[  344.455810] set brightness = 121
<7>[  344.472534] set brightness = 117
<7>[  344.489440] set brightness = 114
<7>[  344.505828] set brightness = 111
<7>[  344.522460] set brightness = 107
<7>[  344.539520] set brightness = 104
<7>[  344.555816] set brightness = 101
<7>[  344.572601] set brightness = 97
<7>[  344.590576] set brightness = 94
<7>[  344.605865] set brightness = 91
<7>[  344.622497] set brightness = 87
<7>[  344.663909] set brightness = 81
<7>[  344.694030] set brightness = 74
<7>[  344.719299] set brightness = 71
<7>[  344.737915] set brightness = 67
<7>[  344.744506] set brightness = 64
<7>[  344.758941] set brightness = 61
<7>[  344.776367] set brightness = 57
<7>[  344.878143] set brightness = 37
<7>[  344.890960] set brightness = 34
<7>[  344.913146] set brightness = 31
<7>[  344.921112] set brightness = 27
<7>[  344.940216] set brightness = 24
<7>[  344.954620] set brightness = 21
<7>[  344.971557] set brightness = 17
<7>[  344.993530] set brightness = 14
<7>[  345.004425] set brightness = 11
<7>[  345.021087] set brightness = 10
<6>[  351.234375] lightsensor_ioctl set value = 0
<6>[  351.234558] lightsensor_disable
<7>[  351.843353] set brightness = 0
<4>[  351.901275] dhd_set_suspend: force extra Suspend setting 
<4>[  351.914062] dhd_get_dtim_skip bcn_li_dtim=3 DTIM=3 Listen=10
<6>[  351.947235] __spi_bma150_set_mode: BMA get into SLEEP mode!
<6>[  351.947967] request_suspend_state: sleep (0->3) at 349011320194 (2014-06-25 10:48:00.999898720 UTC)
<6>[  351.948425] [R] early_suspend start
<6>[  352.027496] __spi_bma150_set_mode: BMA get into SLEEP mode!
<7>[  352.027893] bma150_early_suspend: spi_bma150_set_mode returned = 0!
<7>[  352.045959] supersonic_panel_blank
<7>[  352.046203] set brightness = 0
<4>[  352.047576] [hdmi/fb]hdmifb_suspend, use_count=0
<4>[  352.047821] [hdmi/fb]hdmifb_suspend: hdmifb_suspending = true
<4>[  352.048248] [hdmi/lcdc]lcdc_suspend
<4>[  352.048461] [hdmi/tx]hdmi_panel_uninit
<4>[  352.048675] [hdmi]suc_hdmi_gpio_off
<4>[  352.049285] [hdmi/tx]suspending=true, disable timer
<4>[  352.049530] [hdmi/tx]hdmi_panel_uninit
<4>[  352.049743] [hdmi/tx]hdmi_standby
<4>[  352.050109] [hdmi]hdmi_power(4)
<4>[  352.050323] [hdmi/lcdc]lcdc_disable_video, blank_count=0
<7>[  352.050598] __capella_cm3602_power: Turn the capella_cm3602 power off
<6>[  352.055999] atmel_ts_suspend: enter
<7>[  352.065734] mddi_novatec_power: power off.
<6>[  352.187286] [R] early_suspend: sync
<6>[  352.292358] [R] early_suspend end
<6>[  355.262908] gpio_keys_scan_keys: key 1-73, 1 (41) changed to 1
<6>[  355.447265] gpio_keys_scan_keys: key 1-73, 1 (41) changed to 0
<6>[  357.421722] msmfb: pan_update in state(4)
<6>[  357.421752] msmfb: drawing while asleep
<6>[  357.578125] msmfb: pan_update in state(4)
<6>[  357.578155] msmfb: drawing while asleep
<6>[  357.845428] gpio_keys_scan_keys: key 1-74, 0 (94) changed to 1
<6>[  357.904296] msmfb: pan_update in state(4)
<6>[  357.904296] msmfb: drawing while asleep
<6>[  357.993255] lightsensor_ioctl set value = 1
<6>[  357.993286] lightsensor_enable
<3>[  357.993286] lightsensor_enable: microp is suspended
<6>[  358.021270] gpio_keys_scan_keys: key 1-74, 0 (94) continue debounce
<6>[  358.027160] __spi_bma150_set_mode: BMA get into NORMAL mode!
<6>[  358.041564] gpio_keys_scan_keys: key 1-74, 0 (94) continue debounce
<6>[  358.061920] gpio_keys_scan_keys: key 1-74, 0 (94) changed to 0
<6>[  358.102294] request_suspend_state: wakeup (3->0) at 355165647587 (2014-06-25 10:48:07.154226113 UTC)
<6>[  358.102813] [R] late_resume start
<6>[  358.121307] msmfb: pan_update in state(4)
<6>[  358.121337] msmfb: drawing while asleep
<6>[  358.196777] mddi_wait_interrupt 10, timeout waiting for 4000, INT = 10, STAT = 10 gotint = 2a004
<6>[  358.218536] msmfb: pan_update in state(4)
<6>[  358.218566] msmfb: drawing while asleep
<6>[  358.296783] mddi_wait_interrupt 10, timeout waiting for 20000, INT = 10, STAT = 10 gotint = a004
<7>[  358.296783] mddi_novatec_power: power on.
<6>[  358.318847] msmfb: pan_update in state(4)
<6>[  358.318847] msmfb: drawing while asleep
<6>[  358.556793] msmfb: ready, waiting for full update
<6>[  358.593872] msmfb: pan_update in state(1)
<6>[  358.593872] msmfb: full update starting
<7>[  358.619689] __capella_cm3602_power: Turn the capella_cm3602 power on
<4>[  358.620086] [hdmi/fb]hdmifb_resume
<4>[  358.620269] [hdmi/lcdc]lcdc_resume
<4>[  358.620422] [hdmi/tx]hdmi_panel_init
<4>[  358.620666] [hdmi]suc_hdmi_gpio_on
<4>[  358.621154] [hdmi]hdmi_power(5)
<6>[  358.621368] [R] late_resume end
<6>[  358.628356] msmfb: full update completed
<6>[  358.628692] msmfb: turning on panel
<7>[  358.628845] supersonic_panel_unblank
<7>[  358.629028] turn on backlight
<7>[  358.629302] set brightness = 100
<6>[  358.636199] msmfb: pan_update in state(3)
<7>[  358.919952] set brightness = 164
<7>[  359.477355] ALS value: 0x5, level: 1 #
<7>[  359.597320] ALS value: 0x5, level: 1 #
<6>[  361.236419] S1@500,789
<6>[  361.462005] S2@57,869
<6>[  361.492340] E1@953,786
<6>[  361.521484] E2@57,869
<7>[  378.627502] ALS value: 0x3, level: 0 #
<7>[  380.547454] ALS value: 0x5, level: 1 #
<7>[  381.507507] ALS value: 0x2, level: 0 #
<7>[  382.467376] ALS value: 0x4, level: 1 #
<7>[  414.572509] set brightness = 163
<7>[  414.589508] set brightness = 160
<7>[  414.605834] set brightness = 156
<7>[  414.622497] set brightness = 153
<7>[  414.639556] set brightness = 150
<7>[  414.655792] set brightness = 146
<7>[  414.672637] set brightness = 143
<7>[  414.689453] set brightness = 140
<7>[  414.711639] set brightness = 136
<7>[  414.722564] set brightness = 133
<7>[  414.739501] set brightness = 130
<7>[  414.755889] set brightness = 126
<7>[  414.772460] set brightness = 123
<7>[  414.790649] set brightness = 120
<7>[  414.805877] set brightness = 116
<7>[  414.822509] set brightness = 113
<7>[  414.839416] set brightness = 110
<7>[  414.857452] set brightness = 106
<7>[  414.872497] set brightness = 103
<7>[  414.889648] set brightness = 100
<7>[  414.905761] set brightness = 96
<7>[  414.922607] set brightness = 93
<7>[  414.939514] set brightness = 90
<7>[  414.955718] set brightness = 86
<7>[  414.972534] set brightness = 83
<7>[  414.990081] set brightness = 80
<7>[  415.005859] set brightness = 76
<7>[  415.022460] set brightness = 73
<7>[  415.039550] set brightness = 70
<7>[  415.055816] set brightness = 66
<7>[  415.072509] set brightness = 63
<7>[  415.089416] set brightness = 60
<7>[  415.105834] set brightness = 56
<7>[  415.122467] set brightness = 53
<7>[  415.139556] set brightness = 50
<7>[  415.155792] set brightness = 46
<7>[  415.172546] set brightness = 43
<7>[  415.189483] set brightness = 40
<7>[  415.206207] set brightness = 36
<7>[  415.222473] set brightness = 33
<7>[  415.239562] set brightness = 30
<7>[  415.255767] set brightness = 26
<7>[  415.272552] set brightness = 23
<7>[  415.297180] set brightness = 20
<7>[  415.308135] set brightness = 16
<7>[  415.323760] set brightness = 13
<7>[  415.340362] set brightness = 10
<6>[  421.566436] lightsensor_ioctl set value = 0
<6>[  421.567352] lightsensor_disable
<7>[  422.223968] set brightness = 0
<6>[  422.281921] request_suspend_state: sleep (0->3) at 419345274050 (2014-06-25 10:49:11.333852576 UTC)
<6>[  422.282562] [R] early_suspend start
<4>[  422.335205] dhd_set_suspend: force extra Suspend setting 
<4>[  422.354614] dhd_get_dtim_skip bcn_li_dtim=3 DTIM=3 Listen=10
<6>[  422.377319] __spi_bma150_set_mode: BMA get into SLEEP mode!
<7>[  422.377746] bma150_early_suspend: spi_bma150_set_mode returned = 0!
<7>[  422.395874] supersonic_panel_blank
<7>[  422.396240] set brightness = 0
<4>[  422.397094] [hdmi/fb]hdmifb_suspend, use_count=0
<4>[  422.397338] [hdmi/fb]hdmifb_suspend: hdmifb_suspending = true
<4>[  422.397705] [hdmi/lcdc]lcdc_suspend
<4>[  422.397918] [hdmi/tx]hdmi_panel_uninit
<4>[  422.398132] [hdmi]suc_hdmi_gpio_off
<4>[  422.398895] [hdmi/tx]suspending=true, disable timer
<4>[  422.399139] [hdmi/tx]hdmi_panel_uninit
<4>[  422.399505] [hdmi/tx]hdmi_standby
<4>[  422.399688] [hdmi]hdmi_power(4)
<4>[  422.399902] [hdmi/lcdc]lcdc_disable_video, blank_count=0
<7>[  422.400360] __capella_cm3602_power: Turn the capella_cm3602 power off
<6>[  422.405761] atmel_ts_suspend: enter
<7>[  422.418029] mddi_novatec_power: power off.
<6>[  422.467498] __spi_bma150_set_mode: BMA get into SLEEP mode!
<6>[  422.547576] [R] early_suspend: sync
<6>[  422.674407] [R] early_suspend end
<6>[  427.621765] msmfb: pan_update in state(4)
<6>[  427.621826] msmfb: drawing while asleep
<6>[  427.970947] msmfb: pan_update in state(4)
<6>[  427.970977] msmfb: drawing while asleep
<6>[  428.070953] msmfb: pan_update in state(4)
<6>[  428.070983] msmfb: drawing while asleep
<6>[  428.247436] msmfb: pan_update in state(4)
<6>[  428.247436] msmfb: drawing while asleep
<6>[  428.348388] msmfb: pan_update in state(4)
<6>[  428.348388] msmfb: drawing while asleep
<6>[  428.448120] msmfb: pan_update in state(4)
<6>[  428.448120] msmfb: drawing while asleep
<6>[  428.587554] msmfb: pan_update in state(4)
<6>[  428.587585] msmfb: drawing while asleep
<6>[  428.694671] msmfb: pan_update in state(4)
<6>[  428.694702] msmfb: drawing while asleep
<6>[  428.788085] msmfb: pan_update in state(4)
<6>[  428.788116] msmfb: drawing while asleep
<6>[  461.006286] gpio_keys_scan_keys: key 1-74, 0 (94) changed to 1
<6>[  461.026336] lightsensor_ioctl set value = 1
<6>[  461.027282] lightsensor_enable
<3>[  461.027709] lightsensor_enable: microp is suspended
<6>[  461.057312] __spi_bma150_set_mode: BMA get into NORMAL mode!
<6>[  461.087066] request_suspend_state: wakeup (3->0) at 458150388798 (2014-06-25 10:49:50.138967324 UTC)
<6>[  461.088043] [R] late_resume start
<6>[  461.139343] msmfb: pan_update in state(4)
<6>[  461.139404] msmfb: drawing while asleep
<6>[  461.154541] gpio_keys_scan_keys: key 1-74, 0 (94) changed to 0
<6>[  461.186828] mddi_wait_interrupt 503, timeout waiting for 4000, INT = 10, STAT = 10 gotint = 2a004
<6>[  461.257781] msmfb: pan_update in state(4)
<6>[  461.257843] msmfb: drawing while asleep
<6>[  461.286865] mddi_wait_interrupt 503, timeout waiting for 20000, INT = 10, STAT = 10 gotint = a004
<7>[  461.286926] mddi_novatec_power: power on.
<6>[  461.363830] msmfb: pan_update in state(4)
<6>[  461.363861] msmfb: drawing while asleep
<6>[  461.460815] msmfb: pan_update in state(4)
<6>[  461.460876] msmfb: drawing while asleep
<6>[  461.546783] msmfb: ready, waiting for full update
<6>[  461.551574] msmfb: pan_update in state(1)
<6>[  461.551605] msmfb: full update starting
<6>[  461.586120] msmfb: full update completed
<6>[  461.586914] msmfb: turning on panel
<7>[  461.587371] supersonic_panel_unblank
<7>[  461.587860] turn on backlight
<7>[  461.588287] set brightness = 100
<7>[  461.597015] __capella_cm3602_power: Turn the capella_cm3602 power on
<4>[  461.597991] [hdmi/fb]hdmifb_resume
<4>[  461.598419] [hdmi/lcdc]lcdc_resume
<4>[  461.598846] [hdmi/tx]hdmi_panel_init
<4>[  461.599609] [hdmi]suc_hdmi_gpio_on
<4>[  461.600738] [hdmi]hdmi_power(5)
<6>[  461.601379] [R] late_resume end
<6>[  461.626281] msmfb: pan_update in state(3)
<7>[  461.639038] set brightness = 132
<7>[  461.661010] set brightness = 135
<7>[  461.671264] set brightness = 138
<7>[  461.688079] set brightness = 142
<7>[  461.705963] set brightness = 145
<7>[  461.727142] set brightness = 148
<7>[  461.792114] set brightness = 162
<7>[  461.815277] set brightness = 164
<6>[  462.390075] S1@417,768
<7>[  462.457336] ALS value: 0x3, level: 0 #
<6>[  462.555175] E1@972,716
<7>[  462.577484] ALS value: 0x3, level: 0 #
<7>[  463.467498] ALS value: 0x2, level: 0 #
<7>[  464.427459] ALS value: 0x4, level: 1 #
<7>[  477.797454] ALS value: 0x2, level: 0 #
<7>[  482.597381] ALS value: 0x3, level: 0 #
<7>[  485.822509] set brightness = 163
<7>[  485.856048] set brightness = 162
<7>[  485.872497] set brightness = 161
<7>[  485.905792] set brightness = 160
<7>[  485.922424] set brightness = 159
<7>[  485.955871] set brightness = 158
<7>[  485.972625] set brightness = 157
<7>[  486.005859] set brightness = 156
<7>[  486.022521] set brightness = 155
<7>[  486.055755] set brightness = 154
<7>[  486.072601] set brightness = 153
<7>[  486.105834] set brightness = 152
<7>[  486.122528] set brightness = 151
<7>[  486.155792] set brightness = 150
<7>[  486.172607] set brightness = 149
<7>[  486.205841] set brightness = 148
<7>[  486.222595] set brightness = 147
<7>[  486.255767] set brightness = 146
<7>[  486.272552] set brightness = 145
<7>[  486.307312] set brightness = 144
<7>[  486.322692] set brightness = 143
<7>[  486.355865] set brightness = 142
<7>[  486.372528] set brightness = 141
<7>[  486.405792] set brightness = 140
<7>[  486.422515] set brightness = 139
<7>[  486.437469] ALS value: 0x2, level: 0 #
<7>[  486.455841] set brightness = 138
<7>[  486.472534] set brightness = 137
<7>[  486.505798] set brightness = 136
<7>[  486.522552] set brightness = 135
<7>[  486.555755] set brightness = 134
<7>[  486.572540] set brightness = 133
<7>[  486.605895] set brightness = 132
<7>[  486.622528] set brightness = 131
<7>[  486.655792] set brightness = 130
<7>[  486.672546] set brightness = 129
<7>[  486.705871] set brightness = 128
<7>[  486.722595] set brightness = 127
<7>[  486.755828] set brightness = 126
<7>[  486.772491] set brightness = 125
<7>[  486.805877] set brightness = 124
<7>[  486.822570] set brightness = 123
<7>[  486.855834] set brightness = 122
<7>[  486.872528] set brightness = 121
<7>[  486.907348] set brightness = 120
<7>[  486.922546] set brightness = 119
<7>[  486.955749] set brightness = 118
<7>[  486.975158] set brightness = 117
<7>[  487.005767] set brightness = 116
<7>[  487.022491] set brightness = 115
<7>[  487.055816] set brightness = 114
<7>[  487.072601] set brightness = 113
<7>[  487.105804] set brightness = 112
<7>[  487.122528] set brightness = 111
<7>[  487.155822] set brightness = 110
<7>[  487.172576] set brightness = 109
<7>[  487.206329] set brightness = 108
<7>[  487.222534] set brightness = 107
<7>[  487.257324] set brightness = 106
<7>[  487.273742] set brightness = 105
<7>[  487.307067] set brightness = 104
<7>[  487.323333] set brightness = 103
<6>[  487.738769] batt: M2A_RPC: level_update: 65 at 484802640995 (2014-06-25 10:50:16.790639687 UTC)
<6>[  487.740112] batt: batt:power_supply_changed: battery at 484803953251 (2014-06-25 10:50:16.792074013 UTC)
<6>[  487.743408] batt: SMEM_BATT: get_batt_info: batt_id=2, batt_vol=3972, batt_temp=347, batt_current=292, eval_current=0, level=65, charging_source=1, charging_enabled=1, full_bat=1500000, over_vchg=0 at 484808347782 (2014-06-25 10:50:16.795308876 UTC)
<6>[  487.747161] batt: SMEM_BATT: get_batt_info: batt_id=2, batt_vol=3972, batt_temp=347, batt_current=292, eval_current=0, level=65, charging_source=1, charging_enabled=1, full_bat=1500000, over_vchg=0 at 484816282352 (2014-06-25 10:50:16.799093056 UTC)
<6>[  487.759216] healthd: battery l=65 v=3 t=34.7 h=2 st=2 chg=u
<7>[  488.347351] ALS value: 0x3, level: 0 #
<7>[  497.821319] set brightness = 102
<7>[  497.868194] set brightness = 101
<7>[  497.876281] set brightness = 100
<7>[  497.938262] set brightness = 98
<7>[  497.961914] set brightness = 97
<7>[  497.980438] set brightness = 96
<7>[  498.004943] set brightness = 95
<7>[  498.021209] set brightness = 94
<7>[  498.054504] set brightness = 93
<7>[  498.071258] set brightness = 92
<7>[  498.104583] set brightness = 91
<7>[  498.121246] set brightness = 90
<7>[  498.154357] set brightness = 89
<7>[  498.827392] ALS value: 0x2, level: 0 #
<7>[  500.727386] ALS value: 0x3, level: 0 #
<7>[  516.957489] ALS value: 0x2, level: 0 #
<7>[  518.877532] ALS value: 0x3, level: 0 #
<3>[  524.973205] CFG80211-ERROR) wl_notify_connect_status : link down, calling cfg80211_disconnected with deauth_reason:0
<6>[  524.983856] cfg80211: Calling CRDA to update world regulatory domain
<4>[  525.842926] connect failed event=0 e->status 0x1
<3>[  525.843109] CFG80211-ERROR) wl_bss_connect_done : Report connect result - connection failed
<4>[  527.099853] connect failed event=0 e->status 0x1
<3>[  527.100372] CFG80211-ERROR) wl_bss_connect_done : Report connect result - connection failed
<4>[  527.442169] wds: 0020 @ 01
<6>[  527.442687] qmi: wds: got handle 0x01c20fc0
<4>[  527.443145] wds: 0022 @ ff
<6>[  527.443908] qmi: wds: CONNECTED
<4>[  527.445220] wds: 002d @ 01
<4>[  527.445678] qmi: got network profile
<6>[  527.448730] rmnet_open()
<4>[  528.857543] connect failed event=0 e->status 0x1
<3>[  528.858062] CFG80211-ERROR) wl_bss_connect_done : Report connect result - connection failed
<7>[  537.726684] rmnet0: no IPv6 routers present
<4>[  550.217773] connect failed event=0 e->status 0x1
<3>[  550.218627] CFG80211-ERROR) wl_bss_connect_done : Report connect result - connection failed
<4>[  576.565063] connect failed event=0 e->status 0x1
<3>[  576.565368] CFG80211-ERROR) wl_bss_connect_done : Report connect result - connection failed
<4>[  618.433227] wl_bss_connect_done succeeded
<6>[  618.476623] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
<4>[  618.492919] wl_bss_connect_done succeeded
<4>[  618.765777] Unknown PRIVATE command WLS_BATCHING GET - ignored
<4>[  618.769744] Unknown PRIVATE command WLS_BATCHING STOP - ignored
<4>[  620.072723] wds: 0021 @ 01
<6>[  620.073242] qmi: wds: network stopped
<4>[  620.073730] wds: 0022 @ ff
<6>[  620.074493] qmi: wds: DISCONNECTED
<6>[  620.075439] rmnet_stop()
<7>[  630.597442] ALS value: 0x2, level: 0 #
<7>[  655.447326] ALS value: 0x4, level: 1 #
<7>[  656.407440] ALS value: 0x2, level: 0 #
<7>[  659.472412] set brightness = 90
<7>[  659.505828] set brightness = 91
<7>[  659.535156] set brightness = 92
<7>[  659.556793] set brightness = 93
<7>[  659.593658] set brightness = 94
<7>[  659.615234] set brightness = 95
<7>[  659.685516] set brightness = 97
<7>[  659.718963] set brightness = 99
<7>[  659.777343] set brightness = 102
<7>[  659.817810] set brightness = 103
<7>[  659.849151] set brightness = 104
<7>[  659.869018] set brightness = 105
<7>[  659.885559] set brightness = 106
<7>[  659.904998] set brightness = 107
<7>[  659.926177] set brightness = 108
<7>[  679.472503] set brightness = 107
<7>[  679.505889] set brightness = 106
<7>[  679.522521] set brightness = 105
<7>[  679.557342] set brightness = 104
<7>[  679.572540] set brightness = 103
<7>[  679.607513] set brightness = 102
<7>[  679.622528] set brightness = 101
<7>[  679.655883] set brightness = 100
<7>[  679.672454] set brightness = 99
<7>[  679.705871] set brightness = 98
<7>[  679.722473] set brightness = 97
<7>[  679.755859] set brightness = 96
<7>[  679.772430] set brightness = 95
<7>[  679.805847] set brightness = 94
<7>[  679.822540] set brightness = 93
<7>[  679.855895] set brightness = 92
<7>[  679.872497] set brightness = 91
<7>[  679.905242] set brightness = 90
<7>[  689.797363] ALS value: 0x3, level: 0 #
<7>[  690.757354] ALS value: 0x2, level: 0 #
<7>[  695.488952] set brightness = 89
<6>[  697.738464] batt: M2A_RPC: level_update: 66 at 694802152712 (2014-06-25 10:53:46.790395544 UTC)
<6>[  697.738952] batt: batt:power_supply_changed: battery at 694802488405 (2014-06-25 10:53:46.790914343 UTC)
<6>[  697.740264] batt: SMEM_BATT: get_batt_info: batt_id=2, batt_vol=3965, batt_temp=350, batt_current=190, eval_current=0, level=66, charging_source=1, charging_enabled=1, full_bat=1500000, over_vchg=0 at 694804075319 (2014-06-25 10:53:46.792226599 UTC)
<6>[  697.741058] batt: SMEM_BATT: get_batt_info: batt_id=2, batt_vol=3965, batt_temp=350, batt_current=190, eval_current=0, level=66, charging_source=1, charging_enabled=1, full_bat=1500000, over_vchg=0 at 694830167850 (2014-06-25 10:53:46.793020056 UTC)
<6>[  697.767730] healthd: battery l=66 v=3 t=35.0 h=2 st=2 chg=u
<7>[  709.847412] ALS value: 0x4, level: 1 #
<7>[  711.767486] ALS value: 0x2, level: 0 #
<7>[  713.871215] set brightness = 90
<7>[  713.912384] set brightness = 91
<7>[  713.925109] set brightness = 92
<7>[  713.954528] set brightness = 93
<7>[  713.971374] set brightness = 94
<7>[  714.004699] set brightness = 95
<7>[  714.061676] set brightness = 97
<7>[  714.071472] set brightness = 98
<7>[  714.104644] set brightness = 99
<7>[  714.121398] set brightness = 100
<7>[  714.156005] set brightness = 101
<7>[  714.171813] set brightness = 102
<7>[  714.204437] set brightness = 103
<7>[  725.177490] ALS value: 0x4, level: 1 #
<7>[  729.206115] set brightness = 104
<7>[  729.222503] set brightness = 105
<7>[  729.255859] set brightness = 106
<7>[  729.272491] set brightness = 107
<7>[  729.305969] set brightness = 108
<7>[  729.322509] set brightness = 109
<7>[  729.355926] set brightness = 110
<7>[  729.372497] set brightness = 111
<7>[  729.407379] set brightness = 112
<7>[  729.422576] set brightness = 113
<7>[  729.455841] set brightness = 114
<7>[  729.472534] set brightness = 115
<7>[  729.540191] set brightness = 116
<7>[  729.548309] set brightness = 117
<7>[  729.555847] set brightness = 118
<7>[  729.571197] set brightness = 119
<7>[  729.604614] set brightness = 120
<7>[  729.621032] set brightness = 121
<7>[  729.654602] set brightness = 122
<7>[  729.671203] set brightness = 123
<7>[  729.715423] set brightness = 124
<7>[  729.725433] set brightness = 125
<7>[  729.754547] set brightness = 126
<7>[  729.771881] set brightness = 127
<7>[  729.804687] set brightness = 128
<7>[  729.864501] set brightness = 130
<7>[  729.907379] ALS value: 0x2, level: 0 #
<7>[  729.917663] set brightness = 132
<7>[  729.951995] set brightness = 133
<7>[  729.981842] set brightness = 135
<7>[  730.063049] set brightness = 138
<7>[  730.106964] set brightness = 140
<7>[  730.167419] set brightness = 142
<7>[  730.186248] set brightness = 143
<7>[  730.246398] set brightness = 145
<7>[  730.255798] set brightness = 146
<7>[  730.272460] set brightness = 147
<7>[  730.304595] set brightness = 148
<7>[  730.321258] set brightness = 149
<7>[  730.355072] set brightness = 150
<7>[  730.371582] set brightness = 151
<7>[  730.405181] set brightness = 152
<7>[  730.431579] set brightness = 153
<7>[  730.455413] set brightness = 154
<7>[  730.472991] set brightness = 155
<7>[  730.505004] set brightness = 156
<7>[  730.522094] set brightness = 157
<7>[  730.555267] set brightness = 158
<7>[  730.580780] set brightness = 159
<7>[  730.605560] set brightness = 160
<7>[  730.624145] set brightness = 161
<7>[  730.655395] set brightness = 162
<7>[  730.671936] set brightness = 163
<7>[  730.705047] set brightness = 164
<7>[  737.938110] set brightness = 163
<7>[  737.954589] set brightness = 162
<7>[  737.988525] set brightness = 161
<7>[  738.004577] set brightness = 160
<7>[  738.040008] set brightness = 159
<7>[  738.055847] set brightness = 158
<7>[  738.088012] set brightness = 157
<7>[  738.104858] set brightness = 156
<7>[  738.138031] set brightness = 155
<7>[  738.155273] set brightness = 154
<7>[  738.188934] set brightness = 153
<7>[  738.205871] set brightness = 152
<7>[  738.239471] set brightness = 151
<7>[  738.255859] set brightness = 150
<7>[  738.289489] set brightness = 149
<7>[  738.305847] set brightness = 148
<7>[  738.339416] set brightness = 147
<7>[  738.355895] set brightness = 146
<7>[  738.389434] set brightness = 145
<7>[  738.405853] set brightness = 144
<7>[  738.439514] set brightness = 143
<7>[  738.455841] set brightness = 142
<7>[  738.489471] set brightness = 141
<7>[  738.505889] set brightness = 140
<7>[  738.539489] set brightness = 139
<7>[  738.555938] set brightness = 138
<7>[  738.590637] set brightness = 137
<7>[  738.605895] set brightness = 136
<7>[  738.639373] set brightness = 135
<7>[  738.657409] set brightness = 134
<7>[  738.689605] set brightness = 133
<7>[  738.705841] set brightness = 132
<7>[  738.739410] set brightness = 131
<7>[  738.755859] set brightness = 130
<7>[  738.790069] set brightness = 129
<7>[  738.805908] set brightness = 128
<7>[  738.840759] set brightness = 127
<7>[  738.857299] set brightness = 126
<7>[  738.890289] set brightness = 125
<7>[  739.939941] set brightness = 124
<7>[  739.972351] set brightness = 123
<7>[  739.989227] set brightness = 122
<7>[  740.005493] set brightness = 121
<7>[  740.039978] set brightness = 120
<7>[  740.054595] set brightness = 119
<7>[  740.087829] set brightness = 118
<7>[  740.104614] set brightness = 117
<7>[  740.137817] set brightness = 116
<7>[  740.154602] set brightness = 115
<7>[  740.187805] set brightness = 114
<7>[  740.205047] set brightness = 113
<7>[  740.237945] set brightness = 112
<7>[  742.317474] ALS value: 0x4, level: 1 #
<7>[  746.339111] set brightness = 113
<7>[  746.372436] set brightness = 114
<7>[  746.389587] set brightness = 115
<7>[  746.422485] set brightness = 116
<7>[  746.440704] set brightness = 117
<7>[  746.472503] set brightness = 118
<7>[  746.489410] set brightness = 119
<7>[  746.522552] set brightness = 120
<7>[  746.539672] set brightness = 121
<7>[  746.572540] set brightness = 122
<7>[  746.589569] set brightness = 123
<7>[  746.622497] set brightness = 124
<7>[  746.640106] set brightness = 125
<7>[  746.672454] set brightness = 126
<7>[  746.689575] set brightness = 127
<7>[  746.722412] set brightness = 128
<7>[  746.739562] set brightness = 129
<7>[  746.772491] set brightness = 130
<7>[  746.789581] set brightness = 131
<7>[  746.822448] set brightness = 132
<7>[  746.839599] set brightness = 133
<7>[  746.872467] set brightness = 134
<7>[  746.923645] set brightness = 136
<7>[  746.940704] set brightness = 137
<7>[  746.971405] set brightness = 138
<7>[  746.987976] set brightness = 139
<7>[  747.021301] set brightness = 140
<7>[  747.040618] set brightness = 141
<7>[  747.084838] set brightness = 142
<7>[  747.099151] set brightness = 143
<7>[  747.117492] ALS value: 0x2, level: 0 #
<7>[  747.121185] set brightness = 144
<7>[  747.138061] set brightness = 145
<7>[  747.171264] set brightness = 146
<7>[  747.187896] set brightness = 147
<7>[  747.221191] set brightness = 148
<7>[  747.238250] set brightness = 149
<7>[  747.271209] set brightness = 150
<7>[  747.287902] set brightness = 151
<7>[  747.321350] set brightness = 152
<7>[  747.337890] set brightness = 153
<7>[  747.371246] set brightness = 154
<7>[  747.387908] set brightness = 155
<7>[  747.421203] set brightness = 156
<7>[  747.437896] set brightness = 157
<7>[  747.471221] set brightness = 158
<7>[  747.488006] set brightness = 159
<7>[  747.521209] set brightness = 160
<7>[  747.537872] set brightness = 161
<7>[  747.571197] set brightness = 162
<7>[  747.587921] set brightness = 163
<7>[  747.621398] set brightness = 164
<7>[  748.077453] ALS value: 0x3, level: 0 #
<7>[  749.042114] ALS value: 0x2, level: 0 #
<7>[  755.139160] set brightness = 163
<7>[  755.172454] set brightness = 162
<7>[  755.189575] set brightness = 161
<7>[  755.222503] set brightness = 160
<7>[  755.239562] set brightness = 159
<7>[  755.272491] set brightness = 158
<7>[  755.289550] set brightness = 157
<7>[  755.322540] set brightness = 156
<7>[  755.339202] set brightness = 155
<7>[  755.372467] set brightness = 154
<7>[  755.389587] set brightness = 153
<7>[  755.422515] set brightness = 152
<7>[  755.440521] set brightness = 151
<7>[  755.472473] set brightness = 150
<7>[  755.489562] set brightness = 149
<7>[  755.522583] set brightness = 148
<7>[  755.539703] set brightness = 147
<7>[  755.588012] set brightness = 146
<7>[  755.600311] set brightness = 145
<7>[  755.630340] set brightness = 144
<7>[  755.643737] set brightness = 143
<7>[  755.671325] set brightness = 142
<7>[  755.687927] set brightness = 141
<7>[  755.721038] set brightness = 140
<7>[  755.739440] set brightness = 139
<7>[  755.771575] set brightness = 138
<7>[  755.815246] set brightness = 137
<7>[  755.858978] set brightness = 135
<7>[  755.891448] set brightness = 133
<7>[  755.940643] set brightness = 131
<7>[  756.006927] set brightness = 129
<7>[  756.032379] set brightness = 128
<7>[  756.045654] set brightness = 127
<7>[  756.071289] set brightness = 126
<7>[  756.087951] set brightness = 125
<7>[  756.121398] set brightness = 124
<7>[  756.138061] set brightness = 123
<7>[  756.171264] set brightness = 122
<7>[  756.187652] set brightness = 121
<7>[  757.140777] set brightness = 120
<7>[  757.174682] set brightness = 119
<7>[  757.188323] set brightness = 118
<7>[  757.221557] set brightness = 117
<7>[  757.240234] set brightness = 116
<7>[  757.271484] set brightness = 115
<7>[  757.288116] set brightness = 114
<7>[  757.321472] set brightness = 113
<7>[  757.338684] set brightness = 112
<7>[  757.371582] set brightness = 111
<7>[  757.388519] set brightness = 110
<7>[  757.421447] set brightness = 109
<7>[  762.387420] ALS value: 0x3, level: 0 #
<7>[  763.347442] ALS value: 0x2, level: 0 #
<7>[  764.307434] ALS value: 0x4, level: 1 #
<7>[  766.227355] ALS value: 0x2, level: 0 #
<7>[  772.887359] ALS value: 0x4, level: 1 #
<7>[  776.905853] set brightness = 110
<7>[  776.939605] set brightness = 111
<7>[  776.958190] set brightness = 112
<7>[  776.989837] set brightness = 113
<7>[  777.005859] set brightness = 114
<7>[  777.039459] set brightness = 115
<7>[  777.055755] set brightness = 116
<7>[  777.091705] set brightness = 117
<7>[  777.106079] set brightness = 118
<7>[  777.139465] set brightness = 119
<7>[  777.155853] set brightness = 120
<7>[  777.189514] set brightness = 121
<7>[  777.206146] set brightness = 122
<7>[  777.239410] set brightness = 123
<7>[  777.255889] set brightness = 124
<7>[  777.289459] set brightness = 125
<7>[  777.305877] set brightness = 126
<7>[  777.339538] set brightness = 127
<7>[  777.355895] set brightness = 128
<7>[  777.389495] set brightness = 129
<7>[  777.405853] set brightness = 130
<7>[  777.439483] set brightness = 131
<7>[  777.455871] set brightness = 132
<7>[  777.490631] set brightness = 133
<7>[  777.505859] set brightness = 134
<7>[  777.539367] set brightness = 135
<7>[  777.557464] set brightness = 136
<7>[  777.589660] set brightness = 137
<7>[  777.606018] set brightness = 138
<7>[  777.639404] set brightness = 139
<7>[  777.655883] set brightness = 140
<7>[  777.689849] set brightness = 141
<7>[  777.705841] set brightness = 142
<7>[  777.739501] set brightness = 143
<7>[  777.755889] set brightness = 144
<7>[  777.789489] set brightness = 145
<7>[  777.805847] set brightness = 146
<7>[  777.840362] set brightness = 147
<7>[  777.855957] set brightness = 148
<7>[  777.889404] set brightness = 149
<7>[  777.905853] set brightness = 150
<7>[  777.948852] set brightness = 151
<7>[  777.962768] set brightness = 152
<7>[  777.990539] set brightness = 153
<7>[  778.007293] set brightness = 154
<7>[  778.042938] set brightness = 155
<7>[  778.061065] set brightness = 156
<7>[  778.090576] set brightness = 157
<7>[  778.105865] set brightness = 158
<7>[  778.139434] set brightness = 159
<7>[  778.157409] set brightness = 160
<7>[  778.189636] set brightness = 161
<7>[  778.205963] set brightness = 162
<7>[  778.239410] set brightness = 163
<7>[  778.255310] set brightness = 164
<4>[  810.355224] msmfb_start_dma 20.629 ms after vsync request
<7>[  869.172485] set brightness = 162
<7>[  869.189636] set brightness = 158
<7>[  869.205871] set brightness = 155
<7>[  869.222595] set brightness = 152
<7>[  869.239440] set brightness = 148
<7>[  869.255859] set brightness = 145
<7>[  869.272491] set brightness = 142
<7>[  869.289550] set brightness = 138
<7>[  869.305816] set brightness = 135
<7>[  869.322631] set brightness = 132
<7>[  869.339447] set brightness = 128
<7>[  869.355834] set brightness = 125
<7>[  869.372497] set brightness = 122
<7>[  869.389526] set brightness = 118
<7>[  869.405883] set brightness = 115
<7>[  869.422607] set brightness = 112
<7>[  869.440551] set brightness = 108
<7>[  869.455963] set brightness = 105
<7>[  869.472442] set brightness = 102
<7>[  869.489562] set brightness = 98
<7>[  869.507415] set brightness = 95
<7>[  869.522552] set brightness = 92
<7>[  869.539581] set brightness = 88
<7>[  869.556030] set brightness = 85
<7>[  869.573852] set brightness = 82
<7>[  869.589508] set brightness = 78
<7>[  869.605834] set brightness = 75
<7>[  869.622497] set brightness = 72
<7>[  869.639556] set brightness = 68
<7>[  869.655822] set brightness = 65
<7>[  869.672515] set brightness = 62
<7>[  869.689483] set brightness = 58
<7>[  869.705841] set brightness = 55
<7>[  869.722503] set brightness = 52
<7>[  869.739562] set brightness = 48
<7>[  869.755767] set brightness = 45
<7>[  869.772583] set brightness = 42
<7>[  869.789428] set brightness = 38
<7>[  869.805908] set brightness = 35
<7>[  869.822448] set brightness = 32
<7>[  869.839569] set brightness = 28
<7>[  869.855773] set brightness = 25
<7>[  869.872558] set brightness = 22
<7>[  869.889434] set brightness = 18
<7>[  869.905914] set brightness = 15
<7>[  869.922485] set brightness = 12
<7>[  869.939025] set brightness = 10
<6>[  876.157989] lightsensor_ioctl set value = 0
<6>[  876.158813] lightsensor_disable
<7>[  876.830749] set brightness = 0
<6>[  876.889129] request_suspend_state: sleep (0->3) at 873952482304 (2014-06-25 10:56:45.941030312 UTC)
<6>[  876.889190] [R] early_suspend start
<4>[  876.935791] dhd_set_suspend: force extra Suspend setting 
<4>[  876.953063] dhd_get_dtim_skip bcn_li_dtim=3 DTIM=3 Listen=10
<6>[  876.987335] __spi_bma150_set_mode: BMA get into SLEEP mode!
<7>[  876.987762] bma150_early_suspend: spi_bma150_set_mode returned = 0!
<7>[  877.005889] supersonic_panel_blank
<7>[  877.006256] set brightness = 0
<4>[  877.007141] [hdmi/fb]hdmifb_suspend, use_count=0
<4>[  877.007385] [hdmi/fb]hdmifb_suspend: hdmifb_suspending = true
<4>[  877.007751] [hdmi/lcdc]lcdc_suspend
<4>[  877.007965] [hdmi/tx]hdmi_panel_uninit
<4>[  877.008178] [hdmi]suc_hdmi_gpio_off
<4>[  877.008911] [hdmi/tx]suspending=true, disable timer
<4>[  877.009155] [hdmi/tx]hdmi_panel_uninit
<4>[  877.009368] [hdmi/tx]hdmi_standby
<4>[  877.009704] [hdmi]hdmi_power(4)
<4>[  877.009918] [hdmi/lcdc]lcdc_disable_video, blank_count=0
<7>[  877.010375] __capella_cm3602_power: Turn the capella_cm3602 power off
<6>[  877.015777] atmel_ts_suspend: enter
<7>[  877.026550] mddi_novatec_power: power off.
<6>[  877.077453] __spi_bma150_set_mode: BMA get into SLEEP mode!
<6>[  877.157531] [R] early_suspend: sync
<6>[  877.237976] [R] early_suspend end
<6>[  877.738708] batt: M2A_RPC: level_update: 67 at 874802335819 (2014-06-25 10:56:46.790639687 UTC)
<6>[  877.739379] batt: batt:power_supply_changed: battery at 874802976688 (2014-06-25 10:56:46.791341591 UTC)
<6>[  877.740783] batt: M2A_RPC: set_charging: 100 at 874804563602 (2014-06-25 10:56:46.792745400 UTC)
<6>[  877.741394] TPS65200 Switch charger set control100
<6>[  877.741790] Switch charger CHECK 
<6>[  877.742736] batt: SMEM_BATT: get_batt_info: batt_id=2, batt_vol=3997, batt_temp=347, batt_current=332, eval_current=0, level=67, charging_source=1, charging_enabled=1, full_bat=1500000, over_vchg=0 at 874810484012 (2014-06-25 10:56:46.794668007 UTC)
<6>[  877.751434] TPS65200 STATUS_A26, INT2:0
<6>[  877.755462] batt: SMEM_BATT: get_batt_info: batt_id=2, batt_vol=3997, batt_temp=347, batt_current=332, eval_current=0, level=67, charging_source=1, charging_enabled=1, full_bat=1500000, over_vchg=0 at 874840452274 (2014-06-25 10:56:46.807363319 UTC)
<6>[  877.778198] healthd: battery l=67 v=3 t=34.7 h=2 st=2 chg=u
<6>[  882.754180] msmfb: pan_update in state(4)
<6>[  882.754211] msmfb: drawing while asleep
<6>[  882.848632] msmfb: pan_update in state(4)
<6>[  882.848663] msmfb: drawing while asleep
<6>[  882.948211] msmfb: pan_update in state(4)
<6>[  882.948242] msmfb: drawing while asleep
<6>[  968.799560] gpio_keys_scan_keys: key 1-73, 1 (41) changed to 1
<6>[  969.038909] gpio_keys_scan_keys: key 1-73, 1 (41) changed to 0
<6>[  969.701690] gpio_keys_scan_keys: key 1-74, 0 (94) changed to 1
<6>[  969.721954] lightsensor_ioctl set value = 1
<6>[  969.722778] lightsensor_enable
<3>[  969.723205] lightsensor_enable: microp is suspended
<6>[  969.747283] __spi_bma150_set_mode: BMA get into NORMAL mode!
<6>[  969.777099] request_suspend_state: wakeup (3->0) at 966840421757 (2014-06-25 10:58:18.829000283 UTC)
<6>[  969.778076] [R] late_resume start
<6>[  969.876831] mddi_wait_interrupt 4, timeout waiting for 4000, INT = 10, STAT = 10 gotint = 2a004
<6>[  969.883666] gpio_keys_scan_keys: key 1-74, 0 (94) continue debounce
<6>[  969.889160] msmfb: pan_update in state(4)
<6>[  969.889190] msmfb: drawing while asleep
<6>[  969.904235] gpio_keys_scan_keys: key 1-74, 0 (94) continue debounce
<6>[  969.924346] gpio_keys_scan_keys: key 1-74, 0 (94) changed to 0
<6>[  969.976776] mddi_wait_interrupt 4, timeout waiting for 20000, INT = 10, STAT = 10 gotint = a004
<7>[  969.976837] mddi_novatec_power: power on.
<6>[  969.998535] msmfb: pan_update in state(4)
<6>[  969.998565] msmfb: drawing while asleep
<6>[  970.112213] msmfb: pan_update in state(4)
<6>[  970.112274] msmfb: drawing while asleep
<6>[  970.236846] msmfb: ready, waiting for full update
<6>[  970.240447] msmfb: pan_update in state(1)
<6>[  970.240478] msmfb: full update starting
<6>[  970.275024] msmfb: full update completed
<6>[  970.276031] msmfb: turning on panel
<7>[  970.276519] supersonic_panel_unblank
<7>[  970.277923] turn on backlight
<7>[  970.278411] set brightness = 100
<7>[  970.279937] __capella_cm3602_power: Turn the capella_cm3602 power on
<4>[  970.280914] [hdmi/fb]hdmifb_resume
<4>[  970.281402] [hdmi/lcdc]lcdc_resume
<4>[  970.281829] [hdmi/tx]hdmi_panel_init
<4>[  970.282592] [hdmi]suc_hdmi_gpio_on
<4>[  970.283691] [hdmi]hdmi_power(5)
<6>[  970.290374] [R] late_resume end
<7>[  970.401336] set brightness = 132
<7>[  970.442199] set brightness = 152
<7>[  970.517639] set brightness = 164
<7>[  971.137359] ALS value: 0x3, level: 0 #
<6>[  971.180267] S1@559,765
<7>[  971.257354] ALS value: 0x3, level: 0 #
<6>[  971.407257] E1@962,786
<7>[  981.172515] set brightness = 163
<7>[  981.189636] set brightness = 162
<7>[  981.222442] set brightness = 161
<7>[  981.239196] set brightness = 160
<7>[  981.272521] set brightness = 159
<7>[  981.289550] set brightness = 158
<7>[  981.322509] set brightness = 157
<7>[  981.339569] set brightness = 156
<7>[  981.372467] set brightness = 155
<7>[  981.389556] set brightness = 154
<7>[  981.422485] set brightness = 153
<7>[  981.439788] set brightness = 152
<7>[  981.472473] set brightness = 151
<7>[  981.489532] set brightness = 150
<7>[  981.522552] set brightness = 149
<7>[  981.540649] set brightness = 148
<7>[  981.572479] set brightness = 147
<7>[  981.589202] set brightness = 146
<7>[  981.622589] set brightness = 145
<7>[  981.639678] set brightness = 144
<7>[  981.672546] set brightness = 143
<7>[  981.689636] set brightness = 142
<7>[  981.722503] set brightness = 141
<7>[  981.739807] set brightness = 140
<7>[  981.772460] set brightness = 139
<7>[  981.789550] set brightness = 138
<7>[  981.823577] set brightness = 137
<7>[  981.839080] set brightness = 136
<7>[  983.172515] set brightness = 135
<7>[  983.189544] set brightness = 134
<7>[  983.222656] set brightness = 133
<7>[  983.239715] set brightness = 132
<7>[  983.272521] set brightness = 131
<7>[  983.289489] set brightness = 130
<7>[  983.322540] set brightness = 129
<7>[  983.339904] set brightness = 128
<7>[  983.372528] set brightness = 127
<7>[  983.389495] set brightness = 126
<7>[  983.422576] set brightness = 125
<7>[  983.439147] set brightness = 124
<7>[  985.171875] set brightness = 123
<7>[  985.189117] set brightness = 122
<7>[  985.222534] set brightness = 121
<7>[  985.239624] set brightness = 120
<7>[  985.272613] set brightness = 119
<7>[  985.289520] set brightness = 118
<7>[  985.322509] set brightness = 117
<7>[  985.339904] set brightness = 116
<7>[  985.372497] set brightness = 115
<7>[  985.389526] set brightness = 114
<7>[  985.422851] set brightness = 113
<7>[  985.438964] set brightness = 112
<7>[  997.173614] set brightness = 111
<7>[  997.189178] set brightness = 110
<7>[  997.222564] set brightness = 109
<7>[  997.239532] set brightness = 108
<7>[  997.272583] set brightness = 107
<7>[  997.289550] set brightness = 106
<7>[  997.322509] set brightness = 105
<7>[  997.339508] set brightness = 104
<7>[  997.372528] set brightness = 103
<7>[  997.390625] set brightness = 102
<7>[  997.422515] set brightness = 101
<7>[  997.439544] set brightness = 100
<7>[  997.472564] set brightness = 99
<7>[  997.489654] set brightness = 98
<7>[  997.522583] set brightness = 97
<7>[  997.539550] set brightness = 96
<7>[  997.572509] set brightness = 95
<7>[  997.589782] set brightness = 94
<7>[  997.622528] set brightness = 93
<7>[  997.639495] set brightness = 92
<7>[  997.672546] set brightness = 91
<7>[  997.696624] set brightness = 90
<7>[ 1013.171936] set brightness = 89
<7>[ 1024.439117] set brightness = 87
<7>[ 1024.455871] set brightness = 84
<7>[ 1024.472442] set brightness = 80
<7>[ 1024.489898] set brightness = 77
<7>[ 1024.505767] set brightness = 74
<7>[ 1024.522521] set brightness = 70
<7>[ 1024.539459] set brightness = 67
<7>[ 1024.555908] set brightness = 64
<7>[ 1024.572448] set brightness = 60
<7>[ 1024.589263] set brightness = 57
<7>[ 1024.605773] set brightness = 54
<7>[ 1024.622528] set brightness = 50
<7>[ 1024.639282] set brightness = 47
<7>[ 1024.655883] set brightness = 44
<7>[ 1024.672485] set brightness = 40
<7>[ 1024.689605] set brightness = 37
<7>[ 1024.705718] set brightness = 34
<7>[ 1024.722503] set brightness = 30
<7>[ 1024.739349] set brightness = 27
<7>[ 1024.755798] set brightness = 24
<7>[ 1024.772552] set brightness = 20
<7>[ 1024.789459] set brightness = 17
<7>[ 1024.805938] set brightness = 14
<7>[ 1024.821960] set brightness = 10
<6>[ 1027.738861] batt: M2A_RPC: level_update: 68 at 1024802702031 (2014-06-25 10:59:16.790792276 UTC)
<6>[ 1027.740173] batt: batt:power_supply_changed: battery at 1024804014287 (2014-06-25 10:59:16.792135049 UTC)
<6>[ 1027.743774] batt: SMEM_BATT: get_batt_info: batt_id=2, batt_vol=4014, batt_temp=340, batt_current=376, eval_current=0, level=68, charging_source=1, charging_enabled=1, full_bat=1500000, over_vchg=0 at 1024808164677 (2014-06-25 10:59:16.795675088 UTC)
<6>[ 1027.745910] batt: SMEM_BATT: get_batt_info: batt_id=2, batt_vol=4014, batt_temp=340, batt_current=376, eval_current=0, level=68, charging_source=1, charging_enabled=1, full_bat=1500000, over_vchg=0 at 1024816831669 (2014-06-25 10:59:16.797811319 UTC)
<6>[ 1027.759643] healthd: battery l=68 v=4 t=34.0 h=2 st=2 chg=u
<6>[ 1031.422973] lightsensor_ioctl set value = 0
<6>[ 1031.423431] lightsensor_disable
<7>[ 1032.103729] set brightness = 0
<4>[ 1032.154846] dhd_set_suspend: force extra Suspend setting 
<4>[ 1032.172515] dhd_get_dtim_skip bcn_li_dtim=3 DTIM=3 Listen=10
<6>[ 1032.207489] request_suspend_state: sleep (0->3) at 1029270841679 (2014-06-25 10:59:21.259420205 UTC)
<6>[ 1032.207977] [R] early_suspend start
<6>[ 1032.257171] __spi_bma150_set_mode: BMA get into SLEEP mode!
<6>[ 1032.337860] __spi_bma150_set_mode: BMA get into SLEEP mode!
<7>[ 1032.338134] bma150_early_suspend: spi_bma150_set_mode returned = 0!
<7>[ 1032.356475] supersonic_panel_blank
<7>[ 1032.356811] set brightness = 0
<4>[ 1032.357666] [hdmi/fb]hdmifb_suspend, use_count=0
<4>[ 1032.358123] [hdmi/fb]hdmifb_suspend: hdmifb_suspending = true
<4>[ 1032.358398] [hdmi/lcdc]lcdc_suspend
<4>[ 1032.358642] [hdmi/tx]hdmi_panel_uninit
<4>[ 1032.359039] [hdmi]suc_hdmi_gpio_off
<4>[ 1032.359710] [hdmi/tx]suspending=true, disable timer
<4>[ 1032.359954] [hdmi/tx]hdmi_panel_uninit
<4>[ 1032.360351] [hdmi/tx]hdmi_standby
<4>[ 1032.360626] [hdmi]hdmi_power(4)
<4>[ 1032.360839] [hdmi/lcdc]lcdc_disable_video, blank_count=0
<7>[ 1032.361328] __capella_cm3602_power: Turn the capella_cm3602 power off
<6>[ 1032.366394] atmel_ts_suspend: enter
<7>[ 1032.372558] mddi_novatec_power: power off.
<6>[ 1032.497192] [R] early_suspend: sync
<6>[ 1032.543792] [R] early_suspend end
<6>[ 1037.654296] msmfb: pan_update in state(4)
<6>[ 1037.654327] msmfb: drawing while asleep
<6>[ 1037.748626] msmfb: pan_update in state(4)
<6>[ 1037.748626] msmfb: drawing while asleep
<6>[ 1037.848266] msmfb: pan_update in state(4)
<6>[ 1037.848297] msmfb: drawing while asleep
<6>[ 1147.738769] batt: M2A_RPC: level_update: 69 at 1144802640995 (2014-06-25 11:01:16.790700723 UTC)
<6>[ 1147.739776] batt: batt:power_supply_changed: battery at 1144803953251 (2014-06-25 11:01:16.791738320 UTC)
<6>[ 1147.743499] batt: SMEM_BATT: get_batt_info: batt_id=2, batt_vol=4026, batt_temp=337, batt_current=408, eval_current=0, level=69, charging_source=1, charging_enabled=1, full_bat=1500000, over_vchg=0 at 1144808286747 (2014-06-25 11:01:16.795400429 UTC)
<6>[ 1147.746063] batt: SMEM_BATT: get_batt_info: batt_id=2, batt_vol=4026, batt_temp=337, batt_current=408, eval_current=0, level=69, charging_source=1, charging_enabled=1, full_bat=1500000, over_vchg=0 at 1144816984257 (2014-06-25 11:01:16.797994423 UTC)
<6>[ 1147.759094] healthd: battery l=69 v=4 t=33.7 h=2 st=2 chg=u
<6>[ 1167.892822] gpio_keys_scan_keys: key 1-74, 0 (94) changed to 1
<6>[ 1167.912658] lightsensor_ioctl set value = 1
<6>[ 1167.913482] lightsensor_enable
<3>[ 1167.913940] lightsensor_enable: microp is suspended
<6>[ 1167.947326] __spi_bma150_set_mode: BMA get into NORMAL mode!
<6>[ 1167.986236] request_suspend_state: wakeup (3->0) at 1165049558720 (2014-06-25 11:01:37.038106728 UTC)
<6>[ 1167.987304] [R] late_resume start
<6>[ 1168.025695] msmfb: pan_update in state(4)
<6>[ 1168.025726] msmfb: drawing while asleep
<6>[ 1168.085510] gpio_keys_scan_keys: key 1-74, 0 (94) continue debounce
<6>[ 1168.086791] mddi_wait_interrupt 503, timeout waiting for 4000, INT = 10, STAT = 10 gotint = 2a004
<6>[ 1168.105621] gpio_keys_scan_keys: key 1-74, 0 (94) continue debounce
<6>[ 1168.125732] gpio_keys_scan_keys: key 1-74, 0 (94) changed to 0
<6>[ 1168.137115] msmfb: pan_update in state(4)
<6>[ 1168.137145] msmfb: drawing while asleep
<6>[ 1168.186828] mddi_wait_interrupt 503, timeout waiting for 20000, INT = 10, STAT = 10 gotint = a004
<7>[ 1168.186889] mddi_novatec_power: power on.
<6>[ 1168.242828] msmfb: pan_update in state(4)
<6>[ 1168.242858] msmfb: drawing while asleep
<6>[ 1168.340728] msmfb: pan_update in state(4)
<6>[ 1168.340759] msmfb: drawing while asleep
<6>[ 1168.439849] msmfb: pan_update in state(4)
<6>[ 1168.439880] msmfb: drawing while asleep
<6>[ 1168.446868] msmfb: ready, waiting for full update
<6>[ 1168.462249] msmfb: pan_update in state(1)
<6>[ 1168.462310] msmfb: full update starting
<7>[ 1168.465850] set brightness = 89
<7>[ 1168.488433] __capella_cm3602_power: Turn the capella_cm3602 power on
<4>[ 1168.489379] [hdmi/fb]hdmifb_resume
<4>[ 1168.489807] [hdmi/lcdc]lcdc_resume
<4>[ 1168.490631] [hdmi/tx]hdmi_panel_init
<4>[ 1168.491058] [hdmi]suc_hdmi_gpio_on
<4>[ 1168.492187] [hdmi]hdmi_power(5)
<6>[ 1168.492828] [R] late_resume end
<6>[ 1168.494567] msmfb: pan_update in state(3)
<6>[ 1168.496765] msmfb: full update completed
<6>[ 1168.497100] msmfb: turning on panel
<7>[ 1168.497131] supersonic_panel_unblank
<7>[ 1168.497192] turn on backlight
<7>[ 1168.497222] set brightness = 89
<6>[ 1169.290771] S1@488,788
<7>[ 1169.347717] ALS value: 0x4, level: 1 #
<6>[ 1169.455322] E1@902,769
<7>[ 1169.467376] ALS value: 0x4, level: 1 #
<7>[ 1173.383056] set brightness = 90
<7>[ 1173.395416] set brightness = 91
<7>[ 1173.421813] set brightness = 92
<7>[ 1173.438262] set brightness = 93
<7>[ 1173.473022] set brightness = 94
<7>[ 1173.489624] set brightness = 95
<7>[ 1173.521392] set brightness = 96
<7>[ 1173.546142] set brightness = 97
<7>[ 1173.571197] set brightness = 98
<7>[ 1173.596130] set brightness = 99
<7>[ 1173.621551] set brightness = 100
<7>[ 1173.639739] set brightness = 101
<7>[ 1173.671234] set brightness = 102
<7>[ 1173.689605] set brightness = 103
<7>[ 1173.722961] set brightness = 104
<7>[ 1173.750488] set brightness = 105
<7>[ 1173.782073] set brightness = 106
<7>[ 1173.790710] set brightness = 107
<7>[ 1173.829742] set brightness = 108
<7>[ 1173.866607] set brightness = 109
<7>[ 1173.886779] set brightness = 110
<7>[ 1173.895385] set brightness = 111
<7>[ 1173.921386] set brightness = 112
<7>[ 1173.945068] set brightness = 113
<7>[ 1173.971374] set brightness = 114
<7>[ 1174.002929] set brightness = 115
<7>[ 1174.039916] set brightness = 117
<7>[ 1174.079833] set brightness = 118
<7>[ 1174.131958] set brightness = 120
<7>[ 1174.149200] set brightness = 121
<7>[ 1174.171691] set brightness = 122
<7>[ 1174.191497] set brightness = 123
<7>[ 1174.232574] set brightness = 124
<7>[ 1174.251800] set brightness = 125
<7>[ 1174.271301] set brightness = 126
<7>[ 1174.289642] set brightness = 127
<7>[ 1174.328247] set brightness = 128
<7>[ 1174.337951] set brightness = 129
<7>[ 1174.381195] set brightness = 130
<7>[ 1174.487915] set brightness = 135
<7>[ 1174.521697] set brightness = 136
<7>[ 1174.539428] set brightness = 137
<7>[ 1174.571258] set brightness = 138
<7>[ 1174.588653] set brightness = 139
<7>[ 1174.621734] set brightness = 140
<7>[ 1174.638427] set brightness = 141
<7>[ 1174.672515] set brightness = 142
<7>[ 1174.689697] set brightness = 143
<7>[ 1174.722747] set brightness = 144
<7>[ 1174.745452] set brightness = 145
<7>[ 1174.780364] set brightness = 146
<7>[ 1174.788574] set brightness = 147
<7>[ 1174.821197] set brightness = 148
<7>[ 1174.837982] set brightness = 149
<7>[ 1174.871307] set brightness = 150
<7>[ 1174.888000] set brightness = 151
<7>[ 1174.921569] set brightness = 152
<7>[ 1174.938079] set brightness = 153
<7>[ 1174.971313] set brightness = 154
<7>[ 1174.989166] set brightness = 155
<7>[ 1175.021545] set brightness = 156
<7>[ 1175.038146] set brightness = 157
<7>[ 1175.071838] set brightness = 158
<7>[ 1175.088531] set brightness = 159
<7>[ 1175.122467] set brightness = 160
<7>[ 1175.139556] set brightness = 161
<7>[ 1175.172515] set brightness = 162
<7>[ 1175.191009] set brightness = 163
<7>[ 1175.221984] set brightness = 164
<7>[ 1187.607513] ALS value: 0x9, level: 2 #
<7>[ 1188.527465] ALS value: 0x3, level: 0 #
<7>[ 1198.554809] set brightness = 163
<7>[ 1198.571441] set brightness = 162
<7>[ 1198.604614] set brightness = 161
<7>[ 1198.621276] set brightness = 160
<7>[ 1198.654663] set brightness = 159
<7>[ 1198.671386] set brightness = 158
<7>[ 1198.734008] set brightness = 156
<7>[ 1198.754547] set brightness = 155
<7>[ 1198.771240] set brightness = 154
<7>[ 1198.804595] set brightness = 153
<7>[ 1198.821380] set brightness = 152
<7>[ 1198.854339] set brightness = 151
<7>[ 1198.871215] set brightness = 150
<7>[ 1198.904571] set brightness = 149
<7>[ 1198.921234] set brightness = 148
<7>[ 1198.956512] set brightness = 147
<7>[ 1198.971862] set brightness = 146
<7>[ 1199.005859] set brightness = 145
<7>[ 1199.022491] set brightness = 144
<7>[ 1199.055847] set brightness = 143
<7>[ 1199.073669] set brightness = 142
<7>[ 1199.109130] set brightness = 141
<7>[ 1199.148437] set brightness = 140
<7>[ 1199.164489] set brightness = 139
<7>[ 1199.173400] set brightness = 138
<7>[ 1199.204864] set brightness = 137
<7>[ 1199.221313] set brightness = 136
<7>[ 1199.254669] set brightness = 135
<7>[ 1199.271911] set brightness = 134
<7>[ 1199.304595] set brightness = 133
<7>[ 1199.325653] set brightness = 132
<7>[ 1199.357482] set brightness = 131
<7>[ 1199.371276] set brightness = 130
<7>[ 1199.404418] set brightness = 129
<7>[ 1200.555908] set brightness = 128
<7>[ 1200.572479] set brightness = 127
<7>[ 1200.605834] set brightness = 126
<7>[ 1200.622497] set brightness = 125
<7>[ 1200.655883] set brightness = 124
<7>[ 1200.672424] set brightness = 123
<7>[ 1200.705871] set brightness = 122
<7>[ 1200.722534] set brightness = 121
<7>[ 1200.757415] set brightness = 120
<7>[ 1200.772552] set brightness = 119
<7>[ 1200.805847] set brightness = 118
<7>[ 1200.821960] set brightness = 117
<7>[ 1202.555969] set brightness = 116
<7>[ 1202.577239] set brightness = 115
<7>[ 1202.605346] set brightness = 114
<7>[ 1202.621643] set brightness = 113
<7>[ 1202.655059] set brightness = 112
<7>[ 1202.671905] set brightness = 111
<7>[ 1202.705078] set brightness = 110
<7>[ 1202.721740] set brightness = 109
<7>[ 1202.754943] set brightness = 108
<7>[ 1202.771209] set brightness = 107
<7>[ 1202.804504] set brightness = 106
<7>[ 1214.554809] set brightness = 105
<7>[ 1214.588439] set brightness = 104
<7>[ 1214.605163] set brightness = 103
<7>[ 1214.644470] set brightness = 102
<7>[ 1214.654602] set brightness = 101
<7>[ 1214.688659] set brightness = 100
<7>[ 1214.704956] set brightness = 99
<7>[ 1214.742340] set brightness = 98
<7>[ 1214.754821] set brightness = 97
<7>[ 1214.813201] set brightness = 96
<7>[ 1214.844177] set brightness = 94
<7>[ 1214.897796] set brightness = 92
<7>[ 1214.906860] set brightness = 91
<7>[ 1214.938354] set brightness = 90
<7>[ 1214.954406] set brightness = 89
<3>[ 1307.700592] init: untracked pid 3285 exited
<3>[ 1356.398132] init: untracked pid 3293 exited
<6>[ 1357.738769] batt: M2A_RPC: level_update: 70 at 1354802457890 (2014-06-25 11:04:46.790700722 UTC)
<6>[ 1357.739257] batt: batt:power_supply_changed: battery at 1354802946171 (2014-06-25 11:04:46.791219521 UTC)
<6>[ 1357.741027] batt: SMEM_BATT: get_batt_info: batt_id=2, batt_vol=3989, batt_temp=347, batt_current=170, eval_current=0, level=70, charging_source=1, charging_enabled=1, full_bat=1500000, over_vchg=0 at 1354804960331 (2014-06-25 11:04:46.792959023 UTC)
<6>[ 1357.741882] batt: SMEM_BATT: get_batt_info: batt_id=2, batt_vol=3989, batt_temp=347, batt_current=170, eval_current=0, level=70, charging_source=1, charging_enabled=1, full_bat=1500000, over_vchg=0 at 1354820524297 (2014-06-25 11:04:46.793844033 UTC)
<6>[ 1357.757965] healthd: battery l=70 v=3 t=34.7 h=2 st=2 chg=u


Broadcasting: Intent { act=com.evervolv.toolbox.action.DUMPLOGCAT_FINISHED (has extras) }
Broadcast completed: result=0