------ KERNEL LOG (dmesg) ------
7
<7>[ 4833.209625] set brightness = 138
<7>[ 4833.225860] set brightness = 139
<7>[ 4833.259246] set brightness = 140
<7>[ 4833.275878] set brightness = 141
<7>[ 4833.309204] set brightness = 142
<7>[ 4833.325805] set brightness = 143
<7>[ 4833.359466] set brightness = 144
<7>[ 4833.375885] set brightness = 145
<7>[ 4833.409179] set brightness = 146
<7>[ 4833.425842] set brightness = 147
<7>[ 4833.459259] set brightness = 148
<7>[ 4833.476165] set brightness = 149
<7>[ 4833.510467] set brightness = 150
<7>[ 4833.525909] set brightness = 151
<7>[ 4833.559204] set brightness = 152
<7>[ 4833.577484] set brightness = 153
<7>[ 4833.609832] set brightness = 154
<7>[ 4833.625823] set brightness = 155
<7>[ 4833.659179] set brightness = 156
<7>[ 4833.675842] set brightness = 157
<7>[ 4833.709808] set brightness = 158
<7>[ 4833.725830] set brightness = 159
<7>[ 4833.759277] set brightness = 160
<7>[ 4833.775817] set brightness = 161
<7>[ 4833.809204] set brightness = 162
<7>[ 4833.825836] set brightness = 163
<7>[ 4833.858642] set brightness = 164
<7>[ 4907.857513] ALS value: 0x0, level: 0 #
<7>[ 4915.892761] set brightness = 163
<7>[ 4915.909332] set brightness = 162
<7>[ 4915.942504] set brightness = 161
<7>[ 4915.959320] set brightness = 160
<7>[ 4915.992523] set brightness = 159
<7>[ 4916.009368] set brightness = 158
<7>[ 4916.042541] set brightness = 157
<7>[ 4916.059326] set brightness = 156
<7>[ 4916.092468] set brightness = 155
<7>[ 4916.109313] set brightness = 154
<7>[ 4916.142669] set brightness = 153
<7>[ 4916.160583] set brightness = 152
<7>[ 4916.192474] set brightness = 151
<7>[ 4916.209289] set brightness = 150
<7>[ 4916.242553] set brightness = 149
<7>[ 4916.259582] set brightness = 148
<7>[ 4916.292541] set brightness = 147
<7>[ 4916.309387] set brightness = 146
<7>[ 4916.342468] set brightness = 145
<7>[ 4916.359863] set brightness = 144
<7>[ 4916.392486] set brightness = 143
<7>[ 4916.409332] set brightness = 142
<7>[ 4916.442443] set brightness = 141
<7>[ 4916.459289] set brightness = 140
<7>[ 4916.492492] set brightness = 139
<7>[ 4916.509307] set brightness = 138
<7>[ 4916.542694] set brightness = 137
<7>[ 4916.559387] set brightness = 136
<7>[ 4916.593994] set brightness = 135
<7>[ 4916.622039] set brightness = 134
<7>[ 4916.649566] set brightness = 133
<7>[ 4916.659606] set brightness = 132
<7>[ 4916.691192] set brightness = 131
<7>[ 4916.707916] set brightness = 130
<7>[ 4916.741180] set brightness = 129
<7>[ 4916.758514] set brightness = 128
<7>[ 4916.791229] set brightness = 127
<7>[ 4916.807922] set brightness = 126
<7>[ 4916.841186] set brightness = 125
<7>[ 4916.858642] set brightness = 124
<7>[ 4916.891662] set brightness = 123
<7>[ 4916.909301] set brightness = 122
<7>[ 4916.942504] set brightness = 121
<7>[ 4916.959899] set brightness = 120
<7>[ 4916.992462] set brightness = 119
<7>[ 4917.009338] set brightness = 118
<7>[ 4917.042480] set brightness = 117
<7>[ 4917.059417] set brightness = 116
<7>[ 4917.092498] set brightness = 115
<7>[ 4917.109374] set brightness = 114
<7>[ 4917.142456] set brightness = 113
<7>[ 4917.159301] set brightness = 112
<7>[ 4917.192504] set brightness = 111
<7>[ 4917.209320] set brightness = 110
<7>[ 4917.242553] set brightness = 109
<7>[ 4917.259399] set brightness = 108
<7>[ 4917.292480] set brightness = 107
<7>[ 4917.309326] set brightness = 106
<7>[ 4917.342498] set brightness = 105
<7>[ 4917.360565] set brightness = 104
<7>[ 4917.392456] set brightness = 103
<7>[ 4917.409301] set brightness = 102
<7>[ 4917.442504] set brightness = 101
<7>[ 4917.459686] set brightness = 100
<7>[ 4917.492553] set brightness = 99
<7>[ 4917.509307] set brightness = 98
<7>[ 4917.542694] set brightness = 97
<7>[ 4917.559906] set brightness = 96
<7>[ 4917.592529] set brightness = 95
<7>[ 4917.609771] set brightness = 94
<7>[ 4917.642456] set brightness = 93
<7>[ 4917.659393] set brightness = 92
<7>[ 4917.692504] set brightness = 91
<7>[ 4917.708709] set brightness = 90
<7>[ 4929.908752] set brightness = 89
<7>[ 4936.425872] set brightness = 88
<7>[ 4936.442535] set brightness = 85
<7>[ 4936.459442] set brightness = 81
<7>[ 4936.475830] set brightness = 78
<7>[ 4936.492492] set brightness = 75
<7>[ 4936.509246] set brightness = 71
<7>[ 4936.525817] set brightness = 68
<7>[ 4936.542510] set brightness = 65
<7>[ 4936.559295] set brightness = 61
<7>[ 4936.575866] set brightness = 58
<7>[ 4936.592559] set brightness = 55
<7>[ 4936.609313] set brightness = 51
<7>[ 4936.625854] set brightness = 48
<7>[ 4936.642517] set brightness = 45
<7>[ 4936.659362] set brightness = 41
<7>[ 4936.675903] set brightness = 38
<7>[ 4936.692535] set brightness = 35
<7>[ 4936.709289] set brightness = 31
<7>[ 4936.725830] set brightness = 28
<7>[ 4936.742523] set brightness = 25
<7>[ 4936.759399] set brightness = 21
<7>[ 4936.775817] set brightness = 18
<7>[ 4936.792541] set brightness = 15
<7>[ 4936.810546] set brightness = 11
<7>[ 4936.825225] set brightness = 10
<6>[ 4943.441101] lightsensor_ioctl set value = 0
<6>[ 4943.441558] lightsensor_disable
<7>[ 4944.102325] set brightness = 0
<4>[ 4944.169586] dhd_set_suspend: force extra Suspend setting 
<4>[ 4944.182281] dhd_get_dtim_skip bcn_li_dtim=3 DTIM=3 Listen=10
<6>[ 4944.287292] __spi_bma150_set_mode: BMA get into SLEEP mode!
<6>[ 4944.353027] request_suspend_state: sleep (0->3) at 4941746263922 (2017-02-04 04:51:35.679033846 UTC)
<6>[ 4944.353546] [R] early_suspend start
<6>[ 4944.427551] __spi_bma150_set_mode: BMA get into SLEEP mode!
<7>[ 4944.427947] bma150_early_suspend: spi_bma150_set_mode returned = 0!
<7>[ 4944.446014] supersonic_panel_blank
<7>[ 4944.446228] set brightness = 0
<4>[ 4944.447235] [hdmi/fb]hdmifb_suspend, use_count=0
<4>[ 4944.447479] [hdmi/fb]hdmifb_suspend: hdmifb_suspending = true
<4>[ 4944.447875] [hdmi/lcdc]lcdc_suspend
<4>[ 4944.448089] [hdmi/tx]hdmi_panel_uninit
<4>[ 4944.448303] [hdmi]suc_hdmi_gpio_off
<4>[ 4944.449005] [hdmi/tx]suspending=true, disable timer
<4>[ 4944.449249] [hdmi/tx]hdmi_panel_uninit
<4>[ 4944.449462] [hdmi/tx]hdmi_standby
<4>[ 4944.449829] [hdmi]hdmi_power(4)
<4>[ 4944.450042] [hdmi/lcdc]lcdc_disable_video, blank_count=0
<7>[ 4944.450317] __capella_cm3602_power: Turn the capella_cm3602 power off
<6>[ 4944.456054] atmel_ts_suspend: enter
<7>[ 4944.468017] mddi_novatec_power: power off.
<6>[ 4944.597351] [R] early_suspend: sync
<6>[ 4944.735534] [R] early_suspend end
<6>[ 4949.542602] msmfb: pan_update in state(4)
<6>[ 4949.542633] msmfb: drawing while asleep
<6>[ 4949.638305] msmfb: pan_update in state(4)
<6>[ 4949.638336] msmfb: drawing while asleep
<6>[ 4949.738616] msmfb: pan_update in state(4)
<6>[ 4949.738616] msmfb: drawing while asleep
<6>[ 5008.486145] gpio_keys_scan_keys: key 1-74, 0 (94) changed to 1
<6>[ 5008.506500] lightsensor_ioctl set value = 1
<6>[ 5008.507446] lightsensor_enable
<3>[ 5008.507904] lightsensor_enable: microp is suspended
<6>[ 5008.537384] __spi_bma150_set_mode: BMA get into NORMAL mode!
<6>[ 5008.566528] request_suspend_state: wakeup (3->0) at 5005959734355 (2017-02-04 04:52:39.892473761 UTC)
<6>[ 5008.567657] [R] late_resume start
<6>[ 5008.666961] mddi_wait_interrupt 4078, timeout waiting for 4000, INT = 10, STAT = 10 gotint = 2a004
<6>[ 5008.699035] gpio_keys_scan_keys: key 1-74, 0 (94) continue debounce
<6>[ 5008.719940] gpio_keys_scan_keys: key 1-74, 0 (94) continue debounce
<6>[ 5008.740509] gpio_keys_scan_keys: key 1-74, 0 (94) changed to 0
<6>[ 5008.766937] mddi_wait_interrupt 4078, timeout waiting for 20000, INT = 10, STAT = 10 gotint = a004
<7>[ 5008.767822] mddi_novatec_power: power on.
<6>[ 5008.832733] msmfb: pan_update in state(4)
<6>[ 5008.832763] msmfb: drawing while asleep
<6>[ 5008.933624] msmfb: pan_update in state(4)
<6>[ 5008.933685] msmfb: drawing while asleep
<6>[ 5009.027008] msmfb: ready, waiting for full update
<6>[ 5009.040405] msmfb: pan_update in state(1)
<6>[ 5009.040435] msmfb: full update starting
<6>[ 5009.066070] msmfb: pan_update in state(3)
<6>[ 5009.068267] [CAM]ov8810_resume
<7>[ 5009.068389] __capella_cm3602_power: Turn the capella_cm3602 power on
<4>[ 5009.068511] [hdmi/fb]hdmifb_resume
<4>[ 5009.068542] [hdmi/lcdc]lcdc_resume
<4>[ 5009.068572] [hdmi/tx]hdmi_panel_init
<4>[ 5009.068603] [hdmi]suc_hdmi_gpio_on
<4>[ 5009.069305] [hdmi]hdmi_power(5)
<6>[ 5009.069427] [R] late_resume end
<6>[ 5009.075286] msmfb: full update completed
<6>[ 5009.075439] msmfb: turning on panel
<7>[ 5009.075500] supersonic_panel_unblank
<7>[ 5009.075531] turn on backlight
<7>[ 5009.075561] set brightness = 100
<7>[ 5009.101074] set brightness = 89
<7>[ 5009.927429] ALS value: 0x0, level: 0 #
<6>[ 5009.981201] S1@567,759
<7>[ 5010.047882] ALS value: 0x1, level: 0 #
<6>[ 5010.304962] E1@953,750
<7>[ 5067.267517] ALS value: 0x4, level: 1 #
<7>[ 5071.292633] set brightness = 90
<7>[ 5071.325836] set brightness = 91
<7>[ 5071.342529] set brightness = 92
<7>[ 5071.375823] set brightness = 93
<7>[ 5071.392547] set brightness = 94
<7>[ 5071.425842] set brightness = 95
<7>[ 5071.442474] set brightness = 96
<7>[ 5071.475891] set brightness = 97
<7>[ 5071.492523] set brightness = 98
<7>[ 5071.525756] set brightness = 99
<7>[ 5071.542510] set brightness = 100
<7>[ 5071.577331] set brightness = 101
<7>[ 5071.592529] set brightness = 102
<7>[ 5071.625823] set brightness = 103
<7>[ 5071.642517] set brightness = 104
<7>[ 5071.675781] set brightness = 105
<7>[ 5071.692535] set brightness = 106
<7>[ 5071.725830] set brightness = 107
<7>[ 5071.742553] set brightness = 108
<7>[ 5071.775756] set brightness = 109
<7>[ 5071.794006] set brightness = 110
<7>[ 5071.825897] set brightness = 111
<7>[ 5071.842559] set brightness = 112
<7>[ 5071.875885] set brightness = 113
<7>[ 5071.892547] set brightness = 114
<7>[ 5071.925781] set brightness = 115
<7>[ 5071.942596] set brightness = 116
<7>[ 5071.975830] set brightness = 117
<7>[ 5071.992553] set brightness = 118
<7>[ 5072.025787] set brightness = 119
<7>[ 5072.042510] set brightness = 120
<7>[ 5072.075866] set brightness = 121
<7>[ 5072.092529] set brightness = 122
<7>[ 5072.125823] set brightness = 123
<7>[ 5072.142517] set brightness = 124
<7>[ 5072.177276] set brightness = 125
<7>[ 5072.192504] set brightness = 126
<7>[ 5072.225769] set brightness = 127
<7>[ 5072.242523] set brightness = 128
<7>[ 5072.275787] set brightness = 129
<7>[ 5072.292480] set brightness = 130
<7>[ 5072.325836] set brightness = 131
<7>[ 5072.342529] set brightness = 132
<7>[ 5072.375823] set brightness = 133
<7>[ 5072.392456] set brightness = 134
<7>[ 5072.425842] set brightness = 135
<7>[ 5072.442535] set brightness = 136
<7>[ 5072.475860] set brightness = 137
<7>[ 5072.492492] set brightness = 138
<7>[ 5072.525817] set brightness = 139
<7>[ 5072.542541] set brightness = 140
<7>[ 5072.575836] set brightness = 141
<7>[ 5072.592559] set brightness = 142
<7>[ 5072.625793] set brightness = 143
<7>[ 5072.642547] set brightness = 144
<7>[ 5072.675872] set brightness = 145
<7>[ 5072.692565] set brightness = 146
<7>[ 5072.725799] set brightness = 147
<7>[ 5072.742523] set brightness = 148
<7>[ 5072.787902] set brightness = 149
<7>[ 5072.797637] set brightness = 150
<7>[ 5072.826080] set brightness = 151
<7>[ 5072.841369] set brightness = 152
<7>[ 5072.874481] set brightness = 153
<7>[ 5072.891204] set brightness = 154
<7>[ 5072.924499] set brightness = 155
<7>[ 5072.941223] set brightness = 156
<7>[ 5072.974517] set brightness = 157
<7>[ 5072.991241] set brightness = 158
<7>[ 5073.024505] set brightness = 159
<7>[ 5073.041748] set brightness = 160
<7>[ 5073.075103] set brightness = 161
<7>[ 5073.092468] set brightness = 162
<7>[ 5073.125762] set brightness = 163
<7>[ 5073.141937] set brightness = 164
<6>[ 5123.477630] batt: M2A_RPC: level_update: 71 at 5120871355475 (2017-02-04 04:54:34.803637117 UTC)
<6>[ 5123.478637] batt: batt:power_supply_changed: battery at 5120872698248 (2017-02-04 04:54:34.804674715 UTC)
<6>[ 5123.482208] batt: SMEM_BATT: get_batt_info: batt_id=1, batt_vol=4179, batt_temp=321, batt_current=130, eval_current=0, level=71, charging_source=1, charging_enabled=1, full_bat=1500000, over_vchg=0 at 5120876818121 (2017-02-04 04:54:34.808184236 UTC)
<6>[ 5123.484313] batt: SMEM_BATT: get_batt_info: batt_id=1, batt_vol=4179, batt_temp=321, batt_current=130, eval_current=0, level=71, charging_source=1, charging_enabled=1, full_bat=1500000, over_vchg=0 at 5120886614264 (2017-02-04 04:54:34.810320467 UTC)
<6>[ 5123.498260] healthd: battery l=71 v=4 t=32.1 h=2 st=2 chg=u
<7>[ 5175.275848] set brightness = 161
<7>[ 5175.292541] set brightness = 158
<7>[ 5175.309326] set brightness = 154
<7>[ 5175.325836] set brightness = 151
<7>[ 5175.342529] set brightness = 148
<7>[ 5175.359283] set brightness = 144
<7>[ 5175.375823] set brightness = 141
<7>[ 5175.392517] set brightness = 138
<7>[ 5175.409271] set brightness = 134
<7>[ 5175.425872] set brightness = 131
<7>[ 5175.442596] set brightness = 128
<7>[ 5175.459350] set brightness = 124
<7>[ 5175.475860] set brightness = 121
<7>[ 5175.492553] set brightness = 118
<7>[ 5175.510345] set brightness = 114
<7>[ 5175.525817] set brightness = 111
<7>[ 5175.542510] set brightness = 108
<7>[ 5175.559448] set brightness = 104
<7>[ 5175.575836] set brightness = 101
<7>[ 5175.592468] set brightness = 98
<7>[ 5175.609924] set brightness = 94
<7>[ 5175.625854] set brightness = 91
<7>[ 5175.642517] set brightness = 88
<7>[ 5175.660522] set brightness = 84
<7>[ 5175.675811] set brightness = 81
<7>[ 5175.692474] set brightness = 78
<7>[ 5175.709320] set brightness = 74
<7>[ 5175.727447] set brightness = 71
<7>[ 5175.742523] set brightness = 68
<7>[ 5175.761474] set brightness = 64
<7>[ 5175.775909] set brightness = 61
<7>[ 5175.792541] set brightness = 58
<7>[ 5175.809295] set brightness = 54
<7>[ 5175.825836] set brightness = 51
<7>[ 5175.842529] set brightness = 48
<7>[ 5175.859863] set brightness = 44
<7>[ 5175.875823] set brightness = 41
<7>[ 5175.892517] set brightness = 38
<7>[ 5175.909332] set brightness = 34
<7>[ 5175.926025] set brightness = 31
<7>[ 5175.942901] set brightness = 28
<7>[ 5175.959320] set brightness = 24
<7>[ 5175.975830] set brightness = 21
<7>[ 5175.992523] set brightness = 18
<7>[ 5176.009307] set brightness = 14
<7>[ 5176.025848] set brightness = 11
<7>[ 5176.041900] set brightness = 10
<6>[ 5182.256439] lightsensor_ioctl set value = 0
<6>[ 5182.257019] lightsensor_disable
<4>[ 5183.009643] dhd_set_suspend: force extra Suspend setting 
<4>[ 5183.015319] dhd_get_dtim_skip bcn_li_dtim=3 DTIM=3 Listen=10
<7>[ 5183.068756] set brightness = 0
<6>[ 5183.091583] request_suspend_state: sleep (0->3) at 5180484819831 (2017-02-04 04:55:34.417589755 UTC)
<6>[ 5183.091918] [R] early_suspend start
<6>[ 5183.137268] __spi_bma150_set_mode: BMA get into SLEEP mode!
<6>[ 5183.217529] __spi_bma150_set_mode: BMA get into SLEEP mode!
<7>[ 5183.217987] bma150_early_suspend: spi_bma150_set_mode returned = 0!
<7>[ 5183.236022] supersonic_panel_blank
<7>[ 5183.236389] set brightness = 0
<4>[ 5183.237243] [hdmi/fb]hdmifb_suspend, use_count=0
<4>[ 5183.237518] [hdmi/fb]hdmifb_suspend: hdmifb_suspending = true
<4>[ 5183.237915] [hdmi/lcdc]lcdc_suspend
<4>[ 5183.238128] [hdmi/tx]hdmi_panel_uninit
<4>[ 5183.238342] [hdmi]suc_hdmi_gpio_off
<4>[ 5183.239074] [hdmi/tx]suspending=true, disable timer
<4>[ 5183.239288] [hdmi/tx]hdmi_panel_uninit
<4>[ 5183.239501] [hdmi/tx]hdmi_standby
<4>[ 5183.239868] [hdmi]hdmi_power(4)
<4>[ 5183.240081] [hdmi/lcdc]lcdc_disable_video, blank_count=0
<7>[ 5183.240386] __capella_cm3602_power: Turn the capella_cm3602 power off
<6>[ 5183.246032] atmel_ts_suspend: enter
<7>[ 5183.251403] mddi_novatec_power: power off.
<6>[ 5183.377197] [R] early_suspend: sync
<6>[ 5183.518585] [R] early_suspend end
<6>[ 5188.557434] msmfb: pan_update in state(4)
<6>[ 5188.557464] msmfb: drawing while asleep
<6>[ 5188.658843] msmfb: pan_update in state(4)
<6>[ 5188.658843] msmfb: drawing while asleep
<6>[ 5188.758392] msmfb: pan_update in state(4)
<6>[ 5188.758422] msmfb: drawing while asleep
<6>[ 5423.477508] batt: M2A_RPC: set_charging: 100 at 5420871599584 (2017-02-04 04:59:34.803515016 UTC)
<6>[ 5423.478820] TPS65200 Switch charger set control100
<6>[ 5423.479614] Switch charger CHECK 
<6>[ 5423.481384] TPS65200 STATUS_A26, INT2:0
<6>[ 5543.477600] batt: M2A_RPC: level_update: 72 at 5540871660618 (2017-02-04 05:01:34.803606568 UTC)
<6>[ 5543.478912] batt: batt:power_supply_changed: battery at 5540872637181 (2017-02-04 05:01:34.804949341 UTC)
<6>[ 5543.482482] batt: SMEM_BATT: get_batt_info: batt_id=1, batt_vol=4181, batt_temp=315, batt_current=110, eval_current=0, level=72, charging_source=1, charging_enabled=1, full_bat=1500000, over_vchg=0 at 5540876787571 (2017-02-04 05:01:34.808489380 UTC)
<6>[ 5543.484649] batt: SMEM_BATT: get_batt_info: batt_id=1, batt_vol=4181, batt_temp=315, batt_current=110, eval_current=0, level=72, charging_source=1, charging_enabled=1, full_bat=1500000, over_vchg=0 at 5540885118871 (2017-02-04 05:01:34.810656128 UTC)
<6>[ 5543.498229] healthd: battery l=72 v=4 t=31.5 h=2 st=2 chg=u
<6>[ 5813.862609] gpio_keys_scan_keys: key 1-74, 0 (94) changed to 1
<6>[ 5813.869812] lightsensor_ioctl set value = 1
<6>[ 5813.870269] lightsensor_enable
<3>[ 5813.870697] lightsensor_enable: microp is suspended
<6>[ 5813.917541] __spi_bma150_set_mode: BMA get into NORMAL mode!
<6>[ 5813.936401] request_suspend_state: wakeup (3->0) at 5811329607403 (2017-02-04 05:06:05.262377327 UTC)
<6>[ 5813.937530] [R] late_resume start
<6>[ 5814.036926] mddi_wait_interrupt 3405, timeout waiting for 4000, INT = 10, STAT = 10 gotint = 2a004
<6>[ 5814.102508] gpio_keys_scan_keys: key 1-74, 0 (94) continue debounce
<6>[ 5814.123718] gpio_keys_scan_keys: key 1-74, 0 (94) continue debounce
<6>[ 5814.126098] msmfb: pan_update in state(4)
<6>[ 5814.126129] msmfb: drawing while asleep
<6>[ 5814.136932] mddi_wait_interrupt 3405, timeout waiting for 20000, INT = 10, STAT = 10 gotint = a004
<7>[ 5814.136993] mddi_novatec_power: power on.
<6>[ 5814.144317] gpio_keys_scan_keys: key 1-74, 0 (94) changed to 0
<6>[ 5814.224670] msmfb: pan_update in state(4)
<6>[ 5814.224700] msmfb: drawing while asleep
<6>[ 5814.396942] msmfb: ready, waiting for full update
<6>[ 5814.438232] [CAM]ov8810_resume
<7>[ 5814.438781] __capella_cm3602_power: Turn the capella_cm3602 power on
<4>[ 5814.439727] [hdmi/fb]hdmifb_resume
<4>[ 5814.440185] [hdmi/lcdc]lcdc_resume
<4>[ 5814.440612] [hdmi/tx]hdmi_panel_init
<4>[ 5814.441375] [hdmi]suc_hdmi_gpio_on
<4>[ 5814.442535] [hdmi]hdmi_power(5)
<6>[ 5814.443176] [R] late_resume end
<7>[ 5814.452117] set brightness = 120
<6>[ 5814.477752] msmfb: pan_update in state(1)
<6>[ 5814.477752] msmfb: full update starting
<7>[ 5814.490753] set brightness = 128
<7>[ 5814.491241] set brightness = 131
<7>[ 5814.508972] set brightness = 134
<6>[ 5814.512207] msmfb: full update completed
<6>[ 5814.512542] msmfb: turning on panel
<7>[ 5814.512725] supersonic_panel_unblank
<7>[ 5814.512878] turn on backlight
<7>[ 5814.513031] set brightness = 134
<6>[ 5814.528076] msmfb: pan_update in state(3)
<7>[ 5814.537994] set brightness = 138
<7>[ 5814.572814] set brightness = 144
<7>[ 5814.580383] set brightness = 148
<7>[ 5814.591278] set brightness = 151
<7>[ 5814.607910] set brightness = 154
<7>[ 5814.624511] set brightness = 158
<7>[ 5814.672698] set brightness = 164
<7>[ 5815.297424] ALS value: 0x0, level: 0 #
<7>[ 5815.417510] ALS value: 0x1, level: 0 #
<7>[ 5821.875885] set brightness = 163
<7>[ 5821.892486] set brightness = 159
<7>[ 5821.909240] set brightness = 156
<7>[ 5821.925842] set brightness = 153
<7>[ 5821.942535] set brightness = 149
<7>[ 5821.959289] set brightness = 146
<7>[ 5821.975830] set brightness = 143
<7>[ 5821.992492] set brightness = 139
<7>[ 5822.009277] set brightness = 136
<7>[ 5822.025787] set brightness = 133
<7>[ 5822.042510] set brightness = 129
<7>[ 5822.059295] set brightness = 126
<7>[ 5822.075866] set brightness = 123
<7>[ 5822.092590] set brightness = 119
<7>[ 5822.110809] set brightness = 116
<7>[ 5822.125823] set brightness = 113
<7>[ 5822.142486] set brightness = 109
<7>[ 5822.159240] set brightness = 106
<7>[ 5822.177337] set brightness = 103
<7>[ 5822.192565] set brightness = 99
<7>[ 5822.209533] set brightness = 96
<7>[ 5822.225799] set brightness = 93
<7>[ 5822.242553] set brightness = 89
<7>[ 5822.259277] set brightness = 86
<7>[ 5822.275817] set brightness = 83
<7>[ 5822.292480] set brightness = 79
<7>[ 5822.309844] set brightness = 76
<7>[ 5822.325775] set brightness = 73
<7>[ 5822.342498] set brightness = 69
<7>[ 5822.359436] set brightness = 66
<7>[ 5822.375854] set brightness = 63
<7>[ 5822.392547] set brightness = 59
<7>[ 5822.409301] set brightness = 56
<7>[ 5822.425781] set brightness = 53
<7>[ 5822.442504] set brightness = 49
<7>[ 5822.459289] set brightness = 46
<7>[ 5822.505249] set brightness = 39
<7>[ 5822.547180] set brightness = 29
<7>[ 5822.559112] set brightness = 26
<7>[ 5822.574707] set brightness = 23
<7>[ 5822.591217] set brightness = 19
<7>[ 5822.607910] set brightness = 16
<7>[ 5822.624511] set brightness = 13
<7>[ 5822.640930] set brightness = 10
<6>[ 5823.866149] lightsensor_ioctl set value = 0
<6>[ 5823.866607] lightsensor_disable
<6>[ 5823.878540] S1@343,800
<6>[ 5824.155426] E1@950,719
<7>[ 5824.565795] set brightness = 0
<4>[ 5824.638488] dhd_set_suspend: force extra Suspend setting 
<4>[ 5824.652252] dhd_get_dtim_skip bcn_li_dtim=3 DTIM=3 Listen=10
<6>[ 5824.687286] __spi_bma150_set_mode: BMA get into SLEEP mode!
<6>[ 5824.932464] request_suspend_state: sleep (0->3) at 5822325701179 (2017-02-04 05:06:16.258471103 UTC)
<6>[ 5824.932800] [R] early_suspend start
<6>[ 5825.007446] __spi_bma150_set_mode: BMA get into SLEEP mode!
<7>[ 5825.007690] bma150_early_suspend: spi_bma150_set_mode returned = 0!
<7>[ 5825.026031] supersonic_panel_blank
<7>[ 5825.026245] set brightness = 0
<4>[ 5825.027069] [hdmi/fb]hdmifb_suspend, use_count=0
<4>[ 5825.027465] [hdmi/fb]hdmifb_suspend: hdmifb_suspending = true
<4>[ 5825.027679] [hdmi/lcdc]lcdc_suspend
<4>[ 5825.028045] [hdmi/tx]hdmi_panel_uninit
<4>[ 5825.028259] [hdmi]suc_hdmi_gpio_off
<4>[ 5825.028839] [hdmi/tx]suspending=true, disable timer
<4>[ 5825.029235] [hdmi/tx]hdmi_panel_uninit
<4>[ 5825.029449] [hdmi/tx]hdmi_standby
<4>[ 5825.029663] [hdmi]hdmi_power(4)
<4>[ 5825.029998] [hdmi/lcdc]lcdc_disable_video, blank_count=0
<7>[ 5825.030303] __capella_cm3602_power: Turn the capella_cm3602 power off
<6>[ 5825.036071] atmel_ts_suspend: enter
<7>[ 5825.043548] mddi_novatec_power: power off.
<6>[ 5825.167358] [R] early_suspend: sync
<6>[ 5825.317565] [R] early_suspend end
<6>[ 5825.783813] gpio_keys_scan_keys: key 1-74, 0 (94) changed to 1
<6>[ 5825.803192] lightsensor_ioctl set value = 1
<6>[ 5825.804016] lightsensor_enable
<3>[ 5825.804443] lightsensor_enable: microp is suspended
<6>[ 5825.837432] __spi_bma150_set_mode: BMA get into NORMAL mode!
<6>[ 5825.927368] msmfb: pan_update in state(4)
<6>[ 5825.927398] msmfb: drawing while asleep
<6>[ 5825.997253] request_suspend_state: wakeup (3->0) at 5823390459480 (2017-02-04 05:06:17.323198886 UTC)
<6>[ 5825.997375] [R] late_resume start
<6>[ 5826.055541] gpio_keys_scan_keys: key 1-74, 0 (94) continue debounce
<6>[ 5826.076110] gpio_keys_scan_keys: key 1-74, 0 (94) continue debounce
<6>[ 5826.096923] mddi_wait_interrupt 5472, timeout waiting for 4000, INT = 10, STAT = 10 gotint = 2a004
<6>[ 5826.097839] gpio_keys_scan_keys: key 1-74, 0 (94) changed to 0
<6>[ 5826.111206] msmfb: pan_update in state(4)
<6>[ 5826.111236] msmfb: drawing while asleep
<6>[ 5826.196960] mddi_wait_interrupt 5472, timeout waiting for 20000, INT = 10, STAT = 10 gotint = a004
<7>[ 5826.197021] mddi_novatec_power: power on.
<6>[ 5826.214782] msmfb: pan_update in state(4)
<6>[ 5826.214813] msmfb: drawing while asleep
<6>[ 5826.342071] msmfb: pan_update in state(4)
<6>[ 5826.342102] msmfb: drawing while asleep
<6>[ 5826.456909] msmfb: ready, waiting for full update
<6>[ 5826.492828] [CAM]ov8810_resume
<7>[ 5826.493347] __capella_cm3602_power: Turn the capella_cm3602 power on
<4>[ 5826.494262] [hdmi/fb]hdmifb_resume
<4>[ 5826.494720] [hdmi/lcdc]lcdc_resume
<4>[ 5826.495208] [hdmi/tx]hdmi_panel_init
<4>[ 5826.495971] [hdmi]suc_hdmi_gpio_on
<4>[ 5826.497344] [hdmi]hdmi_power(5)
<6>[ 5826.497985] [R] late_resume end
<6>[ 5826.498718] Touch Status: 0x01 0x40 0xEA 0xD8 0x09 
<6>[ 5826.504333] Touch Status: 0x01 0x00 0xEA 0xD8 0x09 
<6>[ 5826.514709] msmfb: pan_update in state(1)
<6>[ 5826.514739] msmfb: full update starting
<7>[ 5826.529174] set brightness = 89
<6>[ 5826.549224] msmfb: full update completed
<6>[ 5826.549530] msmfb: turning on panel
<7>[ 5826.549713] supersonic_panel_unblank
<7>[ 5826.549896] turn on backlight
<7>[ 5826.550048] set brightness = 89
<6>[ 5826.565002] msmfb: pan_update in state(3)
<6>[ 5827.075653] S1@570,767
<6>[ 5827.293304] E1@895,722
<7>[ 5827.347442] ALS value: 0x0, level: 0 #
<7>[ 5827.467437] ALS value: 0x1, level: 0 #
<6>[ 5829.059478] gpio_keys_scan_keys: key 1-74, 0 (94) continue debounce
<6>[ 5829.080413] gpio_keys_scan_keys: key 1-74, 0 (94) changed to 1
<6>[ 5829.323638] gpio_keys_scan_keys: key 1-74, 0 (94) continue debounce
<6>[ 5829.344543] gpio_keys_scan_keys: key 1-74, 0 (94) continue debounce
<6>[ 5829.365081] gpio_keys_scan_keys: key 1-74, 0 (94) changed to 0
<6>[ 5829.369018] lightsensor_ioctl set value = 0
<6>[ 5829.369476] lightsensor_disable
<7>[ 5830.033813] set brightness = 0
<4>[ 5830.106140] dhd_set_suspend: force extra Suspend setting 
<4>[ 5830.122985] dhd_get_dtim_skip bcn_li_dtim=3 DTIM=3 Listen=10
<6>[ 5830.227264] __spi_bma150_set_mode: BMA get into SLEEP mode!
<6>[ 5830.462860] request_suspend_state: sleep (0->3) at 5827856096685 (2017-02-04 05:06:21.788866609 UTC)
<6>[ 5830.463317] [R] early_suspend start
<6>[ 5830.537536] __spi_bma150_set_mode: BMA get into SLEEP mode!
<7>[ 5830.537963] bma150_early_suspend: spi_bma150_set_mode returned = 0!
<7>[ 5830.556152] supersonic_panel_blank
<7>[ 5830.556549] set brightness = 0
<4>[ 5830.557403] [hdmi/fb]hdmifb_suspend, use_count=0
<4>[ 5830.557647] [hdmi/fb]hdmifb_suspend: hdmifb_suspending = true
<4>[ 5830.558044] [hdmi/lcdc]lcdc_suspend
<4>[ 5830.558288] [hdmi/tx]hdmi_panel_uninit
<4>[ 5830.558502] [hdmi]suc_hdmi_gpio_off
<4>[ 5830.559234] [hdmi/tx]suspending=true, disable timer
<4>[ 5830.559478] [hdmi/tx]hdmi_panel_uninit
<4>[ 5830.559722] [hdmi/tx]hdmi_standby
<4>[ 5830.560089] [hdmi]hdmi_power(4)
<4>[ 5830.560302] [hdmi/lcdc]lcdc_disable_video, blank_count=0
<7>[ 5830.560760] __capella_cm3602_power: Turn the capella_cm3602 power off
<6>[ 5830.566070] atmel_ts_suspend: enter
<7>[ 5830.572906] mddi_novatec_power: power off.
<6>[ 5830.697235] [R] early_suspend: sync
<6>[ 5830.838958] [R] early_suspend end
<6>[ 6023.477508] batt: M2A_RPC: set_charging: 100 at 6020871569069 (2017-02-04 05:09:34.803515018 UTC)
<6>[ 6023.478790] TPS65200 Switch charger set control100
<6>[ 6023.479583] Switch charger CHECK 
<6>[ 6023.481353] TPS65200 STATUS_A26, INT2:0
<6>[ 6083.477508] batt: M2A_RPC: level_update: 73 at 6080871569067 (2017-02-04 05:10:34.803515016 UTC)
<6>[ 6083.478820] batt: batt:power_supply_changed: battery at 6080872545629 (2017-02-04 05:10:34.804857790 UTC)
<6>[ 6083.482391] batt: SMEM_BATT: get_batt_info: batt_id=1, batt_vol=4181, batt_temp=315, batt_current=98, eval_current=0, level=73, charging_source=1, charging_enabled=1, full_bat=1500000, over_vchg=0 at 6080876696020 (2017-02-04 05:10:34.808397829 UTC)
<6>[ 6083.484527] batt: SMEM_BATT: get_batt_info: batt_id=1, batt_vol=4181, batt_temp=315, batt_current=98, eval_current=0, level=73, charging_source=1, charging_enabled=1, full_bat=1500000, over_vchg=0 at 6080884783179 (2017-02-04 05:10:34.810503541 UTC)
<6>[ 6083.497955] healthd: battery l=73 v=4 t=31.5 h=2 st=2 chg=u
<6>[ 6128.398834] msm72k_udc: usb: suspend
<6>[ 6130.454010] batt: tps65200_int_detection: over voltage is detected. at 6127847765359 (2017-02-04 05:11:21.780016484 UTC)
<6>[ 6130.646881] Switch charger CHECK_INT2 
<6>[ 6130.648040] TPS65200 INT2 80
<6>[ 6130.648498] batt: Read TPS65200 INT2 register value: 80 at 6128042559062 (2017-02-04 05:11:21.974505012 UTC)
<6>[ 6130.649749] Switch charger CHECK_INT2 
<6>[ 6130.650817] TPS65200 INT2 0
<6>[ 6130.651580] batt: Read TPS65200 INT2 register value: 0 at 6128045305644 (2017-02-04 05:11:21.977617805 UTC)
<6>[ 6130.652526] Switch charger CHECK_INT2 
<6>[ 6130.653930] TPS65200 INT2 0
<6>[ 6130.654388] batt: Read TPS65200 INT2 register value: 0 at 6128048113261 (2017-02-04 05:11:21.980394904 UTC)
<6>[ 6130.655639] Switch charger CHECK_CONTROL 
<6>[ 6130.656707] TPS65200 regh 0x00=e6
<6>[ 6131.486938] batt: M2A_RPC: set_charging: 0 at 6128880724345 (2017-02-04 05:11:22.812944952 UTC)
<6>[ 6131.487945] TPS65200 Switch charger set control0
<6>[ 6131.488739] Switch charger OFF
<6>[ 6131.491394] batt: M2A_RPC: cable_update: none at 6128885118876 (2017-02-04 05:11:22.817400519 UTC)
<6>[ 6131.492645] batt: htc_cable_status_update: 1 -> 0
<6>[ 6131.493133] msm_hsusb_set_vbus_state: 0
<6>[ 6131.493927] supersonic_uart_usb_switch:uart:1
<6>[ 6131.494384] supersonic_uart_usb_switch:Non wimax UART
<6>[ 6131.494873] hsusb: ONLINE -> OFFLINE
<6>[ 6131.495697] usb: notify offline
<6>[ 6131.496185] msm_hsusb_phy_reset
<6>[ 6131.496948] batt: Update SMEM: cable type 0 at 6128893358623 (2017-02-04 05:11:22.822954719 UTC)
<6>[ 6131.504547] batt: batt:(htc_cable_status_update)power_supply_changed: battery at 6128909075176 (2017-02-04 05:11:22.830584113 UTC)
<6>[ 6131.518585] batt: SMEM_BATT: get_batt_info: batt_id=1, batt_vol=4121, batt_temp=312, batt_current=-110, eval_current=0, level=73, charging_source=0, charging_enabled=0, full_bat=1500000, over_vchg=0 at 6128927874004 (2017-02-04 05:11:22.844591682 UTC)
<6>[ 6131.539123] batt: SMEM_BATT: get_batt_info: batt_id=1, batt_vol=4121, batt_temp=312, batt_current=-110, eval_current=0, level=73, charging_source=0, charging_enabled=0, full_bat=1500000, over_vchg=0 at 6128949968731 (2017-02-04 05:11:22.865130013 UTC)
<6>[ 6131.560791] usb: lpm enter
<6>[ 6131.563385] usb_suspend_phy
<6>[ 6131.567749] usb: send connect type 0
<6>[ 6131.570129] Touch: cable change to 0
<6>[ 6131.575195] healthd: battery l=73 v=4 t=31.2 h=2 st=4 chg=
<6>[ 6131.581359] batt:online=0
<6>[ 6131.581878] batt: Update SMEM: cable type 0 at 6128978655256 (2017-02-04 05:11:22.907915659 UTC)
<6>[ 6131.628387] batt: SMEM_BATT: get_batt_info: batt_id=1, batt_vol=4121, batt_temp=312, batt_current=-110, eval_current=0, level=73, charging_source=0, charging_enabled=0, full_bat=1500000, over_vchg=0 at 6129022814194 (2017-02-04 05:11:22.954363415 UTC)
<6>[ 6131.630767] batt: SMEM_BATT: get_batt_info: batt_id=1, batt_vol=4121, batt_temp=312, batt_current=-110, eval_current=0, level=73, charging_source=0, charging_enabled=0, full_bat=1500000, over_vchg=0 at 6129025164047 (2017-02-04 05:11:22.956774304 UTC)
<6>[ 6131.636444] healthd: battery l=73 v=4 t=31.2 h=2 st=4 chg=
<6>[ 6131.678344] batt: SMEM_BATT: get_batt_info: batt_id=1, batt_vol=4121, batt_temp=312, batt_current=-110, eval_current=0, level=73, charging_source=0, charging_enabled=0, full_bat=1500000, over_vchg=0 at 6129073168200 (2017-02-04 05:11:23.004320692 UTC)
<6>[ 6131.680755] batt: SMEM_BATT: get_batt_info: batt_id=1, batt_vol=4121, batt_temp=312, batt_current=-110, eval_current=0, level=73, charging_source=0, charging_enabled=0, full_bat=1500000, over_vchg=0 at 6129075548571 (2017-02-04 05:11:23.006762098 UTC)
<6>[ 6131.686004] healthd: battery l=73 v=4 t=31.2 h=2 st=4 chg=
<6>[ 6131.708709] batt: SMEM_BATT: get_batt_info: batt_id=1, batt_vol=4121, batt_temp=312, batt_current=-110, eval_current=0, level=73, charging_source=0, charging_enabled=0, full_bat=1500000, over_vchg=0 at 6129103136463 (2017-02-04 05:11:23.034685683 UTC)
<6>[ 6131.712921] batt: SMEM_BATT: get_batt_info: batt_id=1, batt_vol=4121, batt_temp=312, batt_current=-110, eval_current=0, level=73, charging_source=0, charging_enabled=0, full_bat=1500000, over_vchg=0 at 6129150255604 (2017-02-04 05:11:23.038897109 UTC)
<6>[ 6131.759704] healthd: battery l=73 v=4 t=31.2 h=2 st=4 chg=
<6>[ 6131.871734] gpio_keys_scan_keys: key 1-74, 0 (94) changed to 1
<6>[ 6131.932861] lightsensor_ioctl set value = 1
<6>[ 6131.933441] lightsensor_enable
<3>[ 6131.933929] lightsensor_enable: microp is suspended
<6>[ 6131.957580] __spi_bma150_set_mode: BMA get into NORMAL mode!
<6>[ 6132.025665] gpio_keys_scan_keys: key 1-74, 0 (94) continue debounce
<6>[ 6132.046752] gpio_keys_scan_keys: key 1-74, 0 (94) continue debounce
<6>[ 6132.067443] gpio_keys_scan_keys: key 1-74, 0 (94) changed to 0
<6>[ 6132.155609] request_suspend_state: wakeup (3->0) at 6129548815189 (2017-02-04 05:11:23.481554595 UTC)
<6>[ 6132.156890] [R] late_resume start
<6>[ 6132.243011] msmfb: pan_update in state(4)
<6>[ 6132.243072] msmfb: drawing while asleep
<6>[ 6132.257293] mddi_wait_interrupt 3405, timeout waiting for 4000, INT = 10, STAT = 10 gotint = 2a004
<6>[ 6132.342926] msmfb: pan_update in state(4)
<6>[ 6132.342956] msmfb: drawing while asleep
<6>[ 6132.357238] mddi_wait_interrupt 3405, timeout waiting for 20000, INT = 10, STAT = 10 gotint = a004
<7>[ 6132.357299] mddi_novatec_power: power on.
<6>[ 6132.440368] msmfb: pan_update in state(4)
<6>[ 6132.440368] msmfb: drawing while asleep
<6>[ 6132.539367] msmfb: pan_update in state(4)
<6>[ 6132.539398] msmfb: drawing while asleep
<6>[ 6132.616912] msmfb: ready, waiting for full update
<6>[ 6132.619476] msmfb: pan_update in state(1)
<6>[ 6132.619506] msmfb: full update starting
<6>[ 6132.639007] [CAM]ov8810_resume
<7>[ 6132.639282] __capella_cm3602_power: Turn the capella_cm3602 power on
<4>[ 6132.639617] [hdmi/fb]hdmifb_resume
<4>[ 6132.639984] [hdmi/lcdc]lcdc_resume
<4>[ 6132.640197] [hdmi/tx]hdmi_panel_init
<4>[ 6132.640411] [hdmi]suc_hdmi_gpio_on
<4>[ 6132.641143] [hdmi]hdmi_power(5)
<6>[ 6132.641479] [R] late_resume end
<6>[ 6132.648345] Touch Status: 0x01 0x10 0xEA 0xD8 0x09 
<6>[ 6132.654113] Touch Status: 
<6>[ 6132.654357] msmfb: full update completed
<4>[ 6132.654785] 0x01 0x00 0xEA 0xD8 0x09 
<6>[ 6132.656005] msmfb: turning on panel
<7>[ 6132.656249] supersonic_panel_unblank
<7>[ 6132.656463] turn on backlight
<7>[ 6132.656646] set brightness = 100
<6>[ 6132.696014] msmfb: pan_update in state(3)
<7>[ 6132.718170] set brightness = 89
<7>[ 6133.497467] ALS value: 0x0, level: 0 #
<7>[ 6133.617553] ALS value: 0x0, level: 0 #
<6>[ 6133.990570] S1@488,784
<6>[ 6134.260833] E1@973,696
<6>[ 6164.057434] check_calibration: calibration confirm
<6>[ 6170.062561] gpio_keys_scan_keys: key 1-74, 0 (94) changed to 1
<6>[ 6170.258148] gpio_keys_scan_keys: key 1-74, 0 (94) continue debounce
<6>[ 6170.279174] gpio_keys_scan_keys: key 1-74, 0 (94) continue debounce
<6>[ 6170.299804] gpio_keys_scan_keys: key 1-74, 0 (94) changed to 0
<6>[ 6170.304687] lightsensor_ioctl set value = 0
<6>[ 6170.305236] lightsensor_disable
<7>[ 6170.963989] set brightness = 0
<4>[ 6171.082397] dhd_set_suspend: force extra Suspend setting 
<4>[ 6171.093383] dhd_get_dtim_skip bcn_li_dtim=3 DTIM=3 Listen=10
<6>[ 6171.137268] __spi_bma150_set_mode: BMA get into SLEEP mode!
<6>[ 6171.418121] request_suspend_state: sleep (0->3) at 6168811357917 (2017-02-04 05:12:02.744127841 UTC)
<6>[ 6171.418182] [R] early_suspend start
<6>[ 6171.497558] __spi_bma150_set_mode: BMA get into SLEEP mode!
<7>[ 6171.497955] bma150_early_suspend: spi_bma150_set_mode returned = 0!
<7>[ 6171.516113] supersonic_panel_blank
<7>[ 6171.516479] set brightness = 0
<4>[ 6171.517333] [hdmi/fb]hdmifb_suspend, use_count=0
<4>[ 6171.517578] [hdmi/fb]hdmifb_suspend: hdmifb_suspending = true
<4>[ 6171.517974] [hdmi/lcdc]lcdc_suspend
<4>[ 6171.518188] [hdmi/tx]hdmi_panel_uninit
<4>[ 6171.518554] [hdmi]suc_hdmi_gpio_off
<4>[ 6171.519104] [hdmi/tx]suspending=true, disable timer
<4>[ 6171.519348] [hdmi/tx]hdmi_panel_uninit
<4>[ 6171.519714] [hdmi/tx]hdmi_standby
<4>[ 6171.519927] [hdmi]hdmi_power(4)
<4>[ 6171.520141] [hdmi/lcdc]lcdc_disable_video, blank_count=0
<7>[ 6171.520568] __capella_cm3602_power: Turn the capella_cm3602 power off
<6>[ 6171.526000] atmel_ts_suspend: enter
<7>[ 6171.532043] mddi_novatec_power: power off.
<6>[ 6171.657379] [R] early_suspend: sync
<6>[ 6171.805572] [R] early_suspend end
<6>[ 6171.888427] PM: Syncing filesystems ... done.
<4>[ 6171.890289] Freezing user space processes ... (elapsed 0.02 seconds) done.
<4>[ 6171.917633] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
<4>[ 6171.946166] msmsdcc_suspend enter
<6>[ 6171.946533] supersonic_sdslot_switchvdd: Disabling SD slot power
<4>[ 6171.947265] msmsdcc_suspend leave
<4>[ 6171.947509] msmsdcc_suspend enter
<4>[ 6171.947875] msmsdcc_suspend leave
<4>[ 6171.948089] msmsdcc_suspend enter
<4>[ 6171.948364] msmsdcc_suspend leave
<6>[ 6171.949035] PM: suspend of devices complete after 10.375 msecs
<6>[ 6171.950225] PM: late suspend of devices complete after 0.793 msecs
<6>[ 6171.950225] clocks on: uart_clk
<6>[ 6171.950225] [R] suspend end
<6>[ 6171.950225] [R] resume start
<6>[ 6171.951080] PM: early resume of devices complete after 0.915 msecs
<4>[ 6171.951995] msmsdcc_resume enter
<4>[ 6171.952514] msmsdcc_resume enter
<6>[ 6171.952789] mmc1: Enable clocks
<4>[ 6171.953216] mmc_wimax_enable_host_wakeup mmc_wimax_sdio_status is OFF
<4>[ 6171.957092] msmsdcc_resume enter
<6>[ 6171.967437] PM: resume of devices complete after 15.624 msecs
<4>[ 6171.968872] Restarting tasks ... done.
<6>[ 6171.992553] wakeup wake lock:
<6>[ 6171.994354] suspend: exit suspend, ret = 0 (2017-02-04 05:12:33.028769611 UTC)
<6>[ 6172.013610] PM: Syncing filesystems ... done.
<4>[ 6172.018096] Freezing user space processes ... (elapsed 0.01 seconds) done.
<4>[ 6172.037780] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
<4>[ 6172.071044] msmsdcc_suspend enter
<4>[ 6172.071472] msmsdcc_suspend leave
<4>[ 6172.071746] msmsdcc_suspend enter
<6>[ 6172.072204] mmc1: Disable clocks in msmsdcc_suspend
<4>[ 6172.072631] msmsdcc_suspend leave
<4>[ 6172.072906] msmsdcc_suspend enter
<4>[ 6172.073455] msmsdcc_suspend leave
<6>[ 6172.074005] PM: suspend of devices complete after 15.249 msecs
<6>[ 6172.075408] PM: late suspend of devices complete after 0.884 msecs
<6>[ 6172.075408] clocks on: uart_clk
<6>[ 6172.075408] [R] suspend end
<6>[ 6172.075408] [R] resume start
<6>[ 6172.076385] PM: early resume of devices complete after 1.036 msecs
<4>[ 6172.077148] msmsdcc_resume enter
<4>[ 6172.077789] msmsdcc_resume enter
<6>[ 6172.078063] mmc1: Enable clocks
<4>[ 6172.078338] mmc_wimax_enable_host_wakeup mmc_wimax_sdio_status is OFF
<4>[ 6172.080291] msmsdcc_resume enter
<6>[ 6172.091339] PM: resume of devices complete after 14.364 msecs
<4>[ 6172.092742] Restarting tasks ... done.
<6>[ 6172.109039] wakeup wake lock: alarm_rtc
<6>[ 6172.109710] suspend: exit suspend, ret = 0 (2017-02-04 05:12:54.022047743 UTC)
<6>[ 6172.681610] PM: Syncing filesystems ... done.
<4>[ 6172.684173] Freezing user space processes ... (elapsed 0.03 seconds) done.
<4>[ 6172.717468] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
<4>[ 6172.751007] msmsdcc_suspend enter
<4>[ 6172.751434] msmsdcc_suspend leave
<4>[ 6172.751708] msmsdcc_suspend enter
<6>[ 6172.752014] mmc1: Disable clocks in msmsdcc_suspend
<4>[ 6172.752624] msmsdcc_suspend leave
<4>[ 6172.752899] msmsdcc_suspend enter
<4>[ 6172.753265] msmsdcc_suspend leave
<6>[ 6172.753997] PM: suspend of devices complete after 15.129 msecs
<6>[ 6172.755218] PM: late suspend of devices complete after 0.884 msecs
<6>[ 6172.755218] clocks on: uart_clk
<6>[ 6172.755218] [R] suspend end
<6>[ 6172.755218] [R] resume start
<6>[ 6172.756164] PM: early resume of devices complete after 0.915 msecs
<4>[ 6172.756866] msmsdcc_resume enter
<4>[ 6172.757354] msmsdcc_resume enter
<6>[ 6172.757781] mmc1: Enable clocks
<4>[ 6172.758056] mmc_wimax_enable_host_wakeup mmc_wimax_sdio_status is OFF
<4>[ 6172.761444] msmsdcc_resume enter
<6>[ 6172.773468] PM: resume of devices complete after 16.744 msecs
<4>[ 6172.774780] Restarting tasks ... done.
<6>[ 6172.792510] wakeup wake lock: wlan_wake
<6>[ 6172.793182] suspend: exit suspend, ret = 0 (2017-02-04 05:12:55.021528164 UTC)
<6>[ 6173.756256] mmc1: Bus clock timer expired
<4>[ 6173.756561] mmc_wimax_enable_host_wakeup mmc_wimax_sdio_status is OFF
<6>[ 6173.756866] mmc1: Disable clocks
<6>[ 6173.799560] PM: Syncing filesystems ... done.
<4>[ 6173.803802] Freezing user space processes ... (elapsed 0.04 seconds) done.
<4>[ 6173.847717] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
<4>[ 6173.886779] msmsdcc_suspend enter
<4>[ 6173.887695] msmsdcc_suspend leave
<4>[ 6173.888214] msmsdcc_suspend enter
<4>[ 6173.888702] msmsdcc_suspend leave
<4>[ 6173.889587] msmsdcc_suspend enter
<4>[ 6173.890075] msmsdcc_suspend leave
<6>[ 6173.891235] PM: suspend of devices complete after 20.594 msecs
<6>[ 6173.894042] PM: late suspend of devices complete after 1.891 msecs
<6>[ 6173.894042] clocks on: uart_clk
<6>[ 6173.894042] [R] suspend end
<6>[ 6173.894042] [R] resume start
<6>[ 6173.895874] PM: early resume of devices complete after 1.861 msecs
<4>[ 6173.897460] msmsdcc_resume enter
<4>[ 6173.898193] msmsdcc_resume enter
<6>[ 6173.898681] mmc1: Enable clocks
<4>[ 6173.899169] mmc_wimax_enable_host_wakeup mmc_wimax_sdio_status is OFF
<4>[ 6173.900329] msmsdcc_resume enter
<6>[ 6173.910858] PM: resume of devices complete after 13.728 msecs
<4>[ 6173.913970] Restarting tasks ... done.
<6>[ 6173.937286] wakeup wake lock: alarm_rtc alarm
<6>[ 6173.939056] suspend: exit suspend, ret = 0 (2017-02-04 05:15:00.030713196 UTC)
<6>[ 6174.896453] mmc1: Bus clock timer expired
<4>[ 6174.897003] mmc_wimax_enable_host_wakeup mmc_wimax_sdio_status is OFF
<6>[ 6174.897949] mmc1: Disable clocks
<6>[ 6174.909393] PM: Syncing filesystems ... done.
<4>[ 6174.913970] Freezing user space processes ... 
<3>[ 6174.922821] Freezing of user space  aborted
<4>[ 6174.925170] 
<4>[ 6174.931365] Restarting tasks ... done.
<6>[ 6174.939849] wakeup wake lock:
<6>[ 6174.940795] suspend: exit suspend, ret = -16 (2017-02-04 05:15:01.032858108 UTC)
<6>[ 6175.724639] PM: Syncing filesystems ... done.
<4>[ 6176.024780] Freezing user space processes ... (elapsed 0.02 seconds) done.
<4>[ 6176.046722] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
<4>[ 6176.075164] msmsdcc_suspend enter
<4>[ 6176.075561] msmsdcc_suspend leave
<4>[ 6176.075775] msmsdcc_suspend enter
<4>[ 6176.076110] msmsdcc_suspend leave
<4>[ 6176.076477] msmsdcc_suspend enter
<4>[ 6176.076690] msmsdcc_suspend leave
<6>[ 6176.077178] PM: suspend of devices complete after 9.337 msecs
<6>[ 6176.078338] PM: late suspend of devices complete after 0.762 msecs
<6>[ 6176.078338] clocks on: uart_clk
<6>[ 6176.078338] [R] suspend end
<6>[ 6176.078338] [R] resume start
<6>[ 6176.079193] PM: early resume of devices complete after 0.915 msecs
<4>[ 6176.080108] msmsdcc_resume enter
<4>[ 6176.080657] msmsdcc_resume enter
<6>[ 6176.080932] mmc1: Enable clocks
<4>[ 6176.081176] mmc_wimax_enable_host_wakeup mmc_wimax_sdio_status is OFF
<4>[ 6176.081909] msmsdcc_resume enter
<6>[ 6176.089843] PM: resume of devices complete after 9.887 msecs
<4>[ 6176.091308] Restarting tasks ... done.
<6>[ 6176.108795] wakeup wake lock: alarm_rtc
<6>[ 6176.109497] suspend: exit suspend, ret = 0 (2017-02-04 05:20:16.022306420 UTC)
<6>[ 6176.702545] PM: Syncing filesystems ... done.
<4>[ 6176.896789] Freezing user space processes ... 
<3>[ 6176.902038] Freezing of user space  aborted
<4>[ 6176.903717] 
<4>[ 6176.903961] Restarting tasks ... done.
<6>[ 6176.909179] wakeup wake lock:
<6>[ 6176.909637] suspend: exit suspend, ret = -16 (2017-02-04 05:20:16.822350685 UTC)
<6>[ 6177.076049] mmc1: Bus clock timer expired
<4>[ 6177.076354] mmc_wimax_enable_host_wakeup mmc_wimax_sdio_status is OFF
<6>[ 6177.076690] mmc1: Disable clocks
<6>[ 6197.872955] PM: Syncing filesystems ... done.
<4>[ 6198.211608] Freezing user space processes ... (elapsed 0.02 seconds) done.
<4>[ 6198.237091] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
<4>[ 6198.265472] msmsdcc_suspend enter
<4>[ 6198.265869] msmsdcc_suspend leave
<4>[ 6198.266082] msmsdcc_suspend enter
<4>[ 6198.266418] msmsdcc_suspend leave
<4>[ 6198.266784] msmsdcc_suspend enter
<4>[ 6198.266998] msmsdcc_suspend leave
<6>[ 6198.267486] PM: suspend of devices complete after 9.368 msecs
<6>[ 6198.268646] PM: late suspend of devices complete after 0.793 msecs
<6>[ 6198.268646] clocks on: uart_clk
<6>[ 6198.268646] [R] suspend end
<6>[ 6198.268646] [R] resume start
<6>[ 6198.269500] PM: early resume of devices complete after 0.915 msecs
<4>[ 6198.270233] msmsdcc_resume enter
<4>[ 6198.270935] msmsdcc_resume enter
<6>[ 6198.271209] mmc1: Enable clocks
<4>[ 6198.271453] mmc_wimax_enable_host_wakeup mmc_wimax_sdio_status is OFF
<4>[ 6198.272186] msmsdcc_resume enter
<6>[ 6198.284454] PM: resume of devices complete after 14.373 msecs
<4>[ 6198.285980] Restarting tasks ... done.
<6>[ 6198.303375] wakeup wake lock: alarm_rtc alarm
<6>[ 6198.304260] suspend: exit suspend, ret = 0 (2017-02-04 05:21:16.022794638 UTC)
<6>[ 6198.537536] PM: Syncing filesystems ... done.
<4>[ 6198.540069] Freezing user space processes ... (elapsed 0.01 seconds) done.
<4>[ 6198.557281] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
<4>[ 6198.590789] msmsdcc_suspend enter
<4>[ 6198.591247] msmsdcc_suspend leave
<4>[ 6198.591522] msmsdcc_suspend enter
<6>[ 6198.591979] mmc1: Disable clocks in msmsdcc_suspend
<4>[ 6198.592407] msmsdcc_suspend leave
<4>[ 6198.592681] msmsdcc_suspend enter
<4>[ 6198.593200] msmsdcc_suspend leave
<6>[ 6198.593780] PM: suspend of devices complete after 15.252 msecs
<6>[ 6198.595001] PM: late suspend of devices complete after 0.884 msecs
<6>[ 6198.595001] clocks on: uart_clk
<6>[ 6198.595001] [R] suspend end
<6>[ 6198.595001] [R] resume start
<6>[ 6198.595947] PM: early resume of devices complete after 1.006 msecs
<4>[ 6198.596679] msmsdcc_resume enter
<4>[ 6198.597381] msmsdcc_resume enter
<6>[ 6198.597808] mmc1: Enable clocks
<4>[ 6198.598083] mmc_wimax_enable_host_wakeup mmc_wimax_sdio_status is OFF
<4>[ 6198.599884] msmsdcc_resume enter
<6>[ 6198.610778] PM: resume of devices complete after 14.244 msecs
<4>[ 6198.612091] Restarting tasks ... done.
<6>[ 6198.630157] wakeup wake lock:
<6>[ 6198.630615] suspend: exit suspend, ret = 0 (2017-02-04 05:24:01.023329823 UTC)
<6>[ 6199.596374] mmc1: Bus clock timer expired
<4>[ 6199.596679] mmc_wimax_enable_host_wakeup mmc_wimax_sdio_status is OFF
<6>[ 6199.597167] mmc1: Disable clocks
<6>[ 6203.721038] PM: Syncing filesystems ... done.
<4>[ 6203.727081] Freezing user space processes ... (elapsed 0.02 seconds) done.
<4>[ 6203.757843] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
<4>[ 6203.796234] msmsdcc_suspend enter
<4>[ 6203.797119] msmsdcc_suspend leave
<4>[ 6203.797607] msmsdcc_suspend enter
<4>[ 6203.798126] msmsdcc_suspend leave
<4>[ 6203.798980] msmsdcc_suspend enter
<4>[ 6203.799468] msmsdcc_suspend leave
<6>[ 6203.800628] PM: suspend of devices complete after 20.172 msecs
<6>[ 6203.803436] PM: late suspend of devices complete after 1.922 msecs
<6>[ 6203.803436] clocks on: uart_clk
<6>[ 6203.803436] [R] suspend end
<6>[ 6203.803436] [R] resume start
<6>[ 6203.805145] PM: early resume of devices complete after 1.647 msecs
<4>[ 6203.806884] msmsdcc_resume enter
<4>[ 6203.807617] msmsdcc_resume enter
<6>[ 6203.808105] mmc1: Enable clocks
<4>[ 6203.808593] mmc_wimax_enable_host_wakeup mmc_wimax_sdio_status is OFF
<4>[ 6203.809936] msmsdcc_resume enter
<6>[ 6203.819152] PM: resume of devices complete after 12.634 msecs
<4>[ 6203.822265] Restarting tasks ... done.
<6>[ 6203.846038] wakeup wake lock: wlan_wake event0-445 event4-445 alarm
<6>[ 6203.848602] suspend: exit suspend, ret = 0 (2017-02-04 05:25:30.030059813 UTC)
<3>[ 6203.857330] CFG80211-ERROR) wl_notify_connect_status : link down, calling cfg80211_disconnected with deauth_reason:0
<6>[ 6203.871582] cfg80211: Calling CRDA to update world regulatory domain
<6>[ 6204.805664] mmc1: Bus clock timer expired
<4>[ 6204.805908] mmc_wimax_enable_host_wakeup mmc_wimax_sdio_status is OFF
<6>[ 6204.806304] mmc1: Disable clocks
<4>[ 6221.231140] connect failed event=0 e->status 0x1
<3>[ 6221.231750] CFG80211-ERROR) wl_bss_connect_done : Report connect result - connection failed
<4>[ 6223.484344] connect failed event=0 e->status 0x1
<3>[ 6223.485290] CFG80211-ERROR) wl_bss_connect_done : Report connect result - connection failed
<4>[ 6225.332946] connect failed event=0 e->status 0x3
<3>[ 6225.333892] CFG80211-ERROR) wl_bss_connect_done : Report connect result - connection failed
<3>[ 6235.123870] CFG80211-ERROR) wl_notify_pfn_status :  PNO Event
<6>[ 6235.142028] cfg80211: Calling CRDA to update world regulatory domain
<4>[ 6247.556457] connect failed event=0 e->status 0x1
<3>[ 6247.557067] CFG80211-ERROR) wl_bss_connect_done : Report connect result - connection failed
<6>[ 6264.334960] PM: Syncing filesystems ... done.
<4>[ 6264.339477] Freezing user space processes ... (elapsed 0.03 seconds) done.
<4>[ 6264.377746] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
<4>[ 6264.416107] msmsdcc_suspend enter
<4>[ 6264.416992] msmsdcc_suspend leave
<4>[ 6264.417510] msmsdcc_suspend enter
<4>[ 6264.418029] msmsdcc_suspend leave
<4>[ 6264.418518] msmsdcc_suspend enter
<4>[ 6264.419403] msmsdcc_suspend leave
<6>[ 6264.420562] PM: suspend of devices complete after 20.263 msecs
<6>[ 6264.423400] PM: late suspend of devices complete after 1.922 msecs
<6>[ 6264.423400] clocks on: uart_clk
<6>[ 6264.423400] [R] suspend end
<6>[ 6264.423400] [R] resume start
<6>[ 6264.425231] PM: early resume of devices complete after 1.922 msecs
<4>[ 6264.426483] msmsdcc_resume enter
<4>[ 6264.427581] msmsdcc_resume enter
<6>[ 6264.428070] mmc1: Enable clocks
<4>[ 6264.428558] mmc_wimax_enable_host_wakeup mmc_wimax_sdio_status is OFF
<4>[ 6264.429687] msmsdcc_resume enter
<6>[ 6264.439849] PM: resume of devices complete after 13.701 msecs
<4>[ 6264.442993] Restarting tasks ... done.
<6>[ 6264.466186] wakeup wake lock: alarm_rtc alarm
<6>[ 6264.467987] suspend: exit suspend, ret = 0 (2017-02-04 05:40:24.030445311 UTC)
<6>[ 6265.425598] mmc1: Bus clock timer expired
<4>[ 6265.425842] mmc_wimax_enable_host_wakeup mmc_wimax_sdio_status is OFF
<6>[ 6265.426239] mmc1: Disable clocks
<6>[ 6265.437072] PM: Syncing filesystems ... done.
<4>[ 6265.439086] Freezing user space processes ... (elapsed 0.01 seconds) done.
<4>[ 6265.456329] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
<3>[ 6265.481964] pm_op(): platform_pm_suspend+0x0/0x5c returns -16
<3>[ 6265.482238] PM: Device alarm failed to suspend: error -16
<3>[ 6265.482635] PM: Some devices failed to suspend
<6>[ 6265.483032] PM: resume of devices complete after 0.183 msecs
<4>[ 6265.484283] Restarting tasks ... done.
<6>[ 6265.489624] wakeup wake lock:
<6>[ 6265.490020] suspend: exit suspend, ret = -16 (2017-02-04 05:40:25.053450567 UTC)
<6>[ 6265.933929] PM: Syncing filesystems ... done.
<4>[ 6266.086914] Freezing user space processes ... 
<3>[ 6266.090759] Freezing of user space  aborted
<4>[ 6266.091857] 
<4>[ 6266.092041] Restarting tasks ... done.
<6>[ 6266.095458] wakeup wake lock:
<6>[ 6266.095977] suspend: exit suspend, ret = -16 (2017-02-04 05:40:25.659176699 UTC)
<6>[ 6267.678894] PM: Syncing filesystems ... done.
<4>[ 6267.680938] Freezing user space processes ... (elapsed 0.02 seconds) done.
<4>[ 6267.706420] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
<4>[ 6267.734802] msmsdcc_suspend enter
<4>[ 6267.735046] msmsdcc_suspend leave
<4>[ 6267.735412] msmsdcc_suspend enter
<4>[ 6267.735748] msmsdcc_suspend leave
<4>[ 6267.735961] msmsdcc_suspend enter
<4>[ 6267.736175] msmsdcc_suspend leave
<6>[ 6267.736663] PM: suspend of devices complete after 9.155 msecs
<6>[ 6267.737701] PM: late suspend of devices complete after 0.793 msecs
<6>[ 6267.737701] clocks on: uart_clk
<6>[ 6267.737701] [R] suspend end
<6>[ 6267.737701] [R] resume start
<6>[ 6267.738586] PM: early resume of devices complete after 0.823 msecs
<4>[ 6267.739440] msmsdcc_resume enter
<4>[ 6267.740173] msmsdcc_resume enter
<6>[ 6267.740600] mmc1: Enable clocks
<4>[ 6267.740875] mmc_wimax_enable_host_wakeup mmc_wimax_sdio_status is OFF
<4>[ 6267.741577] msmsdcc_resume enter
<6>[ 6267.749267] PM: resume of devices complete after 10.009 msecs
<4>[ 6267.750518] Restarting tasks ... done.
<6>[ 6267.768432] wakeup wake lock: gpio_input
<6>[ 6267.769104] suspend: exit suspend, ret = 0 (2017-02-04 05:45:53.021484225 UTC)
<6>[ 6267.779205] gpio_keys_scan_keys: key 1-74, 0 (94) changed to 1
<6>[ 6267.784851] lightsensor_ioctl set value = 1
<6>[ 6267.810089] lightsensor_enable
<3>[ 6267.810394] lightsensor_enable: microp is suspended
<6>[ 6267.921386] request_suspend_state: wakeup (3->0) at 6265316266892 (2017-02-04 05:45:53.174323554 UTC)
<6>[ 6267.922027] [R] late_resume start
<6>[ 6267.989746] msmfb: pan_update in state(4)
<6>[ 6267.989776] msmfb: drawing while asleep
<6>[ 6267.992523] gpio_keys_scan_keys: key 1-74, 0 (94) continue debounce
<6>[ 6268.006134] __spi_bma150_set_mode: BMA get into NORMAL mode!
<6>[ 6268.012634] gpio_keys_scan_keys: key 1-74, 0 (94) changed to 0
<6>[ 6268.015380] mddi_wait_interrupt 5548, timeout waiting for 4000, INT = 4044002, STAT = 4044002 gotint = 2a004
<6>[ 6268.092224] msmfb: pan_update in state(4)
<6>[ 6268.092224] msmfb: drawing while asleep
<6>[ 6268.115509] mddi_wait_interrupt 5548, timeout waiting for 20000, INT = 8, STAT = 8 gotint = a004
<7>[ 6268.115570] mddi_novatec_power: power on.
<6>[ 6268.193481] msmfb: pan_update in state(4)
<6>[ 6268.193511] msmfb: drawing while asleep
<6>[ 6268.289703] msmfb: pan_update in state(4)
<6>[ 6268.289703] msmfb: drawing while asleep
<6>[ 6268.375823] msmfb: ready, waiting for full update
<6>[ 6268.379638] msmfb: pan_update in state(1)
<6>[ 6268.379669] msmfb: full update starting
<6>[ 6268.398223] [CAM]ov8810_resume
<7>[ 6268.398529] __capella_cm3602_power: Turn the capella_cm3602 power on
<4>[ 6268.399047] [hdmi/fb]hdmifb_resume
<4>[ 6268.399261] [hdmi/lcdc]lcdc_resume
<4>[ 6268.399475] [hdmi/tx]hdmi_panel_init
<4>[ 6268.399841] [hdmi]suc_hdmi_gpio_on
<4>[ 6268.400390] [hdmi]hdmi_power(5)
<6>[ 6268.400787] [R] late_resume end
<6>[ 6268.401428] msmfb: pan_update in state(3)
<6>[ 6268.406311] Touch Status: 0x01 0x10 0xEA 0xD8 0x09 
<6>[ 6268.412017] Touch Status: 0x01 0x00 0xEA 0xD8 0x09 
<6>[ 6268.414611] msmfb: full update completed
<6>[ 6268.414733] msmfb: turning on panel
<7>[ 6268.414733] supersonic_panel_unblank
<7>[ 6268.414764] turn on backlight
<7>[ 6268.414764] set brightness = 100
<7>[ 6268.450225] set brightness = 89
<6>[ 6268.735443] mmc1: Bus clock timer expired
<4>[ 6268.735717] mmc_wimax_enable_host_wakeup mmc_wimax_sdio_status is OFF
<6>[ 6268.735931] mmc1: Disable clocks
<4>[ 6269.053283] wl_bss_connect_done succeeded
<4>[ 6269.185546] wl_bss_connect_done succeeded
<6>[ 6269.228454] S1@576,765
<7>[ 6269.256561] ALS value: 0x0, level: 0 #
<7>[ 6269.376861] ALS value: 0x0, level: 0 #
<6>[ 6269.558776] E1@947,744
<6>[ 6270.413146] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
<4>[ 6270.735778] Unknown PRIVATE command WLS_BATCHING GET - ignored
<4>[ 6270.743682] Unknown PRIVATE command WLS_BATCHING STOP - ignored
<6>[ 6270.848114] check_calibration: calibration confirm
<7>[ 6281.975646] wlan0: no IPv6 routers present
<3>[ 6301.063476] CFG80211-ERROR) wl_notify_connect_status : Received WLC_E_DISASSOC_IND event with reason code: 7
<3>[ 6301.065795] CFG80211-ERROR) wl_notify_connect_status : link down, calling cfg80211_disconnected with deauth_reason:7
<3>[ 6301.066162] CFG80211-ERROR) wl_notify_connect_status : Received WLC_E_DEAUTH_IND event with reason code: 6
<6>[ 6301.070281] cfg80211: Calling CRDA to update world regulatory domain
<4>[ 6301.215118] connect failed event=0 e->status 0x3
<3>[ 6301.215332] CFG80211-ERROR) wl_bss_connect_done : Report connect result - connection failed
<4>[ 6302.473022] wl_bss_connect_done succeeded
<4>[ 6302.568878] wl_bss_connect_done succeeded
<6>[ 6302.731109] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
<4>[ 6303.037628] Unknown PRIVATE command WLS_BATCHING GET - ignored
<4>[ 6303.042388] Unknown PRIVATE command WLS_BATCHING STOP - ignored
<7>[ 6314.655792] wlan0: no IPv6 routers present
<6>[ 6361.132751] batt: SMEM_BATT: get_batt_info: batt_id=1, batt_vol=3944, batt_temp=254, batt_current=0, eval_current=234, level=73, charging_source=0, charging_enabled=0, full_bat=1500000, over_vchg=0 at 6358527589036 (2017-02-04 05:47:26.385187934 UTC)
<6>[ 6361.133544] batt: SMEM_BATT: get_batt_info: batt_id=1, batt_vol=3944, batt_temp=254, batt_current=0, eval_current=234, level=73, charging_source=0, charging_enabled=0, full_bat=1500000, over_vchg=0 at 6358528657151 (2017-02-04 05:47:26.385981391 UTC)
<6>[ 6361.137390] healthd: battery l=73 v=3 t=25.4 h=2 st=4 chg=
<3>[ 6413.710815] CFG80211-ERROR) wl_notify_connect_status : Received WLC_E_DEAUTH_IND event with reason code: 6
<3>[ 6413.713439] CFG80211-ERROR) wl_notify_connect_status : link down, calling cfg80211_disconnected with deauth_reason:6
<6>[ 6413.717437] cfg80211: Calling CRDA for country: CN
<3>[ 6413.772399] CFG80211-ERROR) wl_notify_connect_status : Received WLC_E_DEAUTH_IND event with reason code: 6
<4>[ 6413.773437] link down, during connecting
<3>[ 6413.774078] CFG80211-ERROR) wl_bss_connect_done : Report connect result - connection failed
<4>[ 6414.091705] wl_bss_connect_done succeeded
<4>[ 6414.184143] wl_bss_connect_done succeeded
<4>[ 6415.034149] wl_bss_connect_done succeeded
<4>[ 6415.106018] wl_bss_connect_done succeeded
<6>[ 6415.334503] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
<4>[ 6415.672241] Unknown PRIVATE command WLS_BATCHING GET - ignored
<4>[ 6415.677551] Unknown PRIVATE command WLS_BATCHING STOP - ignored
<7>[ 6426.405639] wlan0: no IPv6 routers present
<6>[ 6473.781463] batt: SMEM_BATT: get_batt_info: batt_id=1, batt_vol=3940, batt_temp=276, batt_current=0, eval_current=204, level=73, charging_source=0, charging_enabled=0, full_bat=1500000, over_vchg=0 at 6471176301194 (2017-02-04 05:49:19.033900093 UTC)
<6>[ 6473.782257] batt: SMEM_BATT: get_batt_info: batt_id=1, batt_vol=3940, batt_temp=276, batt_current=0, eval_current=204, level=73, charging_source=0, charging_enabled=0, full_bat=1500000, over_vchg=0 at 6471177064134 (2017-02-04 05:49:19.034693550 UTC)
<6>[ 6473.783386] healthd: battery l=73 v=3 t=27.6 h=2 st=4 chg=
<7>[ 6490.840148] set brightness = 86
<7>[ 6490.856811] set brightness = 83
<7>[ 6490.873413] set brightness = 80
<7>[ 6490.890197] set brightness = 76
<7>[ 6490.906860] set brightness = 73
<7>[ 6490.923248] set brightness = 70
<7>[ 6490.940032] set brightness = 66
<7>[ 6490.956909] set brightness = 63
<7>[ 6490.978210] set brightness = 60
<7>[ 6490.992187] set brightness = 56
<7>[ 6491.006774] set brightness = 53
<7>[ 6491.023437] set brightness = 50
<7>[ 6491.040069] set brightness = 46
<7>[ 6491.064727] set brightness = 43
<7>[ 6491.073364] set brightness = 40
<7>[ 6491.090087] set brightness = 36
<7>[ 6491.106719] set brightness = 33
<7>[ 6491.123840] set brightness = 30
<7>[ 6491.140136] set brightness = 26
<7>[ 6491.156707] set brightness = 23
<7>[ 6491.177886] set brightness = 20
<7>[ 6491.191833] set brightness = 16
<7>[ 6491.207153] set brightness = 13
<7>[ 6491.223175] set brightness = 10
<7>[ 6492.157104] set brightness = 13
<7>[ 6492.179138] set brightness = 17
<7>[ 6492.194091] set brightness = 20
<7>[ 6492.215148] set brightness = 23
<7>[ 6492.238555] set brightness = 27
<7>[ 6492.275421] set brightness = 37
<7>[ 6492.299407] set brightness = 40
<7>[ 6492.333984] set brightness = 47
<7>[ 6492.353149] set brightness = 50
<7>[ 6492.396759] set brightness = 60
<7>[ 6492.430755] set brightness = 63
<7>[ 6492.449981] set brightness = 70
<7>[ 6492.467681] set brightness = 73
<7>[ 6492.488006] set brightness = 77
<7>[ 6492.508239] set brightness = 83
<7>[ 6492.534240] set brightness = 87
<7>[ 6492.554229] set brightness = 89
<6>[ 6533.856658] batt: SMEM_BATT: get_batt_info: batt_id=1, batt_vol=3939, batt_temp=276, batt_current=0, eval_current=208, level=73, charging_source=0, charging_enabled=0, full_bat=1500000, over_vchg=0 at 6531251618577 (2017-02-04 05:50:19.109095405 UTC)
<6>[ 6533.857452] batt: SMEM_BATT: get_batt_info: batt_id=1, batt_vol=3939, batt_temp=276, batt_current=0, eval_current=208, level=73, charging_source=0, charging_enabled=0, full_bat=1500000, over_vchg=0 at 6531252381517 (2017-02-04 05:50:19.109919380 UTC)
<6>[ 6533.858551] healthd: battery l=73 v=3 t=27.6 h=2 st=4 chg=
<4>[ 6574.245697] mmc2: Starting deferred resume
<6>[ 6574.251647] supersonic_sdslot_switchvdd: Setting level to 2850 (Success)
<6>[ 6574.528656] mmc2: Deferred resume completed
<6>[ 6593.916198] batt: SMEM_BATT: get_batt_info: batt_id=1, batt_vol=3927, batt_temp=285, batt_current=0, eval_current=226, level=73, charging_source=0, charging_enabled=0, full_bat=1500000, over_vchg=0 at 6591311127856 (2017-02-04 05:51:19.168635202 UTC)
<6>[ 6593.916992] batt: SMEM_BATT: get_batt_info: batt_id=1, batt_vol=3927, batt_temp=285, batt_current=0, eval_current=226, level=73, charging_source=0, charging_enabled=0, full_bat=1500000, over_vchg=0 at 6591311921313 (2017-02-04 05:51:19.169459177 UTC)
<6>[ 6593.920166] healthd: battery l=73 v=3 t=28.5 h=2 st=4 chg=
<6>[ 6653.987060] batt: SMEM_BATT: get_batt_info: batt_id=1, batt_vol=3967, batt_temp=293, batt_current=0, eval_current=126, level=73, charging_source=0, charging_enabled=0, full_bat=1500000, over_vchg=0 at 6651382996753 (2017-02-04 05:52:19.239466501 UTC)
<6>[ 6653.989471] batt: SMEM_BATT: get_batt_info: batt_id=1, batt_vol=3967, batt_temp=293, batt_current=0, eval_current=126, level=73, charging_source=0, charging_enabled=0, full_bat=1500000, over_vchg=0 at 6651385377124 (2017-02-04 05:52:19.241907907 UTC)
<6>[ 6653.993194] healthd: battery l=73 v=3 t=29.3 h=2 st=4 chg=
<6>[ 6714.086944] batt: SMEM_BATT: get_batt_info: batt_id=1, batt_vol=3974, batt_temp=296, batt_current=0, eval_current=110, level=73, charging_source=0, charging_enabled=0, full_bat=1500000, over_vchg=0 at 6711482545092 (2017-02-04 05:53:19.339381051 UTC)
<6>[ 6714.089355] batt: SMEM_BATT: get_batt_info: batt_id=1, batt_vol=3974, batt_temp=296, batt_current=0, eval_current=110, level=73, charging_source=0, charging_enabled=0, full_bat=1500000, over_vchg=0 at 6711484925463 (2017-02-04 05:53:19.341791940 UTC)
<6>[ 6714.092926] healthd: battery l=73 v=3 t=29.6 h=2 st=4 chg=
<7>[ 6734.459533] set brightness = 87
<7>[ 6734.475402] set brightness = 83
<7>[ 6734.492034] set brightness = 80
<7>[ 6734.508880] set brightness = 77
<7>[ 6734.525360] set brightness = 73
<7>[ 6734.542053] set brightness = 70
<7>[ 6734.558898] set brightness = 67
<7>[ 6734.575927] set brightness = 63
<7>[ 6734.592041] set brightness = 60
<7>[ 6734.608886] set brightness = 57
<7>[ 6734.625396] set brightness = 53
<7>[ 6734.642059] set brightness = 50
<7>[ 6734.658843] set brightness = 47
<7>[ 6734.675354] set brightness = 43
<7>[ 6734.692077] set brightness = 40
<7>[ 6734.708892] set brightness = 37
<7>[ 6734.725402] set brightness = 33
<7>[ 6734.742065] set brightness = 30
<7>[ 6734.758819] set brightness = 27
<7>[ 6734.775512] set brightness = 23
<7>[ 6734.792083] set brightness = 20
<7>[ 6734.808929] set brightness = 17
<7>[ 6734.825408] set brightness = 13
<7>[ 6734.841217] set brightness = 10
<6>[ 6741.450317] lightsensor_ioctl set value = 0
<6>[ 6741.450866] lightsensor_disable
<7>[ 6742.248962] set brightness = 0
<4>[ 6742.277496] dhd_set_suspend: force extra Suspend setting 
<4>[ 6742.282958] dhd_get_dtim_skip bcn_li_dtim=3 DTIM=3 Listen=10
<6>[ 6742.366180] __spi_bma150_set_mode: BMA get into SLEEP mode!
<6>[ 6742.476348] request_suspend_state: sleep (0->3) at 6739870728686 (2017-02-04 05:53:47.728785348 UTC)
<6>[ 6742.476867] [R] early_suspend start
<6>[ 6742.556365] __spi_bma150_set_mode: BMA get into SLEEP mode!
<7>[ 6742.556793] bma150_early_suspend: spi_bma150_set_mode returned = 0!
<7>[ 6742.574859] supersonic_panel_blank
<7>[ 6742.575286] set brightness = 0
<4>[ 6742.576171] [hdmi/fb]hdmifb_suspend, use_count=0
<4>[ 6742.576416] [hdmi/fb]hdmifb_suspend: hdmifb_suspending = true
<4>[ 6742.576782] [hdmi/lcdc]lcdc_suspend
<4>[ 6742.577026] [hdmi/tx]hdmi_panel_uninit
<4>[ 6742.577362] [hdmi]suc_hdmi_gpio_off
<4>[ 6742.578002] [hdmi/tx]suspending=true, disable timer
<4>[ 6742.578247] [hdmi/tx]hdmi_panel_uninit
<4>[ 6742.578582] [hdmi/tx]hdmi_standby
<4>[ 6742.578826] [hdmi]hdmi_power(4)
<4>[ 6742.579040] [hdmi/lcdc]lcdc_disable_video, blank_count=0
<7>[ 6742.579467] __capella_cm3602_power: Turn the capella_cm3602 power off
<6>[ 6742.584777] atmel_ts_suspend: enter
<7>[ 6742.597229] mddi_novatec_power: power off.
<6>[ 6742.726013] [R] early_suspend: sync
<6>[ 6742.866821] [R] early_suspend end
<6>[ 6743.086578] PM: Syncing filesystems ... done.
<4>[ 6743.087738] Freezing user space processes ... (elapsed 0.01 seconds) done.
<4>[ 6743.106719] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
<4>[ 6743.134857] msmsdcc_suspend enter
<6>[ 6743.135253] supersonic_sdslot_switchvdd: Disabling SD slot power
<4>[ 6743.136047] msmsdcc_suspend leave
<4>[ 6743.136260] msmsdcc_suspend enter
<4>[ 6743.136657] msmsdcc_suspend leave
<4>[ 6743.136871] msmsdcc_suspend enter
<4>[ 6743.137145] msmsdcc_suspend leave
<6>[ 6743.137817] PM: suspend of devices complete after 10.223 msecs
<6>[ 6743.139007] PM: late suspend of devices complete after 0.793 msecs
<6>[ 6743.139007] clocks on: uart_clk
<6>[ 6743.139007] [R] suspend end
<6>[ 6743.139007] [R] resume start
<6>[ 6743.139862] PM: early resume of devices complete after 0.915 msecs
<4>[ 6743.140777] msmsdcc_resume enter
<4>[ 6743.141265] msmsdcc_resume enter
<6>[ 6743.141540] mmc1: Enable clocks
<4>[ 6743.141967] mmc_wimax_enable_host_wakeup mmc_wimax_sdio_status is OFF
<4>[ 6743.144653] msmsdcc_resume enter
<6>[ 6743.154907] PM: resume of devices complete after 14.282 msecs
<4>[ 6743.156372] Restarting tasks ... done.
<6>[ 6743.179840] wakeup wake lock:
<6>[ 6743.181640] suspend: exit suspend, ret = 0 (2017-02-04 05:53:53.028314049 UTC)
<6>[ 6744.135864] mmc1: Bus clock timer expired
<4>[ 6744.136352] mmc_wimax_enable_host_wakeup mmc_wimax_sdio_status is OFF
<6>[ 6744.136688] mmc1: Disable clocks
<6>[ 6744.158538] PM: Syncing filesystems ... done.
<4>[ 6744.160278] Freezing user space processes ... (elapsed 0.02 seconds) done.
<4>[ 6744.187042] Freezing remaining freezable tasks ... (elapsed 0.07 seconds) done.
<4>[ 6744.281036] msmsdcc_suspend enter
<4>[ 6744.281311] msmsdcc_suspend leave
<4>[ 6744.281768] msmsdcc_suspend enter
<4>[ 6744.282043] msmsdcc_suspend leave
<4>[ 6744.282318] msmsdcc_suspend enter
<4>[ 6744.282745] msmsdcc_suspend leave
<6>[ 6744.283325] PM: suspend of devices complete after 15.193 msecs
<6>[ 6744.284545] PM: late suspend of devices complete after 0.915 msecs
<6>[ 6744.284545] clocks on: uart_clk
<6>[ 6744.284545] [R] suspend end
<6>[ 6744.284545] [R] resume start
<6>[ 6744.285491] PM: early resume of devices complete after 0.884 msecs
<4>[ 6744.286346] msmsdcc_resume enter
<4>[ 6744.286865] msmsdcc_resume enter
<6>[ 6744.287292] mmc1: Enable clocks
<4>[ 6744.287567] mmc_wimax_enable_host_wakeup mmc_wimax_sdio_status is OFF
<4>[ 6744.288269] msmsdcc_resume enter
<6>[ 6744.295166] PM: resume of devices complete after 9.030 msecs
<4>[ 6744.296447] Restarting tasks ... done.
<6>[ 6744.315551] wakeup wake lock: gpio_input event0-445 event4-445 alarm
<6>[ 6744.316864] suspend: exit suspend, ret = 0 (2017-02-04 05:55:08.023153907 UTC)
<6>[ 6744.326049] gpio_keys_scan_keys: key 1-74, 0 (94) changed to 1
<6>[ 6744.346435] lightsensor_ioctl set value = 1
<6>[ 6744.346923] lightsensor_enable
<3>[ 6744.347167] lightsensor_enable: microp is suspended
<6>[ 6744.438873] request_suspend_state: wakeup (3->0) at 6741833744110 (2017-02-04 05:55:08.146358040 UTC)
<6>[ 6744.439514] [R] late_resume start
<6>[ 6744.459289] msmfb: pan_update in state(4)
<6>[ 6744.459289] msmfb: drawing while asleep
<6>[ 6744.535400] mddi_wait_interrupt 3405, timeout waiting for 4000, INT = 10, STAT = 10 gotint = 2a004
<6>[ 6744.556945] __spi_bma150_set_mode: BMA get into NORMAL mode!
<6>[ 6744.558776] msmfb: pan_update in state(4)
<6>[ 6744.558807] msmfb: drawing while asleep
<6>[ 6744.566009] gpio_keys_scan_keys: key 1-74, 0 (94) changed to 0
<6>[ 6744.635498] mddi_wait_interrupt 3405, timeout waiting for 20000, INT = 10, STAT = 10 gotint = a004
<7>[ 6744.635528] mddi_novatec_power: power on.
<6>[ 6744.873291] msmfb: pan_update in state(4)
<6>[ 6744.873291] msmfb: drawing while asleep
<6>[ 6744.896057] msmfb: ready, waiting for full update
<6>[ 6744.917816] [CAM]ov8810_resume
<7>[ 6744.918212] __capella_cm3602_power: Turn the capella_cm3602 power on
<4>[ 6744.918975] [hdmi/fb]hdmifb_resume
<4>[ 6744.919219] [hdmi/lcdc]lcdc_resume
<4>[ 6744.919494] [hdmi/tx]hdmi_panel_init
<4>[ 6744.919952] [hdmi]suc_hdmi_gpio_on
<4>[ 6744.920898] [hdmi]hdmi_power(5)
<6>[ 6744.921447] [R] late_resume end
<6>[ 6744.922302] msmfb: pan_update in state(1)
<6>[ 6744.922332] msmfb: full update starting
<6>[ 6744.935485] msmfb: pan_update in state(3)
<6>[ 6744.956756] msmfb: full update completed
<6>[ 6744.956817] msmfb: turning on panel
<7>[ 6744.956848] supersonic_panel_unblank
<7>[ 6744.956848] turn on backlight
<7>[ 6744.956848] set brightness = 100
<6>[ 6744.960968] Touch Status: 0x01 0x10 0xEA 0xD8 0x09 
<6>[ 6744.966735] Touch Status: 0x01 0x00 0xEA 0xD8 0x09 
<7>[ 6745.079284] set brightness = 89
<6>[ 6745.285614] mmc1: Bus clock timer expired
<4>[ 6745.285919] mmc_wimax_enable_host_wakeup mmc_wimax_sdio_status is OFF
<6>[ 6745.286102] mmc1: Disable clocks
<7>[ 6745.776245] ALS value: 0x0, level: 0 #
<6>[ 6745.848754] S1@504,775
<7>[ 6745.896301] ALS value: 0x0, level: 0 #
<6>[ 6746.178649] E1@381,463
<6>[ 6748.470306] check_calibration: calibration confirm
<6>[ 6776.564147] gpio_keys_scan_keys: key 1-74, 0 (94) changed to 1
<6>[ 6776.824310] gpio_keys_scan_keys: key 1-74, 0 (94) continue debounce
<6>[ 6776.845306] gpio_keys_scan_keys: key 1-74, 0 (94) continue debounce
<6>[ 6776.866302] gpio_keys_scan_keys: key 1-74, 0 (94) changed to 0
<6>[ 6776.870788] lightsensor_ioctl set value = 0
<6>[ 6776.871337] lightsensor_disable
<7>[ 6777.560577] set brightness = 0
<4>[ 6777.652587] dhd_set_suspend: force extra Suspend setting 
<4>[ 6777.671539] dhd_get_dtim_skip bcn_li_dtim=3 DTIM=3 Listen=10
<6>[ 6777.736114] __spi_bma150_set_mode: BMA get into SLEEP mode!
<6>[ 6777.931396] request_suspend_state: sleep (0->3) at 6775325775144 (2017-02-04 05:55:41.638358556 UTC)
<6>[ 6777.931457] [R] early_suspend start
<6>[ 6778.006591] __spi_bma150_set_mode: BMA get into SLEEP mode!
<7>[ 6778.006866] bma150_early_suspend: spi_bma150_set_mode returned = 0!
<7>[ 6778.036865] supersonic_panel_blank
<7>[ 6778.037109] set brightness = 0
<4>[ 6778.037963] [hdmi/fb]hdmifb_suspend, use_count=0
<4>[ 6778.038330] [hdmi/fb]hdmifb_suspend: hdmifb_suspending = true
<4>[ 6778.038604] [hdmi/lcdc]lcdc_suspend
<4>[ 6778.038818] [hdmi/tx]hdmi_panel_uninit
<4>[ 6778.039184] [hdmi]suc_hdmi_gpio_off
<4>[ 6778.039764] [hdmi/tx]suspending=true, disable timer
<4>[ 6778.039978] [hdmi/tx]hdmi_panel_uninit
<4>[ 6778.040344] [hdmi/tx]hdmi_standby
<4>[ 6778.040557] [hdmi]hdmi_power(4)
<4>[ 6778.040771] [hdmi/lcdc]lcdc_disable_video, blank_count=0
<7>[ 6778.041198] __capella_cm3602_power: Turn the capella_cm3602 power off
<6>[ 6778.046813] atmel_ts_suspend: enter
<7>[ 6778.062042] mddi_novatec_power: power off.
<6>[ 6778.186035] [R] early_suspend: sync
<6>[ 6778.317504] [R] early_suspend end
<6>[ 6778.516632] PM: Syncing filesystems ... done.
<4>[ 6778.517730] Freezing user space processes ... (elapsed 0.01 seconds) done.
<4>[ 6778.536773] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
<4>[ 6778.564971] msmsdcc_suspend enter
<4>[ 6778.565338] msmsdcc_suspend leave
<4>[ 6778.565582] msmsdcc_suspend enter
<4>[ 6778.565887] msmsdcc_suspend leave
<4>[ 6778.566131] msmsdcc_suspend enter
<4>[ 6778.566558] msmsdcc_suspend leave
<6>[ 6778.567230] PM: suspend of devices complete after 9.552 msecs
<6>[ 6778.568420] PM: late suspend of devices complete after 0.793 msecs
<6>[ 6778.568420] clocks on: uart_clk
<6>[ 6778.568420] [R] suspend end
<6>[ 6778.568420] [R] resume start
<6>[ 6778.569274] PM: early resume of devices complete after 0.915 msecs
<4>[ 6778.570007] msmsdcc_resume enter
<4>[ 6778.570709] msmsdcc_resume enter
<6>[ 6778.570953] mmc1: Enable clocks
<4>[ 6778.571228] mmc_wimax_enable_host_wakeup mmc_wimax_sdio_status is OFF
<4>[ 6778.571960] msmsdcc_resume enter
<6>[ 6778.580291] PM: resume of devices complete after 10.437 msecs
<4>[ 6778.581726] Restarting tasks ... done.
<6>[ 6778.596008] wakeup wake lock:
<6>[ 6778.596466] suspend: exit suspend, ret = 0 (2017-02-04 05:56:12.019744681 UTC)
<6>[ 6778.727478] PM: Syncing filesystems ... done.
<4>[ 6778.729034] Freezing user space processes ... (elapsed 0.03 seconds) done.
<4>[ 6778.766601] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
<4>[ 6778.800201] msmsdcc_suspend enter
<4>[ 6778.800811] msmsdcc_suspend leave
<4>[ 6778.801086] msmsdcc_suspend enter
<6>[ 6778.801391] mmc1: Disable clocks in msmsdcc_suspend
<4>[ 6778.801971] msmsdcc_suspend leave
<4>[ 6778.802246] msmsdcc_suspend enter
<4>[ 6778.802612] msmsdcc_suspend leave
<6>[ 6778.803375] PM: suspend of devices complete after 15.433 msecs
<6>[ 6778.804565] PM: late suspend of devices complete after 0.884 msecs
<6>[ 6778.804565] clocks on: uart_clk
<6>[ 6778.804565] [R] suspend end
<6>[ 6778.804565] [R] resume start
<6>[ 6778.805511] PM: early resume of devices complete after 0.915 msecs
<4>[ 6778.806396] msmsdcc_resume enter
<4>[ 6778.806884] msmsdcc_resume enter
<6>[ 6778.807312] mmc1: Enable clocks
<4>[ 6778.807586] mmc_wimax_enable_host_wakeup mmc_wimax_sdio_status is OFF
<4>[ 6778.810791] msmsdcc_resume enter
<6>[ 6778.823059] PM: resume of devices complete after 16.803 msecs
<4>[ 6778.824371] Restarting tasks ... done.
<6>[ 6778.841766] wakeup wake lock: wlan_wake
<6>[ 6778.842437] suspend: exit suspend, ret = 0 (2017-02-04 05:56:14.021100807 UTC)
<6>[ 6779.805328] mmc1: Bus clock timer expired
<4>[ 6779.805633] mmc_wimax_enable_host_wakeup mmc_wimax_sdio_status is OFF
<6>[ 6779.805938] mmc1: Disable clocks
<6>[ 6779.846527] PM: Syncing filesystems ... done.
<4>[ 6779.848052] Freezing user space processes ... (elapsed 0.03 seconds) done.
<4>[ 6779.886566] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
<4>[ 6779.920104] msmsdcc_suspend enter
<4>[ 6779.920562] msmsdcc_suspend leave
<4>[ 6779.920837] msmsdcc_suspend enter
<4>[ 6779.921142] msmsdcc_suspend leave
<4>[ 6779.921569] msmsdcc_suspend enter
<4>[ 6779.921844] msmsdcc_suspend leave
<6>[ 6779.922393] PM: suspend of devices complete after 14.674 msecs
<6>[ 6779.923767] PM: late suspend of devices complete after 0.884 msecs
<6>[ 6779.923767] clocks on: uart_clk
<6>[ 6779.923767] [R] suspend end
<6>[ 6779.923767] [R] resume start
<6>[ 6779.924621] PM: early resume of devices complete after 0.823 msecs
<4>[ 6779.925445] msmsdcc_resume enter
<4>[ 6779.926116] msmsdcc_resume enter
<6>[ 6779.926361] mmc1: Enable clocks
<4>[ 6779.926635] mmc_wimax_enable_host_wakeup mmc_wimax_sdio_status is OFF
<4>[ 6779.927459] msmsdcc_resume enter
<6>[ 6779.934631] PM: resume of devices complete after 9.335 msecs
<4>[ 6779.936096] Restarting tasks ... done.
<6>[ 6779.951995] wakeup wake lock: wlan_wake alarm
<6>[ 6779.952911] suspend: exit suspend, ret = 0 (2017-02-04 05:57:08.020561232 UTC)
<6>[ 6780.925598] mmc1: Bus clock timer expired
<4>[ 6780.926147] mmc_wimax_enable_host_wakeup mmc_wimax_sdio_status is OFF
<6>[ 6780.927062] mmc1: Disable clocks
<6>[ 6780.956939] PM: Syncing filesystems ... done.
<4>[ 6780.959747] Freezing user space processes ... (elapsed 0.04 seconds) done.
<4>[ 6781.006988] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
<4>[ 6781.045867] msmsdcc_suspend enter
<4>[ 6781.046386] msmsdcc_suspend leave
<4>[ 6781.046905] msmsdcc_suspend enter
<4>[ 6781.047760] msmsdcc_suspend leave
<4>[ 6781.048278] msmsdcc_suspend enter
<4>[ 6781.048767] msmsdcc_suspend leave
<6>[ 6781.050292] PM: suspend of devices complete after 20.502 msecs
<6>[ 6781.052764] PM: late suspend of devices complete after 1.891 msecs
<6>[ 6781.052764] clocks on: uart_clk
<6>[ 6781.052764] [R] suspend end
<6>[ 6781.052764] [R] resume start
<6>[ 6781.054565] PM: early resume of devices complete after 1.861 msecs
<4>[ 6781.056152] msmsdcc_resume enter
<4>[ 6781.056945] msmsdcc_resume enter
<6>[ 6781.057800] mmc1: Enable clocks
<4>[ 6781.058258] mmc_wimax_enable_host_wakeup mmc_wimax_sdio_status is OFF
<4>[ 6781.059020] msmsdcc_resume enter
<6>[ 6781.069000] PM: resume of devices complete after 13.209 msecs
<4>[ 6781.071777] Restarting tasks ... done.
<6>[ 6781.096527] wakeup wake lock: alarm_rtc alarm
<6>[ 6781.098663] suspend: exit suspend, ret = 0 (2017-02-04 06:00:00.031078103 UTC)
<6>[ 6781.990081] PM: Syncing filesystems ... done.
<4>[ 6781.992523] Freezing user space processes ... (elapsed 0.03 seconds) done.
<4>[ 6782.026336] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
<6>[ 6782.054595] mmc1: Bus clock timer expired
<4>[ 6782.055145] mmc_wimax_enable_host_wakeup mmc_wimax_sdio_status is OFF
<6>[ 6782.056030] mmc1: Disable clocks
<4>[ 6782.067169] msmsdcc_suspend enter
<4>[ 6782.068054] msmsdcc_suspend leave
<4>[ 6782.068572] msmsdcc_suspend enter
<4>[ 6782.069091] msmsdcc_suspend leave
<4>[ 6782.069610] msmsdcc_suspend enter
<4>[ 6782.070098] msmsdcc_suspend leave
<6>[ 6782.071258] PM: suspend of devices complete after 22.392 msecs
<3>[ 6782.074127] pm_noirq_op(): platform_pm_suspend_noirq+0x0/0x40 returns -11
<3>[ 6782.074951] PM: Device power.0 failed to suspend late: error -11
<6>[ 6782.077209] PM: early resume of devices complete after 1.311 msecs
<3>[ 6782.078002] PM: Some devices failed to power down
<4>[ 6782.079254] msmsdcc_resume enter
<4>[ 6782.079956] msmsdcc_resume enter
<6>[ 6782.080444] mmc1: Enable clocks
<4>[ 6782.083312] mmc_wimax_enable_host_wakeup mmc_wimax_sdio_status is OFF
<4>[ 6782.089691] msmsdcc_resume enter
<6>[ 6782.103454] PM: resume of devices complete after 24.528 msecs
<4>[ 6782.106750] Restarting tasks ... done.
<6>[ 6782.131103] wakeup wake lock:
<6>[ 6782.132019] suspend: exit suspend, ret = 0 (2017-02-04 06:00:01.065202825 UTC)
<6>[ 6782.903228] PM: Syncing filesystems ... done.
<4>[ 6782.904327] Freezing user space processes ... (elapsed 0.02 seconds) done.
<4>[ 6782.925476] Freezing remaining freezable tasks ... 
<6>[ 6783.084655] mmc1: Bus clock timer expired
<4>[ 6783.085052] mmc_wimax_enable_host_wakeup mmc_wimax_sdio_status is OFF
<6>[ 6783.085296] mmc1: Disable clocks
<4>[ 6783.086120] (elapsed 0.16 seconds) done.
<4>[ 6783.095184] msmsdcc_suspend enter
<4>[ 6783.095397] msmsdcc_suspend leave
<4>[ 6783.095764] msmsdcc_suspend enter
<4>[ 6783.096008] msmsdcc_suspend leave
<4>[ 6783.096221] msmsdcc_suspend enter
<4>[ 6783.096588] msmsdcc_suspend leave
<6>[ 6783.097076] PM: suspend of devices complete after 9.398 msecs
<6>[ 6783.098083] PM: late suspend of devices complete after 0.762 msecs
<6>[ 6783.098083] clocks on: uart_clk
<6>[ 6783.098083] [R] suspend end
<6>[ 6783.098083] [R] resume start
<6>[ 6783.098937] PM: early resume of devices complete after 0.915 msecs
<4>[ 6783.099670] msmsdcc_resume enter
<4>[ 6783.100402] msmsdcc_resume enter
<6>[ 6783.100830] mmc1: Enable clocks
<4>[ 6783.101104] mmc_wimax_enable_host_wakeup mmc_wimax_sdio_status is OFF
<4>[ 6783.106903] msmsdcc_resume enter
<6>[ 6783.120513] PM: resume of devices complete after 20.993 msecs
<4>[ 6783.121948] Restarting tasks ... done.
<6>[ 6783.141113] wakeup wake lock: alarm_rtc alarm
<6>[ 6783.141998] suspend: exit suspend, ret = 0 (2017-02-04 06:02:54.027546729 UTC)
<6>[ 6784.104614] mmc1: Bus clock timer expired
<4>[ 6784.104919] mmc_wimax_enable_host_wakeup mmc_wimax_sdio_status is OFF
<6>[ 6784.105407] mmc1: Disable clocks
<6>[ 6784.194702] PM: Syncing filesystems ... done.
<4>[ 6784.196319] Freezing user space processes ... 
<3>[ 6784.202331] Freezing of user space  aborted
<4>[ 6784.204376] 
<4>[ 6784.204925] Restarting tasks ... done.
<6>[ 6784.210632] wakeup wake lock:
<6>[ 6784.211120] suspend: exit suspend, ret = -16 (2017-02-04 06:02:55.096658674 UTC)
<6>[ 6784.996307] PM: Syncing filesystems ... done.
<4>[ 6784.998016] Freezing user space processes ... (elapsed 0.03 seconds) done.
<4>[ 6785.035858] Freezing remaining freezable tasks ... (elapsed 0.09 seconds) done.
<4>[ 6785.149444] msmsdcc_suspend enter
<4>[ 6785.149749] msmsdcc_suspend leave
<4>[ 6785.150177] msmsdcc_suspend enter
<4>[ 6785.150451] msmsdcc_suspend leave
<4>[ 6785.150726] msmsdcc_suspend enter
<4>[ 6785.151153] msmsdcc_suspend leave
<6>[ 6785.151733] PM: suspend of devices complete after 14.708 msecs
<6>[ 6785.152923] PM: late suspend of devices complete after 0.884 msecs
<6>[ 6785.152923] clocks on: uart_clk
<6>[ 6785.152923] [R] suspend end
<6>[ 6785.152923] [R] resume start
<6>[ 6785.153778] PM: early resume of devices complete after 0.915 msecs
<4>[ 6785.154632] msmsdcc_resume enter
<4>[ 6785.155242] msmsdcc_resume enter
<6>[ 6785.155670] mmc1: Enable clocks
<4>[ 6785.155944] mmc_wimax_enable_host_wakeup mmc_wimax_sdio_status is OFF
<4>[ 6785.156616] msmsdcc_resume enter
<6>[ 6785.167266] PM: resume of devices complete after 12.815 msecs
<4>[ 6785.168518] Restarting tasks ... done.
<6>[ 6785.188049] wakeup wake lock: alarm_rtc
<6>[ 6785.188751] suspend: exit suspend, ret = 0 (2017-02-04 06:03:54.027212695 UTC)
<6>[ 6786.026153] PM: Syncing filesystems ... done.
<4>[ 6786.027709] Freezing user space processes ... (elapsed 0.03 seconds) done.
<4>[ 6786.065765] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
<4>[ 6786.099151] msmsdcc_suspend enter
<4>[ 6786.099792] msmsdcc_suspend leave
<4>[ 6786.100067] msmsdcc_suspend enter
<6>[ 6786.100341] mmc1: Disable clocks in msmsdcc_suspend
<4>[ 6786.100952] msmsdcc_suspend leave
<4>[ 6786.101226] msmsdcc_suspend enter
<4>[ 6786.101593] msmsdcc_suspend leave
<6>[ 6786.102172] PM: suspend of devices complete after 15.375 msecs
<6>[ 6786.103546] PM: late suspend of devices complete after 0.884 msecs
<6>[ 6786.103546] clocks on: uart_clk
<6>[ 6786.103546] [R] suspend end
<6>[ 6786.103546] [R] resume start
<6>[ 6786.104492] PM: early resume of devices complete after 0.915 msecs
<4>[ 6786.105377] msmsdcc_resume enter
<4>[ 6786.105865] msmsdcc_resume enter
<6>[ 6786.106109] mmc1: Enable clocks
<4>[ 6786.106536] mmc_wimax_enable_host_wakeup mmc_wimax_sdio_status is OFF
<4>[ 6786.110534] msmsdcc_resume enter
<6>[ 6786.119750] PM: resume of devices complete after 14.519 msecs
<4>[ 6786.120971] Restarting tasks ... done.
<6>[ 6786.140624] wakeup wake lock: wlan_wake
<6>[ 6786.141479] suspend: exit suspend, ret = 0 (2017-02-04 06:03:54.980038327 UTC)
<6>[ 6787.104217] mmc1: Bus clock timer expired
<4>[ 6787.104797] mmc_wimax_enable_host_wakeup mmc_wimax_sdio_status is OFF
<6>[ 6787.105163] mmc1: Disable clocks
<6>[ 6792.256164] PM: Syncing filesystems ... done.
<4>[ 6792.258666] Freezing user space processes ... (elapsed 0.04 seconds) done.
<4>[ 6792.306365] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
<4>[ 6792.344909] msmsdcc_suspend enter
<4>[ 6792.345428] msmsdcc_suspend leave
<4>[ 6792.345916] msmsdcc_suspend enter
<4>[ 6792.346435] msmsdcc_suspend leave
<4>[ 6792.346923] msmsdcc_suspend enter
<4>[ 6792.347778] msmsdcc_suspend leave
<6>[ 6792.348937] PM: suspend of devices complete after 20.141 msecs
<6>[ 6792.351409] PM: late suspend of devices complete after 1.892 msecs
<6>[ 6792.351409] clocks on: uart_clk
<6>[ 6792.351409] [R] suspend end
<6>[ 6792.351409] [R] resume start
<6>[ 6792.353088] PM: early resume of devices complete after 1.739 msecs
<4>[ 6792.354461] msmsdcc_resume enter
<4>[ 6792.355560] msmsdcc_resume enter
<6>[ 6792.356048] mmc1: Enable clocks
<4>[ 6792.356536] mmc_wimax_enable_host_wakeup mmc_wimax_sdio_status is OFF
<4>[ 6792.357696] msmsdcc_resume enter
<6>[ 6792.367584] PM: resume of devices complete after 13.518 msecs
<4>[ 6792.370727] Restarting tasks ... done.
<6>[ 6792.395599] wakeup wake lock: alarm
<6>[ 6792.396942] suspend: exit suspend, ret = 0 (2017-02-04 06:04:26.031726050 UTC)
<6>[ 6792.428497] PM: Syncing filesystems ... done.
<4>[ 6792.430999] Freezing user space processes ... (elapsed 0.04 seconds) done.
<4>[ 6792.474884] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
<4>[ 6792.513702] msmsdcc_suspend enter
<4>[ 6792.514739] msmsdcc_suspend leave
<4>[ 6792.515258] msmsdcc_suspend enter
<6>[ 6792.515777] mmc1: Disable clocks in msmsdcc_suspend
<4>[ 6792.516845] msmsdcc_suspend leave
<4>[ 6792.517333] msmsdcc_suspend enter
<4>[ 6792.517944] msmsdcc_suspend leave
<6>[ 6792.519470] PM: suspend of devices complete after 21.560 msecs
<6>[ 6792.521911] PM: late suspend of devices complete after 1.860 msecs
<6>[ 6792.521911] clocks on: uart_clk
<6>[ 6792.521911] [R] suspend end
<6>[ 6792.521911] [R] resume start
<6>[ 6792.523712] PM: early resume of devices complete after 1.890 msecs
<4>[ 6792.525299] msmsdcc_resume enter
<4>[ 6792.526031] msmsdcc_resume enter
<6>[ 6792.526885] mmc1: Enable clocks
<4>[ 6792.527343] mmc_wimax_enable_host_wakeup mmc_wimax_sdio_status is OFF
<4>[ 6792.528167] msmsdcc_resume enter
<6>[ 6792.541351] PM: resume of devices complete after 16.376 msecs
<4>[ 6792.544311] Restarting tasks ... done.
<6>[ 6792.565948] wakeup wake lock: alarm_rtc alarm
<6>[ 6792.568054] suspend: exit suspend, ret = 0 (2017-02-04 06:12:54.028327351 UTC)
<6>[ 6793.285705] PM: Syncing filesystems ... done.
<4>[ 6793.288116] Freezing user space processes ... (elapsed 0.03 seconds) done.
<4>[ 6793.324737] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
<4>[ 6793.362731] msmsdcc_suspend enter
<4>[ 6793.363433] msmsdcc_suspend leave
<4>[ 6793.364318] msmsdcc_suspend enter
<6>[ 6793.364807] mmc1: Disable clocks in msmsdcc_suspend
<4>[ 6793.365478] msmsdcc_suspend leave
<4>[ 6793.366363] msmsdcc_suspend enter
<4>[ 6793.367004] msmsdcc_suspend leave
<6>[ 6793.368164] PM: suspend of devices complete after 21.139 msecs
<6>[ 6793.370971] PM: late suspend of devices complete after 1.891 msecs
<6>[ 6793.370971] clocks on: uart_clk
<6>[ 6793.370971] [R] suspend end
<6>[ 6793.370971] [R] resume start
<6>[ 6793.372863] PM: early resume of devices complete after 1.952 msecs
<4>[ 6793.374481] msmsdcc_resume enter
<4>[ 6793.375183] msmsdcc_resume enter
<6>[ 6793.375671] mmc1: Enable clocks
<4>[ 6793.376525] mmc_wimax_enable_host_wakeup mmc_wimax_sdio_status is OFF
<4>[ 6793.377319] msmsdcc_resume enter
<6>[ 6793.390838] PM: resume of devices complete after 16.714 msecs
<4>[ 6793.394134] Restarting tasks ... done.
<6>[ 6793.418548] wakeup wake lock: alarm_rtc alarm
<6>[ 6793.420654] suspend: exit suspend, ret = 0 (2017-02-04 06:33:07.031348921 UTC)
<6>[ 6794.372467] mmc1: Bus clock timer expired
<4>[ 6794.373352] mmc_wimax_enable_host_wakeup mmc_wimax_sdio_status is OFF
<6>[ 6794.373931] mmc1: Disable clocks
<6>[ 6795.358306] PM: Syncing filesystems ... done.
<4>[ 6795.718414] Freezing user space processes ... (elapsed 0.02 seconds) done.
<4>[ 6795.743225] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
<4>[ 6795.771545] msmsdcc_suspend enter
<4>[ 6795.771789] msmsdcc_suspend leave
<4>[ 6795.772155] msmsdcc_suspend enter
<4>[ 6795.772491] msmsdcc_suspend leave
<4>[ 6795.772705] msmsdcc_suspend enter
<4>[ 6795.773071] msmsdcc_suspend leave
<6>[ 6795.773559] PM: suspend of devices complete after 9.246 msecs
<6>[ 6795.774597] PM: late suspend of devices complete after 0.762 msecs
<6>[ 6795.774597] clocks on: uart_clk
<6>[ 6795.774597] [R] suspend end
<6>[ 6795.774597] [R] resume start
<6>[ 6795.775451] PM: early resume of devices complete after 0.823 msecs
<4>[ 6795.776306] msmsdcc_resume enter
<4>[ 6795.776885] msmsdcc_resume enter
<6>[ 6795.777313] mmc1: Enable clocks
<4>[ 6795.777587] mmc_wimax_enable_host_wakeup mmc_wimax_sdio_status is OFF
<4>[ 6795.778289] msmsdcc_resume enter
<6>[ 6795.784851] PM: resume of devices complete after 8.758 msecs
<4>[ 6795.786102] Restarting tasks ... done.
<6>[ 6795.807769] wakeup wake lock: gpio_input
<6>[ 6795.808441] suspend: exit suspend, ret = 0 (2017-02-04 06:40:50.025174515 UTC)
<6>[ 6795.816101] gpio_keys_scan_keys: key 1-74, 0 (94) changed to 1
<6>[ 6795.824432] lightsensor_ioctl set value = 1
<6>[ 6795.824920] lightsensor_enable
<3>[ 6795.825164] lightsensor_enable: microp is suspended
<6>[ 6795.939239] request_suspend_state: wakeup (3->0) at 6793337351584 (2017-02-04 06:40:50.156523300 UTC)
<6>[ 6795.939910] [R] late_resume start
<6>[ 6795.970611] msmfb: pan_update in state(4)
<6>[ 6795.970611] msmfb: drawing while asleep
<6>[ 6796.032165] mddi_wait_interrupt 5755, timeout waiting for 4000, INT = 10, STAT = 10 gotint = 2a004
<6>[ 6796.038299] gpio_keys_scan_keys: key 1-74, 0 (94) continue debounce
<6>[ 6796.042846] __spi_bma150_set_mode: BMA get into NORMAL mode!
<6>[ 6796.058410] gpio_keys_scan_keys: key 1-74, 0 (94) continue debounce
<6>[ 6796.071655] msmfb: pan_update in state(4)
<6>[ 6796.071655] msmfb: drawing while asleep
<6>[ 6796.078521] gpio_keys_scan_keys: key 1-74, 0 (94) changed to 0
<6>[ 6796.132171] mddi_wait_interrupt 5755, timeout waiting for 20000, INT = 10, STAT = 10 gotint = a004
<7>[ 6796.132202] mddi_novatec_power: power on.
<6>[ 6796.171264] msmfb: pan_update in state(4)
<6>[ 6796.171295] msmfb: drawing while asleep
<6>[ 6796.287048] msmfb: pan_update in state(4)
<6>[ 6796.287048] msmfb: drawing while asleep
<6>[ 6796.386108] msmfb: pan_update in state(4)
<6>[ 6796.386138] msmfb: drawing while asleep
<6>[ 6796.392456] msmfb: ready, waiting for full update
<6>[ 6796.397125] msmfb: pan_update in state(1)
<6>[ 6796.397125] msmfb: full update starting
<6>[ 6796.414978] [CAM]ov8810_resume
<7>[ 6796.415252] __capella_cm3602_power: Turn the capella_cm3602 power on
<4>[ 6796.415740] [hdmi/fb]hdmifb_resume
<4>[ 6796.415954] [hdmi/lcdc]lcdc_resume
<4>[ 6796.416168] [hdmi/tx]hdmi_panel_init
<4>[ 6796.416534] [hdmi]suc_hdmi_gpio_on
<4>[ 6796.417083] [hdmi]hdmi_power(5)
<6>[ 6796.417419] [R] late_resume end
<6>[ 6796.431976] msmfb: full update completed
<6>[ 6796.432373] msmfb: turning on panel
<7>[ 6796.432617] supersonic_panel_unblank
<7>[ 6796.432983] turn on backlight
<7>[ 6796.433197] set brightness = 100
<6>[ 6796.458404] Touch Status: 0x01 0x10 0xEA 0xD8 0x09 
<6>[ 6796.464691] Touch Status: 0x01 0x00 0xEA 0xD8 0x09 
<6>[ 6796.503265] msmfb: pan_update in state(3)
<7>[ 6796.598480] set brightness = 89
<6>[ 6796.772216] mmc1: Bus clock timer expired
<4>[ 6796.772399] mmc_wimax_enable_host_wakeup mmc_wimax_sdio_status is OFF
<6>[ 6796.772613] mmc1: Disable clocks
<7>[ 6797.273010] ALS value: 0x0, level: 0 #
<7>[ 6797.393127] ALS value: 0x0, level: 0 #
<6>[ 6799.958160] S1@525,755
<6>[ 6800.277099] E1@970,665
<6>[ 6802.216735] check_calibration: calibration confirm
<6>[ 6810.588012] gpio_keys_scan_keys: key 1-74, 0 (94) changed to 1
<6>[ 6810.823760] gpio_keys_scan_keys: key 1-74, 0 (94) continue debounce
<6>[ 6810.844421] gpio_keys_scan_keys: key 1-74, 0 (94) continue debounce
<6>[ 6810.865386] gpio_keys_scan_keys: key 1-74, 0 (94) changed to 0
<6>[ 6810.869812] lightsensor_ioctl set value = 0
<6>[ 6810.870819] lightsensor_disable
<7>[ 6811.541595] set brightness = 0
<4>[ 6811.649383] dhd_set_suspend: force extra Suspend setting 
<4>[ 6811.668060] dhd_get_dtim_skip bcn_li_dtim=3 DTIM=3 Listen=10
<6>[ 6811.692840] __spi_bma150_set_mode: BMA get into SLEEP mode!
<6>[ 6811.943969] request_suspend_state: sleep (0->3) at 6809341589601 (2017-02-04 06:41:06.160761317 UTC)
<6>[ 6811.944458] [R] early_suspend start
<6>[ 6812.023101] __spi_bma150_set_mode: BMA get into SLEEP mode!
<7>[ 6812.023376] bma150_early_suspend: spi_bma150_set_mode returned = 0!
<7>[ 6812.041595] supersonic_panel_blank
<7>[ 6812.041809] set brightness = 0
<4>[ 6812.042663] [hdmi/fb]hdmifb_suspend, use_count=0
<4>[ 6812.043090] [hdmi/fb]hdmifb_suspend: hdmifb_suspending = true
<4>[ 6812.043334] [hdmi/lcdc]lcdc_suspend
<4>[ 6812.043670] [hdmi/tx]hdmi_panel_uninit
<4>[ 6812.043884] [hdmi]suc_hdmi_gpio_off
<4>[ 6812.044464] [hdmi/tx]suspending=true, disable timer
<4>[ 6812.044860] [hdmi/tx]hdmi_panel_uninit
<4>[ 6812.045074] [hdmi/tx]hdmi_standby
<4>[ 6812.045288] [hdmi]hdmi_power(4)
<4>[ 6812.045654] [hdmi/lcdc]lcdc_disable_video, blank_count=0
<7>[ 6812.045959] __capella_cm3602_power: Turn the capella_cm3602 power off
<6>[ 6812.051666] atmel_ts_suspend: enter
<7>[ 6812.060089] mddi_novatec_power: power off.
<6>[ 6812.182861] [R] early_suspend: sync
<6>[ 6812.353210] [R] early_suspend end
<6>[ 6812.513305] PM: Syncing filesystems ... done.
<4>[ 6812.514404] Freezing user space processes ... (elapsed 0.02 seconds) done.
<4>[ 6812.543334] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
<4>[ 6812.571960] msmsdcc_suspend enter
<4>[ 6812.572174] msmsdcc_suspend leave
<4>[ 6812.572448] msmsdcc_suspend enter
<4>[ 6812.572692] msmsdcc_suspend leave
<4>[ 6812.573059] msmsdcc_suspend enter
<4>[ 6812.573364] msmsdcc_suspend leave
<6>[ 6812.574066] PM: suspend of devices complete after 9.460 msecs
<6>[ 6812.575225] PM: late suspend of devices complete after 0.762 msecs
<6>[ 6812.575225] clocks on: uart_clk
<6>[ 6812.575225] [R] suspend end
<6>[ 6812.575225] [R] resume start
<6>[ 6812.576080] PM: early resume of devices complete after 0.915 msecs
<4>[ 6812.576995] msmsdcc_resume enter
<4>[ 6812.577514] msmsdcc_resume enter
<6>[ 6812.577758] mmc1: Enable clocks
<4>[ 6812.578216] mmc_wimax_enable_host_wakeup mmc_wimax_sdio_status is OFF
<4>[ 6812.578765] msmsdcc_resume enter
<6>[ 6812.587432] PM: resume of devices complete after 10.589 msecs
<4>[ 6812.588897] Restarting tasks ... done.
<6>[ 6812.607543] wakeup wake lock: alarm_rtc
<6>[ 6812.608398] suspend: exit suspend, ret = 0 (2017-02-04 06:41:35.024168466 UTC)
<6>[ 6813.572784] mmc1: Bus clock timer expired
<4>[ 6813.573272] mmc_wimax_enable_host_wakeup mmc_wimax_sdio_status is OFF
<6>[ 6813.573577] mmc1: Disable clocks
<6>[ 6813.583770] PM: Syncing filesystems ... done.
<4>[ 6813.585479] Freezing user space processes ... (elapsed 0.03 seconds) done.
<4>[ 6813.623687] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
<3>[ 6813.653747] pm_op(): platform_pm_suspend+0x0/0x5c returns -16
<3>[ 6813.654296] PM: Device alarm failed to suspend: error -16
<3>[ 6813.654602] PM: Some devices failed to suspend
<6>[ 6813.655090] PM: resume of devices complete after 0.213 msecs
<4>[ 6813.656524] Restarting tasks ... done.
<6>[ 6813.664703] wakeup wake lock:
<6>[ 6813.665191] suspend: exit suspend, ret = -16 (2017-02-04 06:41:36.080891697 UTC)
<6>[ 6813.899230] PM: Syncing filesystems ... done.
<4>[ 6813.900970] Freezing user space processes ... (elapsed 0.02 seconds) done.
<4>[ 6813.923950] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
<4>[ 6813.961242] msmsdcc_suspend enter
<4>[ 6813.961547] msmsdcc_suspend leave
<4>[ 6813.961822] msmsdcc_suspend enter
<4>[ 6813.962280] msmsdcc_suspend leave
<4>[ 6813.962646] msmsdcc_suspend enter
<4>[ 6813.962890] msmsdcc_suspend leave
<6>[ 6813.963653] PM: suspend of devices complete after 18.612 msecs
<6>[ 6813.964904] PM: late suspend of devices complete after 0.945 msecs
<6>[ 6813.964904] clocks on: uart_clk
<6>[ 6813.964904] [R] suspend end
<6>[ 6813.964904] [R] resume start
<6>[ 6813.965789] PM: early resume of devices complete after 0.823 msecs
<4>[ 6813.966705] msmsdcc_resume enter
<4>[ 6813.967163] msmsdcc_resume enter
<6>[ 6813.967437] mmc1: Enable clocks
<4>[ 6813.967864] mmc_wimax_enable_host_wakeup mmc_wimax_sdio_status is OFF
<4>[ 6813.968414] msmsdcc_resume enter
<6>[ 6813.975036] PM: resume of devices complete after 8.482 msecs
<4>[ 6813.976287] Restarting tasks ... done.
<6>[ 6813.993011] wakeup wake lock: wlan_wake
<6>[ 6813.993865] suspend: exit suspend, ret = 0 (2017-02-04 06:44:55.020229216 UTC)
<6>[ 6814.962280] mmc1: Bus clock timer expired
<4>[ 6814.963195] mmc_wimax_enable_host_wakeup mmc_wimax_sdio_status is OFF
<6>[ 6814.963745] mmc1: Disable clocks
<6>[ 6815.004638] PM: Syncing filesystems ... done.
<4>[ 6815.007141] Freezing user space processes ... (elapsed 0.04 seconds) done.
<4>[ 6815.054412] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
<4>[ 6815.092834] msmsdcc_suspend enter
<4>[ 6815.093719] msmsdcc_suspend leave
<4>[ 6815.094207] msmsdcc_suspend enter
<4>[ 6815.094726] msmsdcc_suspend leave
<4>[ 6815.095214] msmsdcc_suspend enter
<4>[ 6815.096252] msmsdcc_suspend leave
<6>[ 6815.097412] PM: suspend of devices complete after 20.563 msecs
<6>[ 6815.099884] PM: late suspend of devices complete after 1.891 msecs
<6>[ 6815.099884] clocks on: uart_clk
<6>[ 6815.099884] [R] suspend end
<6>[ 6815.099884] [R] resume start
<6>[ 6815.101684] PM: early resume of devices complete after 1.769 msecs
<4>[ 6815.102935] msmsdcc_resume enter
<4>[ 6815.104034] msmsdcc_resume enter
<6>[ 6815.104522] mmc1: Enable clocks
<4>[ 6815.104980] mmc_wimax_enable_host_wakeup mmc_wimax_sdio_status is OFF
<4>[ 6815.106170] msmsdcc_resume enter
<6>[ 6815.114776] PM: resume of devices complete after 12.233 msecs
<4>[ 6815.117919] Restarting tasks ... done.
<6>[ 6815.142578] wakeup wake lock: wlan_wake
<6>[ 6815.143951] suspend: exit suspend, ret = 0 (2017-02-04 06:44:57.030621090 UTC)
<6>[ 6816.101989] mmc1: Bus clock timer expired
<4>[ 6816.102539] mmc_wimax_enable_host_wakeup mmc_wimax_sdio_status is OFF
<6>[ 6816.103454] mmc1: Disable clocks
<6>[ 6816.493499] PM: Syncing filesystems ... done.
<4>[ 6816.495971] Freezing user space processes ... (elapsed 0.04 seconds) done.
<4>[ 6816.543365] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
<4>[ 6816.582641] msmsdcc_suspend enter
<4>[ 6816.583160] msmsdcc_suspend leave
<4>[ 6816.583679] msmsdcc_suspend enter
<4>[ 6816.584564] msmsdcc_suspend leave
<4>[ 6816.585083] msmsdcc_suspend enter
<4>[ 6816.585571] msmsdcc_suspend leave
<6>[ 6816.586730] PM: suspend of devices complete after 20.230 msecs
<6>[ 6816.589538] PM: late suspend of devices complete after 1.891 msecs
<6>[ 6816.589538] clocks on: uart_clk
<6>[ 6816.589538] [R] suspend end
<6>[ 6816.589538] [R] resume start
<6>[ 6816.591339] PM: early resume of devices complete after 1.891 msecs
<4>[ 6816.592987] msmsdcc_resume enter
<4>[ 6816.593719] msmsdcc_resume enter
<6>[ 6816.594238] mmc1: Enable clocks
<4>[ 6816.595092] mmc_wimax_enable_host_wakeup mmc_wimax_sdio_status is OFF
<4>[ 6816.595855] msmsdcc_resume enter
<6>[ 6816.605987] PM: resume of devices complete after 13.392 msecs
<4>[ 6816.609130] Restarting tasks ... done.
<6>[ 6816.635772] wakeup wake lock: event0-445 event4-445 alarm
<6>[ 6816.638336] suspend: exit suspend, ret = 0 (2017-02-04 06:45:08.033332247 UTC)
<6>[ 6816.955474] PM: Syncing filesystems ... done.
<4>[ 6816.958343] Freezing user space processes ... (elapsed 0.04 seconds) done.
<4>[ 6817.002838] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
<4>[ 6817.041442] msmsdcc_suspend enter
<4>[ 6817.042114] msmsdcc_suspend leave
<4>[ 6817.042968] msmsdcc_suspend enter
<6>[ 6817.043518] mmc1: Disable clocks in msmsdcc_suspend
<4>[ 6817.044158] msmsdcc_suspend leave
<4>[ 6817.045043] msmsdcc_suspend enter
<4>[ 6817.045623] msmsdcc_suspend leave
<6>[ 6817.046813] PM: suspend of devices complete after 21.234 msecs
<6>[ 6817.049652] PM: late suspend of devices complete after 1.922 msecs
<6>[ 6817.049652] clocks on: uart_clk
<6>[ 6817.049652] [R] suspend end
<6>[ 6817.049652] [R] resume start
<6>[ 6817.051483] PM: early resume of devices complete after 1.891 msecs
<4>[ 6817.053070] msmsdcc_resume enter
<4>[ 6817.053771] msmsdcc_resume enter
<6>[ 6817.054260] mmc1: Enable clocks
<4>[ 6817.054748] mmc_wimax_enable_host_wakeup mmc_wimax_sdio_status is OFF
<4>[ 6817.055908] msmsdcc_resume enter
<6>[ 6817.066040] PM: resume of devices complete after 13.331 msecs
<4>[ 6817.069183] Restarting tasks ... done.
<6>[ 6817.093841] wakeup wake lock: alarm_rtc alarm
<6>[ 6817.096008] suspend: exit suspend, ret = 0 (2017-02-04 06:50:01.031840168 UTC)
<6>[ 6818.012420] PM: Syncing filesystems ... done.
<4>[ 6818.013549] Freezing user space processes ... (elapsed 0.01 seconds) done.
<4>[ 6818.031677] Freezing remaining freezable tasks ... 
<3>[ 6818.032562] Freezing of tasks  aborted
<4>[ 6818.033325] 
<4>[ 6818.033508] Restarting tasks ... done.
<6>[ 6818.043060] wakeup wake lock:
<6>[ 6818.043609] suspend: exit suspend, ret = -16 (2017-02-04 06:50:01.980651316 UTC)
<6>[ 6818.050781] mmc1: Bus clock timer expired
<4>[ 6818.051177] mmc_wimax_enable_host_wakeup mmc_wimax_sdio_status is OFF
<6>[ 6818.051452] mmc1: Disable clocks
<6>[ 6818.052825] PM: Syncing filesystems ... done.
<4>[ 6818.054046] Freezing user space processes ... (elapsed 0.01 seconds) done.
<4>[ 6818.071685] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
<4>[ 6818.100067] msmsdcc_suspend enter
<4>[ 6818.100280] msmsdcc_suspend leave
<4>[ 6818.100646] msmsdcc_suspend enter
<4>[ 6818.100982] msmsdcc_suspend leave
<4>[ 6818.101226] msmsdcc_suspend enter
<4>[ 6818.101654] msmsdcc_suspend leave
<6>[ 6818.102142] PM: suspend of devices complete after 9.396 msecs
<6>[ 6818.103179] PM: late suspend of devices complete after 0.762 msecs
<6>[ 6818.103179] clocks on: uart_clk
<6>[ 6818.103179] [R] suspend end
<6>[ 6818.103179] [R] resume start
<6>[ 6818.104034] PM: early resume of devices complete after 0.823 msecs
<4>[ 6818.104766] msmsdcc_resume enter
<4>[ 6818.105407] msmsdcc_resume enter
<6>[ 6818.105682] mmc1: Enable clocks
<4>[ 6818.105926] mmc_wimax_enable_host_wakeup mmc_wimax_sdio_status is OFF
<4>[ 6818.106628] msmsdcc_resume enter
<6>[ 6818.114624] PM: resume of devices complete after 10.037 msecs
<4>[ 6818.115875] Restarting tasks ... done.
<6>[ 6818.134582] wakeup wake lock: wlan_wake
<6>[ 6818.135284] suspend: exit suspend, ret = 0 (2017-02-04 06:50:03.022270463 UTC)
<6>[ 6819.100830] mmc1: Bus clock timer expired
<4>[ 6819.101165] mmc_wimax_enable_host_wakeup mmc_wimax_sdio_status is OFF
<6>[ 6819.101654] mmc1: Disable clocks
<6>[ 6819.142028] PM: Syncing filesystems ... done.
<4>[ 6819.143585] Freezing user space processes ... (elapsed 0.03 seconds) done.
<4>[ 6819.181884] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
<4>[ 6819.216033] msmsdcc_suspend enter
<4>[ 6819.216308] msmsdcc_suspend leave
<4>[ 6819.216583] msmsdcc_suspend enter
<4>[ 6819.216888] msmsdcc_suspend leave
<4>[ 6819.217315] msmsdcc_suspend enter
<4>[ 6819.217590] msmsdcc_suspend leave
<6>[ 6819.218170] PM: suspend of devices complete after 14.736 msecs
<6>[ 6819.219543] PM: late suspend of devices complete after 0.884 msecs
<6>[ 6819.219543] clocks on: uart_clk
<6>[ 6819.219543] [R] suspend end
<6>[ 6819.219543] [R] resume start
<6>[ 6819.220489] PM: early resume of devices complete after 0.884 msecs
<4>[ 6819.221405] msmsdcc_resume enter
<4>[ 6819.221893] msmsdcc_resume enter
<6>[ 6819.222167] mmc1: Enable clocks
<4>[ 6819.222595] mmc_wimax_enable_host_wakeup mmc_wimax_sdio_status is OFF
<4>[ 6819.223266] msmsdcc_resume enter
<6>[ 6819.229980] PM: resume of devices complete after 8.726 msecs
<4>[ 6819.231506] Restarting tasks ... done.
<6>[ 6819.248870] wakeup wake lock: wlan_wake
<6>[ 6819.249725] suspend: exit suspend, ret = 0 (2017-02-04 06:50:09.021477485 UTC)
<6>[ 6820.221130] mmc1: Bus clock timer expired
<4>[ 6820.222045] mmc_wimax_enable_host_wakeup mmc_wimax_sdio_status is OFF
<6>[ 6820.222595] mmc1: Disable clocks
<6>[ 6820.252563] PM: Syncing filesystems ... done.
<4>[ 6820.255371] Freezing user space processes ... (elapsed 0.04 seconds) done.
<4>[ 6820.302429] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
<4>[ 6820.341278] msmsdcc_suspend enter
<4>[ 6820.341796] msmsdcc_suspend leave
<4>[ 6820.342681] msmsdcc_suspend enter
<4>[ 6820.343170] msmsdcc_suspend leave
<4>[ 6820.343688] msmsdcc_suspend enter
<4>[ 6820.344177] msmsdcc_suspend leave
<6>[ 6820.345703] PM: suspend of devices complete after 20.381 msecs
<6>[ 6820.348175] PM: late suspend of devices complete after 1.891 msecs
<6>[ 6820.348175] clocks on: uart_clk
<6>[ 6820.348175] [R] suspend end
<6>[ 6820.348175] [R] resume start
<6>[ 6820.350006] PM: early resume of devices complete after 1.739 msecs
<4>[ 6820.351226] msmsdcc_resume enter
<4>[ 6820.351989] msmsdcc_resume enter
<6>[ 6820.352844] mmc1: Enable clocks
<4>[ 6820.353363] mmc_wimax_enable_host_wakeup mmc_wimax_sdio_status is OFF
<4>[ 6820.354492] msmsdcc_resume enter
<6>[ 6820.364135] PM: resume of devices complete after 13.271 msecs
<4>[ 6820.366912] Restarting tasks ... done.
<6>[ 6820.392150] wakeup wake lock: wlan_wake alarm
<6>[ 6820.393951] suspend: exit suspend, ret = 0 (2017-02-04 06:57:08.031201151 UTC)
<6>[ 6821.350341] mmc1: Bus clock timer expired
<4>[ 6821.350921] mmc_wimax_enable_host_wakeup mmc_wimax_sdio_status is OFF
<6>[ 6821.351837] mmc1: Disable clocks
<6>[ 6821.402191] PM: Syncing filesystems ... done.
<4>[ 6821.404785] Freezing user space processes ... (elapsed 0.04 seconds) done.
<4>[ 6821.452178] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
<4>[ 6821.491363] msmsdcc_suspend enter
<4>[ 6821.491882] msmsdcc_suspend leave
<4>[ 6821.492401] msmsdcc_suspend enter
<4>[ 6821.492889] msmsdcc_suspend leave
<4>[ 6821.493743] msmsdcc_suspend enter
<4>[ 6821.494262] msmsdcc_suspend leave
<6>[ 6821.495422] PM: suspend of devices complete after 20.562 msecs
<6>[ 6821.498229] PM: late suspend of devices complete after 1.891 msecs
<6>[ 6821.498229] clocks on: uart_clk
<6>[ 6821.498229] [R] suspend end
<6>[ 6821.498229] [R] resume start
<6>[ 6821.500122] PM: early resume of devices complete after 1.952 msecs
<4>[ 6821.501708] msmsdcc_resume enter
<4>[ 6821.502471] msmsdcc_resume enter
<6>[ 6821.502960] mmc1: Enable clocks
<4>[ 6821.503448] mmc_wimax_enable_host_wakeup mmc_wimax_sdio_status is OFF
<4>[ 6821.504821] msmsdcc_resume enter
<6>[ 6821.514190] PM: resume of devices complete after 12.842 msecs
<4>[ 6821.517333] Restarting tasks ... done.
<6>[ 6821.542144] wakeup wake lock: alarm_rtc alarm
<6>[ 6821.544311] suspend: exit suspend, ret = 0 (2017-02-04 06:59:12.031320063 UTC)
<6>[ 6822.500305] mmc1: Bus clock timer expired
<4>[ 6822.501251] mmc_wimax_enable_host_wakeup mmc_wimax_sdio_status is OFF
<6>[ 6822.501800] mmc1: Disable clocks
<6>[ 6822.511474] PM: Syncing filesystems ... done.
<4>[ 6822.514312] Freezing user space processes ... (elapsed 0.04 seconds) done.
<4>[ 6822.561462] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
<4>[ 6822.591644] msmsdcc_suspend enter
<4>[ 6822.592193] msmsdcc_suspend leave
<4>[ 6822.593078] msmsdcc_suspend enter
<4>[ 6822.593597] msmsdcc_suspend leave
<4>[ 6822.594085] msmsdcc_suspend enter
<4>[ 6822.594573] msmsdcc_suspend leave
<6>[ 6822.596099] PM: suspend of devices complete after 11.898 msecs
<3>[ 6822.598571] pm_noirq_op(): platform_pm_suspend_noirq+0x0/0x40 returns -11
<3>[ 6822.599517] PM: Device power.0 failed to suspend late: error -11
<6>[ 6822.602020] PM: early resume of devices complete after 1.433 msecs
<3>[ 6822.603179] PM: Some devices failed to power down
<4>[ 6822.604064] msmsdcc_resume enter
<4>[ 6822.605133] msmsdcc_resume enter
<6>[ 6822.605590] mmc1: Enable clocks
<4>[ 6822.606353] mmc_wimax_enable_host_wakeup mmc_wimax_sdio_status is OFF
<4>[ 6822.613555] msmsdcc_resume enter
<6>[ 6822.624084] PM: resume of devices complete after 20.319 msecs
<4>[ 6822.627380] Restarting tasks ... done.
<6>[ 6822.652130] wakeup wake lock:
<6>[ 6822.653076] suspend: exit suspend, ret = 0 (2017-02-04 06:59:14.033801456 UTC)
<6>[ 6822.702636] PM: Syncing filesystems ... done.
<4>[ 6822.705139] Freezing user space processes ... (elapsed 0.04 seconds) done.
<4>[ 6822.751403] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
<4>[ 6822.790405] msmsdcc_suspend enter
<4>[ 6822.791442] msmsdcc_suspend leave
<4>[ 6822.791961] msmsdcc_suspend enter
<6>[ 6822.792480] mmc1: Disable clocks in msmsdcc_suspend
<4>[ 6822.793487] msmsdcc_suspend leave
<4>[ 6822.794006] msmsdcc_suspend enter
<4>[ 6822.794647] msmsdcc_suspend leave
<6>[ 6822.796173] PM: suspend of devices complete after 21.378 msecs
<6>[ 6822.798645] PM: late suspend of devices complete after 1.890 msecs
<6>[ 6822.798645] clocks on: uart_clk
<6>[ 6822.798645] [R] suspend end
<6>[ 6822.798645] [R] resume start
<6>[ 6822.800445] PM: early resume of devices complete after 1.738 msecs
<4>[ 6822.802032] msmsdcc_resume enter
<4>[ 6822.802764] msmsdcc_resume enter
<6>[ 6822.803619] mmc1: Enable clocks
<4>[ 6822.804107] mmc_wimax_enable_host_wakeup mmc_wimax_sdio_status is OFF
<4>[ 6822.804901] msmsdcc_resume enter
<6>[ 6822.818084] PM: resume of devices complete after 16.376 msecs
<4>[ 6822.821075] Restarting tasks ... done.
<6>[ 6822.843383] wakeup wake lock: alarm_rtc
<6>[ 6822.845123] suspend: exit suspend, ret = 0 (2017-02-04 06:59:59.028937789 UTC)
<6>[ 6823.799438] mmc1: Bus clock timer expired
<4>[ 6823.800354] mmc_wimax_enable_host_wakeup mmc_wimax_sdio_status is OFF
<6>[ 6823.800903] mmc1: Disable clocks
<6>[ 6823.811004] PM: Syncing filesystems ... done.
<4>[ 6823.813446] Freezing user space processes ... 
<3>[ 6823.823883] Freezing of user space  aborted
<4>[ 6823.826995] 
<4>[ 6823.827453] Restarting tasks ... done.
<6>[ 6823.836425] wakeup wake lock:
<6>[ 6823.837676] suspend: exit suspend, ret = -16 (2017-02-04 07:00:00.021490499 UTC)
<6>[ 6824.931976] PM: Syncing filesystems ... done.
<4>[ 6825.286468] Freezing user space processes ... (elapsed 0.03 seconds) done.
<4>[ 6825.320098] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
<4>[ 6825.348602] msmsdcc_suspend enter
<4>[ 6825.348846] msmsdcc_suspend leave
<4>[ 6825.349060] msmsdcc_suspend enter
<4>[ 6825.349487] msmsdcc_suspend leave
<4>[ 6825.349700] msmsdcc_suspend enter
<4>[ 6825.349914] msmsdcc_suspend leave
<6>[ 6825.350555] PM: suspend of devices complete after 9.277 msecs
<6>[ 6825.351562] PM: late suspend of devices complete after 0.762 msecs
<6>[ 6825.351562] clocks on: uart_clk
<6>[ 6825.351562] [R] suspend end
<6>[ 6825.351562] [R] resume start
<6>[ 6825.352416] PM: early resume of devices complete after 0.915 msecs
<4>[ 6825.353332] msmsdcc_resume enter
<4>[ 6825.353851] msmsdcc_resume enter
<6>[ 6825.354095] mmc1: Enable clocks
<4>[ 6825.354553] mmc_wimax_enable_host_wakeup mmc_wimax_sdio_status is OFF
<4>[ 6825.355072] msmsdcc_resume enter
<6>[ 6825.367645] PM: resume of devices complete after 14.465 msecs
<4>[ 6825.369018] Restarting tasks ... done.
<6>[ 6825.387207] wakeup wake lock: alarm_rtc
<6>[ 6825.388092] suspend: exit suspend, ret = 0 (2017-02-04 07:00:13.023345796 UTC)
<6>[ 6826.349395] mmc1: Bus clock timer expired
<4>[ 6826.349884] mmc_wimax_enable_host_wakeup mmc_wimax_sdio_status is OFF
<6>[ 6826.350189] mmc1: Disable clocks
<6>[ 6826.577728] PM: Syncing filesystems ... done.
<4>[ 6826.579803] Freezing user space processes ... 
<3>[ 6826.597290] Freezing of user space  aborted
<4>[ 6826.599426] 
<4>[ 6826.603332] Restarting tasks ... done.
<6>[ 6826.613555] wakeup wake lock:
<6>[ 6826.614196] suspend: exit suspend, ret = -16 (2017-02-04 07:00:14.249223782 UTC)
<6>[ 6831.477996] PM: Syncing filesystems ... done.
<4>[ 6831.481292] Freezing user space processes ... (elapsed 0.04 seconds) done.
<4>[ 6831.531127] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
<4>[ 6831.569641] msmsdcc_suspend enter
<4>[ 6831.570190] msmsdcc_suspend leave
<4>[ 6831.570678] msmsdcc_suspend enter
<4>[ 6831.571563] msmsdcc_suspend leave
<4>[ 6831.572082] msmsdcc_suspend enter
<4>[ 6831.572570] msmsdcc_suspend leave
<6>[ 6831.573730] PM: suspend of devices complete after 19.927 msecs
<6>[ 6831.576202] PM: late suspend of devices complete after 1.892 msecs
<6>[ 6831.576202] clocks on: uart_clk
<6>[ 6831.576202] [R] suspend end
<6>[ 6831.576202] [R] resume start
<6>[ 6831.577880] PM: early resume of devices complete after 1.770 msecs
<4>[ 6831.579742] msmsdcc_resume enter
<4>[ 6831.580505] msmsdcc_resume enter
<6>[ 6831.580993] mmc1: Enable clocks
<4>[ 6831.581848] mmc_wimax_enable_host_wakeup mmc_wimax_sdio_status is OFF
<4>[ 6831.582611] msmsdcc_resume enter
<6>[ 6831.592803] PM: resume of devices complete after 13.457 msecs
<4>[ 6831.595550] Restarting tasks ... done.
<6>[ 6831.620361] wakeup wake lock: alarm_rtc
<6>[ 6831.622100] suspend: exit suspend, ret = 0 (2017-02-04 07:00:30.031482093 UTC)
<6>[ 6831.903900] PM: Syncing filesystems ... done.
<4>[ 6831.906768] Freezing user space processes ... (elapsed 0.04 seconds) done.
<4>[ 6831.950073] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
<4>[ 6831.989166] msmsdcc_suspend enter
<4>[ 6831.989868] msmsdcc_suspend leave
<4>[ 6831.990722] msmsdcc_suspend enter
<6>[ 6831.991271] mmc1: Disable clocks in msmsdcc_suspend
<4>[ 6831.991973] msmsdcc_suspend leave
<4>[ 6831.992828] msmsdcc_suspend enter
<4>[ 6831.993438] msmsdcc_suspend leave
<6>[ 6831.994598] PM: suspend of devices complete after 21.325 msecs
<6>[ 6831.997436] PM: late suspend of devices complete after 1.922 msecs
<6>[ 6831.997436] clocks on: uart_clk
<6>[ 6831.997436] [R] suspend end
<6>[ 6831.997436] [R] resume start
<6>[ 6831.999237] PM: early resume of devices complete after 1.891 msecs
<4>[ 6832.000823] msmsdcc_resume enter
<4>[ 6832.001556] msmsdcc_resume enter
<6>[ 6832.002044] mmc1: Enable clocks
<4>[ 6832.002532] mmc_wimax_enable_host_wakeup mmc_wimax_sdio_status is OFF
<4>[ 6832.003662] msmsdcc_resume enter
<6>[ 6832.013183] PM: resume of devices complete after 12.690 msecs
<4>[ 6832.016296] Restarting tasks ... done.
<6>[ 6832.041107] wakeup wake lock: alarm
<6>[ 6832.042480] suspend: exit suspend, ret = 0 (2017-02-04 07:03:09.031504049 UTC)
<6>[ 6832.998107] mmc1: Bus clock timer expired
<4>[ 6832.998352] mmc_wimax_enable_host_wakeup mmc_wimax_sdio_status is OFF
<6>[ 6832.998779] mmc1: Disable clocks
<6>[ 6833.095855] PM: Syncing filesystems ... done.
<4>[ 6833.442779] Freezing user space processes ... (elapsed 0.02 seconds) done.
<4>[ 6833.468994] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
<4>[ 6833.497406] msmsdcc_suspend enter
<4>[ 6833.497650] msmsdcc_suspend leave
<4>[ 6833.497863] msmsdcc_suspend enter
<4>[ 6833.498291] msmsdcc_suspend leave
<4>[ 6833.498535] msmsdcc_suspend enter
<4>[ 6833.498809] msmsdcc_suspend leave
<6>[ 6833.499450] PM: suspend of devices complete after 9.367 msecs
<6>[ 6833.500457] PM: late suspend of devices complete after 0.762 msecs
<6>[ 6833.500457] clocks on: uart_clk
<6>[ 6833.500457] [R] suspend end
<6>[ 6833.500457] [R] resume start
<6>[ 6833.501312] PM: early resume of devices complete after 0.915 msecs
<4>[ 6833.502227] msmsdcc_resume enter
<4>[ 6833.502777] msmsdcc_resume enter
<6>[ 6833.503204] mmc1: Enable clocks
<4>[ 6833.503479] mmc_wimax_enable_host_wakeup mmc_wimax_sdio_status is OFF
<4>[ 6833.504028] msmsdcc_resume enter
<6>[ 6833.516540] PM: resume of devices complete after 14.432 msecs
<4>[ 6833.518066] Restarting tasks ... done.
<6>[ 6833.537200] wakeup wake lock: alarm_rtc alarm
<6>[ 6833.539184] suspend: exit suspend, ret = 0 (2017-02-04 07:12:54.024954818 UTC)
<6>[ 6834.291961] PM: Syncing filesystems ... done.
<4>[ 6834.293487] Freezing user space processes ... (elapsed 0.03 seconds) done.
<4>[ 6834.329467] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
<4>[ 6834.362609] msmsdcc_suspend enter
<4>[ 6834.363067] msmsdcc_suspend leave
<4>[ 6834.363525] msmsdcc_suspend enter
<6>[ 6834.363800] mmc1: Disable clocks in msmsdcc_suspend
<4>[ 6834.364227] msmsdcc_suspend leave
<4>[ 6834.364685] msmsdcc_suspend enter
<4>[ 6834.365051] msmsdcc_suspend leave
<6>[ 6834.365600] PM: suspend of devices complete after 15.222 msecs
<6>[ 6834.367004] PM: late suspend of devices complete after 0.884 msecs
<6>[ 6834.367004] clocks on: uart_clk
<6>[ 6834.367004] [R] suspend end
<6>[ 6834.367004] [R] resume start
<6>[ 6834.367950] PM: early resume of devices complete after 0.976 msecs
<4>[ 6834.368865] msmsdcc_resume enter
<4>[ 6834.369354] msmsdcc_resume enter
<6>[ 6834.369598] mmc1: Enable clocks
<4>[ 6834.370056] mmc_wimax_enable_host_wakeup mmc_wimax_sdio_status is OFF
<4>[ 6834.371856] msmsdcc_resume enter
<6>[ 6834.385772] PM: resume of devices complete after 17.081 msecs
<4>[ 6834.387298] Restarting tasks ... done.
<6>[ 6834.405609] wakeup wake lock: alarm
<6>[ 6834.406463] suspend: exit suspend, ret = 0 (2017-02-04 07:15:01.023390914 UTC)
<6>[ 6835.368225] mmc1: Bus clock timer expired
<4>[ 6835.368896] mmc_wimax_enable_host_wakeup mmc_wimax_sdio_status is OFF
<6>[ 6835.369293] mmc1: Disable clocks
<6>[ 6865.227935] PM: Syncing filesystems ... done.
<4>[ 6865.229309] Freezing user space processes ... (elapsed 0.02 seconds) done.
<4>[ 6865.259033] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
<4>[ 6865.287963] msmsdcc_suspend enter
<4>[ 6865.288238] msmsdcc_suspend leave
<4>[ 6865.288604] msmsdcc_suspend enter
<4>[ 6865.288848] msmsdcc_suspend leave
<4>[ 6865.289062] msmsdcc_suspend enter
<4>[ 6865.289276] msmsdcc_suspend leave
<6>[ 6865.289886] PM: suspend of devices complete after 9.765 msecs
<6>[ 6865.290924] PM: late suspend of devices complete after 0.762 msecs
<6>[ 6865.290924] clocks on: uart_clk
<6>[ 6865.290924] [R] suspend end
<6>[ 6865.290924] [R] resume start
<6>[ 6865.291931] PM: early resume of devices complete after 1.098 msecs
<4>[ 6865.292724] msmsdcc_resume enter
<4>[ 6865.293212] msmsdcc_resume enter
<6>[ 6865.293640] mmc1: Enable clocks
<4>[ 6865.293914] mmc_wimax_enable_host_wakeup mmc_wimax_sdio_status is OFF
<4>[ 6865.294616] msmsdcc_resume enter
<6>[ 6865.304870] PM: resume of devices complete after 12.329 msecs
<4>[ 6865.306213] Restarting tasks ... done.
<6>[ 6865.324859] wakeup wake lock: rpc_read
<6>[ 6865.325531] suspend: exit suspend, ret = 0 (2017-02-04 07:15:52.022397999 UTC)
<6>[ 6865.339996] PM: Syncing filesystems ... done.
<4>[ 6865.341552] Freezing user space processes ... (elapsed 0.03 seconds) done.
<4>[ 6865.379089] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
<4>[ 6865.415649] msmsdcc_suspend enter
<4>[ 6865.416290] msmsdcc_suspend leave
<4>[ 6865.416564] msmsdcc_suspend enter
<6>[ 6865.416870] mmc1: Disable clocks in msmsdcc_suspend
<4>[ 6865.417449] msmsdcc_suspend leave
<4>[ 6865.417785] msmsdcc_suspend enter
<4>[ 6865.418182] msmsdcc_suspend leave
<6>[ 6865.418762] PM: suspend of devices complete after 18.604 msecs
<6>[ 6865.420166] PM: late suspend of devices complete after 0.914 msecs
<6>[ 6865.420166] clocks on: uart_clk
<6>[ 6865.420166] [R] suspend end
<6>[ 6865.420166] [R] resume start
<6>[ 6865.421020] PM: early resume of devices complete after 0.823 msecs
<4>[ 6865.421936] msmsdcc_resume enter
<4>[ 6865.422424] msmsdcc_resume enter
<6>[ 6865.422698] mmc1: Enable clocks
<4>[ 6865.423126] mmc_wimax_enable_host_wakeup mmc_wimax_sdio_status is OFF
<4>[ 6865.425140] msmsdcc_resume enter
<6>[ 6865.434783] PM: resume of devices complete after 12.991 msecs
<4>[ 6865.436218] Restarting tasks ... done.
<6>[ 6865.453765] wakeup wake lock: wlan_wake alarm
<6>[ 6865.454864] suspend: exit suspend, ret = 0 (2017-02-04 07:23:10.021437879 UTC)
<6>[ 6866.417755] mmc1: Bus clock timer expired
<4>[ 6866.418243] mmc_wimax_enable_host_wakeup mmc_wimax_sdio_status is OFF
<6>[ 6866.418548] mmc1: Disable clocks
<6>[ 6882.614715] PM: Syncing filesystems ... done.
<4>[ 6882.617187] Freezing user space processes ... (elapsed 0.05 seconds) done.
<4>[ 6882.669799] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
<4>[ 6882.708435] msmsdcc_suspend enter
<4>[ 6882.708953] msmsdcc_suspend leave
<4>[ 6882.709838] msmsdcc_suspend enter
<4>[ 6882.710357] msmsdcc_suspend leave
<4>[ 6882.710845] msmsdcc_suspend enter
<4>[ 6882.711700] msmsdcc_suspend leave
<6>[ 6882.712860] PM: suspend of devices complete after 20.568 msecs
<6>[ 6882.715301] PM: late suspend of devices complete after 1.861 msecs
<6>[ 6882.715301] clocks on: uart_clk
<6>[ 6882.715301] [R] suspend end
<6>[ 6882.715301] [R] resume start
<6>[ 6882.717193] PM: early resume of devices complete after 1.831 msecs
<4>[ 6882.718566] msmsdcc_resume enter
<4>[ 6882.719665] msmsdcc_resume enter
<6>[ 6882.720153] mmc1: Enable clocks
<4>[ 6882.720642] mmc_wimax_enable_host_wakeup mmc_wimax_sdio_status is OFF
<4>[ 6882.721893] msmsdcc_resume enter
<6>[ 6882.731323] PM: resume of devices complete after 13.151 msecs
<4>[ 6882.734069] Restarting tasks ... 
<6>[ 6882.758026] gpio_keys_scan_keys: key 1-74, 0 (94) changed to 1
<4>[ 6882.759277] done.
<6>[ 6882.759765] wakeup wake lock: alarm event4-445
<6>[ 6882.761871] suspend: exit suspend, ret = 0 (2017-02-04 07:25:04.031390164 UTC)
<6>[ 6882.780731] lightsensor_ioctl set value = 1
<6>[ 6882.781646] lightsensor_enable
<3>[ 6882.782135] lightsensor_enable: microp is suspended
<6>[ 6882.915618] request_suspend_state: wakeup (3->0) at 6880318917933 (2017-02-04 07:25:04.187042727 UTC)
<6>[ 6882.916412] [R] late_resume start
<6>[ 6882.940399] gpio_keys_scan_keys: key 1-74, 0 (94) continue debounce
<6>[ 6882.961059] gpio_keys_scan_keys: key 1-74, 0 (94) continue debounce
<6>[ 6882.963134] msmfb: pan_update in state(4)
<6>[ 6882.963165] msmfb: drawing while asleep
<6>[ 6882.982086] gpio_keys_scan_keys: key 1-74, 0 (94) changed to 0
<6>[ 6882.997802] __spi_bma150_set_mode: BMA get into NORMAL mode!
<6>[ 6883.016998] mddi_wait_interrupt 5755, timeout waiting for 4000, INT = 10, STAT = 10 gotint = 2a004
<6>[ 6883.068756] msmfb: pan_update in state(4)
<6>[ 6883.068786] msmfb: drawing while asleep
<6>[ 6883.117065] mddi_wait_interrupt 5755, timeout waiting for 20000, INT = 10, STAT = 10 gotint = a004
<7>[ 6883.117156] mddi_novatec_power: power on.
<6>[ 6883.173217] msmfb: pan_update in state(4)
<6>[ 6883.173248] msmfb: drawing while asleep
<6>[ 6883.271728] msmfb: pan_update in state(4)
<6>[ 6883.271789] msmfb: drawing while asleep
<6>[ 6883.371795] msmfb: pan_update in state(4)
<6>[ 6883.371826] msmfb: drawing while asleep
<6>[ 6883.377136] msmfb: ready, waiting for full update
<6>[ 6883.399505] [CAM]ov8810_resume
<7>[ 6883.400176] __capella_cm3602_power: Turn the capella_cm3602 power on
<4>[ 6883.400878] [hdmi/fb]hdmifb_resume
<4>[ 6883.401733] [hdmi/lcdc]lcdc_resume
<4>[ 6883.402221] [hdmi/tx]hdmi_panel_init
<4>[ 6883.402740] [hdmi]suc_hdmi_gpio_on
<4>[ 6883.404327] [hdmi]hdmi_power(5)
<6>[ 6883.405151] [R] late_resume end
<6>[ 6883.408111] Touch Status: 0x01 0x10 0xEA 0xD8 0x09 
<6>[ 6883.413299] Touch Status: 0x01 0x00 0xEA 0xD8 0x09 
<6>[ 6883.435760] msmfb: pan_update in state(1)
<6>[ 6883.435760] msmfb: full update starting
<7>[ 6883.449707] set brightness = 89
<6>[ 6883.461578] msmfb: pan_update in state(3)
<6>[ 6883.470184] msmfb: full update completed
<6>[ 6883.470275] msmfb: turning on panel
<7>[ 6883.470306] supersonic_panel_unblank
<7>[ 6883.470306] turn on backlight
<7>[ 6883.470306] set brightness = 89
<6>[ 6883.717224] mmc1: Bus clock timer expired
<4>[ 6883.717407] mmc_wimax_enable_host_wakeup mmc_wimax_sdio_status is OFF
<6>[ 6883.717712] mmc1: Disable clocks
<7>[ 6884.257934] ALS value: 0x0, level: 0 #
<7>[ 6884.377868] ALS value: 0x0, level: 0 #
<6>[ 6884.621154] S1@491,752
<6>[ 6884.881622] E1@977,699
<6>[ 6888.419097] check_calibration: calibration confirm
<6>[ 6942.797698] batt: SMEM_BATT: get_batt_info: batt_id=1, batt_vol=3939, batt_temp=232, batt_current=0, eval_current=140, level=73, charging_source=0, charging_enabled=0, full_bat=1500000, over_vchg=0 at 6940201019973 (2017-02-04 07:26:04.068717502 UTC)
<6>[ 6942.798431] batt: SMEM_BATT: get_batt_info: batt_id=1, batt_vol=3939, batt_temp=232, batt_current=0, eval_current=140, level=73, charging_source=0, charging_enabled=0, full_bat=1500000, over_vchg=0 at 6940201813430 (2017-02-04 07:26:04.069419406 UTC)
<6>[ 6942.800048] healthd: battery l=73 v=3 t=23.2 h=2 st=4 chg=
<6>[ 6943.973266] batt: M2A_RPC: level_update: 72 at 6941376312942 (2017-02-04 07:26:05.244254612 UTC)
<6>[ 6943.973724] batt: batt:power_supply_changed: battery at 6941376770706 (2017-02-04 07:26:05.244742893 UTC)
<6>[ 6943.975646] batt: SMEM_BATT: get_batt_info: batt_id=1, batt_vol=3904, batt_temp=240, batt_current=0, eval_current=182, level=72, charging_source=0, charging_enabled=0, full_bat=1500000, over_vchg=0 at 6941379029006 (2017-02-04 07:26:05.246634983 UTC)
<6>[ 6943.976623] batt: SMEM_BATT: get_batt_info: batt_id=1, batt_vol=3904, batt_temp=240, batt_current=0, eval_current=182, level=72, charging_source=0, charging_enabled=0, full_bat=1500000, over_vchg=0 at 6941389954299 (2017-02-04 07:26:05.247642063 UTC)
<6>[ 6943.992614] healthd: battery l=72 v=3 t=24.0 h=2 st=4 chg=
<3>[ 6967.827758] CFG80211-ERROR) wl_notify_connect_status : Received WLC_E_DEAUTH_IND event with reason code: 6
<3>[ 6967.829559] CFG80211-ERROR) wl_notify_connect_status : link down, calling cfg80211_disconnected with deauth_reason:6
<6>[ 6967.833465] cfg80211: Calling CRDA to update world regulatory domain
<4>[ 6967.847747] link down, during connecting
<3>[ 6967.848052] CFG80211-ERROR) wl_bss_connect_done : Report connect result - connection failed
<4>[ 6967.924072] wl_bss_connect_done succeeded
<4>[ 6968.045806] wl_bss_connect_done succeeded
<4>[ 6969.128936] wl_bss_connect_done succeeded
<4>[ 6969.173004] wl_bss_connect_done succeeded
<6>[ 6969.226074] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
<4>[ 6969.563049] Unknown PRIVATE command WLS_BATCHING GET - ignored
<4>[ 6969.568511] Unknown PRIVATE command WLS_BATCHING STOP - ignored
<4>[ 6972.688934] mmc2: Starting deferred resume
<6>[ 6972.694976] supersonic_sdslot_switchvdd: Setting level to 2850 (Success)
<6>[ 6972.970397] mmc2: Deferred resume completed
<6>[ 6973.978607] batt: M2A_RPC: level_update: 71 at 6971382019727 (2017-02-04 07:26:35.249595186 UTC)
<6>[ 6973.980072] batt: batt:power_supply_changed: battery at 6971383454053 (2017-02-04 07:26:35.251090547 UTC)
<6>[ 6973.983917] batt: SMEM_BATT: get_batt_info: batt_id=1, batt_vol=3889, batt_temp=245, batt_current=0, eval_current=166, level=71, charging_source=0, charging_enabled=0, full_bat=1500000, over_vchg=0 at 6971388306347 (2017-02-04 07:26:35.254874726 UTC)
<6>[ 6973.998535] batt: SMEM_BATT: get_batt_info: batt_id=1, batt_vol=3889, batt_temp=245, batt_current=0, eval_current=166, level=71, charging_source=0, charging_enabled=0, full_bat=1500000, over_vchg=0 at 6971403229444 (2017-02-04 07:26:35.269462130 UTC)
<6>[ 6974.003234] healthd: battery l=71 v=3 t=24.5 h=2 st=4 chg=
<7>[ 6980.677185] wlan0: no IPv6 routers present
<6>[ 7003.973205] batt: M2A_RPC: level_update: 70 at 7001376404494 (2017-02-04 07:27:05.244224094 UTC)
<6>[ 7003.973724] batt: batt:power_supply_changed: battery at 7001376770705 (2017-02-04 07:27:05.244742893 UTC)
<6>[ 7003.975341] batt: SMEM_BATT: get_batt_info: batt_id=1, batt_vol=3844, batt_temp=254, batt_current=0, eval_current=420, level=70, charging_source=0, charging_enabled=0, full_bat=1500000, over_vchg=0 at 7001378662795 (2017-02-04 07:27:05.246360324 UTC)
<6>[ 7003.976196] batt: SMEM_BATT: get_batt_info: batt_id=1, batt_vol=3844, batt_temp=254, batt_current=0, eval_current=420, level=70, charging_source=0, charging_enabled=0, full_bat=1500000, over_vchg=0 at 7001399719923 (2017-02-04 07:27:05.247184299 UTC)
<6>[ 7004.009185] healthd: battery l=70 v=3 t=25.4 h=2 st=4 chg=
<6>[ 7033.973175] batt: M2A_RPC: level_update: 69 at 7031376312938 (2017-02-04 07:27:35.244193573 UTC)
<6>[ 7033.973632] batt: batt:power_supply_changed: battery at 7031376770702 (2017-02-04 07:27:35.244651337 UTC)
<6>[ 7033.975158] batt: SMEM_BATT: get_batt_info: batt_id=1, batt_vol=3896, batt_temp=258, batt_current=0, eval_current=134, level=69, charging_source=0, charging_enabled=0, full_bat=1500000, over_vchg=0 at 7031378449169 (2017-02-04 07:27:35.246177216 UTC)
<6>[ 7033.975952] batt: SMEM_BATT: get_batt_info: batt_id=1, batt_vol=3896, batt_temp=258, batt_current=0, eval_current=134, level=69, charging_source=0, charging_enabled=0, full_bat=1500000, over_vchg=0 at 7031389771191 (2017-02-04 07:27:35.246970673 UTC)
<6>[ 7033.992034] healthd: battery l=69 v=3 t=25.8 h=2 st=4 chg=
<6>[ 7063.973693] batt: M2A_RPC: level_update: 68 at 7061376831739 (2017-02-04 07:28:05.244681856 UTC)
<6>[ 7063.974151] batt: batt:power_supply_changed: battery at 7061377258985 (2017-02-04 07:28:05.245170138 UTC)
<6>[ 7063.975463] batt: SMEM_BATT: get_batt_info: batt_id=1, batt_vol=3851, batt_temp=264, batt_current=0, eval_current=362, level=68, charging_source=0, charging_enabled=0, full_bat=1500000, over_vchg=0 at 7061378845899 (2017-02-04 07:28:05.246451876 UTC)
<6>[ 7063.976257] batt: SMEM_BATT: get_batt_info: batt_id=1, batt_vol=3851, batt_temp=264, batt_current=0, eval_current=362, level=68, charging_source=0, charging_enabled=0, full_bat=1500000, over_vchg=0
<4>[ 7063.987304] msmfb_start_dma 25.177 ms after vsync request
<4>[ 7063.996826]  at 7061399628369 (2017-02-04 07:28:05.247245333 UTC)
<6>[ 7064.000549] healthd: battery l=68 v=3 t=26.4 h=2 st=4 chg=
<6>[ 7124.030944] batt: SMEM_BATT: get_batt_info: batt_id=1, batt_vol=3866, batt_temp=273, batt_current=0, eval_current=328, level=68, charging_source=0, charging_enabled=0, full_bat=1500000, over_vchg=0 at 7121434387891 (2017-02-04 07:29:05.301932833 UTC)
<6>[ 7124.031799] batt: SMEM_BATT: get_batt_info: batt_id=1, batt_vol=3866, batt_temp=273, batt_current=0, eval_current=328, level=68, charging_source=0, charging_enabled=0, full_bat=1500000, over_vchg=0 at 7121435211866 (2017-02-04 07:29:05.302817843 UTC)
<6>[ 7124.032958] healthd: battery l=68 v=3 t=27.3 h=2 st=4 chg=
<4>[ 7174.200897] select 4035 (id.defcontainer), adj 15, size 6117, to kill
<4>[ 7174.201141] select 5947 (id.partnersetup), adj 15, size 6525, to kill
<4>[ 7174.201416] select 5965 (ngs.android.pop), adj 15, size 6646, to kill
<4>[ 7174.201629] select 6181 (droid.deskclock), adj 15, size 6855, to kill
<4>[ 7174.201904] select 6258 (vervolv.updater), adj 15, size 9300, to kill
<4>[ 7174.202117] send sigkill to 6258 (vervolv.updater), adj 15, size 9300
<6>[ 7184.081054] batt: SMEM_BATT: get_batt_info: batt_id=1, batt_vol=3892, batt_temp=283, batt_current=0, eval_current=218, level=68, charging_source=0, charging_enabled=0, full_bat=1500000, over_vchg=0 at 7181483948439 (2017-02-04 07:30:05.352042697 UTC)
<6>[ 7184.081237] batt: SMEM_BATT: get_batt_info: batt_id=1, batt_vol=3892, batt_temp=283, batt_current=0, eval_current=218, level=68, charging_source=0, charging_enabled=0, full_bat=1500000, over_vchg=0 at 7181484131544 (2017-02-04 07:30:05.352256320 UTC)
<6>[ 7184.082000] healthd: battery l=68 v=3 t=28.3 h=2 st=4 chg=


Broadcasting: Intent { act=com.evervolv.toolbox.action.DUMPLOGCAT_FINISHED (has extras) }
Broadcast completed: result=0