Evervolv Paste

Logcat: ev_tenderloin-5.1.1-testing-2015.10.02

From EVLogcat Uploader, 8 Years ago, written in Plain Text, viewed 573 times.
URL http://paste.evervolv.com/view/2ce815f6 Embed
Download Paste or View Raw
  1. ------ LAST KMSG (/proc/last_klog) ------
  2. platform_init_mmu_mappings: entry
  3. platform_init_mmu_mappings:57: mapping shared ram as uncached at 0x40000000
  4. platform_init_mmu_mappings: exit
  5. platform_init_timer: entry
  6. platform_init_timer: exit
  7. platform_set_periodic_timer:39: cb 0x4010c6bd, arg 0x0, interval 10
  8. ******************************************
  9. * Welcome to bootie!
  10. *   Version: 468
  11. ******************************************
  12. mmch_init: entry
  13. mmch_init: exit
  14. usbc: initialized (rc=0)
  15. target_init_buttonscan: entry
  16. target_init_board_id: emu=0, product=0x1, hwbuild=1
  17. boardtype=topaz-Wifi-pvt
  18. Memory bank 0 -> address: 0x40200000-0x46700000 size:0x06500000
  19. Memory bank 1 -> address: 0x48000000-0x7ff00000 size:0x37F00000
  20. i2c_init: Register GSBI 3 as i2c bus 0
  21. i2c_init_clock: The i2c clock rate is 19200000
  22. i2c_init: Register GSBI 4 as i2c bus 1
  23. i2c_init_clock: The i2c clock rate is 19200000
  24. i2c_init: Register GSBI 9 as i2c bus 2
  25. i2c_init_clock: The i2c clock rate is 19200000
  26. i2c_init: Register GSBI 8 as i2c bus 3
  27. i2c_init_clock: The i2c clock rate is 19200000
  28. i2c_init: Register GSBI 7 as i2c bus 4
  29. i2c_init_clock: The i2c clock rate is 19200000
  30. a6_init_sbw_pins: TCK: 157, TDIO; 158, WKUP: 155
  31. max8903b_gpio_init
  32. Starting battery authentication...
  33. Battery auth succeeded
  34. sys_init: entry
  35. Wall message(Boot reason) = 0x6f656d44 ("reboot")
  36. sys_init: booted because 'reboot'
  37. mmch_reset: entry
  38. Bus(0) Primecell ID regs:
  39. 0x80 0x11 0x4 0x0
  40. 0xd 0xf0 0x5 0xb1
  41. sdc1_clk_set 400000
  42. mmch_set_active:727: bus 0, active 1
  43. sdc1_clk_set 400000
  44. mmch_reset: exit
  45. mmch_set_active:727: bus 0, active 1
  46. sdc1_clk_set 400000
  47. cid: 0x2010053 0x454d3332 0x4790b0ad 0xca1b6e66
  48.         mfg id: 0x2
  49.         oem id: 0x100
  50.         name: 'SEM32G'
  51.         rev: 0x90
  52.         sn: 0xb0adca1b
  53.         date: 6.2011
  54. sdc1_clk_set 50000000
  55. token section is 10240 bytes long
  56. target_check_boot_condition: entry
  57. Wall message(Boot reason) = 0x6f656d44 ("reboot")
  58. display_init: displayWidth: 1024, displayHeight: 768
  59. Wall message(Boot reason) = 0x6f656d44 ("reboot")
  60. p=68 ca=3382400 v=3884480 i=171718
  61. autobooting with 'fsboot' command
  62. loading file '/boot/uImage' to address 0x41000000
  63. parse_uimage:241: uimage 0x41000000
  64. <6>[    0.000000] Booting Linux on physical CPU 0
  65. <6>[    0.000000] Initializing cgroup subsys cpu
  66. <5>[    0.000000] Linux version 3.4.106-tenderloin+ (flintman@mx.thenoblealliance.com) (gcc version 4.7 (GCC) ) #1 SMP PREEMPT Fri Oct 2 13:15:13 EDT 2015
  67. <4>[    0.000000] CPU: ARMv7 Processor [510f02d2] revision 2 (ARMv7), cr=10c5387d
  68. <4>[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIVT ASID tagged instruction cache
  69. <4>[    0.000000] Machine: tenderloin
  70. <6>[    0.000000] memory pool 0 (start 38000000 size 600000) initialized
  71. <6>[    0.000000] memory pool 1 (start 38600000 size 3802000) initialized
  72. <6>[    0.000000] memory pool 3 (start 76400000 size 9200000) initialized
  73. <4>[    0.000000] Memory policy: ECC disabled, Data cache writealloc
  74. <3>[    0.000000] smem_find(137, 80): wrong size 64
  75. <3>[    0.000000] smem_find(137, 72): wrong size 64
  76. <6>[    0.000000] socinfo_init: v5, id=86, ver=2.0, raw_id=1696, raw_ver=1696, hw_plat=0,  hw_plat_ver=65536
  77. <6>[    0.000000]  accessory_chip=0
  78. <7>[    0.000000] On node 0 totalpages: 215296
  79. <7>[    0.000000] free_area_init_node: node 0, pgdat 80a04e40, node_mem_map 80ca2000
  80. <7>[    0.000000]   Normal zone: 2024 pages used for memmap
  81. <7>[    0.000000]   Normal zone: 0 pages reserved
  82. <7>[    0.000000]   Normal zone: 213272 pages, LIFO batch:31
  83. <6>[    0.000000] passing from bootie 9437184 bytes at 7f600000 physical for fb
  84. <6>[    0.000000] PERCPU: Embedded 6 pages/cpu @81497000 s12160 r0 d12416 u32768
  85. <7>[    0.000000] pcpu-alloc: s12160 r0 d12416 u32768 alloc=8*4096
  86. <7>[    0.000000] pcpu-alloc: [0] 0 [0] 1
  87. <4>[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 213272
  88. <5>[    0.000000] Kernel command line: androidboot.selinux=permissive root=/dev/ram0 rootwait ro fbcon=disable console=ttyS0,115200n8 androidboot.serialno=625OC6A5M28MOGIHSL4NB9ONKOMR7Q45  fb=0x7f600000 nduid=6441ccc8a26502b81ac8cb29bb21eb41bdd74392 klog=0x7ff00000 klog_len=0x100000 boardtype=topaz-Wifi-pvt lastboot=reboot
  89. <6>[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
  90. <6>[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  91. <6>[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  92. <6>[    0.000000] allocated 2072576 bytes of page_cgroup
  93. <6>[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
  94. <6>[    0.000000] Memory: 101MB 740MB = 841MB total
  95. <5>[    0.000000] Memory: 836448k/836448k available, 174240k reserved, 0K highmem
  96. <5>[    0.000000] Virtual kernel memory layout:
  97. <5>[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
  98. <5>[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
  99. <5>[    0.000000]     vmalloc : 0xbf800000 - 0xff000000   (1016 MB)
  100. <5>[    0.000000]     lowmem  : 0x80000000 - 0xbf400000   (1012 MB)
  101. <5>[    0.000000]     pkmap   : 0x7fe00000 - 0x80000000   (   2 MB)
  102. <5>[    0.000000]       .text : 0x80008000 - 0x80912ccc   (9260 kB)
  103. <5>[    0.000000]       .init : 0x80913000 - 0x80958f80   ( 280 kB)
  104. <5>[    0.000000]       .data : 0x8095a000 - 0x80a24178   ( 809 kB)
  105. <5>[    0.000000]        .bss : 0x80a2419c - 0x80c9de98   (2536 kB)
  106. <6>[    0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
  107. <6>[    0.000000] Preemptible hierarchical RCU implementation.
  108. <6>[    0.000000] NR_IRQS:855
  109. <6>[    0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms
  110. <6>[    0.000000] Switching to timer-based delay loop
  111. <7>[    0.000000] ODEBUG: 4 of 4 active objects replaced
  112. <6>[    0.001922] Calibrating delay loop (skipped), value calculated using timer frequency.. 13.50 BogoMIPS (lpj=67500)
  113. <6>[    0.001953] pid_max: default: 32768 minimum: 301
  114. <6>[    0.002258] Security Framework initialized
  115. <6>[    0.002288] SELinux:  Initializing.
  116. <7>[    0.002380] SELinux:  Starting in permissive mode
  117. <6>[    0.002502] Mount-cache hash table entries: 512
  118. <6>[    0.004302] Initializing cgroup subsys cpuacct
  119. <6>[    0.004302] Initializing cgroup subsys memory
  120. <6>[    0.004394] Initializing cgroup subsys freezer
  121. <6>[    0.004394] Initializing cgroup subsys bfqio
  122. <6>[    0.004486] CPU: Testing write buffer coherency: ok
  123. <6>[    0.004791] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  124. <6>[    0.004821] hw perfevents: enabled with ARMv7 Scorpion-MP PMU driver, 5 counters available
  125. <6>[    0.004974] Setting up static identity map for 0x408b08c8 - 0x408b092c
  126. <6>[    0.037017] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  127. <6>[    0.037170] Brought up 2 CPUs
  128. <6>[    0.037200] SMP: Total of 2 processors activated (27.00 BogoMIPS).
  129. <6>[    0.055908] VFP support v0.3: implementor 51 architecture 64 part 2d variant 0 rev 0
  130. <6>[    0.057464] dummy:
  131. <6>[    0.058074] NET: Registered protocol family 16
  132. <6>[    0.059173] DMA: preallocated 256 KiB pool for atomic coherent allocations
  133. <3>[    0.059387] AXI: msm_bus_fabric_init_driver(): msm_bus_fabric_init_driver
  134. <6>[    0.060791] meminfo_init: smem ram ptable found: ver: 0 len: 7
  135. <6>[    0.060821] Found 2 memory banks grouped into 16 memory regions
  136. <6>[    0.061157] gpiochip_add: registered GPIOs 0 to 172 on device: msmgpio
  137. <6>[    0.062225] msm_tsens_early_init: done
  138. <6>[    0.062286] msm_rpm_init: RPM firmware 2.0.67653
  139. <4>[    0.062438] Choosing tenderloin_pins_wifi
  140. <3>[    0.094757] msm_rpm_get_status(): Status id 433 not defined for target
  141. <3>[    0.124694] tenderloin_init_gpiomux: >= TOPAZ_DVT
  142. <6>[    0.126098] saw_probe: id=0, name=8901_s0
  143. <6>[    0.126708] saw_probe: id=1, name=8901_s1
  144. <6>[    0.133850] pm8058_probe: PMIC revision: E3
  145. <6>[    0.136108] gpiochip_add: registered GPIOs 173 to 212 on device: pm-gpio
  146. <6>[    0.136535] pm_gpio_probe: OK: base=173, ngpio=40
  147. <6>[    0.136932] gpiochip_add: registered GPIOs 213 to 224 on device: pm8xxx-mpp
  148. <6>[    0.137054] pm8xxx_mpp_probe: OK: base=213, ngpio=12
  149. <6>[    0.139953] pm8901_probe: PMIC revision reg: F4
  150. <6>[    0.139953] pm8901_probe: PMIC version: PM8901 rev 2.1
  151. <6>[    0.140930] gpiochip_add: registered GPIOs 225 to 228 on device: pm8xxx-mpp
  152. <6>[    0.140991] pm8xxx_mpp_probe: OK: base=225, ngpio=4
  153. <3>[    0.146575] Registering a6_0 device.
  154. <3>[    0.146636] Registering a6_1 device.
  155. <4>[    0.148223] 8058_s3: Failed to create debugfs directory
  156. <6>[    0.148590] board_setup_S3A_1V8: 8058_s3: forcing HPM mode (2)
  157. <7>[    0.148620] tenderloin_init_keypad
  158. <3>[    0.148925] tenderloin_init: --
  159. <6>[    0.148986] hw-breakpoint: found 3 (+1 reserved) breakpoint and 1 watchpoint registers.
  160. <6>[    0.148986] hw-breakpoint: maximum watchpoint size is 8 bytes.
  161. <6>[    0.192871] bio: create slab <bio-0> at 0
  162. <7>[    0.194580] reg-fixed-voltage reg-fixed-voltage.0: vdd50_boost supplying 5000000uV
  163. <6>[    0.196746] ION heap vmalloc created
  164. <6>[    0.196868] ION heap mm created at 38200000 with size 3600000
  165. <6>[    0.196929] ION heap mm_fw created at 38000000 with size 200000
  166. <6>[    0.197021] ION heap mfc created at 3b800000 with size 2000
  167. <6>[    0.197357] ION heap sf created at 76401000 with size 4000000
  168. <6>[    0.197631] ION heap camera_preview created at 7a401000 with size 4000000
  169. <6>[    0.197723] ION heap wb created at 7e401000 with size 600000
  170. <6>[    0.197845] ION heap qsecom created at 7ea01000 with size 600000
  171. <6>[    0.197937] ION heap audio created at 7f001000 with size 28b000
  172. <5>[    0.198242] pmic8058_pwm_probe: OK
  173. <6>[    0.198364] klog_init: phys buffer at 0x7ff00000
  174. <6>[    0.198455] klog_init: virt address at 0xbfe00000
  175. <6>[    0.198486] klog_init: found valid klog, len 1048576
  176. <6>klog_init: using buffer 1 at 0xbfe40018, length 262116
  177. <6>klog_init: last_klog head=66733 tail=0 size=66733
  178. <6>klog_init: last_klog2 head=65176 tail=0 size=65176
  179. <6>klog_init: last_klog3 head=73571 tail=0 size=73571
  180. <5>SCSI subsystem initialized
  181. <6>usbcore: registered new interface driver usbfs
  182. <6>usbcore: registered new interface driver hub
  183. <6>usbcore: registered new device driver usb
  184. <6>input: pmic8xxx_pwrkey as /devices/platform/msm_ssbi.0/pm8058-core/pm8xxx-pwrkey/input/input0
  185. <6>Advanced Linux Sound Architecture Driver Version 1.0.25.
  186. <6>Bluetooth: Core ver 2.16
  187. <6>NET: Registered protocol family 31
  188. <6>Bluetooth: HCI device and connection manager initialized
  189. <6>Bluetooth: HCI socket layer initialized
  190. <6>Bluetooth: L2CAP socket layer initialized
  191. <6>Bluetooth: SCO socket layer initialized
  192. <6>cfg80211: Calling CRDA to update world regulatory domain
  193. <6>Switching to clocksource gp_timer
  194. <6>NET: Registered protocol family 2
  195. <6>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
  196. <6>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
  197. <6>TCP bind hash table entries: 65536 (order: 8, 1310720 bytes)
  198. <6>TCP: Hash tables configured (established 131072 bind 65536)
  199. <6>TCP: reno registered
  200. <6>UDP hash table entries: 512 (order: 2, 24576 bytes)
  201. <6>UDP-Lite hash table entries: 512 (order: 2, 24576 bytes)
  202. <6>NET: Registered protocol family 1
  203. <6>RPC: Registered named UNIX socket transport module.
  204. <6>RPC: Registered udp transport module.
  205. <6>RPC: Registered tcp transport module.
  206. <6>RPC: Registered tcp NFSv4.1 backchannel transport module.
  207. <6>Trying to unpack rootfs image as initramfs...
  208. <6>Freeing initrd memory: 956K
  209. <6>Detected 5 counters on the L2CC PMU.
  210. <6>pil_qdsp6v3 pil_qdsp6v3: using non-secure boot
  211. <3>smd_channel_probe_worker: allocation table not initialized
  212. <6>snddev_icodec_probe: msm_codec_i2s_slave_mode = 0
  213. <4>8058_s4: Failed to create debugfs directory
  214. <6>dspcrashd_probe: Platform driver values: Base = 0x46700000, Size = 0x2000000,pdata = 0xdeaddead
  215. <6>Max ACPU freq: 1782000 KHz
  216. <4>8901_s0: Failed to create debugfs directory
  217. <4>8901_s1: Failed to create debugfs directory
  218. <6>CPU0: 28 scaling frequencies supported.
  219. <6>CPU1: 28 scaling frequencies supported.
  220. <6>audit: initializing netlink socket (disabled)
  221. <5>type=2000 audit(0.300:1): initialized
  222. <6>NTFS driver 2.1.30 [Flags: R/W].
  223. <6>fuse init (API version 7.18)
  224. <6>msgmni has been set to 1635
  225. <7>SELinux:  Registering netfilter hooks
  226. <6>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
  227. <6>io scheduler noop registered (default)
  228. <6>io scheduler deadline registered
  229. <6>io scheduler row registered
  230. <6>io scheduler cfq registered
  231. <6>io scheduler fiops registered
  232. <6>io scheduler bfq registered
  233. <6>BFQ I/O-scheduler: v7r8<6>mipi_dsi base phy_addr = 0x4700000 virt = 0xc0a00000
  234. <6>mmss_sfpb  base phy_addr = 0x5700000,virt = 0xbf878000
  235. <6>
  236.  msm_vidc_enc: Inside vid_enc_init()<6>
  237.  msm_vidc_enc: Inside vid_enc_vcd_init()<6>msm_serial_hs module loaded
  238. <6>[BT]msm_serial_hs module loaded
  239. <6>msm_serial_hsl: detected port #0
  240. <6>msm_serial_hsl.0: ttyHSL0 at MMIO 0x19c40000 (irq = 227) is a MSM
  241. <6>msm_serial_hsl: driver initialized
  242. <6>msm_rotator_probe: rotator_hw_revision=1
  243. <6>kgsl kgsl-3d0: |kgsl_gpummu_init| MMU type set for device is GPUMMU
  244. <6>kgsl kgsl-2d0: |kgsl_gpummu_init| MMU type set for device is GPUMMU
  245. <6>kgsl kgsl-2d1: |kgsl_gpummu_init| MMU type set for device is GPUMMU
  246. <6>brd: module loaded
  247. <6>loop: module loaded
  248. <6>lkdtm: No crash points registered, enable through debugfs
  249. <6>pmem: Initializing pmem_adsp as non-cached
  250. <3>pmem: Cannot allocate from reserved memory for pmem_adsp
  251. <4>android_pmem: probe of android_pmem.2 failed with error -1
  252. <6>pmem: Initializing pmem_audio as non-cached
  253. <6>allocating 2666496 bytes at 7f28c000 physical for pmem_audio
  254. <4>8058_l18: Failed to create debugfs directory
  255. <6>Before a6 call to i2c_add_driver.
  256. <3>a6_init_state: enabling A6 internal wake.
  257. <3>a6_init_state: TS2_I2C_WAKEUP_PERIOD = 0x1b
  258. <6>A6 Version: HW: 255, FW (M.m.B): 2.13.25, ManID: 28769, ProdTyp: 1281
  259. <5>A6 driver initialized successfully!
  260. <3>a6_init_state: enabling A6 internal wake.
  261. <3>a6_init_state: TS2_I2C_WAKEUP_PERIOD = 0x1b
  262. <6>A6 Version: HW: 255, FW (M.m.B): 2.7.29, ManID: 28769, ProdTyp: 1793
  263. <5>A6 driver initialized successfully!
  264. <4>i2c-core: driver [a6] using legacy suspend method
  265. <4>i2c-core: driver [a6] using legacy resume method
  266. <6>nduid: 6441ccc8a26502b81ac8cb29bb21eb41bdd74392
  267. <3>hsuart_rxtx_lists_init: init 80b8c544
  268. <3>hsuart_rxtx_lists_init: init 80b8c578
  269. hsuart_tty:created 'ttyHS0' device on UART 0
  270. mdmgpio_init
  271. mdmgpio_probe
  272. <3>msm_wm8958_setup_power: codec power setup
  273. <4>vdd50_boost: Failed to create debugfs directory
  274. <4>8058_s3: Failed to create debugfs directory
  275. <3>wm8994_ldo_power: Power up the WM8994 LDOs
  276. <6>wm8994 4-001a: WM8958 revision B
  277. <4>wm8994 4-001a: No interrupt specified, no interrupts
  278. <7>gpiochip_find_base: found new base at 501
  279. <6>gpiochip_add: registered GPIOs 501 to 511 on device: wm8994
  280. <6>SCSI Media Changer driver v0.25
  281. <6>tun: Universal TUN/TAP device driver, 1.6
  282. <6>tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  283. <6>PPP generic driver version 2.4.2
  284. <6>PPP BSD Compression module registered
  285. <6>PPP Deflate Compression module registered
  286. <6>PPP MPPE Compression module registered
  287. <6>NET: Registered protocol family 24
  288. <6>SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
  289. <6>CSLIP: code copyright 1989 Regents of the University of California.
  290. <3>board_sdio_wifi_enable
  291. <4>8058_s3: Failed to create debugfs directory
  292. <4>8901_l3: Failed to create debugfs directory
  293. <4>8901_l1: Failed to create debugfs directory
  294. <4>8058_l19: Failed to create debugfs directory
  295. <6>wifi_power(1) 1.8V sdio: set load
  296. <6>tenderloin_wifi_power: New regulator mode for 8058_s3: 2
  297. <6>wifi_power(1) 3.3V
  298. <6>wifi_power(1) 8901_l1 3.3V
  299. <6>wifi_power(1) 8058_l19 1.8V
  300. wifi_power(1) CHIP_PWD
  301. <4>8058_s1: Failed to create debugfs directory
  302. <4>8058_l6: Failed to create debugfs directory
  303. <4>8058_l7: Failed to create debugfs directory
  304. <3>Error: Driver 'msm_otg' is already registered, aborting...
  305. <6>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  306. <3>Rate 2147483647 for jpegd_clk is greater than highest Fmax
  307. <6>host driver registered w/ tranceiver
  308. <6>usbcore: registered new interface driver cdc_acm
  309. <6>cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
  310. <6>usbcore: registered new interface driver cdc_wdm
  311. <6>Initializing USB Mass Storage driver...
  312. <6>usbcore: registered new interface driver usb-storage
  313. <6>USB Mass Storage support registered.
  314. <6>usbcore: registered new interface driver ums-alauda
  315. <6>usbcore: registered new interface driver ums-cypress
  316. <6>usbcore: registered new interface driver ums-datafab
  317. <6>usbcore: registered new interface driver ums-freecom
  318. <6>usbcore: registered new interface driver ums-isd200
  319. <6>usbcore: registered new interface driver ums-jumpshot
  320. <6>usbcore: registered new interface driver ums-karma
  321. <6>usbcore: registered new interface driver ums-onetouch
  322. <6>usbcore: registered new interface driver ums-sddr09
  323. <6>usbcore: registered new interface driver ums-sddr55
  324. <6>usbcore: registered new interface driver ums-usbat
  325. <6>usbcore: registered new interface driver usbserial
  326. <6>usbserial: USB Serial Driver core
  327. <6>usbcore: registered new interface driver usb_ehset_test
  328. <6>peripheral driver registered w/ tranceiver
  329. <6>mbim_init: initialize 1 instances
  330. <6>mbim_init: Initialized 1 ports
  331. <6>rndis_qc_init: initialize rndis QC instance
  332. <6>android_usb gadget: Mass Storage Function, version: 2009/09/11
  333. <6>android_usb gadget: Number of LUNs=1
  334. <6> lun0: LUN: removable file: (no medium)
  335. <6>android_usb gadget: android_usb ready
  336. <4>8058_l10: Failed to create debugfs directory
  337. <4>vdd50_boost: Failed to create debugfs directory
  338. <6>GPIO Input Driver: Start gpio inputs for tenderloin-keypad in interrupt mode
  339. <6>input: tenderloin-keypad as /devices/virtual/input/input1
  340. <6>i2c i2c-0: mpu3050: +lsm303dlha
  341. <6>i2c i2c-0: mpu3050: +lsm303dlhm
  342. <4>i2c i2c-0: WARNING: Compass irq not assigned
  343. <4>i2c i2c-0: mpu3050: No Pressure Present
  344. <6>gpio_keys_scan_keys: key 1-73, 0 (103) changed to 0
  345. <6>gpio_keys_scan_keys: key 1-72, 1 (104) changed to 0
  346. <6>gpio_keys_scan_keys: key 1-ac, 2 (40) changed to 0
  347. <3>ulpi_read: timeout 48300000
  348. <6>i2c i2c-0: Installing irq using 381
  349. <6>i2c i2c-0: Module Param interface = mpuirq
  350. <4>i2c-core: driver [mpu3050] using legacy suspend method
  351. <4>i2c-core: driver [mpu3050] using legacy resume method
  352. <7>mpu_init
  353. <6><6>lsm303dlh magnetometer driver
  354. <3>lsm303dlh_mag_sysfs: probe start
  355. <6>input: lsm303dlh_mag_sysfs as /devices/i2c-0/0-001e/input/input2
  356. <6>lsm303dlh_mag_sysfs 0-001e: lsm303dlh_mag probed
  357. <7>lsm303dlh_acc_sysfs accelerometer driver: init
  358. <6>lsm303dlh_acc_sysfs: probe start.
  359. <6>lsm303dlh_acc_sysfs: hw init start
  360. <6>lsm303dlh_acc_sysfs: hw init done
  361. <6>input: lsm303dlh_acc_sysfs as /devices/i2c-0/0-0018/input/input3
  362. <6>lsm303dlh_acc_sysfs 0-0018: lsm303dlh_acc_sysfs: probed
  363. <4>i2c-core: driver [lsm303dlh_acc_sysfs] using legacy suspend method
  364. <4>i2c-core: driver [lsm303dlh_acc_sysfs] using legacy resume method
  365. <6>input: isl29023 light sensor as /devices/virtual/input/input4
  366. isl29023 input_dev success
  367. <6>isl29023 0-0044: driver version 1.0 enabled
  368. <4>i2c-core: driver [isl29023] using legacy suspend method
  369. <4>i2c-core: driver [isl29023] using legacy resume method
  370. <6>using rtc device, pm8xxx_rtc, for alarms<6>rtc-pm8xxx rtc-pm8xxx: rtc core: registered pm8xxx_rtc as rtc0
  371. <6>i2c /dev entries driver
  372. <6>lirc_dev: IR Remote Control driver registered, major 240
  373. <6>IR RC5 (streamzap) protocol handler initialized
  374. <6>IR SANYO protocol handler initialized
  375. <6>IR MCE Keyboard/mouse protocol handler initialized
  376. <6>IR LIRC bridge handler initialized
  377. <6>Linux video capture interface: v2.00
  378. +++ config_camera_on_gpios_web_cam_mt9m113
  379. <4>8058_lvs0: Failed to create debugfs directory
  380. config_camera_on_gpios_web_cam_mt9m113:enable the regulator votg_lvs0 succeed
  381. <4>8058_l11: Failed to create debugfs directory
  382. config_camera_on_gpios_web_cam_mt9m113:enable the regulator votg_vreg_l11 succeed
  383. --- config_camera_on_gpios_web_cam_mt9m113
  384. <4>fs_vfe: Failed to create debugfs directory
  385. <3>ulpi_read: timeout 48300000
  386. +++ config_camera_off_gpios_web_cam_mt9m113
  387. config_camera_off_gpios_web_cam_mt9m113:disable the regulator: votg_lvs0 succeed
  388. config_camera_off_gpios_web_cam_mt9m113:disable the regulator: votg_vreg_l11 succeed
  389. --- config_camera_off_gpios_web_cam_mt9m113
  390. <6>msm_sync_init: initialized mt9m113
  391. <6>max8903b driver registeration! rc = 0
  392. <6>msm_adc successfully registered
  393. <5>tsens_tm_init: OK
  394. <6>device-mapper: uevent: version 1.0.3
  395. <6>device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
  396. <6>device-mapper: multipath: version 1.3.2 loaded
  397. <6>device-mapper: multipath round-robin: version 1.0.0 loaded
  398. <6>device-mapper: multipath queue-length: version 0.1.0 loaded
  399. <6>device-mapper: multipath service-time: version 0.2.0 loaded
  400. <6>Bluetooth: HCI UART driver ver 2.2
  401. <6>Bluetooth: HCI H4 protocol initialized
  402. <6>Bluetooth: HCI BCSP protocol initialized
  403. <6>cpuidle: using governor ladder
  404. <6>cpuidle: using governor menu
  405. <6>mmc0: SDCC Version: 0x00000000
  406. <3>mmc0: No card detect facilities available
  407. <4>8901_l5: Failed to create debugfs directory
  408. <4>8901_lvs0: Failed to create debugfs directory
  409. <6>mmc0: Qualcomm MSM SDCC-core at 0x0000000012400000 irq 136,0 dma 18 dmacrcri 1
  410. <6>mmc0: Controller capabilities: 0x00000001
  411. <6>mmc0: 8 bit data mode enabled
  412. <6>mmc0: 4 bit data mode disabled
  413. <6>mmc0: polling status mode disabled
  414. <6>mmc0: MMC clock 400000 -> 48000000 Hz, PCLK 0 Hz
  415. <6>mmc0: Slot eject status = 0
  416. <6>mmc0: Power save feature enable = 1
  417. <6>mmc0: DM non-cached buffer at bfb01000, dma_addr 0x74940000
  418. <6>mmc0: DM cmd busaddr 0x74940000, cmdptr busaddr 0x74957f40
  419. <6>mmc1: SDCC Version: 0x00000000
  420. <3>mmc1: No card detect facilities available
  421. <4>8058_s3: Failed to create debugfs directory
  422. <6>mmc1: Qualcomm MSM SDCC-core at 0x00000000121c0000 irq 133,0 dma 21 dmacrcri 5
  423. <6>mmc1: Controller capabilities: 0x00000001
  424. <6>mmc1: 8 bit data mode disabled
  425. <6>mmc1: 4 bit data mode enabled
  426. <6>mmc1: polling status mode disabled
  427. <6>mmc1: MMC clock 400000 -> 48000000 Hz, PCLK 0 Hz
  428. <6>mmc1: Slot eject status = 0
  429. <6>mmc1: Power save feature enable = 1
  430. <6>mmc1: DM non-cached buffer at bfb1a000, dma_addr 0x74960000
  431. <6>mmc1: DM cmd busaddr 0x74960000, cmdptr busaddr 0x74977f40
  432. tenderloin_probe_wifi: id 4 mmc b5a17000
  433. <3>board_sdio_wifi_enable
  434. <7>LM8502 module init called
  435. <7>LM8502 probe called
  436. <3>ulpi_read: timeout 48300000
  437. <3>ulpi_read: timeout 48300000
  438. <3>qup_i2c qup_i2c.3: QUP: I2C status flags :0x1343c8, irq:193
  439. <3>qup_i2c qup_i2c.3: I2C slave addr:0x33 not connected
  440. <3>Unable to read LM8502 registers
  441. <7>Registered led device: core_navi_left
  442. <7>Registered led device: core_navi_right
  443. <4>i2c-core: driver [LM8502] using legacy suspend method
  444. <4>i2c-core: driver [LM8502] using legacy resume method
  445. <6>usbcore: registered new interface driver usbhid
  446. <6>usbhid: USB HID core driver
  447. <6>zram: num_devices not specified. Using default: 1
  448. <6>zram: Creating 1 devices ...
  449. <6>ashmem: initialized
  450. <6>logger: created 256K log 'log_main'
  451. <6>logger: created 256K log 'log_events'
  452. <6>logger: created 256K log 'log_radio'
  453. <6>logger: created 256K log 'log_system'
  454. <6>mmc0: disabling BKOPS
  455. <6>msm-cpu-dai msm-cpu-dai.0: asoc_msm_cpu_probe: dev name msm-cpu-dai.0
  456. <6>msm-codec-dai msm-codec-dai.0: asoc_msm_codec_probe: dev name msm-codec-dai.0
  457. <6>msm-dsp-audio msm-dsp-audio.0: msm_pcm_probe: dev name msm-dsp-audio.0
  458. <6>mmc0: new high speed MMC card at address 0001
  459. <6>mmcblk0: mmc0:0001 SEM32G 29.7 GiB
  460. <3>msm_wm8958_shutdown_power: codec power shutdown
  461. <4>vdd50_boost: Failed to create debugfs directory
  462. <3>wm8994_ldo_power: Power down the WM8994 LDOs
  463. <6> mmcblk0: p1 p2 p3 p4 < p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 >
  464. <6>asoc: wm8994-aif1 <-> msm-cpu-dai.0 mapping ok
  465. <6>asoc: wm8994-aif2 <-> msm-cpu-dai.0 mapping ok
  466. <6>input: msm-audio headset as /devices/platform/soc-audio/sound/card0/input5
  467. <6>GACT probability NOT on
  468. <6>Mirror/redirect action on
  469. Failed to load ipt action
  470. <6>u32 classifier
  471. <6>    Performance counters on
  472. <6>    input device check on
  473. <6>    Actions configured
  474. <6>Netfilter messages via NETLINK v0.30.
  475. <6>nf_conntrack version 0.5.0 (13084 buckets, 52336 max)
  476. <6>ctnetlink v0.93: registering with nfnetlink.
  477. <6>NF_TPROXY: Transparent proxy support initialized, version 4.1.0
  478. <6>NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
  479. <6>xt_time: kernel timezone is -0000
  480. <6>ip_tables: (C) 2000-2006 Netfilter Core Team
  481. <6>arp_tables: (C) 2002 David S. Miller
  482. <6>TCP: cubic registered
  483. <6>NET: Registered protocol family 10
  484. <6>Mobile IPv6
  485. <6>ip6_tables: (C) 2000-2006 Netfilter Core Team
  486. <6>IPv6 over IPv4 tunneling driver
  487. <6>NET: Registered protocol family 17
  488. <6>NET: Registered protocol family 15
  489. <6>Bluetooth: RFCOMM TTY layer initialized
  490. <6>Bluetooth: RFCOMM socket layer initialized
  491. <6>Bluetooth: RFCOMM ver 1.11
  492. <6>Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  493. <6>Bluetooth: BNEP filters: protocol multicast
  494. <6>Bluetooth: BNEP socket layer initialized
  495. <6>Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  496. <6>Bluetooth: HIDP socket layer initialized
  497. <6>L2TP core driver, V2.0
  498. <6>PPPoL2TP kernel driver, V2.0
  499. <6>L2TP IP encapsulation support (L2TPv3)
  500. <6>L2TP netlink interface
  501. <6>L2TP ethernet pseudowire support (L2TPv3)
  502. <3>lcdc_tenderloin_panel_init: +++++++++++++++++++++++
  503. <3>lcdc_tenderloin_probe: ++
  504. <6>Lcdc_tenderloin_probe: bl_pwm0=b5bde400 LPG_chan0=0
  505. <6>setting pdata->panel_info.fb_num to 3. type: 3
  506. <4>------------[ cut here ]------------
  507. <4>WARNING: at /home/flintman/source/ever/loll-5.1/kernel/htc/msm8960/arch/arm/mach-msm/clock-local.c:424 rcg_clk_prepare+0x2c/0x48()
  508. Attempting to prepare pixel_mdp_clk before setting its rate. Set the rate first!
  509. [<80014d00>] (unwind_backtrace+0x0/0x11c) from [<80078fa4>] (warn_slowpath_common+0x48/0x60)
  510. [<80078fa4>] (warn_slowpath_common+0x48/0x60) from [<80079014>] (warn_slowpath_fmt+0x2c/0x3c)
  511. [<80079014>] (warn_slowpath_fmt+0x2c/0x3c) from [<8005bdc0>] (rcg_clk_prepare+0x2c/0x48)
  512. [<8005bdc0>] (rcg_clk_prepare+0x2c/0x48) from [<80022788>] (clk_prepare+0x94/0xe0)
  513. [<80022788>] (clk_prepare+0x94/0xe0) from [<802ddc54>] (cont_splash_clk_ctrl.part.0+0x14/0x74)
  514. [<802ddc54>] (cont_splash_clk_ctrl.part.0+0x14/0x74) from [<802ddefc>] (lcdc_probe+0xc4/0x1fc)
  515. [<802ddefc>] (lcdc_probe+0xc4/0x1fc) from [<803535b8>] (platform_drv_probe+0x14/0x18)
  516. [<803535b8>] (platform_drv_probe+0x14/0x18) from [<8035222c>] (driver_probe_device+0x13c/0x348)
  517. [<8035222c>] (driver_probe_device+0x13c/0x348) from [<80350d44>] (bus_for_each_drv+0x48/0x8c)
  518. [<80350d44>] (bus_for_each_drv+0x48/0x8c) from [<80352584>] (device_attach+0x7c/0xa0)
  519. [<80352584>] (device_attach+0x7c/0xa0) from [<80350f18>] (bus_probe_device+0x28/0x98)
  520. [<80350f18>] (bus_probe_device+0x28/0x98) from [<8034f594>] (device_add+0x3f4/0x5a8)
  521. [<8034f594>] (device_add+0x3f4/0x5a8) from [<80353ab4>] (platform_device_add+0x12c/0x19c)
  522. [<80353ab4>] (platform_device_add+0x12c/0x19c) from [<802c7ecc>] (msm_fb_add_device+0x154/0x1b0)
  523. [<802c7ecc>] (msm_fb_add_device+0x154/0x1b0) from [<806977a0>] (lcdc_tenderloin_probe+0x78/0x98)
  524. [<806977a0>] (lcdc_tenderloin_probe+0x78/0x98) from [<803535b8>] (platform_drv_probe+0x14/0x18)
  525. [<803535b8>] (platform_drv_probe+0x14/0x18) from [<8035222c>] (driver_probe_device+0x13c/0x348)
  526. [<8035222c>] (driver_probe_device+0x13c/0x348) from [<80350d44>] (bus_for_each_drv+0x48/0x8c)
  527. [<80350d44>] (bus_for_each_drv+0x48/0x8c) from [<80352584>] (device_attach+0x7c/0xa0)
  528. [<80352584>] (device_attach+0x7c/0xa0) from [<80350f18>] (bus_probe_device+0x28/0x98)
  529. [<80350f18>] (bus_probe_device+0x28/0x98) from [<8034f594>] (device_add+0x3f4/0x5a8)
  530. [<8034f594>] (device_add+0x3f4/0x5a8) from [<80353ab4>] (platform_device_add+0x12c/0x19c)
  531. [<80353ab4>] (platform_device_add+0x12c/0x19c) from [<80066724>] (lcdc_tenderloin_device_register+0x7c/0xc8)
  532. [<80066724>] (lcdc_tenderloin_device_register+0x7c/0xc8) from [<8091f600>] (lcdc_tenderloin_panel_init+0xa8/0xd8)
  533. [<8091f600>] (lcdc_tenderloin_panel_init+0xa8/0xd8) from [<80913b1c>] (do_one_initcall+0x90/0x160)
  534. [<80913b1c>] (do_one_initcall+0x90/0x160) from [<80913ce0>] (kernel_init+0xf4/0x1b8)
  535. [<80913ce0>] (kernel_init+0xf4/0x1b8) from [<8000f674>] (kernel_thread_exit+0x0/0x8)
  536. <4>---[ end trace 82e935b76acc3909 ]---
  537. <3>ulpi_read: timeout 48300000
  538. <6>FrameBuffer[0] 1024x768 size=9437184 bytes is registered successfully!
  539. <4>load_565rle_image: Can not open /initlogo.rle
  540. <7>Registered led device: lcd-backlight
  541. <6>mdp4_lcdc_vsync_init: ndx=0
  542. <5>Registering SWP/SWPB emulation handler
  543. <6>clock_late_init: Removing enables held for handed-off clocks
  544. <4>mmc1: queuing unknown CIS tuple 0x01 (3 bytes)
  545. <6>MSM Watchdog Initialized
  546. <4>8058_l5: Failed to create debugfs directory
  547. <4>8058_l5: Failed to create debugfs directory
  548. <4>8058_l5: Failed to create debugfs directory
  549. <6>rtc-pm8xxx rtc-pm8xxx: setting system clock to 2016-10-29 04:53:34 UTC (1477716814)
  550. <6>msm_v4l2: msm_v4l2_init
  551. <6>ALSA device list:
  552. <6>  #0: msm-audio
  553. <4>Warning: unable to open an initial console.
  554. <6>Freeing init memory: 276K
  555. <4>mmc1: queuing unknown CIS tuple 0x1a (5 bytes)
  556. <4>mmc1: queuing unknown CIS tuple 0x1b (8 bytes)
  557. <4>mmc1: queuing unknown CIS tuple 0x14 (0 bytes)
  558. <4>mmc1: queuing unknown CIS tuple 0x80 (1 bytes)
  559. <4>mmc1: queuing unknown CIS tuple 0x81 (1 bytes)
  560. <4>mmc1: queuing unknown CIS tuple 0x82 (1 bytes)
  561. <6>mmc1: new high speed SDIO card at address 0001
  562. <3>ulpi_read_with_reset: ulpi read failed for 5 times
  563. <7>SELinux: 2048 avtab hash slots, 4656 rules.
  564. <7>SELinux: 2048 avtab hash slots, 4656 rules.
  565. <7>SELinux:  1 users, 2 roles, 380 types, 0 bools, 1 sens, 1024 cats
  566. <7>SELinux:  86 classes, 4656 rules
  567. <7>SELinux:  Completing initialization.
  568. <7>SELinux:  Setting up existing superblocks.
  569. <7>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
  570. <7>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
  571. <7>SELinux: initialized (dev bdev, type bdev), not configured for labeling
  572. <7>SELinux: initialized (dev proc, type proc), uses genfs_contexts
  573. <7>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
  574. <7>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
  575. <7>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
  576. <7>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
  577. <7>SELinux: initialized (dev anon_inodefs, type anon_inodefs), not configured for labeling
  578. <7>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
  579. <7>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
  580. <7>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
  581. <7>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
  582. <5>type=1403 audit(1477716814.710:2): policy loaded auid=4294967295 ses=4294967295
  583. <3>init: could not import file 'init.power.rc' from '/init.evervolv.rc'
  584. <3>init: Warning!  Service serial needs a SELinux domain defined; please fix!
  585. <3>init: invalid uid 'fm_radio'
  586. <3>init: invalid uid 'felicaclient'
  587. <3>init: invalid uid 'felicaclient'
  588. <3>init: invalid uid 'felicalock'
  589. <3>init: invalid uid 'felicaclient'
  590. <3>init: invalid uid 'felicaclient'
  591. <3>init: invalid uid 'felicaclient'
  592. <3>init: invalid uid 'felicaclient'
  593. <3>init: invalid uid 'felicaclient'
  594. <3>init: invalid uid 'autobot_access'
  595. <6>android_work: android_work: did not send uevent (0 0   (null))
  596. <3>init: /dev/hw_random not found
  597. <7>SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
  598. <7>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
  599. <7>SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
  600. <7>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
  601. <7>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
  602. <7>SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
  603. <6>kjournald starting.  Commit interval 5 seconds
  604. <6>EXT3-fs (mmcblk0p13): using internal journal
  605. <6>EXT3-fs (mmcblk0p13): mounted filesystem with writeback data mode
  606. <7>SELinux: initialized (dev mmcblk0p13, type ext3), uses xattr
  607. <5>type=1400 audit(1477716815.710:3): avc:  denied  { execute } for  pid=108 comm="init" name="busybox" dev="mmcblk0p13" ino=47 scontext=u:r:init:s0 tcontext=u:object_r:unlabeled:s0 tclass=file permissive=1
  608. <5>type=1400 audit(1477716815.710:4): avc:  denied  { execute_no_trans } for  pid=108 comm="init" path="/boot/bin/busybox" dev="mmcblk0p13" ino=47 scontext=u:r:init:s0 tcontext=u:object_r:unlabeled:s0 tclass=file permissive=1
  609. <5>type=1400 audit(1477716816.020:5): avc:  denied  { create } for  pid=109 comm="lvm.static" name=".lvm_(none)_109_2100306852" scontext=u:r:init:s0 tcontext=u:object_r:rootfs:s0 tclass=file permissive=1
  610. <5>type=1400 audit(1477716816.020:6): avc:  denied  { append } for  pid=109 comm="lvm.static" name=".lvm_(none)_109_2100306852" dev="rootfs" ino=4445 scontext=u:r:init:s0 tcontext=u:object_r:rootfs:s0 tclass=file permissive=1
  611. <5>type=1400 audit(1477716816.020:7): avc:  denied  { link } for  pid=109 comm="lvm.static" name=".lvm_(none)_109_2100306852" dev="rootfs" ino=4445 scontext=u:r:init:s0 tcontext=u:object_r:rootfs:s0 tclass=file permissive=1
  612. <5>type=1400 audit(1477716816.020:8): avc:  denied  { unlink } for  pid=109 comm="lvm.static" name=".lvm_(none)_109_2100306852" dev="rootfs" ino=4445 scontext=u:r:init:s0 tcontext=u:object_r:rootfs:s0 tclass=file permissive=1
  613. <5>type=1400 audit(1477716816.030:9): avc:  denied  { rename } for  pid=109 comm="lvm.static" name=".lvm_(none)_109_1580261114" dev="rootfs" ino=4449 scontext=u:r:init:s0 tcontext=u:object_r:rootfs:s0 tclass=file permissive=1
  614. <5>type=1400 audit(1477716816.070:10): avc:  denied  { create } for  pid=109 comm="lvm.static" name="store-media" scontext=u:r:init:s0 tcontext=u:object_r:device:s0 tclass=blk_file permissive=1
  615. <5>type=1400 audit(1477716816.070:11): avc:  denied  { setattr } for  pid=109 comm="lvm.static" name="store-media" dev="tmpfs" ino=4460 scontext=u:r:init:s0 tcontext=u:object_r:device:s0 tclass=blk_file permissive=1
  616. <5>type=1400 audit(1477716816.441:12): avc:  denied  { write } for  pid=109 comm="lvm.static" name=".cache" dev="rootfs" ino=4561 scontext=u:r:init:s0 tcontext=u:object_r:rootfs:s0 tclass=file permissive=1
  617. <3>init: /dev/hw_random not found
  618. <6>EXT4-fs (dm-9): barriers disabled
  619. <6>EXT4-fs (dm-9): mounted filesystem with ordered data mode. Opts: barrier=0
  620. <7>SELinux: initialized (dev dm-9, type ext4), uses xattr
  621. <6>fs_mgr: __mount(source=/dev/store/cm-system,target=/system,type=ext4)=0
  622. <6>F2FS-fs (dm-8): Magic Mismatch, valid(0xf2f52010) - read(0x120000)
  623. <3>F2FS-fs (dm-8): Can't find valid F2FS filesystem in 1th superblock
  624. <6>F2FS-fs (dm-8): Magic Mismatch, valid(0xf2f52010) - read(0x100000)
  625. <3>F2FS-fs (dm-8): Can't find valid F2FS filesystem in 2th superblock
  626. <6>F2FS-fs (dm-8): Magic Mismatch, valid(0xf2f52010) - read(0x120000)
  627. <3>F2FS-fs (dm-8): Can't find valid F2FS filesystem in 1th superblock
  628. <6>F2FS-fs (dm-8): Magic Mismatch, valid(0xf2f52010) - read(0x100000)
  629. <3>F2FS-fs (dm-8): Can't find valid F2FS filesystem in 2th superblock
  630. <6>fs_mgr: __mount(source=/dev/store/cm-data,target=/data,type=f2fs)=-1
  631. <6>EXT4-fs (dm-8): barriers disabled
  632. <6>wm8994-codec wm8994-codec: MBC timestamp 4d6e4685
  633. <6>wm8994-codec wm8994-codec: MBC: ODM to BLOB v0.0.0 (odm2blo.pl:52679)
  634. Copyright (c) Wolfson Microelectronics plc. 2011
  635. Wed  2 Mar 2011 13:30:45
  636. mbc_odl.odm
  637. mbc_odl_vcp.txt
  638.  
  639. <6>wm8994-codec wm8994-codec: MBC: got firmware
  640. <6>wm8994-codec wm8994-codec: MBC+VSS timestamp 4d6e6714
  641. <6>wm8994-codec wm8994-codec: MBC+VSS: ODM to BLOB v0.0.0 (odm2blo.pl:52679)
  642. Copyright (c) Wolfson Microelectronics plc. 2011
  643. Wed  2 Mar 2011 15:49:40
  644. DSPPALM.odm
  645. DSPPALM_vcp.txt
  646.  
  647. <6>wm8994-codec wm8994-codec: MBC+VSS: got firmware
  648. <6>wm8994-codec wm8994-codec: ENH_EQ timestamp 4d6e489e
  649. <6>wm8994-codec wm8994-codec: ENH_EQ: ODM to BLOB v0.0.0 (odm2blo.pl:52679)
  650. Copyright (c) Wolfson Microelectronics plc. 2011
  651. Wed  2 Mar 2011 13:39:42
  652. HP_Beats.odm
  653. HP_Beats_vcp.txt
  654.  
  655. <6>wm8994-codec wm8994-codec: ENH_EQ: got firmware
  656. <3>ath6kl: temporary war to avoid sdio crc error
  657. <6>ath6kl: ar6003 hw 2.1.1 sdio fw 3.2.0.144 api 3
  658. <4>EXT4-fs (dm-8): warning: maximal mount count reached, running e2fsck is recommended
  659. <6>EXT4-fs (dm-8): recovery complete
  660. <6>EXT4-fs (dm-8): mounted filesystem with ordered data mode. Opts: barrier=0,noauto_da_alloc
  661. <7>SELinux: initialized (dev dm-8, type ext4), uses xattr
  662. <6>fs_mgr: __mount(source=/dev/store/cm-data,target=/data,type=ext4)=0
  663. <3>fs_mgr: mount_with_alternatives(): Mounted /dev/store/cm-data on /data with fs_type=ext4 instead of f2fs
  664. <6>F2FS-fs (dm-10): Magic Mismatch, valid(0xf2f52010) - read(0x4c20)
  665. <3>F2FS-fs (dm-10): Can't find valid F2FS filesystem in 1th superblock
  666. <6>F2FS-fs (dm-10): Magic Mismatch, valid(0xf2f52010) - read(0x0)
  667. <3>F2FS-fs (dm-10): Can't find valid F2FS filesystem in 2th superblock
  668. <6>F2FS-fs (dm-10): Magic Mismatch, valid(0xf2f52010) - read(0x4c20)
  669. <3>F2FS-fs (dm-10): Can't find valid F2FS filesystem in 1th superblock
  670. <6>F2FS-fs (dm-10): Magic Mismatch, valid(0xf2f52010) - read(0x0)
  671. <3>F2FS-fs (dm-10): Can't find valid F2FS filesystem in 2th superblock
  672. <6>fs_mgr: __mount(source=/dev/store/cm-cache,target=/cache,type=f2fs)=-1
  673. <6>EXT4-fs (dm-10): barriers disabled
  674. <6>EXT4-fs (dm-10): recovery complete
  675. <6>EXT4-fs (dm-10): mounted filesystem with ordered data mode. Opts: barrier=0,noauto_da_alloc
  676. <7>SELinux: initialized (dev dm-10, type ext4), uses xattr
  677. <6>fs_mgr: __mount(source=/dev/store/cm-cache,target=/cache,type=ext4)=0
  678. <3>fs_mgr: mount_with_alternatives(): Mounted /dev/store/cm-cache on /cache with fs_type=ext4 instead of f2fs
  679. <7>SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
  680. <3>init: Warning!  Service welcome_motd needs a SELinux domain defined; please fix!
  681. <3>init: Warning!  Service tsdriver needs a SELinux domain defined; please fix!
  682. <6>binder: 145:145 transaction failed 29189, size 0-0
  683. <6>subsys-restart: restart_level_set(): Phase 3 behavior activated.
  684. <3>init: service 'console' requires console
  685. <3>init: cannot find '/system/bin/debuggerd64', disabling 'debuggerd64'
  686. <3>init: cannot find '/system/bin/rild', disabling 'ril-daemon'
  687. <3>enable_store: android_usb: already disabled
  688. <6>adb_open
  689. <6>mtp_bind_config
  690. <6>input: HPTouchpad as /devices/virtual/input/input6
  691. <38>logd.auditd: start
  692. avc:  denied  { set } for property=a2sd.mountpoint scontext=u:r:sysinit:s0 tcontext=u:object_r:default_prop:s0 tclass=property_service
  693. <38>type=1400 audit(1477716820.374:13): avc: denied { getattr } for pid=194 comm="10check_media_m" path="/dev/mapper/store-media" dev="tmpfs" ino=4460 scontext=u:r:sysinit:s0 tcontext=u:object_r:device:s0 tclass=blk_file permissive=1
  694. <38>type=1400 audit(1477716820.745:14): avc: denied { read write } for pid=150 comm="surfaceflinger" name="kgsl-3d0" dev="tmpfs" ino=4431 scontext=u:r:surfaceflinger:s0 tcontext=u:object_r:device:s0 tclass=chr_file permissive=1
  695. <38>type=1400 audit(1477716820.745:15): avc: denied { open } for pid=150 comm="surfaceflinger" name="kgsl-3d0" dev="tmpfs" ino=4431 scontext=u:r:surfaceflinger:s0 tcontext=u:object_r:device:s0 tclass=chr_file permissive=1
  696. <38>type=1400 audit(1477716820.805:16): avc: denied { ioctl } for pid=150 comm="surfaceflinger" path="/dev/kgsl-3d0" dev="tmpfs" ino=4431 scontext=u:r:surfaceflinger:s0 tcontext=u:object_r:device:s0 tclass=chr_file permissive=1
  697. <3>healthd: wakealarm_init: timerfd_create failed
  698. <4>healthd: battery l=67 v=3801 t=31.0 h=2 st=3 c=171 chg=u
  699. UDC-CHG (2-2-1-1): usb_multi_chg_detect (584) : OMTP Phone Adaptor(900mA)!
  700. usb_chg_detect: temp = 2
  701. <6>a6_update_connected_ps: ac=1 usb=0 dock=0
  702. <6>max8903b_current_setup: CURRENT_750(4), 900(5), 1000(6), 1400(7), 2000MA(9): 5
  703. <4>healthd: battery l=67 v=3801 t=31.0 h=2 st=2 c=171 chg=a
  704. <4>healthd: battery l=67 v=3801 t=31.0 h=2 st=2 c=171 chg=a
  705. <3>[DISP] lcdc_common_panel_power: ++ 1
  706. <4>8058_l10: Failed to create debugfs directory
  707. <6>msm_otg_suspend: usb in low power mode
  708. <4>mdp4_csc_config: Block type 10 isn't supported by CSC.
  709. <4>mdp4_csc_config: Block type 8 isn't supported by CSC.
  710. <3>[DISP] lcdc_tenderloin_panel_set_backlight: 65
  711. <38>type=1400 audit(1477716821.766:17): avc: denied { read write } for pid=279 comm="BootAnimation" name="kgsl-3d0" dev="tmpfs" ino=4431 scontext=u:r:bootanim:s0 tcontext=u:object_r:device:s0 tclass=chr_file permissive=1
  712. <38>type=1400 audit(1477716821.766:18): avc: denied { open } for pid=279 comm="BootAnimation" name="kgsl-3d0" dev="tmpfs" ino=4431 scontext=u:r:bootanim:s0 tcontext=u:object_r:device:s0 tclass=chr_file permissive=1
  713. <38>type=1400 audit(1477716821.766:19): avc: denied { ioctl } for pid=279 comm="BootAnimation" path="/dev/kgsl-3d0" dev="tmpfs" ino=4431 scontext=u:r:bootanim:s0 tcontext=u:object_r:device:s0 tclass=chr_file permissive=1
  714. <6>mdp4_overlay_mdp_perf_upd mdp clk is changed [1] from 0 to 200000000
  715. <7>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
  716. <38>type=1400 audit(1477716826.320:20): avc: denied { read write } for pid=157 comm="mediaserver" name="control0" dev="tmpfs" ino=4322 scontext=u:r:mediaserver:s0 tcontext=u:object_r:device:s0 tclass=chr_file permissive=1
  717. <38>type=1400 audit(1477716826.320:21): avc: denied { open } for pid=157 comm="mediaserver" name="control0" dev="tmpfs" ino=4322 scontext=u:r:mediaserver:s0 tcontext=u:object_r:device:s0 tclass=chr_file permissive=1
  718. <38>type=1400 audit(1477716826.320:22): avc: denied { ioctl } for pid=157 comm="mediaserver" path="/dev/msm_camera/control0" dev="tmpfs" ino=4322 scontext=u:r:mediaserver:s0 tcontext=u:object_r:device:s0 tclass=chr_file permissive=1
  719. <6>msm_release_control: control0
  720. <6>__msm_release, open count =0
  721. <6>__msm_release, vfe_release
  722. <6>__msm_release: draining queue pict
  723. <6>__msm_release: draining queue event
  724. <6>__msm_release: completed
  725. <6>msm_release_control: draining queue control
  726. <6>msm_release_control, completed
  727. <6>warning: `main' uses 32-bit capabilities (legacy support in use)
  728. <38>type=1400 audit(1477716828.592:23): avc: denied { write } for pid=448 comm="system_server" name="tsdriver" dev="tmpfs" ino=3435 scontext=u:r:system_server:s0 tcontext=u:object_r:socket_device:s0 tclass=sock_file permissive=1
  729. <6>request_suspend_state: wakeup (3->0) at 15217348982 (2016-10-29 04:53:48.603311274 UTC)
  730. <6>lsm303dlh_acc_sysfs: hw init start
  731. <6>lsm303dlh_acc_sysfs: hw init done
  732. <38>type=1400 audit(1477716838.812:24): avc: denied { read write } for pid=448 comm="system_server" name="lm8502" dev="tmpfs" ino=4264 scontext=u:r:system_server:s0 tcontext=u:object_r:device:s0 tclass=chr_file permissive=1
  733. <38>type=1400 audit(1477716838.812:25): avc: denied { open } for pid=448 comm="system_server" name="lm8502" dev="tmpfs" ino=4264 scontext=u:r:system_server:s0 tcontext=u:object_r:device:s0 tclass=chr_file permissive=1
  734. <38>type=1400 audit(1477716838.812:26): avc: denied { getattr } for pid=448 comm="system_server" path="/dev/lm8502" dev="tmpfs" ino=4264 scontext=u:r:system_server:s0 tcontext=u:object_r:device:s0 tclass=chr_file permissive=1
  735. <38>type=1400 audit(1477716838.812:27): avc: denied { ioctl } for pid=448 comm="system_server" path="/dev/lm8502" dev="tmpfs" ino=4264 scontext=u:r:system_server:s0 tcontext=u:object_r:device:s0 tclass=chr_file permissive=1
  736. <4>healthd: battery l=67 v=3811 t=31.0 h=2 st=3 c=123 chg=a
  737. lowmem_shrink: convert oom_adj to oom_score_adj:
  738. oom_adj 0 => oom_score_adj 0
  739. oom_adj 1 => oom_score_adj 58
  740. oom_adj 2 => oom_score_adj 117
  741. oom_adj 3 => oom_score_adj 176
  742. oom_adj 9 => oom_score_adj 529
  743. oom_adj 15 => oom_score_adj 1000
  744. <6>acc_open
  745. <6>acc_release
  746. <3>[DISP] lcdc_tenderloin_panel_set_backlight: 104
  747. <6>msm_vidc_venc: Inside vid_enc_open()<6>
  748.  msm_vidc_enc: Inside vid_enc_open_client()<4>
  749. res_trk_download_firmware(): Request firmware download
  750. <4>
  751. VIDC: vidc_freq = 200000000, req_perf_lvl = 244800, set_perf_lvl = 244800
  752. <6>fw_version 2:28:2013<6>
  753.  msm_vidc_enc: Inside vid_enc_release()vidc_cleanup_addr_table(): buffer = OUTPUT
  754. vidc_cleanup_addr_table(): buffer = INPUT
  755. <6>
  756.  msm_vidc_enc: Inside vid_enc_close_client()<38>type=1400 audit(1477716843.217:28): avc: denied { ioctl } for pid=279 comm="BootAnimation" path="/dev/kgsl-3d0" dev="tmpfs" ino=4431 scontext=u:r:bootanim:s0 tcontext=u:object_r:device:s0 tclass=chr_file permissive=1
  757. <6>
  758.  msm_vidc_enc: Return from vid_enc_release()<6>msm_vidc_venc: Inside vid_enc_open()<6>
  759.  msm_vidc_enc: Inside vid_enc_open_client()<4>
  760. VIDC: vidc_freq = 200000000, req_perf_lvl = 244800, set_perf_lvl = 244800
  761. <6>fw_version 2:28:2013<6>
  762.  msm_vidc_enc: Inside vid_enc_release()vidc_cleanup_addr_table(): buffer = OUTPUT
  763. vidc_cleanup_addr_table(): buffer = INPUT
  764. <6>
  765.  msm_vidc_enc: Inside vid_enc_close_client()<6>
  766.  msm_vidc_enc: Return from vid_enc_release()<6>msm_vidc_venc: Inside vid_enc_open()<6>
  767.  msm_vidc_enc: Inside vid_enc_open_client()<4>
  768. VIDC: vidc_freq = 200000000, req_perf_lvl = 244800, set_perf_lvl = 244800
  769. <6>fw_version 2:28:2013<6>
  770.  msm_vidc_enc: Inside vid_enc_release()vidc_cleanup_addr_table(): buffer = OUTPUT
  771. vidc_cleanup_addr_table(): buffer = INPUT
  772. <6>
  773.  msm_vidc_enc: Inside vid_enc_close_client()<6>
  774.  msm_vidc_enc: Return from vid_enc_release()<6>ADDRCONF(NETDEV_UP): wlan0: link is not ready
  775. <6>msm_vidc_dec: Inside vid_dec_open()<4>
  776. VIDC: vidc_freq = 200000000, req_perf_lvl = 244800, set_perf_lvl = 244800
  777. <6>fw_version 2:28:2013<6>msm_vidc_dec: Inside vid_dec_release()vidc_cleanup_addr_table(): buffer = OUTPUT
  778. vidc_cleanup_addr_table(): buffer = INPUT
  779. <6>msm_vidc_dec: Return from vid_dec_release()<6>msm_vidc_dec: Inside vid_dec_open()<4>
  780. VIDC: vidc_freq = 200000000, req_perf_lvl = 244800, set_perf_lvl = 244800
  781. <6>fw_version 2:28:2013<6>msm_vidc_dec: Inside vid_dec_release()vidc_cleanup_addr_table(): buffer = OUTPUT
  782. vidc_cleanup_addr_table(): buffer = INPUT
  783. <6>msm_vidc_dec: Return from vid_dec_release()<6>msm_vidc_dec: Inside vid_dec_open()<4>
  784. VIDC: vidc_freq = 200000000, req_perf_lvl = 244800, set_perf_lvl = 244800
  785. <6>fw_version 2:28:2013<6>msm_vidc_dec: Inside vid_dec_release()vidc_cleanup_addr_table(): buffer = OUTPUT
  786. vidc_cleanup_addr_table(): buffer = INPUT
  787. <38>type=1400 audit(1477716843.637:29): avc: denied { ioctl } for pid=150 comm="surfaceflinger" path="/dev/kgsl-3d0" dev="tmpfs" ino=4431 scontext=u:r:surfaceflinger:s0 tcontext=u:object_r:device:s0 tclass=chr_file permissive=1
  788. <6>msm_vidc_dec: Return from vid_dec_release()<6>msm_vidc_dec: Inside vid_dec_open()<4>
  789. VIDC: vidc_freq = 200000000, req_perf_lvl = 244800, set_perf_lvl = 244800
  790. <6>fw_version 2:28:2013<6>msm_vidc_dec: Inside vid_dec_release()vidc_cleanup_addr_table(): buffer = OUTPUT
  791. vidc_cleanup_addr_table(): buffer = INPUT
  792. <6>msm_vidc_dec: Return from vid_dec_release()<6>msm_vidc_dec: Inside vid_dec_open()<4>
  793. VIDC: vidc_freq = 200000000, req_perf_lvl = 244800, set_perf_lvl = 244800
  794. <6>fw_version 2:28:2013<6>msm_vidc_dec: Inside vid_dec_release()vidc_cleanup_addr_table(): buffer = OUTPUT
  795. vidc_cleanup_addr_table(): buffer = INPUT
  796. <6>msm_vidc_dec: Return from vid_dec_release()<6>msm_vidc_dec: Inside vid_dec_open()<4>
  797. VIDC: vidc_freq = 200000000, req_perf_lvl = 244800, set_perf_lvl = 244800
  798. <6>fw_version 2:28:2013<6>msm_vidc_dec: Inside vid_dec_release()vidc_cleanup_addr_table(): buffer = OUTPUT
  799. vidc_cleanup_addr_table(): buffer = INPUT
  800. <6>msm_vidc_dec: Return from vid_dec_release()<6>msm_vidc_dec: Inside vid_dec_open()<38>type=1400 audit(1477716843.807:30): avc: denied { read write } for pid=590 comm="NPDecoder" name="msm_vidc_dec" dev="tmpfs" ino=4352 scontext=u:r:mediaserver:s0 tcontext=u:object_r:device:s0 tclass=chr_file permissive=1
  801. <38>type=1400 audit(1477716843.807:31): avc: denied { open } for pid=590 comm="NPDecoder" name="msm_vidc_dec" dev="tmpfs" ino=4352 scontext=u:r:mediaserver:s0 tcontext=u:object_r:device:s0 tclass=chr_file permissive=1
  802. <4>
  803. VIDC: vidc_freq = 200000000, req_perf_lvl = 244800, set_perf_lvl = 244800
  804. <6>fw_version 2:28:2013<38>type=1400 audit(1477716843.837:32): avc: denied { ioctl } for pid=590 comm="NPDecoder" path="/dev/msm_vidc_dec" dev="tmpfs" ino=4352 scontext=u:r:mediaserver:s0 tcontext=u:object_r:device:s0 tclass=chr_file permissive=1
  805. <6>msm_vidc_dec: Inside vid_dec_release()vidc_cleanup_addr_table(): buffer = OUTPUT
  806. vidc_cleanup_addr_table(): buffer = INPUT
  807. <6>msm_vidc_dec: Return from vid_dec_release()<6>msm_vidc_dec: Inside vid_dec_open()<4>
  808. VIDC: vidc_freq = 200000000, req_perf_lvl = 244800, set_perf_lvl = 244800
  809. <6>fw_version 2:28:2013<6>msm_vidc_dec: Inside vid_dec_release()vidc_cleanup_addr_table(): buffer = OUTPUT
  810. vidc_cleanup_addr_table(): buffer = INPUT
  811. <6>msm_vidc_dec: Return from vid_dec_release()<6>msm_release_control: control0
  812. <6>__msm_release, open count =0
  813. <6>__msm_release, vfe_release
  814. <6>__msm_release: draining queue pict
  815. <6>__msm_release: draining queue event
  816. <6>__msm_release: completed
  817. <6>msm_release_control: draining queue control
  818. <6>msm_release_control, completed
  819. <4>fs_vfe: Failed to create debugfs directory
  820. +++ config_camera_on_gpios_web_cam_mt9m113
  821. <4>8058_lvs0: Failed to create debugfs directory
  822. config_camera_on_gpios_web_cam_mt9m113:enable the regulator votg_lvs0 succeed
  823. <4>8058_l11: Failed to create debugfs directory
  824. config_camera_on_gpios_web_cam_mt9m113:enable the regulator votg_vreg_l11 succeed
  825. --- config_camera_on_gpios_web_cam_mt9m113
  826. <6>msm_camio_set_perf_lvl: S_INIT rc = 2631455872
  827. <6>msm_camio_set_perf_lvl: S_PREVIEW rc = 0
  828. <4>fs_vpe: Failed to create debugfs directory
  829. <6>msm_enqueue: queue event new max is 1
  830. <6>msm_enqueue: queue control new max is 1
  831. <6>get_pic:MSM_CAM_IOCTL_ABORT_CAPTURE
  832. <6>vfe31_proc_general: cmdID = STOP
  833. <3>msm_empty_frame_q: NULL value for g_pmsm
  834. <6>msm_release_config: config0
  835. <6>__msm_release, open count =1
  836. <6>msm_release_config: draining queue event
  837. <6>msm_release_config, completed
  838. <6>msm_release_control: control0
  839. <6>msm_release_control, stop vfe if active
  840. <6>__msm_release, open count =0
  841. <6>__msm_release, vfe_release
  842. <6>vfe31_release, free_irq
  843. <6>msm_vpe_release: In
  844. <6>msm_vpe_release: Out
  845. <6>vfe31_release, msm_camio_disable
  846. <6>msm_camio_set_perf_lvl: S_EXIT
  847. <6>__msm_release, s_release
  848. <6>__msm_release, msm_camio_sensor_clk_off
  849. +++ config_camera_off_gpios_web_cam_mt9m113
  850. config_camera_off_gpios_web_cam_mt9m113:disable the regulator: votg_lvs0 succeed
  851. config_camera_off_gpios_web_cam_mt9m113:disable the regulator: votg_vreg_l11 succeed
  852. --- config_camera_off_gpios_web_cam_mt9m113
  853. <6>__msm_release: draining queue pict
  854. <6>__msm_release: draining queue event
  855. <6>__msm_release: completed
  856. <6>msm_release_control: draining queue control
  857. <6>msm_release_control, completed
  858. <38>type=1400 audit(1477716856.089:33): avc: denied { read write } for pid=1096 comm="RenderThread" name="kgsl-3d0" dev="tmpfs" ino=4431 scontext=u:r:platform_app:s0 tcontext=u:object_r:device:s0 tclass=chr_file permissive=1
  859. <38>type=1400 audit(1477716856.089:34): avc: denied { open } for pid=1096 comm="RenderThread" name="kgsl-3d0" dev="tmpfs" ino=4431 scontext=u:r:platform_app:s0 tcontext=u:object_r:device:s0 tclass=chr_file permissive=1
  860. <38>type=1400 audit(1477716856.089:35): avc: denied { ioctl } for pid=1096 comm="RenderThread" path="/dev/kgsl-3d0" dev="tmpfs" ino=4431 scontext=u:r:platform_app:s0 tcontext=u:object_r:device:s0 tclass=chr_file permissive=1
  861. <7>SELinux: initialized (dev dm-6, type vfat), uses genfs_contexts
  862. <7>SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
  863. <38>type=1400 audit(1477716858.401:36): avc: denied { read write } for pid=1150 comm="RenderThread" name="kgsl-3d0" dev="tmpfs" ino=4431 scontext=u:r:untrusted_app:s0 tcontext=u:object_r:device:s0 tclass=chr_file permissive=1
  864. <38>type=1400 audit(1477716858.401:37): avc: denied { open } for pid=1150 comm="RenderThread" name="kgsl-3d0" dev="tmpfs" ino=4431 scontext=u:r:untrusted_app:s0 tcontext=u:object_r:device:s0 tclass=chr_file permissive=1
  865. <38>type=1400 audit(1477716858.401:38): avc: denied { ioctl } for pid=1150 comm="RenderThread" path="/dev/kgsl-3d0" dev="tmpfs" ino=4431 scontext=u:r:untrusted_app:s0 tcontext=u:object_r:device:s0 tclass=chr_file permissive=1
  866. <6>lsm303dlh_acc_sysfs: hw init start
  867. <6>lsm303dlh_acc_sysfs: hw init done
  868. <6>binder: undelivered transaction 16621
  869. <3>msm_wm8958_setup_power: codec power setup
  870. <4>8058_s3: Failed to create debugfs directory
  871. <3>wm8994_ldo_power: Power up the WM8994 LDOs
  872. <6>pil pil0: q6: Brought out of reset
  873. <6>apr_tal:Q6 Is Up
  874. <6>apr_tal: SMD_EVENT_OPEN
  875. <6>msm_device_put:device speaker_stereo_rx set 0
  876. <6>msm_device_put:device speaker_stereo_rx set 1
  877. <3>msm_device_put:device freq =48000
  878. <3>Device active
  879. <38>type=1400 audit(1477716863.977:39): avc: denied { write } for pid=1493 comm="vervolv.toolbox" name="run" dev="sysfs" ino=5316 scontext=u:r:system_app:s0 tcontext=u:object_r:sysfs_writable:s0 tclass=file permissive=1
  880. <38>type=1400 audit(1477716863.977:40): avc: denied { open } for pid=1493 comm="vervolv.toolbox" name="run" dev="sysfs" ino=5316 scontext=u:r:system_app:s0 tcontext=u:object_r:sysfs_writable:s0 tclass=file permissive=1
  881. <38>type=1400 audit(1477716863.977:41): avc: denied { getattr } for pid=1493 comm="vervolv.toolbox" path="/sys/kernel/mm/ksm/run" dev="sysfs" ino=5316 scontext=u:r:system_app:s0 tcontext=u:object_r:sysfs_writable:s0 tclass=file permissive=1
  882. <6>ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
  883. <38>type=1400 audit(1477716866.229:42): avc: denied { ioctl } for pid=150 comm="surfaceflinger" path="/dev/kgsl-3d0" dev="tmpfs" ino=4431 scontext=u:r:surfaceflinger:s0 tcontext=u:object_r:device:s0 tclass=chr_file permissive=1
  884. <38>type=1400 audit(1477716866.259:43): avc: denied { read write } for pid=1673 comm="RenderThread" name="kgsl-3d0" dev="tmpfs" ino=4431 scontext=u:r:system_app:s0 tcontext=u:object_r:device:s0 tclass=chr_file permissive=1
  885. <38>type=1400 audit(1477716866.259:44): avc: denied { open } for pid=1673 comm="RenderThread" name="kgsl-3d0" dev="tmpfs" ino=4431 scontext=u:r:system_app:s0 tcontext=u:object_r:device:s0 tclass=chr_file permissive=1
  886. <38>type=1400 audit(1477716866.259:45): avc: denied { ioctl } for pid=1673 comm="RenderThread" path="/dev/kgsl-3d0" dev="tmpfs" ino=4431 scontext=u:r:system_app:s0 tcontext=u:object_r:device:s0 tclass=chr_file permissive=1
  887. <38>type=1400 audit(1477716866.399:46): avc: denied { ioctl } for pid=1096 comm="RenderThread" path="/dev/kgsl-3d0" dev="tmpfs" ino=4431 scontext=u:r:platform_app:s0 tcontext=u:object_r:device:s0 tclass=chr_file permissive=1
  888. <38>type=1400 audit(1477716866.399:47): avc: denied { read write } for pid=1096 comm="RenderThread" path="/dev/kgsl-3d0" dev="tmpfs" ino=4431 scontext=u:r:platform_app:s0 tcontext=u:object_r:device:s0 tclass=chr_file permissive=1
  889. <38>type=1400 audit(1477716866.769:48): avc: denied { ioctl } for pid=1673 comm="RenderThread" path="/dev/kgsl-3d0" dev="tmpfs" ino=4431 scontext=u:r:system_app:s0 tcontext=u:object_r:device:s0 tclass=chr_file permissive=1
  890. <38>type=1400 audit(1477716866.780:49): avc: denied { read write } for pid=1673 comm="RenderThread" path="/dev/kgsl-3d0" dev="tmpfs" ino=4431 scontext=u:r:system_app:s0 tcontext=u:object_r:device:s0 tclass=chr_file permissive=1
  891. <38>type=1400 audit(1477716867.040:50): avc: denied { ioctl } for pid=1150 comm="RenderThread" path="/dev/kgsl-3d0" dev="tmpfs" ino=4431 scontext=u:r:untrusted_app:s0 tcontext=u:object_r:device:s0 tclass=chr_file permissive=1
  892. <6>msm_device_put:device speaker_stereo_rx set 0
  893. <38>type=1400 audit(1477716868.225:51): avc: denied { read write } for pid=1150 comm="RenderThread" path="/dev/kgsl-3d0" dev="tmpfs" ino=4431 scontext=u:r:untrusted_app:s0 tcontext=u:object_r:device:s0 tclass=chr_file permissive=1
  894. <38>type=1400 audit(1477716869.586:52): avc: denied { read write } for pid=150 comm="surfaceflinger" path="/dev/kgsl-3d0" dev="tmpfs" ino=4431 scontext=u:r:surfaceflinger:s0 tcontext=u:object_r:device:s0 tclass=chr_file permissive=1
  895. <6>binder: undelivered transaction 25950
  896. <6>binder: send failed reply for transaction 25973 to 891:1804
  897. <6>a6_update_connected_ps: ac=1 usb=0 dock=0
  898. <7>wlan0: no IPv6 routers present
  899. <38>type=1400 audit(1477716875.522:53): avc: denied { open } for pid=1876 comm="Binder_2" name="kgsl-3d0" dev="tmpfs" ino=4431 scontext=u:r:untrusted_app:s0 tcontext=u:object_r:device:s0 tclass=chr_file permissive=1
  900. <38>type=1400 audit(1477716876.423:54): avc: denied { read } for pid=1876 comm="Binder_2" name="/" dev="tmpfs" ino=3079 scontext=u:r:untrusted_app:s0 tcontext=u:object_r:device:s0 tclass=dir permissive=1
  901. <38>type=1400 audit(1477716876.423:55): avc: denied { open } for pid=1876 comm="Binder_2" name="/" dev="tmpfs" ino=3079 scontext=u:r:untrusted_app:s0 tcontext=u:object_r:device:s0 tclass=dir permissive=1
  902. <38>type=1400 audit(1477717023.396:56): avc: denied { read } for pid=1875 comm="Binder_1" name="/" dev="tmpfs" ino=3079 scontext=u:r:untrusted_app:s0 tcontext=u:object_r:device:s0 tclass=dir permissive=1
  903. <38>type=1400 audit(1477717023.396:57): avc: denied { open } for pid=1875 comm="Binder_1" name="/" dev="tmpfs" ino=3079 scontext=u:r:untrusted_app:s0 tcontext=u:object_r:device:s0 tclass=dir permissive=1
  904. <3>[DISP] lcdc_tenderloin_panel_set_backlight: 101
  905. <3>[DISP] lcdc_tenderloin_panel_set_backlight: 98
  906. <3>[DISP] lcdc_tenderloin_panel_set_backlight: 94
  907. <3>[DISP] lcdc_tenderloin_panel_set_backlight: 91
  908. <3>[DISP] lcdc_tenderloin_panel_set_backlight: 88
  909. <3>[DISP] lcdc_tenderloin_panel_set_backlight: 84
  910. <3>[DISP] lcdc_tenderloin_panel_set_backlight: 81
  911. <3>[DISP] lcdc_tenderloin_panel_set_backlight: 78
  912. <3>[DISP] lcdc_tenderloin_panel_set_backlight: 74
  913. <3>[DISP] lcdc_tenderloin_panel_set_backlight: 71
  914. <3>[DISP] lcdc_tenderloin_panel_set_backlight: 68
  915. <3>[DISP] lcdc_tenderloin_panel_set_backlight: 64
  916. <3>[DISP] lcdc_tenderloin_panel_set_backlight: 61
  917. <3>[DISP] lcdc_tenderloin_panel_set_backlight: 58
  918. <3>[DISP] lcdc_tenderloin_panel_set_backlight: 54
  919. <3>[DISP] lcdc_tenderloin_panel_set_backlight: 51
  920. <3>[DISP] lcdc_tenderloin_panel_set_backlight: 48
  921. <3>[DISP] lcdc_tenderloin_panel_set_backlight: 44
  922. <3>[DISP] lcdc_tenderloin_panel_set_backlight: 41
  923. <3>[DISP] lcdc_tenderloin_panel_set_backlight: 38
  924. <3>[DISP] lcdc_tenderloin_panel_set_backlight: 34
  925. <3>[DISP] lcdc_tenderloin_panel_set_backlight: 31
  926. <3>[DISP] lcdc_tenderloin_panel_set_backlight: 28
  927. <3>[DISP] lcdc_tenderloin_panel_set_backlight: 24
  928. <3>[DISP] lcdc_tenderloin_panel_set_backlight: 21
  929. <3>[DISP] lcdc_tenderloin_panel_set_backlight: 18
  930. <3>[DISP] lcdc_tenderloin_panel_set_backlight: 14
  931. <3>[DISP] lcdc_tenderloin_panel_set_backlight: 12
  932. <3>[DISP] lcdc_tenderloin_panel_set_backlight: 16
  933. <3>[DISP] lcdc_tenderloin_panel_set_backlight: 19
  934. <3>[DISP] lcdc_tenderloin_panel_set_backlight: 22
  935. <3>[DISP] lcdc_tenderloin_panel_set_backlight: 26
  936. <3>[DISP] lcdc_tenderloin_panel_set_backlight: 29
  937. <3>[DISP] lcdc_tenderloin_panel_set_backlight: 32
  938. <3>[DISP] lcdc_tenderloin_panel_set_backlight: 36
  939. <3>[DISP] lcdc_tenderloin_panel_set_backlight: 39
  940. <3>[DISP] lcdc_tenderloin_panel_set_backlight: 43
  941. <3>[DISP] lcdc_tenderloin_panel_set_backlight: 47
  942. <3>[DISP] lcdc_tenderloin_panel_set_backlight: 50
  943. <3>[DISP] lcdc_tenderloin_panel_set_backlight: 53
  944. <3>[DISP] lcdc_tenderloin_panel_set_backlight: 57
  945. <3>[DISP] lcdc_tenderloin_panel_set_backlight: 60
  946. <3>[DISP] lcdc_tenderloin_panel_set_backlight: 63
  947. <3>[DISP] lcdc_tenderloin_panel_set_backlight: 67
  948. <3>[DISP] lcdc_tenderloin_panel_set_backlight: 70
  949. <3>[DISP] lcdc_tenderloin_panel_set_backlight: 73
  950. <3>[DISP] lcdc_tenderloin_panel_set_backlight: 77
  951. <3>[DISP] lcdc_tenderloin_panel_set_backlight: 80
  952. <3>[DISP] lcdc_tenderloin_panel_set_backlight: 84
  953. <3>[DISP] lcdc_tenderloin_panel_set_backlight: 87
  954. <3>[DISP] lcdc_tenderloin_panel_set_backlight: 90
  955. <3>[DISP] lcdc_tenderloin_panel_set_backlight: 94
  956. <3>[DISP] lcdc_tenderloin_panel_set_backlight: 97
  957. <3>[DISP] lcdc_tenderloin_panel_set_backlight: 100
  958. <3>[DISP] lcdc_tenderloin_panel_set_backlight: 104
  959. <6>msm_device_put:device speaker_stereo_rx set 0
  960. <6>msm_device_put:device speaker_stereo_rx set 1
  961. <3>msm_device_put:device freq =48000
  962. <3>Device active
  963. <6>msm_device_put:device speaker_stereo_rx set 0
  964. <6>msm_device_put:device speaker_stereo_rx set 0
  965. <6>msm_device_put:device speaker_stereo_rx set 1
  966. <3>msm_device_put:device freq =48000
  967. <3>Device active
  968. <6>msm_device_put:device speaker_stereo_rx set 0
  969. <6>msm_device_put:device speaker_stereo_rx set 0
  970. <6>msm_device_put:device speaker_stereo_rx set 1
  971. <3>msm_device_put:device freq =48000
  972. <3>Device active
  973. <6>msm_device_put:device speaker_stereo_rx set 0
  974. <6>msm_device_put:device speaker_stereo_rx set 0
  975. <6>msm_device_put:device speaker_stereo_rx set 1
  976. <3>msm_device_put:device freq =48000
  977. <3>Device active
  978. <6>msm_device_put:device speaker_stereo_rx set 0
  979. <6>msm_device_put:device speaker_stereo_rx set 0
  980. <6>msm_device_put:device speaker_stereo_rx set 1
  981. <3>msm_device_put:device freq =48000
  982. <3>Device active
  983. <6>msm_device_put:device speaker_stereo_rx set 0
  984. <3>[DISP] lcdc_tenderloin_panel_set_backlight: 105
  985. <3>[DISP] lcdc_tenderloin_panel_set_backlight: 108
  986. <3>[DISP] lcdc_tenderloin_panel_set_backlight: 112
  987. <3>[DISP] lcdc_tenderloin_panel_set_backlight: 115
  988. <3>[DISP] lcdc_tenderloin_panel_set_backlight: 118
  989. <3>[DISP] lcdc_tenderloin_panel_set_backlight: 115
  990. <3>[DISP] lcdc_tenderloin_panel_set_backlight: 112
  991. <3>[DISP] lcdc_tenderloin_panel_set_backlight: 108
  992. <3>[DISP] lcdc_tenderloin_panel_set_backlight: 105
  993. <3>[DISP] lcdc_tenderloin_panel_set_backlight: 104
  994. <3>[DISP] lcdc_tenderloin_panel_set_backlight: 102
  995. <3>[DISP] lcdc_tenderloin_panel_set_backlight: 99
  996. <3>[DISP] lcdc_tenderloin_panel_set_backlight: 96
  997. <3>[DISP] lcdc_tenderloin_panel_set_backlight: 92
  998. <3>[DISP] lcdc_tenderloin_panel_set_backlight: 89
  999. <3>[DISP] lcdc_tenderloin_panel_set_backlight: 86
  1000. <3>[DISP] lcdc_tenderloin_panel_set_backlight: 82
  1001. <3>[DISP] lcdc_tenderloin_panel_set_backlight: 79
  1002. <3>[DISP] lcdc_tenderloin_panel_set_backlight: 76
  1003. <3>[DISP] lcdc_tenderloin_panel_set_backlight: 72
  1004. <3>[DISP] lcdc_tenderloin_panel_set_backlight: 69
  1005. <3>[DISP] lcdc_tenderloin_panel_set_backlight: 66
  1006. <3>[DISP] lcdc_tenderloin_panel_set_backlight: 62
  1007. <3>[DISP] lcdc_tenderloin_panel_set_backlight: 59
  1008. <3>[DISP] lcdc_tenderloin_panel_set_backlight: 56
  1009. <3>[DISP] lcdc_tenderloin_panel_set_backlight: 52
  1010. <3>[DISP] lcdc_tenderloin_panel_set_backlight: 49
  1011. <3>[DISP] lcdc_tenderloin_panel_set_backlight: 46
  1012. <3>[DISP] lcdc_tenderloin_panel_set_backlight: 42
  1013. <3>[DISP] lcdc_tenderloin_panel_set_backlight: 39
  1014. <3>[DISP] lcdc_tenderloin_panel_set_backlight: 36
  1015. <3>[DISP] lcdc_tenderloin_panel_set_backlight: 32
  1016. <3>[DISP] lcdc_tenderloin_panel_set_backlight: 29
  1017. <3>[DISP] lcdc_tenderloin_panel_set_backlight: 26
  1018. <3>[DISP] lcdc_tenderloin_panel_set_backlight: 24
  1019. <3>[DISP] lcdc_tenderloin_panel_set_backlight: 23
  1020. <4>healthd: battery l=67 v=3806 t=32.0 h=2 st=2 c=222 chg=a
  1021. <7>lm8502_mod_brightness: set LED1 brightness (100) percent
  1022. <7>lm8502_mod_brightness: set LED2 brightness (100) percent
  1023. <38>type=1400 audit(1477717115.656:58): avc: denied { ioctl } for pid=150 comm="surfaceflinger" path="/dev/kgsl-3d0" dev="tmpfs" ino=4431 scontext=u:r:surfaceflinger:s0 tcontext=u:object_r:device:s0 tclass=chr_file permissive=1
  1024. <38>type=1400 audit(1477717129.850:59): avc: denied { ioctl } for pid=473 comm="PowerManagerSer" path="/dev/kgsl-3d0" dev="tmpfs" ino=4431 scontext=u:r:system_server:s0 tcontext=u:object_r:device:s0 tclass=chr_file permissive=1
  1025. <38>type=1400 audit(1477717129.850:60): avc: denied { read write } for pid=473 comm="PowerManagerSer" path="/dev/kgsl-3d0" dev="tmpfs" ino=4431 scontext=u:r:system_server:s0 tcontext=u:object_r:device:s0 tclass=chr_file permissive=1
  1026. <3>[DISP] lcdc_tenderloin_panel_set_backlight: 0
  1027. <3>[DISP] lcdc_common_panel_power: ++ 0
  1028. <38>type=1400 audit(1477717130.581:61): avc: denied { write } for pid=509 comm="Thread-62" name="tsdriver" dev="tmpfs" ino=3435 scontext=u:r:system_server:s0 tcontext=u:object_r:socket_device:s0 tclass=sock_file permissive=1
  1029. <6>request_suspend_state: sleep (0->3) at 317134000631 (2016-10-29 04:58:50.590577430 UTC)
  1030. <6>binder: undelivered transaction 148745
  1031. <6>PM: suspend entry 2016-10-29 04:58:51.301850625 UTC
  1032. Freezing user space processes ... (elapsed 0.032 seconds) done.
  1033. Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
  1034. Suspending console(s) (use no_console_suspend to debug)
  1035. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  1036. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  1037. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  1038. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  1039. <3>msm_wm8958_shutdown_power: codec power shutdown
  1040. <3>wm8994_ldo_power: Power down the WM8994 LDOs
  1041. max8903b_suspend: suspend
  1042. <6>PM: suspend of devices complete after 273.223 msecs
  1043. <6>PM: late suspend of devices complete after 2.075 msecs
  1044. <6>PM: noirq suspend of devices complete after 2.655 msecs
  1045. Disabling non-boot CPUs ...
  1046. <6>msm_pm_enter
  1047. <6>msm_pm_enter: power collapse
  1048. <6>msm_mpm_irqs_detectable: cannot monitor 0000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000<6>msm_pm_enter: return
  1049. <6>Enabling non-boot CPUs ...
  1050. <6>CPU1 is up
  1051. <6>PM: noirq resume of devices complete after 2.136 msecs
  1052. <6>wakeup wake lock: mmc1
  1053. <6>PM: early resume of devices complete after 2.044 msecs
  1054. max8903b_resume: resume
  1055. <3>msm_wm8958_setup_power: codec power setup
  1056. <4>8058_s3: Failed to create debugfs directory
  1057. <3>wm8994_ldo_power: Power up the WM8994 LDOs
  1058. <7>lm8502_mod_brightness: set LED1 brightness (100) percent
  1059. <7>lm8502_mod_brightness: set LED2 brightness (100) percent
  1060. <7>lm8502_mod_brightness: set LED1 brightness (100) percent
  1061. <7>lm8502_mod_brightness: set LED2 brightness (100) percent
  1062. <6>PM: resume of devices complete after 103.892 msecs
  1063. Restarting tasks ... done.
  1064. <6>PM: suspend exit 2016-10-29 04:58:52.071836952 UTC
  1065. <6>suspend: exit suspend, ret = 0 (2016-10-29 04:58:52.071867451 UTC)
  1066. <6>active wake lock mmc1_detect
  1067. <6>active wake lock mmc0_detect
  1068. <6>active wake lock power-supply
  1069. <4>healthd: battery l=67 v=3840 t=32.0 h=2 st=2 c=106 chg=a
  1070. <6>PM: suspend entry 2016-10-29 04:58:52.123894069 UTC
  1071. Freezing user space processes ... (elapsed 0.009 seconds) done.
  1072. Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
  1073. Suspending console(s) (use no_console_suspend to debug)
  1074. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  1075. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  1076. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  1077. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  1078. <3>msm_wm8958_shutdown_power: codec power shutdown
  1079. <3>wm8994_ldo_power: Power down the WM8994 LDOs
  1080. max8903b_suspend: suspend
  1081. <6>PM: suspend of devices complete after 274.676 msecs
  1082. <6>PM: late suspend of devices complete after 5.949 msecs
  1083. <6>PM: noirq suspend of devices complete after 7.200 msecs
  1084. Disabling non-boot CPUs ...
  1085. <6>msm_pm_enter
  1086. <6>msm_pm_enter: power collapse
  1087. <6>msm_mpm_irqs_detectable: cannot monitor 0000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000<6>msm_pm_enter: return
  1088. <6>Enabling non-boot CPUs ...
  1089. <6>CPU1 is up
  1090. <6>PM: noirq resume of devices complete after 6.071 msecs
  1091. <6>wakeup wake lock: alarm_rtc
  1092. <6>PM: early resume of devices complete after 5.705 msecs
  1093. max8903b_resume: resume
  1094. <3>msm_wm8958_setup_power: codec power setup
  1095. <4>8058_s3: Failed to create debugfs directory
  1096. <3>wm8994_ldo_power: Power up the WM8994 LDOs
  1097. <7>lm8502_mod_brightness: set LED1 brightness (100) percent
  1098. <7>lm8502_mod_brightness: set LED2 brightness (100) percent
  1099. <7>lm8502_mod_brightness: set LED1 brightness (100) percent
  1100. <7>lm8502_mod_brightness: set LED2 brightness (100) percent
  1101. <6>PM: resume of devices complete after 142.080 msecs
  1102. Restarting tasks ... done.
  1103. <6>PM: suspend exit 2016-10-29 04:59:22.026012689 UTC
  1104. <6>suspend: exit suspend, ret = 0 (2016-10-29 04:59:22.026043184 UTC)
  1105. <4>healthd: battery l=67 v=3844 t=32.0 h=2 st=2 c=833 chg=a
  1106. <6>PM: suspend entry 2016-10-29 04:59:22.240321566 UTC
  1107. Freezing user space processes ... (elapsed 0.001 seconds) done.
  1108. Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
  1109. Suspending console(s) (use no_console_suspend to debug)
  1110. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  1111. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  1112. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  1113. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  1114. <3>msm_wm8958_shutdown_power: codec power shutdown
  1115. <3>wm8994_ldo_power: Power down the WM8994 LDOs
  1116. max8903b_suspend: suspend
  1117. <6>PM: suspend of devices complete after 230.462 msecs
  1118. <6>PM: late suspend of devices complete after 5.827 msecs
  1119. <6>PM: noirq suspend of devices complete after 7.170 msecs
  1120. Disabling non-boot CPUs ...
  1121. <6>msm_pm_enter
  1122. <6>msm_pm_enter: power collapse
  1123. <6>msm_mpm_irqs_detectable: cannot monitor 0000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000<6>msm_pm_enter: return
  1124. <6>Enabling non-boot CPUs ...
  1125. <6>CPU1 is up
  1126. <6>PM: noirq resume of devices complete after 5.919 msecs
  1127. <6>wakeup wake lock: mmc1
  1128. <6>PM: early resume of devices complete after 5.672 msecs
  1129. max8903b_resume: resume
  1130. <3>msm_wm8958_setup_power: codec power setup
  1131. <4>8058_s3: Failed to create debugfs directory
  1132. <3>wm8994_ldo_power: Power up the WM8994 LDOs
  1133. <7>lm8502_mod_brightness: set LED1 brightness (100) percent
  1134. <7>lm8502_mod_brightness: set LED2 brightness (100) percent
  1135. <7>lm8502_mod_brightness: set LED1 brightness (100) percent
  1136. <7>lm8502_mod_brightness: set LED2 brightness (100) percent
  1137. <6>PM: resume of devices complete after 143.515 msecs
  1138. Restarting tasks ... done.
  1139. <6>PM: suspend exit 2016-10-29 04:59:23.028543839 UTC
  1140. <6>suspend: exit suspend, ret = 0 (2016-10-29 04:59:23.028574333 UTC)
  1141. <6>active wake lock mmc1_detect
  1142. <6>active wake lock mmc0_detect
  1143. <6>active wake lock power-supply
  1144. <4>healthd: battery l=67 v=3825 t=32.0 h=2 st=2 c=833 chg=a
  1145. <6>PM: suspend entry 2016-10-29 04:59:23.078372733 UTC
  1146. Freezing user space processes ... (elapsed 0.002 seconds) done.
  1147. Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
  1148. Suspending console(s) (use no_console_suspend to debug)
  1149. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  1150. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  1151. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  1152. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  1153. <3>msm_wm8958_shutdown_power: codec power shutdown
  1154. <3>wm8994_ldo_power: Power down the WM8994 LDOs
  1155. max8903b_suspend: suspend
  1156. <6>PM: suspend of devices complete after 237.296 msecs
  1157. <6>PM: late suspend of devices complete after 5.735 msecs
  1158. <6>PM: noirq suspend of devices complete after 7.504 msecs
  1159. Disabling non-boot CPUs ...
  1160. <6>msm_pm_enter
  1161. <6>msm_pm_enter: power collapse
  1162. <6>msm_mpm_irqs_detectable: cannot monitor 0000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000<6>msm_pm_enter: return
  1163. <6>Enabling non-boot CPUs ...
  1164. <6>CPU1 is up
  1165. <6>PM: noirq resume of devices complete after 5.796 msecs
  1166. <6>wakeup wake lock: alarm_rtc
  1167. <6>PM: early resume of devices complete after 5.856 msecs
  1168. max8903b_resume: resume
  1169. <3>msm_wm8958_setup_power: codec power setup
  1170. <4>8058_s3: Failed to create debugfs directory
  1171. <3>wm8994_ldo_power: Power up the WM8994 LDOs
  1172. <7>lm8502_mod_brightness: set LED1 brightness (100) percent
  1173. <7>lm8502_mod_brightness: set LED2 brightness (100) percent
  1174. <7>lm8502_mod_brightness: set LED1 brightness (100) percent
  1175. <7>lm8502_mod_brightness: set LED2 brightness (100) percent
  1176. <6>PM: resume of devices complete after 162.240 msecs
  1177. Restarting tasks ... done.
  1178. <6>PM: suspend exit 2016-10-29 04:59:27.030222285 UTC
  1179. <6>suspend: exit suspend, ret = 0 (2016-10-29 04:59:27.030252779 UTC)
  1180. <4>healthd: battery l=67 v=3825 t=32.0 h=2 st=2 c=833 chg=a
  1181. <6>cfg80211: Calling CRDA for country: US
  1182. <6>ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
  1183. <6>ADDRCONF(NETDEV_UP): wlan0: link is not ready
  1184. <6>PM: suspend entry 2016-10-29 05:00:40.513935444 UTC
  1185. Freezing user space processes ... (elapsed 0.004 seconds) done.
  1186. Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
  1187. Suspending console(s) (use no_console_suspend to debug)
  1188. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  1189. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  1190. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  1191. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  1192. <3>msm_wm8958_shutdown_power: codec power shutdown
  1193. <3>wm8994_ldo_power: Power down the WM8994 LDOs
  1194. max8903b_suspend: suspend
  1195. <6>PM: suspend of devices complete after 219.390 msecs
  1196. <6>PM: late suspend of devices complete after 5.981 msecs
  1197. <6>PM: noirq suspend of devices complete after 7.324 msecs
  1198. Disabling non-boot CPUs ...
  1199. <6>msm_pm_enter
  1200. <6>msm_pm_enter: power collapse
  1201. <6>msm_mpm_irqs_detectable: cannot monitor 0000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000<6>msm_pm_enter: return
  1202. <6>Enabling non-boot CPUs ...
  1203. <6>CPU1 is up
  1204. <6>PM: noirq resume of devices complete after 5.981 msecs
  1205. <6>wakeup wake lock: alarm_rtc
  1206. <6>PM: early resume of devices complete after 6.103 msecs
  1207. max8903b_resume: resume
  1208. <3>msm_wm8958_setup_power: codec power setup
  1209. <4>8058_s3: Failed to create debugfs directory
  1210. <3>wm8994_ldo_power: Power up the WM8994 LDOs
  1211. <7>lm8502_mod_brightness: set LED1 brightness (100) percent
  1212. <7>lm8502_mod_brightness: set LED2 brightness (100) percent
  1213. <7>lm8502_mod_brightness: set LED1 brightness (100) percent
  1214. <7>lm8502_mod_brightness: set LED2 brightness (100) percent
  1215. <6>PM: resume of devices complete after 185.461 msecs
  1216. Restarting tasks ... done.
  1217. <6>PM: suspend exit 2016-10-29 05:00:57.009454559 UTC
  1218. <6>suspend: exit suspend, ret = 0 (2016-10-29 05:00:57.009485058 UTC)
  1219. <6>active wake lock mmc1_detect
  1220. <6>active wake lock mmc0_detect
  1221. <6>active wake lock power-supply
  1222. <6>active wake lock alarm_rtc, time left 80
  1223. <4>healthd: battery l=67 v=3854 t=31.0 h=2 st=2 c=835 chg=a
  1224. <6>PM: suspend entry 2016-10-29 05:00:57.456602950 UTC
  1225. Freezing user space processes ... (elapsed 0.001 seconds) done.
  1226. Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
  1227. Suspending console(s) (use no_console_suspend to debug)
  1228. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  1229. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  1230. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  1231. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  1232. <3>msm_wm8958_shutdown_power: codec power shutdown
  1233. <3>wm8994_ldo_power: Power down the WM8994 LDOs
  1234. max8903b_suspend: suspend
  1235. <6>PM: suspend of devices complete after 211.109 msecs
  1236. <6>PM: late suspend of devices complete after 2.104 msecs
  1237. <6>PM: noirq suspend of devices complete after 2.653 msecs
  1238. Disabling non-boot CPUs ...
  1239. <6>msm_pm_enter
  1240. <6>msm_pm_enter: power collapse
  1241. <6>msm_mpm_irqs_detectable: cannot monitor 0000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000<6>msm_pm_enter: return
  1242. <6>Enabling non-boot CPUs ...
  1243. <6>CPU1 is up
  1244. <6>PM: noirq resume of devices complete after 2.104 msecs
  1245. <6>wakeup wake lock: alarm_rtc
  1246. <6>PM: early resume of devices complete after 2.135 msecs
  1247. max8903b_resume: resume
  1248. <3>msm_wm8958_setup_power: codec power setup
  1249. <4>8058_s3: Failed to create debugfs directory
  1250. <3>wm8994_ldo_power: Power up the WM8994 LDOs
  1251. <7>lm8502_mod_brightness: set LED1 brightness (100) percent
  1252. <7>lm8502_mod_brightness: set LED2 brightness (100) percent
  1253. <7>lm8502_mod_brightness: set LED1 brightness (100) percent
  1254. <7>lm8502_mod_brightness: set LED2 brightness (100) percent
  1255. <6>PM: resume of devices complete after 138.606 msecs
  1256. Restarting tasks ... done.
  1257. <6>PM: suspend exit 2016-10-29 05:02:04.025310514 UTC
  1258. <6>suspend: exit suspend, ret = 0 (2016-10-29 05:02:04.025310514 UTC)
  1259. <4>healthd: battery l=67 v=3859 t=31.0 h=2 st=2 c=832 chg=a
  1260. <6>PM: suspend entry 2016-10-29 05:02:04.085569735 UTC
  1261. Freezing user space processes ... (elapsed 0.001 seconds) done.
  1262. Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
  1263. Suspending console(s) (use no_console_suspend to debug)
  1264. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  1265. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  1266. <3>dpm_run_callback(): platform_pm_suspend+0x0/0x54 returns -16
  1267. <3>PM: Device alarm failed to suspend: error -16
  1268. <3>PM: Some devices failed to suspend
  1269. <7>lm8502_mod_brightness: set LED1 brightness (100) percent
  1270. <7>lm8502_mod_brightness: set LED2 brightness (100) percent
  1271. <6>PM: resume of devices complete after 2.196 msecs
  1272. Restarting tasks ... done.
  1273. <6>PM: suspend exit 2016-10-29 05:02:04.278932176 UTC
  1274. <6>suspend: exit suspend, ret = -16 (2016-10-29 05:02:04.278962681 UTC)
  1275. <6>PM: suspend entry 2016-10-29 05:02:04.785389062 UTC
  1276. Freezing user space processes ... (elapsed 0.002 seconds) done.
  1277. Freezing remaining freezable tasks ... (elapsed 0.003 seconds) done.
  1278. Suspending console(s) (use no_console_suspend to debug)
  1279. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  1280. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  1281. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  1282. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  1283. <3>msm_wm8958_shutdown_power: codec power shutdown
  1284. <3>wm8994_ldo_power: Power down the WM8994 LDOs
  1285. max8903b_suspend: suspend
  1286. <6>PM: suspend of devices complete after 222.854 msecs
  1287. <6>PM: late suspend of devices complete after 5.979 msecs
  1288. <6>PM: noirq suspend of devices complete after 7.261 msecs
  1289. Disabling non-boot CPUs ...
  1290. <6>msm_pm_enter
  1291. <6>msm_pm_enter: power collapse
  1292. <6>msm_mpm_irqs_detectable: cannot monitor 0000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000<6>msm_pm_enter: return
  1293. <6>Enabling non-boot CPUs ...
  1294. <6>CPU1 is up
  1295. <6>PM: noirq resume of devices complete after 5.979 msecs
  1296. <6>wakeup wake lock: alarm_rtc
  1297. <6>PM: early resume of devices complete after 5.734 msecs
  1298. max8903b_resume: resume
  1299. <3>msm_wm8958_setup_power: codec power setup
  1300. <4>8058_s3: Failed to create debugfs directory
  1301. <3>wm8994_ldo_power: Power up the WM8994 LDOs
  1302. <7>lm8502_mod_brightness: set LED1 brightness (100) percent
  1303. <7>lm8502_mod_brightness: set LED2 brightness (100) percent
  1304. <7>lm8502_mod_brightness: set LED1 brightness (100) percent
  1305. <7>lm8502_mod_brightness: set LED2 brightness (100) percent
  1306. <6>PM: resume of devices complete after 185.482 msecs
  1307. Restarting tasks ... done.
  1308. <6>PM: suspend exit 2016-10-29 05:04:20.019733696 UTC
  1309. <6>suspend: exit suspend, ret = 0 (2016-10-29 05:04:20.019764189 UTC)
  1310. <4>healthd: battery l=68 v=3864 t=30.0 h=2 st=2 c=835 chg=a
  1311. <6>PM: suspend entry 2016-10-29 05:04:20.144919381 UTC
  1312. Freezing user space processes ... (elapsed 0.002 seconds) done.
  1313. Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
  1314. Suspending console(s) (use no_console_suspend to debug)
  1315. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  1316. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  1317. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  1318. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  1319. <3>msm_wm8958_shutdown_power: codec power shutdown
  1320. <3>wm8994_ldo_power: Power down the WM8994 LDOs
  1321. max8903b_suspend: suspend
  1322. <6>PM: suspend of devices complete after 219.497 msecs
  1323. <6>PM: late suspend of devices complete after 5.918 msecs
  1324. <6>PM: noirq suspend of devices complete after 7.261 msecs
  1325. Disabling non-boot CPUs ...
  1326. <6>msm_pm_enter
  1327. <6>msm_pm_enter: power collapse
  1328. <6>msm_mpm_irqs_detectable: cannot monitor 0000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000<6>msm_pm_enter: return
  1329. <6>Enabling non-boot CPUs ...
  1330. <6>CPU1 is up
  1331. <6>PM: noirq resume of devices complete after 5.949 msecs
  1332. <6>wakeup wake lock: alarm_rtc
  1333. <6>PM: early resume of devices complete after 5.703 msecs
  1334. max8903b_resume: resume
  1335. <3>msm_wm8958_setup_power: codec power setup
  1336. <4>8058_s3: Failed to create debugfs directory
  1337. <3>wm8994_ldo_power: Power up the WM8994 LDOs
  1338. <7>lm8502_mod_brightness: set LED1 brightness (100) percent
  1339. <7>lm8502_mod_brightness: set LED2 brightness (100) percent
  1340. <7>lm8502_mod_brightness: set LED1 brightness (100) percent
  1341. <7>lm8502_mod_brightness: set LED2 brightness (100) percent
  1342. <6>PM: resume of devices complete after 167.761 msecs
  1343. Restarting tasks ... done.
  1344. <6>PM: suspend exit 2016-10-29 05:08:49.017354033 UTC
  1345. <6>suspend: exit suspend, ret = 0 (2016-10-29 05:08:49.017384528 UTC)
  1346. <4>healthd: battery l=69 v=3878 t=29.0 h=2 st=2 c=835 chg=a
  1347. <6>PM: suspend entry 2016-10-29 05:08:49.195454646 UTC
  1348. Freezing user space processes ... (elapsed 0.001 seconds) done.
  1349. Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
  1350. Suspending console(s) (use no_console_suspend to debug)
  1351. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  1352. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  1353. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  1354. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  1355. <3>msm_wm8958_shutdown_power: codec power shutdown
  1356. <3>wm8994_ldo_power: Power down the WM8994 LDOs
  1357. max8903b_suspend: suspend
  1358. <6>PM: suspend of devices complete after 251.399 msecs
  1359. <6>PM: late suspend of devices complete after 5.675 msecs
  1360. <6>PM: noirq suspend of devices complete after 7.292 msecs
  1361. Disabling non-boot CPUs ...
  1362. <6>msm_pm_enter
  1363. <6>msm_pm_enter: power collapse
  1364. <6>msm_mpm_irqs_detectable: cannot monitor 0000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000<6>msm_pm_enter: return
  1365. <6>Enabling non-boot CPUs ...
  1366. <6>CPU1 is up
  1367. <6>PM: noirq resume of devices complete after 5.797 msecs
  1368. <6>wakeup wake lock: alarm_rtc
  1369. <6>PM: early resume of devices complete after 5.825 msecs
  1370. max8903b_resume: resume
  1371. <3>msm_wm8958_setup_power: codec power setup
  1372. <4>8058_s3: Failed to create debugfs directory
  1373. <3>wm8994_ldo_power: Power up the WM8994 LDOs
  1374. <7>lm8502_mod_brightness: set LED1 brightness (100) percent
  1375. <7>lm8502_mod_brightness: set LED2 brightness (100) percent
  1376. <7>lm8502_mod_brightness: set LED1 brightness (100) percent
  1377. <7>lm8502_mod_brightness: set LED2 brightness (100) percent
  1378. <6>PM: resume of devices complete after 182.248 msecs
  1379. Restarting tasks ... done.
  1380. <6>PM: suspend exit 2016-10-29 05:24:26.028544685 UTC
  1381. <6>suspend: exit suspend, ret = 0 (2016-10-29 05:24:26.028575179 UTC)
  1382. <4>healthd: battery l=74 v=3916 t=27.0 h=2 st=2 c=835 chg=a
  1383. <6>PM: suspend entry 2016-10-29 05:24:26.235196903 UTC
  1384. Freezing user space processes ... (elapsed 0.001 seconds) done.
  1385. Freezing remaining freezable tasks ... <6>active wake lock alarm, time left 499
  1386.  
  1387. <3>Freezing of tasks aborted after 0.000 seconds (13 tasks refusing to freeze, wq_busy=0):
  1388.  
  1389. Restarting kernel threads ... done.
  1390. Restarting tasks ... done.
  1391. <6>PM: suspend exit 2016-10-29 05:24:26.314964575 UTC
  1392. <6>suspend: exit suspend, ret = -16 (2016-10-29 05:24:26.314995080 UTC)
  1393. <6>PM: suspend entry 2016-10-29 05:24:26.538505408 UTC
  1394. Freezing user space processes ... (elapsed 0.001 seconds) done.
  1395. Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
  1396. Suspending console(s) (use no_console_suspend to debug)
  1397. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  1398. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  1399. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  1400. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  1401. <3>msm_wm8958_shutdown_power: codec power shutdown
  1402. <3>wm8994_ldo_power: Power down the WM8994 LDOs
  1403. max8903b_suspend: suspend
  1404. <6>PM: suspend of devices complete after 222.946 msecs
  1405. <6>PM: late suspend of devices complete after 5.887 msecs
  1406. <6>PM: noirq suspend of devices complete after 7.290 msecs
  1407. Disabling non-boot CPUs ...
  1408. <6>msm_pm_enter
  1409. <6>msm_pm_enter: power collapse
  1410. <6>msm_mpm_irqs_detectable: cannot monitor 0000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000<6>msm_pm_enter: return
  1411. <6>Enabling non-boot CPUs ...
  1412. <6>CPU1 is up
  1413. <6>PM: noirq resume of devices complete after 5.918 msecs
  1414. <6>wakeup wake lock: alarm_rtc
  1415. <6>PM: early resume of devices complete after 5.887 msecs
  1416. max8903b_resume: resume
  1417. <3>msm_wm8958_setup_power: codec power setup
  1418. <4>8058_s3: Failed to create debugfs directory
  1419. <3>wm8994_ldo_power: Power up the WM8994 LDOs
  1420. <7>lm8502_mod_brightness: set LED1 brightness (100) percent
  1421. <7>lm8502_mod_brightness: set LED2 brightness (100) percent
  1422. <7>lm8502_mod_brightness: set LED1 brightness (100) percent
  1423. <7>lm8502_mod_brightness: set LED2 brightness (100) percent
  1424. <6>PM: resume of devices complete after 83.406 msecs
  1425. Restarting tasks ... done.
  1426. <6>PM: suspend exit 2016-10-29 05:42:22.026867767 UTC
  1427. <6>suspend: exit suspend, ret = 0 (2016-10-29 05:42:22.026898261 UTC)
  1428. <4>healthd: battery l=79 v=3964 t=25.0 h=2 st=2 c=835 chg=a
  1429. <6>PM: suspend entry 2016-10-29 05:42:22.177093602 UTC
  1430. Freezing user space processes ... (elapsed 0.022 seconds) done.
  1431. Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
  1432. Suspending console(s) (use no_console_suspend to debug)
  1433. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  1434. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  1435. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  1436. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  1437. <3>msm_wm8958_shutdown_power: codec power shutdown
  1438. <3>wm8994_ldo_power: Power down the WM8994 LDOs
  1439. max8903b_suspend: suspend
  1440. <6>PM: suspend of devices complete after 227.492 msecs
  1441. <6>PM: late suspend of devices complete after 5.919 msecs
  1442. <6>PM: noirq suspend of devices complete after 7.292 msecs
  1443. Disabling non-boot CPUs ...
  1444. <6>msm_pm_enter
  1445. <6>msm_pm_enter: power collapse
  1446. <6>msm_mpm_irqs_detectable: cannot monitor 0000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000<6>msm_pm_enter: return
  1447. <6>Enabling non-boot CPUs ...
  1448. <6>CPU1 is up
  1449. <6>PM: noirq resume of devices complete after 5.888 msecs
  1450. <6>wakeup wake lock: alarm_rtc
  1451. <6>PM: early resume of devices complete after 5.948 msecs
  1452. max8903b_resume: resume
  1453. <3>msm_wm8958_setup_power: codec power setup
  1454. <4>8058_s3: Failed to create debugfs directory
  1455. <3>wm8994_ldo_power: Power up the WM8994 LDOs
  1456. <7>lm8502_mod_brightness: set LED1 brightness (100) percent
  1457. <7>lm8502_mod_brightness: set LED2 brightness (100) percent
  1458. <7>lm8502_mod_brightness: set LED1 brightness (100) percent
  1459. <7>lm8502_mod_brightness: set LED2 brightness (100) percent
  1460. <6>PM: resume of devices complete after 87.461 msecs
  1461. Restarting tasks ... done.
  1462. <6>PM: suspend exit 2016-10-29 05:54:22.021591395 UTC
  1463. <6>suspend: exit suspend, ret = 0 (2016-10-29 05:54:22.021621889 UTC)
  1464. <4>healthd: battery l=83 v=3993 t=24.0 h=2 st=2 c=835 chg=a
  1465. <6>PM: suspend entry 2016-10-29 05:54:22.162423773 UTC
  1466. Freezing user space processes ... (elapsed 0.342 seconds) done.
  1467. Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
  1468. Suspending console(s) (use no_console_suspend to debug)
  1469. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  1470. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  1471. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  1472. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  1473. <3>msm_wm8958_shutdown_power: codec power shutdown
  1474. <3>wm8994_ldo_power: Power down the WM8994 LDOs
  1475. max8903b_suspend: suspend
  1476. <6>PM: suspend of devices complete after 223.849 msecs
  1477. <6>PM: late suspend of devices complete after 5.857 msecs
  1478. <6>PM: noirq suspend of devices complete after 7.321 msecs
  1479. Disabling non-boot CPUs ...
  1480. <6>msm_pm_enter
  1481. <6>msm_pm_enter: power collapse
  1482. <6>msm_mpm_irqs_detectable: cannot monitor 0000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000<6>msm_pm_enter: return
  1483. <6>Enabling non-boot CPUs ...
  1484. <6>CPU1 is up
  1485. <6>PM: noirq resume of devices complete after 5.949 msecs
  1486. <6>wakeup wake lock: alarm_rtc
  1487. <6>PM: early resume of devices complete after 5.857 msecs
  1488. max8903b_resume: resume
  1489. <3>msm_wm8958_setup_power: codec power setup
  1490. <4>8058_s3: Failed to create debugfs directory
  1491. <3>wm8994_ldo_power: Power up the WM8994 LDOs
  1492. <7>lm8502_mod_brightness: set LED1 brightness (100) percent
  1493. <7>lm8502_mod_brightness: set LED2 brightness (100) percent
  1494. <7>lm8502_mod_brightness: set LED1 brightness (100) percent
  1495. <7>lm8502_mod_brightness: set LED2 brightness (100) percent
  1496. <6>PM: resume of devices complete after 145.497 msecs
  1497. Restarting tasks ... done.
  1498. <6>PM: suspend exit 2016-10-29 05:55:51.025769110 UTC
  1499. <6>suspend: exit suspend, ret = 0 (2016-10-29 05:55:51.025799605 UTC)
  1500. <4>healthd: battery l=83 v=3998 t=24.0 h=2 st=2 c=835 chg=a
  1501. <6>PM: suspend entry 2016-10-29 05:55:51.261642653 UTC
  1502. Freezing user space processes ... (elapsed 0.002 seconds) done.
  1503. Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
  1504. Suspending console(s) (use no_console_suspend to debug)
  1505. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  1506. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  1507. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  1508. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  1509. <3>msm_wm8958_shutdown_power: codec power shutdown
  1510. <3>wm8994_ldo_power: Power down the WM8994 LDOs
  1511. max8903b_suspend: suspend
  1512. <6>PM: suspend of devices complete after 220.262 msecs
  1513. <6>PM: late suspend of devices complete after 2.074 msecs
  1514. <6>PM: noirq suspend of devices complete after 2.776 msecs
  1515. Disabling non-boot CPUs ...
  1516. <6>msm_pm_enter
  1517. <6>msm_pm_enter: power collapse
  1518. <6>msm_mpm_irqs_detectable: cannot monitor 0000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000<6>msm_pm_enter: return
  1519. <6>Enabling non-boot CPUs ...
  1520. <6>CPU1 is up
  1521. <6>PM: noirq resume of devices complete after 3.630 msecs
  1522. <6>wakeup wake lock: alarm_rtc
  1523. <6>PM: early resume of devices complete after 3.629 msecs
  1524. max8903b_resume: resume
  1525. <3>msm_wm8958_setup_power: codec power setup
  1526. <4>8058_s3: Failed to create debugfs directory
  1527. <3>wm8994_ldo_power: Power up the WM8994 LDOs
  1528. <7>lm8502_mod_brightness: set LED1 brightness (100) percent
  1529. <7>lm8502_mod_brightness: set LED2 brightness (100) percent
  1530. <7>lm8502_mod_brightness: set LED1 brightness (100) percent
  1531. <7>lm8502_mod_brightness: set LED2 brightness (100) percent
  1532. <6>PM: resume of devices complete after 137.782 msecs
  1533. Restarting tasks ... done.
  1534. <6>PM: suspend exit 2016-10-29 05:56:01.021712468 UTC
  1535. <6>suspend: exit suspend, ret = 0 (2016-10-29 05:56:01.021742961 UTC)
  1536. <4>healthd: battery l=83 v=3998 t=24.0 h=2 st=2 c=835 chg=a
  1537. <6>PM: suspend entry 2016-10-29 05:56:01.170779351 UTC
  1538. Freezing user space processes ... (elapsed 0.002 seconds) done.
  1539. Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
  1540. Suspending console(s) (use no_console_suspend to debug)
  1541. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  1542. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  1543. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  1544. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  1545. <3>msm_wm8958_shutdown_power: codec power shutdown
  1546. <3>wm8994_ldo_power: Power down the WM8994 LDOs
  1547. max8903b_suspend: suspend
  1548. <6>PM: suspend of devices complete after 251.183 msecs
  1549. <6>PM: late suspend of devices complete after 5.675 msecs
  1550. <6>PM: noirq suspend of devices complete after 7.292 msecs
  1551. Disabling non-boot CPUs ...
  1552. <6>msm_pm_enter
  1553. <6>msm_pm_enter: power collapse
  1554. <6>msm_mpm_irqs_detectable: cannot monitor 0000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000<6>msm_pm_enter: return
  1555. <6>Enabling non-boot CPUs ...
  1556. <6>CPU1 is up
  1557. <6>PM: noirq resume of devices complete after 5.797 msecs
  1558. <6>wakeup wake lock: alarm_rtc
  1559. <6>PM: early resume of devices complete after 5.886 msecs
  1560. max8903b_resume: resume
  1561. <3>msm_wm8958_setup_power: codec power setup
  1562. <4>8058_s3: Failed to create debugfs directory
  1563. <3>wm8994_ldo_power: Power up the WM8994 LDOs
  1564. <7>lm8502_mod_brightness: set LED1 brightness (100) percent
  1565. <7>lm8502_mod_brightness: set LED2 brightness (100) percent
  1566. <7>lm8502_mod_brightness: set LED1 brightness (100) percent
  1567. <7>lm8502_mod_brightness: set LED2 brightness (100) percent
  1568. <6>PM: resume of devices complete after 89.993 msecs
  1569. Restarting tasks ... done.
  1570. <6>PM: suspend exit 2016-10-29 05:56:29.013113295 UTC
  1571. <6>suspend: exit suspend, ret = 0 (2016-10-29 05:56:29.013143791 UTC)
  1572. <4>healthd: battery l=83 v=3998 t=24.0 h=2 st=2 c=835 chg=a
  1573. <6>PM: suspend entry 2016-10-29 05:56:29.085141780 UTC
  1574. Freezing user space processes ... (elapsed 0.002 seconds) done.
  1575. Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
  1576. Suspending console(s) (use no_console_suspend to debug)
  1577. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  1578. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  1579. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  1580. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  1581. <3>msm_wm8958_shutdown_power: codec power shutdown
  1582. <3>wm8994_ldo_power: Power down the WM8994 LDOs
  1583. max8903b_suspend: suspend
  1584. <6>PM: suspend of devices complete after 235.585 msecs
  1585. <6>PM: late suspend of devices complete after 5.887 msecs
  1586. <6>PM: noirq suspend of devices complete after 7.199 msecs
  1587. Disabling non-boot CPUs ...
  1588. <6>msm_pm_enter
  1589. <6>msm_pm_enter: power collapse
  1590. <6>msm_mpm_irqs_detectable: cannot monitor 0000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000<6>msm_pm_enter: return
  1591. <6>Enabling non-boot CPUs ...
  1592. <6>CPU1 is up
  1593. <6>PM: noirq resume of devices complete after 6.009 msecs
  1594. <6>wakeup wake lock: alarm_rtc
  1595. <6>PM: early resume of devices complete after 5.673 msecs
  1596. max8903b_resume: resume
  1597. <3>msm_wm8958_setup_power: codec power setup
  1598. <4>8058_s3: Failed to create debugfs directory
  1599. <3>wm8994_ldo_power: Power up the WM8994 LDOs
  1600. <7>lm8502_mod_brightness: set LED1 brightness (100) percent
  1601. <7>lm8502_mod_brightness: set LED2 brightness (100) percent
  1602. <7>lm8502_mod_brightness: set LED1 brightness (100) percent
  1603. <7>lm8502_mod_brightness: set LED2 brightness (100) percent
  1604. <6>PM: resume of devices complete after 182.523 msecs
  1605. Restarting tasks ... done.
  1606. <6>PM: suspend exit 2016-10-29 06:09:51.009668590 UTC
  1607. <6>suspend: exit suspend, ret = 0 (2016-10-29 06:09:51.009668590 UTC)
  1608. <6>PM: suspend entry 2016-10-29 06:09:51.062605077 UTC
  1609. Freezing user space processes ... (elapsed 0.008 seconds) done.
  1610. Freezing remaining freezable tasks ... (elapsed 0.003 seconds) done.
  1611. Suspending console(s) (use no_console_suspend to debug)
  1612. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  1613. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  1614. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  1615. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  1616. <3>msm_wm8958_shutdown_power: codec power shutdown
  1617. <3>wm8994_ldo_power: Power down the WM8994 LDOs
  1618. max8903b_suspend: suspend
  1619. <6>PM: suspend of devices complete after 214.073 msecs
  1620. <6>PM: late suspend of devices complete after 2.074 msecs
  1621. <6>active wake lock alarm, time left 484
  1622. <3>dpm_run_callback(): power_suspend_late+0x0/0x58 returns -11
  1623. <3>PM: Device power.0 failed to suspend noirq: error -11
  1624. <6>PM: noirq resume of devices complete after 1.677 msecs
  1625. <6>PM: early resume of devices complete after 1.952 msecs
  1626. <3>PM: Some devices failed to power down
  1627. max8903b_resume: resume
  1628. <3>msm_wm8958_setup_power: codec power setup
  1629. <4>8058_s3: Failed to create debugfs directory
  1630. <3>wm8994_ldo_power: Power up the WM8994 LDOs
  1631. <7>lm8502_mod_brightness: set LED1 brightness (100) percent
  1632. <7>lm8502_mod_brightness: set LED2 brightness (100) percent
  1633. <7>lm8502_mod_brightness: set LED1 brightness (100) percent
  1634. <7>lm8502_mod_brightness: set LED2 brightness (100) percent
  1635. <6>PM: resume of devices complete after 163.286 msecs
  1636. Restarting tasks ... <4>healthd: battery l=87 v=4032 t=24.0 h=2 st=2 c=835 chg=a
  1637. done.
  1638. <6>PM: suspend exit 2016-10-29 06:09:51.496822311 UTC
  1639. <6>suspend: exit suspend, ret = -11 (2016-10-29 06:09:51.496852822 UTC)
  1640. <4>healthd: battery l=87 v=4032 t=24.0 h=2 st=2 c=835 chg=a
  1641. <38>type=1400 audit(1477721391.690:62): avc: denied { getattr } for pid=2792 comm="Thread-42" path="/cache/recovery" dev="dm-10" ino=6497 scontext=u:r:untrusted_app:s0 tcontext=u:object_r:recovery_cache_file:s0 tclass=dir permissive=1
  1642. <38>type=1400 audit(1477721391.690:63): avc: denied { read } for pid=2792 comm="Thread-42" name="recovery" dev="dm-10" ino=6497 scontext=u:r:untrusted_app:s0 tcontext=u:object_r:recovery_cache_file:s0 tclass=dir permissive=1
  1643. <38>type=1400 audit(1477721391.690:64): avc: denied { open } for pid=2792 comm="Thread-42" name="recovery" dev="dm-10" ino=6497 scontext=u:r:untrusted_app:s0 tcontext=u:object_r:recovery_cache_file:s0 tclass=dir permissive=1
  1644. <38>type=1400 audit(1477721391.690:65): avc: denied { getattr } for pid=2792 comm="Thread-42" path="/cache/recovery/last_log" dev="dm-10" ino=6502 scontext=u:r:untrusted_app:s0 tcontext=u:object_r:recovery_cache_file:s0 tclass=file permissive=1
  1645. <6>PM: suspend entry 2016-10-29 06:10:00.793232860 UTC
  1646. Freezing user space processes ... (elapsed 0.002 seconds) done.
  1647. Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
  1648. Suspending console(s) (use no_console_suspend to debug)
  1649. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  1650. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  1651. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  1652. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  1653. <3>msm_wm8958_shutdown_power: codec power shutdown
  1654. <3>wm8994_ldo_power: Power down the WM8994 LDOs
  1655. max8903b_suspend: suspend
  1656. <6>PM: suspend of devices complete after 241.424 msecs
  1657. <6>PM: late suspend of devices complete after 5.737 msecs
  1658. <6>PM: noirq suspend of devices complete after 7.293 msecs
  1659. Disabling non-boot CPUs ...
  1660. <6>msm_pm_enter
  1661. <6>msm_pm_enter: power collapse
  1662. <6>msm_mpm_irqs_detectable: cannot monitor 0000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000<6>msm_pm_enter: return
  1663. <6>Enabling non-boot CPUs ...
  1664. <6>CPU1 is up
  1665. <6>PM: noirq resume of devices complete after 5.981 msecs
  1666. <6>wakeup wake lock: alarm_rtc
  1667. <6>PM: early resume of devices complete after 5.828 msecs
  1668. max8903b_resume: resume
  1669. <3>msm_wm8958_setup_power: codec power setup
  1670. <4>8058_s3: Failed to create debugfs directory
  1671. <3>wm8994_ldo_power: Power up the WM8994 LDOs
  1672. <7>lm8502_mod_brightness: set LED1 brightness (100) percent
  1673. <7>lm8502_mod_brightness: set LED2 brightness (100) percent
  1674. <7>lm8502_mod_brightness: set LED1 brightness (100) percent
  1675. <7>lm8502_mod_brightness: set LED2 brightness (100) percent
  1676. <6>PM: resume of devices complete after 94.553 msecs
  1677. Restarting tasks ... done.
  1678. <6>PM: suspend exit 2016-10-29 06:11:52.017566485 UTC
  1679. <6>suspend: exit suspend, ret = 0 (2016-10-29 06:11:52.017566485 UTC)
  1680. <4>healthd: battery l=88 v=4036 t=24.0 h=2 st=2 c=835 chg=a
  1681. <6>PM: suspend entry 2016-10-29 06:11:52.140922863 UTC
  1682. Freezing user space processes ... (elapsed 0.002 seconds) done.
  1683. Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
  1684. Suspending console(s) (use no_console_suspend to debug)
  1685. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  1686. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  1687. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  1688. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  1689. <3>msm_wm8958_shutdown_power: codec power shutdown
  1690. <3>wm8994_ldo_power: Power down the WM8994 LDOs
  1691. max8903b_suspend: suspend
  1692. <6>PM: suspend of devices complete after 212.821 msecs
  1693. <6>PM: late suspend of devices complete after 2.105 msecs
  1694. <6>PM: noirq suspend of devices complete after 2.654 msecs
  1695. Disabling non-boot CPUs ...
  1696. <6>msm_pm_enter
  1697. <6>msm_pm_enter: power collapse
  1698. <6>msm_mpm_irqs_detectable: cannot monitor 0000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000<6>msm_pm_enter: return
  1699. <6>Enabling non-boot CPUs ...
  1700. <6>CPU1 is up
  1701. <6>PM: noirq resume of devices complete after 2.166 msecs
  1702. <6>wakeup wake lock: alarm_rtc
  1703. <6>PM: early resume of devices complete after 2.044 msecs
  1704. max8903b_resume: resume
  1705. <3>msm_wm8958_setup_power: codec power setup
  1706. <4>8058_s3: Failed to create debugfs directory
  1707. <3>wm8994_ldo_power: Power up the WM8994 LDOs
  1708. <7>lm8502_mod_brightness: set LED1 brightness (100) percent
  1709. <7>lm8502_mod_brightness: set LED2 brightness (100) percent
  1710. <7>lm8502_mod_brightness: set LED1 brightness (100) percent
  1711. <7>lm8502_mod_brightness: set LED2 brightness (100) percent
  1712. <6>PM: resume of devices complete after 169.685 msecs
  1713. Restarting tasks ... done.
  1714. <6>PM: suspend exit 2016-10-29 06:24:03.017231838 UTC
  1715. <6>suspend: exit suspend, ret = 0 (2016-10-29 06:24:03.017262337 UTC)
  1716. <4>healthd: battery l=92 v=4065 t=23.0 h=2 st=2 c=750 chg=a
  1717. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  1718. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  1719. <6>PM: suspend entry 2016-10-29 06:24:03.211924374 UTC
  1720. Freezing user space processes ... (elapsed 0.001 seconds) done.
  1721. Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
  1722. Suspending console(s) (use no_console_suspend to debug)
  1723. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  1724. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  1725. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  1726. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  1727. <3>msm_wm8958_shutdown_power: codec power shutdown
  1728. <3>wm8994_ldo_power: Power down the WM8994 LDOs
  1729. max8903b_suspend: suspend
  1730. <6>PM: suspend of devices complete after 239.840 msecs
  1731. <6>PM: late suspend of devices complete after 5.888 msecs
  1732. <6>PM: noirq suspend of devices complete after 7.200 msecs
  1733. Disabling non-boot CPUs ...
  1734. <6>msm_pm_enter
  1735. <6>msm_pm_enter: power collapse
  1736. <6>msm_mpm_irqs_detectable: cannot monitor 0000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000<6>msm_pm_enter: return
  1737. <6>Enabling non-boot CPUs ...
  1738. <6>CPU1 is up
  1739. <6>PM: noirq resume of devices complete after 5.949 msecs
  1740. <6>wakeup wake lock: alarm_rtc
  1741. <6>PM: early resume of devices complete after 5.702 msecs
  1742. max8903b_resume: resume
  1743. <3>msm_wm8958_setup_power: codec power setup
  1744. <4>8058_s3: Failed to create debugfs directory
  1745. <3>wm8994_ldo_power: Power up the WM8994 LDOs
  1746. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  1747. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  1748. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  1749. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  1750. <6>PM: resume of devices complete after 168.890 msecs
  1751. Restarting tasks ... done.
  1752. <6>PM: suspend exit 2016-10-29 06:36:03.015310644 UTC
  1753. <6>suspend: exit suspend, ret = 0 (2016-10-29 06:36:03.015341136 UTC)
  1754. <4>healthd: battery l=95 v=4080 t=23.0 h=2 st=2 c=592 chg=a
  1755. <6>PM: suspend entry 2016-10-29 06:36:03.073553970 UTC
  1756. Freezing user space processes ... (elapsed 0.002 seconds) done.
  1757. Freezing remaining freezable tasks ... <6>active wake lock alarm, time left 499
  1758.  
  1759. <3>Freezing of tasks aborted after 0.001 seconds (13 tasks refusing to freeze, wq_busy=0):
  1760.  
  1761. Restarting kernel threads ... done.
  1762. Restarting tasks ... done.
  1763. <6>PM: suspend exit 2016-10-29 06:36:03.108871365 UTC
  1764. <6>suspend: exit suspend, ret = -16 (2016-10-29 06:36:03.108932357 UTC)
  1765. <6>PM: suspend entry 2016-10-29 06:36:03.276742397 UTC
  1766. Freezing user space processes ... (elapsed 0.003 seconds) done.
  1767. Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
  1768. Suspending console(s) (use no_console_suspend to debug)
  1769. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  1770. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  1771. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  1772. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  1773. <3>msm_wm8958_shutdown_power: codec power shutdown
  1774. <3>wm8994_ldo_power: Power down the WM8994 LDOs
  1775. max8903b_suspend: suspend
  1776. <6>PM: suspend of devices complete after 234.094 msecs
  1777. <6>PM: late suspend of devices complete after 5.675 msecs
  1778. <6>PM: noirq suspend of devices complete after 7.322 msecs
  1779. Disabling non-boot CPUs ...
  1780. <6>msm_pm_enter
  1781. <6>msm_pm_enter: power collapse
  1782. <6>msm_mpm_irqs_detectable: cannot monitor 0000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000<6>msm_pm_enter: return
  1783. <6>Enabling non-boot CPUs ...
  1784. <6>CPU1 is up
  1785. <6>PM: noirq resume of devices complete after 5.919 msecs
  1786. <6>wakeup wake lock: alarm_rtc
  1787. <6>PM: early resume of devices complete after 5.856 msecs
  1788. max8903b_resume: resume
  1789. <3>msm_wm8958_setup_power: codec power setup
  1790. <4>8058_s3: Failed to create debugfs directory
  1791. <3>wm8994_ldo_power: Power up the WM8994 LDOs
  1792. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  1793. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  1794. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  1795. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  1796. <6>PM: resume of devices complete after 92.067 msecs
  1797. Restarting tasks ... done.
  1798. <6>PM: suspend exit 2016-10-29 06:54:32.011070076 UTC
  1799. <6>suspend: exit suspend, ret = 0 (2016-10-29 06:54:32.011100572 UTC)
  1800. <4>healthd: battery l=100 v=4094 t=22.0 h=2 st=5 c=412 chg=a
  1801. <6>PM: suspend entry 2016-10-29 06:54:32.057115532 UTC
  1802. Freezing user space processes ... (elapsed 0.001 seconds) done.
  1803. Freezing remaining freezable tasks ... (elapsed 0.002 seconds) done.
  1804. Suspending console(s) (use no_console_suspend to debug)
  1805. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  1806. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  1807. <3>dpm_run_callback(): platform_pm_suspend+0x0/0x54 returns -16
  1808. <3>PM: Device alarm failed to suspend: error -16
  1809. <3>PM: Some devices failed to suspend
  1810. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  1811. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  1812. <6>PM: resume of devices complete after 3.172 msecs
  1813. Restarting tasks ... done.
  1814. <6>PM: suspend exit 2016-10-29 06:54:32.272468791 UTC
  1815. <6>suspend: exit suspend, ret = -16 (2016-10-29 06:54:32.272468791 UTC)
  1816. <6>PM: suspend entry 2016-10-29 06:54:33.047993193 UTC
  1817. Freezing user space processes ... (elapsed 0.001 seconds) done.
  1818. Freezing remaining freezable tasks ... (elapsed 0.002 seconds) done.
  1819. Suspending console(s) (use no_console_suspend to debug)
  1820. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  1821. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  1822. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  1823. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  1824. <3>msm_wm8958_shutdown_power: codec power shutdown
  1825. <3>wm8994_ldo_power: Power down the WM8994 LDOs
  1826. max8903b_suspend: suspend
  1827. <6>PM: suspend of devices complete after 225.537 msecs
  1828. <6>PM: late suspend of devices complete after 5.675 msecs
  1829. <6>PM: noirq suspend of devices complete after 7.384 msecs
  1830. Disabling non-boot CPUs ...
  1831. <6>msm_pm_enter
  1832. <6>msm_pm_enter: power collapse
  1833. <6>msm_mpm_irqs_detectable: cannot monitor 0000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000<6>msm_pm_enter: return
  1834. <6>Enabling non-boot CPUs ...
  1835. <6>CPU1 is up
  1836. <6>PM: noirq resume of devices complete after 5.888 msecs
  1837. <6>wakeup wake lock: alarm_rtc
  1838. <6>PM: early resume of devices complete after 5.948 msecs
  1839. max8903b_resume: resume
  1840. <3>msm_wm8958_setup_power: codec power setup
  1841. <4>8058_s3: Failed to create debugfs directory
  1842. <3>wm8994_ldo_power: Power up the WM8994 LDOs
  1843. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  1844. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  1845. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  1846. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  1847. <6>PM: resume of devices complete after 90.084 msecs
  1848. Restarting tasks ... done.
  1849. <6>PM: suspend exit 2016-10-29 06:55:51.023481445 UTC
  1850. <6>suspend: exit suspend, ret = 0 (2016-10-29 06:55:51.023511937 UTC)
  1851. <4>healthd: battery l=100 v=4099 t=22.0 h=2 st=5 c=402 chg=a
  1852. <6>PM: suspend entry 2016-10-29 06:55:51.072393683 UTC
  1853. Freezing user space processes ... (elapsed 0.002 seconds) done.
  1854. Freezing remaining freezable tasks ... (elapsed 0.002 seconds) done.
  1855. Suspending console(s) (use no_console_suspend to debug)
  1856. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  1857. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  1858. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  1859. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  1860. <3>msm_wm8958_shutdown_power: codec power shutdown
  1861. <3>wm8994_ldo_power: Power down the WM8994 LDOs
  1862. max8903b_suspend: suspend
  1863. <6>PM: suspend of devices complete after 235.924 msecs
  1864. <6>PM: late suspend of devices complete after 5.887 msecs
  1865. <6>active wake lock alarm, time left 491
  1866. <3>dpm_run_callback(): power_suspend_late+0x0/0x58 returns -11
  1867. <3>PM: Device power.0 failed to suspend noirq: error -11
  1868. <6>PM: noirq resume of devices complete after 5.247 msecs
  1869. <6>PM: early resume of devices complete after 5.552 msecs
  1870. <3>PM: Some devices failed to power down
  1871. max8903b_resume: resume
  1872. <3>msm_wm8958_setup_power: codec power setup
  1873. <4>8058_s3: Failed to create debugfs directory
  1874. <3>wm8994_ldo_power: Power up the WM8994 LDOs
  1875. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  1876. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  1877. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  1878. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  1879. <6>PM: resume of devices complete after 162.069 msecs
  1880. Restarting tasks ... done.
  1881. <6>PM: suspend exit 2016-10-29 06:55:51.541370129 UTC
  1882. <6>suspend: exit suspend, ret = -11 (2016-10-29 06:55:51.541400641 UTC)
  1883. <4>healthd: battery l=100 v=4099 t=22.0 h=2 st=5 c=402 chg=a
  1884. <6>PM: suspend entry 2016-10-29 06:55:51.685675726 UTC
  1885. Freezing user space processes ... (elapsed 0.003 seconds) done.
  1886. Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
  1887. Suspending console(s) (use no_console_suspend to debug)
  1888. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  1889. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  1890. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  1891. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  1892. <3>msm_wm8958_shutdown_power: codec power shutdown
  1893. <3>wm8994_ldo_power: Power down the WM8994 LDOs
  1894. max8903b_suspend: suspend
  1895. <6>PM: suspend of devices complete after 251.516 msecs
  1896. <6>PM: late suspend of devices complete after 5.674 msecs
  1897. <6>PM: noirq suspend of devices complete after 7.321 msecs
  1898. Disabling non-boot CPUs ...
  1899. <6>msm_pm_enter
  1900. <6>msm_pm_enter: power collapse
  1901. <6>msm_mpm_irqs_detectable: cannot monitor 0000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000<6>msm_pm_enter: return
  1902. <6>Enabling non-boot CPUs ...
  1903. <6>CPU1 is up
  1904. <6>PM: noirq resume of devices complete after 5.796 msecs
  1905. <6>wakeup wake lock: alarm_rtc
  1906. <6>PM: early resume of devices complete after 5.856 msecs
  1907. max8903b_resume: resume
  1908. <3>msm_wm8958_setup_power: codec power setup
  1909. <4>8058_s3: Failed to create debugfs directory
  1910. <3>wm8994_ldo_power: Power up the WM8994 LDOs
  1911. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  1912. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  1913. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  1914. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  1915. <6>PM: resume of devices complete after 182.370 msecs
  1916. Restarting tasks ... done.
  1917. <6>PM: suspend exit 2016-10-29 06:56:02.016683331 UTC
  1918. <6>suspend: exit suspend, ret = 0 (2016-10-29 06:56:02.016713823 UTC)
  1919. <4>healthd: battery l=100 v=4099 t=22.0 h=2 st=5 c=401 chg=a
  1920. <6>PM: suspend entry 2016-10-29 06:56:02.138483615 UTC
  1921. Freezing user space processes ... (elapsed 0.003 seconds) done.
  1922. Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
  1923. Suspending console(s) (use no_console_suspend to debug)
  1924. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  1925. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  1926. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  1927. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  1928. <3>msm_wm8958_shutdown_power: codec power shutdown
  1929. <3>wm8994_ldo_power: Power down the WM8994 LDOs
  1930. max8903b_suspend: suspend
  1931. <6>PM: suspend of devices complete after 256.874 msecs
  1932. <6>PM: late suspend of devices complete after 5.674 msecs
  1933. <6>PM: noirq suspend of devices complete after 7.383 msecs
  1934. Disabling non-boot CPUs ...
  1935. <6>msm_pm_enter
  1936. <6>msm_pm_enter: power collapse
  1937. <6>msm_mpm_irqs_detectable: cannot monitor 0000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000<6>msm_pm_enter: return
  1938. <6>Enabling non-boot CPUs ...
  1939. <6>CPU1 is up
  1940. <6>PM: noirq resume of devices complete after 5.796 msecs
  1941. <6>wakeup wake lock: alarm_rtc
  1942. <6>PM: early resume of devices complete after 5.795 msecs
  1943. max8903b_resume: resume
  1944. <3>msm_wm8958_setup_power: codec power setup
  1945. <4>8058_s3: Failed to create debugfs directory
  1946. <3>wm8994_ldo_power: Power up the WM8994 LDOs
  1947. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  1948. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  1949. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  1950. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  1951. <6>PM: resume of devices complete after 150.346 msecs
  1952. Restarting tasks ... done.
  1953. <6>PM: suspend exit 2016-10-29 06:56:33.034399817 UTC
  1954. <6>suspend: exit suspend, ret = 0 (2016-10-29 06:56:33.034399817 UTC)
  1955. <4>healthd: battery l=100 v=4099 t=22.0 h=2 st=5 c=397 chg=a
  1956. <6>PM: suspend entry 2016-10-29 06:56:33.085661810 UTC
  1957. Freezing user space processes ... (elapsed 0.002 seconds) done.
  1958. Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
  1959. Suspending console(s) (use no_console_suspend to debug)
  1960. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  1961. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  1962. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  1963. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  1964. <3>msm_wm8958_shutdown_power: codec power shutdown
  1965. <3>wm8994_ldo_power: Power down the WM8994 LDOs
  1966. max8903b_suspend: suspend
  1967. <6>PM: suspend of devices complete after 221.003 msecs
  1968. <6>PM: late suspend of devices complete after 2.074 msecs
  1969. <6>PM: noirq suspend of devices complete after 2.776 msecs
  1970. Disabling non-boot CPUs ...
  1971. <6>msm_pm_enter
  1972. <6>msm_pm_enter: power collapse
  1973. <6>msm_mpm_irqs_detectable: cannot monitor 0000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000<6>msm_pm_enter: return
  1974. <6>Enabling non-boot CPUs ...
  1975. <6>CPU1 is up
  1976. <6>PM: noirq resume of devices complete after 3.630 msecs
  1977. <6>wakeup wake lock: alarm_rtc
  1978. <6>PM: early resume of devices complete after 3.660 msecs
  1979. max8903b_resume: resume
  1980. <3>msm_wm8958_setup_power: codec power setup
  1981. <4>8058_s3: Failed to create debugfs directory
  1982. <3>wm8994_ldo_power: Power up the WM8994 LDOs
  1983. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  1984. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  1985. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  1986. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  1987. <6>PM: resume of devices complete after 154.799 msecs
  1988. Restarting tasks ... done.
  1989. <6>PM: suspend exit 2016-10-29 07:06:33.015828581 UTC
  1990. <6>suspend: exit suspend, ret = 0 (2016-10-29 07:06:33.015859075 UTC)
  1991. <4>healthd: battery l=100 v=4104 t=22.0 h=2 st=5 c=326 chg=a
  1992. <6>PM: suspend entry 2016-10-29 07:06:33.153274703 UTC
  1993. Freezing user space processes ... (elapsed 0.002 seconds) done.
  1994. Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
  1995. Suspending console(s) (use no_console_suspend to debug)
  1996. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  1997. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  1998. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  1999. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  2000. <3>msm_wm8958_shutdown_power: codec power shutdown
  2001. <3>wm8994_ldo_power: Power down the WM8994 LDOs
  2002. max8903b_suspend: suspend
  2003. <6>PM: suspend of devices complete after 235.369 msecs
  2004. <6>PM: late suspend of devices complete after 5.766 msecs
  2005. <6>PM: noirq suspend of devices complete after 7.200 msecs
  2006. Disabling non-boot CPUs ...
  2007. <6>msm_pm_enter
  2008. <6>msm_pm_enter: power collapse
  2009. <6>msm_mpm_irqs_detectable: cannot monitor 0000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000<6>msm_pm_enter: return
  2010. <6>Enabling non-boot CPUs ...
  2011. <6>CPU1 is up
  2012. <6>PM: noirq resume of devices complete after 5.949 msecs
  2013. <6>wakeup wake lock: alarm_rtc
  2014. <6>PM: early resume of devices complete after 5.703 msecs
  2015. max8903b_resume: resume
  2016. <3>msm_wm8958_setup_power: codec power setup
  2017. <4>8058_s3: Failed to create debugfs directory
  2018. <3>wm8994_ldo_power: Power up the WM8994 LDOs
  2019. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  2020. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  2021. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  2022. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  2023. <6>PM: resume of devices complete after 164.223 msecs
  2024. Restarting tasks ... done.
  2025. <6>PM: suspend exit 2016-10-29 07:08:33.013694226 UTC
  2026. <6>suspend: exit suspend, ret = 0 (2016-10-29 07:08:33.013724725 UTC)
  2027. <4>healthd: battery l=100 v=4104 t=22.0 h=2 st=5 c=314 chg=a
  2028. <6>PM: suspend entry 2016-10-29 07:08:33.068096480 UTC
  2029. Freezing user space processes ... (elapsed 0.005 seconds) done.
  2030. Freezing remaining freezable tasks ... (elapsed 0.002 seconds) done.
  2031. Suspending console(s) (use no_console_suspend to debug)
  2032. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  2033. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  2034. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  2035. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  2036. <3>msm_wm8958_shutdown_power: codec power shutdown
  2037. <3>wm8994_ldo_power: Power down the WM8994 LDOs
  2038. max8903b_suspend: suspend
  2039. <6>PM: suspend of devices complete after 255.753 msecs
  2040. <6>PM: late suspend of devices complete after 5.674 msecs
  2041. <6>active wake lock alarm, time left 475
  2042. <3>dpm_run_callback(): power_suspend_late+0x0/0x58 returns -11
  2043. <3>PM: Device power.0 failed to suspend noirq: error -11
  2044. <6>PM: noirq resume of devices complete after 5.399 msecs
  2045. <6>PM: early resume of devices complete after 5.583 msecs
  2046. <3>PM: Some devices failed to power down
  2047. max8903b_resume: resume
  2048. <3>msm_wm8958_setup_power: codec power setup
  2049. <4>8058_s3: Failed to create debugfs directory
  2050. <3>wm8994_ldo_power: Power up the WM8994 LDOs
  2051. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  2052. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  2053. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  2054. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  2055. <6>PM: resume of devices complete after 164.116 msecs
  2056. Restarting tasks ... done.
  2057. <6>PM: suspend exit 2016-10-29 07:08:33.558489621 UTC
  2058. <6>suspend: exit suspend, ret = -11 (2016-10-29 07:08:33.558489621 UTC)
  2059. <4>healthd: battery l=100 v=4104 t=22.0 h=2 st=5 c=314 chg=a
  2060. <6>PM: suspend entry 2016-10-29 07:08:33.695261152 UTC
  2061. Freezing user space processes ... (elapsed 0.002 seconds) done.
  2062. Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
  2063. Suspending console(s) (use no_console_suspend to debug)
  2064. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  2065. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  2066. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  2067. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  2068. <3>msm_wm8958_shutdown_power: codec power shutdown
  2069. <3>wm8994_ldo_power: Power down the WM8994 LDOs
  2070. max8903b_suspend: suspend
  2071. <6>PM: suspend of devices complete after 224.267 msecs
  2072. <6>PM: late suspend of devices complete after 5.857 msecs
  2073. <6>PM: noirq suspend of devices complete after 7.352 msecs
  2074. Disabling non-boot CPUs ...
  2075. <6>msm_pm_enter
  2076. <6>msm_pm_enter: power collapse
  2077. <6>msm_mpm_irqs_detectable: cannot monitor 0000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000<6>msm_pm_enter: return
  2078. <6>Enabling non-boot CPUs ...
  2079. <6>CPU1 is up
  2080. <6>PM: noirq resume of devices complete after 5.979 msecs
  2081. <6>wakeup wake lock: alarm_rtc
  2082. <6>PM: early resume of devices complete after 5.887 msecs
  2083. max8903b_resume: resume
  2084. <3>msm_wm8958_setup_power: codec power setup
  2085. <4>8058_s3: Failed to create debugfs directory
  2086. <3>wm8994_ldo_power: Power up the WM8994 LDOs
  2087. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  2088. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  2089. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  2090. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  2091. <6>PM: resume of devices complete after 89.597 msecs
  2092. Restarting tasks ... done.
  2093. <6>PM: suspend exit 2016-10-29 07:24:33.020677155 UTC
  2094. <6>suspend: exit suspend, ret = 0 (2016-10-29 07:24:33.020707649 UTC)
  2095. <4>healthd: battery l=100 v=4113 t=22.0 h=2 st=5 c=231 chg=a
  2096. <6>PM: suspend entry 2016-10-29 07:24:33.310878740 UTC
  2097. Freezing user space processes ... (elapsed 0.001 seconds) done.
  2098. Freezing remaining freezable tasks ... (elapsed 0.002 seconds) done.
  2099. Suspending console(s) (use no_console_suspend to debug)
  2100. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  2101. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  2102. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  2103. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  2104. <3>msm_wm8958_shutdown_power: codec power shutdown
  2105. <3>wm8994_ldo_power: Power down the WM8994 LDOs
  2106. max8903b_suspend: suspend
  2107. <6>PM: suspend of devices complete after 252.376 msecs
  2108. <6>PM: late suspend of devices complete after 5.703 msecs
  2109. <6>PM: noirq suspend of devices complete after 7.411 msecs
  2110. Disabling non-boot CPUs ...
  2111. <6>msm_pm_enter
  2112. <6>msm_pm_enter: power collapse
  2113. <6>msm_mpm_irqs_detectable: cannot monitor 0000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000<6>msm_pm_enter: return
  2114. <6>Enabling non-boot CPUs ...
  2115. <6>CPU1 is up
  2116. <6>PM: noirq resume of devices complete after 5.886 msecs
  2117. <6>wakeup wake lock: alarm_rtc
  2118. <6>PM: early resume of devices complete after 5.946 msecs
  2119. max8903b_resume: resume
  2120. <3>msm_wm8958_setup_power: codec power setup
  2121. <4>8058_s3: Failed to create debugfs directory
  2122. <3>wm8994_ldo_power: Power up the WM8994 LDOs
  2123. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  2124. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  2125. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  2126. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  2127. <6>PM: resume of devices complete after 126.924 msecs
  2128. Restarting tasks ... done.
  2129. <6>PM: suspend exit 2016-10-29 07:26:33.018877862 UTC
  2130. <6>suspend: exit suspend, ret = 0 (2016-10-29 07:26:33.018908355 UTC)
  2131. <4>healthd: battery l=100 v=4113 t=22.0 h=2 st=5 c=223 chg=a
  2132. <6>PM: suspend entry 2016-10-29 07:26:33.208232680 UTC
  2133. Freezing user space processes ... (elapsed 0.001 seconds) done.
  2134. Freezing remaining freezable tasks ... (elapsed 0.002 seconds) done.
  2135. Suspending console(s) (use no_console_suspend to debug)
  2136. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  2137. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  2138. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  2139. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  2140. <3>msm_wm8958_shutdown_power: codec power shutdown
  2141. <3>wm8994_ldo_power: Power down the WM8994 LDOs
  2142. max8903b_suspend: suspend
  2143. <6>PM: suspend of devices complete after 233.831 msecs
  2144. <6>PM: late suspend of devices complete after 5.796 msecs
  2145. <6>PM: noirq suspend of devices complete after 7.200 msecs
  2146. Disabling non-boot CPUs ...
  2147. <6>msm_pm_enter
  2148. <6>msm_pm_enter: power collapse
  2149. <6>msm_mpm_irqs_detectable: cannot monitor 0000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000<6>msm_pm_enter: return
  2150. <6>Enabling non-boot CPUs ...
  2151. <6>CPU1 is up
  2152. <6>PM: noirq resume of devices complete after 5.919 msecs
  2153. <6>wakeup wake lock: alarm_rtc
  2154. <6>PM: early resume of devices complete after 5.704 msecs
  2155. max8903b_resume: resume
  2156. <3>msm_wm8958_setup_power: codec power setup
  2157. <4>8058_s3: Failed to create debugfs directory
  2158. <3>wm8994_ldo_power: Power up the WM8994 LDOs
  2159. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  2160. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  2161. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  2162. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  2163. <6>PM: resume of devices complete after 150.071 msecs
  2164. Restarting tasks ... done.
  2165. <6>PM: suspend exit 2016-10-29 07:28:33.013663250 UTC
  2166. <6>suspend: exit suspend, ret = 0 (2016-10-29 07:28:33.013693749 UTC)
  2167. <6>PM: suspend entry 2016-10-29 07:28:33.061051004 UTC
  2168. Freezing user space processes ... (elapsed 0.003 seconds) done.
  2169. Freezing remaining freezable tasks ... (elapsed 0.002 seconds) done.
  2170. Suspending console(s) (use no_console_suspend to debug)
  2171. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  2172. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  2173. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  2174. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  2175. <3>msm_wm8958_shutdown_power: codec power shutdown
  2176. <3>wm8994_ldo_power: Power down the WM8994 LDOs
  2177. max8903b_suspend: suspend
  2178. <6>PM: suspend of devices complete after 213.071 msecs
  2179. <6>PM: late suspend of devices complete after 2.196 msecs
  2180. <6>active wake lock alarm, time left 487
  2181. <3>dpm_run_callback(): power_suspend_late+0x0/0x58 returns -11
  2182. <3>PM: Device power.0 failed to suspend noirq: error -11
  2183. <6>PM: noirq resume of devices complete after 1.677 msecs
  2184. <6>PM: early resume of devices complete after 1.891 msecs
  2185. <3>PM: Some devices failed to power down
  2186. max8903b_resume: resume
  2187. <3>msm_wm8958_setup_power: codec power setup
  2188. <4>8058_s3: Failed to create debugfs directory
  2189. <3>wm8994_ldo_power: Power up the WM8994 LDOs
  2190. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  2191. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  2192. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  2193. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  2194. <6>PM: resume of devices complete after 161.542 msecs
  2195. Restarting tasks ... <4>healthd: battery l=100 v=4113 t=22.0 h=2 st=5 c=214 chg=a
  2196. done.
  2197. <6>PM: suspend exit 2016-10-29 07:28:33.493163830 UTC
  2198. <6>suspend: exit suspend, ret = -11 (2016-10-29 07:28:33.493194341 UTC)
  2199. <4>healthd: battery l=100 v=4113 t=22.0 h=2 st=5 c=214 chg=a
  2200. <6>PM: suspend entry 2016-10-29 07:28:33.634344684 UTC
  2201. Freezing user space processes ... (elapsed 0.001 seconds) done.
  2202. Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
  2203. Suspending console(s) (use no_console_suspend to debug)
  2204. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  2205. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  2206. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  2207. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  2208. <3>msm_wm8958_shutdown_power: codec power shutdown
  2209. <3>wm8994_ldo_power: Power down the WM8994 LDOs
  2210. max8903b_suspend: suspend
  2211. <6>PM: suspend of devices complete after 252.355 msecs
  2212. <6>PM: late suspend of devices complete after 5.674 msecs
  2213. <6>PM: noirq suspend of devices complete after 7.321 msecs
  2214. Disabling non-boot CPUs ...
  2215. <6>msm_pm_enter
  2216. <6>msm_pm_enter: power collapse
  2217. <6>msm_mpm_irqs_detectable: cannot monitor 0000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000<6>msm_pm_enter: return
  2218. <6>Enabling non-boot CPUs ...
  2219. <6>CPU1 is up
  2220. <6>PM: noirq resume of devices complete after 5.887 msecs
  2221. <6>wakeup wake lock: alarm_rtc
  2222. <6>PM: early resume of devices complete after 5.948 msecs
  2223. max8903b_resume: resume
  2224. <3>msm_wm8958_setup_power: codec power setup
  2225. <4>8058_s3: Failed to create debugfs directory
  2226. <3>wm8994_ldo_power: Power up the WM8994 LDOs
  2227. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  2228. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  2229. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  2230. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  2231. <6>PM: resume of devices complete after 85.968 msecs
  2232. Restarting tasks ... done.
  2233. <6>PM: suspend exit 2016-10-29 07:36:33.016408142 UTC
  2234. <6>suspend: exit suspend, ret = 0 (2016-10-29 07:36:33.016408142 UTC)
  2235. <4>healthd: battery l=100 v=4099 t=21.0 h=2 st=5 c=0 chg=a
  2236. <6>PM: suspend entry 2016-10-29 07:36:33.165870427 UTC
  2237. Freezing user space processes ... (elapsed 0.002 seconds) done.
  2238. Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
  2239. Suspending console(s) (use no_console_suspend to debug)
  2240. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  2241. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  2242. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  2243. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  2244. <3>msm_wm8958_shutdown_power: codec power shutdown
  2245. <3>wm8994_ldo_power: Power down the WM8994 LDOs
  2246. max8903b_suspend: suspend
  2247. <6>PM: suspend of devices complete after 249.102 msecs
  2248. <6>PM: late suspend of devices complete after 5.674 msecs
  2249. <6>PM: noirq suspend of devices complete after 7.322 msecs
  2250. Disabling non-boot CPUs ...
  2251. <6>msm_pm_enter
  2252. <6>msm_pm_enter: power collapse
  2253. <6>msm_mpm_irqs_detectable: cannot monitor 0000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000<6>msm_pm_enter: return
  2254. <6>Enabling non-boot CPUs ...
  2255. <6>CPU1 is up
  2256. <6>PM: noirq resume of devices complete after 5.949 msecs
  2257. <6>wakeup wake lock: alarm_rtc
  2258. <6>PM: early resume of devices complete after 5.796 msecs
  2259. max8903b_resume: resume
  2260. <3>msm_wm8958_setup_power: codec power setup
  2261. <4>8058_s3: Failed to create debugfs directory
  2262. <3>wm8994_ldo_power: Power up the WM8994 LDOs
  2263. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  2264. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  2265. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  2266. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  2267. <6>PM: resume of devices complete after 155.409 msecs
  2268. Restarting tasks ... done.
  2269. <6>PM: suspend exit 2016-10-29 07:38:33.014821998 UTC
  2270. <6>suspend: exit suspend, ret = 0 (2016-10-29 07:38:33.014852492 UTC)
  2271. <4>healthd: battery l=100 v=4099 t=21.0 h=2 st=5 c=0 chg=a
  2272. <6>PM: suspend entry 2016-10-29 07:38:33.066082508 UTC
  2273. Freezing user space processes ... (elapsed 0.002 seconds) done.
  2274. Freezing remaining freezable tasks ... (elapsed 0.002 seconds) done.
  2275. Suspending console(s) (use no_console_suspend to debug)
  2276. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  2277. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  2278. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  2279. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  2280. <3>msm_wm8958_shutdown_power: codec power shutdown
  2281. <3>wm8994_ldo_power: Power down the WM8994 LDOs
  2282. max8903b_suspend: suspend
  2283. <6>PM: suspend of devices complete after 212.828 msecs
  2284. <6>PM: late suspend of devices complete after 2.165 msecs
  2285. <6>active wake lock alarm, time left 484
  2286. <3>dpm_run_callback(): power_suspend_late+0x0/0x58 returns -11
  2287. <3>PM: Device power.0 failed to suspend noirq: error -11
  2288. <6>PM: noirq resume of devices complete after 1.677 msecs
  2289. <6>PM: early resume of devices complete after 1.891 msecs
  2290. <3>PM: Some devices failed to power down
  2291. max8903b_resume: resume
  2292. <3>msm_wm8958_setup_power: codec power setup
  2293. <4>8058_s3: Failed to create debugfs directory
  2294. <3>wm8994_ldo_power: Power up the WM8994 LDOs
  2295. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  2296. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  2297. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  2298. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  2299. <6>PM: resume of devices complete after 164.534 msecs
  2300. Restarting tasks ... done.
  2301. <6>PM: suspend exit 2016-10-29 07:38:33.501034976 UTC
  2302. <6>suspend: exit suspend, ret = -11 (2016-10-29 07:38:33.501095998 UTC)
  2303. <4>healthd: battery l=100 v=4099 t=21.0 h=2 st=5 c=0 chg=a
  2304. <6>PM: suspend entry 2016-10-29 07:38:33.651212970 UTC
  2305. Freezing user space processes ... (elapsed 0.001 seconds) done.
  2306. Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
  2307. Suspending console(s) (use no_console_suspend to debug)
  2308. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  2309. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  2310. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  2311. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  2312. <3>msm_wm8958_shutdown_power: codec power shutdown
  2313. <3>wm8994_ldo_power: Power down the WM8994 LDOs
  2314. max8903b_suspend: suspend
  2315. <6>PM: suspend of devices complete after 224.139 msecs
  2316. <6>PM: late suspend of devices complete after 5.857 msecs
  2317. <6>PM: noirq suspend of devices complete after 7.321 msecs
  2318. Disabling non-boot CPUs ...
  2319. <6>msm_pm_enter
  2320. <6>msm_pm_enter: power collapse
  2321. <6>msm_mpm_irqs_detectable: cannot monitor 0000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000<6>msm_pm_enter: return
  2322. <6>Enabling non-boot CPUs ...
  2323. <6>CPU1 is up
  2324. <6>PM: noirq resume of devices complete after 6.009 msecs
  2325. <6>wakeup wake lock: alarm_rtc
  2326. <6>PM: early resume of devices complete after 5.887 msecs
  2327. max8903b_resume: resume
  2328. <3>msm_wm8958_setup_power: codec power setup
  2329. <4>8058_s3: Failed to create debugfs directory
  2330. <3>wm8994_ldo_power: Power up the WM8994 LDOs
  2331. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  2332. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  2333. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  2334. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  2335. <6>PM: resume of devices complete after 89.872 msecs
  2336. Restarting tasks ... done.
  2337. <6>PM: suspend exit 2016-10-29 07:40:34.020767861 UTC
  2338. <6>suspend: exit suspend, ret = 0 (2016-10-29 07:40:34.020798353 UTC)
  2339. <4>healthd: battery l=100 v=4099 t=21.0 h=2 st=5 c=0 chg=a
  2340. <6>PM: suspend entry 2016-10-29 07:40:34.166967787 UTC
  2341. Freezing user space processes ... (elapsed 0.002 seconds) done.
  2342. Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
  2343. Suspending console(s) (use no_console_suspend to debug)
  2344. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  2345. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  2346. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  2347. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  2348. <3>msm_wm8958_shutdown_power: codec power shutdown
  2349. <3>wm8994_ldo_power: Power down the WM8994 LDOs
  2350. max8903b_suspend: suspend
  2351. <6>PM: suspend of devices complete after 225.246 msecs
  2352. <6>PM: late suspend of devices complete after 5.674 msecs
  2353. <6>PM: noirq suspend of devices complete after 7.261 msecs
  2354. Disabling non-boot CPUs ...
  2355. <6>msm_pm_enter
  2356. <6>msm_pm_enter: power collapse
  2357. <6>msm_mpm_irqs_detectable: cannot monitor 0000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000<6>msm_pm_enter: return
  2358. <6>Enabling non-boot CPUs ...
  2359. <6>CPU1 is up
  2360. <6>PM: noirq resume of devices complete after 5.888 msecs
  2361. <6>wakeup wake lock: alarm_rtc
  2362. <6>PM: early resume of devices complete after 5.857 msecs
  2363. max8903b_resume: resume
  2364. <3>msm_wm8958_setup_power: codec power setup
  2365. <4>8058_s3: Failed to create debugfs directory
  2366. <3>wm8994_ldo_power: Power up the WM8994 LDOs
  2367. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  2368. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  2369. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  2370. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  2371. <6>PM: resume of devices complete after 124.057 msecs
  2372. Restarting tasks ... done.
  2373. <6>PM: suspend exit 2016-10-29 07:42:34.015918939 UTC
  2374. <6>suspend: exit suspend, ret = 0 (2016-10-29 07:42:34.015949431 UTC)
  2375. <6>PM: suspend entry 2016-10-29 07:42:34.064769942 UTC
  2376. Freezing user space processes ... (elapsed 0.002 seconds) done.
  2377. Freezing remaining freezable tasks ... (elapsed 0.002 seconds) done.
  2378. Suspending console(s) (use no_console_suspend to debug)
  2379. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  2380. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  2381. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  2382. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  2383. <3>msm_wm8958_shutdown_power: codec power shutdown
  2384. <3>wm8994_ldo_power: Power down the WM8994 LDOs
  2385. max8903b_suspend: suspend
  2386. <6>PM: suspend of devices complete after 252.160 msecs
  2387. <6>PM: late suspend of devices complete after 5.674 msecs
  2388. <6>active wake lock alarm, time left 475
  2389. <3>dpm_run_callback(): power_suspend_late+0x0/0x58 returns -11
  2390. <3>PM: Device power.0 failed to suspend noirq: error -11
  2391. <6>PM: noirq resume of devices complete after 5.217 msecs
  2392. <6>PM: early resume of devices complete after 5.766 msecs
  2393. <3>PM: Some devices failed to power down
  2394. max8903b_resume: resume
  2395. <3>msm_wm8958_setup_power: codec power setup
  2396. <4>8058_s3: Failed to create debugfs directory
  2397. <3>wm8994_ldo_power: Power up the WM8994 LDOs
  2398. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  2399. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  2400. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  2401. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  2402. <6>PM: resume of devices complete after 163.938 msecs
  2403. Restarting tasks ... <4>healthd: battery l=100 v=4099 t=21.0 h=2 st=5 c=0 chg=a
  2404. done.
  2405. <6>PM: suspend exit 2016-10-29 07:42:34.585062406 UTC
  2406. <6>suspend: exit suspend, ret = -11 (2016-10-29 07:42:34.585092919 UTC)
  2407. <4>healthd: battery l=100 v=4099 t=21.0 h=2 st=5 c=0 chg=a
  2408. <6>PM: suspend entry 2016-10-29 07:42:34.758327512 UTC
  2409. Freezing user space processes ... (elapsed 0.005 seconds) done.
  2410. Freezing remaining freezable tasks ... (elapsed 0.002 seconds) done.
  2411. Suspending console(s) (use no_console_suspend to debug)
  2412. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  2413. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  2414. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  2415. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  2416. <3>msm_wm8958_shutdown_power: codec power shutdown
  2417. <3>wm8994_ldo_power: Power down the WM8994 LDOs
  2418. max8903b_suspend: suspend
  2419. <6>PM: suspend of devices complete after 212.963 msecs
  2420. <6>PM: late suspend of devices complete after 2.074 msecs
  2421. <6>PM: noirq suspend of devices complete after 2.715 msecs
  2422. Disabling non-boot CPUs ...
  2423. <6>msm_pm_enter
  2424. <6>msm_pm_enter: power collapse
  2425. <6>msm_mpm_irqs_detectable: cannot monitor 0000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000<6>msm_pm_enter: return
  2426. <6>Enabling non-boot CPUs ...
  2427. <6>CPU1 is up
  2428. <6>PM: noirq resume of devices complete after 5.216 msecs
  2429. <6>wakeup wake lock: alarm_rtc
  2430. <6>PM: early resume of devices complete after 5.154 msecs
  2431. max8903b_resume: resume
  2432. <3>msm_wm8958_setup_power: codec power setup
  2433. <4>8058_s3: Failed to create debugfs directory
  2434. <3>wm8994_ldo_power: Power up the WM8994 LDOs
  2435. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  2436. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  2437. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  2438. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  2439. <6>PM: resume of devices complete after 150.316 msecs
  2440. Restarting tasks ... done.
  2441. <6>PM: suspend exit 2016-10-29 07:48:34.016438540 UTC
  2442. <6>suspend: exit suspend, ret = 0 (2016-10-29 07:48:34.016469034 UTC)
  2443. <4>healthd: battery l=100 v=4099 t=21.0 h=2 st=5 c=0 chg=a
  2444. <6>PM: suspend entry 2016-10-29 07:48:34.068614049 UTC
  2445. Freezing user space processes ... (elapsed 0.002 seconds) done.
  2446. Freezing remaining freezable tasks ... (elapsed 0.002 seconds) done.
  2447. Suspending console(s) (use no_console_suspend to debug)
  2448. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  2449. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  2450. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  2451. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  2452. <3>msm_wm8958_shutdown_power: codec power shutdown
  2453. <3>wm8994_ldo_power: Power down the WM8994 LDOs
  2454. max8903b_suspend: suspend
  2455. <6>PM: suspend of devices complete after 220.117 msecs
  2456. <6>PM: late suspend of devices complete after 2.074 msecs
  2457. <6>PM: noirq suspend of devices complete after 2.776 msecs
  2458. Disabling non-boot CPUs ...
  2459. <6>msm_pm_enter
  2460. <6>msm_pm_enter: power collapse
  2461. <6>msm_mpm_irqs_detectable: cannot monitor 0000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000<6>msm_pm_enter: return
  2462. <6>Enabling non-boot CPUs ...
  2463. <6>CPU1 is up
  2464. <6>PM: noirq resume of devices complete after 3.630 msecs
  2465. <6>wakeup wake lock: alarm_rtc
  2466. <6>PM: early resume of devices complete after 3.629 msecs
  2467. max8903b_resume: resume
  2468. <3>msm_wm8958_setup_power: codec power setup
  2469. <4>8058_s3: Failed to create debugfs directory
  2470. <3>wm8994_ldo_power: Power up the WM8994 LDOs
  2471. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  2472. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  2473. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  2474. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  2475. <6>PM: resume of devices complete after 110.365 msecs
  2476. Restarting tasks ... done.
  2477. <6>PM: suspend exit 2016-10-29 07:50:34.020127155 UTC
  2478. <6>suspend: exit suspend, ret = 0 (2016-10-29 07:50:34.020157647 UTC)
  2479. <4>healthd: battery l=100 v=4104 t=21.0 h=2 st=5 c=0 chg=a
  2480. <6>PM: suspend entry 2016-10-29 07:50:34.162694092 UTC
  2481. Freezing user space processes ... (elapsed 0.002 seconds) done.
  2482. Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
  2483. Suspending console(s) (use no_console_suspend to debug)
  2484. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  2485. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  2486. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  2487. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  2488. <3>msm_wm8958_shutdown_power: codec power shutdown
  2489. <3>wm8994_ldo_power: Power down the WM8994 LDOs
  2490. max8903b_suspend: suspend
  2491. <6>PM: suspend of devices complete after 247.912 msecs
  2492. <6>PM: late suspend of devices complete after 5.766 msecs
  2493. <6>PM: noirq suspend of devices complete after 7.291 msecs
  2494. Disabling non-boot CPUs ...
  2495. <6>msm_pm_enter
  2496. <6>msm_pm_enter: power collapse
  2497. <6>msm_mpm_irqs_detectable: cannot monitor 0000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000<6>msm_pm_enter: return
  2498. <6>Enabling non-boot CPUs ...
  2499. <6>CPU1 is up
  2500. <6>PM: noirq resume of devices complete after 5.949 msecs
  2501. <6>wakeup wake lock: alarm_rtc
  2502. <6>PM: early resume of devices complete after 5.857 msecs
  2503. max8903b_resume: resume
  2504. <3>msm_wm8958_setup_power: codec power setup
  2505. <4>8058_s3: Failed to create debugfs directory
  2506. <3>wm8994_ldo_power: Power up the WM8994 LDOs
  2507. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  2508. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  2509. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  2510. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  2511. <6>PM: resume of devices complete after 89.872 msecs
  2512. Restarting tasks ... done.
  2513. <6>PM: suspend exit 2016-10-29 07:52:34.031075797 UTC
  2514. <6>suspend: exit suspend, ret = 0 (2016-10-29 07:52:34.031106290 UTC)
  2515. <4>healthd: battery l=100 v=4113 t=21.0 h=2 st=5 c=214 chg=a
  2516. <6>PM: suspend entry 2016-10-29 07:52:34.083283666 UTC
  2517. Freezing user space processes ... (elapsed 0.002 seconds) done.
  2518. Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
  2519. Suspending console(s) (use no_console_suspend to debug)
  2520. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  2521. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  2522. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  2523. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  2524. <3>msm_wm8958_shutdown_power: codec power shutdown
  2525. <3>wm8994_ldo_power: Power down the WM8994 LDOs
  2526. max8903b_suspend: suspend
  2527. <6>PM: suspend of devices complete after 235.589 msecs
  2528. <6>PM: late suspend of devices complete after 5.826 msecs
  2529. <6>active wake lock alarm, time left 480
  2530. <3>dpm_run_callback(): power_suspend_late+0x0/0x58 returns -11
  2531. <3>PM: Device power.0 failed to suspend noirq: error -11
  2532. <6>PM: noirq resume of devices complete after 5.094 msecs
  2533. <6>PM: early resume of devices complete after 5.613 msecs
  2534. <3>PM: Some devices failed to power down
  2535. max8903b_resume: resume
  2536. <3>msm_wm8958_setup_power: codec power setup
  2537. <4>8058_s3: Failed to create debugfs directory
  2538. <3>wm8994_ldo_power: Power up the WM8994 LDOs
  2539. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  2540. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  2541. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  2542. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  2543. <6>PM: resume of devices complete after 150.962 msecs
  2544. Restarting tasks ... done.
  2545. <6>PM: suspend exit 2016-10-29 07:52:34.524164943 UTC
  2546. <6>suspend: exit suspend, ret = -11 (2016-10-29 07:52:34.524195455 UTC)
  2547. <4>healthd: battery l=100 v=4113 t=21.0 h=2 st=5 c=213 chg=a
  2548. <6>PM: suspend entry 2016-10-29 07:52:34.696450997 UTC
  2549. Freezing user space processes ... (elapsed 0.002 seconds) done.
  2550. Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
  2551. Suspending console(s) (use no_console_suspend to debug)
  2552. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  2553. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  2554. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  2555. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  2556. <3>msm_wm8958_shutdown_power: codec power shutdown
  2557. <3>wm8994_ldo_power: Power down the WM8994 LDOs
  2558. max8903b_suspend: suspend
  2559. <6>PM: suspend of devices complete after 221.036 msecs
  2560. <6>PM: late suspend of devices complete after 2.104 msecs
  2561. <6>PM: noirq suspend of devices complete after 2.806 msecs
  2562. Disabling non-boot CPUs ...
  2563. <6>msm_pm_enter
  2564. <6>msm_pm_enter: power collapse
  2565. <6>msm_mpm_irqs_detectable: cannot monitor 0000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000<6>msm_pm_enter: return
  2566. <6>Enabling non-boot CPUs ...
  2567. <6>CPU1 is up
  2568. <6>PM: noirq resume of devices complete after 3.630 msecs
  2569. <6>wakeup wake lock: alarm_rtc
  2570. <6>PM: early resume of devices complete after 3.660 msecs
  2571. max8903b_resume: resume
  2572. <3>msm_wm8958_setup_power: codec power setup
  2573. <4>8058_s3: Failed to create debugfs directory
  2574. <3>wm8994_ldo_power: Power up the WM8994 LDOs
  2575. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  2576. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  2577. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  2578. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  2579. <6>PM: resume of devices complete after 133.634 msecs
  2580. Restarting tasks ... done.
  2581. <6>PM: suspend exit 2016-10-29 07:55:51.016895415 UTC
  2582. <6>suspend: exit suspend, ret = 0 (2016-10-29 07:55:51.016925909 UTC)
  2583. <4>healthd: battery l=100 v=4104 t=21.0 h=2 st=5 c=0 chg=a
  2584. <6>PM: suspend entry 2016-10-29 07:55:51.070107385 UTC
  2585. Freezing user space processes ... (elapsed 0.002 seconds) done.
  2586. Freezing remaining freezable tasks ... (elapsed 0.002 seconds) done.
  2587. Suspending console(s) (use no_console_suspend to debug)
  2588. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  2589. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  2590. <3>dpm_run_callback(): platform_pm_suspend+0x0/0x54 returns -16
  2591. <3>PM: Device alarm failed to suspend: error -16
  2592. <3>PM: Some devices failed to suspend
  2593. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  2594. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  2595. <6>PM: resume of devices complete after 3.202 msecs
  2596. Restarting tasks ... done.
  2597. <6>PM: suspend exit 2016-10-29 07:55:51.272796510 UTC
  2598. <6>suspend: exit suspend, ret = -16 (2016-10-29 07:55:51.272796510 UTC)
  2599. <6>PM: suspend entry 2016-10-29 07:55:51.861410338 UTC
  2600. Freezing user space processes ... (elapsed 0.003 seconds) done.
  2601. Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
  2602. Suspending console(s) (use no_console_suspend to debug)
  2603. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  2604. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  2605. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  2606. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  2607. <3>msm_wm8958_shutdown_power: codec power shutdown
  2608. <3>wm8994_ldo_power: Power down the WM8994 LDOs
  2609. max8903b_suspend: suspend
  2610. <6>PM: suspend of devices complete after 226.001 msecs
  2611. <6>PM: late suspend of devices complete after 5.918 msecs
  2612. <6>PM: noirq suspend of devices complete after 7.322 msecs
  2613. Disabling non-boot CPUs ...
  2614. <6>msm_pm_enter
  2615. <6>msm_pm_enter: power collapse
  2616. <6>msm_mpm_irqs_detectable: cannot monitor 0000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000<6>msm_pm_enter: return
  2617. <6>Enabling non-boot CPUs ...
  2618. <6>CPU1 is up
  2619. <6>PM: noirq resume of devices complete after 5.918 msecs
  2620. <6>wakeup wake lock: alarm_rtc
  2621. <6>PM: early resume of devices complete after 5.887 msecs
  2622. max8903b_resume: resume
  2623. <3>msm_wm8958_setup_power: codec power setup
  2624. <4>8058_s3: Failed to create debugfs directory
  2625. <3>wm8994_ldo_power: Power up the WM8994 LDOs
  2626. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  2627. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  2628. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  2629. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  2630. <6>PM: resume of devices complete after 153.365 msecs
  2631. Restarting tasks ... done.
  2632. <6>PM: suspend exit 2016-10-29 07:56:02.023452271 UTC
  2633. <6>suspend: exit suspend, ret = 0 (2016-10-29 07:56:02.023452271 UTC)
  2634. <4>healthd: battery l=100 v=4104 t=21.0 h=2 st=5 c=0 chg=a
  2635. <6>PM: suspend entry 2016-10-29 07:56:02.147449481 UTC
  2636. Freezing user space processes ... (elapsed 0.002 seconds) done.
  2637. Freezing remaining freezable tasks ... (elapsed 0.002 seconds) done.
  2638. Suspending console(s) (use no_console_suspend to debug)
  2639. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  2640. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  2641. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  2642. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  2643. <3>msm_wm8958_shutdown_power: codec power shutdown
  2644. <3>wm8994_ldo_power: Power down the WM8994 LDOs
  2645. max8903b_suspend: suspend
  2646. <6>PM: suspend of devices complete after 218.837 msecs
  2647. <6>PM: late suspend of devices complete after 2.074 msecs
  2648. <6>PM: noirq suspend of devices complete after 2.715 msecs
  2649. Disabling non-boot CPUs ...
  2650. <6>msm_pm_enter
  2651. <6>msm_pm_enter: power collapse
  2652. <6>msm_mpm_irqs_detectable: cannot monitor 0000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000<6>msm_pm_enter: return
  2653. <6>Enabling non-boot CPUs ...
  2654. <6>CPU1 is up
  2655. <6>PM: noirq resume of devices complete after 3.630 msecs
  2656. <6>wakeup wake lock: alarm_rtc
  2657. <6>PM: early resume of devices complete after 3.660 msecs
  2658. max8903b_resume: resume
  2659. <3>msm_wm8958_setup_power: codec power setup
  2660. <4>8058_s3: Failed to create debugfs directory
  2661. <3>wm8994_ldo_power: Power up the WM8994 LDOs
  2662. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  2663. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  2664. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  2665. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  2666. <6>PM: resume of devices complete after 136.379 msecs
  2667. Restarting tasks ... done.
  2668. <6>PM: suspend exit 2016-10-29 07:57:51.014760445 UTC
  2669. <6>suspend: exit suspend, ret = 0 (2016-10-29 07:57:51.014790938 UTC)
  2670. <4>healthd: battery l=100 v=4104 t=21.0 h=2 st=5 c=0 chg=a
  2671. <6>PM: suspend entry 2016-10-29 07:57:51.368687563 UTC
  2672. Freezing user space processes ... (elapsed 0.022 seconds) done.
  2673. Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
  2674. Suspending console(s) (use no_console_suspend to debug)
  2675. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  2676. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  2677. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  2678. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  2679. <3>msm_wm8958_shutdown_power: codec power shutdown
  2680. <3>wm8994_ldo_power: Power down the WM8994 LDOs
  2681. max8903b_suspend: suspend
  2682. <6>PM: suspend of devices complete after 218.301 msecs
  2683. <6>PM: late suspend of devices complete after 2.074 msecs
  2684. <6>PM: noirq suspend of devices complete after 2.745 msecs
  2685. Disabling non-boot CPUs ...
  2686. <6>msm_pm_enter
  2687. <6>msm_pm_enter: power collapse
  2688. <6>msm_mpm_irqs_detectable: cannot monitor 0000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000<6>msm_pm_enter: return
  2689. <6>Enabling non-boot CPUs ...
  2690. <6>CPU1 is up
  2691. <6>PM: noirq resume of devices complete after 3.599 msecs
  2692. <6>wakeup wake lock: alarm_rtc
  2693. <6>PM: early resume of devices complete after 3.628 msecs
  2694. max8903b_resume: resume
  2695. <3>msm_wm8958_setup_power: codec power setup
  2696. <4>8058_s3: Failed to create debugfs directory
  2697. <3>wm8994_ldo_power: Power up the WM8994 LDOs
  2698. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  2699. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  2700. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  2701. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  2702. <6>PM: resume of devices complete after 126.771 msecs
  2703. Restarting tasks ... done.
  2704. <6>PM: suspend exit 2016-10-29 08:00:00.012412080 UTC
  2705. <6>suspend: exit suspend, ret = 0 (2016-10-29 08:00:00.012442572 UTC)
  2706. <6>PM: suspend entry 2016-10-29 08:00:00.060500541 UTC
  2707. Freezing user space processes ... (elapsed 0.002 seconds) done.
  2708. Freezing remaining freezable tasks ... <6>active wake lock alarm, time left 496
  2709.  
  2710. <3>Freezing of tasks aborted after 0.000 seconds (13 tasks refusing to freeze, wq_busy=0):
  2711.  
  2712. Restarting kernel threads ... done.
  2713. Restarting tasks ... <4>healthd: battery l=100 v=4104 t=21.0 h=2 st=5 c=0 chg=a
  2714. done.
  2715. <6>PM: suspend exit 2016-10-29 08:00:00.111432190 UTC
  2716. <6>suspend: exit suspend, ret = -16 (2016-10-29 08:00:00.111493182 UTC)
  2717. <6>PM: suspend entry 2016-10-29 08:00:00.280799137 UTC
  2718. Freezing user space processes ... (elapsed 0.001 seconds) done.
  2719. Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
  2720. Suspending console(s) (use no_console_suspend to debug)
  2721. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  2722. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  2723. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  2724. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  2725. <3>msm_wm8958_shutdown_power: codec power shutdown
  2726. <3>wm8994_ldo_power: Power down the WM8994 LDOs
  2727. max8903b_suspend: suspend
  2728. <6>PM: suspend of devices complete after 238.093 msecs
  2729. <6>PM: late suspend of devices complete after 5.797 msecs
  2730. <6>PM: noirq suspend of devices complete after 7.200 msecs
  2731. Disabling non-boot CPUs ...
  2732. <6>msm_pm_enter
  2733. <6>msm_pm_enter: power collapse
  2734. <6>msm_mpm_irqs_detectable: cannot monitor 0000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000<6>msm_pm_enter: return
  2735. <6>Enabling non-boot CPUs ...
  2736. <6>CPU1 is up
  2737. <6>PM: noirq resume of devices complete after 5.949 msecs
  2738. <6>wakeup wake lock: alarm_rtc
  2739. <6>PM: early resume of devices complete after 5.672 msecs
  2740. max8903b_resume: resume
  2741. <3>msm_wm8958_setup_power: codec power setup
  2742. <4>8058_s3: Failed to create debugfs directory
  2743. <3>wm8994_ldo_power: Power up the WM8994 LDOs
  2744. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  2745. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  2746. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  2747. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  2748. <6>PM: resume of devices complete after 182.646 msecs
  2749. Restarting tasks ... done.
  2750. <6>PM: suspend exit 2016-10-29 08:02:34.012352001 UTC
  2751. <6>suspend: exit suspend, ret = 0 (2016-10-29 08:02:34.012382493 UTC)
  2752. <4>healthd: battery l=100 v=4099 t=21.0 h=2 st=5 c=0 chg=a
  2753. <6>PM: suspend entry 2016-10-29 08:02:34.182400212 UTC
  2754. Freezing user space processes ... (elapsed 0.002 seconds) done.
  2755. Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
  2756. Suspending console(s) (use no_console_suspend to debug)
  2757. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  2758. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  2759. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  2760. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  2761. <3>msm_wm8958_shutdown_power: codec power shutdown
  2762. <3>wm8994_ldo_power: Power down the WM8994 LDOs
  2763. max8903b_suspend: suspend
  2764. <6>PM: suspend of devices complete after 250.693 msecs
  2765. <6>PM: late suspend of devices complete after 5.674 msecs
  2766. <6>PM: noirq suspend of devices complete after 7.322 msecs
  2767. Disabling non-boot CPUs ...
  2768. <6>msm_pm_enter
  2769. <6>msm_pm_enter: power collapse
  2770. <6>msm_mpm_irqs_detectable: cannot monitor 0000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000<6>msm_pm_enter: return
  2771. <6>Enabling non-boot CPUs ...
  2772. <6>CPU1 is up
  2773. <6>PM: noirq resume of devices complete after 5.858 msecs
  2774. <6>wakeup wake lock: alarm_rtc
  2775. <6>PM: early resume of devices complete after 5.826 msecs
  2776. max8903b_resume: resume
  2777. <3>msm_wm8958_setup_power: codec power setup
  2778. <4>8058_s3: Failed to create debugfs directory
  2779. <3>wm8994_ldo_power: Power up the WM8994 LDOs
  2780. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  2781. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  2782. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  2783. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  2784. <6>PM: resume of devices complete after 154.953 msecs
  2785. Restarting tasks ... done.
  2786. <6>PM: suspend exit 2016-10-29 08:04:34.013785131 UTC
  2787. <6>suspend: exit suspend, ret = 0 (2016-10-29 08:04:34.013815629 UTC)
  2788. <4>healthd: battery l=100 v=4099 t=21.0 h=2 st=5 c=0 chg=a
  2789. <6>PM: suspend entry 2016-10-29 08:04:34.067393851 UTC
  2790. Freezing user space processes ... (elapsed 0.002 seconds) done.
  2791. Freezing remaining freezable tasks ... (elapsed 0.002 seconds) done.
  2792. Suspending console(s) (use no_console_suspend to debug)
  2793. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  2794. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  2795. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  2796. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  2797. <3>msm_wm8958_shutdown_power: codec power shutdown
  2798. <3>wm8994_ldo_power: Power down the WM8994 LDOs
  2799. max8903b_suspend: suspend
  2800. <6>PM: suspend of devices complete after 240.528 msecs
  2801. <6>PM: late suspend of devices complete after 5.857 msecs
  2802. <6>active wake lock alarm, time left 483
  2803. <3>dpm_run_callback(): power_suspend_late+0x0/0x58 returns -11
  2804. <3>PM: Device power.0 failed to suspend noirq: error -11
  2805. <6>PM: noirq resume of devices complete after 5.216 msecs
  2806. <6>PM: early resume of devices complete after 6.010 msecs
  2807. <3>PM: Some devices failed to power down
  2808. max8903b_resume: resume
  2809. <3>msm_wm8958_setup_power: codec power setup
  2810. <4>8058_s3: Failed to create debugfs directory
  2811. <3>wm8994_ldo_power: Power up the WM8994 LDOs
  2812. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  2813. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  2814. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  2815. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  2816. <6>PM: resume of devices complete after 155.936 msecs
  2817. Restarting tasks ... done.
  2818. <6>PM: suspend exit 2016-10-29 08:04:34.533255720 UTC
  2819. <6>suspend: exit suspend, ret = -11 (2016-10-29 08:04:34.533286232 UTC)
  2820. <4>healthd: battery l=100 v=4099 t=21.0 h=2 st=5 c=0 chg=a
  2821. <6>PM: suspend entry 2016-10-29 08:04:34.677840729 UTC
  2822. Freezing user space processes ... (elapsed 0.002 seconds) done.
  2823. Freezing remaining freezable tasks ... (elapsed 0.002 seconds) done.
  2824. Suspending console(s) (use no_console_suspend to debug)
  2825. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  2826. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  2827. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  2828. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  2829. <3>msm_wm8958_shutdown_power: codec power shutdown
  2830. <3>wm8994_ldo_power: Power down the WM8994 LDOs
  2831. max8903b_suspend: suspend
  2832. <6>PM: suspend of devices complete after 215.054 msecs
  2833. <6>PM: late suspend of devices complete after 2.074 msecs
  2834. <6>PM: noirq suspend of devices complete after 2.623 msecs
  2835. Disabling non-boot CPUs ...
  2836. <6>msm_pm_enter
  2837. <6>msm_pm_enter: power collapse
  2838. <6>msm_mpm_irqs_detectable: cannot monitor 0000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000<6>msm_pm_enter: return
  2839. <6>Enabling non-boot CPUs ...
  2840. <6>CPU1 is up
  2841. <6>PM: noirq resume of devices complete after 2.105 msecs
  2842. <6>wakeup wake lock: alarm_rtc
  2843. <6>PM: early resume of devices complete after 2.074 msecs
  2844. max8903b_resume: resume
  2845. <3>msm_wm8958_setup_power: codec power setup
  2846. <4>8058_s3: Failed to create debugfs directory
  2847. <3>wm8994_ldo_power: Power up the WM8994 LDOs
  2848. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  2849. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  2850. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  2851. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  2852. <6>PM: resume of devices complete after 148.183 msecs
  2853. Restarting tasks ... done.
  2854. <6>PM: suspend exit 2016-10-29 08:14:35.029488758 UTC
  2855. <6>suspend: exit suspend, ret = 0 (2016-10-29 08:14:35.029519252 UTC)
  2856. <4>healthd: battery l=100 v=4099 t=21.0 h=2 st=5 c=0 chg=a
  2857. <6>PM: suspend entry 2016-10-29 08:14:35.163429842 UTC
  2858. Freezing user space processes ... (elapsed 0.002 seconds) done.
  2859. Freezing remaining freezable tasks ... (elapsed 0.002 seconds) done.
  2860. Suspending console(s) (use no_console_suspend to debug)
  2861. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  2862. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  2863. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  2864. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  2865. <3>msm_wm8958_shutdown_power: codec power shutdown
  2866. <3>wm8994_ldo_power: Power down the WM8994 LDOs
  2867. max8903b_suspend: suspend
  2868. <6>PM: suspend of devices complete after 255.389 msecs
  2869. <6>PM: late suspend of devices complete after 5.674 msecs
  2870. <6>PM: noirq suspend of devices complete after 7.291 msecs
  2871. Disabling non-boot CPUs ...
  2872. <6>msm_pm_enter
  2873. <6>msm_pm_enter: power collapse
  2874. <6>msm_mpm_irqs_detectable: cannot monitor 0000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000<6>msm_pm_enter: return
  2875. <6>Enabling non-boot CPUs ...
  2876. <6>CPU1 is up
  2877. <6>PM: noirq resume of devices complete after 5.858 msecs
  2878. <6>wakeup wake lock: alarm_rtc
  2879. <6>PM: early resume of devices complete after 5.887 msecs
  2880. max8903b_resume: resume
  2881. <3>msm_wm8958_setup_power: codec power setup
  2882. <4>8058_s3: Failed to create debugfs directory
  2883. <3>wm8994_ldo_power: Power up the WM8994 LDOs
  2884. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  2885. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  2886. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  2887. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  2888. <6>PM: resume of devices complete after 99.508 msecs
  2889. Restarting tasks ... done.
  2890. <6>PM: suspend exit 2016-10-29 08:16:35.014942734 UTC
  2891. <6>suspend: exit suspend, ret = 0 (2016-10-29 08:16:35.014973230 UTC)
  2892. <4>healthd: battery l=100 v=4099 t=21.0 h=2 st=5 c=0 chg=a
  2893. <6>PM: suspend entry 2016-10-29 08:16:35.196822489 UTC
  2894. Freezing user space processes ... (elapsed 0.001 seconds) done.
  2895. Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
  2896. Suspending console(s) (use no_console_suspend to debug)
  2897. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  2898. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  2899. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  2900. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  2901. <3>msm_wm8958_shutdown_power: codec power shutdown
  2902. <3>wm8994_ldo_power: Power down the WM8994 LDOs
  2903. max8903b_suspend: suspend
  2904. <6>PM: suspend of devices complete after 224.182 msecs
  2905. <6>PM: late suspend of devices complete after 5.888 msecs
  2906. <6>PM: noirq suspend of devices complete after 7.292 msecs
  2907. Disabling non-boot CPUs ...
  2908. <6>msm_pm_enter
  2909. <6>msm_pm_enter: power collapse
  2910. <6>msm_mpm_irqs_detectable: cannot monitor 0000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000<6>msm_pm_enter: return
  2911. <6>Enabling non-boot CPUs ...
  2912. <6>CPU1 is up
  2913. <6>PM: noirq resume of devices complete after 5.919 msecs
  2914. <6>wakeup wake lock: alarm_rtc
  2915. <6>PM: early resume of devices complete after 5.979 msecs
  2916. max8903b_resume: resume
  2917. <3>msm_wm8958_setup_power: codec power setup
  2918. <4>8058_s3: Failed to create debugfs directory
  2919. <3>wm8994_ldo_power: Power up the WM8994 LDOs
  2920. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  2921. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  2922. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  2923. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  2924. <6>PM: resume of devices complete after 151.903 msecs
  2925. Restarting tasks ... done.
  2926. <6>PM: suspend exit 2016-10-29 08:27:51.019610014 UTC
  2927. <6>suspend: exit suspend, ret = 0 (2016-10-29 08:27:51.019640508 UTC)
  2928. <4>healthd: battery l=100 v=4099 t=21.0 h=2 st=5 c=0 chg=a
  2929. <6>PM: suspend entry 2016-10-29 08:27:51.182217044 UTC
  2930. Freezing user space processes ... (elapsed 0.001 seconds) done.
  2931. Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
  2932. Suspending console(s) (use no_console_suspend to debug)
  2933. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  2934. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  2935. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  2936. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  2937. <3>msm_wm8958_shutdown_power: codec power shutdown
  2938. <3>wm8994_ldo_power: Power down the WM8994 LDOs
  2939. max8903b_suspend: suspend
  2940. <6>PM: suspend of devices complete after 248.039 msecs
  2941. <6>PM: late suspend of devices complete after 5.674 msecs
  2942. <6>PM: noirq suspend of devices complete after 7.383 msecs
  2943. Disabling non-boot CPUs ...
  2944. <6>msm_pm_enter
  2945. <6>msm_pm_enter: power collapse
  2946. <6>msm_mpm_irqs_detectable: cannot monitor 0000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000<6>msm_pm_enter: return
  2947. <6>Enabling non-boot CPUs ...
  2948. <6>CPU1 is up
  2949. <6>PM: noirq resume of devices complete after 5.919 msecs
  2950. <6>wakeup wake lock: alarm_rtc
  2951. <6>PM: early resume of devices complete after 5.826 msecs
  2952. max8903b_resume: resume
  2953. <3>msm_wm8958_setup_power: codec power setup
  2954. <4>8058_s3: Failed to create debugfs directory
  2955. <3>wm8994_ldo_power: Power up the WM8994 LDOs
  2956. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  2957. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  2958. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  2959. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  2960. <6>PM: resume of devices complete after 150.163 msecs
  2961. Restarting tasks ... done.
  2962. <6>PM: suspend exit 2016-10-29 08:29:51.014913583 UTC
  2963. <6>suspend: exit suspend, ret = 0 (2016-10-29 08:29:51.014944081 UTC)
  2964. <4>healthd: battery l=100 v=4099 t=21.0 h=2 st=5 c=0 chg=a
  2965. <6>PM: suspend entry 2016-10-29 08:29:51.067637998 UTC
  2966. Freezing user space processes ... (elapsed 0.002 seconds) done.
  2967. Freezing remaining freezable tasks ... (elapsed 0.002 seconds) done.
  2968. Suspending console(s) (use no_console_suspend to debug)
  2969. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  2970. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  2971. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  2972. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  2973. <3>msm_wm8958_shutdown_power: codec power shutdown
  2974. <3>wm8994_ldo_power: Power down the WM8994 LDOs
  2975. max8903b_suspend: suspend
  2976. <6>PM: suspend of devices complete after 216.003 msecs
  2977. <6>PM: late suspend of devices complete after 2.074 msecs
  2978. <6>active wake lock alarm, time left 485
  2979. <3>dpm_run_callback(): power_suspend_late+0x0/0x58 returns -11
  2980. <3>PM: Device power.0 failed to suspend noirq: error -11
  2981. <6>PM: noirq resume of devices complete after 1.769 msecs
  2982. <6>PM: early resume of devices complete after 2.074 msecs
  2983. <3>PM: Some devices failed to power down
  2984. max8903b_resume: resume
  2985. <3>msm_wm8958_setup_power: codec power setup
  2986. <4>8058_s3: Failed to create debugfs directory
  2987. <3>wm8994_ldo_power: Power up the WM8994 LDOs
  2988. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  2989. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  2990. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  2991. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  2992. <6>PM: resume of devices complete after 167.950 msecs
  2993. Restarting tasks ... done.
  2994. <6>PM: suspend exit 2016-10-29 08:29:51.496763841 UTC
  2995. <6>suspend: exit suspend, ret = -11 (2016-10-29 08:29:51.496794353 UTC)
  2996. <4>healthd: battery l=100 v=4099 t=21.0 h=2 st=5 c=0 chg=a
  2997. <6>PM: suspend entry 2016-10-29 08:29:51.795888126 UTC
  2998. Freezing user space processes ... (elapsed 0.008 seconds) done.
  2999. Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
  3000. Suspending console(s) (use no_console_suspend to debug)
  3001. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  3002. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  3003. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  3004. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  3005. <3>msm_wm8958_shutdown_power: codec power shutdown
  3006. <3>wm8994_ldo_power: Power down the WM8994 LDOs
  3007. max8903b_suspend: suspend
  3008. <6>PM: suspend of devices complete after 252.934 msecs
  3009. <6>PM: late suspend of devices complete after 5.674 msecs
  3010. <6>PM: noirq suspend of devices complete after 7.291 msecs
  3011. Disabling non-boot CPUs ...
  3012. <6>msm_pm_enter
  3013. <6>msm_pm_enter: power collapse
  3014. <6>msm_mpm_irqs_detectable: cannot monitor 0000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000<6>msm_pm_enter: return
  3015. <6>Enabling non-boot CPUs ...
  3016. <6>CPU1 is up
  3017. <6>PM: noirq resume of devices complete after 5.796 msecs
  3018. <6>wakeup wake lock: alarm_rtc
  3019. <6>PM: early resume of devices complete after 5.917 msecs
  3020. max8903b_resume: resume
  3021. <3>msm_wm8958_setup_power: codec power setup
  3022. <4>8058_s3: Failed to create debugfs directory
  3023. <3>wm8994_ldo_power: Power up the WM8994 LDOs
  3024. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  3025. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  3026. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  3027. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  3028. <6>PM: resume of devices complete after 176.666 msecs
  3029. Restarting tasks ... done.
  3030. <6>PM: suspend exit 2016-10-29 08:31:52.018237018 UTC
  3031. <6>suspend: exit suspend, ret = 0 (2016-10-29 08:31:52.018237018 UTC)
  3032. <4>healthd: battery l=100 v=4099 t=21.0 h=2 st=5 c=0 chg=a
  3033. <6>PM: suspend entry 2016-10-29 08:31:52.149034617 UTC
  3034. Freezing user space processes ... (elapsed 0.001 seconds) done.
  3035. Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
  3036. Suspending console(s) (use no_console_suspend to debug)
  3037. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  3038. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  3039. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  3040. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  3041. <3>msm_wm8958_shutdown_power: codec power shutdown
  3042. <3>wm8994_ldo_power: Power down the WM8994 LDOs
  3043. max8903b_suspend: suspend
  3044. <6>PM: suspend of devices complete after 250.171 msecs
  3045. <6>PM: late suspend of devices complete after 5.674 msecs
  3046. <6>PM: noirq suspend of devices complete after 7.353 msecs
  3047. Disabling non-boot CPUs ...
  3048. <6>msm_pm_enter
  3049. <6>msm_pm_enter: power collapse
  3050. <6>msm_mpm_irqs_detectable: cannot monitor 0000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000<6>msm_pm_enter: return
  3051. <6>Enabling non-boot CPUs ...
  3052. <6>CPU1 is up
  3053. <6>PM: noirq resume of devices complete after 5.797 msecs
  3054. <6>wakeup wake lock: alarm_rtc
  3055. <6>PM: early resume of devices complete after 5.826 msecs
  3056. max8903b_resume: resume
  3057. <3>msm_wm8958_setup_power: codec power setup
  3058. <4>8058_s3: Failed to create debugfs directory
  3059. <3>wm8994_ldo_power: Power up the WM8994 LDOs
  3060. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  3061. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  3062. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  3063. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  3064. <6>PM: resume of devices complete after 84.260 msecs
  3065. Restarting tasks ... done.
  3066. <6>PM: suspend exit 2016-10-29 08:39:51.014639389 UTC
  3067. <6>suspend: exit suspend, ret = 0 (2016-10-29 08:39:51.014669884 UTC)
  3068. <6>PM: suspend entry 2016-10-29 08:39:51.060532734 UTC
  3069. Freezing user space processes ... (elapsed 0.001 seconds) done.
  3070. Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
  3071. Suspending console(s) (use no_console_suspend to debug)
  3072. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  3073. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  3074. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  3075. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  3076. <3>msm_wm8958_shutdown_power: codec power shutdown
  3077. <3>wm8994_ldo_power: Power down the WM8994 LDOs
  3078. max8903b_suspend: suspend
  3079. <6>PM: suspend of devices complete after 205.687 msecs
  3080. <6>PM: late suspend of devices complete after 2.226 msecs
  3081. <6>active wake lock alarm, time left 488
  3082. <3>dpm_run_callback(): power_suspend_late+0x0/0x58 returns -11
  3083. <3>PM: Device power.0 failed to suspend noirq: error -11
  3084. <6>PM: noirq resume of devices complete after 1.677 msecs
  3085. <6>PM: early resume of devices complete after 1.891 msecs
  3086. <3>PM: Some devices failed to power down
  3087. max8903b_resume: resume
  3088. <3>msm_wm8958_setup_power: codec power setup
  3089. <4>8058_s3: Failed to create debugfs directory
  3090. <3>wm8994_ldo_power: Power up the WM8994 LDOs
  3091. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  3092. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  3093. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  3094. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  3095. <6>PM: resume of devices complete after 156.599 msecs
  3096. Restarting tasks ... <4>healthd: battery l=100 v=4099 t=21.0 h=2 st=5 c=0 chg=a
  3097. done.
  3098. <6>PM: suspend exit 2016-10-29 08:39:51.465764766 UTC
  3099. <6>suspend: exit suspend, ret = -11 (2016-10-29 08:39:51.465764766 UTC)
  3100. <4>healthd: battery l=100 v=4099 t=21.0 h=2 st=5 c=0 chg=a
  3101. <6>PM: suspend entry 2016-10-29 08:39:51.591260092 UTC
  3102. Freezing user space processes ... (elapsed 0.001 seconds) done.
  3103. Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
  3104. Suspending console(s) (use no_console_suspend to debug)
  3105. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  3106. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  3107. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  3108. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  3109. <3>msm_wm8958_shutdown_power: codec power shutdown
  3110. <3>wm8994_ldo_power: Power down the WM8994 LDOs
  3111. max8903b_suspend: suspend
  3112. <6>PM: suspend of devices complete after 211.820 msecs
  3113. <6>PM: late suspend of devices complete after 2.074 msecs
  3114. <6>PM: noirq suspend of devices complete after 2.623 msecs
  3115. Disabling non-boot CPUs ...
  3116. <6>msm_pm_enter
  3117. <6>msm_pm_enter: power collapse
  3118. <6>msm_mpm_irqs_detectable: cannot monitor 0000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000<6>msm_pm_enter: return
  3119. <6>Enabling non-boot CPUs ...
  3120. <6>CPU1 is up
  3121. <6>PM: noirq resume of devices complete after 2.165 msecs
  3122. <6>wakeup wake lock: alarm_rtc
  3123. <6>PM: early resume of devices complete after 2.043 msecs
  3124. max8903b_resume: resume
  3125. <3>msm_wm8958_setup_power: codec power setup
  3126. <4>8058_s3: Failed to create debugfs directory
  3127. <3>wm8994_ldo_power: Power up the WM8994 LDOs
  3128. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  3129. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  3130. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  3131. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  3132. <6>PM: resume of devices complete after 118.966 msecs
  3133. Restarting tasks ... done.
  3134. <6>PM: suspend exit 2016-10-29 08:41:51.020797764 UTC
  3135. <6>suspend: exit suspend, ret = 0 (2016-10-29 08:41:51.020797764 UTC)
  3136. <4>healthd: battery l=100 v=4099 t=21.0 h=2 st=5 c=0 chg=a
  3137. <6>PM: suspend entry 2016-10-29 08:41:51.168336155 UTC
  3138. Freezing user space processes ... (elapsed 0.001 seconds) done.
  3139. Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
  3140. Suspending console(s) (use no_console_suspend to debug)
  3141. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  3142. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  3143. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  3144. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  3145. <3>msm_wm8958_shutdown_power: codec power shutdown
  3146. <3>wm8994_ldo_power: Power down the WM8994 LDOs
  3147. max8903b_suspend: suspend
  3148. <6>PM: suspend of devices complete after 255.146 msecs
  3149. <6>PM: late suspend of devices complete after 5.674 msecs
  3150. <6>PM: noirq suspend of devices complete after 7.474 msecs
  3151. Disabling non-boot CPUs ...
  3152. <6>msm_pm_enter
  3153. <6>msm_pm_enter: power collapse
  3154. <6>msm_mpm_irqs_detectable: cannot monitor 0000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000<6>msm_pm_enter: return
  3155. <6>Enabling non-boot CPUs ...
  3156. <6>CPU1 is up
  3157. <6>PM: noirq resume of devices complete after 5.858 msecs
  3158. <6>wakeup wake lock: alarm_rtc
  3159. <6>PM: early resume of devices complete after 5.948 msecs
  3160. max8903b_resume: resume
  3161. <3>msm_wm8958_setup_power: codec power setup
  3162. <4>8058_s3: Failed to create debugfs directory
  3163. <3>wm8994_ldo_power: Power up the WM8994 LDOs
  3164. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  3165. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  3166. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  3167. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  3168. <6>PM: resume of devices complete after 151.596 msecs
  3169. Restarting tasks ... done.
  3170. <6>PM: suspend exit 2016-10-29 08:43:51.015523518 UTC
  3171. <6>suspend: exit suspend, ret = 0 (2016-10-29 08:43:51.015554012 UTC)
  3172. <4>healthd: battery l=100 v=4099 t=21.0 h=2 st=5 c=0 chg=a
  3173. <6>PM: suspend entry 2016-10-29 08:43:51.069193353 UTC
  3174. Freezing user space processes ... (elapsed 0.002 seconds) done.
  3175. Freezing remaining freezable tasks ... (elapsed 0.002 seconds) done.
  3176. Suspending console(s) (use no_console_suspend to debug)
  3177. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  3178. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  3179. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  3180. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  3181. <3>msm_wm8958_shutdown_power: codec power shutdown
  3182. <3>wm8994_ldo_power: Power down the WM8994 LDOs
  3183. max8903b_suspend: suspend
  3184. <6>PM: suspend of devices complete after 215.477 msecs
  3185. <6>PM: late suspend of devices complete after 2.104 msecs
  3186. <6>active wake lock alarm, time left 484
  3187. <3>dpm_run_callback(): power_suspend_late+0x0/0x58 returns -11
  3188. <3>PM: Device power.0 failed to suspend noirq: error -11
  3189. <6>PM: noirq resume of devices complete after 1.677 msecs
  3190. <6>PM: early resume of devices complete after 1.921 msecs
  3191. <3>PM: Some devices failed to power down
  3192. max8903b_resume: resume
  3193. <3>msm_wm8958_setup_power: codec power setup
  3194. <4>8058_s3: Failed to create debugfs directory
  3195. <3>wm8994_ldo_power: Power up the WM8994 LDOs
  3196. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  3197. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  3198. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  3199. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  3200. <6>PM: resume of devices complete after 163.988 msecs
  3201. Restarting tasks ... done.
  3202. <6>PM: suspend exit 2016-10-29 08:43:51.498529635 UTC
  3203. <6>suspend: exit suspend, ret = -11 (2016-10-29 08:43:51.498560146 UTC)
  3204. <4>healthd: battery l=100 v=4099 t=21.0 h=2 st=5 c=0 chg=a
  3205. <6>PM: suspend entry 2016-10-29 08:43:51.657974190 UTC
  3206. Freezing user space processes ... (elapsed 0.001 seconds) done.
  3207. Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
  3208. Suspending console(s) (use no_console_suspend to debug)
  3209. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  3210. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  3211. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  3212. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  3213. <3>msm_wm8958_shutdown_power: codec power shutdown
  3214. <3>wm8994_ldo_power: Power down the WM8994 LDOs
  3215. max8903b_suspend: suspend
  3216. <6>PM: suspend of devices complete after 215.543 msecs
  3217. <6>PM: late suspend of devices complete after 2.074 msecs
  3218. <6>PM: noirq suspend of devices complete after 2.776 msecs
  3219. Disabling non-boot CPUs ...
  3220. <6>msm_pm_enter
  3221. <6>msm_pm_enter: power collapse
  3222. <6>msm_mpm_irqs_detectable: cannot monitor 0000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000<6>msm_pm_enter: return
  3223. <6>Enabling non-boot CPUs ...
  3224. <6>CPU1 is up
  3225. <6>PM: noirq resume of devices complete after 5.247 msecs
  3226. <6>wakeup wake lock: alarm_rtc
  3227. <6>PM: early resume of devices complete after 5.154 msecs
  3228. max8903b_resume: resume
  3229. <3>msm_wm8958_setup_power: codec power setup
  3230. <4>8058_s3: Failed to create debugfs directory
  3231. <3>wm8994_ldo_power: Power up the WM8994 LDOs
  3232. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  3233. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  3234. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  3235. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  3236. <6>PM: resume of devices complete after 125.887 msecs
  3237. Restarting tasks ... done.
  3238. <6>PM: suspend exit 2016-10-29 08:54:12.016955139 UTC
  3239. <6>suspend: exit suspend, ret = 0 (2016-10-29 08:54:12.016985632 UTC)
  3240. <4>healthd: battery l=100 v=4094 t=21.0 h=2 st=5 c=0 chg=a
  3241. <6>PM: suspend entry 2016-10-29 08:54:12.192281240 UTC
  3242. Freezing user space processes ... (elapsed 0.001 seconds) done.
  3243. Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
  3244. Suspending console(s) (use no_console_suspend to debug)
  3245. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  3246. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  3247. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  3248. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  3249. <3>msm_wm8958_shutdown_power: codec power shutdown
  3250. <3>wm8994_ldo_power: Power down the WM8994 LDOs
  3251. max8903b_suspend: suspend
  3252. <6>PM: suspend of devices complete after 226.792 msecs
  3253. <6>PM: late suspend of devices complete after 5.827 msecs
  3254. <6>PM: noirq suspend of devices complete after 7.292 msecs
  3255. Disabling non-boot CPUs ...
  3256. <6>msm_pm_enter
  3257. <6>msm_pm_enter: power collapse
  3258. <6>msm_mpm_irqs_detectable: cannot monitor 0000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000<6>msm_pm_enter: return
  3259. <6>Enabling non-boot CPUs ...
  3260. <6>CPU1 is up
  3261. <6>PM: noirq resume of devices complete after 5.858 msecs
  3262. <6>wakeup wake lock: alarm_rtc
  3263. <6>PM: early resume of devices complete after 5.917 msecs
  3264. max8903b_resume: resume
  3265. <3>msm_wm8958_setup_power: codec power setup
  3266. <4>8058_s3: Failed to create debugfs directory
  3267. <3>wm8994_ldo_power: Power up the WM8994 LDOs
  3268. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  3269. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  3270. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  3271. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  3272. <6>PM: resume of devices complete after 174.043 msecs
  3273. Restarting tasks ... done.
  3274. <6>PM: suspend exit 2016-10-29 08:55:50.015920497 UTC
  3275. <6>suspend: exit suspend, ret = 0 (2016-10-29 08:55:50.015950992 UTC)
  3276. <4>healthd: battery l=100 v=4099 t=21.0 h=2 st=5 c=0 chg=a
  3277. <6>PM: suspend entry 2016-10-29 08:55:50.157758114 UTC
  3278. Freezing user space processes ... (elapsed 0.001 seconds) done.
  3279. Freezing remaining freezable tasks ... (elapsed 0.002 seconds) done.
  3280. Suspending console(s) (use no_console_suspend to debug)
  3281. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  3282. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  3283. <3>dpm_run_callback(): platform_pm_suspend+0x0/0x54 returns -16
  3284. <3>PM: Device alarm failed to suspend: error -16
  3285. <3>PM: Some devices failed to suspend
  3286. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  3287. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  3288. <6>PM: resume of devices complete after 3.325 msecs
  3289. Restarting tasks ... done.
  3290. <6>PM: suspend exit 2016-10-29 08:55:50.374601194 UTC
  3291. <6>suspend: exit suspend, ret = -16 (2016-10-29 08:55:50.374601194 UTC)
  3292. <6>PM: suspend entry 2016-10-29 08:55:51.913049216 UTC
  3293. Freezing user space processes ... (elapsed 0.002 seconds) done.
  3294. Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
  3295. Suspending console(s) (use no_console_suspend to debug)
  3296. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  3297. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  3298. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  3299. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  3300. <3>msm_wm8958_shutdown_power: codec power shutdown
  3301. <3>wm8994_ldo_power: Power down the WM8994 LDOs
  3302. max8903b_suspend: suspend
  3303. <6>PM: suspend of devices complete after 219.075 msecs
  3304. <6>PM: late suspend of devices complete after 5.981 msecs
  3305. <6>PM: noirq suspend of devices complete after 7.262 msecs
  3306. Disabling non-boot CPUs ...
  3307. <6>msm_pm_enter
  3308. <6>msm_pm_enter: power collapse
  3309. <6>msm_mpm_irqs_detectable: cannot monitor 0000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000<6>msm_pm_enter: return
  3310. <6>Enabling non-boot CPUs ...
  3311. <6>CPU1 is up
  3312. <6>PM: noirq resume of devices complete after 5.798 msecs
  3313. <6>wakeup wake lock: alarm_rtc
  3314. <6>PM: early resume of devices complete after 5.858 msecs
  3315. max8903b_resume: resume
  3316. <3>msm_wm8958_setup_power: codec power setup
  3317. <4>8058_s3: Failed to create debugfs directory
  3318. <3>wm8994_ldo_power: Power up the WM8994 LDOs
  3319. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  3320. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  3321. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  3322. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  3323. <6>PM: resume of devices complete after 130.219 msecs
  3324. Restarting tasks ... done.
  3325. <6>PM: suspend exit 2016-10-29 08:56:02.024975740 UTC
  3326. <6>suspend: exit suspend, ret = 0 (2016-10-29 08:56:02.025006232 UTC)
  3327. <4>healthd: battery l=100 v=4113 t=21.0 h=2 st=5 c=250 chg=a
  3328. <6>PM: suspend entry 2016-10-29 08:56:02.136682689 UTC
  3329. Freezing user space processes ... (elapsed 0.002 seconds) done.
  3330. Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
  3331. Suspending console(s) (use no_console_suspend to debug)
  3332. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  3333. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  3334. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  3335. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  3336. <3>msm_wm8958_shutdown_power: codec power shutdown
  3337. <3>wm8994_ldo_power: Power down the WM8994 LDOs
  3338. max8903b_suspend: suspend
  3339. <6>PM: suspend of devices complete after 213.914 msecs
  3340. <6>PM: late suspend of devices complete after 2.074 msecs
  3341. <6>PM: noirq suspend of devices complete after 2.745 msecs
  3342. Disabling non-boot CPUs ...
  3343. <6>msm_pm_enter
  3344. <6>msm_pm_enter: power collapse
  3345. <6>msm_mpm_irqs_detectable: cannot monitor 0000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000<6>msm_pm_enter: return
  3346. <6>Enabling non-boot CPUs ...
  3347. <6>CPU1 is up
  3348. <6>PM: noirq resume of devices complete after 2.166 msecs
  3349. <6>wakeup wake lock: alarm_rtc
  3350. <6>PM: early resume of devices complete after 2.044 msecs
  3351. max8903b_resume: resume
  3352. <3>msm_wm8958_setup_power: codec power setup
  3353. <4>8058_s3: Failed to create debugfs directory
  3354. <3>wm8994_ldo_power: Power up the WM8994 LDOs
  3355. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  3356. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  3357. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  3358. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  3359. <6>PM: resume of devices complete after 117.321 msecs
  3360. Restarting tasks ... done.
  3361. <6>PM: suspend exit 2016-10-29 08:56:12.021346791 UTC
  3362. <6>suspend: exit suspend, ret = 0 (2016-10-29 08:56:12.021377283 UTC)
  3363. <4>healthd: battery l=100 v=4113 t=21.0 h=2 st=5 c=241 chg=a
  3364. <6>PM: suspend entry 2016-10-29 08:56:12.226649808 UTC
  3365. Freezing user space processes ... (elapsed 0.001 seconds) done.
  3366. Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
  3367. Suspending console(s) (use no_console_suspend to debug)
  3368. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  3369. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  3370. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  3371. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  3372. <3>msm_wm8958_shutdown_power: codec power shutdown
  3373. <3>wm8994_ldo_power: Power down the WM8994 LDOs
  3374. max8903b_suspend: suspend
  3375. <6>PM: suspend of devices complete after 213.794 msecs
  3376. <6>PM: late suspend of devices complete after 2.074 msecs
  3377. <6>PM: noirq suspend of devices complete after 2.745 msecs
  3378. Disabling non-boot CPUs ...
  3379. <6>msm_pm_enter
  3380. <6>msm_pm_enter: power collapse
  3381. <6>msm_mpm_irqs_detectable: cannot monitor 0000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000<6>msm_pm_enter: return
  3382. <6>Enabling non-boot CPUs ...
  3383. <6>CPU1 is up
  3384. <6>PM: noirq resume of devices complete after 3.752 msecs
  3385. <6>wakeup wake lock: alarm_rtc
  3386. <6>PM: early resume of devices complete after 3.691 msecs
  3387. max8903b_resume: resume
  3388. <3>msm_wm8958_setup_power: codec power setup
  3389. <4>8058_s3: Failed to create debugfs directory
  3390. <3>wm8994_ldo_power: Power up the WM8994 LDOs
  3391. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  3392. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  3393. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  3394. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  3395. <6>PM: resume of devices complete after 107.621 msecs
  3396. Restarting tasks ... done.
  3397. <6>PM: suspend exit 2016-10-29 09:06:12.015735273 UTC
  3398. <6>suspend: exit suspend, ret = 0 (2016-10-29 09:06:12.015765766 UTC)
  3399. <4>healthd: battery l=100 v=4099 t=21.0 h=2 st=5 c=0 chg=a
  3400. <6>PM: suspend entry 2016-10-29 09:06:12.336898612 UTC
  3401. Freezing user space processes ... (elapsed 0.015 seconds) done.
  3402. Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
  3403. Suspending console(s) (use no_console_suspend to debug)
  3404. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  3405. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  3406. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  3407. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  3408. <3>msm_wm8958_shutdown_power: codec power shutdown
  3409. <3>wm8994_ldo_power: Power down the WM8994 LDOs
  3410. max8903b_suspend: suspend
  3411. <6>PM: suspend of devices complete after 226.329 msecs
  3412. <6>PM: late suspend of devices complete after 5.858 msecs
  3413. <6>PM: noirq suspend of devices complete after 7.322 msecs
  3414. Disabling non-boot CPUs ...
  3415. <6>msm_pm_enter
  3416. <6>msm_pm_enter: power collapse
  3417. <6>msm_mpm_irqs_detectable: cannot monitor 0000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000<6>msm_pm_enter: return
  3418. <6>Enabling non-boot CPUs ...
  3419. <6>CPU1 is up
  3420. <6>PM: noirq resume of devices complete after 5.917 msecs
  3421. <6>wakeup wake lock: alarm_rtc
  3422. <6>PM: early resume of devices complete after 5.946 msecs
  3423. max8903b_resume: resume
  3424. <3>msm_wm8958_setup_power: codec power setup
  3425. <4>8058_s3: Failed to create debugfs directory
  3426. <3>wm8994_ldo_power: Power up the WM8994 LDOs
  3427. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  3428. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  3429. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  3430. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  3431. <6>PM: resume of devices complete after 115.427 msecs
  3432. Restarting tasks ... done.
  3433. <6>PM: suspend exit 2016-10-29 09:08:12.012350854 UTC
  3434. <6>suspend: exit suspend, ret = 0 (2016-10-29 09:08:12.012381350 UTC)
  3435. <4>healthd: battery l=100 v=4099 t=21.0 h=2 st=5 c=0 chg=a
  3436. <6>PM: suspend entry 2016-10-29 09:08:12.060866073 UTC
  3437. Freezing user space processes ... (elapsed 0.017 seconds) done.
  3438. Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
  3439. Suspending console(s) (use no_console_suspend to debug)
  3440. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  3441. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  3442. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  3443. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  3444. <3>msm_wm8958_shutdown_power: codec power shutdown
  3445. <3>wm8994_ldo_power: Power down the WM8994 LDOs
  3446. max8903b_suspend: suspend
  3447. <6>PM: suspend of devices complete after 224.663 msecs
  3448. <6>PM: late suspend of devices complete after 5.674 msecs
  3449. <6>active wake lock alarm, time left 487
  3450. <3>dpm_run_callback(): power_suspend_late+0x0/0x58 returns -11
  3451. <3>PM: Device power.0 failed to suspend noirq: error -11
  3452. <6>PM: noirq resume of devices complete after 5.094 msecs
  3453. <6>PM: early resume of devices complete after 5.552 msecs
  3454. <3>PM: Some devices failed to power down
  3455. max8903b_resume: resume
  3456. <3>msm_wm8958_setup_power: codec power setup
  3457. <4>8058_s3: Failed to create debugfs directory
  3458. <3>wm8994_ldo_power: Power up the WM8994 LDOs
  3459. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  3460. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  3461. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  3462. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  3463. <6>PM: resume of devices complete after 168.414 msecs
  3464. Restarting tasks ... done.
  3465. <6>PM: suspend exit 2016-10-29 09:08:12.526876834 UTC
  3466. <6>suspend: exit suspend, ret = -11 (2016-10-29 09:08:12.526907346 UTC)
  3467. <4>healthd: battery l=100 v=4099 t=21.0 h=2 st=5 c=0 chg=a
  3468. <6>PM: suspend entry 2016-10-29 09:08:12.675456006 UTC
  3469. Freezing user space processes ... (elapsed 0.001 seconds) done.
  3470. Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
  3471. Suspending console(s) (use no_console_suspend to debug)
  3472. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  3473. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  3474. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  3475. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  3476. <3>msm_wm8958_shutdown_power: codec power shutdown
  3477. <3>wm8994_ldo_power: Power down the WM8994 LDOs
  3478. max8903b_suspend: suspend
  3479. <6>PM: suspend of devices complete after 232.299 msecs
  3480. <6>PM: late suspend of devices complete after 6.040 msecs
  3481. <6>PM: noirq suspend of devices complete after 7.321 msecs
  3482. Disabling non-boot CPUs ...
  3483. <6>msm_pm_enter
  3484. <6>msm_pm_enter: power collapse
  3485. <6>msm_mpm_irqs_detectable: cannot monitor 0000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000<6>msm_pm_enter: return
  3486. <6>Enabling non-boot CPUs ...
  3487. <6>CPU1 is up
  3488. <6>PM: noirq resume of devices complete after 5.796 msecs
  3489. <6>wakeup wake lock: alarm_rtc
  3490. <6>PM: early resume of devices complete after 5.703 msecs
  3491. max8903b_resume: resume
  3492. <3>msm_wm8958_setup_power: codec power setup
  3493. <4>8058_s3: Failed to create debugfs directory
  3494. <3>wm8994_ldo_power: Power up the WM8994 LDOs
  3495. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  3496. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  3497. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  3498. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  3499. <6>PM: resume of devices complete after 160.381 msecs
  3500. Restarting tasks ... done.
  3501. <6>PM: suspend exit 2016-10-29 09:24:04.016652072 UTC
  3502. <6>suspend: exit suspend, ret = 0 (2016-10-29 09:24:04.016682567 UTC)
  3503. <4>healthd: battery l=100 v=4099 t=21.0 h=2 st=5 c=0 chg=a
  3504. <6>PM: suspend entry 2016-10-29 09:24:04.196247532 UTC
  3505. Freezing user space processes ... (elapsed 0.002 seconds) done.
  3506. Freezing remaining freezable tasks ... (elapsed 0.002 seconds) done.
  3507. Suspending console(s) (use no_console_suspend to debug)
  3508. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  3509. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  3510. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  3511. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  3512. <3>msm_wm8958_shutdown_power: codec power shutdown
  3513. <3>wm8994_ldo_power: Power down the WM8994 LDOs
  3514. max8903b_suspend: suspend
  3515. <6>PM: suspend of devices complete after 228.034 msecs
  3516. <6>PM: late suspend of devices complete after 5.675 msecs
  3517. <6>PM: noirq suspend of devices complete after 7.322 msecs
  3518. Disabling non-boot CPUs ...
  3519. <6>msm_pm_enter
  3520. <6>msm_pm_enter: power collapse
  3521. <6>msm_mpm_irqs_detectable: cannot monitor 0000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000<6>msm_pm_enter: return
  3522. <6>Enabling non-boot CPUs ...
  3523. <6>CPU1 is up
  3524. <6>PM: noirq resume of devices complete after 5.858 msecs
  3525. <6>wakeup wake lock: alarm_rtc
  3526. <6>PM: early resume of devices complete after 5.916 msecs
  3527. max8903b_resume: resume
  3528. <3>msm_wm8958_setup_power: codec power setup
  3529. <4>8058_s3: Failed to create debugfs directory
  3530. <3>wm8994_ldo_power: Power up the WM8994 LDOs
  3531. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  3532. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  3533. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  3534. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  3535. <6>PM: resume of devices complete after 179.808 msecs
  3536. Restarting tasks ... done.
  3537. <6>PM: suspend exit 2016-10-29 09:26:04.016957965 UTC
  3538. <6>suspend: exit suspend, ret = 0 (2016-10-29 09:26:04.016988465 UTC)
  3539. <4>healthd: battery l=100 v=4099 t=21.0 h=2 st=5 c=0 chg=a
  3540. <6>PM: suspend entry 2016-10-29 09:26:04.179655468 UTC
  3541. Freezing user space processes ... (elapsed 0.001 seconds) done.
  3542. Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
  3543. Suspending console(s) (use no_console_suspend to debug)
  3544. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  3545. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  3546. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  3547. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  3548. <3>msm_wm8958_shutdown_power: codec power shutdown
  3549. <3>wm8994_ldo_power: Power down the WM8994 LDOs
  3550. max8903b_suspend: suspend
  3551. <6>PM: suspend of devices complete after 248.738 msecs
  3552. <6>PM: late suspend of devices complete after 5.919 msecs
  3553. <6>PM: noirq suspend of devices complete after 7.292 msecs
  3554. Disabling non-boot CPUs ...
  3555. <6>msm_pm_enter
  3556. <6>msm_pm_enter: power collapse
  3557. <6>msm_mpm_irqs_detectable: cannot monitor 0000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000<6>msm_pm_enter: return
  3558. <6>Enabling non-boot CPUs ...
  3559. <6>CPU1 is up
  3560. <6>PM: noirq resume of devices complete after 5.919 msecs
  3561. <6>wakeup wake lock: alarm_rtc
  3562. <6>PM: early resume of devices complete after 5.888 msecs
  3563. max8903b_resume: resume
  3564. <3>msm_wm8958_setup_power: codec power setup
  3565. <4>8058_s3: Failed to create debugfs directory
  3566. <3>wm8994_ldo_power: Power up the WM8994 LDOs
  3567. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  3568. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  3569. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  3570. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  3571. <6>PM: resume of devices complete after 83.742 msecs
  3572. Restarting tasks ... done.
  3573. <6>PM: suspend exit 2016-10-29 09:28:04.014303943 UTC
  3574. <6>suspend: exit suspend, ret = 0 (2016-10-29 09:28:04.014334442 UTC)
  3575. <4>healthd: battery l=100 v=4099 t=21.0 h=2 st=5 c=0 chg=a
  3576. <6>PM: suspend entry 2016-10-29 09:28:04.060533386 UTC
  3577. Freezing user space processes ... (elapsed 0.001 seconds) done.
  3578. Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
  3579. Suspending console(s) (use no_console_suspend to debug)
  3580. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  3581. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  3582. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  3583. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  3584. <3>msm_wm8958_shutdown_power: codec power shutdown
  3585. <3>wm8994_ldo_power: Power down the WM8994 LDOs
  3586. max8903b_suspend: suspend
  3587. <6>PM: suspend of devices complete after 224.787 msecs
  3588. <6>PM: late suspend of devices complete after 5.857 msecs
  3589. <6>active wake lock alarm, time left 485
  3590. <3>dpm_run_callback(): power_suspend_late+0x0/0x58 returns -11
  3591. <3>PM: Device power.0 failed to suspend noirq: error -11
  3592. <6>PM: noirq resume of devices complete after 5.094 msecs
  3593. <6>PM: early resume of devices complete after 5.582 msecs
  3594. <3>PM: Some devices failed to power down
  3595. max8903b_resume: resume
  3596. <3>msm_wm8958_setup_power: codec power setup
  3597. <4>8058_s3: Failed to create debugfs directory
  3598. <3>wm8994_ldo_power: Power up the WM8994 LDOs
  3599. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  3600. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  3601. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  3602. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  3603. <6>PM: resume of devices complete after 144.488 msecs
  3604. Restarting tasks ... done.
  3605. <6>PM: suspend exit 2016-10-29 09:28:04.484652962 UTC
  3606. <6>suspend: exit suspend, ret = -11 (2016-10-29 09:28:04.485202155 UTC)
  3607. <4>healthd: battery l=100 v=4099 t=21.0 h=2 st=5 c=0 chg=a
  3608. <6>PM: suspend entry 2016-10-29 09:28:04.643103048 UTC
  3609. Freezing user space processes ... (elapsed 0.001 seconds) done.
  3610. Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
  3611. Suspending console(s) (use no_console_suspend to debug)
  3612. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  3613. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  3614. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  3615. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  3616. <3>msm_wm8958_shutdown_power: codec power shutdown
  3617. <3>wm8994_ldo_power: Power down the WM8994 LDOs
  3618. max8903b_suspend: suspend
  3619. <6>PM: suspend of devices complete after 247.505 msecs
  3620. <6>PM: late suspend of devices complete after 5.643 msecs
  3621. <6>PM: noirq suspend of devices complete after 7.352 msecs
  3622. Disabling non-boot CPUs ...
  3623. <6>msm_pm_enter
  3624. <6>msm_pm_enter: power collapse
  3625. <6>msm_mpm_irqs_detectable: cannot monitor 0000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000<6>msm_pm_enter: return
  3626. <6>Enabling non-boot CPUs ...
  3627. <6>CPU1 is up
  3628. <6>PM: noirq resume of devices complete after 5.979 msecs
  3629. <6>wakeup wake lock: alarm_rtc
  3630. <6>PM: early resume of devices complete after 5.825 msecs
  3631. max8903b_resume: resume
  3632. <3>msm_wm8958_setup_power: codec power setup
  3633. <4>8058_s3: Failed to create debugfs directory
  3634. <3>wm8994_ldo_power: Power up the WM8994 LDOs
  3635. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  3636. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  3637. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  3638. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  3639. <6>PM: resume of devices complete after 174.623 msecs
  3640. Restarting tasks ... done.
  3641. <6>PM: suspend exit 2016-10-29 09:36:12.014365279 UTC
  3642. <6>suspend: exit suspend, ret = 0 (2016-10-29 09:36:12.014395771 UTC)
  3643. <4>healthd: battery l=100 v=4099 t=21.0 h=2 st=5 c=0 chg=a
  3644. <6>PM: suspend entry 2016-10-29 09:36:12.168462370 UTC
  3645. Freezing user space processes ... (elapsed 0.001 seconds) done.
  3646. Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
  3647. Suspending console(s) (use no_console_suspend to debug)
  3648. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  3649. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  3650. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  3651. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  3652. <3>msm_wm8958_shutdown_power: codec power shutdown
  3653. <3>wm8994_ldo_power: Power down the WM8994 LDOs
  3654. max8903b_suspend: suspend
  3655. <6>PM: suspend of devices complete after 244.925 msecs
  3656. <6>PM: late suspend of devices complete after 5.918 msecs
  3657. <6>PM: noirq suspend of devices complete after 7.444 msecs
  3658. Disabling non-boot CPUs ...
  3659. <6>msm_pm_enter
  3660. <6>msm_pm_enter: power collapse
  3661. <6>msm_mpm_irqs_detectable: cannot monitor 0000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000<6>msm_pm_enter: return
  3662. <6>Enabling non-boot CPUs ...
  3663. <6>CPU1 is up
  3664. <6>PM: noirq resume of devices complete after 5.949 msecs
  3665. <6>wakeup wake lock: alarm_rtc
  3666. <6>PM: early resume of devices complete after 5.857 msecs
  3667. max8903b_resume: resume
  3668. <3>msm_wm8958_setup_power: codec power setup
  3669. <4>8058_s3: Failed to create debugfs directory
  3670. <3>wm8994_ldo_power: Power up the WM8994 LDOs
  3671. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  3672. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  3673. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  3674. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  3675. <6>PM: resume of devices complete after 89.994 msecs
  3676. Restarting tasks ... done.
  3677. <6>PM: suspend exit 2016-10-29 09:54:11.031319814 UTC
  3678. <6>suspend: exit suspend, ret = 0 (2016-10-29 09:54:11.031350306 UTC)
  3679. <4>healthd: battery l=100 v=4099 t=21.0 h=2 st=5 c=0 chg=a
  3680. <6>PM: suspend entry 2016-10-29 09:54:11.303069390 UTC
  3681. Freezing user space processes ... (elapsed 0.001 seconds) done.
  3682. Freezing remaining freezable tasks ... (elapsed 0.002 seconds) done.
  3683. Suspending console(s) (use no_console_suspend to debug)
  3684. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  3685. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  3686. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  3687. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  3688. <3>msm_wm8958_shutdown_power: codec power shutdown
  3689. <3>wm8994_ldo_power: Power down the WM8994 LDOs
  3690. max8903b_suspend: suspend
  3691. <6>PM: suspend of devices complete after 240.150 msecs
  3692. <6>PM: late suspend of devices complete after 5.767 msecs
  3693. <6>PM: noirq suspend of devices complete after 7.201 msecs
  3694. Disabling non-boot CPUs ...
  3695. <6>msm_pm_enter
  3696. <6>msm_pm_enter: power collapse
  3697. <6>msm_mpm_irqs_detectable: cannot monitor 0000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000<6>msm_pm_enter: return
  3698. <6>Enabling non-boot CPUs ...
  3699. <6>CPU1 is up
  3700. <6>PM: noirq resume of devices complete after 6.100 msecs
  3701. <6>wakeup wake lock: alarm_rtc
  3702. <6>PM: early resume of devices complete after 5.886 msecs
  3703. max8903b_resume: resume
  3704. <3>msm_wm8958_setup_power: codec power setup
  3705. <4>8058_s3: Failed to create debugfs directory
  3706. <3>wm8994_ldo_power: Power up the WM8994 LDOs
  3707. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  3708. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  3709. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  3710. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  3711. <6>PM: resume of devices complete after 106.796 msecs
  3712. Restarting tasks ... done.
  3713. <6>PM: suspend exit 2016-10-29 09:55:52.016132058 UTC
  3714. <6>suspend: exit suspend, ret = 0 (2016-10-29 09:55:52.016162551 UTC)
  3715. <4>healthd: battery l=100 v=4099 t=21.0 h=2 st=5 c=0 chg=a
  3716. <6>PM: suspend entry 2016-10-29 09:55:52.136072658 UTC
  3717. Freezing user space processes ... (elapsed 0.001 seconds) done.
  3718. Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
  3719. Suspending console(s) (use no_console_suspend to debug)
  3720. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  3721. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  3722. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  3723. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  3724. <3>msm_wm8958_shutdown_power: codec power shutdown
  3725. <3>wm8994_ldo_power: Power down the WM8994 LDOs
  3726. max8903b_suspend: suspend
  3727. <6>PM: suspend of devices complete after 239.396 msecs
  3728. <6>PM: late suspend of devices complete after 5.888 msecs
  3729. <6>PM: noirq suspend of devices complete after 7.230 msecs
  3730. Disabling non-boot CPUs ...
  3731. <6>msm_pm_enter
  3732. <6>msm_pm_enter: power collapse
  3733. <6>msm_mpm_irqs_detectable: cannot monitor 0000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000<6>msm_pm_enter: return
  3734. <6>Enabling non-boot CPUs ...
  3735. <6>CPU1 is up
  3736. <6>PM: noirq resume of devices complete after 5.949 msecs
  3737. <6>wakeup wake lock: alarm_rtc
  3738. <6>PM: early resume of devices complete after 5.673 msecs
  3739. max8903b_resume: resume
  3740. <3>msm_wm8958_setup_power: codec power setup
  3741. <4>8058_s3: Failed to create debugfs directory
  3742. <3>wm8994_ldo_power: Power up the WM8994 LDOs
  3743. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  3744. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  3745. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  3746. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  3747. <6>PM: resume of devices complete after 134.609 msecs
  3748. Restarting tasks ... done.
  3749. <6>PM: suspend exit 2016-10-29 09:56:02.016468852 UTC
  3750. <6>suspend: exit suspend, ret = 0 (2016-10-29 09:56:02.016499350 UTC)
  3751. <4>healthd: battery l=100 v=4099 t=21.0 h=2 st=5 c=0 chg=a
  3752. <6>PM: suspend entry 2016-10-29 09:56:02.210520553 UTC
  3753. Freezing user space processes ... (elapsed 0.006 seconds) done.
  3754. Freezing remaining freezable tasks ... (elapsed 0.002 seconds) done.
  3755. Suspending console(s) (use no_console_suspend to debug)
  3756. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  3757. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  3758. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  3759. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  3760. <3>msm_wm8958_shutdown_power: codec power shutdown
  3761. <3>wm8994_ldo_power: Power down the WM8994 LDOs
  3762. max8903b_suspend: suspend
  3763. <6>PM: suspend of devices complete after 254.004 msecs
  3764. <6>PM: late suspend of devices complete after 5.766 msecs
  3765. <6>PM: noirq suspend of devices complete after 7.353 msecs
  3766. Disabling non-boot CPUs ...
  3767. <6>msm_pm_enter
  3768. <6>msm_pm_enter: power collapse
  3769. <6>msm_mpm_irqs_detectable: cannot monitor 0000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000<6>msm_pm_enter: return
  3770. <6>Enabling non-boot CPUs ...
  3771. <6>CPU1 is up
  3772. <6>PM: noirq resume of devices complete after 5.919 msecs
  3773. <6>wakeup wake lock: alarm_rtc
  3774. <6>PM: early resume of devices complete after 5.887 msecs
  3775. max8903b_resume: resume
  3776. <3>msm_wm8958_setup_power: codec power setup
  3777. <4>8058_s3: Failed to create debugfs directory
  3778. <3>wm8994_ldo_power: Power up the WM8994 LDOs
  3779. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  3780. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  3781. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  3782. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  3783. <6>PM: resume of devices complete after 175.141 msecs
  3784. Restarting tasks ... done.
  3785. <6>PM: suspend exit 2016-10-29 09:56:11.013511388 UTC
  3786. <6>suspend: exit suspend, ret = 0 (2016-10-29 09:56:11.013541888 UTC)
  3787. <4>healthd: battery l=100 v=4099 t=21.0 h=2 st=5 c=0 chg=a
  3788. <6>PM: suspend entry 2016-10-29 09:56:11.251119779 UTC
  3789. Freezing user space processes ... (elapsed 0.001 seconds) done.
  3790. Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
  3791. Suspending console(s) (use no_console_suspend to debug)
  3792. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  3793. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  3794. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  3795. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  3796. <3>msm_wm8958_shutdown_power: codec power shutdown
  3797. <3>wm8994_ldo_power: Power down the WM8994 LDOs
  3798. max8903b_suspend: suspend
  3799. <6>PM: suspend of devices complete after 225.237 msecs
  3800. <6>PM: late suspend of devices complete after 5.827 msecs
  3801. <6>PM: noirq suspend of devices complete after 7.292 msecs
  3802. Disabling non-boot CPUs ...
  3803. <6>msm_pm_enter
  3804. <6>msm_pm_enter: power collapse
  3805. <6>msm_mpm_irqs_detectable: cannot monitor 0000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000<6>msm_pm_enter: return
  3806. <6>Enabling non-boot CPUs ...
  3807. <6>CPU1 is up
  3808. <6>PM: noirq resume of devices complete after 5.919 msecs
  3809. <6>wakeup wake lock: gpio_input
  3810. <6>PM: early resume of devices complete after 5.948 msecs
  3811. <6>gpio_keys_scan_keys: key 1-73, 0 (103) changed to 1
  3812. max8903b_resume: resume
  3813. <3>msm_wm8958_setup_power: codec power setup
  3814. <4>8058_s3: Failed to create debugfs directory
  3815. <3>wm8994_ldo_power: Power up the WM8994 LDOs
  3816. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  3817. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  3818. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  3819. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  3820. <6>PM: resume of devices complete after 85.326 msecs
  3821. Restarting tasks ... done.
  3822. <6>PM: suspend exit 2016-10-29 10:05:27.037845040 UTC
  3823. <6>suspend: exit suspend, ret = 0 (2016-10-29 10:05:27.038912286 UTC)
  3824. <4>healthd: battery l=100 v=4099 t=21.0 h=2 st=5 c=0 chg=a
  3825. <6>PM: suspend entry 2016-10-29 10:05:27.084899207 UTC
  3826. Freezing user space processes ... (elapsed 0.001 seconds) done.
  3827. Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
  3828. Suspending console(s) (use no_console_suspend to debug)
  3829. <6>gpio_keys_scan_keys: key 1-73, 0 (103) changed to 0
  3830. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  3831. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  3832. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  3833. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  3834. <3>msm_wm8958_shutdown_power: codec power shutdown
  3835. <3>wm8994_ldo_power: Power down the WM8994 LDOs
  3836. max8903b_suspend: suspend
  3837. <6>PM: suspend of devices complete after 223.472 msecs
  3838. <6>PM: late suspend of devices complete after 5.735 msecs
  3839. <6>PM: noirq suspend of devices complete after 7.443 msecs
  3840. Disabling non-boot CPUs ...
  3841. <6>msm_pm_enter
  3842. <6>msm_pm_enter: power collapse
  3843. <6>msm_mpm_irqs_detectable: cannot monitor 0000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000<6>msm_pm_enter: return
  3844. <6>Enabling non-boot CPUs ...
  3845. <6>CPU1 is up
  3846. <6>PM: noirq resume of devices complete after 5.766 msecs
  3847. <6>wakeup wake lock: event0-448
  3848. <6>PM: early resume of devices complete after 3.507 msecs
  3849. max8903b_resume: resume
  3850. <3>msm_wm8958_setup_power: codec power setup
  3851. <4>8058_s3: Failed to create debugfs directory
  3852. <3>wm8994_ldo_power: Power up the WM8994 LDOs
  3853. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  3854. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  3855. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  3856. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  3857. <6>PM: resume of devices complete after 156.964 msecs
  3858. Restarting tasks ... <6>lsm303dlh_acc_sysfs: hw init start
  3859. <6>lsm303dlh_acc_sysfs: hw init done
  3860. <6>request_suspend_state: wakeup (3->0) at 453869068049 (2016-10-29 10:05:28.022750507 UTC)
  3861. done.
  3862. <6>PM: suspend exit 2016-10-29 10:05:28.032539164 UTC
  3863. <6>suspend: exit suspend, ret = 0 (2016-10-29 10:05:28.032569658 UTC)
  3864. <6>active wake lock mmc1_detect
  3865. <6>active wake lock mmc0_detect
  3866. <6>active wake lock main
  3867. <6>active wake lock PowerManagerService.Display
  3868. <6>active wake lock PowerManagerService.Broadcasts
  3869. <6>active wake lock power-supply
  3870. <38>type=1400 audit(1477735528.060:66): avc: denied { ioctl } for pid=1096 comm="RenderThread" path="/dev/kgsl-3d0" dev="tmpfs" ino=4431 scontext=u:r:platform_app:s0 tcontext=u:object_r:device:s0 tclass=chr_file permissive=1
  3871. <38>type=1400 audit(1477735528.060:67): avc: denied { read write } for pid=1096 comm="RenderThread" path="/dev/kgsl-3d0" dev="tmpfs" ino=4431 scontext=u:r:platform_app:s0 tcontext=u:object_r:device:s0 tclass=chr_file permissive=1
  3872. <4>healthd: battery l=100 v=4099 t=21.0 h=2 st=5 c=0 chg=a
  3873. <38>type=1400 audit(1477735528.070:68): avc: denied { write } for pid=509 comm="Thread-62" name="tsdriver" dev="tmpfs" ino=3435 scontext=u:r:system_server:s0 tcontext=u:object_r:socket_device:s0 tclass=sock_file permissive=1
  3874. <3>[DISP] lcdc_common_panel_power: ++ 1
  3875. <4>mdp4_csc_config: Block type 10 isn't supported by CSC.
  3876. <4>mdp4_csc_config: Block type 8 isn't supported by CSC.
  3877. <6>mdp4_overlay_mdp_perf_upd mdp clk is changed [1] from 0 to 200000000
  3878. <38>type=1400 audit(1477735528.160:69): avc: denied { read write } for pid=150 comm="surfaceflinger" name="msm_rotator" dev="tmpfs" ino=4350 scontext=u:r:surfaceflinger:s0 tcontext=u:object_r:device:s0 tclass=chr_file permissive=1
  3879. <38>type=1400 audit(1477735528.160:70): avc: denied { open } for pid=150 comm="surfaceflinger" name="msm_rotator" dev="tmpfs" ino=4350 scontext=u:r:surfaceflinger:s0 tcontext=u:object_r:device:s0 tclass=chr_file permissive=1
  3880. <3>[DISP] lcdc_tenderloin_panel_set_backlight: 23
  3881. <6>ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
  3882. <6>msm_device_put:device speaker_stereo_rx set 0
  3883. <6>msm_device_put:device speaker_stereo_rx set 1
  3884. <3>msm_device_put:device freq =48000
  3885. <3>Device active
  3886. <4>------------[ cut here ]------------
  3887. <4>WARNING: at /home/flintman/source/ever/loll-5.1/kernel/htc/msm8960/drivers/cpufreq/cpufreq_interactive.c:396 cpufreq_interactive_timer+0xa0/0x3b8()
  3888. [<80014d00>] (unwind_backtrace+0x0/0x11c) from [<80078fa4>] (warn_slowpath_common+0x48/0x60)
  3889. [<80078fa4>] (warn_slowpath_common+0x48/0x60) from [<80079074>] (warn_slowpath_null+0x18/0x1c)
  3890. [<80079074>] (warn_slowpath_null+0x18/0x1c) from [<8049d9c0>] (cpufreq_interactive_timer+0xa0/0x3b8)
  3891. [<8049d9c0>] (cpufreq_interactive_timer+0xa0/0x3b8) from [<8049dd6c>] (cpufreq_interactive_idle_notifier+0x94/0xb0)
  3892. [<8049dd6c>] (cpufreq_interactive_idle_notifier+0x94/0xb0) from [<80097874>] (notifier_call_chain+0x38/0x68)
  3893. [<80097874>] (notifier_call_chain+0x38/0x68) from [<8009794c>] (__atomic_notifier_call_chain+0x34/0x44)
  3894. [<8009794c>] (__atomic_notifier_call_chain+0x34/0x44) from [<80097970>] (atomic_notifier_call_chain+0x14/0x18)
  3895. [<80097970>] (atomic_notifier_call_chain+0x14/0x18) from [<8000f948>] (cpu_idle+0xa4/0xf0)
  3896. [<8000f948>] (cpu_idle+0xa4/0xf0) from [<80693bcc>] (rest_init+0x88/0xa0)
  3897. [<80693bcc>] (rest_init+0x88/0xa0) from [<80913a30>] (start_kernel+0x2c4/0x320)
  3898. <4>---[ end trace 82e935b76acc390b ]---
  3899. <6>msm_device_put:device speaker_stereo_rx set 0
  3900. <7>wlan0: no IPv6 routers present
  3901. <6>msm_device_put:device speaker_stereo_rx set 0
  3902. <6>msm_device_put:device speaker_stereo_rx set 1
  3903. <3>msm_device_put:device freq =48000
  3904. <3>Device active
  3905. <6>msm_device_put:device speaker_stereo_rx set 0
  3906. <6>msm_device_put:device speaker_stereo_rx set 0
  3907. <6>msm_device_put:device speaker_stereo_rx set 1
  3908. <3>msm_device_put:device freq =48000
  3909. <3>Device active
  3910. <6>msm_device_put:device speaker_stereo_rx set 0
  3911. <3>[DISP] lcdc_tenderloin_panel_set_backlight: 24
  3912. <6>msm_device_put:device speaker_stereo_rx set 0
  3913. <6>msm_device_put:device speaker_stereo_rx set 1
  3914. <3>msm_device_put:device freq =48000
  3915. <3>Device active
  3916. <6>msm_device_put:device speaker_stereo_rx set 0
  3917. <6>msm_device_put:device speaker_stereo_rx set 0
  3918. <6>msm_device_put:device speaker_stereo_rx set 1
  3919. <3>msm_device_put:device freq =48000
  3920. <3>Device active
  3921. <3>[DISP] lcdc_tenderloin_panel_set_backlight: 23
  3922. <6>msm_device_put:device speaker_stereo_rx set 0
  3923. <6>msm_device_put:device speaker_stereo_rx set 0
  3924. <6>msm_device_put:device speaker_stereo_rx set 1
  3925. <3>msm_device_put:device freq =48000
  3926. <3>Device active
  3927. <6>msm_device_put:device speaker_stereo_rx set 0
  3928. <6>msm_device_put:device speaker_stereo_rx set 0
  3929. <6>msm_device_put:device speaker_stereo_rx set 1
  3930. <3>msm_device_put:device freq =48000
  3931. <3>Device active
  3932. <6>msm_device_put:device speaker_stereo_rx set 0
  3933. <6>msm_device_put:device speaker_stereo_rx set 0
  3934. <6>msm_device_put:device speaker_stereo_rx set 1
  3935. <3>msm_device_put:device freq =48000
  3936. <3>Device active
  3937. <6>msm_device_put:device speaker_stereo_rx set 0
  3938. <6>msm_device_put:device speaker_stereo_rx set 0
  3939. <6>msm_device_put:device speaker_stereo_rx set 1
  3940. <3>msm_device_put:device freq =48000
  3941. <3>Device active
  3942. <6>msm_device_put:device speaker_stereo_rx set 0
  3943. <6>msm_device_put:device speaker_stereo_rx set 0
  3944. <6>msm_device_put:device speaker_stereo_rx set 1
  3945. <3>msm_device_put:device freq =48000
  3946. <3>Device active
  3947. <6>msm_device_put:device speaker_stereo_rx set 0
  3948. <6>msm_device_put:device speaker_stereo_rx set 0
  3949. <6>msm_device_put:device speaker_stereo_rx set 1
  3950. <3>msm_device_put:device freq =48000
  3951. <3>Device active
  3952. <6>msm_device_put:device speaker_stereo_rx set 0
  3953. <6>msm_device_put:device speaker_stereo_rx set 0
  3954. <6>msm_device_put:device speaker_stereo_rx set 1
  3955. <3>msm_device_put:device freq =48000
  3956. <3>Device active
  3957. <6>msm_device_put:device speaker_stereo_rx set 0
  3958. <6>binder: 448:476 transaction failed 29189, size 152-0
  3959. <38>type=1400 audit(1477735690.257:71): avc: denied { ioctl } for pid=150 comm="surfaceflinger" path="/dev/kgsl-3d0" dev="tmpfs" ino=4431 scontext=u:r:surfaceflinger:s0 tcontext=u:object_r:device:s0 tclass=chr_file permissive=1
  3960. <38>type=1400 audit(1477735701.398:72): avc: denied { read write } for pid=150 comm="surfaceflinger" path="/dev/kgsl-3d0" dev="tmpfs" ino=4431 scontext=u:r:surfaceflinger:s0 tcontext=u:object_r:device:s0 tclass=chr_file permissive=1
  3961. <38>type=1400 audit(1477735701.438:73): avc: denied { ioctl } for pid=2543 comm="RenderThread" path="/dev/kgsl-3d0" dev="tmpfs" ino=4431 scontext=u:r:untrusted_app:s0 tcontext=u:object_r:device:s0 tclass=chr_file permissive=1
  3962. <38>type=1400 audit(1477735720.367:74): avc: denied { ioctl } for pid=1096 comm="RenderThread" path="/dev/kgsl-3d0" dev="tmpfs" ino=4431 scontext=u:r:platform_app:s0 tcontext=u:object_r:device:s0 tclass=chr_file permissive=1
  3963. <6>msm_device_put:device speaker_stereo_rx set 0
  3964. <6>msm_device_put:device speaker_stereo_rx set 1
  3965. <3>msm_device_put:device freq =48000
  3966. <38>type=1400 audit(1477735720.397:75): avc: denied { read write } for pid=1096 comm="RenderThread" path="/dev/kgsl-3d0" dev="tmpfs" ino=4431 scontext=u:r:platform_app:s0 tcontext=u:object_r:device:s0 tclass=chr_file permissive=1
  3967. <3>Device active
  3968. <38>type=1400 audit(1477735722.128:76): avc: denied { read write } for pid=3653 comm="RenderThread" name="kgsl-3d0" dev="tmpfs" ino=4431 scontext=u:r:untrusted_app:s0 tcontext=u:object_r:device:s0 tclass=chr_file permissive=1
  3969. <38>type=1400 audit(1477735722.128:77): avc: denied { open } for pid=3653 comm="RenderThread" name="kgsl-3d0" dev="tmpfs" ino=4431 scontext=u:r:untrusted_app:s0 tcontext=u:object_r:device:s0 tclass=chr_file permissive=1
  3970. <6>msm_vidc_dec: Inside vid_dec_open()<38>type=1400 audit(1477735723.620:78): avc: denied { read write } for pid=446 comm="Binder_1" name="msm_vidc_dec" dev="tmpfs" ino=4352 scontext=u:r:mediaserver:s0 tcontext=u:object_r:device:s0 tclass=chr_file permissive=1
  3971. <38>type=1400 audit(1477735723.620:79): avc: denied { open } for pid=446 comm="Binder_1" name="msm_vidc_dec" dev="tmpfs" ino=4352 scontext=u:r:mediaserver:s0 tcontext=u:object_r:device:s0 tclass=chr_file permissive=1
  3972. <4>
  3973. VIDC: vidc_freq = 200000000, req_perf_lvl = 244800, set_perf_lvl = 244800
  3974. <6>msm_device_put:device speaker_stereo_rx set 0
  3975. <6>fw_version 2:28:2013<38>type=1400 audit(1477735723.650:80): avc: denied { ioctl } for pid=446 comm="Binder_1" path="/dev/msm_vidc_dec" dev="tmpfs" ino=4352 scontext=u:r:mediaserver:s0 tcontext=u:object_r:device:s0 tclass=chr_file permissive=1
  3976. <6>msm_vidc_dec: Inside vid_dec_release()vidc_cleanup_addr_table(): buffer = OUTPUT
  3977. vidc_cleanup_addr_table(): buffer = INPUT
  3978. <6>msm_vidc_dec: Return from vid_dec_release()<6>msm_device_put:device speaker_stereo_rx set 0
  3979. <6>msm_device_put:device speaker_stereo_rx set 1
  3980. <3>msm_device_put:device freq =48000
  3981. <3>Device active
  3982. <6>msm_device_put:device speaker_stereo_rx set 0
  3983. <6>msm_device_put:device speaker_stereo_rx set 0
  3984. <6>msm_device_put:device speaker_stereo_rx set 1
  3985. <3>msm_device_put:device freq =48000
  3986. <3>Device active
  3987. <6>msm_device_put:device speaker_stereo_rx set 0
  3988. <6>msm_device_put:device speaker_stereo_rx set 0
  3989. <6>msm_device_put:device speaker_stereo_rx set 1
  3990. <3>msm_device_put:device freq =48000
  3991. <3>Device active
  3992. <6>msm_device_put:device speaker_stereo_rx set 0
  3993. <6>msm_device_put:device speaker_stereo_rx set 0
  3994. <6>msm_device_put:device speaker_stereo_rx set 1
  3995. <3>msm_device_put:device freq =48000
  3996. <3>Device active
  3997. <6>msm_device_put:device speaker_stereo_rx set 0
  3998. <6>msm_device_put:device speaker_stereo_rx set 0
  3999. <6>msm_device_put:device speaker_stereo_rx set 1
  4000. <3>msm_device_put:device freq =48000
  4001. <3>Device active
  4002. <6>msm_device_put:device speaker_stereo_rx set 0
  4003. <3>[DISP] lcdc_tenderloin_panel_set_backlight: 0
  4004. <3>[DISP] lcdc_common_panel_power: ++ 0
  4005. <38>type=1400 audit(1477735814.118:81): avc: denied { write } for pid=509 comm="Thread-62" name="tsdriver" dev="tmpfs" ino=3435 scontext=u:r:system_server:s0 tcontext=u:object_r:socket_device:s0 tclass=sock_file permissive=1
  4006. <6>request_suspend_state: sleep (0->3) at 739977226730 (2016-10-29 10:10:14.130909188 UTC)
  4007. <6>PM: suspend entry 2016-10-29 10:10:14.140827401 UTC
  4008. Freezing user space processes ... (elapsed 0.001 seconds) done.
  4009. Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
  4010. Suspending console(s) (use no_console_suspend to debug)
  4011. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  4012. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  4013. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  4014. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  4015. <3>msm_wm8958_shutdown_power: codec power shutdown
  4016. <3>wm8994_ldo_power: Power down the WM8994 LDOs
  4017. max8903b_suspend: suspend
  4018. <6>PM: suspend of devices complete after 243.743 msecs
  4019. <6>PM: late suspend of devices complete after 5.920 msecs
  4020. <6>PM: noirq suspend of devices complete after 7.385 msecs
  4021. Disabling non-boot CPUs ...
  4022. <6>msm_pm_enter
  4023. <6>msm_pm_enter: power collapse
  4024. <6>msm_mpm_irqs_detectable: cannot monitor 0000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000<6>msm_pm_enter: return
  4025. <6>Enabling non-boot CPUs ...
  4026. <6>CPU1 is up
  4027. <6>PM: noirq resume of devices complete after 5.889 msecs
  4028. <6>wakeup wake lock: event0-448
  4029. <6>PM: early resume of devices complete after 3.448 msecs
  4030. max8903b_resume: resume
  4031. <3>msm_wm8958_setup_power: codec power setup
  4032. <4>8058_s3: Failed to create debugfs directory
  4033. <3>wm8994_ldo_power: Power up the WM8994 LDOs
  4034. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  4035. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  4036. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  4037. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  4038. <6>PM: resume of devices complete after 88.485 msecs
  4039. Restarting tasks ... done.
  4040. <6>PM: suspend exit 2016-10-29 10:10:15.029487648 UTC
  4041. <6>suspend: exit suspend, ret = 0 (2016-10-29 10:10:15.029579129 UTC)
  4042. <6>active wake lock mmc1_detect
  4043. <6>active wake lock mmc0_detect
  4044. <6>active wake lock PowerManagerService.WakeLocks
  4045. <6>active wake lock KeyEvents
  4046. <6>active wake lock power-supply
  4047. <6>lsm303dlh_acc_sysfs: hw init start
  4048. <6>lsm303dlh_acc_sysfs: hw init done
  4049. <6>request_suspend_state: wakeup (3->0) at 740491825415 (2016-10-29 10:10:15.047387245 UTC)
  4050. <3>[DISP] lcdc_common_panel_power: ++ 1
  4051. <4>healthd: battery l=100 v=4104 t=23.0 h=2 st=5 c=98 chg=a
  4052. <4>mdp4_csc_config: Block type 10 isn't supported by CSC.
  4053. <4>mdp4_csc_config: Block type 8 isn't supported by CSC.
  4054. <6>mdp4_overlay_mdp_perf_upd mdp clk is changed [1] from 0 to 200000000
  4055. <38>type=1400 audit(1477735815.130:82): avc: denied { open } for pid=150 comm="surfaceflinger" name="msm_rotator" dev="tmpfs" ino=4350 scontext=u:r:surfaceflinger:s0 tcontext=u:object_r:device:s0 tclass=chr_file permissive=1
  4056. <3>[DISP] lcdc_tenderloin_panel_set_backlight: 23
  4057. <6>msm_device_put:device speaker_stereo_rx set 0
  4058. <6>msm_device_put:device speaker_stereo_rx set 1
  4059. <3>msm_device_put:device freq =48000
  4060. <3>Device active
  4061. <6>msm_device_put:device speaker_stereo_rx set 0
  4062. <6>SysRq : Emergency Remount R/O
  4063. <3>[DISP] lcdc_tenderloin_panel_set_backlight: 0
  4064. <3>[DISP] lcdc_common_panel_power: ++ 0
  4065. <3>MFD is Null<0>Restarting system with command ''.
  4066. <5>Going down for restart now
  4067. <6>msm_restart: Initiating reboot via bootloader
  4068.  
  4069. Broadcasting: Intent { act=com.evervolv.toolbox.action.DUMPLOGCAT_FINISHED (has extras) }
  4070. Broadcast completed: result=0
  4071.  

Reply to "Logcat: ev_tenderloin-5.1.1-testing-2015.10.02"

Here you can reply to the paste above

Powered by Stikked