Evervolv Paste

Logcat: ev_tenderloin-6.0.1-testing-2016.02.16

From EVLogcat Uploader, 8 Years ago, written in Plain Text, viewed 530 times.
URL http://paste.evervolv.com/view/6919da74 Embed
Download Paste or View Raw
  1. ------ LAST KMSG (/proc/last_klog) ------
  2. platform_init_mmu_mappings: entry
  3. platform_init_mmu_mappings:57: mapping shared ram as uncached at 0x40000000
  4. platform_init_mmu_mappings: exit
  5. platform_init_timer: entry
  6. platform_init_timer: exit
  7. platform_set_periodic_timer:39: cb 0x4010c6bd, arg 0x0, interval 10
  8. ******************************************
  9. * Welcome to bootie!
  10. *   Version: 468
  11. ******************************************
  12. mmch_init: entry
  13. mmch_init: exit
  14. usbc: initialized (rc=0)
  15. target_init_buttonscan: entry
  16. target_init_board_id: emu=0, product=0x1, hwbuild=1
  17. boardtype=topaz-Wifi-pvt
  18. Memory bank 0 -> address: 0x40200000-0x46700000 size:0x06500000
  19. Memory bank 1 -> address: 0x48000000-0x7ff00000 size:0x37F00000
  20. i2c_init: Register GSBI 3 as i2c bus 0
  21. i2c_init_clock: The i2c clock rate is 19200000
  22. i2c_init: Register GSBI 4 as i2c bus 1
  23. i2c_init_clock: The i2c clock rate is 19200000
  24. i2c_init: Register GSBI 9 as i2c bus 2
  25. i2c_init_clock: The i2c clock rate is 19200000
  26. i2c_init: Register GSBI 8 as i2c bus 3
  27. i2c_init_clock: The i2c clock rate is 19200000
  28. i2c_init: Register GSBI 7 as i2c bus 4
  29. i2c_init_clock: The i2c clock rate is 19200000
  30. a6_init_sbw_pins: TCK: 157, TDIO; 158, WKUP: 155
  31. max8903b_gpio_init
  32. Starting battery authentication...
  33. Battery auth succeeded
  34. sys_init: entry
  35. Wall message(Boot reason) = 0x77665502 ("recovery")
  36. sys_init: booted because 'recovery'
  37. mmch_reset: entry
  38. Bus(0) Primecell ID regs:
  39. 0x80 0x11 0x4 0x0
  40. 0xd 0xf0 0x5 0xb1
  41. sdc1_clk_set 400000
  42. mmch_set_active:727: bus 0, active 1
  43. sdc1_clk_set 400000
  44. mmch_reset: exit
  45. mmch_set_active:727: bus 0, active 1
  46. sdc1_clk_set 400000
  47. cid: 0x2010053 0x454d3136 0x479051a5 0x50e86ef2
  48.         mfg id: 0x2
  49.         oem id: 0x100
  50.         name: 'SEM16G'
  51.         rev: 0x90
  52.         sn: 0x51a550e8
  53.         date: 6.2011
  54. sdc1_clk_set 50000000
  55. token section is 4096 bytes long
  56. target_check_boot_condition: entry
  57. Wall message(Boot reason) = 0x77665502 ("recovery")
  58. display_init: displayWidth: 1024, displayHeight: 768
  59. Wall message(Boot reason) = 0x77665502 ("recovery")
  60. p=99 ca=4993600 v=4089440 i=-955156
  61. autobooting with 'fsboot' command
  62. loading file '/boot/uImage' to address 0x41000000
  63. parse_uimage:241: uimage 0x41000000
  64. <6>[    0.000000] Booting Linux on physical CPU 0
  65. <6>[    0.000000] Initializing cgroup subsys cpu
  66. <5>[    0.000000] Linux version 3.0.101-cyanogenmod-g2231aef (jc@jc-desk1) (gcc version 4.7 (GCC) ) #1 SMP PREEMPT Mon Mar 17 02:45:12 CDT 2014
  67. <4>[    0.000000] CPU: ARMv7 Processor [510f02d2] revision 2 (ARMv7), cr=10c5387d
  68. <4>[    0.000000] CPU: VIPT nonaliasing data cache, VIVT ASID tagged instruction cache
  69. <4>[    0.000000] Machine: TENDERLOIN
  70. <6>[    0.000000] memory pool 0 (start 38000000 size 600000) initialized
  71. <6>[    0.000000] memory pool 1 (start 38600000 size 3802000) initialized
  72. <6>[    0.000000] memory pool 3 (start 75e00000 size 9800000) initialized
  73. <4>[    0.000000] Memory policy: ECC disabled, Data cache writealloc
  74. <3>[    0.000000] smem_find(137, 72): wrong size 64
  75. <6>[    0.000000] socinfo_init: v5, id=86, ver=2.0, raw_id=1696, raw_ver=1696, hw_plat=0,  hw_plat_ver=65536
  76. <6>[    0.000000]  accessory_chip=0
  77. <7>[    0.000000] On node 0 totalpages: 213760
  78. <7>[    0.000000] free_area_init_node: node 0, pgdat 80c96460, node_mem_map 81117000
  79. <7>[    0.000000]   Normal zone: 2024 pages used for memmap
  80. <7>[    0.000000]   Normal zone: 0 pages reserved
  81. <7>[    0.000000]   Normal zone: 211736 pages, LIFO batch:31
  82. <6>[    0.000000] passing from bootie 6291456 bytes at 7f600000 physical for fb
  83. <6>[    0.000000] PERCPU: Embedded 8 pages/cpu @81909000 s9536 r8192 d15040 u32768
  84. <7>[    0.000000] pcpu-alloc: s9536 r8192 d15040 u32768 alloc=8*4096
  85. <7>[    0.000000] pcpu-alloc: [0] 0 [0] 1
  86. <4>[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 211736
  87. <5>[    0.000000] Kernel command line: root=/dev/ram0 rootwait ro fbcon=disable console=ttyS0,115200n8 androidboot.serialno=MHUBS9F1HNSJGRRLS6VR8481VBMJ9IFL  fb=0x7f600000 nduid=63af5c3db01f2f907feacdcfd880a0f79d994eba klog=0x7ff00000 klog_len=0x100000 boardtype=topaz-Wifi-pvt lastboot=recovery
  88. <4>[    0.000000] boardtype_setup: boardtype_str = topaz-Wifi-pvt
  89. <4>[    0.000000] boardtype_setup: boardtype = topaz_wifi
  90. <6>[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
  91. <6>[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  92. <6>[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  93. <6>[    0.000000] allocated 4145152 bytes of page_cgroup
  94. <6>[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
  95. <6>[    0.000000] Memory: 101MB 734MB = 835MB total
  96. <5>[    0.000000] Memory: 822288k/822288k available, 188400k reserved, 0K highmem
  97. <5>[    0.000000] Virtual kernel memory layout:
  98. <5>[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
  99. <5>[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
  100. <5>[    0.000000]     DMA     : 0xff000000 - 0xffe00000   (  14 MB)
  101. <5>[    0.000000]     vmalloc : 0xbf800000 - 0xfa000000   ( 936 MB)
  102. <5>[    0.000000]     lowmem  : 0x80000000 - 0xbf400000   (1012 MB)
  103. <5>[    0.000000]     pkmap   : 0x7fe00000 - 0x80000000   (   2 MB)
  104. <5>[    0.000000]     modules : 0x7f000000 - 0x7fe00000   (  14 MB)
  105. <5>[    0.000000]       .init : 0x80008000 - 0x80055000   ( 308 kB)
  106. <5>[    0.000000]       .text : 0x80100000 - 0x80b75e44   (10712 kB)
  107. <5>[    0.000000]       .data : 0x80c00000 - 0x80c98b80   ( 611 kB)
  108. <5>[    0.000000]        .bss : 0x80c98ba4 - 0x811122c4   (4582 kB)
  109. <6>[    0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
  110. <6>[    0.000000] Preemptible hierarchical RCU implementation.
  111. <6>[    0.000000] NR_IRQS:855
  112. <6>[    0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms
  113. <6>[    0.000000] Console: colour dummy device 80x30
  114. <6>[    0.150177] Calibrating delay using timer specific routine.. 13.52 BogoMIPS (lpj=67649)
  115. <6>[    0.150268] pid_max: default: 32768 minimum: 301
  116. <6>[    0.150634] Security Framework initialized
  117. <6>[    0.150695] SELinux:  Initializing.
  118. <7>[    0.150787] SELinux:  Starting in permissive mode
  119. <6>[    0.150970] Mount-cache hash table entries: 512
  120. <6>[    0.152252] Initializing cgroup subsys cpuacct
  121. <6>[    0.152404] Initializing cgroup subsys memory
  122. <6>[    0.152496] Initializing cgroup subsys freezer
  123. <6>[    0.152587] CPU: Testing write buffer coherency: ok
  124. <6>[    0.152984] hw perfevents: enabled with ARMv7 Scorpion-MP PMU driver, 5 counters available
  125. <4>[    0.184448] CPU1: Booted secondary processor
  126. <6>[    0.194396] Brought up 2 CPUs
  127. <6>[    0.194427] SMP: Total of 2 processors activated (27.05 BogoMIPS).
  128. <6>[    0.206878] print_constraints: dummy:
  129. <3>[    0.207000] rdev_init_debugfs: Error-Bad Function Input
  130. <6>[    0.207336] NET: Registered protocol family 16
  131. <3>[    0.207550] AXI: msm_bus_fabric_init_driver(): msm_bus_fabric_init_driver
  132. <6>[    0.209167] msm_rpm_init: RPM firmware 2.0.67653
  133. <4>[    0.209716] tenderloin_setup_pin_table: using tenderloin_pins_wifi
  134. <6>[    0.210083] saw_probe: id=0, name=8901_s0
  135. <6>[    0.210449] saw_probe: id=1, name=8901_s1
  136. <6>[    0.211914] rcg_clk_handoff: gsbi12_uart_clk rate=7372800
  137. <6>[    0.212005] rcg_clk_handoff: gsbi3_qup_clk rate=24000000
  138. <6>[    0.212066] rcg_clk_handoff: gsbi4_qup_clk rate=24000000
  139. <6>[    0.212127] rcg_clk_handoff: gsbi7_qup_clk rate=24000000
  140. <6>[    0.212188] rcg_clk_handoff: gsbi8_qup_clk rate=24000000
  141. <6>[    0.212280] rcg_clk_handoff: gsbi9_qup_clk rate=24000000
  142. <6>[    0.212341] rcg_clk_handoff: sdc1_clk rate=48000000
  143. <6>[    0.212402] rcg_clk_handoff: usb_hs1_xcvr_clk rate=60000000
  144. <6>[    0.212493] rcg_clk_handoff: dsi_byte_clk rate=1
  145. <6>[    0.212585] rcg_clk_handoff: mdp_clk rate=200000000
  146. <6>[    0.212738] rcg_clk_handoff: pixel_mdp_clk rate=96000000
  147. <6>[    0.214294] Max ACPU freq: 1512000 KHz
  148. <6>[    0.219909] CPU0: 23 scaling frequencies supported.
  149. <6>[    0.219940] CPU1: 23 scaling frequencies supported.
  150. <6>[    0.221191] pm8058_probe: PMIC revision: E3
  151. <6>[    0.222229] pm_gpio_probe: OK: base=173, ngpio=40
  152. <6>[    0.222412] pm8xxx_mpp_probe: OK: base=213, ngpio=12
  153. <6>[    0.223266] pm8901_probe: PMIC REVISION = F4
  154. <6>[    0.223602] pm8xxx_mpp_probe: OK: base=225, ngpio=4
  155. <6>[    0.536468] gpio_vreg_probe: id=225, name=ext_5v, gpio=225, gpio_label=ext_5v_en
  156. <3>[    0.537628] msm_snddev_init
  157. <3>[    0.538269] Registering a6_0 device.
  158. <6>[    0.552429] bio: create slab <bio-0> at 0
  159. <6>[    0.553741] ION heap vmalloc created
  160. <6>[    0.553802] ION heap mm created at 38800000 with size 3600000
  161. <6>[    0.553833] ION heap mm_fw created at 38600000 with size 200000
  162. <6>[    0.553894] ION heap mfc created at 3be00000 with size 2000
  163. <6>[    0.553955] ION heap sf created at 75e00000 with size 4000000
  164. <6>[    0.554016] ION heap camera_preview created at 79e00000 with size 4000000
  165. <6>[    0.554077] ION heap wb created at 7de00000 with size 600000
  166. <6>[    0.554138] ION heap qsecom created at 7e400000 with size 600000
  167. <6>[    0.554199] ION heap audio created at 7ea00000 with size 28b000
  168. <5>[    0.554321] pmic8058_pwm_probe: OK
  169. <6>[    0.554382] klog_init: phys buffer at 0x7ff00000
  170. <6>[    0.554443] klog_init: virt address at 0xbfe00000
  171. <6>[    0.554473] klog_init: found valid klog, len 1048576
  172. <6>[    0.554534] klog_init: using buffer 2 at 0xbfe8000c, length 262116
  173. <5>[    0.556976] SCSI subsystem initialized
  174. <6>[    0.557220] usbcore: registered new interface driver usbfs
  175. <6>[    0.557342] usbcore: registered new interface driver hub
  176. <6>[    0.557586] usbcore: registered new device driver usb
  177. <6>[    0.557861] Advanced Linux Sound Architecture Driver Version 1.0.24.
  178. <6>[    0.558349] Bluetooth: Core ver 2.16
  179. <6>[    0.558441] NET: Registered protocol family 31
  180. <6>[    0.558471] Bluetooth: HCI device and connection manager initialized
  181. <6>[    0.558563] Bluetooth: HCI socket layer initialized
  182. <6>[    0.558715] Switching to clocksource gp_timer
  183. <6>[    0.575134] NET: Registered protocol family 2
  184. <6>[    0.575317] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
  185. <6>[    0.575744] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
  186. <6>[    0.576965] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
  187. <6>[    0.577667] TCP: Hash tables configured (established 131072 bind 65536)
  188. <6>[    0.577758] TCP reno registered
  189. <6>[    0.577789] UDP hash table entries: 512 (order: 2, 16384 bytes)
  190. <6>[    0.577911] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  191. <6>[    0.578369] NET: Registered protocol family 1
  192. <6>[    0.578857] RPC: Registered named UNIX socket transport module.
  193. <6>[    0.578948] RPC: Registered udp transport module.
  194. <6>[    0.579010] RPC: Registered tcp transport module.
  195. <6>[    0.579071] RPC: Registered tcp NFSv4.1 backchannel transport module.
  196. <6>[    0.579315] Trying to unpack rootfs image as initramfs...
  197. <6>[    1.193084] Freeing initrd memory: 2388K
  198. <6>[    1.193298] PMU: registered new PMU device of type 0
  199. <6>[    1.193481] PMU: registered new PMU device of type 1
  200. <6>[    1.194000] ETM/ETB intialized.
  201. <6>[    1.194213] pil_qdsp6v3 pil_qdsp6v3: using non-secure boot
  202. <3>[    1.195037] smd_channel_probe_worker: allocation table not initialized
  203. <7>[    1.199523] gpio_request: gpio-229 (msm_icodec_speaker_right) status -22
  204. <3>[    1.199584] initialize_msm_icodec_gpios: icodec gpio 229 request failed
  205. <3>[    1.199676] msm_icodec_gpio_probe: GPIO configuration failed
  206. <6>[    1.202239] Powering off BT - ignored
  207. <5>[    1.203308] msm_rpm_log_probe: OK
  208. <6>[    1.203674] audit: initializing netlink socket (disabled)
  209. <5>[    1.203796] type=2000 audit(1.170:1): initialized
  210. <6>[    1.282562] ashmem: initialized
  211. <6>[    1.288513] NTFS driver 2.1.30 [Flags: R/W].
  212. <6>[    1.288787] fuse init (API version 7.16)
  213. <6>[    1.289001] msgmni has been set to 1610
  214. <7>[    1.289062] SELinux:  Registering netfilter hooks
  215. <6>[    1.290802] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
  216. <6>[    1.290893] io scheduler noop registered
  217. <6>[    1.290954] io scheduler deadline registered
  218. <6>[    1.291015] io scheduler row registered (default)
  219. <6>[    1.291107] io scheduler cfq registered
  220. <4>[    1.293304] mdp4_csc_config: Block type 10 isn't supported by CSC.
  221. <4>[    1.293395] mdp4_csc_config: Block type 8 isn't supported by CSC.
  222. <3>[    1.296661] lcdc_lg_panel_init: called
  223. <6>[    1.297058] Lcdc_lg_probe: bl_pwm0=b570d800 LPG_chan0=0
  224. <6>[    1.301025] mdp4_lcdc_vsync_init: ndx=0
  225. <6>[    1.305480] FrameBuffer[0] 1024x768 size=6291456 bytes is registered successfully!
  226. <3>[    1.305572] pm_runtime: fail to wake up
  227. <3>[    1.305633] lcdc_common_panel_power: on=1 isOn=0
  228. <4>[    1.309570] mdp4_csc_config: Block type 10 isn't supported by CSC.
  229. <4>[    1.309661] mdp4_csc_config: Block type 8 isn't supported by CSC.
  230. <4>[    1.312591] load_565rle_image: Can not open /initlogo.rle
  231. <7>[    1.312927] Registered led device: lcd-backlight
  232. <6>[    1.312988] mdp4_lcdc_vsync_init: ndx=0
  233. <6>[    1.313873]
  234. <6>[    1.313903]  msm_vidc_enc: Inside vid_enc_init()
  235. <6>[    1.314117]
  236. <6>[    1.314147]  msm_vidc_enc: Inside vid_enc_vcd_init()
  237. <3>[    1.381622] msm_serial_hs_init failed to load
  238. <6>[    1.381774] msm_serial_hsl: detected port #0
  239. <6>[    1.381927] msm_serial_hsl.0: ttyHSL0 at MMIO 0x19c40000 (irq = 227) is a MSM
  240. <6>[    1.382537] msm_serial_hsl: driver initialized
  241. <6>[    1.383758] msm_rotator_probe: rotator_hw_revision=1
  242. <6>[    1.390075] kgsl kgsl-3d0: |kgsl_gpummu_init| MMU type set for device is GPUMMU
  243. <6>[    1.391571] kgsl kgsl-2d0: |kgsl_gpummu_init| MMU type set for device is GPUMMU
  244. <6>[    1.392761] kgsl kgsl-2d1: |kgsl_gpummu_init| MMU type set for device is GPUMMU
  245. <6>[    1.397827] brd: module loaded
  246. <6>[    1.399993] loop: module loaded
  247. <6>[    1.400207] pmem: Initializing pmem_adsp (user-space) as non-cached
  248. <6>[    1.400604] allocating 6291456 bytes at   (null) (7ec8b000 physical) for pmem_adsp
  249. <6>[    1.400756] pmem: Initializing pmem_audio (user-space) as non-cached
  250. <6>[    1.401000] allocating 2666496 bytes at   (null) (7f28b000 physical) for pmem_audio
  251. <5>[    1.401397] pm8xxx_upl_probe: OK
  252. <4>[    1.402801] hsuart_tty:created 'ttyHS0' device on UART 0
  253. <4>[    1.403015] user-pins: configuring irq for gpio 129
  254. <6>[    1.403411] Initialize hres_counter device
  255. <6>[    1.403533] Before a6 call to i2c_add_driver.
  256. <3>[    1.404724] a6_init_state: enabling A6 internal wake.
  257. <3>[    1.404815] a6_init_state: TS2_I2C_WAKEUP_PERIOD = 0x1b
  258. <6>[    1.452606] A6 Version: HW: 255, FW (M.m.B): 2.13.25, ManID: 28769, ProdTyp: 1281
  259. <5>[    1.479583] A6 driver initialized successfully!
  260. <3>[    1.480743] a6_init_state: enabling A6 internal wake.
  261. <3>[    1.480865] a6_init_state: TS2_I2C_WAKEUP_PERIOD = 0x1b
  262. <6>[    1.532684] A6 Version: HW: 255, FW (M.m.B): 2.7.29, ManID: 28769, ProdTyp: 1793
  263. <5>[    1.536132] A6 driver initialized successfully!
  264. <4>[    1.536224] i2c-core: driver [a6] using legacy suspend method
  265. <4>[    1.536315] i2c-core: driver [a6] using legacy resume method
  266. <3>[    1.536712] msm_wm8958_setup_power: codec power setup
  267. <3>[    1.536834] wm8994_ldo_power: Power up the WM8994 LDOs
  268. <6>[    1.568176] wm8994 4-001a: WM8958 revision B
  269. <4>[    1.583618] wm8994 4-001a: No interrupt specified, no interrupts
  270. <7>[    1.583892] gpiochip_find_base: found new base at 501
  271. <3>[    1.584045] wm8994_resume: CALLED
  272. <3>[    1.584106] wm8994_suspend: CALLED
  273. <3>[    1.588470] msm_wm8958_shutdown_power: codec power shutdown
  274. <3>[    1.588531] wm8994_ldo_power: Power down the WM8994 LDOs
  275. <6>[    1.589691] SCSI Media Changer driver v0.25
  276. <6>[    1.590576] PPP generic driver version 2.4.2
  277. <6>[    1.590911] PPP Deflate Compression module registered
  278. <6>[    1.591003] PPP BSD Compression module registered
  279. <6>[    1.592742] PPP MPPE Compression module registered
  280. <6>[    1.592803] NET: Registered protocol family 24
  281. <6>[    1.592895] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
  282. <6>[    1.593017] CSLIP: code copyright 1989 Regents of the University of California.
  283. <6>[    1.593475] tun: Universal TUN/TAP device driver, 1.6
  284. <6>[    1.593536] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  285. <6>[    1.593994] usbcore: registered new interface driver asix
  286. <6>[    1.594085] usbcore: registered new interface driver cdc_ether
  287. <6>[    1.594177] usbcore: registered new interface driver net1080
  288. <6>[    1.594299] usbcore: registered new interface driver cdc_subset
  289. <6>[    1.594390] usbcore: registered new interface driver zaurus
  290. <6>[    1.594482] cdc_ncm: 04-Aug-2011
  291. <6>[    1.594543] usbcore: registered new interface driver cdc_ncm
  292. <6>[    1.594635] rmnet_init: SMD devices[8]
  293. <3>[    1.600677] Error: Driver 'msm_otg' is already registered, aborting...
  294. <6>[    1.600738] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  295. <6>[    1.601013] host driver registered w/ tranceiver
  296. <6>[    1.601165] usbcore: registered new interface driver cdc_acm
  297. <6>[    1.601226] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
  298. <6>[    1.601348] Initializing USB Mass Storage driver...
  299. <6>[    1.601440] usbcore: registered new interface driver usb-storage
  300. <6>[    1.601531] USB Mass Storage support registered.
  301. <6>[    1.601593] usbcore: registered new interface driver usb_ehset_test
  302. <6>[    1.601898] peripheral driver registered w/ tranceiver
  303. <4>[    1.601989] msm_otg_sm_work 1816 id=0 OTG_STATE_UNDEFINED
  304. <6>[    1.604156] android_usb gadget: Mass Storage Function, version: 2009/09/11
  305. <6>[    1.604248] android_usb gadget: Number of LUNs=2
  306. <6>[    1.604309]  lun0: LUN: removable file: (no medium)
  307. <6>[    1.604400]  lun1: LUN: removable file: (no medium)
  308. <6>[    1.604766] android_usb gadget: android_usb ready
  309. <4>[    1.605072] mousedev: could not register psaux device, error: -16
  310. <6>[    1.605163] mousedev: PS/2 mouse device common for all mice
  311. <6>[    1.605804] input: gpio-keys as /devices/platform/gpio-keys/input/input0
  312. <3>[    1.607818] board_cy8ctma395_vdd_enable: enable=1 isPowerOn=0
  313. <6>[    1.619598] input: pmic8xxx_pwrkey as /devices/platform/msm_ssbi.0/pm8058-core/pm8xxx-pwrkey/input/input1
  314. <6>[    1.620422] <6>lsm303dlh magnetometer driver
  315. <3>[    1.620513] lsm303dlh_mag_sysfs: probe start
  316. <6>[    1.621063] input: lsm303dlh_mag_sysfs as /devices/i2c-0/0-001e/input/input2
  317. <6>[    1.621490] lsm303dlh_mag_sysfs 0-001e: lsm303dlh_mag probed
  318. <7>[    1.621612] lsm303dlh_acc_sysfs accelerometer driver: init
  319. <6>[    1.621704] lsm303dlh_acc_sysfs: probe start.
  320. <6>[    1.621765] lsm303dlh_acc_sysfs: hw init start
  321. <6>[    1.622619] lsm303dlh_acc_sysfs: hw init done
  322. <6>[    1.623107] input: lsm303dlh_acc_sysfs as /devices/i2c-0/0-0018/input/input3
  323. <6>[    1.623474] lsm303dlh_acc_sysfs 0-0018: lsm303dlh_acc_sysfs: probed
  324. <4>[    1.623596] i2c-core: driver [lsm303dlh_acc_sysfs] using legacy suspend method
  325. <4>[    1.623687] i2c-core: driver [lsm303dlh_acc_sysfs] using legacy resume method
  326. <6>[    1.625854] input: isl29023 light sensor as /devices/virtual/input/input4
  327. <6>[    1.626220] isl29023 0-0044: driver version 1.0 enabled
  328. <4>[    1.626342] i2c-core: driver [isl29023] using legacy suspend method
  329. <4>[    1.626403] i2c-core: driver [isl29023] using legacy resume method
  330. <6>[    1.626525] i2c i2c-0: mpu3050: +lsm303dlha
  331. <6>[    1.626586] i2c i2c-0: mpu3050: +lsm303dlhm
  332. <4>[    1.626647] i2c i2c-0: WARNING: Compass irq not assigned
  333. <4>[    1.626708] i2c i2c-0: mpu3050: No Pressure Present
  334. <6>[    1.640747] i2c i2c-0: Installing irq using 381
  335. <6>[    1.640808] i2c i2c-0: Module Param interface = mpuirq
  336. <4>[    1.641265] i2c-core: driver [mpu3050] using legacy suspend method
  337. <4>[    1.641357] i2c-core: driver [mpu3050] using legacy resume method
  338. <7>[    1.641448] mpu_init
  339. <6>[    1.642517] using rtc device, pm8xxx_rtc, for alarms
  340. <6>[    1.642608] rtc-pm8xxx rtc-pm8xxx: rtc core: registered pm8xxx_rtc as rtc0
  341. <6>[    1.642913] i2c /dev entries driver
  342. <6>[    1.644042] Linux video capture interface: v2.00
  343. <6>[    1.644195] usbcore: registered new interface driver uvcvideo
  344. <6>[    1.644287] USB Video Class driver (v1.1.0)
  345. <4>[    1.644714] +++ config_camera_on_gpios_web_cam_mt9m113
  346. <4>[    1.645111] config_camera_on_gpios_web_cam_mt9m113:enable the regulator votg_lvs0 succeed
  347. <4>[    1.645782] config_camera_on_gpios_web_cam_mt9m113:enable the regulator votg_vreg_l11 succeed
  348. <4>[    1.645904] --- config_camera_on_gpios_web_cam_mt9m113
  349. <4>[    1.712280] +++ config_camera_off_gpios_web_cam_mt9m113
  350. <4>[    1.712615] config_camera_off_gpios_web_cam_mt9m113:disable the regulator: votg_lvs0 succeed
  351. <4>[    1.713012] config_camera_off_gpios_web_cam_mt9m113:disable the regulator: votg_vreg_l11 succeed
  352. <4>[    1.713134] --- config_camera_off_gpios_web_cam_mt9m113
  353. <6>[    1.713226] msm_sync_init: initialized mt9m113
  354. <6>[    1.714233] msm_gemini_init gemini: success
  355. <6>[    1.714508] max8903b driver registeration! rc = 0
  356. <5>[    1.729400] tsens_tm_probe: OK
  357. <6>[    1.729827] device-mapper: uevent: version 1.0.3
  358. <6>[    1.730346] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
  359. <6>[    1.730560] Bluetooth: MSM Sleep Mode Driver Ver 1.1
  360. <6>[    1.731201] cpuidle: using governor ladder
  361. <6>[    1.731262] cpuidle: using governor menu
  362. <6>[    1.731689] mmc0: mci-version: 0
  363. <3>[    1.731811] mmc0: No card detect facilities available
  364. <6>[    1.732147] mmc0: Qualcomm MSM SDCC-core at 0x0000000012400000 irq 136,0 dma 18 dmacrcri 1
  365. <6>[    1.732269] mmc0: 8 bit data mode enabled
  366. <6>[    1.732299] mmc0: 4 bit data mode disabled
  367. <6>[    1.732360] mmc0: polling status mode disabled
  368. <6>[    1.732452] mmc0: MMC clock 400000 -> 48000000 Hz, PCLK 0 Hz
  369. <6>[    1.732513] mmc0: Slot eject status = 0
  370. <6>[    1.732574] mmc0: Power save feature enable = 1
  371. <6>[    1.732635] mmc0: DM non-cached buffer at ffda0000, dma_addr 0x74040000
  372. <6>[    1.732727] mmc0: DM cmd busaddr 0x74040000, cmdptr busaddr 0x74057f40
  373. <6>[    1.733428] mmc1: mci-version: 0
  374. <3>[    1.734680] mmc1: No card detect facilities available
  375. <6>[    1.734924] mmc1: Qualcomm MSM SDCC-core at 0x00000000121c0000 irq 133,0 dma 21 dmacrcri 5
  376. <6>[    1.735015] mmc1: 8 bit data mode disabled
  377. <6>[    1.735107] mmc1: 4 bit data mode enabled
  378. <6>[    1.735137] mmc1: polling status mode disabled
  379. <6>[    1.735198] mmc1: MMC clock 400000 -> 48000000 Hz, PCLK 0 Hz
  380. <6>[    1.735290] mmc1: Slot eject status = 0
  381. <6>[    1.735321] mmc1: Power save feature enable = 1
  382. <6>[    1.735412] mmc1: DM non-cached buffer at ffd80000, dma_addr 0x74060000
  383. <6>[    1.735504] mmc1: DM cmd busaddr 0x74060000, cmdptr busaddr 0x74077f40
  384. <4>[    1.735626] tenderloin_probe_wifi: id 4 mmc b5992000
  385. <7>[    1.736083] LM8502 module init called
  386. <7>[    1.736175] LM8502 probe called
  387. <4>[    1.829345] msm_otg_sm_work 1819 id=1 OTG_STATE_UNDEFINED
  388. <3>[    1.836944] qup_i2c qup_i2c.3: QUP: I2C status flags :0x1343c8, irq:193
  389. <3>[    1.837066] qup_i2c qup_i2c.3: I2C slave addr:0x33 not connected
  390. <3>[    1.837127] Unable to read LM8502 registers
  391. <7>[    1.839538] Registered led device: core_navi_left
  392. <7>[    1.840393] Registered led device: core_navi_right
  393. <4>[    1.841918] i2c-core: driver [LM8502] using legacy suspend method
  394. <4>[    1.841979] i2c-core: driver [LM8502] using legacy resume method
  395. <6>[    1.843475] usbcore: registered new interface driver usbhid
  396. <6>[    1.843536] usbhid: USB HID core driver
  397. <6>[    1.844207] logger: created 512K log 'log_main'
  398. <6>[    1.844390] logger: created 256K log 'log_events'
  399. <6>[    1.844573] logger: created 512K log 'log_radio'
  400. <6>[    1.844757] logger: created 256K log 'log_system'
  401. <6>[    1.845428] zram: Created 1 device(s) ...
  402. <6>[    1.845977] usbcore: registered new interface driver snd-usb-audio
  403. <6>[    1.846984] msm-cpu-dai msm-cpu-dai.0: asoc_msm_cpu_probe: dev name msm-cpu-dai.0
  404. <6>[    1.847229] msm-codec-dai msm-codec-dai.0: asoc_msm_codec_probe: dev name msm-codec-dai.0
  405. <6>[    1.847473] msm-dsp-audio msm-dsp-audio.0: msm_pcm_probe: dev name msm-dsp-audio.0
  406. <3>[    1.847991] wm8994_resume: CALLED
  407. <3>[    1.848022] msm_wm8958_setup_power: codec power setup
  408. <3>[    1.848114] wm8994_ldo_power: Power up the WM8994 LDOs
  409. <6>[    1.863311] mmc0: new high speed MMC card at address 0001
  410. <6>[    1.863861] mmcblk0: mmc0:0001 SEM16G 14.8 GiB
  411. <6>[    1.864135] mmcblk0boot0: mmc0:0001 SEM16G partition 1 1.00 MiB
  412. <6>[    1.864440] mmcblk0boot1: mmc0:0001 SEM16G partition 2 1.00 MiB
  413. <6>[    1.870605] a6_update_connected_ps: ac=0 usb=0 dock=0 (a6_charger_event)
  414. <6>[    1.870697] max8903b_current_setup: ### CHARGE_DISABLE
  415. <6>[    1.871429] msm_otg_suspend: usb in low power mode
  416. <6>[    1.872283]  mmcblk0: p1 p2 p3 p4 < p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 >
  417. <6>[    1.879577]  mmcblk0boot1: unknown partition table
  418. <6>[    1.881958]  mmcblk0boot0: unknown partition table
  419. <6>[    2.116394] Headphone switch initialized, plugged=0
  420. <6>[    2.120056] asoc: wm8994-aif1 <-> msm-cpu-dai.0 mapping ok
  421. <6>[    2.121246] asoc: wm8994-aif2 <-> msm-cpu-dai.0 mapping ok
  422. <6>[    2.122192] input: msm-audio headset as /devices/platform/soc-audio/sound/card0/input5
  423. <6>[    2.122741] mvs-cpu-dai mvs-cpu-dai.0: asoc_mvs_cpu_probe: dev name mvs-cpu-dai.0
  424. <6>[    2.122985] mvs-codec-dai mvs-codec-dai.0: asoc_mvs_codec_probe: dev name mvs-codec-dai.0
  425. <6>[    2.123229] msm-mvs-audio msm-mvs-audio.0: msm_pcm_probe: dev name msm-mvs-audio.0
  426. <6>[    2.124328] ALSA device list:
  427. <6>[    2.124359]   #0: msm-audio
  428. <6>[    2.124694] oprofile: using arm/armv7-scorpionmp
  429. <6>[    2.124847] GACT probability NOT on
  430. <6>[    2.124908] Mirror/redirect action on
  431. <6>[    2.124969] u32 classifier
  432. <6>[    2.125000]     Actions configured
  433. <6>[    2.125061] Netfilter messages via NETLINK v0.30.
  434. <6>[    2.125183] nf_conntrack version 0.5.0 (12885 buckets, 51540 max)
  435. <6>[    2.125640] ctnetlink v0.93: registering with nfnetlink.
  436. <6>[    2.125762] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
  437. <6>[    2.125854] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
  438. <6>[    2.126464] xt_time: kernel timezone is -0000
  439. <6>[    2.126678] ip_tables: (C) 2000-2006 Netfilter Core Team
  440. <6>[    2.126953] arp_tables: (C) 2002 David S. Miller
  441. <6>[    2.127075] TCP cubic registered
  442. <6>[    2.127136] Initializing XFRM netlink socket
  443. <6>[    2.127655] NET: Registered protocol family 10
  444. <6>[    2.128692] Mobile IPv6
  445. <6>[    2.128753] ip6_tables: (C) 2000-2006 Netfilter Core Team
  446. <6>[    2.128936] IPv6 over IPv4 tunneling driver
  447. <6>[    2.129821] NET: Registered protocol family 17
  448. <6>[    2.129882] NET: Registered protocol family 15
  449. <6>[    2.130004] L2TP core driver, V2.0
  450. <6>[    2.130035] PPPoL2TP kernel driver, V2.0
  451. <6>[    2.130096] L2TP IP encapsulation support (L2TPv3)
  452. <6>[    2.130310] L2TP netlink interface
  453. <6>[    2.130371] NET: Registered protocol family 35
  454. <5>[    2.130493] Registering the dns_resolver key type
  455. <6>[    2.130584] VFP support v0.3: implementor 51 architecture 64 part 2d variant 0 rev 0
  456. <5>[    2.130737] Registering SWP/SWPB emulation handler
  457. <6>[    2.139556] clock_late_init() disabled 202 unused clocks
  458. <6>[    2.140258] cpufreq: cpu0 init at 1512000 switching to 1188000
  459. <6>[    2.141143] cpufreq: cpu1 init at 1512000 switching to 1188000
  460. <6>[    2.145996] MSM Watchdog Initialized
  461. <6>[    2.147033] msm_hotplug: Device init
  462. <3>[    2.147094] set_dload_mode <0> ( 800154E8 )
  463. <6>[    2.148284] rtc-pm8xxx rtc-pm8xxx: setting system clock to 2016-02-18 13:39:00 UTC (1455802740)
  464. <6>[    2.148406] msm_v4l2: msm_v4l2_init
  465. <4>[    2.148834] Warning: unable to open an initial console.
  466. <6>[    2.149261] Freeing init memory: 308K
  467. <7>[    2.155487] SELinux: 512 avtab hash slots, 1334 rules.
  468. <7>[    2.156188] SELinux: 512 avtab hash slots, 1334 rules.
  469. <7>[    2.156280] SELinux:  1 users, 2 roles, 289 types, 1 bools, 1 sens, 1024 cats
  470. <7>[    2.156372] SELinux:  84 classes, 1334 rules
  471. <7>[    2.157379] SELinux:  Completing initialization.
  472. <7>[    2.157440] SELinux:  Setting up existing superblocks.
  473. <7>[    2.157531] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
  474. <7>[    2.157653] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
  475. <7>[    2.158233] SELinux: initialized (dev bdev, type bdev), not configured for labeling
  476. <7>[    2.158325] SELinux: initialized (dev proc, type proc), uses genfs_contexts
  477. <7>[    2.158447] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
  478. <7>[    2.158569] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
  479. <7>[    2.165496] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
  480. <7>[    2.165618] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
  481. <7>[    2.165710] SELinux: initialized (dev anon_inodefs, type anon_inodefs), not configured for labeling
  482. <7>[    2.165832] SELinux: initialized (dev devpts, type devpts), uses transition SIDs
  483. <7>[    2.165954] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
  484. <7>[    2.166168] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
  485. <7>[    2.166290] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
  486. <5>[    2.523345] type=1403 audit(1455802740.870:2): policy loaded auid=4294967295 ses=4294967295
  487. <4>[    2.523620] SELinux: Loaded policy from /sepolicy
  488. <5>[    2.526611] type=1404 audit(1455802740.870:3): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
  489. <3>[    4.989044] healthd: wakealarm_init: timerfd_create failed
  490. <3>[    5.489746] init: cannot open '/initlogo.rle'
  491. <7>[    5.496826] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
  492. <7>[    5.498687] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
  493. <7>[    5.500732] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
  494. <7>[    5.502532] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
  495. <3>[    5.503204] android_usb: already disabled
  496. <6>[    5.516571] kjournald starting.  Commit interval 5 seconds
  497. <4>[    5.516967] EXT3-fs (mmcblk0p13): warning: maximal mount count reached, running e2fsck is recommended
  498. <6>[    5.521209] EXT3-fs (mmcblk0p13): using internal journal
  499. <6>[    5.521484] EXT3-fs (mmcblk0p13): mounted filesystem with writeback data mode
  500. <7>[    5.521820] SELinux: initialized (dev mmcblk0p13, type ext3), uses xattr
  501. <3>[    5.992797] init: Unable to open persistent property directory /data/property errno: 2
  502. <3>[    6.016662] board_cy8ctma395_vdd_enable: enable=1 isPowerOn=1
  503. <3>[    6.019775] fs_mgr: Cannot open file /etc/extra.fstab
  504. <4>[    6.033630] EXT4-fs (dm-9): warning: maximal mount count reached, running e2fsck is recommended
  505. <7>[    6.072448] EXT4-fs (dm-9): ext4_orphan_cleanup: deleting unreferenced inode 1591
  506. <7>[    6.082305] EXT4-fs (dm-9): ext4_orphan_cleanup: deleting unreferenced inode 809
  507. <6>[    6.083465] EXT4-fs (dm-9): 2 orphan inodes deleted
  508. <6>[    6.083526] EXT4-fs (dm-9): recovery complete
  509. <4>[    6.093322] CPU1: Booted secondary processor
  510. <6>[    6.111511] EXT4-fs (dm-9): mounted filesystem with ordered data mode. Opts:
  511. <7>[    6.111724] SELinux: initialized (dev dm-9, type ext4), uses xattr
  512. <6>[    6.190887] input: HPTouchpad as /devices/virtual/input/input6
  513. <3>[    6.305236] android_usb: already disabled
  514. <6>[    6.318054] adb_open
  515. <6>[    6.318115] adb_bind_config
  516. <6>[    6.983093] msmsdcc_runtime_suspend: Enter WIFI suspend
  517. <6>[    7.016876] lsm303dlh_acc_sysfs: hw init start
  518. <6>[    7.018707] lsm303dlh_acc_sysfs: hw init done
  519. <3>[    7.293548] fs_mgr: Cannot open file /etc/extra.fstab
  520. <4>[    7.313598] EXT4-fs (dm-9): warning: maximal mount count reached, running e2fsck is recommended
  521. <6>[    7.321838] EXT4-fs (dm-9): mounted filesystem with ordered data mode. Opts:
  522. <7>[    7.322082] SELinux: initialized (dev dm-9, type ext4), uses xattr
  523. <6>[    7.333343] SELinux:  Context u:object_r:media_rw_data_file:s0 is not valid (left unmapped).
  524. <6>[    7.503051] [set_pmic_backlight] backlight enabled
  525. <6>[    7.672271] EXT4-fs (dm-8): recovery complete
  526. <6>[    7.674621] EXT4-fs (dm-8): mounted filesystem with ordered data mode. Opts:
  527. <7>[    7.674865] SELinux: initialized (dev dm-8, type ext4), uses xattr
  528. <6>[    7.678466] SELinux:  Context u:object_r:recovery_cache_file:s0 is not valid (left unmapped).
  529. <4>[    7.710632] EXT4-fs (dm-9): warning: maximal mount count reached, running e2fsck is recommended
  530. <6>[    7.713439] EXT4-fs (dm-9): mounted filesystem with ordered data mode. Opts:
  531. <7>[    7.713684] SELinux: initialized (dev dm-9, type ext4), uses xattr
  532. <6>[    7.937591] SELinux:  Context u:object_r:zoneinfo_data_file:s0 is not valid (left unmapped).
  533. <4>[   11.196502] EXT4-fs (dm-9): warning: maximal mount count reached, running e2fsck is recommended
  534. <6>[   11.201812] EXT4-fs (dm-9): mounted filesystem with ordered data mode. Opts:
  535. <7>[   11.202056] SELinux: initialized (dev dm-9, type ext4), uses xattr
  536. <6>[   13.441864] EXT4-fs (dm-8): mounted filesystem with ordered data mode. Opts:
  537. <7>[   13.442108] SELinux: initialized (dev dm-8, type ext4), uses xattr
  538. <6>[   18.940399] SELinux:  Context u:object_r:dalvikcache_profiles_data_file:s0 is not valid (left unmapped).
  539. <6>[   23.402679] EXT4-fs (dm-10): mounted filesystem with ordered data mode. Opts:
  540. <7>[   23.402923] SELinux: initialized (dev dm-10, type ext4), uses xattr
  541. <6>[   23.489562] SysRq : Emergency Remount R/O
  542. <6>[   23.496368] EXT4-fs (dm-8): re-mounted. Opts: (null)
  543. <4>[   23.497467] Emergency Remount complete
  544. <4>[   23.498596] Disabling non-boot CPUs ...
  545. <0>[   23.498718] Restarting system.
  546. <4>[   23.498809]
  547. <0>[   23.498870] Restarting Linux version 3.0.101-cyanogenmod-g2231aef (jc@jc-desk1) (gcc version 4.7 (GCC) ) #1 SMP PREEMPT Mon Mar 17 02:45:12 CDT 2014
  548. <0>[   23.499176]
  549. <3>[   23.500000] set_dload_mode <0> ( 80167B08 )
  550. <3>[   23.500244] set_dload_mode <0> ( 80167B10 )
  551. <5>[   23.500457] Going down for restart now
  552. <3>[   23.500640] pm8xxx_reset_pwr_off, [1]
  553. <3>[   23.500854] pm8xxx_reset_pwr_off, [2]
  554. <3>[   23.501037] pm8xxx_reset_pwr_off, [3]
  555. <3>[   23.501281] pm8xxx_reset_pwr_off, [4]
  556. <3>[   23.501495] pm8xxx_reset_pwr_off, [5]
  557. <3>[   23.509704] pm8xxx_reset_pwr_off, [6]
  558. <3>[   23.509887] pm8xxx_reset_pwr_off, [7]
  559. <3>[   23.510101] pm8xxx_reset_pwr_off, [8]
  560. <6>[   23.510284] arch_reset: Initiating reboot via bootloader
  561.  
  562. Broadcasting: Intent { act=com.evervolv.toolbox.action.DUMPLOGCAT_FINISHED (has extras) }
  563. Broadcast completed: result=0
  564.  

Reply to "Logcat: ev_tenderloin-6.0.1-testing-2016.02.16"

Here you can reply to the paste above

Powered by Stikked