Evervolv Paste

Logcat: ev_tenderloin-nightly-2014.08.17

From EVLogcat Uploader, 10 Years ago, written in Plain Text, viewed 699 times.
URL http://paste.evervolv.com/view/609497f2 Embed
Download Paste or View Raw
  1. ------ LAST KMSG (/proc/last_klog) ------
  2. platform_init_mmu_mappings: entry
  3. platform_init_mmu_mappings:57: mapping shared ram as uncached at 0x40000000
  4. platform_init_mmu_mappings: exit
  5. platform_init_timer: entry
  6. platform_init_timer? exit
  7. platform_set_periodic_timer:39: cb 0x4010c6bd, arg 0x0, interval 10
  8. ******************************************
  9. * Welcome to bootie!
  10. *   Version: 468
  11. ******************************************
  12. mmch_init: entry
  13. mmch_init: exit
  14. usbc: initialized (rc=0)
  15. target_init_buttonscan: entry
  16. target_init_board_id: emu=2, product=0x1, hwbuild=1
  17. boardtype=topaz-Wifi-pvt
  18. Memory bank 0 -> address: 0x40200000-0x46700000 size:0x06500000
  19. Memory bank 1 -> address: 0x48000000-0x7ff00000 size:0x37F00000
  20. i2c_init: Register GSBI 3 as i2c bus 0
  21. i2c_init_clock: The i2c clock rate is 19200000
  22. i2c_init: Register GSBI 4 as i2c bus 1
  23. i2c_init_clock: The i2c clock rate is 19200000
  24. i2c_init: Register GSBI 9 as i2c bus 2
  25. i2c_init_clock: The i2c clock rate is 19200000
  26. i2c_init: Register GSBI 8 as i2c bus 3
  27. i2c_init_clock: The i2c clock rate is 19200000
  28. i2c_init: Register GSBI 7 as i2c bus 4
  29. i2c_init_clock: The i2c clock rate is 19200000
  30. a6_init_sbw_pins: TCK: 157, TDIO; 158, WKUP: 155
  31. max8903b_gpio_init
  32. Starting battery authentication...
  33. Battery auth succeeded
  34. sys_init: entry
  35. Wall message(Boot reason) = 0x6f656d99 ("crash")
  36. {ys_init: booted because 'crash'
  37. mmch_reset: entry
  38. Bus(0) Primecell ID regs:
  39. 0x80 0x11 0x4 0x0
  40. 0xd 0xf0 0x5 0xb1
  41. sdc1_clk_set 400000
  42. mmch_set_active:727: bus 0, active 1
  43. sdc1_clk_set 400000
  44. mmch_reset: exit
  45. mmch_set_active:727: bus 0, active 1
  46. sdc1_clk_set 400000
  47. cid: 0x2010053 0x454d3136 0x47901217 0xb6196e42
  48.         mfg id: 0x2
  49.         oem id: 0x100
  50.         name: 'SEM16G'
  51.         rev: 0x90
  52.         sn: 0x1217b619
  53.         date: 6.2011
  54. sdc1_clk_set 50000000
  55. token section is 10240 bytes long
  56. target_check_boot_condition: entry
  57. Wall message(Boot reason) = 0x6f656d99 ("crash")
  58. display_init: displayWidth: 1024, displayHeight: 768
  59. Wall message(Boot reason) = 0x6f656d99 ("crash")
  60. p=94 ca=4456000 v=4167520 i=156
  61. autobooting with 'fsboot' command
  62. loading file '/boot/uImage' to address 0x41000000
  63. parse_uimage:241: uimage 0x41000000
  64. <6>[    0.000000] Booting Linux on physical CPU 0
  65. <6>[    0.000000] Initializing cgroup subsys cpu
  66. <5>[    0.000000] Linux version 3.4.82-tenderloin+ (ev_nightlies@evervolv.codefi.re) (gcc version 4.7 (GCC) ) #1 SMP PREEMPT Sun Aug 17 06:30:51 PDT 2014
  67. <1>[    0.000000] CPU: ARMv7 Processor [510f02d2] revision 2 (ARMv7), cr=10c5387d
  68. <1>[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIVT ASID tagged instruction cache
  69. <1>[    0.000000] Machine: tenderloin
  70. <6>[    0.000000] memory pool 3 (start 76400000 size 9200000) initialized
  71. <1>[    0.000000] Memory policy: ECC disabled, Data cache writealloc
  72. <3>[    0.000000] smem_find(137, 80): wrong size 64
  73. <3>[    0.000000] smem_find(137, 72): wrong size 64
  74. <6>[    0.000000] socinfo_init: v5, id=86, ver=2.0, raw_id=1696, raw_ver=1696, hw_plat=0,  hw_plat_ver=65536
  75. <6>[    0.000000]  accessory_chip=0
  76. <7>[    0.000000] On node 0 totalpages: 215296
  77. <7>[    0.000000] free_area_init_node: node 0, pgdat 809c0600, node_mem_map 80c54000
  78. <7>[    0.000000]   Normal zone: 2024 pages used for memmap
  79. <7>[    0.000000]   Normal zone: 0 pages reserved
  80. <7>[    0.000000]   Normal zone: 213272 pages, LIFO batch:31
  81. <6>[    0.000000] passing from bootie 9437184 bytes at 7f600000 physical for fb
  82. <6>[    0.000000] PERCPU: Embedded 6 pages/cpu @81449000 s12096 r0 d12480 u32768
  83. <7>[    0.000000] pcpu-alloc: s12096 r0 d12480 u32768 alloc=8*4096
  84. <7>[    0.000000] pcpu-alloc: [0] 0 [0] 1
  85. <1>[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 213272
  86. <5>[    0.000000] Kernel command line: root=/dev/ram0 rootwait ro fbcon=disable console=ttyS0,115200n8 androidboot.serialno=B1AGU899G617MV8FDL94GRHSHF26B90L  fb=0x7f600000 nduid=b2828e15a40d4836f3a7da6220774e1f903b218a klog=0x7ff00000 klog_len=0x100000 boardtype=topaz-Wifi-pvt lastboot=crash
  87. <6>[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
  88. <6>[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  89. <6>[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  90. <6>[    0.000000] Memory: 101MB 740MB = 841MB total
  91. <5>[    0.000000] Memory: 839364k/839364k available, 171324k reserved, 0K highmem
  92. <5>[    0.000000] Virtual kernel memory layout:
  93. <5>[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
  94. <5>[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
  95. <5>[    0.000000]     vmalloc : 0xbf800000 - 0xff000000   (1016 MB)
  96. <5>[    0.000000]     lowmem  : 0x80000000 - 0xbf400000   (1012 MB)
  97. <5>[    0.000000]     pkmap   : 0x7fe00000 - 0x80000000   (   2 MB)
  98. <5>[    0.000000]       .text : 0x80008000 - 0x808d1b3c   (8999 kB)
  99. <5>[    0.000000]       .init : 0x808d2000 - 0x80915f40   ( 272 kB)
  100. <5>[    0.000000]       .data : 0x80916000 - 0x809df4b0   ( 806 kB)
  101. <5>[    0.000000]        .bss : 0x809df4d4 - 0x80c4f8e8   (2498 kB)
  102. <6>[    0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
  103. <6>[    0.000000] Preemptible hierarchical RCU implementation.
  104. <6>[    0.000000] NR_IRQS:855
  105. <6>[    0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms
  106. <6>[    0.000000] Switching to timer-based delay loop
  107. <7>[    0.000000] ODEBUG: 2 of 2 active objects replaced
  108. <6>[    0.001892] Calibrating delay loop (skipped), value calculated using timer frequency.. 13.50 BogoMIPS (lpj=67500)
  109. <6>[    0.001953] pid_max: default: 32768 minimum: 301
  110. <6>[    0.002227] Security Framework initialized
  111. <6>[    0.002288] SELinux:  Initializing.
  112. <7>[    0.002349] SELinux:  Starting in permissive mode
  113. <6>[    0.002502] Mount-cache hash table entries: 512
  114. <6>[    0.004241] Initializing cgroup subsys cpuacct
  115. <6>[    0.004272] Initializing cgroup subsys freezer
  116. <6>[    0.004333] CPU: Testing write buffer coherency: ok
  117. <6>[    0.004669] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  118. <6>[    0.004699] hw perfevents: enabled with ARMv7 Scorpion-MP PMU driver, 5 counterr available
  119. <6>[    0.004821] Setting up static identity map for 0x408800c8 - 0x4088012c
  120. <6>[    0.036804] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  121. <6>[    0.036956] Brought up 2 CPUs
  122. <6>[    0.036987] SMP: Total of 2 processors activated (27.00 BogoMIPS).
  123. <6>[    0.056976] dummy:
  124. <6>[    0.057586] NET: Registered protocol family 16
  125. <6>[    0.058624] DMA: preallocated 256 KiB pool for atomic coherent allocations
  126. <3>[    0.058837] AXI: msm_bus_fabric_init_driver(): msm_bus_fabric_init_driver
  127. <6>[    0.060180] meminfo_init: smem ram ptable found: ver: 0 len: 7
  128. <6>[    0.060211] Found 2 memory banks grouped into 16 memory regions
  129. <6>[    0.060546] gpiochip_add: registered GPIOs 0 to 172 on device: msmgpio
  130. <6>[    0.061614] msm_tsens_early_init: done
  131. <6>[    0.061676] msm_rpm_init: RPM firmware 2.0.67653
  132. <1>[    0.061828] Choosing tenderloin_pins_wifi
  133. <3>[    0.093994] msm_rpm_get_status(): Status id 433 not defined for target
  134. <3>[    0.123535] tenderloin_init_gpiomux: >= TOPAZ_DVT
  135. <6>[    0.124938] saw_probe: id=0, name=8901_s0
  136. <6>[    0.125549] saw_probe: id=1, name=8901_s1
  137. <6>[    0.132873] pm8058_probe: PMIC revision: E3
  138. <6>[    0.135162] gpiochip_add: registered GPIOs 173 to 212 on device: pm-gpio
  139. <6>[    0.135589] pm_gpio_probe: OK: base=173, ngpio=40
  140. <6>[    0.135986] gpiochip_add: registered GPIOs 213 to 224 on device: pm8xxx-mpp
  141. <6>[    0.136047] pm8xxx_mpp_probe: OK: base=213, ngpio=12
  142. <6>[    0.139038] pm8901_probe: PMIC revision reg: F4
  143. <6>[    0.139038] pm8901_probe: PMIC version: PM8901 rev 2.1
  144. <6>[    0.140014] gpiochip_add: registered GPIOs 225 to 228 on device: pm8xxx-mpp
  145. <6>[    0.140075] pm8xxx_mpp_probe: OK: base=225, ngpio=4
  146. <3>[    0.145446] Registering a6_0 device.
  147. <3>[    0.145507] Registering a6_1 device.
  148. <7>[    0.147064] tenderloin_init_keypad
  149. <3>[    0.147369] tenderloin_init: --
  150. <6>[    0.147430] hw-breakpoint: found 3 (+1 reserved) breakpoint and 1 watchpoint registers.
  151. <6>[    0.147460] hw-breakpoint: maximum watchpoint size is 8 bytes.
  152. <6>[    0.191528] bio: create slab <bio-0> at 0
  153. <7>[    0.193023] reg-fixed-voltage reg-fixed-voltage.0: vdd50_boost supplying 5000000uV
  154. <6>[    0.195190] ION heap vmalloc created
  155. <6>[    0.195312] ION heap mm created at 38200000 with size 6600000
  156. <6>[    0.195343] ION heap mm_fw created at 38000000 with size 200000
  157. <6>[    0.195465] ION heap mfc created at 3e800000 with size 2000
  158. <6>[    0.195709] ION heap sf created at 76401000 with size 4000000
  159. <6>[    0.195983] ION heap camera_preview created at 7a401000 with size 4200000
  160. <6>[    0.196075] ION heap audio created at 7e601000 with size 4cf000
  161. <5>[    0.196350] pmic8058_pwm_probe: OK
  162. <6>[    0.196502] klog_init: phys buffer at 0x7ff00000
  163. <6>[    0.196594] klog_init: virt address at 0xbfe00000
  164. <6>[    0.196594] klog_init: found valid klog, len 1048576
  165. <6>klog_init: using buffer 1 at 0xbfe40018, length 262116
  166. <6>klog_init: last_klog head=62610 tail=62611 size=262115
  167. <6>klog_init: last_klog2 head=0 tail=0 size=0
  168. <6>klog_init: last_klog3 head=0 tail=0 size=0
  169. <5>SCSI subsystem initialized
  170. <6>usbcore: registered new interface driver usbfs
  171. <6>usbcore: registered new interface driver hub
  172. <6>usbcore: registered new device driver usb
  173. <6>input: pmic8xxx_pwrkey as /devices/platform/msm_ssbi.0/pm8058-core/pm8xxx-pwrkey/input/input0
  174. <6>Advanced Linux Sound Architecture Driver Version 1.0.25.
  175. <6>Bluetooth: Core ver 2.16
  176. <6>NET: Registered protocol family 31
  177. <6>Bluet?oth: HCI device and connection manager initialized
  178. <6>Bluetooth: HCI socket layer initialized
  179. <6>Bluetooth: L2CAP socket layer initialized
  180. <6>Bluetooth: SCO socket layer initialized
  181. <6>cfg80211: Calling CRDA to update world regulatory domain
  182. <6>Switching to clocksource gp_timer
  183. <6>NET: Registered protocol family 2
  184. <6>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
  185. <6>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
  186. <6>TCP bind hash table entries: 65536 (order: 8, 1310720 bytes)
  187. <6>TCP: Hash tables configured (established 131072 bind 65536)
  188. <6>TCP: reno registered
  189. <6>UDP hash table entries: 512 (order: 2, 24576 bytes)
  190. <6>UDP-Lite hash table entries: 512 (order: 2, 24576 bytes)
  191. <6>NET: Registered protocol family 1
  192. <6>RPC: Registered named UNIX socket transport module.
  193. <6>RPC: Registered udp transport module.
  194. <6>RPC: Registered tcp transport module.
  195. <6>RPC: Registered tcp NFSv4.1 backchannel transport module.
  196. <6>Trying to unpack rootfs image as initramfs...
  197. <6>Freeing initrd memory: 376K
  198. <6>Detected 5 counters on the L2CC PMU.
  199. <6>pil_qdsp6v3 pil_qdsp6v3: using non-secure boot
  200. <3>smd_channel_probe_worker: allocation table not initialized
  201. <6>snddev_icodec_probe: msm_codec_i2s_slave_mode = 0
  202. <4>8058_s4: Failed to create debugfs directory
  203. <6>dspcrashd_probe: Platform driver values: Base = 0x46700000, Size = 0x2000000,pdata = 0xdeaddead
  204. <6>Max ACPU freq: 1512000 KHz
  205. <4>8901_s0: Failed to create debugfs directory
  206. <4>8901_s1: Failed to create debugfs directory
  207. <6>CPU0: 23 scaling frequencies supported.
  208. <6>CPU1: 23 scaling frequencies supported.
  209. <6>audit: initializing netlink socket (disabled)
  210. <5>type=2000 audit(0.240:1): initialized
  211. <6>NTFS driver 2.1.30 [Flags: R/W].
  212. <6>fuse init (API version 7.18)
  213. <6>msgmni has been set to 1640
  214. <7>SELinux:  Registering netfilter hooks
  215. <6>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
  216. <6>io scheduler noop registered
  217. <6>io scheduler deadline registered
  218. <6>io scheduler row registered (default)
  219. <6>io scheduler cfq registered
  220. <6>
  221.  msm_vidc_enc: Inside vid_enc_init()<6>
  222.  msm_vidc_enc: Inside vid_enc_vcd_init()<6>msm_serial_hs module loaded
  223. <6>[BT]msm_serial_hs module loaded
  224. <6>msm_serial_hsl: detected port #0
  225. <6>msm_serial_hsl.0: ttyHSL0 at MMIO 0x19c40000 (irq = 227) is a MSM
  226. <6>msm_serial_hsl: driver initialized
  227. <6>msm_rotator_probe: rotator_hw_revision=1
  228. <6>kgsl kgsl-3d0: |kgsl_gpummu_init| MMU type set for device is GPUMMU
  229. <6>kgsl kgsl-2d0: |kgsl_gpummu_init| MMU type set for device is GPUMMU
  230. <6>kgsl kgsl-2d1: |kgsl_gpummu_init| MMU type set for device is GPUMMU
  231. <6>brd: module loaded
  232. <6>loop: module loaded
  233. <6>lkdtm: No crash points registered, enable through debugfs
  234. <6>pmem: Initializing pmem_adsp as non-cached
  235. <3>pmem: Cannot allocate from reserved memory for pmem_adsp
  236. <4>android_pmem: probe of android_pmem.2 failed with error -1
  237. <6>pmem: Initializing pmem_audio as non-cached
  238. <6>allocating 5042176 bytes at 7ead0000 physical for pmem_audio
  239. <4>8058_l18: Failed to create debugfs directory
  240. <6>Before a6 call to i2c_add_driver.
  241. <3>a6_init_state: enabling A6 internal wake.
  242. <3>a6_init_state: TS2_I2C_WAKEUP_PERIOD = 0x1b
  243. <6>A6 Version: HW: 255, FW (M.m.B): 2.13.25, ManID: 28769, ProdTyp: 1281
  244. <5>A6 driver initialized successfully!
  245. <3>a6_init_state: enabling A6 internal wake.
  246. <3>a6_init_state: TS2_I2C_WAKEUP_PERIOD = 0x1b
  247. <6>A6 Version: HW: 255, FW (M.m.B): 2.7.29, ManID: 28769, ProdTyp: 1793
  248. <5>A6 driver initialized successfully!
  249. <4>i2c-core: driver [a6] using legacy suspend method
  250. <4>i2c-core: driver [a6] using legacy resume method
  251. <6>nduid: b2828e15a40d4836f3a7da6220774e1f903b218a
  252. <3>jsuart_rxtx_lists_init: init 80b3eae4
  253. <3>hsuart_rxtx_lists_init: init 80b3eb18
  254. hsuart_tty:created 'ttyHS0' device on UART 0
  255. mdmgpio_init
  256. mdmgpio_probe
  257. <3>msm_wm8958_setup_power: codec power setup
  258. <4>vdd50_boost: Failed to create debugfs directory
  259. <4>8058_s3: Failed to create debugfs directory
  260. <3>wm8994_ldo_power: Power up the WM8994 LDOs
  261. <6>wm8994 4-001a: WM8958 revision B
  262. <4>wm8994 4-001a: No interrupt specified, no interrupts
  263. <7>gpiochip_find_base: found new base at 501
  264. <6>gpiochip_add: registered GPIOs 501 to 511 on device: wm8994
  265. <6>SCSI Media Changer driver v0.25
  266. <6>tun: Universal TUN/TAP device driver, 1.6
  267. <6>tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  268. <6>PPP generic driver version 2.4.2
  269. <6>PPP BSD Compression module registered
  270. <6>PPP Deflate Compression module registered
  271. <6>PPP MPPE Compression module registered
  272. <6>NET: Registered protocol family 24
  273. <6>SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
  274. <6>CSLIP: code copyright 1989 Regents of the University of California.
  275. <3>board_sdio_wifi_enable
  276. <4>8058_s3: Failed to create debugfs directory
  277. <4>8901_l3: Failed to create debugfs directory
  278. <4>8901_l1: Failed to create debugfs directory
  279. <4>8058_l19: Failed to create debugfs directory
  280. <6>wifi_power(1) 1.8V sdio: set load
  281. <6>tenderloin_wifi_power: New regulator mode for 8058_s3: 2
  282. <6>wifi_power(1) 3.3V
  283. <6>wifi_power(1) 8901_l1 3.3V
  284. <6>wifi_power(1) 8058_l19 1.8V
  285. wifi_power(1) CHIP_PWD
  286. <4>8058_s1: Failed to create debugfs directory
  287. <4>8058_l6: Failed to create debugfs directory
  288. <4>8058_l7: Failed to create debugfs directory
  289. <6>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  290. <3>Rate 2147483647 for jpegd_clk is greater than highest Fmax
  291. <6>host driver registered w/ tranceiver
  292. <6>usbcore: registered new interface driver cdc_acm
  293. <6>cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
  294. <6>usbcore: registered new interface driver cdc_wdm
  295. <6>Initializing USB Mass Storage driver...
  296. <6>usbcore: registered new interface driver usb-storage
  297. <6>USB Mass Storage support registered.
  298. <6>usbcore: registered new interface driver ums-alauda
  299. <6>usbcore: registered new interface driver ums-cypress
  300. <6>usbcore: registered new interface driver ums-datafab
  301. <6>usbcore: registered new interface driver ums-freecom
  302. <6>usbcore: registered new interface driver ums-isd200
  303. <6>usbcore: registered new interface driver ums-jumpshot
  304. <6>usbcore: registered new interface driver ums-karma
  305. <6>usbcore: registered new interface driver ums-onetouch
  306. <6>usbcore: registered new interface driver ums-sddr09
  307. <6>usbcore: registered new interface driver ums-sddr55
  308. <6>usbcore: registered new interface driver ums-usbat
  309. <6>usbcore: registered new interface driver usbserial
  310. <6>usbserial: USB Serial Driver core
  311. <6>usbcore: registered new interface driver usb_ehset_test
  312. <6>peripheral driver registered w/ tranceiver
  313. <6>mbim_init: initialize 1 instances
  314. <6>mbim_init: Initialized 1 ports
  315. <6>rndis_qc_init: initialize rndis QC instance
  316. <6>android_usb gadget: Mass Storage Function, version: 2009/09/11
  317. <6>android_usb gadget: Number of LUNs=1
  318. <6> lun0: LUN: removable file: (no medium)
  319. <6>android_usb gadget: android_usb ready
  320. <4>8058_l10: Failed to create debugfs directory
  321. <4>vdd50_boost: Failed to create debugfs directory
  322. <6>GPIO Input Driver: Start gpio inputs for tenderloin-keypad in interrupt mode
  323. <6>input: tenderloin-keypad as /devices/virtual/input/input1
  324. <6>i2c i2c-0: mpu3050: +lsm303dlha
  325. <6>i2c i2c-0: mpu3050: +lsm303dlhm
  326. <4>i2c i2c-0: WARNING: Compass irq not assigned
  327. <4>i2c i2c-0: mpu3050: No Pressure Present
  328. <4>ODEBUG: object is on stack, but not annotated
  329. <4>------------[ cut here ]------------
  330. <4>WARNING: at ../../../../../../kernel/htc/msm8960/lib/debugobjects.c:302 __debug_object_init+0x2b0/0x36c()
  331. [<80014c60>] (unwind_backtrace+0x0/0x11c) from [<80078188>] (warn_slowpath_common+0x48/0x60)
  332. [<80078188>] (warn_slowpath_common+0x48/0x60) from [<80078258>] (warn_slowpath_null+0x18/0x1c)
  333. [<80078258>] (warn_slowpath_null+0x18/0x1c) from [<8027be10>] (__debug_object_init+0x2b0/0x36c)
  334. [<8027be10>] (__debug_object_init+0x2b0/0x36c) from [<80095758>] (hrtimer_init+0x18/0x30)
  335. [<80095758>] (hrtimer_init+0x18/0x30) from [<80082ae4>] (do_nsleep+0x2c/0xf0)
  336. [<80082ae4>] (do_nsleep+0x2c/0xf0) from [<80083f84>] (hr_msleep+0x14/0x1c)
  337. [<80083f84>] (hr_msleep+0x14/0x1c) from [<8041032c>] (MLDLPowerMgmtMPU+0x19c/0x4c4)
  338. [<8041032c>] (MLDLPowerMgmtMPU+0x19c/0x4c4) from [<80411b20>] (mpu3050_open+0xa4/0x4bc)
  339. [<80411b20>] (mpu3050_open+0xa4/0x4bc) from [<8040e45c>] (mpu3050_probe+0x3a0/0x6c8)
  340. [<8040e45c>] (mpu3050_probe+0x3a0/0x6c8) from [<8041b784>] (i2c_device_probe+0x98/0xc8)
  341. [<8041b784>] (i2c_device_probe+0x98/0xc8) from [<8031f228>] (driver_probe_device+0x138/0x33c)
  342. [<8031f228>] (driver_probe_device+0x138/0x33c) from [<8031f494>] (__driver_attach+0x68/0x8c)
  343. [<8031f494>] (__driver_attach+0x68/0x8c) from [<8031d9d8>] (bus_for_each_dev+0x50/0x88)
  344. [<8031d9d8>] (bus_for_each_dev+0x50/0x88) from [<8031e1a0>] (bus_add_driver+0xf0/0x25c)
  345. [<8031e1a0>] (bus_add_driver+0xf0/0x25c) from [<8031fc54>] (driver_register+0x9c/0x120)
  346. [<8031fc54>] (driv?r_register+0x9c/0x120) from [<8041c54c>] (i2c_register_driver+0xac/0xd8)
  347. [<8041c54c>] (i2c_register_driver+0xac/0xd8) from [<808f5264>] (mpu_init+0x10/0x60)
  348. [<808f5264>] (mpu_init+0x10/0x60) from [<808d2b04>] (do_one_initcall+0x90/0x160)
  349. [<808d2b04>] (do_one_initcall+0x90/0x160) from [<808d2cc8>] (kernel_init+0xf4/0x1b8)
  350. [<808d2cc8>] (kernel_init+0xf4/0x1b8) from [<8000f5f4>] (kernel_thread_exit+0x0/0x8)
  351. <4>---[ end trace ac6fb694cd47dbac ]---
  352. <6>gpio_keys_scan_keys: key 1-73, 0 (103) changed to 0
  353. <6>gpio_keys_scan_keys: key 1-72, 1 (104) changed to 0
  354. <6>gpio_keys_scan_keys: key 1-ac, 2 (40) changed to 0
  355. <6>i2c i2c-0: Installing irq using 381
  356. <6>i2c i2c-0: Module Param interface = mpuirq
  357. <4>i2c-core: driver [mpu3050] using legacy suspend method
  358. <4>i2k-core: driver [mpu3050] using legacy resume method
  359. <7>mpu_init
  360. <6><6>lsm303dlh magnetometer driver
  361. <3>lsm303dlh_mag_sysfs: probe start
  362. <6>input: lsm303dlh_mag_sysfs as /devices/i2c-0/0-001e/input/input2
  363. <6>lsm303dlh_mag_sysfs 0-001e: lsm303dlh_mag probed
  364. <7>lsm303dlh_acc_sysfs accelerometer driver: init
  365. <6>lsm303dlh_acc_sysfs: probe start.
  366. <6>lsm303dlh_acc_sysfs: hw init start
  367. <3>ulpi_read: timeout 48300000
  368. <6>lsm303dlh_acc_sysfs: hw init done
  369. <6>input: lsm303dlh_acc_sysfs as /devices/i2c-0/0-0018/input/input3
  370. <6>lsm303dlh_acc_sysfs 0-0018: lsm303dlh_acc_sysfs: probed
  371. <4>i2c-core: driver [lsm303dlh_acc_sysfs] using legacy suspend method
  372. <4>i2c-core: driver [lsm303dlh_acc_sysfs] using legacy resume method
  373. <4>------------[ cut here ]------------
  374. <4>WARNING: at ../../../../../../kernel/htc/msm8960/lib/debugobjects.c:262 debug_print_object+0x94/0xbc()
  375. <3>ODEBUG: assert_init not available (active state 0) object type: timer_list hint: stub_timer+0x0/0x10
  376. [<80014c60>] (unwind_backtrace+0x0/0x11c) from [<80078188>] (warn_slowpath_common+0x48/0x60)
  377. [<80078188>] (warn_slowpath_common+0x48/0x60) from [<800781f8>] (warn_slowpath_fmt+0x2c/0x3c)
  378. [<800781f8>] (warn_slowpath_fmt+0x2c/0x3c) from [<8027ba80>] (debug_print_object+0x94/0xbc)
  379. [<8027ba80>] (debug_print_object+0x94/0xbc) from [<8027c3b4>] (debug_object_assert_init+0xac/0xd4)
  380. [<8027c3b4>] (debug_object_assert_init+0xac/0xd4) from [<800837c8>] (del_timer+0x14/0xb4)
  381. [<800837c8>] (del_timer+0x14/0xb4) from [<8008cda0>] (__cancel_work_timer+0x20/0x10c)
  382. [<8008cda0>] (__cancel_work_timer+0x20/0x10c) from [<80415cf0>] (isl29023_set_power_state+0x70/0x78)
  383. [<80415cf0>] (isl29023_set_power_state+0x70/0x78) from [<8066f72c>] (isl29023_probe+0x188/0x370)
  384. [<8066f72c>] (isl29023_probe+0x188/0x370) from [<8041b784>] (i2c_device_probe+0x98/0xc8)
  385. [<8041b784>] (i2c_device_probe+0x98/0xc8) from [<8031f228>] (driver_probe_device+0x138/0x33c)
  386. [<8031f228>] (driver_probe_device+0x138/0x33c) from [<8031f494>] (__driver_attach+0x68/0x8c)
  387. [<8031f494>] (__driver_attach+0x68/0x8c) from [<8031d9d8>] (bus_for_each_dev+0x50/0x88)
  388. [<8031d9d8>] (bus_for_each_dev+0x50/0x88) from [<8031e1a0>] (bus_add_driver+0xf0/0x25c)
  389. [<8031e1a0>] (bus_add_driver+0xf0/0x25c) from [<8031fc54>] (driver_register+0x9c/0x120)
  390. [<8031fc54>] (driver_register+0x9c/0x120) from [<8041c54c>] (i2c_register_driver+0xac/0xd8)
  391. [<8041c54c>] (i2c_register_driver+0xac/0xd8) from [<808d2b04>] (do_one_initcall+0x90/0x160)
  392. [<808d2b04>] (do_one_initcall+0x90/0x160) from [<808d2cc8>] (kernel_init+0xf4/0x1b8)
  393. [<808d2cc8>] (kernel_init+0xf4/0x1b8) from [<8000f5f4>_ (kernel_thread_exit+0x0/0x8)
  394. <4>---[ end trace ac6fb694cd47dbad ]---
  395. <6>input: isl29023 light sensor as /devices/virtual/input/input4
  396. isl29023 input_dev success
  397. <6>isl29023 0-0044: driver version 1.0 enabled
  398. <4>i2c-core: driver [isl29023] using legacy suspend method
  399. <4>i2c-core: driver [isl29023] using legacy resume method
  400. <6>using rtc device, pm8xxx_rtc, for alarms<6>rtc-pm8xxx rtc-pm8xxx: rtc core: registered pm8xxx_rtc as rtc0
  401. <6>i2c /dev entries driver
  402. <6>lirc_dev: IR Remote Control driver registered, major 240
  403. <6>IR RC5 (streamzap) protocol handler initialized
  404. <6>IR SANYO protocol handler initialized
  405. <6>IR MCE Keyboard/mouse protocol handler initialized
  406. <6>IR LIRC bridge handler initialized
  407. <6>Linux video capture interface: v2.00
  408. +++ config_camera_on_gpios_web_cam_mt9m113
  409. <4>8058_lvs0: Failed to create debugfs directory
  410. config_camera_on_gpios_web_cam_mt9m113:enable the regulator votg_lvs0 succeed
  411. <4>8058_l11: Failed to create debugfs directory
  412. config_camera_on_gpios_web_cam_mt9m113:enable the regulator votg_vreg_l11 succeed
  413. --- config_camera_on_gpios_web_cam_mt9m113
  414. <4>fs_vfe: Failed to create debugfs directory
  415. <3>ulpi_read: timeout 48300000
  416. +++ config_camera_off_gpios_web_cam_mt9m113
  417. config_camera_off_gpios_web_cam_mt9m113:disable the regulator: votg_lvs0 succeed
  418. config_camera_off_gpios_web_cam_mt9m113:disable the regulator: votg_vreg_l11 succeed
  419. --- config_camera_off_gpios_web_cam_mt9m113
  420. <6>msm_sync_init: initialized mt9m113
  421. <6>max8903b driver registeration! rc = 0
  422. <6>msm_adc successfully registered
  423. <5>tsens_tm_init: OK
  424. <6>device-mapper: uevent: version 1.0.3
  425. <6>device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
  426. <6>device-mapper: multipath: version 1.3.0 loaded
  427. <6>device-mapper: multipath round-robin: version 1.0.0 loaded
  428. <6>device-mapper: multipath queue-length: version 0.1?0 loaded
  429. <6>device-mapper: multipath service-time: version 0.2.0 loaded
  430. <6>cpuidle: using governor ladder
  431. <6>cpuidle: using governor menu
  432. <6>mmc0: SDCC Version: 0x00000000
  433. <3>mmc0: No card detect facilities available
  434. <4>8901_l5: Failed to create debugfs directory
  435. <4>8901_lvs0: Failed to create debugfs directory
  436. <6>mmc0: Qualcomm MSM SDCC-core at 0x0000000012400000 irq 136,0 dma 18 dmacrcri 1
  437. <6>mmc0: Controller capabilities: 0x00000001
  438. <6>mmc0: 8 bit data mode enabled
  439. <6>mmc0: 4 bit data mode disabled
  440. <6>mmc0: polling status mode disabled
  441. <6>mmc0: MMC clock 400000 -> 48000000 Hz, PCLK 0 Hz
  442. <6>mmc0: Slot eject status = 0
  443. <6>mmc0: Power save feature enable = 1
  444. <6>mmc0: DM non-cached buffer at bf8e6000, dma_addr 0x74840000
  445. <6>mmc0: DM cmd busaddr 0x74840000, cmdptr busaddr 0x74857f40
  446. <6>mmc1: SDCC Version: 0x00000000
  447. <3>mmc1: No card detect facilities available
  448. <4>8058_s3: Failed to create debugfs directory
  449. <6>mmc1: Qualcomm MSM SDCC-core at 0x00000000121c0000 irq 133,0 dma 21 dmacrcri 5
  450. <6>mmc1: Controller capabilities: 0x00000001
  451. <6>mmc1: 8 bit data mode disabled
  452. <6>mmc1: 4 bit data mode enabled
  453. <6>mmc1: polling status mode disabled
  454. <6>mmc1: MMC clock 400000 -> 48000000 Hz, PCLK 0 Hz
  455. <6>mmc1: Slot eject status = 0
  456. <6>mmc1: Power save feature enable = 1
  457. <6>mmc1: DM non-cached buffer at bfb01000, dma_addr 0x74860000
  458. <6>mmc1: DM cmd busaddr 0x74860000, cmdptr busaddr 0x74877f40
  459. tenderloin_probe_wifi: id 4 mmc b4638000
  460. <3>board_sdio_wifi_enable
  461. <7>LM8502 module init called
  462. <7>LM8502 probe called
  463. <3>ulpi_read: timeout 48300000
  464. <3>ulpi_read: timeout 48300000
  465. <6>mmc0: disabling BKOPS
  466. <6>mmc0: new high speed MMC card at address 0001
  467. <6>mmcblk0: mmc0:0001 SEM16G 14.8 GiB
  468. <6> mmcblk0: p1 p2 p3 p4 < p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 >
  469. <3>qup_i2c qup_i2c.3: QUP: I2C status flags :0x1343c8, irq:193
  470. <3>qup_i2c qup_i2c.3: I2C slave addr:0x33 not connected
  471. <3>Unable to read LM8502 registers
  472. <7>Registered led device: core_navi_left
  473. <7>Registered led device: core_navi_right
  474. <4>i2c-core: driver [LM8502] using legacy suspend method
  475. <4>i2c-core: driver [LM8502] using legacy resume method
  476. <6>usbcore: registered new interface driver usbhid
  477. <6>usbhid: USB HID core driver
  478. <6>ashmem: initialized
  479. <6>logger: created 256K log 'log_main'
  480. <6>logger: created 256K log 'log_events'
  481. <6>logger: created 256K log 'log_radio'
  482. <6>logger: created 256K log 'log_system'
  483. <6>msm-cpu-dai msm-cpu-dai.0: asoc_msm_cpu_probe: dev name msm-cpu-dai.0
  484. <6>msm-codec-dai msm-codec-dai.0: asoc_msm_codec_probe: dev name msm-codec-dai.0
  485. <6>msm-dsp-audio msm-dsp-audio.0: msm_pcm_probe: dev name msm-dsp-audio.0
  486. <3>msm_wm8958_shutdown_power: codec power shutdown
  487. <4>vdd50_boost: Failed to create debugfs directory
  488. <3>wm8994_ldo_`ower: Power down the WM8994 LDOs
  489. <6>asoc: wm8994-aif1 <-> msm-cpu-dai.0 mapping ok
  490. <6>asoc: wm8994-aif2 <-> msm-cpu-dai.0 mapping ok
  491. <6>input: msm-audio headset as /devices/platform/soc-audio/sound/card0/input5
  492. <6>GACT probability NOT on
  493. <6>Mirror/redirect action on
  494. Failed to load ipt action
  495. <6>u32 classifier
  496. <6>    Performance counters on
  497. <6>    input device check on
  498. <6>    Actions configured
  499. <6>Netfilter messages via NETLINK v0.30.
  500. <6>nf_conntrack version 0.5.0 (13120 buckets, 52480 max)
  501. <6>ctnetlink v0.93: registering with nfnetlink.
  502. <6>NF_TPROXY: Transparent proxy support initialized, version 4.1.0
  503. <6>NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
  504. <6>xtOtime: kernel timezone is -0000
  505. <6>ip_tables: (C) 2000-2006 Netfilter Core Team
  506. <6>arp_tables: (C) 2002 David S. Miller
  507. <6>TCP: cubic registered
  508. <6>NET: Registered protocol family 10
  509. <6>Mobile IPv6
  510. <6>ip6_tables: (C) 2000-2006 Netfilter Core Team
  511. <6>IPv6 over IPv4 tunneling driver
  512. <6>NET: Registered protocol family 17
  513. <6>NET: Registered protocol family 15
  514. <6>Bluetooth: RFCOMM TTY layer initialized
  515. <6>Bluetooth: RFCOMM socket layer initialized
  516. <6>Bluetooth: RFCOMM ver 1.11
  517. <6>Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  518. <6>Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  519. <6>L2TP core driver, V2.0
  520. <6>PPPoL2TP kernel driver, V2.0
  521. <6>L2TP IP encapsulation support (L2TPv3)
  522. <6>L2TP netlink interface
  523. <6>L2TP ethernet pseudowire support (L2TPv3)
  524. <3>lcdc_tenderloin_panel_init: +++++++++++++++++++++++
  525. <3>lcdc_tenderloin_probe: ++
  526. <6>Lcdc_tenderloin_probe: bl_pwm0=b5bddc00 LPG_chan0=0
  527. <6>setting pdata->panel_info.fb_num to 3. type: 3
  528. <4>------------[ cut here ]------------
  529. <4>WARNING: at ../../../../../../kernel/htc/msm8960/arch/arm/mach-msm/clock-local.c:424 rcg_clk_prepare+0x2c/0x48()
  530. Attempting to prepare pixel_mdp_clk before setting its rate. Set the rate first!
  531. [<80014c60>] (unwind_backtrace+0x0/0x11c) from [<80078188>] (warn_slowpath_common+0x48/0x60)
  532. [<80078188>] (warn_slowpath_common+0x48/0x60) from [<800781f8>] (warn_slowpath_fmt+0x2c/0x3c)
  533. [<800781f8>] (warn_slowpath_fmt+0x2c/0x3c) from [<80059c40>] (rcg_clk_prepare+0x2c/0x48)
  534. [<80059c40>] (rcg_clk_prepare+0x2c/0x48) from [<800208b8>] (clk_prepare+0x94/0xe0)
  535. [<800208b8>] (clk_prepare+0x94/0xe0) from [<802ab490>] (cont_splash_clk_ctrl.part.0+0x14/0x74)
  536. [<802ab490>] (cont_splash_clk_ctrl.part.0+0x14/0x74) from [<802ab738>] (lcdc_probe+0xc4/0x1fc)
  537. [<802ab738>] (lcdc_probe+0xc4/0x1fc) from [<803205ac>] (platform_drv_probe+0x14/0x18)
  538. [<803205ac>] (platform_drv_probe+0x14/0x18) from [<8031f228>] (driver_probe_device+0x138/0x33c)
  539. [<8031f228>] (driver_probe_device+0x138/0x33c) from [<8031dd58>] (bus_for_each_drv+0x48/0x8c)
  540. [<8031dd58>] (bus_for_each_drv+0x48/0x8c) from [<8031f578>] (device_attach+0x7c/0xa0)
  541. [<8031f578>] (device_attach+0x7c/0xa0) from [<8031df2c>] (bus_probe_device+0x28/0x98)
  542. [<8031df2c>] (bus_probe_device+0x28/0x98) from [<8031c5a8>] (device_add+0x3f4/0x5a8)
  543. [<8031c5a8>] (device_add+0x3f4/0x5a8) from [<80320aa8>] (platform_device_add+0x12c/0x19c)
  544. [<80320aa8>] (platform_device_add+0x12c/0x19c) from [<80295a70>] (msm_fb_add_device+0x154/0x1b0)
  545. [<80295a70>] (msm_fb_add_device+0x154/0x1b0) from [<80663e9c>] (lcdc_tenderloin_probe+0x78/0x98)
  546. [<80663e9c>] (lcdc_tenderloin_probe+0x78/0x98) from [<803205ac>] (platform_drv_probe+0x14/0x18)
  547. [<803205ac>] (platform_drv_probe+0x14/0x18) from [<8031f228>] (driver_probe_device+0x138/0x33c)
  548. [<8031f228>] (driver_probe_device+0x138/0x33c) from [<8031dd58>] (bus_for_each_drv+0x48+0x8c)
  549. [<8031dd58>] (bus_for_each_drv+0x48/0x8c) from [<8031f578>] (device_attach+0x7c/0xa0)
  550. [<8031f578>] (device_attach+0x7c/0xa0) from [<8031df2c>] (bus_probe_device+0x28/0x98)
  551. [<8031df2c>] (bus_probe_device+0x28/0x98) from [<8031c5a8>] (device_add+0x3f4/0x5a8)
  552. [<8031c5a8>] (device_add+0x3f4/0x5a8) from [<80320aa8>] (platform_device_add+0x12c/0x19c)
  553. [<80320aa8>] (platform_device_add+0x12c/0x19c) from [<80064440>] (lcdc_tenderloin_device_register+0x7c/0xc8)
  554. [<80064440>] (lcdc_tenderloin_device_register+0x7c/0xc8) from [<808de498>] (lcdc_tenderloin_panel_init+0xa8/0xd8)
  555. [<808de498>] (lcdc_tenderloin_panel_init+0xa8/0xd8) from [<808d2b04>] (do_one_initcall+0x90/0x160)
  556. [<808d2b04>] (do_one_initcall+0x90/0x160) from [<808d2cc8>] (kernel_init+0xf4/0x1b8)
  557. [<808d2cc8>] (kernel_init+0xf4/0x1b8) from [<8000f5f4>] (kernel_thread_exit+0x0/0x8)
  558. <4>---[ end trace ac6fb694cd47dbae ]---
  559. <3>ulpi_read: timeout 48300000
  560. <4>mmc1: queuing unknown CIS tuple 0x01 (3 bytes)
  561. <6>FrameBuffer[0] 1024x768 size=9437184 bytes is registered successfully!
  562. <4>load_565rle_image: Can not open /initlogo.rle
  563. <7>Registered led device: lcd-backlight
  564. <6>mdp4_lcdc_vsync_init: ndx=0
  565. <6>VFP support v0.3: implementor 51 architecture 64 part 2d variant 0 rev 0
  566. <5>Registering SWP/SWPB emulation handler
  567. <6>clock_late_init: Removing enables held for handed-off clocks
  568. <4>mmc1: queuing unknown CIS tuple 0x1a (5 bytes)
  569. <4>mmc1: queuing unknown CIS tuple 0x1b (8 bytes)
  570. <3>ulpi_read_with_reset: ulpi read failed for 5 times
  571. <4>mmc1: quauing unknown CIS tuple 0x14 (0 bytes)
  572. <4>mmc1: queuing unknown CIS tuple 0x80 (1 bytes)
  573. <4>mmc1: queuing unknown CIS tuple 0x81 (1 bytes)
  574. <4>mmc1: queuing unknown CIS tuple 0x82 (1 bytes)
  575. <6>mmc1: new high speed SDIO card at address 0001
  576. <6>MSM Watchdog Initialized
  577. <6>[MPDEC]: msm_mpdec_init init complete.<4>8058_l5: Failed to create debugfs directory
  578. <4>8058_l5: Failed to create debugfs directory
  579. <4>8058_l5: Failed to create debugfs directory
  580. <6>rtc-pm8xxx rtc-pm8xxx: setting system clock to 2014-11-23 22:52:56 UTC (1416783176)
  581. <6>msm_v4l2: msm_v<l2_init
  582. <6>ALSA device list:
  583. <6>  #0: msm-audio
  584. <4>Warning: unable to open an initial console.
  585. <6>Freeing init memory: 268K
  586. <7>SELinux: 1024 avtab hash slots, 2781 rules.
  587. <7>SELinux: 1024 avtab hash slots, 2781 rules.
  588. <7>SELinux:  1 users, 2 roles, 291 types, 1 bools, 1 sens, 1024 cats
  589. <7>SELinux:  84 classes, 2781 rules
  590. <7>SELinux:  Completing initialization.
  591. <7>SELinux:  Setting up existing superblocks.
  592. <7>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
  593. <7>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
  594. <7>SELinux: initialized (dev bdev, type bdev), not configured for labeling
  595. <7>SELinux: initialized (dev proc, type proc), uses genfs_contexts
  596. <7>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
  597. <7>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
  598. <7>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
  599. <7>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
  600. <7>SELinux: initialized (dev anon_inodefs, type anon_inodefs), not configured for labeling
  601. <7>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
  602. <7>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
  603. <7>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
  604. <7>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
  605. <5>type=1403 audit(1416783176.690:2): policy loaded auid=4294967295 ses=4294967295
  606. SELinux: Loaded policy from /sepolicy
  607. <5>type=1404 audit(1416783176.700:3): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
  608. <6>android_work: android_work: did not send uevent (0 0   (null))
  609. <3>init: could not import file 'init.power.rc' from '/init.evervolv.rc'
  610. <4>init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead.
  611. <5>type=1404 audit(1416783180.663:4): enforcing=0 old_enforcing=1 auid=4294967295 ses=4294967295
  612. <3>init: invalid uid 'fm_radio'
  613. <3>init: invalid uid 'felicaclient'
  614. <3>init: invalid uid 'felicaclient'
  615. <3>init: invalid uid 'felicalock'
  616. <3>init: invalid uid 'felicaclient'
  617. <3>init: invalid uid 'felicaclient'
  618. <3>init: invalid uid 'felicaclient'
  619. <3>init: invalid uid 'felicaclient'
  620. <3>init: invalid uid 'felicaclient'
  621. <3>init: invalid uid 'autobot_access'
  622. <3>init: /dev/hw_random not found
  623. <7>SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
  624. <7>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
  625. <7>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
  626. <7>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
  627. <7>SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
  628. <6>kjournald starting.  Commit i?terval 5 seconds
  629. <6>EXT3-fs (mmcblk0p13): using internal journal
  630. <6>EXT3-fs (mmcblk0p13): mounted filesystem with writeback data mode
  631. <7>SELinux: initialized (dev mmcblk0p13, type ext3), uses xattr
  632. <6>EXT4-fs (dm-10): mounted filesystem with ordered data mode. Opts: barrier=1
  633. <7>SELinux: initialized (dev dm-10, type ext4), uses xattr
  634. <6>wm8994-codec wm8994-codec: MBC timestamp 4d6e4685
  635. <6>wm8994-codec wm8994-codec: MBC: ODM to BLOB v0.0.0 (odm2blo.pl:52679)
  636. Copyright (c) Wolfson Microelectronics plc. 2011
  637. Wed  2 Mar 2011 13:30:45
  638. mbc_odl.odm
  639. mbc_odl_vcp.txt
  640.  
  641. <6>wm8994-codec wm8990-codec: MBC: got firmware
  642. <6>wm8994-codec wm8994-codec: MBC+VSS timestamp 4d6e6714
  643. <6>wm8994-codec wm8994-codec: MBC+VSS: ODM to BLOB v0.0.0 (odm2blo.pl:52679)
  644. Copyright (c) Wolfson Microelectronics plc. 2011
  645. Wed  2 Mar 2011 15:49:40
  646. DSPPALM.odm
  647. DSPPALM_vcp.txt
  648.  
  649. <6>wm8994-codec wm8994-codec: MBC+VSS: got firmware
  650. <6>wm8994-codec wm8994-codec: ENH_EQ timestamp 4d6e489e
  651. <6>wm8994-codec wm8994-codec: ENH_EQ: ODM to BLOB v0.0.0 (odm2blo.pl:52679)
  652. Copyright (c) Wolfson Microelectronics plc. 2011
  653. Wed  2 Mar 2011 13:39:42
  654. HP_Beats.odm
  655. HP_Beats_vcp.txt
  656.  
  657. <6>wm8994-codec wm8994-codec: ENH_EQ: got firmware
  658. <3>ath6kl: temporary war to avoid sdio crc error
  659. <6>ath6kl: ar6003 hw 2.1.1 sdio fw 3.2.0.144 api 3
  660. <7>EXT4-fs (dm-9): ext4_orphan_cleanup: deleting unreferenced inode 650850
  661. <7>EXT4-fs (dm-9): ext4_orphan_cleanup: deleting unreferenced inode 650792
  662. <7>EXT4-fs (dm-9): ext4_orphan_cleanup: deleting unreferenced inode 651335
  663. <7>EXT4-fs (dm-9): ext4_orphan_cleanup: deleting unreferenced inode 650484
  664. <6>EXT4-fs (dm-9): 4 orphan inodes deleted
  665. <6>EXT4-fs (dm-9): recovery complete
  666. <6>EXT4-fs (dm-9): mounted filesystem with ordered data mode. Opts: barrier=1,noauto_da_alloc
  667. <7>SELinux: initialized (dev dm-9, type ext4), uses xattr
  668. <6>EXT4-fs (dm-8): recovery complete
  669. <6>EXT4-fs (dm-8): mounted filesystem with ordered data mode. Opts: barrier=1,noauto_da_alloc
  670. <7>SELinux: initialized (dev dm-8, type ext4), uses xattr
  671. <7>SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
  672. <3>init: /dev/hw_random not found
  673. <3>init: cannot find '/system/bin/rild', disabling 'ril-daemon'
  674. <6>subsys-restart: restart_level_set(): Phase 3 behavior activated.
  675. <3>init: property 'sys.powerctl' doesn't exist while expanding '${sys.powerctl}'
  676. <3>init: powerctl: cannot expand '${sys.powerctl}'
  677. <3>init: property 'sys.sysctl.extra_free_kbytes' doesn't exist while expanding '${sys.sysctl.extra_free_kbytes}'
  678. <3>init: cannot expand '${sys.sysctl.extra_free_kbytes}' while writing to '/proc/sys/vm/extra_free_kbytes'
  679. <3>init: property 'sys.sysctl.tcp_def_init_rwnd' doesn't exist while expanding '${sys.sysctl.tcp_def_init_rwnd}'
  680. <3>init: cannot expand '${sys.sysctl.tcp_def_init^rwnd}' while writing to '/proc/sys/net/ipv4/tcp_default_init_rwnd'
  681. <3>init: service 'console' requires console
  682. <3>enable_store: android_usb: already disabled
  683. <3>healthd: wakealarm_init: timerfd_create failed
  684. <6>adb_open
  685. <6>mtp_bind_config
  686. <6>input: HPTouchpad as /devices/virtual/input/input6
  687. <6>msm_release_control: control0
  688. <6>__msm_release, open count =0
  689. <6>__msm_release, vfe_release
  690. <6>__msm_release: draining queue pict
  691. <6>__msm_release: draining queue event
  692. <6>__msm_release: completed
  693. <6>msm_release_control: draining queue control
  694. <6>msm_release_control, completed
  695. <6>a6_update_connected_ps: ac=1 usb=0 dock=0
  696. <6>max8903b_current_setup: CURRENT_750(4), 900(5), 1000(6), 1400(7), 2000MA(9): 9
  697. <6>healthd: battery l=93 v=4104 t=25.0 h=2 st=2 c=303 chg=a
  698. <6>healthd: battery l=93 v=4104 t=25.0 h=2 st=2 c=303 chg=a
  699. <6>msm_otg_suspend: usb in low power mode
  700. <3>[DISP] lcdc_panel_power: ++ 1
  701. <4>8058_l10: Failed to create debugfs directory
  702. <4>mdp4_csc_config: Block type 10 isn't supported by CSC.
  703. <4>mdp4_csc_config: Block type 8 isn't supported by CSC.
  704. <3>[DISP] lcdc_tenderloin_panel_set_backlight: 191
  705. <6>healthd: battery l=93 v=4104 t=25.0 h=2 st=2 c=299 chg=a
  706. <6>mdp4_overlay_mdp_perf_upd mdp clk is changed [1] from 0 to 128000000
  707. <7>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
  708. <6>warning: `zygote' uses 32-bit capabilities (legacy support in use)
  709. <6>lsm303dlh_acc_sysfs: hw init start
  710. <6>lsm303dlh_acc_sysfs: hw init done
  711. <6>healthd: battery l=93 v=4104 t=25.0 h=2 st=2 c=292 chg=a
  712. <6>healthd: battery l=93 v=4104 t=25.0 h=2 st=2 c=292 chg=a
  713. <6>request_suspend_state: wakeup (3->0) at 29228163629 (2014-11-23 22:53:24.687242412 UTC)
  714. <6>lsm303dlh_acc_sysfs: hw init start
  715. <6>lsm303dlh_acc_sysfs: hw init done
  716. lowmem_shrink: convert oom_adj to oom_score_adj:
  717. oom_adj 0 => oom_score_adj 0
  718. oom_adj 1 => oom_score_adj 58
  719. oom_adj 2 => oom_score_adj 117
  720. oom_adj 3 => oom_score_adj 176
  721. oom_adj 9 => oom_score_adj 529
  722. oom_adj 15 => oom_score_adj 1000
  723. <6>acc_open
  724. <6>acc_release
  725. <6>ADDRCONF(NETDEV_UP): wlan0: link is not ready
  726. <3>[DISP] lcdc_tenderloin_panel_set_backlight: 9
  727. <6>ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
  728. <7>SELinux: initialized (dev dm-6, type vfat), uses genfs_contexts
  729. <7>SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
  730. <5>type=1400 audit(1416783207.819:5): avc:  denied  { getattr } for  pid=783 comm="zygote" path="socket:[4059]" dev="sockfs" ino=4059 scontext=u:r:untrusted_app:s0 tcontext=u:r:init:s0 tclass=unix_stream_socket
  731. <5>type=1400 audit(1416783207.819:6): avc:  denied  { getopt } for  pid=783 comm="zygote" path="/dev/socket/zygote" scontext=u:r:untrusted_app:s0 tcontext=u:r:init:s0 tclass=unix_stream_socket
  732. <5>type=1400 audit(1416783207.839:7): avc:  denied  { read } for  pid=783 comm="re-initialized>" path=2F6465762F6173686D656D2F64616C76696B2D4C696E656172416C6C6F63202864656C6574656429 dev="tmpfs" ino=3548 scontext=u:r:untrusted_app:s0 tcontext=u:object_r:init_tmpfs:s0 tclass=file
  733. <5>type=1400 audit(1416783207.839:8): avc:  denied  { call } for  pid=783 comm="re-initialized>" scontext=u:r:untrusted_app:s0 tcontext=u:r:init:s0 tclass=binder
  734. <6>healthd: battery l=93 v=4104 t=25.0 h=2 st=2 c=290 chg=a
  735. <6>cfg80211: Calling CRDA for country: US
  736. <3>qtaguid: iface_stat: stat_update() wlan0 not found
  737. <6>healthd: battery l=93 v=4104 t=25.0 h=2 st=2 c=293 chg=a
  738. <6>msm_otg_resume: usb exited from low power mode
  739. <6>android_work: android_work: did not send uevent (0 0   (null))
  740. <6>a6_update_connected_ps: ac=0 usb=0 dock=0
  741. <6>max8903b_current_setup: ### CHARGE_DISABLE
  742. <6>a6_update_connected_ps: ac=0 usb=0 dock=0
  743. <6>max8903b_current_setup: ### CHARGE_DISABLE
  744. <6>healthd: battery l=93 v=4104 t=25.0 h=2 st=3 c=293 chg=
  745. <6>healthd: battery l=93 v=4104 t=25.0 h=2 st=3 c=293 chg=
  746. <6>healthd: battery l=93 v=4104 t=25.0 h=2 st=3 c=293 chg=
  747. <6>healthd: battery l=93 v=4104 t=25.0 h=2 st=3 c=293 chg=
  748. <6>msm_otg_suspend: usb in low power mode
  749. <6>msm_otg_resume: usb exited from low power mode
  750. <7>wlan0: no IPv6 routers present
  751. <3>[DISP] lcdc_tenderloin_panel_set_backlight: 0
  752. <3>[DISP] lcdc_panel_power: ++ 0
  753. <6>request_suspend_state: sleep (0->3) at 55760629487 (2014-11-23 22:53:51.684025673 UTC)
  754. <6>[MPDEC]: Screen -> off. Deactivated mpdecision.
  755. <5>type=1400"audit(1416783233.925:9): avc:  denied  { read } for  pid=783 comm="putmethod.latin" path=2F6465762F6173686D656D2F64616C76696B2D4C696E656172416C6C6F63202864656C6574656429 dev="tmpfs" ino=3548 scontext=u:r:untrusted_app:s0 tcontext=u:object_r:init_tmpfs:s0 tclass=file
  756. <6>healthd: battery l=93 v=4075 t=25.0 h=2 st=3 c=-456 chg=
  757. <6>a6_update_connected_ps: ac=0 usb=0 dock=0
  758. <6>max8903b_current_setup: ### CHARGE_DISABLE
  759. <6>healthd: battery l=93 v=4070 t=25.0 h=2 st=3 c=-244 chg=
  760. <6>healthd: battery l=93 v=4075 t=25.0 h=2 st=3 c=-139 chg=
  761. <6>healthd: battery l=93 v=4070 t=25.0 h=2 st=3 c=-177 chg=
  762. <6>healthd: battery l=93 v=4075 t=25.0 h=2 st=3 c=-142 chg=
  763. <6>a6_update_connected_ps: ac=0 usb=0 dock=0
  764. <6>max8903b_current_setup: ### CHARGE_DISABLE
  765. <6>healthd: battery l=93 v=4075 t=25.0 h=2 st=3 c=-175 chg=
  766. <6>healthd: battery l=93 v=4075 t=25.0 h=2 st=3 c=-175 chg=
  767. <6>healthd: battery l=93 v=4075 t=25.0 h=2 st=3 c=-175 chg=
  768. <6>android_work: android_work: did not send uevent (0 0   (null))
  769. <6>a6_update_connected_ps: ac=1 usb=0 dock=0
  770. <6>max8903b_current_setup: CURRENT_750(4), 900(5), 1000(6), 1400(7), 2000MA(9): 9
  771. <6>healthd: battery l=93 v=4075 t=25.0 h=2 st=2 c=-175 chg=a
  772. <6>healthd: battery l=93 v=4075 t=25.0 h=2 st=2 c=-175 chg=a
  773. <6>request_suspend_state: wakeup (3->0) at 118307229798 (2014-11-23 22:54:54.230625984 UTC)
  774. <6>[MPDEC]: Screen -> on. Activated mpdecision. | Mask=[1100]
  775. <3>[DISP] lcdc_panel_power: ++ 1
  776. <6>lsm303dlh_acc_sysfs: hw init start
  777. <6>lsm303dlh_acc_sysfs: hw init done
  778. <6>msm_otg_suspend: usb in low power mode
  779. <4>mdp4_csc_config: Block type 10 isn't supported by CSC.
  780. <4>mdp4_csc_config: Block type 8 isn't supported by CSC.
  781. <6>mdp4_overlay_mdp_perf_upd mdp clk is changed [1] from 0 to 128000000
  782. <6>binder: release 871:871 transaction 28536 out, still active
  783. <6>binder: release 871:1696 transaction 28466 out, still active
  784. <6>gpio_keys_scan_keys: key 1-ac, 2 (40) changed to 1
  785. <3>[DISP] lcdc_tenderloin_panel_set_backlight: 9
  786. <6>binder: 495:1471 transaction failed 29189, size 4-0
  787. <6>binder: send failed reply for transaction 28536, target dead
  788. <6>binder: 495:835 transaction failed 29189, size 4-0
  789. <6>binder: send failed reply for transaction 28466, target dead
  790. <6>binder: 495:1884 transaction failed 29189, size 208-0
  791. <6>gpio_keys_scan_keys: key 1-ac, 2 (40) changed to 0
  792. <6>binder: 495:515 transaction failed 29189, size 208-0
  793. <6>binder: 495:515 transaction failed 29189, size 208-0
  794. <6>binder: 495:515 transaction failed 29189, size 208-0
  795. <3>msm_wm8958_setup_power: codec power setup
  796. <4>8058_s3: Failed to create debugfs directory
  797. <3>wm8994_ldo_power: Power up the WM8994 LDOs
  798. <6>pil pil0: q6: Brought out of reset
  799. <6>apr_tal:Q6 Is Up
  800. <6>apr_tal: SMD_EVENT_OPEN
  801. <6>msm_device_put:device speaker_stereo_rx set 0
  802. <6>msm_device_put:device speaker_stereo_rx set 1
  803. <3>msm_device_put:device freq =48000
  804. <3>Device active
  805. <6>msm_device_put:device speaker_mono_tx set 0
  806. <6>msm_device_put:device speaker_mono_tx set 1
  807. <3>msm_device_put:device freq =48000
  808. <6>healthd: battery l=93 v=4089 t=25.0 h=2 st=2 c=-7 chg=a
  809. <6>msm_device_put:device speaker_mono_tx set 0
  810. <6>msm_device_put:device speaker_stereo_rx set 0
  811. <6>msm_device_put:device speaker_stereo_rx set 0
  812. <6>msm_device_put:device speaker_stereo_rx set 1
  813. <3>msm_device_put:device freq =48000
  814. <3>Device active
  815. <6>msm_device_put:device speaker_stereo_rx set 0
  816. <6>msm_device_put:device speaker_stereo_rx set 0
  817. <6>msm_device_put:device speaker_stereo_rx set 1
  818. <3>msm_device_put:device freq =48000
  819. <3>Device active
  820. <5>type=1400 audit(1416783309.558:10): avc:  denied  { getattr } for  pid=2115 comm="zygote" path="socket:[4059]" dev="sockfs" ino=4059 scontext=u:r:untrusted_app:s0 tcontext=u:r:init:s0 tclass=unix_stream_socket
  821. <5>type=1400 audit(1416783309.558:11): avc:  denied  { getopt } for  pid=2115 comm="zygote" path="/dev/socket/zygote" scontext=u:r:untrusted_app:s0 tcontext=u:r:init:s0 tclass=unix_stream_socket
  822. <5>type=1400 audit(1416783309.889:12): avc:  denied  { read write } for  pid=205 comm="Binder_2" path="socket:[9261]" dev="sockfs" ino=9261 scontext=u:r:untrusted_app:s0 tcontext=u:r:init:s0 tclass=unix_stream_socket
  823. <5>type=1400 audit(1416783310.059:13): avc:  denied  { transfer } for  pid=2115 comm="sstuff.touchpad" scontext=u:r:untrusted_app:s0 tcontext=u:r:init:s0 tclass=binder
  824. <6>msm_device_put:device speaker_stereo_rx set 0
  825. <6>healthd: battery l=93 v=4089 t=25.0 h=2 st=3 c=125 chg=a
  826. <6>healthd: battery l=93 v=4094 t=25.0 h=2 st=3 c=189 chg=a
  827. <6>healthd: battery l=93 v=4094 t=25.0 h=2 st=2 c=177 chg=a
  828. <6>healthd: battery l=93 v=4084 t=25.0 h=2 st=2 c=0 chg=a
  829. <6>healthd: battery l=93 v=4094 t=25.0 h=2 st=2 c=163 chg=a
  830. <6>healthd: battery l=100 v=4089 t=25.0 h=2 st=5 c=0 chg=a
  831. <6>msm_device_put:device speaker_stereo_rx set 0
  832. <6>msm_device_put:device speaker_stereo_rx set 1
  833. <3>msm_device_put:device freq =48000
  834. <3>Device active
  835. <6>msm_device_put:device speaker_stereo_rx set 0
  836. <6>msm_device_put:device speaker_mono_tx set 0
  837. <6>msm_device_put:device speaker_mono^tx set 1
  838. <3>msm_device_put:device freq =48000
  839. <6>msm_device_put:device speaker_mono_tx set 0
  840. <6>msm_device_put:device speaker_mono_tx set 0
  841. <6>msm_device_put:device speaker_mono_tx set 1
  842. <3>msm_device_put:device freq =48000
  843. <5>type=1400 audit(1416784301.446:14): avc:  denied  { read write } for  pid=783 comm="putmethod.latin" name="kgsl-3d0" dev="tmpfs" ino=4346 scontext=u:r:untrusted_app:s0 tcontext=u:object_r:device:s0 tclass=chr_file
  844. <5>type=1400 audit(1416784301.446:15): avc:  denied  { open } for  pid=783 comm="putmethod.latin" name="kgsl-3d0" dev="tmpfs" ino=4346 scontext=u:r:untrusted_app:s0 tcontext=u:object_r:device:s0 tclass=chr_file
  845. <5>type=1400 audit(1416784301.446:16): avc:  denied  { ioctl } for  pid=783 comm="putmethod.latin" path="/dev/kgsl-3d0" dev="tmpfs" ino=4346 scontext=u:r:untrusted_app:s0 tcontext=u:object_r:device:s0 tclass=chr_file
  846. <3>[DISP] ?cdc_tenderloin_panel_set_backlight: 0
  847. <3>[DISP] lcdc_panel_power: ++ 0
  848. <6>request_suspend_state: sleep (0->3) at 1894633096525 (2014-11-23 23:24:30.556492711 UTC)
  849. <6>[MPDEC]: Screen -> off. Deactivated mpdecision.
  850. <6>SysRq : Show Blocked State
  851. <6>  task                PC stack   pid father
  852. <6>binder: release 495:495 transaction 84942 out, still active
  853. <6>binder: release 495:659 transaction 62788 out, still active
  854. <3>[DISP] lcdc_panel_power: ++ 1
  855. <6>lsm303dlh_acc_sysfs: hw init start
  856. <6>lsm303dlh_acc_sysfs: hw init done
  857. <6>alarm_release: clear alarm, pending 0
  858. <6>alarm_release: clear alarm, pending 0
  859. <4>mdp4_csc_config: Block type 10 isn't supported by CSC.
  860. <4>mdp4_csc_config: Block type 8 isn't supported by CSC.
  861. <6>mdp4_overlay_mdp_perf_upd mdp clk is changed [1] from 0 to 128000000
  862. <6>request_suspend_state: wakeup (3->0) at 1985682870689 (2014-11-23 23:26:01.606266875 UTC)
  863. <6>[MPDEC]: Screen -> on. Activated mpdecision. | Mask=[1000]
  864. <6>binder: release 181:181 transaction 62788 in, still active
  865. <6>binder: send failed reply for transaction 62788, target dead
  866. <6>binder: release 181:264 transaction 84942 in, still active
  867. <6>binder: send failed reply for transaction 84942, target dead
  868. <6>binder: release 181:661 transaction 62897 in, still active
  869. <6>binder: send failed reply for transaction 62897 to 1561:2011
  870. <6>binder: undelivered death notification, 017b5ed0
  871. <6>binder: undelivered death notification, 017b4290
  872. <3>init: untracked pid 899 exited
  873. <3>init: untracked pid 2115 exited
  874. <3>init: untracked pid 2330 exited
  875. <3>init: untracked pid 1340 exited
  876. <3>init: untracked pid 1887 exited
  877. <6>msm_release_control: control0
  878. <6>__msm_release, open count =0
  879. <6>__msm_release, vfe_release
  880. <6>__msm_release: draining queue pict
  881. <6>__msm_release: draining queue event
  882. <6>__msm_release: completed
  883. <6>msm_release_control: draining queue control
  884. <6>msm_release_control, completed
  885. <3>init: untracked pid 1637 exited
  886. <7>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
  887. <3>init:"untracked pid 1609 exited
  888. <3>init: untracked pid 1561 exited
  889. <3>init: untracked pid 1993 exited
  890. <3>init: untracked pid 1774 exited
  891. <3>init: untracked pid 815 exited
  892. <3>init: untracked pid 837 exited
  893. <3>init: untracked pid 1944 exited
  894. <3>init: untracked pid 1985 exited
  895. <3>init: untracked pid 1474 exited
  896. <3>init: untracked pid 774 exited
  897. <3>init: untracked pid 678 exited
  898. <3>init: untracked pid 1919 exited
  899. <3>init: untracked pid 783 exited
  900. <6>healthd: battery l=100 v=4113 t=26.0 h=2 st=5 c=218 chg=a
  901. <6>request_suspend_state: wakeup (0->0) at 1995645913910 (2014-11-23 23:26:11.569310096 UTC)
  902. <6>lsm303dlh_acc_sysfs: hw init start
  903. <6>lsm303dlh_acc_sysfs: hw init done
  904. lowmem_shrink: convert oom_adj to oom_score_adj:
  905. oom_adj 0 => oom_score_adj 0
  906. oom_adj 1 => oom_score_adj 58
  907. oom_adj 2 => oom_score_adj 117
  908. oom_adj 3 => oom_score_adj 176
  909. oom_adj 9 => oom_score_adj 529
  910. oom_adj 15 => oom_score_adj 1000
  911. <6>cfg80211: Calling CRDA for country: US
  912. <6>acc_open
  913. <6>acc_release
  914. <6>ADDRCONF(NETDEV_UP): wlan0: link is not ready
  915. <3>[DISP] lcdc_tenderloin_panel_set_backlight: 9
  916. <6>ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
  917. <6>cfg80211: Calling CRDA to update world regulatory domain
  918. <5>type=1400 audit(1416785175.038:17): avc:  denied  { call } for  pid=3122 comm="re-initialized>" scontext=u:r:untrusted_app:s0 tcontext=u:r:init:s0 tclass=binder
  919. <7>wlan0: no IPv6 routers present
  920. <3>[DISP] lcdc_tenderloin_panel_set_backlight: 0
  921. <3>[DISP] lcdc_panel_power: ++ 0
  922. <6>request_suspend_state: sleep (0->3) at 2016642826793 (2014-11-23 23:26:32.521748819 UTC)
  923. <6>[MPDEC]: Screen -> off. Deactivated mpdecision.
  924. <6>PM: suspend entry 2014-11-23 23:27:35.039510014 UTC
  925. Freezing user space processes ... (elapsed 0.004 seconds) done.
  926. Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
  927. Suspending console(s) (use no_console_suspend to debug)
  928. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  929. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  930. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  931. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  932. <3>msm_wm8958_shutdown_power: codec power shutdown
  933. <3>wm8994_ldo_power: Power down the WM8994 LDOs
  934. max8903b_suspend: suspend
  935. <6>PM: suspend of devices complete after 184.295 msecs
  936. <6>PM: late suspend of devices complete after 1.800 msecs
  937. <6>PM: noirq suspend of devices complete after 2.410 msecs
  938. Disabling non-boot CPUs ...
  939. <6>msm_pm_enter
  940. <6>msm_pm_enter: power collapse
  941. <6>msm_mpm_irqs_detectable: cannot monitor 0000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000<6>msm_pm_enter: return
  942. <6>PM: noirq resume of devices complete after 1.831 msecs
  943. <3>lpass_8x60: Watchdog bite received from Q6!
  944. <6>subsys-restart: subsystem_restart_dev(): Restart sequence requested for lpass, restart_level = 3.
  945. <6>wakeup wake lock: ssr(lpass)
  946. <6>subsys-restart: subsystem_shutdown(): [af512c00]: Shutting down lpass
  947. <3>lpass_8x60: Watchdog bite received from Q6!
  948. <6>subsys-restart: subsystem_restart_dev(): Restart sequence requested for lpass, restart_level = 3.
  949. <6>PM: early resume of devices complete after 1.800 msecs
  950. max8903b_resume: resume
  951. <3>msm_wm8958_setup_power: codec power setup
  952. <4>8058_s3: Failed to create debugfs directory
  953. <3>wm8994_ldo_power: Power up the WM8994 LDOs
  954. <6>gpio_keys_scan_keys: key 1-ac, 2 (40) changed to 1
  955. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  956. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  957. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  958. <6>PM: resume of devices complete after 108.688 msecs
  959. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  960. <6>gpio_keys_scan_keys: key 1-ac, 2 (40) changed to 0
  961. Restarting tasks ... <6>subsystem-fatal-8x60: Q6 NMI was sent.
  962. <6>request_suspend_state: wakeup (3->0) at 2079506629909 (2014-11-23 23:28:09.017717351 UTC)
  963. done.
  964. <6>PM: suspe.d exit 2014-11-23 23:28:09.018388204 UTC
  965. <6>suspend: exit suspend, ret = 0 (2014-11-23 23:28:09.018388204 UTC)
  966. <6>lsm303dlh_acc_sysfs: hw init start
  967. <6>subsys-restart: subsystem_powerup(): [af512c00]: Powering up lpass
  968. <6>[MPDEC]: Screen -> on. Activated mpdecision. | Mask=[1000]
  969. <3>[DISP] lcdc_panel_power: ++ 1
  970. <6>lsm303dlh_acc_sysfs: hw init done
  971.  
  972. Broadcasting: Intent { act=com.evervolv.toolbox.action.DUMPLOGCAT_FINISHED (has extras) }
  973. Broadcast completed: result=0
  974.  

Reply to "Logcat: ev_tenderloin-nightly-2014.08.17"

Here you can reply to the paste above

Powered by Stikked