------ KERNEL LOG (dmesg) ------
t.1: 3965386ms 13029 3959473ms 12980 - 0 0 0 - 0 0 - 0 0 0 0 0(2014-01-31 05:02:42.232434426 UTC)
<4>[ 1087.127410] Freezing user space processes ...
<6>[ 1087.169921] mmc2: Deferred resume completed
<4>[ 1087.231018] (elapsed 0.10 seconds) done.
<4>[ 1087.231231] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
<6>[ 1087.288604] msm_sdcc_setup_vreg: Disabling SD slot power
<6>[ 1087.296478] mmc2: msmsdcc_pm_suspend leave
<6>[ 1087.297454] mmc1: msmsdcc_pm_suspend leave
<6>[ 1087.301666] mmc0: msmsdcc_pm_suspend leave
<6>[ 1087.302612] [SPI] msm_spi_suspend
<6>[ 1087.303558] [USB] OTG PM suspend
<6>[ 1087.304748] PM: suspend of devices complete after 52.483 msecs
<6>[ 1087.307464] PM: late suspend of devices complete after 2.041 msecs
<6>[ 1087.308105] Enabled clocks:
<6>[ 1087.308105] pll3_clk -> lpxo_clk
<6>[ 1087.308105] Enabled clock count: 1
<6>[ 1087.308105] SMEM_APPS_DEM_SLAVE_DATA: 196611s 2000000 200 0 0 0 0 0 0
<6>[ 1087.308105] msm_pm_power_collapse(): change clock rate (old rate = 245760)
<6>[ 1087.308105] [R] suspend end
<6>[ 1087.308105] [R] resume start
<6>[ 1087.308105] msm_pm_power_collapse(): restore clock rate to 245760
<6>[ 1087.308105] SMEM_APPS_DEM_SLAVE_DATA: 196611s 2000000 200 0 1 0 30000048 7 DATA5 1b
<6>[ 1087.308105] SMEM_APPS_DEM_SLAVE_DATA: 196611s 2000000 200 0 1 0 30000048 7 DATA5 1b
<6>[ 1087.308471] wakeup wake lock: SMD_DATA5
<6>[ 1087.310577] PM: early resume of devices complete after 1.097 msecs
<6>[ 1087.312164] [USB] OTG PM resume
<6>[ 1087.312774] [SPI] msm_spi_resume
<6>[ 1087.313568] mmc0: msmsdcc_pm_resume leave
<6>[ 1087.313903] mmc1: msmsdcc_pm_resume leave
<6>[ 1087.314514] mmc2: msmsdcc_pm_resume leave
<7>[ 1087.315032] [COMP][AKM8975] akm8975_resume: (m, a, t, mv) = (0x0, 0x0, 0x0, 0x0)
<6>[ 1087.327941] PM: resume of devices complete after 16.001 msecs
<4>[ 1087.329925] Restarting tasks ... done.
<6>[ 1087.351959] sleep_stat.2: 3965386ms 13029 3959473ms 12980 - 0 0 0 - 0 0 - 0 0 0 0 0(2014-01-31 05:02:43.030299209 UTC)
<6>[ 1087.352600] negate_client_stat: 0 0 3 - 0 0 0 0 0 - 0 0 270 0 0 - 0 0 270 15 0 - 0 0 0 0 0 - 0 0 0 0 0
<6>[ 1087.353240] suspend: exit suspend, ret = 0 (2014-01-31 05:02:43.031640499 UTC)
<6>[ 1087.353851] active wake lock SMD_DATA5, time left 47
<4>[ 1087.388153] mmc2: Starting deferred resume
<6>[ 1087.389190] msm_sdcc_setup_vreg: Enabling SD slot power
<7>[ 1087.550811] [COMP][AKM8975] AKECS_GetOpenStatus:
<6>[ 1087.602203] mmc2: Deferred resume completed
<6>[ 1087.821258] sleep_stat.1: 3965386ms 13029 3959473ms 12980 - 0 0 0 - 0 0 - 0 0 0 0 0(2014-01-31 05:02:43.499031045 UTC)
<4>[ 1087.821868] Freezing user space processes ... (elapsed 0.05 seconds) done.
<4>[ 1087.882324] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
<6>[ 1087.911132] msm_sdcc_setup_vreg: Disabling SD slot power
<6>[ 1087.917053] mmc2: msmsdcc_pm_suspend leave
<6>[ 1087.917541] mmc1: msmsdcc_pm_suspend leave
<6>[ 1087.917999] mmc0: msmsdcc_pm_suspend leave
<6>[ 1087.918975] [SPI] msm_spi_suspend
<6>[ 1087.919708] [USB] OTG PM suspend
<6>[ 1087.920379] PM: suspend of devices complete after 15.389 msecs
<6>[ 1087.922637] PM: late suspend of devices complete after 1.645 msecs
<6>[ 1087.923217] Enabled clocks:
<6>[ 1087.923217] pll3_clk -> lpxo_clk
<6>[ 1087.923217] Enabled clock count: 1
<6>[ 1087.923217] SMEM_APPS_DEM_SLAVE_DATA: 163843s 2000000 200 0 0 0 0 0 0
<6>[ 1087.923217] msm_pm_power_collapse(): change clock rate (old rate = 245760)
<6>[ 1087.923217] [R] suspend end
<6>[ 1087.923217] [R] resume start
<6>[ 1087.923217] msm_pm_power_collapse(): restore clock rate to 245760
<6>[ 1087.923217] SMEM_APPS_DEM_SLAVE_DATA: 163843s 2000000 200 0 8 0 30000048 7 RPCCALL 1b
<6>[ 1087.923217] SMEM_APPS_DEM_SLAVE_DATA: 163843s 2000000 200 0 8 0 30000048 7 RPCCALL 1b
<6>[ 1087.925048] PM: early resume of devices complete after 1.371 msecs
<6>[ 1087.926757] [USB] OTG PM resume
<6>[ 1087.927398] [SPI] msm_spi_resume
<6>[ 1087.928405] mmc0: msmsdcc_pm_resume leave
<6>[ 1087.928771] mmc1: msmsdcc_pm_resume leave
<6>[ 1087.929412] mmc2: msmsdcc_pm_resume leave
<7>[ 1087.929992] [COMP][AKM8975] akm8975_resume: (m, a, t, mv) = (0x0, 0x0, 0x0, 0x0)
<6>[ 1087.941192] wakeup wake lock: rpcrotuer_smd_xprt
<6>[ 1087.950195] PM: resume of devices complete after 23.711 msecs
<4>[ 1087.952026] Restarting tasks ... done.
<6>[ 1087.975708] sleep_stat.2: 3965386ms 13029 3959473ms 12980 - 0 0 0 - 0 0 - 0 0 0 0 0(2014-01-31 05:02:49.032738583 UTC)
<6>[ 1087.976409] negate_client_stat: 0 0 51 - 0 0 0 0 0 - 0 0 2566 0 37 - 0 0 2566 15 0 - 0 0 0 0 0 - 0 0 0 0 0
<6>[ 1087.977081] suspend: exit suspend, ret = 0 (2014-01-31 05:02:49.034171324 UTC)
<6>[ 1087.977478] active wake lock alarm_rtc, time left 97
<7>[ 1088.175720] [COMP][AKM8975] AKECS_GetOpenStatus:
<6>[ 1088.338256] sleep_stat.1: 3965386ms 13029 3959473ms 12980 - 0 0 0 - 0 0 - 0 0 0 0 0(2014-01-31 05:02:49.394897614 UTC)
<4>[ 1088.338439] Freezing user space processes ... mmc0: Starting deferred resume
<4>[ 1088.352478] (elapsed 0.01 seconds) done.
<6>[ 1088.379333] mmc0: Deferred resume completed
<4>[ 1088.602661] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
<6>[ 1088.657501] mmc2: msmsdcc_pm_suspend leave
<6>[ 1088.658172] mmc1: msmsdcc_pm_suspend leave
<6>[ 1088.662170] mmc0: msmsdcc_pm_suspend leave
<6>[ 1088.663330] [SPI] msm_spi_suspend
<6>[ 1088.664001] [USB] OTG PM suspend
<6>[ 1088.665039] PM: suspend of devices complete after 38.030 msecs
<6>[ 1088.667419] PM: late suspend of devices complete after 2.011 msecs
<6>[ 1088.668426] Enabled clocks:
<6>[ 1088.668426] pll3_clk -> lpxo_clk
<6>[ 1088.668426] Enabled clock count: 1
<6>[ 1088.668426] SMEM_APPS_DEM_SLAVE_DATA: 2064423s 2000000 200 0 0 0 0 0 0
<6>[ 1088.668426] msm_pm_power_collapse(): change clock rate (old rate = 245760)
<6>[ 1088.668426] [R] suspend end
<6>[ 1088.668426] [R] resume start
<6>[ 1088.668426] msm_pm_power_collapse(): restore clock rate to 245760
<6>[ 1088.668426] SMEM_APPS_DEM_SLAVE_DATA: 2064423s 2000000 200 0 4 0 30000048 7 RPCCALL 1b
<6>[ 1088.668426] SMEM_APPS_DEM_SLAVE_DATA: 2064423s 2000000 200 0 4 0 30000048 7 RPCCALL 1b
<4>[ 1088.668426] pm8058_show_resume_irq: 511 triggered
<6>[ 1088.670410] PM: early resume of devices complete after 1.371 msecs
<6>[ 1088.671630] gpio_event_input_irq_handler, irq=511, use_irq=1
<6>[ 1088.672271] wakeup wake lock: gpio_input
<6>[ 1088.673431] [USB] OTG PM resume
<6>[ 1088.673828] [SPI] msm_spi_resume
<6>[ 1088.675140] mmc0: msmsdcc_pm_resume leave
<6>[ 1088.675506] mmc1: msmsdcc_pm_resume leave
<6>[ 1088.675872] mmc2: msmsdcc_pm_resume leave
<7>[ 1088.676727] [COMP][AKM8975] akm8975_resume: (m, a, t, mv) = (0x0, 0x0, 0x0, 0x0)
<6>[ 1088.682952] gpio_keys_scan_keys: key 1-110, 3 (191) changed to 1
<6>[ 1088.683624] gpio_keys_scan_keys: OJ action key 1-272, 3 (191) changed to 1
<6>[ 1088.684448] PM: resume of devices complete after 11.335 msecs
<4>[ 1088.686309] Restarting tasks ... done.
<6>[ 1088.709747] sleep_stat.2: 4005435ms 13150 3999522ms 13101 - 0 0 0 - 0 0 - 0 0 0 0 0(2014-01-31 05:03:33.027184679 UTC)
<6>[ 1088.715545] negate_client_stat: 0 0 67 - 0 0 0 0 0 - 0 32 1383 0 28 - 0 0 1797 15 222 - 0 0 0 0 0 - 0 0 0 0 0
<6>[ 1088.715728] suspend: exit suspend, ret = 0 (2014-01-31 05:03:33.034866088 UTC)
<6>[ 1088.715911] active wake lock alarm, time left 497
<6>[ 1088.716003] active wake lock event5-1889, time left 497
<6>[ 1088.719360] microp_led_pwm_brightness_set, data[1] = 255
<7>[ 1088.721771] [LS][CM3602] lightsensor_ioctl: set value = 1
<6>[ 1088.721954] [LS][CM3602] lightsensor_enable
<7>[ 1088.722045] [LS][CM3602] lightsensor_enable: microp is suspended
<6>[ 1088.723175] [COMP] Compass enable
<6>[ 1088.739562] request_suspend_state: wakeup (3->0) at 1084127310474 (2014-01-31 05:03:33.058673233 UTC)
<7>[ 1088.739807] mddi_power(659)
<6>[ 1088.770385] gpio_event_input_irq_handler, irq=511, use_irq=1
<6>[ 1088.774078] gpio_event_input_irq_handler, irq=511, use_irq=1
<6>[ 1088.781402] gpio_keys_scan_keys: key 1-110, 3 (191) changed to 0
<6>[ 1088.781494] gpio_keys_scan_keys: OJ action key 1-272, 3 (191) changed to 0
<7>[ 1088.814910] glacier_mddi_init
<6>[ 1088.823913] [DISP] msmfb: pan_update in state(4)
<6>[ 1088.823913] [DISP] msmfb: drawing while asleep
<4>[ 1088.864959] mmc0: Starting deferred resume
<6>[ 1088.900085] mmc0: Deferred resume completed
<7>[ 1088.915893] [COMP][AKM8975] AKECS_GetOpenStatus:
<6>[ 1088.925292] [DISP] msmfb: pan_update in state(4)
<6>[ 1088.925323] [DISP] msmfb: drawing while asleep
<6>[ 1088.926666] [GSNR] Gsensor enable
<6>[ 1088.937286] [DISP] msmfb: ready, waiting for full update
<6>[ 1088.937316] atmel_ts_resume:[TP]enter
<6>[ 1088.952789] atmel_ts_resume:[TP]done
<7>[ 1088.953063] __capella_cm3602_power: Turn the capella_cm3602 power on
<6>[ 1088.953277] sleep_stat.3: 4005435ms 13150 3999522ms 13101 - 0 0 0 - 0 0 - 0 0 0 0 0(2014-01-31 05:03:33.272114056 UTC)
<3>[ 1088.953308] curcial_oj_late_resume: enter
<4>[ 1088.962860] dhd_set_suspend: Remove extra suspend setting
<7>[ 1088.992858] [COMP][AKM8975] AKECS_GetCloseStatus:
<6>[ 1089.003662] [TP]0x01 0x10 0x04 0xE0 0xBA
<6>[ 1089.008941] OpticalJoystick Device ID: 83
<6>[ 1089.010101] OJ Driver: Revision : 01
<6>[ 1089.011718] [GSNR] Gsensor enable
<6>[ 1089.012145] [TP]0x01 0x00 0x04 0xE0 0xBA
<6>[ 1089.026824] [DISP] msmfb: pan_update in state(1)
<6>[ 1089.026824] [DISP] msmfb: full update starting
<6>[ 1089.035919] [DISP] msmfb: pan_update in state(3)
<6>[ 1089.056976] [DISP] msmfb: full update completed
<6>[ 1089.057037] [DISP] msmfb: turning on panel
<7>[ 1089.057067] glacier_panel_unblank(621)
<7>[ 1089.087219] turn on backlight
<7>[ 1089.087219] set brightness = 100
<7>[ 1089.148834] set brightness = 77
<6>[ 1089.757324] [LS][CM3602] ALS value: 0x0, level: 0 #
<6>[ 1089.763977] [LS][CM3602] ALS value: 0x0, level: 0 #
<6>[ 1090.717987] [LS][CM3602] ALS value: 0x3, level: 1 #
<6>[ 1091.669464] [LS][CM3602] ALS value: 0x1, level: 0 #
<6>[ 1092.805145] [TP]S1@550,869
<6>[ 1092.821960] [VIB]vibrator_enable, Binder_1(parent:zygote): vibrates 0 msec
<6>[ 1092.823760] [VIB]vibrator_enable, Binder_1(parent:zygote): vibrates 20 msec
<6>[ 1092.825042] [ATS][set_vibration][successful]
<6>[ 1092.844512] [VIB]vibrator_timer_func
<6>[ 1092.846191] [VIB]vibrator_enable, system_server(parent:zygote): vibrates 0 msec
<6>[ 1093.001708] [TP]E1@892,789
<6>[ 1093.002868] [TP]calibration confirm with recal by position
<6>[ 1093.022796] [TP]0x01 0x10 0x04 0xE0 0xBA
<6>[ 1093.031127] [TP]0x01 0x00 0x04 0xE0 0xBA
<6>[ 1093.032043] [VIB]vibrator_enable, Binder_5(parent:zygote): vibrates 0 msec
<6>[ 1093.032684] [VIB]vibrator_enable, Binder_5(parent:zygote): vibrates 20 msec
<6>[ 1093.033569] [ATS][set_vibration][successful]
<6>[ 1093.052978] [VIB]vibrator_timer_func
<6>[ 1093.054382] [VIB]vibrator_enable, system_server(parent:zygote): vibrates 0 msec
<6>[ 1094.330200] [VIB]vibrator_enable, Binder_2(parent:zygote): vibrates 0 msec
<6>[ 1094.522827] [LS][CM3602] ALS value: 0x9, level: 3 #
<7>[ 1094.747283] set brightness = 78
<7>[ 1094.776824] set brightness = 79
<7>[ 1094.791931] set brightness = 80
<7>[ 1094.825256] set brightness = 81
<7>[ 1094.840667] set brightness = 82
<7>[ 1094.873352] set brightness = 83
<7>[ 1094.892974] set brightness = 84
<7>[ 1094.921936] set brightness = 85
<7>[ 1094.954864] set brightness = 86
<7>[ 1094.981140] set brightness = 87
<7>[ 1095.005737] set brightness = 88
<7>[ 1095.019226] set brightness = 89
<7>[ 1095.051483] set brightness = 90
<7>[ 1095.069152] set brightness = 91
<7>[ 1095.102416] set brightness = 92
<7>[ 1095.125030] set brightness = 93
<7>[ 1095.157470] set brightness = 94
<7>[ 1095.180664] set brightness = 95
<7>[ 1095.199340] set brightness = 96
<7>[ 1095.215606] set brightness = 97
<7>[ 1095.251037] set brightness = 98
<7>[ 1095.265258] set brightness = 99
<7>[ 1095.298767] set brightness = 100
<7>[ 1095.337677] set brightness = 101
<7>[ 1095.348968] set brightness = 102
<7>[ 1095.382507] set brightness = 103
<7>[ 1095.403411] set brightness = 104
<7>[ 1095.430358] set brightness = 105
<7>[ 1095.456817] set brightness = 106
<7>[ 1095.484313] set brightness = 107
<7>[ 1095.501129] set brightness = 108
<7>[ 1095.529174] set brightness = 109
<7>[ 1095.550750] set brightness = 110
<6>[ 1095.603302] [VIB]vibrator_enable, Binder_7(parent:zygote): vibrates 0 msec
<7>[ 1095.633361] set brightness = 113
<7>[ 1095.655212] set brightness = 114
<7>[ 1095.703582] set brightness = 116
<7>[ 1095.729248] set brightness = 117
<7>[ 1095.891967] set brightness = 123
<7>[ 1096.000366] set brightness = 128
<7>[ 1096.016540] set brightness = 129
<7>[ 1096.052001] set brightness = 130
<7>[ 1096.066864] set brightness = 131
<7>[ 1096.125122] set brightness = 132
<7>[ 1096.179626] set brightness = 134
<7>[ 1096.188781] set brightness = 135
<7>[ 1096.198150] set brightness = 136
<7>[ 1096.230468] set brightness = 137
<7>[ 1096.246734] set brightness = 138
<6>[ 1096.425384] [LS][CM3602] ALS value: 0x3, level: 1 #
<6>[ 1097.379577] [LS][CM3602] ALS value: 0x3, level: 1 #
<6>[ 1098.328491] [LS][CM3602] ALS value: 0x0, level: 0 #
<7>[ 1101.514831] [K] __msm_rpc_read: prog = 0x30100000, procedure = 3, type = 0, xid = 19
<6>[ 1101.515014] [BATT] M2A_RPC: level_update: 47 at 1096883685697 (2014-01-31 05:03:45.814804687 UTC)
<6>[ 1101.515411] [BATT] power_supply_changed: battery at 1096883959936 (2014-01-31 05:03:45.815200811 UTC)
<6>[ 1101.517395] [BATT] ID=1, level=47, vol=3715, temp=245, batt_current=-408, chg_src=0, chg_en=0, full_bat=1400000, over_vchg=0, smem_vbus=0 at 1096886367150 (2014-01-31 05:03:45.817150959 UTC)
<6>[ 1101.518096] [BATT] ID=1, level=47, vol=3715, temp=245, batt_current=-408, chg_src=0, chg_en=0, full_bat=1400000, over_vchg=0, smem_vbus=0 at 1096886549976 (2014-01-31 05:03:45.817882264 UTC)
<6>[ 1101.518615] healthd: battery l=47 v=3 t=24.5 h=2 st=4 chg=
<7>[ 1104.455291] set brightness = 137
<7>[ 1104.488128] set brightness = 136
<7>[ 1104.520355] set brightness = 135
<7>[ 1104.536712] set brightness = 134
<7>[ 1104.577239] set brightness = 133
<7>[ 1104.585266] set brightness = 132
<7>[ 1104.618072] set brightness = 131
<7>[ 1104.632446] set brightness = 130
<7>[ 1104.664855] set brightness = 129
<7>[ 1104.682800] set brightness = 128
<7>[ 1104.715087] set brightness = 127
<7>[ 1104.731414] set brightness = 126
<7>[ 1104.763946] set brightness = 125
<7>[ 1104.780120] set brightness = 124
<7>[ 1104.815856] set brightness = 123
<7>[ 1104.845123] set brightness = 122
<7>[ 1104.861328] set brightness = 121
<7>[ 1104.893951] set brightness = 120
<7>[ 1104.911743] set brightness = 119
<7>[ 1104.942840] set brightness = 118
<7>[ 1104.959381] set brightness = 117
<7>[ 1104.993652] set brightness = 116
<6>[ 1104.994689] [LS][CM3602] ALS value: 0x17, level: 4 #
<7>[ 1105.026062] set brightness = 115
<7>[ 1105.038543] set brightness = 114
<7>[ 1105.055297] set brightness = 113
<7>[ 1105.087371] set brightness = 112
<7>[ 1105.106018] set brightness = 111
<7>[ 1105.167572] set brightness = 110
<7>[ 1105.172821] set brightness = 109
<7>[ 1105.184814] set brightness = 108
<7>[ 1105.217437] set brightness = 107
<7>[ 1105.288085] set brightness = 104
<7>[ 1105.325683] set brightness = 103
<7>[ 1105.332763] set brightness = 102
<7>[ 1105.364013] set brightness = 101
<7>[ 1105.379913] set brightness = 100
<7>[ 1105.420196] set brightness = 99
<7>[ 1105.436126] set brightness = 98
<7>[ 1105.469085] set brightness = 97
<7>[ 1105.486236] set brightness = 96
<7>[ 1105.520599] set brightness = 95
<7>[ 1105.532623] set brightness = 94
<7>[ 1105.565246] set brightness = 93
<7>[ 1105.582611] set brightness = 92
<7>[ 1105.614929] set brightness = 91
<6>[ 1105.633880] gpio_event_input_irq_handler, irq=514, use_irq=1
<6>[ 1105.645080] gpio_keys_scan_keys: key 1-9e, 6 (194) changed to 1
<7>[ 1105.654418] set brightness = 90
<7>[ 1105.678344] set brightness = 89
<7>[ 1105.693267] set brightness = 88
<7>[ 1105.723236] set brightness = 87
<7>[ 1105.738800] set brightness = 86
<7>[ 1105.769653] set brightness = 85
<7>[ 1105.786041] set brightness = 84
<6>[ 1105.798736] gpio_event_input_irq_handler, irq=514, use_irq=1
<6>[ 1105.809448] gpio_keys_scan_keys: key 1-9e, 6 (194) changed to 0
<6>[ 1105.945983] [LS][CM3602] ALS value: 0x0, level: 0 #
<7>[ 1105.954132] set brightness = 78
<7>[ 1105.967529] set brightness = 77
<6>[ 1106.807128] gpio_event_input_irq_handler, irq=514, use_irq=1
<6>[ 1106.818237] gpio_keys_scan_keys: key 1-9e, 6 (194) changed to 1
<6>[ 1106.898101] [LS][CM3602] ALS value: 0x0, level: 0 #
<6>[ 1106.961303] gpio_event_input_irq_handler, irq=514, use_irq=1
<6>[ 1106.972198] gpio_keys_scan_keys: key 1-9e, 6 (194) changed to 0
<6>[ 1107.499969] gpio_event_input_irq_handler, irq=514, use_irq=1
<6>[ 1107.510986] gpio_keys_scan_keys: key 1-9e, 6 (194) changed to 1
<6>[ 1107.663940] gpio_event_input_irq_handler, irq=514, use_irq=1
<6>[ 1107.674499] gpio_keys_scan_keys: key 1-9e, 6 (194) changed to 0
<6>[ 1112.521118] microp_led_pwm_brightness_set, data[1] = 0
<6>[ 1112.614257] [LS][CM3602] ALS value: 0x3, level: 1 #
<6>[ 1112.757019] gpio_event_input_irq_handler, irq=514, use_irq=1
<6>[ 1112.767913] gpio_keys_scan_keys: key 1-9e, 6 (194) changed to 1
<6>[ 1112.770874] microp_led_pwm_brightness_set, data[1] = 255
<6>[ 1112.940216] gpio_event_input_irq_handler, irq=514, use_irq=1
<6>[ 1112.940490] gpio_event_input_irq_handler, irq=514, use_irq=1
<6>[ 1112.951324] gpio_keys_scan_keys: key 1-9e, 6 (194) changed to 0
<6>[ 1113.564483] [LS][CM3602] ALS value: 0x1, level: 0 #
<6>[ 1114.517028] [LS][CM3602] ALS value: 0x3, level: 1 #
<6>[ 1115.469146] [LS][CM3602] ALS value: 0xE, level: 3 #
<7>[ 1116.650848] set brightness = 78
<7>[ 1116.673095] set brightness = 79
<7>[ 1116.700164] set brightness = 80
<7>[ 1116.729156] set brightness = 81
<7>[ 1116.776763] set brightness = 82
<7>[ 1116.783996] set brightness = 83
<7>[ 1116.798248] set brightness = 84
<7>[ 1116.814849] set brightness = 85
<7>[ 1116.849822] set brightness = 86
<7>[ 1116.861602] set brightness = 87
<7>[ 1116.900726] set brightness = 88
<7>[ 1116.923858] set brightness = 89
<7>[ 1116.950927] set brightness = 90
<7>[ 1116.975402] set brightness = 91
<7>[ 1117.006195] set brightness = 92
<7>[ 1117.023254] set brightness = 93
<7>[ 1117.037475] set brightness = 94
<7>[ 1117.070953] set brightness = 95
<7>[ 1117.093078] set brightness = 96
<6>[ 1117.105804] gpio_event_input_irq_handler, irq=512, use_irq=1
<6>[ 1117.116577] gpio_keys_scan_keys: key 1-66, 4 (192) changed to 1
<7>[ 1117.146728] set brightness = 98
<7>[ 1117.176544] set brightness = 99
<7>[ 1117.192047] set brightness = 100
<7>[ 1117.223449] set brightness = 101
<7>[ 1117.240386] set brightness = 102
<7>[ 1117.276306] set brightness = 103
<7>[ 1117.290985] set brightness = 104
<7>[ 1117.324554] set brightness = 105
<7>[ 1117.343078] set brightness = 106
<7>[ 1117.375030] set brightness = 107
<7>[ 1117.395111] set brightness = 108
<7>[ 1117.420837] set brightness = 109
<7>[ 1117.452056] set brightness = 110
<7>[ 1117.468292] set brightness = 111
<7>[ 1117.502746] set brightness = 112
<7>[ 1117.519622] set brightness = 113
<7>[ 1117.547821] set brightness = 114
<7>[ 1117.563995] set brightness = 115
<7>[ 1117.598815] set brightness = 116
<7>[ 1117.611450] set brightness = 117
<6>[ 1117.620605] [VIB]vibrator_enable, InputDispatcher(parent:zygote): vibrates 0 msec
<6>[ 1117.627441] [VIB]vibrator_enable, Thread-96(parent:zygote): vibrates 1 msec
<6>[ 1117.628082] [ATS][set_vibration][successful]
<6>[ 1117.628540] [VIB]vibrator_timer_func
<7>[ 1117.645843] set brightness = 118
<6>[ 1117.648956] [VIB]vibrator_enable, Thread-96(parent:zygote): vibrates 21 msec
<6>[ 1117.649658] [ATS][set_vibration][successful]
<6>[ 1117.670166] [VIB]vibrator_timer_func
<7>[ 1117.719024] set brightness = 120
<7>[ 1117.752319] set brightness = 122
<7>[ 1117.786895] set brightness = 123
<7>[ 1117.800170] set brightness = 124
<6>[ 1117.884765] gpio_event_input_irq_handler, irq=512, use_irq=1
<7>[ 1117.887054] set brightness = 125
<6>[ 1117.895355] gpio_keys_scan_keys: key 1-66, 4 (192) changed to 0
<6>[ 1118.831848] gpio_event_input_irq_handler, irq=512, use_irq=1
<6>[ 1118.843109] gpio_keys_scan_keys: key 1-66, 4 (192) changed to 1
<6>[ 1119.011993] gpio_event_input_irq_handler, irq=512, use_irq=1
<6>[ 1119.022918] gpio_keys_scan_keys: key 1-66, 4 (192) changed to 0
<6>[ 1120.230407] [LS][CM3602] ALS value: 0x1, level: 0 #
<6>[ 1121.184600] [LS][CM3602] ALS value: 0x0, level: 0 #
<7>[ 1128.301818] set brightness = 124
<7>[ 1128.307617] set brightness = 123
<7>[ 1128.324279] set brightness = 122
<7>[ 1128.345764] set brightness = 121
<7>[ 1128.393371] set brightness = 119
<7>[ 1128.421081] set brightness = 118
<7>[ 1128.439361] set brightness = 117
<7>[ 1128.473144] set brightness = 116
<7>[ 1128.489349] set brightness = 115
<7>[ 1128.531341] set brightness = 114
<7>[ 1128.549804] set brightness = 113
<7>[ 1128.577667] set brightness = 112
<7>[ 1128.593994] set brightness = 111
<7>[ 1128.635101] set brightness = 110
<7>[ 1128.646942] set brightness = 109
<7>[ 1128.680053] set brightness = 108
<7>[ 1128.701629] set brightness = 107
<7>[ 1128.734069] set brightness = 106
<7>[ 1128.767974] set brightness = 105
<7>[ 1128.768463] set brightness = 104
<7>[ 1128.810699] set brightness = 103
<7>[ 1128.822418] set brightness = 102
<7>[ 1128.855895] set brightness = 101
<7>[ 1128.877929] set brightness = 100
<7>[ 1128.908569] set brightness = 99
<7>[ 1128.943878] set brightness = 98
<7>[ 1128.966217] set brightness = 97
<7>[ 1128.972473] set brightness = 96
<7>[ 1128.987945] set brightness = 95
<7>[ 1129.024047] set brightness = 94
<6>[ 1129.050689] microp_led_pwm_brightness_set, data[1] = 0
<7>[ 1129.067260] set brightness = 93
<7>[ 1129.077362] set brightness = 92
<7>[ 1129.091491] set brightness = 91
<7>[ 1129.136444] set brightness = 90
<7>[ 1129.150115] set brightness = 89
<7>[ 1129.176147] set brightness = 88
<7>[ 1129.192047] set brightness = 87
<7>[ 1129.232910] set brightness = 86
<7>[ 1129.243591] set brightness = 85
<7>[ 1129.274749] set brightness = 84
<7>[ 1129.297454] set brightness = 83
<7>[ 1129.323394] set brightness = 82
<7>[ 1129.355499] set brightness = 81
<7>[ 1129.376617] set brightness = 80
<7>[ 1129.406158] set brightness = 79
<7>[ 1129.436401] set brightness = 78
<7>[ 1129.458740] set brightness = 77
<7>[ 1131.072052] set brightness = 76
<7>[ 1131.091003] set brightness = 72
<7>[ 1131.099212] set brightness = 69
<7>[ 1131.113983] set brightness = 66
<7>[ 1131.140930] set brightness = 62
<7>[ 1131.179626] set brightness = 59
<7>[ 1131.189849] set brightness = 53
<7>[ 1131.211425] set brightness = 49
<7>[ 1131.211547] set brightness = 46
<7>[ 1131.228210] set brightness = 43
<7>[ 1131.244476] set brightness = 39
<7>[ 1131.256591] set brightness = 37
<7>[ 1131.279968] set brightness = 33
<7>[ 1131.290374] set brightness = 30
<7>[ 1131.317993] set brightness = 27
<7>[ 1131.332702] set brightness = 23
<7>[ 1131.342712] set brightness = 20
<7>[ 1131.357116] set brightness = 17
<7>[ 1131.373504] set brightness = 14
<7>[ 1131.398223] set brightness = 10
<7>[ 1134.058166] [LS][CM3602] lightsensor_ioctl: set value = 0
<6>[ 1134.058502] [LS][CM3602] lightsensor_disable
<7>[ 1134.610900] set brightness = 0
<6>[ 1134.612731] [COMP] Compass disable
<6>[ 1134.659515] [GSNR] Gsensor disable
<6>[ 1134.705078] [VIB]vibrator_enable, system_server(parent:zygote): vibrates 0 msec
<4>[ 1134.754882] dhd_set_suspend: force extra Suspend setting
<6>[ 1134.810180] request_suspend_state: sleep (0->3) at 1130127853115 (2014-01-31 05:04:19.059215874 UTC)
<6>[ 1134.815521] [GSNR] Gsensor disable
<3>[ 1134.815704] curcial_oj_early_suspend: enter
<6>[ 1134.816314] sleep_stat.0: 4005435ms 13150 3999522ms 13101 - 0 0 0 - 0 0 - 0 0 0 0 0(2014-01-31 05:04:19.065340557 UTC)
<7>[ 1134.816497] glacier_panel_blank(611)
<7>[ 1134.816589] set brightness = 0
<7>[ 1134.816894] __capella_cm3602_power: Turn the capella_cm3602 power off
<6>[ 1134.817077] atmel_ts_suspend:[TP]enter
<6>[ 1134.818359] atmel_ts_suspend:[TP]done
<6>[ 1134.818572] [DISP] msmfb_suspend
<7>[ 1134.818664] glacier_mddi_uninit(599)
<7>[ 1134.818908] mddi_power(659)
<6>[ 1134.825683] [DISP] msmfb: pan_update in state(4)
<6>[ 1134.825714] [DISP] msmfb: drawing while asleep
<7>[ 1135.083557] [COMP][AKM8975] AKECS_GetOpenStatus:
<6>[ 1135.243560] sleep_stat.1: 4005435ms 13150 3999522ms 13101 - 0 0 0 - 0 0 - 0 0 0 0 0(2014-01-31 05:04:19.491843943 UTC)
<4>[ 1135.244140] Freezing user space processes ... (elapsed 0.02 seconds) done.
<4>[ 1135.274322] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
<6>[ 1135.302703] mmc2: msmsdcc_pm_suspend leave
<6>[ 1135.303253] mmc1: msmsdcc_pm_suspend leave
<6>[ 1135.307037] mmc0: msmsdcc_pm_suspend leave
<6>[ 1135.308166] [SPI] msm_spi_suspend
<6>[ 1135.308624] [USB] OTG PM suspend
<6>[ 1135.309478] PM: suspend of devices complete after 12.919 msecs
<6>[ 1135.311340] PM: late suspend of devices complete after 1.554 msecs
<6>[ 1135.312103] Enabled clocks:
<6>[ 1135.312103] pll3_clk -> lpxo_clk
<6>[ 1135.312103] Enabled clock count: 1
<6>[ 1135.312103] SMEM_APPS_DEM_SLAVE_DATA: 131074s 2000000 200 0 0 0 0 0 0
<6>[ 1135.312103] msm_pm_power_collapse(): change clock rate (old rate = 245760)
<6>[ 1135.312103] [R] suspend end
<6>[ 1135.312103] [R] resume start
<6>[ 1135.312103] msm_pm_power_collapse(): restore clock rate to 245760
<6>[ 1135.312103] SMEM_APPS_DEM_SLAVE_DATA: 131074s 2000000 200 0 1 0 30000048 7 DATA5 1b
<6>[ 1135.312103] SMEM_APPS_DEM_SLAVE_DATA: 131074s 2000000 200 0 1 0 30000048 7 DATA5 1b
<6>[ 1135.312438] wakeup wake lock: SMD_DATA5
<6>[ 1135.314392] PM: early resume of devices complete after 0.975 msecs
<6>[ 1135.315765] [USB] OTG PM resume
<6>[ 1135.316101] [SPI] msm_spi_resume
<6>[ 1135.317047] mmc0: msmsdcc_pm_resume leave
<6>[ 1135.317352] mmc1: msmsdcc_pm_resume leave
<6>[ 1135.317687] mmc2: msmsdcc_pm_resume leave
<7>[ 1135.318450] [COMP][AKM8975] akm8975_resume: (m, a, t, mv) = (0x0, 0x0, 0x0, 0x0)
<6>[ 1135.323425] PM: resume of devices complete after 7.831 msecs
<4>[ 1135.324981] Restarting tasks ... done.
<6>[ 1135.346160] sleep_stat.2: 4005435ms 13150 3999522ms 13101 - 0 0 0 - 0 0 - 0 0 0 0 0(2014-01-31 05:04:22.024316575 UTC)
<6>[ 1135.346801] negate_client_stat: 0 0 5 - 0 0 0 0 0 - 0 17 844 0 0 - 0 0 844 15 0 - 0 0 0 0 0 - 0 0 0 0 0
<6>[ 1135.347412] suspend: exit suspend, ret = 0 (2014-01-31 05:04:22.025596696 UTC)
<6>[ 1135.348022] active wake lock SMD_DATA5, time left 46
<7>[ 1135.545227] [COMP][AKM8975] AKECS_GetOpenStatus:
<6>[ 1136.264923] sleep_stat.1: 4005435ms 13150 3999522ms 13101 - 0 0 0 - 0 0 - 0 0 0 0 0(2014-01-31 05:04:22.941842710 UTC)
<4>[ 1136.265533] Freezing user space processes ... (elapsed 0.02 seconds) done.
<4>[ 1136.295593] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
<3>[ 1136.321258] pm_op(): platform_pm_suspend+0x0/0x5c returns -16
<3>[ 1136.321624] PM: Device alarm failed to suspend: error -16
<3>[ 1136.322204] PM: Some devices failed to suspend
<6>[ 1136.323272] PM: resume of devices complete after 0.731 msecs
<4>[ 1136.324920] Restarting tasks ... done.
<6>[ 1136.344207] sleep_stat.2: 4005435ms 13150 3999522ms 13101 - 0 0 0 - 0 0 - 0 0 0 0 0(2014-01-31 05:04:23.021007776 UTC)
<6>[ 1136.346038] negate_client_stat: 0 0 0 - 0 0 0 0 0 - 0 0 60 0 0 - 0 0 60 15 0 - 0 0 0 0 0 - 0 0 0 0 0
<6>[ 1136.346679] suspend: exit suspend, ret = -16 (2014-01-31 05:04:23.023506435 UTC)
<6>[ 1136.347015] active wake lock alarm_rtc, time left 197
<7>[ 1136.543395] [COMP][AKM8975] AKECS_GetOpenStatus:
<4>[ 1137.258636] mmc0: Starting deferred resume
<6>[ 1137.294860] mmc0: Deferred resume completed
<6>[ 1137.597320] sleep_stat.1: 4005435ms 13150 3999522ms 13101 - 0 0 0 - 0 0 - 0 0 0 0 0(2014-01-31 05:04:24.272244656 UTC)
<4>[ 1137.597503] Freezing user space processes ... (elapsed 0.01 seconds) done.
<4>[ 1137.867279] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
<6>[ 1137.905181] mmc2: msmsdcc_pm_suspend leave
<6>[ 1137.906127] mmc1: msmsdcc_pm_suspend leave
<6>[ 1137.909149] mmc0: msmsdcc_pm_suspend leave
<6>[ 1137.909912] [SPI] msm_spi_suspend
<6>[ 1137.910491] [USB] OTG PM suspend
<6>[ 1137.911376] PM: suspend of devices complete after 21.025 msecs
<6>[ 1137.913238] PM: late suspend of devices complete after 1.493 msecs
<6>[ 1137.914031] Enabled clocks:
<6>[ 1137.914031] pll3_clk -> lpxo_clk
<6>[ 1137.914031] Enabled clock count: 1
<6>[ 1137.914031] SMEM_APPS_DEM_SLAVE_DATA: 786446s 2000000 200 0 0 0 0 0 0
<6>[ 1137.914031] msm_pm_power_collapse(): change clock rate (old rate = 245760)
<6>[ 1137.914031] [R] suspend end
<6>[ 1137.914031] [R] resume start
<6>[ 1137.914031] msm_pm_power_collapse(): restore clock rate to 245760
<6>[ 1137.914031] SMEM_APPS_DEM_SLAVE_DATA: 786446s 2000000 200 0 8 0 30000048 7 RPCCALL 1b
<6>[ 1137.914031] SMEM_APPS_DEM_SLAVE_DATA: 786446s 2000000 200 0 8 0 30000048 7 RPCCALL 1b
<6>[ 1137.915893] PM: early resume of devices complete after 1.401 msecs
<6>[ 1137.918182] [USB] OTG PM resume
<6>[ 1137.918579] [SPI] msm_spi_resume
<6>[ 1137.919616] mmc0: msmsdcc_pm_resume leave
<6>[ 1137.920288] mmc1: msmsdcc_pm_resume leave
<6>[ 1137.920654] mmc2: msmsdcc_pm_resume leave
<7>[ 1137.921203] [COMP][AKM8975] akm8975_resume: (m, a, t, mv) = (0x0, 0x0, 0x0, 0x0)
<6>[ 1137.934722] wakeup wake lock: rpcrotuer_smd_xprt
<6>[ 1137.943878] PM: resume of devices complete after 25.994 msecs
<4>[ 1137.945800] Restarting tasks ... done.
<6>[ 1137.970001] sleep_stat.2: 4020246ms 13209 4014333ms 13160 - 0 0 0 - 0 0 - 0 0 0 0 0(2014-01-31 05:04:48.033498278 UTC)
<6>[ 1137.970733] negate_client_stat: 0 0 75 - 0 0 0 0 0 - 0 0 4344 0 32 - 0 0 4560 15 115 - 0 0 0 0 0 - 0 0 0 0 0
<6>[ 1137.971405] suspend: exit suspend, ret = 0 (2014-01-31 05:04:48.034961513 UTC)
<6>[ 1137.972076] active wake lock alarm_rtc, time left 97
<6>[ 1138.068267] [DISP] msmfb: pan_update in state(4)
<6>[ 1138.068267] [DISP] msmfb: drawing while asleep
<6>[ 1138.168975] [DISP] msmfb: pan_update in state(4)
<6>[ 1138.168975] [DISP] msmfb: drawing while asleep
<7>[ 1138.169860] [COMP][AKM8975] AKECS_GetOpenStatus:
<6>[ 1138.272399] [DISP] msmfb: pan_update in state(4)
<6>[ 1138.272460] [DISP] msmfb: drawing while asleep
<6>[ 1138.938598] sleep_stat.1: 4020246ms 13209 4014333ms 13160 - 0 0 0 - 0 0 - 0 0 0 0 0(2014-01-31 05:04:49.000774168 UTC)
<4>[ 1138.939300] Freezing user space processes ...
<6>[ 1138.970092] active wake lock alarm, time left 499
<4>[ 1138.971099]
<3>[ 1138.971435] Freezing of user space aborted
<4>[ 1138.971771]
<4>[ 1138.972106] Restarting tasks ... done.
<6>[ 1138.983428] sleep_stat.2: 4020246ms 13209 4014333ms 13160 - 0 0 0 - 0 0 - 0 0 0 0 0(2014-01-31 05:04:49.045567850 UTC)
<6>[ 1138.985961] negate_client_stat: 0 0 75 - 0 0 0 0 0 - 0 0 4344 0 32 - 0 0 4560 15 115 - 0 0 0 0 0 - 0 0 0 0 0
<6>[ 1138.989593] suspend: exit suspend, ret = -16 (2014-01-31 05:04:49.051540330 UTC)
<6>[ 1139.032806] sleep_stat.1: 4020246ms 13209 4014333ms 13160 - 0 0 0 - 0 0 - 0 0 0 0 0(2014-01-31 05:04:49.094901650 UTC)
<4>[ 1139.032989] Freezing user space processes ... (elapsed 0.01 seconds) done.
<4>[ 1139.048980] Freezing remaining freezable tasks ... (elapsed 0.02 seconds) done.
<6>[ 1139.077514] mmc2: msmsdcc_pm_suspend leave
<6>[ 1139.077972] mmc1: msmsdcc_pm_suspend leave
<6>[ 1139.078887] mmc0: msmsdcc_pm_suspend leave
<6>[ 1139.080871] [SPI] msm_spi_suspend
<6>[ 1139.081481] [USB] OTG PM suspend
<6>[ 1139.081817] PM: suspend of devices complete after 11.183 msecs
<6>[ 1139.083435] PM: late suspend of devices complete after 1.340 msecs
<6>[ 1139.083831] Enabled clocks:
<6>[ 1139.083831] pll1_clk -> tcxo_clk
<6>[ 1139.083831] Enabled clock count: 1
<6>[ 1139.083831] SMEM_APPS_DEM_SLAVE_DATA: 2916407s 2000000 200 0 0 0 0 0 0
<6>[ 1139.083831] msm_pm_power_collapse(): change clock rate (old rate = 768000)
<6>[ 1139.083831] [R] suspend end
<6>[ 1139.083831] [R] resume start
<6>[ 1139.083831] msm_pm_power_collapse(): restore clock rate to 768000
<6>[ 1139.083831] SMEM_APPS_DEM_SLAVE_DATA: 2916407s 2000000 200 0 1 0 30000048 7 DATA5 1b
<6>[ 1139.083831] SMEM_APPS_DEM_SLAVE_DATA: 2916407s 2000000 200 0 1 0 30000048 7 DATA5 1b
<6>[ 1139.083984] wakeup wake lock: SMD_DATA5
<6>[ 1139.084930] PM: early resume of devices complete after 0.487 msecs
<6>[ 1139.085723] [USB] OTG PM resume
<6>[ 1139.085937] [SPI] msm_spi_resume
<6>[ 1139.086395] mmc0: msmsdcc_pm_resume leave
<6>[ 1139.086517] mmc1: msmsdcc_pm_resume leave
<6>[ 1139.086730] mmc2: msmsdcc_pm_resume leave
<7>[ 1139.086914] [COMP][AKM8975] akm8975_resume: (m, a, t, mv) = (0x0, 0x0, 0x0, 0x0)
<6>[ 1139.098114] PM: resume of devices complete after 12.432 msecs
<4>[ 1139.098724] Restarting tasks ... done.
<6>[ 1139.109619] sleep_stat.2: 4020246ms 13209 4014333ms 13160 - 0 0 0 - 0 0 - 0 0 0 0 0(2014-01-31 05:04:50.015632069 UTC)
<6>[ 1139.109771] negate_client_stat: 0 0 2 - 0 0 0 0 0 - 0 0 310 0 0 - 0 0 310 15 0 - 0 0 0 0 0 - 0 0 0 0 0
<6>[ 1139.109985] suspend: exit suspend, ret = 0 (2014-01-31 05:04:50.016028253 UTC)
<6>[ 1139.110229] active wake lock SMD_DATA5, time left 47
<4>[ 1139.123962] mmc0: Starting deferred resume
<6>[ 1139.160400] mmc0: Deferred resume completed
<7>[ 1139.190002] [COMP][AKM8975] AKECS_GetOpenStatus:
<6>[ 1139.579681] sleep_stat.1: 4020246ms 13209 4014333ms 13160 - 0 0 0 - 0 0 - 0 0 0 0 0(2014-01-31 05:04:50.485046480 UTC)
<4>[ 1139.580322] Freezing user space processes ... (elapsed 0.05 seconds) done.
<4>[ 1139.879974] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
<6>[ 1139.921203] mmc2: msmsdcc_pm_suspend leave
<6>[ 1139.921783] mmc1: msmsdcc_pm_suspend leave
<6>[ 1139.925628] mmc0: msmsdcc_pm_suspend leave
<6>[ 1139.926605] [SPI] msm_spi_suspend
<6>[ 1139.927124] [USB] OTG PM suspend
<6>[ 1139.927764] PM: suspend of devices complete after 24.164 msecs
<6>[ 1139.930053] PM: late suspend of devices complete after 1.645 msecs
<6>[ 1139.930877] Enabled clocks:
<6>[ 1139.930877] pll3_clk -> lpxo_clk
<6>[ 1139.930877] Enabled clock count: 1
<6>[ 1139.930877] SMEM_APPS_DEM_SLAVE_DATA: 2883638s 2000000 200 0 0 0 0 0 0
<6>[ 1139.930877] msm_pm_power_collapse(): change clock rate (old rate = 245760)
<6>[ 1139.930877] [R] suspend end
<6>[ 1139.930877] [R] resume start
<6>[ 1139.930877] msm_pm_power_collapse(): restore clock rate to 245760
<6>[ 1139.930877] SMEM_APPS_DEM_SLAVE_DATA: 2883638s 2000000 200 0 8 0 30000048 7 RPCCALL 1b
<6>[ 1139.930877] SMEM_APPS_DEM_SLAVE_DATA: 2883638s 2000000 200 0 8 0 30000048 7 RPCCALL 1b
<6>[ 1139.932708] PM: early resume of devices complete after 1.371 msecs
<6>[ 1139.934417] [USB] OTG PM resume
<6>[ 1139.935089] [SPI] msm_spi_resume
<6>[ 1139.936096] mmc0: msmsdcc_pm_resume leave
<6>[ 1139.936462] mmc1: msmsdcc_pm_resume leave
<6>[ 1139.937103] mmc2: msmsdcc_pm_resume leave
<7>[ 1139.937683] [COMP][AKM8975] akm8975_resume: (m, a, t, mv) = (0x0, 0x0, 0x0, 0x0)
<6>[ 1139.946411] wakeup wake lock: rpcrotuer_smd_xprt
<6>[ 1139.955322] PM: resume of devices complete after 21.179 msecs
<4>[ 1139.957244] Restarting tasks ... done.
<6>[ 1139.981903] sleep_stat.2: 4093736ms 13459 4087823ms 13410 - 0 0 0 - 0 0 - 0 0 0 0 0(2014-01-31 05:06:19.033738850 UTC)
<6>[ 1139.982727] negate_client_stat: 0 0 195 - 0 0 0 0 0 - 0 42 6072 0 96 - 0 0 6983 15 493 - 0 0 0 0 0 - 0 0 0 0 0
<6>[ 1139.983428] suspend: exit suspend, ret = 0 (2014-01-31 05:06:19.035293537 UTC)
<6>[ 1139.983825] active wake lock alarm, time left 497
<6>[ 1140.124755] sleep_stat.1: 4093736ms 13459 4087823ms 13410 - 0 0 0 - 0 0 - 0 0 0 0 0(2014-01-31 05:06:19.176451819 UTC)
<4>[ 1140.124938] Freezing user space processes ... (elapsed 0.01 seconds) done.
<4>[ 1140.140838] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
<6>[ 1140.165679] mmc2: msmsdcc_pm_suspend leave
<6>[ 1140.165924] mmc1: msmsdcc_pm_suspend leave
<6>[ 1140.166229] mmc0: msmsdcc_pm_suspend leave
<6>[ 1140.166503] [SPI] msm_spi_suspend
<6>[ 1140.166931] [USB] OTG PM suspend
<6>[ 1140.167205] PM: suspend of devices complete after 5.638 msecs
<6>[ 1140.167877] PM: late suspend of devices complete after 0.548 msecs
<6>[ 1140.168121] Enabled clocks:
<6>[ 1140.168121] pll2_clk -> tcxo_clk
<6>[ 1140.168121] Enabled clock count: 1
<6>[ 1140.168121] SMEM_APPS_DEM_SLAVE_DATA: 1900580s 2000000 200 0 0 0 0 0 0
<6>[ 1140.168121] msm_pm_power_collapse(): change clock rate (old rate = 1024000)
<6>[ 1140.168121] [R] suspend end
<6>[ 1140.168121] [R] resume start
<6>[ 1140.168121] msm_pm_power_collapse(): restore clock rate to 1024000
<6>[ 1140.168121] SMEM_APPS_DEM_SLAVE_DATA: 1900580s 2000000 200 0 1 0 30000048 7 DATA5 1b
<6>[ 1140.168121] SMEM_APPS_DEM_SLAVE_DATA: 1900580s 2000000 200 0 1 0 30000048 7 DATA5 1b
<6>[ 1140.168243] wakeup wake lock: SMD_DATA5
<6>[ 1140.169006] PM: early resume of devices complete after 0.396 msecs
<6>[ 1140.169647] [USB] OTG PM resume
<6>[ 1140.169738] [SPI] msm_spi_resume
<6>[ 1140.170227] mmc0: msmsdcc_pm_resume leave
<6>[ 1140.170318] mmc1: msmsdcc_pm_resume leave
<6>[ 1140.170410] mmc2: msmsdcc_pm_resume leave
<7>[ 1140.170654] [COMP][AKM8975] akm8975_resume: (m, a, t, mv) = (0x0, 0x0, 0x0, 0x0)
<6>[ 1140.183258] PM: resume of devices complete after 13.653 msecs
<4>[ 1140.183837] Restarting tasks ...
<7>[ 1140.189117] [COMP][AKM8975] AKECS_GetOpenStatus:
<4>[ 1140.192382] done.
<6>[ 1140.192565] sleep_stat.2: 4093736ms 13459 4087823ms 13410 - 0 0 0 - 0 0 - 0 0 0 0 0(2014-01-31 05:06:20.013136415 UTC)
<6>[ 1140.192779] negate_client_stat: 0 0 0 - 0 0 0 0 0 - 0 0 357 0 0 - 0 0 357 15 0 - 0 0 0 0 0 - 0 0 0 0 0
<6>[ 1140.192932] suspend: exit suspend, ret = 0 (2014-01-31 05:06:20.013502174 UTC)
<6>[ 1140.193145] active wake lock SMD_DATA5, time left 49
<6>[ 1140.690856] sleep_stat.1: 4093736ms 13459 4087823ms 13410 - 0 0 0 - 0 0 - 0 0 0 0 0(2014-01-31 05:06:20.510781787 UTC)
<4>[ 1140.691497] Freezing user space processes ... (elapsed 0.04 seconds) done.
<4>[ 1140.741943] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
<6>[ 1140.772308] mmc2: msmsdcc_pm_suspend leave
<6>[ 1140.772888] mmc1: msmsdcc_pm_suspend leave
<6>[ 1140.773437] mmc0: msmsdcc_pm_suspend leave
<6>[ 1140.774322] [SPI] msm_spi_suspend
<6>[ 1140.774780] [USB] OTG PM suspend
<6>[ 1140.775634] PM: suspend of devices complete after 11.061 msecs
<6>[ 1140.777618] PM: late suspend of devices complete after 1.615 msecs
<6>[ 1140.778411] Enabled clocks:
<6>[ 1140.778411] pll3_clk -> lpxo_clk
<6>[ 1140.778411] Enabled clock count: 1
<6>[ 1140.778411] SMEM_APPS_DEM_SLAVE_DATA: 7798931s 2000000 200 0 0 0 0 0 0
<6>[ 1140.778411] msm_pm_power_collapse(): change clock rate (old rate = 245760)
<6>[ 1140.778411] [R] suspend end
<6>[ 1140.778411] [R] resume start
<6>[ 1140.778411] msm_pm_power_collapse(): restore clock rate to 245760
<6>[ 1140.778411] SMEM_APPS_DEM_SLAVE_DATA: 7798931s 2000000 200 0 4 0 30000048 7 RPCCALL 1b
<6>[ 1140.778411] SMEM_APPS_DEM_SLAVE_DATA: 7798931s 2000000 200 0 4 0 30000048 7 RPCCALL 1b
<4>[ 1140.778411] pm8058_show_resume_irq: 511 triggered
<6>[ 1140.779907] PM: early resume of devices complete after 1.066 msecs
<6>[ 1140.781188] gpio_event_input_irq_handler, irq=511, use_irq=1
<6>[ 1140.781799] wakeup wake lock: gpio_input
<6>[ 1140.782562] [USB] OTG PM resume
<6>[ 1140.782897] [SPI] msm_spi_resume
<6>[ 1140.783935] mmc0: msmsdcc_pm_resume leave
<6>[ 1140.784271] mmc1: msmsdcc_pm_resume leave
<6>[ 1140.784606] mmc2: msmsdcc_pm_resume leave
<7>[ 1140.785400] [COMP][AKM8975] akm8975_resume: (m, a, t, mv) = (0x0, 0x0, 0x0, 0x0)
<6>[ 1140.789825] PM: resume of devices complete after 7.465 msecs
<4>[ 1140.791503] Restarting tasks ...
<6>[ 1140.792999] gpio_keys_scan_keys: key 1-110, 3 (191) changed to 0
<6>[ 1140.793914] gpio_keys_scan_keys: OJ action key 1-272, 3 (191) changed to 0
<4>[ 1140.814788] done.
<6>[ 1140.814910] sleep_stat.2: 4093736ms 13459 4087823ms 13410 - 0 0 0 - 0 0 - 0 0 0 0 0(2014-01-31 05:06:23.026544428 UTC)
<6>[ 1140.815093] negate_client_stat: 0 0 9 - 0 0 0 0 0 - 0 0 1357 0 0 - 0 0 1357 15 0 - 0 0 0 0 0 - 0 0 0 0 0
<6>[ 1140.815277] suspend: exit suspend, ret = 0 (2014-01-31 05:06:23.026910200 UTC)
<6>[ 1140.819488] sleep_stat.1: 4093736ms 13459 4087823ms 13410 - 0 0 0 - 0 0 - 0 0 0 0 0(2014-01-31 05:06:23.031086105 UTC)
<4>[ 1140.819671] Freezing user space processes ... (elapsed 0.02 seconds) done.
<4>[ 1140.841308] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
<6>[ 1140.867553] mmc2: msmsdcc_pm_suspend leave
<6>[ 1140.867828] mmc1: msmsdcc_pm_suspend leave
<6>[ 1140.868194] mmc0: msmsdcc_pm_suspend leave
<6>[ 1140.868530] [SPI] msm_spi_suspend
<6>[ 1140.868804] [USB] OTG PM suspend
<6>[ 1140.869110] PM: suspend of devices complete after 6.401 msecs
<6>[ 1140.869934] PM: late suspend of devices complete after 0.701 msecs
<6>[ 1140.870269] Enabled clocks:
<6>[ 1140.870269] pll1_clk -> tcxo_clk
<6>[ 1140.870269] Enabled clock count: 1
<6>[ 1140.870269] SMEM_APPS_DEM_SLAVE_DATA: 7700625s 2000000 200 0 0 0 0 0 0
<6>[ 1140.870269] msm_pm_power_collapse(): change clock rate (old rate = 768000)
<6>[ 1140.870269] [R] suspend end
<6>[ 1140.870269] [R] resume start
<6>[ 1140.870269] msm_pm_power_collapse(): restore clock rate to 768000
<6>[ 1140.870269] SMEM_APPS_DEM_SLAVE_DATA: 7700625s 2000000 200 0 1 0 30000048 7 DATA5 1b
<6>[ 1140.870269] SMEM_APPS_DEM_SLAVE_DATA: 7700625s 2000000 200 0 1 0 30000048 7 DATA5 1b
<6>[ 1140.870452] wakeup wake lock: SMD_DATA5
<6>[ 1140.871307] PM: early resume of devices complete after 0.518 msecs
<6>[ 1140.872161] [USB] OTG PM resume
<6>[ 1140.872283] [SPI] msm_spi_resume
<6>[ 1140.872802] mmc0: msmsdcc_pm_resume leave
<6>[ 1140.872924] mmc1: msmsdcc_pm_resume leave
<6>[ 1140.873046] mmc2: msmsdcc_pm_resume leave
<7>[ 1140.873321] [COMP][AKM8975] akm8975_resume: (m, a, t, mv) = (0x0, 0x0, 0x0, 0x0)
<6>[ 1140.879333] PM: resume of devices complete after 7.285 msecs
<4>[ 1140.880035] Restarting tasks ... done.
<6>[ 1140.891845] sleep_stat.2: 4169797ms 13703 4163884ms 13654 - 0 0 0 - 0 0 - 0 0 0 0 0(2014-01-31 05:07:52.013443089 UTC)
<6>[ 1140.892059] negate_client_stat: 0 0 228 - 0 0 0 0 0 - 0 35 5360 0 103 - 0 0 6256 15 478 - 0 0 0 0 0 - 0 0 0 0 0
<6>[ 1140.892303] suspend: exit suspend, ret = 0 (2014-01-31 05:07:52.013930851 UTC)
<6>[ 1140.892547] active wake lock SMD_DATA5, time left 47
<6>[ 1140.892639] active wake lock alarm, time left 498
<7>[ 1141.013641] [COMP][AKM8975] AKECS_GetOpenStatus:
<6>[ 1141.362121] sleep_stat.1: 4169797ms 13703 4163884ms 13654 - 0 0 0 - 0 0 - 0 0 0 0 0(2014-01-31 05:07:52.483114455 UTC)
<4>[ 1141.362762] Freezing user space processes ... (elapsed 0.03 seconds) done.
<4>[ 1141.402832] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
<6>[ 1141.432861] mmc2: msmsdcc_pm_suspend leave
<6>[ 1141.433410] mmc1: msmsdcc_pm_suspend leave
<6>[ 1141.434204] mmc0: msmsdcc_pm_suspend leave
<6>[ 1141.434906] [SPI] msm_spi_suspend
<6>[ 1141.435577] [USB] OTG PM suspend
<6>[ 1141.436462] PM: suspend of devices complete after 11.214 msecs
<6>[ 1141.438446] PM: late suspend of devices complete after 1.615 msecs
<6>[ 1141.439239] Enabled clocks:
<6>[ 1141.439239] pll3_clk -> lpxo_clk
<6>[ 1141.439239] Enabled clock count: 1
<6>[ 1141.439239] SMEM_APPS_DEM_SLAVE_DATA: 4784218s 2000000 200 0 0 0 0 0 0
<6>[ 1141.439239] msm_pm_power_collapse(): change clock rate (old rate = 245760)
<6>[ 1141.439239] [R] suspend end
<6>[ 1141.439239] [R] resume start
<6>[ 1141.439239] msm_pm_power_collapse(): restore clock rate to 245760
<6>[ 1141.439239] SMEM_APPS_DEM_SLAVE_DATA: 4784218s 2000000 200 0 1 0 30000048 7 DATA5 1b
<6>[ 1141.439239] SMEM_APPS_DEM_SLAVE_DATA: 4784218s 2000000 200 0 1 0 30000048 7 DATA5 1b
<6>[ 1141.439605] wakeup wake lock: SMD_DATA5
<6>[ 1141.441802] PM: early resume of devices complete after 1.188 msecs
<6>[ 1141.443298] [USB] OTG PM resume
<6>[ 1141.443634] [SPI] msm_spi_resume
<6>[ 1141.444702] mmc0: msmsdcc_pm_resume leave
<6>[ 1141.445037] mmc1: msmsdcc_pm_resume leave
<6>[ 1141.445373] mmc2: msmsdcc_pm_resume leave
<7>[ 1141.446136] [COMP][AKM8975] akm8975_resume: (m, a, t, mv) = (0x0, 0x0, 0x0, 0x0)
<6>[ 1141.452789] PM: resume of devices complete after 9.690 msecs
<4>[ 1141.454376] Restarting tasks ... done.
<6>[ 1141.475738] sleep_stat.2: 4169797ms 13703 4163884ms 13654 - 0 0 0 - 0 0 - 0 0 0 0 0(2014-01-31 05:07:53.025326785 UTC)
<6>[ 1141.476409] negate_client_stat: 0 0 0 - 0 0 0 0 0 - 0 0 199 0 0 - 0 0 199 15 0 - 0 0 0 0 0 - 0 0 0 0 0
<6>[ 1141.477050] suspend: exit suspend, ret = 0 (2014-01-31 05:07:53.026667951 UTC)
<6>[ 1141.477661] active wake lock SMD_DATA5, time left 46
<7>[ 1141.676025] [COMP][AKM8975] AKECS_GetOpenStatus:
<6>[ 1141.932586] sleep_stat.1: 4169797ms 13703 4163884ms 13654 - 0 0 0 - 0 0 - 0 0 0 0 0(2014-01-31 05:07:53.481627591 UTC)
<4>[ 1141.933227] Freezing user space processes ... (elapsed 0.05 seconds) done.
<4>[ 1141.984252] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
<6>[ 1142.008148] mmc2: msmsdcc_pm_suspend leave
<6>[ 1142.008392] mmc1: msmsdcc_pm_suspend leave
<6>[ 1142.008636] mmc0: msmsdcc_pm_suspend leave
<6>[ 1142.009429] [SPI] msm_spi_suspend
<6>[ 1142.009674] [USB] OTG PM suspend
<6>[ 1142.009857] PM: suspend of devices complete after 6.277 msecs
<6>[ 1142.010620] PM: late suspend of devices complete after 0.578 msecs
<6>[ 1142.010803] Enabled clocks:
<6>[ 1142.010803] pll2_clk -> tcxo_clk
<6>[ 1142.010803] Enabled clock count: 1
<6>[ 1142.010803] SMEM_APPS_DEM_SLAVE_DATA: 4751450s 2000000 200 0 0 0 0 0 0
<6>[ 1142.010803] msm_pm_power_collapse(): change clock rate (old rate = 1024000)
<6>[ 1142.010803] [R] suspend end
<6>[ 1142.010803] [R] resume start
<6>[ 1142.010803] msm_pm_power_collapse(): restore clock rate to 1024000
<6>[ 1142.010803] SMEM_APPS_DEM_SLAVE_DATA: 4751450s 2000000 200 0 1 0 30000048 7 DATA5 1b
<6>[ 1142.010803] SMEM_APPS_DEM_SLAVE_DATA: 4751450s 2000000 200 0 1 0 30000048 7 DATA5 1b
<6>[ 1142.010925] wakeup wake lock: SMD_DATA5
<6>[ 1142.011596] PM: early resume of devices complete after 0.426 msecs
<6>[ 1142.012359] [USB] OTG PM resume
<6>[ 1142.012451] [SPI] msm_spi_resume
<6>[ 1142.012786] mmc0: msmsdcc_pm_resume leave
<6>[ 1142.012969] mmc1: msmsdcc_pm_resume leave
<6>[ 1142.013061] mmc2: msmsdcc_pm_resume leave
<7>[ 1142.013214] [COMP][AKM8975] akm8975_resume: (m, a, t, mv) = (0x0, 0x0, 0x0, 0x0)
<6>[ 1142.020965] PM: resume of devices complete after 8.715 msecs
<4>[ 1142.021453] Restarting tasks ... done.
<6>[ 1142.036102] sleep_stat.2: 4169797ms 13703 4163884ms 13654 - 0 0 0 - 0 0 - 0 0 0 0 0(2014-01-31 05:07:56.016150848 UTC)
<6>[ 1142.036346] negate_client_stat: 0 0 5 - 0 0 0 0 0 - 0 0 1185 0 0 - 0 0 1185 15 0 - 0 0 0 0 0 - 0 0 0 0 0
<6>[ 1142.036590] suspend: exit suspend, ret = 0 (2014-01-31 05:07:56.016668946 UTC)
<6>[ 1142.036712] active wake lock SMD_DATA5, time left 47
<7>[ 1142.234375] [COMP][AKM8975] AKECS_GetOpenStatus:
<6>[ 1142.503234] sleep_stat.1: 4169797ms 13703 4163884ms 13654 - 0 0 0 - 0 0 - 0 0 0 0 0(2014-01-31 05:07:56.482608539 UTC)
<4>[ 1142.503845] Freezing user space processes ... (elapsed 0.03 seconds) done.
<4>[ 1142.544952] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
<6>[ 1142.574340] mmc2: msmsdcc_pm_suspend leave
<6>[ 1142.575103] mmc1: msmsdcc_pm_suspend leave
<6>[ 1142.575622] mmc0: msmsdcc_pm_suspend leave
<6>[ 1142.576812] [SPI] msm_spi_suspend
<6>[ 1142.577636] [USB] OTG PM suspend
<6>[ 1142.578277] PM: suspend of devices complete after 11.184 msecs
<6>[ 1142.580230] PM: late suspend of devices complete after 1.615 msecs
<6>[ 1142.581054] Enabled clocks:
<6>[ 1142.581054] pll3_clk -> lpxo_clk
<6>[ 1142.581054] Enabled clock count: 1
<6>[ 1142.581054] SMEM_APPS_DEM_SLAVE_DATA: 4653144s 2000000 200 0 0 0 0 0 0
<6>[ 1142.581054] msm_pm_power_collapse(): change clock rate (old rate = 245760)
<6>[ 1142.581054] [R] suspend end
<6>[ 1142.581054] [R] resume start
<6>[ 1142.581054] msm_pm_power_collapse(): restore clock rate to 245760
<6>[ 1142.581054] SMEM_APPS_DEM_SLAVE_DATA: 4653144s 2000000 200 0 1 0 30000048 7 DATA5 1b
<6>[ 1142.581054] SMEM_APPS_DEM_SLAVE_DATA: 4653144s 2000000 200 0 1 0 30000048 7 DATA5 1b
<6>[ 1142.581420] wakeup wake lock: SMD_DATA5
<6>[ 1142.583618] PM: early resume of devices complete after 1.158 msecs
<6>[ 1142.585113] [USB] OTG PM resume
<6>[ 1142.585693] [SPI] msm_spi_resume
<6>[ 1142.586486] mmc0: msmsdcc_pm_resume leave
<6>[ 1142.586853] mmc1: msmsdcc_pm_resume leave
<6>[ 1142.587432] mmc2: msmsdcc_pm_resume leave
<7>[ 1142.587951] [COMP][AKM8975] akm8975_resume: (m, a, t, mv) = (0x0, 0x0, 0x0, 0x0)
<6>[ 1142.594573] PM: resume of devices complete after 9.661 msecs
<4>[ 1142.595916] Restarting tasks ... done.
<6>[ 1142.616607] sleep_stat.2: 4169797ms 13703 4163884ms 13654 - 0 0 0 - 0 0 - 0 0 0 0 0(2014-01-31 05:07:57.024018863 UTC)
<6>[ 1142.617248] negate_client_stat: 0 0 4 - 0 0 0 0 0 - 0 0 323 0 0 - 0 0 323 15 0 - 0 0 0 0 0 - 0 0 0 0 0
<6>[ 1142.617889] suspend: exit suspend, ret = 0 (2014-01-31 05:07:57.025360098 UTC)
<6>[ 1142.618499] active wake lock SMD_DATA5, time left 46
<7>[ 1142.816894] [COMP][AKM8975] AKECS_GetOpenStatus:
<6>[ 1143.074066] sleep_stat.1: 4169797ms 13703 4163884ms 13654 - 0 0 0 - 0 0 - 0 0 0 0 0(2014-01-31 05:07:57.480926569 UTC)
<4>[ 1143.074707] Freezing user space processes ... (elapsed 0.04 seconds) done.
<4>[ 1143.125366] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
<6>[ 1143.154937] mmc2: msmsdcc_pm_suspend leave
<6>[ 1143.155853] mmc1: msmsdcc_pm_suspend leave
<6>[ 1143.156616] mmc0: msmsdcc_pm_suspend leave
<6>[ 1143.157379] [SPI] msm_spi_suspend
<6>[ 1143.157897] [USB] OTG PM suspend
<6>[ 1143.158538] PM: suspend of devices complete after 11.000 msecs
<6>[ 1143.160491] PM: late suspend of devices complete after 1.645 msecs
<6>[ 1143.161315] Enabled clocks:
<6>[ 1143.161315] pll3_clk -> lpxo_clk
<6>[ 1143.161315] Enabled clock count: 1
<6>[ 1143.161315] SMEM_APPS_DEM_SLAVE_DATA: 4620375s 2000000 200 0 0 0 0 0 0
<6>[ 1143.161315] msm_pm_power_collapse(): change clock rate (old rate = 245760)
<6>[ 1143.161315] [R] suspend end
<6>[ 1143.161315] [R] resume start
<6>[ 1143.161315] msm_pm_power_collapse(): restore clock rate to 245760
<6>[ 1143.161315] SMEM_APPS_DEM_SLAVE_DATA: 4620375s 2000000 200 0 1 0 30000048 7 DATA5 1b
<6>[ 1143.161315] SMEM_APPS_DEM_SLAVE_DATA: 4620375s 2000000 200 0 1 0 30000048 7 DATA5 1b
<6>[ 1143.161682] wakeup wake lock: SMD_DATA5
<6>[ 1143.163482] PM: early resume of devices complete after 1.066 msecs
<6>[ 1143.165405] [USB] OTG PM resume
<6>[ 1143.165740] [SPI] msm_spi_resume
<6>[ 1143.166534] mmc0: msmsdcc_pm_resume leave
<6>[ 1143.167144] mmc1: msmsdcc_pm_resume leave
<6>[ 1143.167480] mmc2: msmsdcc_pm_resume leave
<7>[ 1143.168029] [COMP][AKM8975] akm8975_resume: (m, a, t, mv) = (0x0, 0x0, 0x0, 0x0)
<6>[ 1143.174865] PM: resume of devices complete after 9.690 msecs
<4>[ 1143.176483] Restarting tasks ... done.
<6>[ 1143.198394] sleep_stat.2: 4169797ms 13703 4163884ms 13654 - 0 0 0 - 0 0 - 0 0 0 0 0(2014-01-31 05:07:59.025693272 UTC)
<6>[ 1143.199066] negate_client_stat: 0 0 2 - 0 0 0 0 0 - 0 0 298 0 0 - 0 0 298 15 0 - 0 0 0 0 0 - 0 0 0 0 0
<6>[ 1143.199676] suspend: exit suspend, ret = 0 (2014-01-31 05:07:59.027034409 UTC)
<6>[ 1143.200042] active wake lock SMD_DATA5, time left 46
<7>[ 1143.397399] [COMP][AKM8975] AKECS_GetOpenStatus:
<6>[ 1143.815246] sleep_stat.1: 4169797ms 13703 4163884ms 13654 - 0 0 0 - 0 0 - 0 0 0 0 0(2014-01-31 05:07:59.641714952 UTC)
<4>[ 1143.815887] Freezing user space processes ... (elapsed 0.04 seconds) done.
<4>[ 1143.866333] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
<6>[ 1143.895812] mmc2: msmsdcc_pm_suspend leave
<6>[ 1143.896606] mmc1: msmsdcc_pm_suspend leave
<6>[ 1143.897460] mmc0: msmsdcc_pm_suspend leave
<6>[ 1143.898498] [SPI] msm_spi_suspend
<6>[ 1143.899017] [USB] OTG PM suspend
<6>[ 1143.899658] PM: suspend of devices complete after 11.214 msecs
<6>[ 1143.901885] PM: late suspend of devices complete after 1.615 msecs
<6>[ 1143.902435] Enabled clocks:
<6>[ 1143.902435] pll3_clk -> lpxo_clk
<6>[ 1143.902435] Enabled clock count: 1
<6>[ 1143.902435] SMEM_APPS_DEM_SLAVE_DATA: 4554838s 2000000 200 0 0 0 0 0 0
<6>[ 1143.902435] msm_pm_power_collapse(): change clock rate (old rate = 245760)
<6>[ 1143.902435] [R] suspend end
<6>[ 1143.902435] [R] resume start
<6>[ 1143.902435] msm_pm_power_collapse(): restore clock rate to 245760
<6>[ 1143.902435] SMEM_APPS_DEM_SLAVE_DATA: 4554838s 2000000 200 0 4 0 30000048 7 RPCCALL 1b
<6>[ 1143.902435] SMEM_APPS_DEM_SLAVE_DATA: 4554838s 2000000 200 0 4 0 30000048 7 RPCCALL 1b
<4>[ 1143.902435] pm8058_show_resume_irq: 511 triggered
<6>[ 1143.904418] PM: early resume of devices complete after 1.371 msecs
<6>[ 1143.906158] gpio_event_input_irq_handler, irq=511, use_irq=1
<6>[ 1143.906524] wakeup wake lock: gpio_input
<6>[ 1143.907501] [USB] OTG PM resume
<6>[ 1143.908111] [SPI] msm_spi_resume
<6>[ 1143.909179] mmc0: msmsdcc_pm_resume leave
<6>[ 1143.909545] mmc1: msmsdcc_pm_resume leave
<6>[ 1143.910186] mmc2: msmsdcc_pm_resume leave
<7>[ 1143.910766] [COMP][AKM8975] akm8975_resume: (m, a, t, mv) = (0x0, 0x0, 0x0, 0x0)
<6>[ 1143.917053] PM: resume of devices complete after 9.873 msecs
<6>[ 1143.917510] gpio_keys_scan_keys: key 1-110, 3 (191) changed to 1
<6>[ 1143.918151] gpio_keys_scan_keys: OJ action key 1-272, 3 (191) changed to 1
<4>[ 1143.919830] Restarting tasks ... done.
<6>[ 1143.943847] sleep_stat.2: 4183597ms 13745 4177684ms 13696 - 0 0 0 - 0 0 - 0 0 0 0 0(2014-01-31 05:08:20.028984676 UTC)
<6>[ 1143.944549] negate_client_stat: 0 0 58 - 0 0 0 0 0 - 0 11 3117 0 31 - 0 0 3270 15 76 - 0 0 0 0 0 - 0 0 0 0 0
<6>[ 1143.947326] suspend: exit suspend, ret = 0 (2014-01-31 05:08:20.032490139 UTC)
<6>[ 1143.948028] active wake lock KeyEvents
<6>[ 1143.948394] active wake lock alarm, time left 497
<6>[ 1143.958251] microp_led_pwm_brightness_set, data[1] = 255
<6>[ 1143.964111] [COMP] Compass enable
<7>[ 1143.969238] [LS][CM3602] lightsensor_ioctl: set value = 1
<6>[ 1143.969360] [LS][CM3602] lightsensor_enable
<7>[ 1143.969451] [LS][CM3602] lightsensor_enable: microp is suspended
<6>[ 1143.995147] request_suspend_state: wakeup (3->0) at 1139300251817 (2014-01-31 05:08:20.080287730 UTC)
<7>[ 1143.995361] mddi_power(659)
<6>[ 1144.037689] gpio_event_input_irq_handler, irq=511, use_irq=1
<6>[ 1144.048706] gpio_keys_scan_keys: key 1-110, 3 (191) changed to 0
<6>[ 1144.048797] gpio_keys_scan_keys: OJ action key 1-272, 3 (191) changed to 0
<7>[ 1144.070678] glacier_mddi_init
<6>[ 1144.072998] [DISP] msmfb: pan_update in state(4)
<6>[ 1144.073028] [DISP] msmfb: drawing while asleep
<7>[ 1144.143737] [COMP][AKM8975] AKECS_GetOpenStatus:
<6>[ 1144.155059] [GSNR] Gsensor enable
<6>[ 1144.167541] [DISP] msmfb: pan_update in state(4)
<6>[ 1144.167541] [DISP] msmfb: drawing while asleep
<6>[ 1144.193725] [DISP] msmfb: ready, waiting for full update
<6>[ 1144.193756] atmel_ts_resume:[TP]enter
<7>[ 1144.205627] [COMP][AKM8975] AKECS_GetCloseStatus:
<6>[ 1144.205688] atmel_ts_resume:[TP]done
<7>[ 1144.205932] __capella_cm3602_power: Turn the capella_cm3602 power on
<6>[ 1144.206146] sleep_stat.3: 4183597ms 13745 4177684ms 13696 - 0 0 0 - 0 0 - 0 0 0 0 0(2014-01-31 05:08:20.291017497 UTC)
<3>[ 1144.206146] curcial_oj_late_resume: enter
<4>[ 1144.245971] dhd_set_suspend: Remove extra suspend setting
<6>[ 1144.253234] OpticalJoystick Device ID: 83
<6>[ 1144.254150] OJ Driver: Revision : 01
<6>[ 1144.258972] [GSNR] Gsensor enable
<6>[ 1144.260070] [TP]0x01 0x10 0x04 0xE0 0xBA
<6>[ 1144.268493] [TP]0x01 0x00 0x04 0xE0 0xBA
<6>[ 1144.274810] [DISP] msmfb: pan_update in state(1)
<6>[ 1144.274810] [DISP] msmfb: full update starting
<6>[ 1144.288604] [DISP] msmfb: pan_update in state(3)
<7>[ 1144.290283] set brightness = 72
<6>[ 1144.295471] [DISP] msmfb: full update completed
<6>[ 1144.295501] [DISP] msmfb: turning on panel
<7>[ 1144.295532] glacier_panel_unblank(621)
<7>[ 1144.300048] set brightness = 75
<7>[ 1144.325805] turn on backlight
<7>[ 1144.325836] set brightness = 75
<7>[ 1144.365844] set brightness = 77
<6>[ 1145.009124] [TP]S1@572,818
<6>[ 1145.010711] [LS][CM3602] ALS value: 0x3, level: 1 #
<6>[ 1145.024139] [LS][CM3602] ALS value: 0x3, level: 1 #
<6>[ 1145.027130] [VIB]vibrator_enable, Binder_8(parent:zygote): vibrates 0 msec
<6>[ 1145.027648] [VIB]vibrator_enable, Binder_8(parent:zygote): vibrates 20 msec
<6>[ 1145.028839] [ATS][set_vibration][successful]
<6>[ 1145.047912] [VIB]vibrator_timer_func
<6>[ 1145.048492] [VIB]vibrator_enable, system_server(parent:zygote): vibrates 0 msec
<6>[ 1145.158630] [TP]E1@940,738
<6>[ 1145.159667] [TP]calibration confirm with recal by position
<6>[ 1145.179779] [TP]0x01 0x10 0x04 0xE0 0xBA
<6>[ 1145.188140] [TP]0x01 0x00 0x04 0xE0 0xBA
<6>[ 1145.195556] [VIB]vibrator_enable, Binder_B(parent:zygote): vibrates 0 msec
<6>[ 1145.196289] [VIB]vibrator_enable, Binder_B(parent:zygote): vibrates 20 msec
<6>[ 1145.197509] [ATS][set_vibration][successful]
<6>[ 1145.216888] [VIB]vibrator_timer_func
<6>[ 1145.217956] [VIB]vibrator_enable, system_server(parent:zygote): vibrates 0 msec
<4>[ 1146.997436] mmc0: Starting deferred resume
<6>[ 1147.033264] mmc0: Deferred resume completed
<6>[ 1147.880218] [LS][CM3602] ALS value: 0x3, level: 1 #
<6>[ 1148.835357] [LS][CM3602] ALS value: 0x2, level: 1 #
<6>[ 1150.741577] [LS][CM3602] ALS value: 0x2, level: 1 #
<7>[ 1151.040954] set brightness = 78
<7>[ 1151.075256] set brightness = 79
<7>[ 1151.095977] set brightness = 80
<7>[ 1151.123138] set brightness = 81
<7>[ 1151.145782] set brightness = 82
<7>[ 1151.182098] set brightness = 83
<7>[ 1151.197448] set brightness = 84
<7>[ 1151.220764] set brightness = 85
<7>[ 1151.253967] set brightness = 86
<7>[ 1151.270141] set brightness = 87
<7>[ 1151.301635] set brightness = 88
<7>[ 1151.323577] set brightness = 89
<7>[ 1151.358245] set brightness = 90
<7>[ 1151.376922] set brightness = 91
<7>[ 1151.397766] set brightness = 92
<7>[ 1151.423095] set brightness = 93
<7>[ 1151.450927] set brightness = 94
<7>[ 1151.473663] set brightness = 95
<7>[ 1151.497436] set brightness = 96
<7>[ 1151.528320] set brightness = 97
<7>[ 1151.543334] set brightness = 98
<7>[ 1151.575714] set brightness = 99
<7>[ 1151.595397] set brightness = 100
<7>[ 1151.624450] set brightness = 101
<7>[ 1151.640502] set brightness = 102
<6>[ 1151.697326] [LS][CM3602] ALS value: 0x3, level: 1 #
<6>[ 1160.725128] microp_led_pwm_brightness_set, data[1] = 0
<6>[ 1160.773681] microp_led_pwm_brightness_set, data[1] = 255
<6>[ 1165.781036] microp_led_pwm_brightness_set, data[1] = 0
<6>[ 1167.524139] microp_led_pwm_brightness_set, data[1] = 255
<6>[ 1169.987823] [VIB]vibrator_enable, dumplogcat(parent:init): vibrates 150 msec
<6>[ 1169.988128] [VIB]vibrator_enable, dumplogcat(parent:init): vibrates 75 msec
<6>[ 1169.989349] [ATS][set_vibration][successful]
<6>[ 1170.063354] [VIB]vibrator_timer_func
<6>[ 1170.113494] [VIB]vibrator_enable, dumplogcat(parent:init): vibrates 75 msec
<6>[ 1170.114532] [ATS][set_vibration][successful]
<6>[ 1170.188842] [VIB]vibrator_timer_func
<6>[ 1170.238983] [VIB]vibrator_enable, dumplogcat(parent:init): vibrates 75 msec
<6>[ 1170.240386] [ATS][set_vibration][successful]
<6>[ 1170.314483] [VIB]vibrator_timer_func
<6>[ 1171.724426] [LS][CM3602] ALS value: 0x4, level: 2 #
<7>[ 1171.762390] set brightness = 103
<7>[ 1171.791870] set brightness = 104
<7>[ 1171.818786] set brightness = 105
<7>[ 1171.824645] set brightness = 106
<7>[ 1171.842376] set brightness = 107
<7>[ 1171.875122] set brightness = 108
<7>[ 1171.909301] set brightness = 109
<7>[ 1171.992767] set brightness = 112
<7>[ 1172.012420] set brightness = 113
<7>[ 1172.029968] set brightness = 114
<7>[ 1172.262695] set brightness = 122
<7>[ 1172.281738] set brightness = 124
<7>[ 1172.311096] set brightness = 125
<7>[ 1172.328765] set brightness = 126
<7>[ 1172.363525] set brightness = 127
<7>[ 1172.393646] set brightness = 128
<7>[ 1172.413024] set brightness = 129
<6>[ 1172.674499] [LS][CM3602] ALS value: 0x4, level: 2 #
<6>[ 1183.157409] [LS][CM3602] ALS value: 0x5, level: 2 #
<6>[ 1189.022277] microp_led_pwm_brightness_set, data[1] = 0
<6>[ 1193.642822] [LS][CM3602] ALS value: 0x4, level: 2 #
<6>[ 1195.235229] gpio_event_input_irq_handler, irq=514, use_irq=1
<6>[ 1195.246459] gpio_keys_scan_keys: key 1-9e, 6 (194) changed to 1
<6>[ 1195.250122] microp_led_pwm_brightness_set, data[1] = 255
<6>[ 1195.411956] gpio_event_input_irq_handler, irq=514, use_irq=1
<6>[ 1195.412597] gpio_event_input_irq_handler, irq=514, use_irq=1
<6>[ 1195.422973] gpio_keys_scan_keys: key 1-9e, 6 (194) changed to 0
<6>[ 1197.453186] [LS][CM3602] ALS value: 0x9, level: 3 #
<7>[ 1197.472564] set brightness = 130
<7>[ 1197.503082] set brightness = 131
<7>[ 1197.529632] set brightness = 132
<7>[ 1197.553436] set brightness = 133
<7>[ 1197.571960] set brightness = 134
<7>[ 1197.595916] set brightness = 135
<7>[ 1197.624908] set brightness = 136
<7>[ 1197.657226] set brightness = 137
<7>[ 1197.673828] set brightness = 138
<7>[ 1197.705535] set brightness = 139
<7>[ 1197.721771] set brightness = 140
<7>[ 1197.754241] set brightness = 141
<7>[ 1197.770416] set brightness = 142
<7>[ 1197.802703] set brightness = 143
<7>[ 1197.818939] set brightness = 144
<7>[ 1197.851165] set brightness = 145
<7>[ 1197.883605] set brightness = 146
<7>[ 1197.899749] set brightness = 147
<7>[ 1197.938232] set brightness = 148
<7>[ 1197.948547] set brightness = 149
<7>[ 1197.981506] set brightness = 150
<7>[ 1197.997253] set brightness = 151
<7>[ 1198.029663] set brightness = 152
<7>[ 1198.049407] set brightness = 153
<7>[ 1198.081146] set brightness = 154
<7>[ 1198.097778] set brightness = 155
<7>[ 1198.130737] set brightness = 156
<7>[ 1198.153930] set brightness = 157
<7>[ 1198.186187] set brightness = 158
<7>[ 1198.195739] set brightness = 159
<6>[ 1199.151733] [VIB]vibrator_enable, dumplogcat(parent:init): vibrates 150 msec
<6>[ 1199.152526] [ATS][set_vibration][successful]
<6>[ 1199.170043] [VIB]vibrator_enable, dumplogcat(parent:init): vibrates 75 msec
<6>[ 1199.170776] [ATS][set_vibration][successful]
<6>[ 1199.245361] [VIB]vibrator_timer_func
<6>[ 1199.295532] [VIB]vibrator_enable, dumplogcat(parent:init): vibrates 75 msec
<6>[ 1199.296203] [ATS][set_vibration][successful]
<6>[ 1199.370666] [VIB]vibrator_timer_func
<6>[ 1199.420837] [VIB]vibrator_enable, dumplogcat(parent:init): vibrates 75 msec
<6>[ 1199.422027] [ATS][set_vibration][successful]
<6>[ 1199.496185] [VIB]vibrator_timer_func
<6>[ 1202.218383] [LS][CM3602] ALS value: 0x4, level: 2 #
<6>[ 1203.171600] [LS][CM3602] ALS value: 0x7, level: 3 #
<6>[ 1204.020690] [BATT] ID=1, level=47, vol=3710, temp=232, batt_current=-404, chg_src=0, chg_en=0, full_bat=1400000, over_vchg=0, smem_vbus=0 at 1199234651463 (2014-01-31 05:09:20.014474079 UTC)
<6>[ 1204.021118] [BATT] ID=1, level=47, vol=3710, temp=232, batt_current=-404, chg_src=0, chg_en=0, full_bat=1400000, over_vchg=0, smem_vbus=0 at 1199235047587 (2014-01-31 05:09:20.014900673 UTC)
<6>[ 1204.021759] healthd: battery l=47 v=3 t=23.2 h=2 st=4 chg=
<4>[ 1204.270263] mmc2: Starting deferred resume
<6>[ 1204.270507] msm_sdcc_setup_vreg: Enabling SD slot power
<6>[ 1204.477478] mmc2: Deferred resume completed
<6>[ 1211.269317] microp_led_pwm_brightness_set, data[1] = 0
<7>[ 1218.300201] set brightness = 155
<7>[ 1218.316040] set brightness = 152
<7>[ 1218.332183] set brightness = 149
<7>[ 1218.342864] set brightness = 147
<7>[ 1218.359375] set brightness = 143
<7>[ 1218.375427] set brightness = 140
<7>[ 1218.391723] set brightness = 137
<7>[ 1218.408020] set brightness = 134
<7>[ 1218.424194] set brightness = 130
<7>[ 1218.440826] set brightness = 127
<7>[ 1218.456817] set brightness = 124
<7>[ 1218.481872] set brightness = 121
<7>[ 1218.495361] set brightness = 117
<7>[ 1218.505920] set brightness = 114
<7>[ 1218.526947] set brightness = 111
<7>[ 1218.538269] set brightness = 108
<7>[ 1218.556121] set brightness = 104
<7>[ 1218.571136] set brightness = 101
<7>[ 1218.591613] set brightness = 98
<7>[ 1218.604705] set brightness = 94
<7>[ 1218.622680] set brightness = 91
<7>[ 1218.637603] set brightness = 88
<7>[ 1218.654144] set brightness = 85
<7>[ 1218.671630] set brightness = 81
<7>[ 1218.698120] set brightness = 78
<7>[ 1218.725555] set brightness = 75
<7>[ 1218.736999] set brightness = 68
<7>[ 1218.753082] set brightness = 65
<7>[ 1218.768371] set brightness = 62
<7>[ 1218.785217] set brightness = 58
<7>[ 1218.801330] set brightness = 55
<7>[ 1218.819976] set brightness = 52
<7>[ 1218.833953] set brightness = 48
<7>[ 1218.850128] set brightness = 45
<7>[ 1218.866271] set brightness = 42
<7>[ 1218.885375] set brightness = 39
<7>[ 1218.901214] set brightness = 35
<7>[ 1218.915069] set brightness = 32
<7>[ 1218.931884] set brightness = 29
<7>[ 1218.948791] set brightness = 26
<7>[ 1218.966186] set brightness = 22
<7>[ 1218.982574] set brightness = 19
<7>[ 1218.998870] set brightness = 16
<7>[ 1219.016815] set brightness = 12
<7>[ 1219.031860] set brightness = 10
<6>[ 1219.368804] [LS][CM3602] ALS value: 0x4, level: 2 #
<7>[ 1221.285766] [LS][CM3602] lightsensor_ioctl: set value = 0
<6>[ 1221.286437] [LS][CM3602] lightsensor_disable
<6>[ 1221.858612] [COMP] Compass disable
<6>[ 1221.896484] [GSNR] Gsensor disable
<6>[ 1221.929534] [VIB]vibrator_enable, system_server(parent:zygote): vibrates 0 msec
<4>[ 1222.000854] dhd_set_suspend: force extra Suspend setting
<7>[ 1222.012939] set brightness = 0
<6>[ 1222.022033] request_suspend_state: sleep (0->3) at 1217208339868 (2014-01-31 05:09:37.988375781 UTC)
<6>[ 1222.026885] [GSNR] Gsensor disable
<3>[ 1222.026977] curcial_oj_early_suspend: enter
<6>[ 1222.027252] sleep_stat.0: 4183597ms 13745 4177684ms 13696 - 0 0 0 - 0 0 - 0 0 0 0 0(2014-01-31 05:09:37.993586333 UTC)
<7>[ 1222.027404] glacier_panel_blank(611)
<7>[ 1222.027526] set brightness = 0
<7>[ 1222.027770] __capella_cm3602_power: Turn the capella_cm3602 power off
<6>[ 1222.028045] atmel_ts_suspend:[TP]enter
<6>[ 1222.029266] atmel_ts_suspend:[TP]done
<6>[ 1222.029479] [DISP] msmfb_suspend
<7>[ 1222.029663] glacier_mddi_uninit(599)
<7>[ 1222.029876] mddi_power(659)
<6>[ 1222.032196] [DISP] msmfb: pan_update in state(4)
<6>[ 1222.032196] [DISP] msmfb: drawing while asleep
<7>[ 1222.059875] [COMP][AKM8975] AKECS_GetOpenStatus:
<6>[ 1224.688293] sleep_stat.1: 4183597ms 13745 4177684ms 13696 - 0 0 0 - 0 0 - 0 0 0 0 0(2014-01-31 05:09:40.650510165 UTC)
<4>[ 1224.688934] Freezing user space processes ... (elapsed 0.04 seconds) done.
<4>[ 1224.739379] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
<6>[ 1224.770019] msm_sdcc_setup_vreg: Disabling SD slot power
<6>[ 1224.775695] mmc2: msmsdcc_pm_suspend leave
<6>[ 1224.776458] mmc1: msmsdcc_pm_suspend leave
<6>[ 1224.780639] mmc0: msmsdcc_pm_suspend leave
<6>[ 1224.782958] [SPI] msm_spi_suspend
<6>[ 1224.783752] [USB] OTG PM suspend
<6>[ 1224.784454] PM: suspend of devices complete after 22.639 msecs
<6>[ 1224.786499] PM: late suspend of devices complete after 1.645 msecs
<6>[ 1224.787353] Enabled clocks:
<6>[ 1224.787353] pll3_clk -> lpxo_clk
<6>[ 1224.787353] Enabled clock count: 1
<6>[ 1224.787353] SMEM_APPS_DEM_SLAVE_DATA: 65537s 2000000 200 0 0 0 0 0 0
<6>[ 1224.787353] msm_pm_power_collapse(): change clock rate (old rate = 245760)
<6>[ 1224.787353] [R] suspend end
<6>[ 1224.787353] [R] resume start
<6>[ 1224.787353] msm_pm_power_collapse(): restore clock rate to 245760
<6>[ 1224.787353] SMEM_APPS_DEM_SLAVE_DATA: 65537s 2000000 200 0 8 0 30000048 7 RPCCALL 1b
<6>[ 1224.787353] SMEM_APPS_DEM_SLAVE_DATA: 65537s 2000000 200 0 8 0 30000048 7 RPCCALL 1b
<6>[ 1224.788909] PM: early resume of devices complete after 1.096 msecs
<6>[ 1224.790527] [USB] OTG PM resume
<6>[ 1224.790863] [SPI] msm_spi_resume
<6>[ 1224.791625] mmc0: msmsdcc_pm_resume leave
<6>[ 1224.792236] mmc1: msmsdcc_pm_resume leave
<6>[ 1224.792602] mmc2: msmsdcc_pm_resume leave
<7>[ 1224.793121] [COMP][AKM8975] akm8975_resume: (m, a, t, mv) = (0x0, 0x0, 0x0, 0x0)
<6>[ 1224.795074] wakeup wake lock: rpcrotuer_smd_xprt
<6>[ 1224.798522] PM: resume of devices complete after 8.166 msecs
<4>[ 1224.800140] Restarting tasks ... done.
<6>[ 1224.822387] sleep_stat.2: 4183597ms 13745 4177684ms 13696 - 0 0 0 - 0 0 - 0 0 0 0 0(2014-01-31 05:09:43.025810121 UTC)
<6>[ 1224.823059] negate_client_stat: 0 0 5 - 0 0 0 0 0 - 0 0 978 0 0 - 0 0 978 15 0 - 0 0 0 0 0 - 0 0 0 0 0
<6>[ 1224.823699] suspend: exit suspend, ret = 0 (2014-01-31 05:09:43.027151200 UTC)
<6>[ 1224.824310] active wake lock alarm, time left 497
<4>[ 1224.946685] mmc0: Starting deferred resume
<6>[ 1224.983123] mmc0: Deferred resume completed
<7>[ 1225.021240] [COMP][AKM8975] AKECS_GetOpenStatus:
<6>[ 1225.190338] sleep_stat.1: 4183597ms 13745 4177684ms 13696 - 0 0 0 - 0 0 - 0 0 0 0 0(2014-01-31 05:09:43.393329598 UTC)
<4>[ 1225.190551] Freezing user space processes ... (elapsed 0.01 seconds) done.
<4>[ 1225.459289] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
<6>[ 1225.502136] mmc2: msmsdcc_pm_suspend leave
<6>[ 1225.502960] mmc1: msmsdcc_pm_suspend leave
<6>[ 1225.508300] mmc0: msmsdcc_pm_suspend leave
<6>[ 1225.509521] [SPI] msm_spi_suspend
<6>[ 1225.510040] [USB] OTG PM suspend
<6>[ 1225.510711] PM: suspend of devices complete after 28.126 msecs
<6>[ 1225.512969] PM: late suspend of devices complete after 1.645 msecs
<6>[ 1225.513549] Enabled clocks:
<6>[ 1225.513549] pll3_clk -> lpxo_clk
<6>[ 1225.513549] Enabled clock count: 1
<6>[ 1225.513549] SMEM_APPS_DEM_SLAVE_DATA: 819215s 2000000 200 0 0 0 0 0 0
<6>[ 1225.513549] msm_pm_power_collapse(): change clock rate (old rate = 245760)
<6>[ 1225.513549] [R] suspend end
<6>[ 1225.513549] [R] resume start
<6>[ 1225.513549] msm_pm_power_collapse(): restore clock rate to 245760
<6>[ 1225.513549] SMEM_APPS_DEM_SLAVE_DATA: 819215s 2000000 200 0 4 0 30000048 7 RPCCALL 1b
<6>[ 1225.513549] SMEM_APPS_DEM_SLAVE_DATA: 819215s 2000000 200 0 4 0 30000048 7 RPCCALL 1b
<4>[ 1225.513549] pm8058_show_resume_irq: 511 triggered
<6>[ 1225.515014] PM: early resume of devices complete after 1.036 msecs
<6>[ 1225.516387] gpio_event_input_irq_handler, irq=511, use_irq=1
<6>[ 1225.516723] wakeup wake lock: gpio_input
<6>[ 1225.517486] [USB] OTG PM resume
<6>[ 1225.518096] [SPI] msm_spi_resume
<6>[ 1225.518829] mmc0: msmsdcc_pm_resume leave
<6>[ 1225.519256] mmc1: msmsdcc_pm_resume leave
<6>[ 1225.519866] mmc2: msmsdcc_pm_resume leave
<7>[ 1225.520385] [COMP][AKM8975] akm8975_resume: (m, a, t, mv) = (0x0, 0x0, 0x0, 0x0)
<6>[ 1225.524932] PM: resume of devices complete after 7.648 msecs
<4>[ 1225.526275] Restarting tasks ...
<6>[ 1225.527557] gpio_keys_scan_keys: key 1-110, 3 (191) changed to 1
<6>[ 1225.528198] gpio_keys_scan_keys: OJ action key 1-272, 3 (191) changed to 1
<4>[ 1225.548156] done.
<6>[ 1225.548583] sleep_stat.2: 4183597ms 13745 4177684ms 13696 - 0 0 0 - 0 0 - 0 0 0 0 0(2014-01-31 05:09:44.025293997 UTC)
<6>[ 1225.551544] negate_client_stat: 0 0 4 - 0 0 0 0 0 - 0 0 527 0 0 - 0 0 527 15 0 - 0 0 0 0 0 - 0 0 0 0 0
<6>[ 1225.552185] suspend: exit suspend, ret = 0 (2014-01-31 05:09:44.028921170 UTC)
<6>[ 1225.552551] active wake lock KeyEvents
<6>[ 1225.561462] microp_led_pwm_brightness_set, data[1] = 255
<6>[ 1225.562561] [COMP] Compass enable
<7>[ 1225.568664] [LS][CM3602] lightsensor_ioctl: set value = 1
<6>[ 1225.568847] [LS][CM3602] lightsensor_enable
<7>[ 1225.575622] [LS][CM3602] lightsensor_enable: microp is suspended
<6>[ 1225.590667] request_suspend_state: wakeup (3->0) at 1220771671336 (2014-01-31 05:09:44.067359477 UTC)
<7>[ 1225.590881] mddi_power(659)
<6>[ 1225.639587] [DISP] msmfb: pan_update in state(4)
<6>[ 1225.639587] [DISP] msmfb: drawing while asleep
<6>[ 1225.661071] gpio_event_input_irq_handler, irq=511, use_irq=1
<6>[ 1225.662170] gpio_event_input_irq_handler, irq=511, use_irq=1
<7>[ 1225.665771] glacier_mddi_init
<6>[ 1225.671234] gpio_keys_scan_keys: key 1-110, 3 (191) changed to 0
<6>[ 1225.671234] gpio_keys_scan_keys: OJ action key 1-272, 3 (191) changed to 0
<4>[ 1225.709564] dhd_set_suspend: Remove extra suspend setting
<6>[ 1225.741455] [DISP] msmfb: pan_update in state(4)
<6>[ 1225.741455] [DISP] msmfb: drawing while asleep
<7>[ 1225.748474] [COMP][AKM8975] AKECS_GetOpenStatus:
<6>[ 1225.761840] [GSNR] Gsensor enable
<6>[ 1225.788055] [DISP] msmfb: ready, waiting for full update
<6>[ 1225.788085] atmel_ts_resume:[TP]enter
<6>[ 1225.799865] atmel_ts_resume:[TP]done
<7>[ 1225.800048] __capella_cm3602_power: Turn the capella_cm3602 power on
<6>[ 1225.800201] sleep_stat.3: 4183597ms 13745 4177684ms 13696 - 0 0 0 - 0 0 - 0 0 0 0 0(2014-01-31 05:09:44.276626554 UTC)
<3>[ 1225.800201] curcial_oj_late_resume: enter
<7>[ 1225.819915] [COMP][AKM8975] AKECS_GetCloseStatus:
<6>[ 1225.848602] OpticalJoystick Device ID: 83
<6>[ 1225.851135] OJ Driver: Revision : 01
<6>[ 1225.852722] [GSNR] Gsensor enable
<6>[ 1225.852935] [DISP] msmfb: pan_update in state(1)
<6>[ 1225.852966] [DISP] msmfb: full update starting
<6>[ 1225.854431] [TP]0x01 0x10 0x04 0xE0 0xBA
<6>[ 1225.855255] [DISP] msmfb: pan_update in state(3)
<6>[ 1225.862792] [TP]0x01 0x00 0x04 0xE0 0xBA
<6>[ 1225.872314] [DISP] msmfb: full update completed
<6>[ 1225.872344] [DISP] msmfb: turning on panel
<7>[ 1225.872375] glacier_panel_unblank(621)
<7>[ 1225.902496] turn on backlight
<7>[ 1225.902496] set brightness = 100
<7>[ 1225.952575] set brightness = 81
<7>[ 1225.975646] set brightness = 88
<7>[ 1225.995788] set brightness = 91
<7>[ 1226.021270] set brightness = 95
<7>[ 1226.031005] set brightness = 98
<7>[ 1226.048217] set brightness = 101
<7>[ 1226.058837] set brightness = 104
<7>[ 1226.068817] set brightness = 108
<7>[ 1226.095672] set brightness = 111
<7>[ 1226.108032] set brightness = 114
<7>[ 1226.120300] set brightness = 117
<7>[ 1226.136993] set brightness = 120
<7>[ 1226.156188] set brightness = 124
<7>[ 1226.173126] set brightness = 127
<7>[ 1226.189849] set brightness = 130
<6>[ 1226.604064] [LS][CM3602] ALS value: 0x4, level: 2 #
<6>[ 1226.611450] [LS][CM3602] ALS value: 0x4, level: 2 #
<6>[ 1226.803497] [TP]S1@673,801
<6>[ 1226.813232] [VIB]vibrator_enable, Binder_7(parent:zygote): vibrates 0 msec
<6>[ 1226.814025] [VIB]vibrator_enable, Binder_7(parent:zygote): vibrates 20 msec
<6>[ 1226.815612] [ATS][set_vibration][successful]
<6>[ 1226.834289] [VIB]vibrator_timer_func
<6>[ 1226.834808] [VIB]vibrator_enable, system_server(parent:zygote): vibrates 0 msec
<6>[ 1227.062866] [TP]E1@868,797
<6>[ 1227.063903] [TP]calibration confirm with recal by position
<6>[ 1227.080413] [VIB]vibrator_enable, Binder_3(parent:zygote): vibrates 0 msec
<6>[ 1227.081085] [VIB]vibrator_enable, Binder_3(parent:zygote): vibrates 20 msec
<6>[ 1227.082916] [ATS][set_vibration][successful]
<6>[ 1227.084045] [TP]0x01 0x10 0x04 0xE0 0xBA
<6>[ 1227.092346] [TP]0x01 0x00 0x04 0xE0 0xBA
<6>[ 1227.101623] [VIB]vibrator_timer_func
<6>[ 1227.102447] [VIB]vibrator_enable, system_server(parent:zygote): vibrates 0 msec
<7>[ 1227.189392] [K] __msm_rpc_read: prog = 0x30100000, procedure = 3, type = 0, xid = 20
<6>[ 1227.189514] [BATT] M2A_RPC: level_update: 46 at 1222368414909 (2014-01-31 05:09:45.663920223 UTC)
<6>[ 1227.189788] [BATT] power_supply_changed: battery at 1222368628207 (2014-01-31 05:09:45.664224934 UTC)
<6>[ 1227.202423] [BATT] ID=1, level=46, vol=3704, temp=236, batt_current=-364, chg_src=0, chg_en=0, full_bat=1400000, over_vchg=0, smem_vbus=0 at 1222381334680 (2014-01-31 05:09:45.676809523 UTC)
<6>[ 1227.202789] [BATT] ID=1, level=46, vol=3704, temp=236, batt_current=-364, chg_src=0, chg_en=0, full_bat=1400000, over_vchg=0, smem_vbus=0 at 1222381761276 (2014-01-31 05:09:45.677205648 UTC)
<6>[ 1227.203552] healthd: battery l=46 v=3 t=23.6 h=2 st=4 chg=
<6>[ 1227.566192] [LS][CM3602] ALS value: 0x7, level: 3 #
<4>[ 1229.192230] mmc2: Starting deferred resume
<6>[ 1229.192535] msm_sdcc_setup_vreg: Enabling SD slot power
<6>[ 1229.403961] mmc2: Deferred resume completed
<4>[ 1229.841278] mmc0: Starting deferred resume
<6>[ 1229.876953] mmc0: Deferred resume completed
<6>[ 1232.658721] microp_led_pwm_brightness_set, data[1] = 0
<7>[ 1233.595672] set brightness = 131
<7>[ 1233.626922] set brightness = 132
<7>[ 1233.643920] set brightness = 133
<7>[ 1233.682861] set brightness = 134
<7>[ 1233.692047] set brightness = 135
<7>[ 1233.724212] set brightness = 136
<7>[ 1233.753601] set brightness = 137
<7>[ 1233.769775] set brightness = 138
<7>[ 1233.802368] set brightness = 139
<7>[ 1233.818511] set brightness = 140
<7>[ 1233.852325] set brightness = 141
<7>[ 1233.874755] set brightness = 142
<7>[ 1233.908691] set brightness = 143
<7>[ 1233.925323] set brightness = 144
<7>[ 1233.942291] set brightness = 145
<7>[ 1233.975830] set brightness = 146
<7>[ 1233.995300] set brightness = 147
<7>[ 1234.028900] set brightness = 148
<7>[ 1234.045745] set brightness = 149
<7>[ 1234.087066] set brightness = 150
<7>[ 1234.102447] set brightness = 151
<7>[ 1234.129821] set brightness = 152
<7>[ 1234.148284] set brightness = 153
<7>[ 1234.179748] set brightness = 154
<7>[ 1234.196319] set brightness = 155
<7>[ 1234.234252] set brightness = 156
<7>[ 1234.250915] set brightness = 157
<7>[ 1234.293640] set brightness = 158
<7>[ 1234.308319] set brightness = 159
<6>[ 1235.200439] [LS][CM3602] ALS value: 0x5, level: 2 #
<6>[ 1235.365478] microp_led_pwm_brightness_set, data[1] = 255
<6>[ 1235.396179] [VIB]vibrator_enable, Binder_5(parent:zygote): vibrates 0 msec
<6>[ 1236.155731] [LS][CM3602] ALS value: 0x1, level: 0 #
<6>[ 1237.107116] [LS][CM3602] ALS value: 0x4, level: 2 #
<6>[ 1238.209289] [VIB]vibrator_enable, Binder_7(parent:zygote): vibrates 0 msec
<6>[ 1239.014801] [LS][CM3602] ALS value: 0xA, level: 3 #
<6>[ 1244.738525] [LS][CM3602] ALS value: 0x5, level: 2 #
<6>[ 1245.692413] [LS][CM3602] ALS value: 0x5, level: 2 #
<6>[ 1248.056671] [VIB]vibrator_enable, Binder_1(parent:zygote): vibrates 0 msec
<6>[ 1248.064300] [VIB]vibrator_enable, Binder_1(parent:zygote): vibrates 40 msec
<6>[ 1248.065948] [ATS][set_vibration][successful]
<6>[ 1248.104858] [VIB]vibrator_timer_func
<6>[ 1248.107269] [VIB]vibrator_enable, system_server(parent:zygote): vibrates 0 msec
<6>[ 1248.407409] [VIB]vibrator_enable, Binder_8(parent:zygote): vibrates 0 msec
<6>[ 1248.407897] [VIB]vibrator_enable, Binder_8(parent:zygote): vibrates 40 msec
<6>[ 1248.408752] [ATS][set_vibration][successful]
<6>[ 1248.448089] [VIB]vibrator_timer_func
<6>[ 1248.449127] [VIB]vibrator_enable, system_server(parent:zygote): vibrates 0 msec
<6>[ 1248.643707] [VIB]vibrator_enable, Binder_5(parent:zygote): vibrates 0 msec
<6>[ 1248.644165] [VIB]vibrator_enable, Binder_5(parent:zygote): vibrates 40 msec
<6>[ 1248.645690] [ATS][set_vibration][successful]
<6>[ 1248.684448] [VIB]vibrator_timer_func
<6>[ 1248.685546] [VIB]vibrator_enable, system_server(parent:zygote): vibrates 0 msec
<6>[ 1248.987976] [VIB]vibrator_enable, Binder_2(parent:zygote): vibrates 0 msec
<6>[ 1248.988494] [VIB]vibrator_enable, Binder_2(parent:zygote): vibrates 40 msec
<6>[ 1248.989685] [ATS][set_vibration][successful]
<6>[ 1249.028747] [VIB]vibrator_timer_func
<6>[ 1249.029876] [VIB]vibrator_enable, system_server(parent:zygote): vibrates 0 msec
<6>[ 1249.671264] [VIB]vibrator_enable, Binder_A(parent:zygote): vibrates 0 msec
<6>[ 1249.674591] [VIB]vibrator_enable, Binder_A(parent:zygote): vibrates 40 msec
<6>[ 1249.675781] [ATS][set_vibration][successful]
<6>[ 1249.714996] [VIB]vibrator_timer_func
<6>[ 1249.717224] [VIB]vibrator_enable, system_server(parent:zygote): vibrates 0 msec
<6>[ 1249.977203] [VIB]vibrator_enable, Binder_7(parent:zygote): vibrates 0 msec
<6>[ 1249.977935] [VIB]vibrator_enable, Binder_7(parent:zygote): vibrates 40 msec
<6>[ 1249.978851] [ATS][set_vibration][successful]
<6>[ 1250.018188] [VIB]vibrator_timer_func
<6>[ 1250.019104] [VIB]vibrator_enable, system_server(parent:zygote): vibrates 0 msec
<6>[ 1250.454071] [LS][CM3602] ALS value: 0x3, level: 1 #
<6>[ 1250.464630] [VIB]vibrator_enable, Binder_8(parent:zygote): vibrates 0 msec
<6>[ 1250.465148] [VIB]vibrator_enable, Binder_8(parent:zygote): vibrates 40 msec
<6>[ 1250.466064] [ATS][set_vibration][successful]
<6>[ 1250.505432] [VIB]vibrator_timer_func
<6>[ 1250.506591] [VIB]vibrator_enable, system_server(parent:zygote): vibrates 0 msec
<6>[ 1250.888153] [VIB]vibrator_enable, Binder_5(parent:zygote): vibrates 0 msec
<6>[ 1250.888641] [VIB]vibrator_enable, Binder_5(parent:zygote): vibrates 40 msec
<6>[ 1250.889678] [ATS][set_vibration][successful]
<6>[ 1250.928833] [VIB]vibrator_timer_func
<6>[ 1250.929992] [VIB]vibrator_enable, system_server(parent:zygote): vibrates 0 msec
<6>[ 1251.139526] [VIB]vibrator_enable, Binder_B(parent:zygote): vibrates 0 msec
<6>[ 1251.139953] [VIB]vibrator_enable, Binder_B(parent:zygote): vibrates 40 msec
<6>[ 1251.141632] [ATS][set_vibration][successful]
<6>[ 1251.180236] [VIB]vibrator_timer_func
<6>[ 1251.181274] [VIB]vibrator_enable, system_server(parent:zygote): vibrates 0 msec
<6>[ 1251.979980] [VIB]vibrator_enable, Binder_7(parent:zygote): vibrates 0 msec
<6>[ 1251.980499] [VIB]vibrator_enable, Binder_7(parent:zygote): vibrates 40 msec
<6>[ 1251.981933] [ATS][set_vibration][successful]
<6>[ 1252.020690] [VIB]vibrator_timer_func
<6>[ 1252.021820] [VIB]vibrator_enable, system_server(parent:zygote): vibrates 0 msec
<6>[ 1252.396179] [VIB]vibrator_enable, Binder_A(parent:zygote): vibrates 0 msec
<6>[ 1252.396545] [VIB]vibrator_enable, Binder_A(parent:zygote): vibrates 40 msec
<6>[ 1252.397796] [ATS][set_vibration][successful]
<6>[ 1252.436828] [VIB]vibrator_timer_func
<6>[ 1252.437896] [VIB]vibrator_enable, system_server(parent:zygote): vibrates 0 msec
<6>[ 1252.694671] [VIB]vibrator_enable, Binder_7(parent:zygote): vibrates 0 msec
<6>[ 1252.695190] [VIB]vibrator_enable, Binder_7(parent:zygote): vibrates 40 msec
<6>[ 1252.695953] [ATS][set_vibration][successful]
<6>[ 1252.735412] [VIB]vibrator_timer_func
<6>[ 1252.736389] [VIB]vibrator_enable, system_server(parent:zygote): vibrates 0 msec
<7>[ 1252.781250] set brightness = 158
<7>[ 1252.791900] set brightness = 157
<7>[ 1252.823913] set brightness = 156
<7>[ 1252.856506] set brightness = 155
<7>[ 1252.883331] set brightness = 154
<7>[ 1252.893127] set brightness = 153
<7>[ 1252.927551] set brightness = 152
<7>[ 1252.942626] set brightness = 151
<7>[ 1252.981323] set brightness = 150
<7>[ 1252.992156] set brightness = 149
<7>[ 1253.024841] set brightness = 148
<7>[ 1253.057189] set brightness = 147
<7>[ 1253.073455] set brightness = 146
<7>[ 1253.106079] set brightness = 145
<7>[ 1253.122283] set brightness = 144
<7>[ 1253.154815] set brightness = 143
<7>[ 1253.171722] set brightness = 142
<7>[ 1253.204254] set brightness = 141
<7>[ 1253.220489] set brightness = 140
<7>[ 1253.253021] set brightness = 139
<7>[ 1253.269256] set brightness = 138
<7>[ 1253.302062] set brightness = 137
<7>[ 1253.318542] set brightness = 136
<7>[ 1253.354003] set brightness = 135
<7>[ 1253.389923] set brightness = 134
<7>[ 1253.418304] set brightness = 133
<7>[ 1253.434539] set brightness = 132
<7>[ 1253.450592] set brightness = 131
<7>[ 1253.484100] set brightness = 130
<7>[ 1253.500274] set brightness = 129
<7>[ 1253.533538] set brightness = 128
<7>[ 1253.552734] set brightness = 127
<7>[ 1253.583221] set brightness = 126
<7>[ 1253.599914] set brightness = 125
<7>[ 1253.633239] set brightness = 124
<7>[ 1253.649688] set brightness = 123
<7>[ 1253.683319] set brightness = 122
<7>[ 1253.699890] set brightness = 121
<7>[ 1253.732666] set brightness = 120
<7>[ 1253.749237] set brightness = 119
<7>[ 1253.785644] set brightness = 118
<7>[ 1253.799896] set brightness = 117
<7>[ 1253.833099] set brightness = 116
<6>[ 1254.517730] [VIB]vibrator_enable, Binder_7(parent:zygote): vibrates 0 msec
<6>[ 1254.518188] [VIB]vibrator_enable, Binder_7(parent:zygote): vibrates 40 msec
<6>[ 1254.525543] [ATS][set_vibration][successful]
<6>[ 1254.558380] [VIB]vibrator_timer_func
<6>[ 1254.559143] [VIB]vibrator_enable, system_server(parent:zygote): vibrates 0 msec
<6>[ 1254.765655] [VIB]vibrator_enable, Binder_A(parent:zygote): vibrates 0 msec
<6>[ 1254.766113] [VIB]vibrator_enable, Binder_A(parent:zygote): vibrates 40 msec
<6>[ 1254.768371] [ATS][set_vibration][successful]
<6>[ 1254.806365] [VIB]vibrator_timer_func
<6>[ 1254.807159] [VIB]vibrator_enable, system_server(parent:zygote): vibrates 0 msec
<6>[ 1255.738433] [VIB]vibrator_enable, Binder_1(parent:zygote): vibrates 0 msec
<6>[ 1255.743591] [VIB]vibrator_enable, Binder_1(parent:zygote): vibrates 40 msec
<6>[ 1255.746582] [ATS][set_vibration][successful]
<6>[ 1255.784332] [VIB]vibrator_timer_func
<6>[ 1255.784942] [VIB]vibrator_enable, system_server(parent:zygote): vibrates 0 msec
<6>[ 1256.131042] [VIB]vibrator_enable, Binder_2(parent:zygote): vibrates 0 msec
<6>[ 1256.131439] [VIB]vibrator_enable, Binder_2(parent:zygote): vibrates 40 msec
<6>[ 1256.133087] [ATS][set_vibration][successful]
<6>[ 1256.157257] [LS][CM3602] ALS value: 0x1, level: 0 #
<6>[ 1256.171722] [VIB]vibrator_timer_func
<6>[ 1256.172576] [VIB]vibrator_enable, system_server(parent:zygote): vibrates 0 msec
<7>[ 1256.186584] set brightness = 115
<7>[ 1256.203979] set brightness = 114
<7>[ 1256.229553] set brightness = 113
<7>[ 1256.262725] set brightness = 112
<7>[ 1256.277862] set brightness = 111
<7>[ 1256.310119] set brightness = 110
<7>[ 1256.333251] set brightness = 109
<7>[ 1256.363342] set brightness = 108
<7>[ 1256.377044] set brightness = 107
<7>[ 1256.407226] set brightness = 106
<7>[ 1256.423400] set brightness = 105
<6>[ 1256.445037] [VIB]vibrator_enable, Binder_B(parent:zygote): vibrates 0 msec
<6>[ 1256.445587] [VIB]vibrator_enable, Binder_B(parent:zygote): vibrates 40 msec
<6>[ 1256.447113] [ATS][set_vibration][successful]
<7>[ 1256.461547] set brightness = 104
<7>[ 1256.476654] set brightness = 103
<6>[ 1256.485839] [VIB]vibrator_timer_func
<6>[ 1256.487609] [VIB]vibrator_enable, system_server(parent:zygote): vibrates 0 msec
<7>[ 1256.507141] set brightness = 102
<7>[ 1256.538787] set brightness = 101
<7>[ 1256.555023] set brightness = 100
<7>[ 1256.602355] set brightness = 99
<7>[ 1256.611877] set brightness = 98
<7>[ 1256.637512] set brightness = 97
<7>[ 1256.658264] set brightness = 96
<7>[ 1256.686126] set brightness = 95
<7>[ 1256.701080] set brightness = 94
<7>[ 1256.733551] set brightness = 93
<7>[ 1256.749847] set brightness = 92
<7>[ 1256.782531] set brightness = 91
<7>[ 1256.798950] set brightness = 90
<7>[ 1256.831604] set brightness = 89
<7>[ 1256.848114] set brightness = 88
<7>[ 1256.881195] set brightness = 87
<7>[ 1256.914001] set brightness = 86
<7>[ 1256.934020] set brightness = 85
<7>[ 1256.968994] set brightness = 84
<7>[ 1256.982177] set brightness = 83
<6>[ 1257.110595] [LS][CM3602] ALS value: 0x1, level: 0 #
<7>[ 1257.188079] [K] __msm_rpc_read: prog = 0x30100000, procedure = 3, type = 0, xid = 21
<6>[ 1257.188201] [BATT] M2A_RPC: level_update: 45 at 1252321404467 (2014-01-31 05:10:15.616909781 UTC)
<6>[ 1257.188476] [BATT] power_supply_changed: battery at 1252321678706 (2014-01-31 05:10:15.617184021 UTC)
<6>[ 1257.191864] [BATT] ID=1, level=45, vol=3746, temp=238, batt_current=-224, chg_src=0, chg_en=0, full_bat=1400000, over_vchg=0, smem_vbus=0 at 1252325060993 (2014-01-31 05:10:15.620535837 UTC)
<6>[ 1257.199737] [BATT] ID=1, level=45, vol=3746, temp=238, batt_current=-224, chg_src=0, chg_en=0, full_bat=1400000, over_vchg=0, smem_vbus=0 at 1252332983469 (2014-01-31 05:10:15.628397370 UTC)
<6>[ 1257.200469] healthd: battery l=45 v=3 t=23.8 h=2 st=4 chg=
<4>[ 1258.039276] wl_bss_connect_done succeeded with 20:4e:7f:9a:25:ae
<6>[ 1258.059692] [LS][CM3602] ALS value: 0x5, level: 2 #
<4>[ 1258.095672] wl_bss_connect_done succeeded with 20:4e:7f:9a:25:ae
<6>[ 1259.010528] [LS][CM3602] ALS value: 0x7, level: 3 #
<7>[ 1262.097351] set brightness = 84
<7>[ 1262.140869] set brightness = 85
<7>[ 1262.157287] set brightness = 86
<7>[ 1262.160278] set brightness = 87
<7>[ 1262.193145] set brightness = 88
<7>[ 1262.210723] set brightness = 89
<7>[ 1262.243499] set brightness = 90
<7>[ 1262.261840] set brightness = 91
<7>[ 1262.294494] set brightness = 92
<7>[ 1262.310974] set brightness = 93
<7>[ 1262.344818] set brightness = 94
<7>[ 1262.360412] set brightness = 95
<7>[ 1262.393920] set brightness = 96
<7>[ 1262.410064] set brightness = 97
<7>[ 1262.443054] set brightness = 98
<7>[ 1262.459472] set brightness = 99
<7>[ 1262.492248] set brightness = 100
<7>[ 1262.509124] set brightness = 101
<7>[ 1262.541564] set brightness = 102
<7>[ 1262.558288] set brightness = 103
<7>[ 1262.591125] set brightness = 104
<7>[ 1262.623870] set brightness = 105
<7>[ 1262.640350] set brightness = 106
<7>[ 1262.673522] set brightness = 107
<7>[ 1262.690948] set brightness = 108
<7>[ 1262.722808] set brightness = 109
<7>[ 1262.740814] set brightness = 110
<7>[ 1262.772216] set brightness = 111
<7>[ 1262.788757] set brightness = 112
<7>[ 1262.821807] set brightness = 113
<7>[ 1262.838256] set brightness = 114
<7>[ 1262.871063] set brightness = 115
<7>[ 1262.887878] set brightness = 116
<7>[ 1262.920684] set brightness = 117
<7>[ 1262.937164] set brightness = 118
<7>[ 1262.971466] set brightness = 119
<7>[ 1262.987060] set brightness = 120
<7>[ 1263.017364] set brightness = 121
<7>[ 1263.033325] set brightness = 122
<7>[ 1263.068817] set brightness = 123
<7>[ 1263.085235] set brightness = 124
<7>[ 1263.134643] set brightness = 126
<7>[ 1263.167694] set brightness = 127
<7>[ 1263.185607] set brightness = 128
<7>[ 1263.217376] set brightness = 129
<7>[ 1263.249938] set brightness = 130
<7>[ 1263.266571] set brightness = 131
<7>[ 1263.299621] set brightness = 132
<7>[ 1263.315917] set brightness = 133
<7>[ 1263.348846] set brightness = 134
<7>[ 1263.365386] set brightness = 135
<7>[ 1263.398315] set brightness = 136
<7>[ 1263.414733] set brightness = 137
<7>[ 1263.447998] set brightness = 138
<7>[ 1263.464172] set brightness = 139
<7>[ 1263.507324] set brightness = 140
<7>[ 1263.514312] set brightness = 141
<7>[ 1263.547058] set brightness = 142
<7>[ 1263.563140] set brightness = 143
<7>[ 1263.598205] set brightness = 144
<7>[ 1263.612487] set brightness = 145
<7>[ 1263.645263] set brightness = 146
<7>[ 1263.663330] set brightness = 147
<7>[ 1263.694702] set brightness = 148
<7>[ 1263.711303] set brightness = 149
<7>[ 1263.744201] set brightness = 150
<7>[ 1263.760925] set brightness = 151
<7>[ 1263.793548] set brightness = 152
<7>[ 1263.810363] set brightness = 153
<7>[ 1263.843200] set brightness = 154
<7>[ 1263.875091] set brightness = 155
<3>[ 1266.210968] CFG80211-ERROR) wl_notify_connect_status : Received WLC_E_DEAUTH_IND event with reason code: 15
<3>[ 1266.215301] CFG80211-ERROR) wl_notify_connect_status : link down, calling cfg80211_disconnected with deauth_reason:15
<6>[ 1266.234863] cfg80211: Calling CRDA to update world regulatory domain
<6>[ 1266.944976] microp_led_pwm_brightness_set, data[1] = 0
<7>[ 1268.966613] set brightness = 152
<7>[ 1268.982879] set brightness = 149
<7>[ 1269.000152] set brightness = 146
<7>[ 1269.015991] set brightness = 142
<7>[ 1269.032287] set brightness = 139
<7>[ 1269.049011] set brightness = 136
<7>[ 1269.067108] set brightness = 132
<7>[ 1269.082946] set brightness = 129
<7>[ 1269.098358] set brightness = 126
<7>[ 1269.114715] set brightness = 123
<7>[ 1269.131195] set brightness = 119
<7>[ 1269.148345] set brightness = 116
<7>[ 1269.164184] set brightness = 113
<7>[ 1269.187072] set brightness = 109
<7>[ 1269.201873] set brightness = 106
<7>[ 1269.213653] set brightness = 103
<7>[ 1269.232360] set brightness = 100
<7>[ 1269.247009] set brightness = 96
<7>[ 1269.262908] set brightness = 93
<7>[ 1269.279418] set brightness = 90
<7>[ 1269.296447] set brightness = 86
<7>[ 1269.312683] set brightness = 83
<7>[ 1269.328796] set brightness = 80
<7>[ 1269.345520] set brightness = 77
<7>[ 1269.363311] set brightness = 73
<7>[ 1269.379852] set brightness = 70
<7>[ 1269.394836] set brightness = 67
<7>[ 1269.411651] set brightness = 63
<7>[ 1269.438537] set brightness = 60
<7>[ 1269.444274] set brightness = 57
<7>[ 1269.461456] set brightness = 54
<7>[ 1269.477661] set brightness = 50
<7>[ 1269.493835] set brightness = 47
<7>[ 1269.507843] set brightness = 44
<7>[ 1269.524536] set brightness = 40
<7>[ 1269.541412] set brightness = 37
<7>[ 1269.557464] set brightness = 34
<7>[ 1269.573760] set brightness = 30
<7>[ 1269.590209] set brightness = 27
<7>[ 1269.612670] set brightness = 24
<7>[ 1269.627380] set brightness = 21
<7>[ 1269.642028] set brightness = 17
<7>[ 1269.659881] set brightness = 14
<7>[ 1269.674926] set brightness = 11
<7>[ 1269.690582] set brightness = 10
<6>[ 1271.472503] microp_led_pwm_brightness_set, data[1] = 255
<7>[ 1271.503570] set brightness = 13
<7>[ 1271.518981] set brightness = 16
<7>[ 1271.535675] set brightness = 20
<7>[ 1271.551879] set brightness = 23
<7>[ 1271.568389] set brightness = 26
<7>[ 1271.584625] set brightness = 29
<7>[ 1271.606933] set brightness = 33
<7>[ 1271.627777] set brightness = 36
<7>[ 1271.649871] set brightness = 43
<7>[ 1271.676727] set brightness = 46
<7>[ 1271.699066] set brightness = 50
<7>[ 1271.726623] set brightness = 54
<7>[ 1271.731262] set brightness = 57
<7>[ 1271.748626] set brightness = 61
<7>[ 1271.765441] set brightness = 64
<7>[ 1271.779418] set brightness = 67
<7>[ 1271.794311] set brightness = 70
<7>[ 1271.814422] set brightness = 74
<7>[ 1271.828125] set brightness = 77
<7>[ 1271.846313] set brightness = 80
<7>[ 1271.861846] set brightness = 83
<7>[ 1271.892944] set brightness = 87
<7>[ 1271.902832] set brightness = 90
<7>[ 1271.906860] set brightness = 93
<7>[ 1271.929046] set brightness = 96
<7>[ 1271.944122] set brightness = 100
<7>[ 1271.963226] set brightness = 103
<7>[ 1271.973358] set brightness = 106
<7>[ 1271.985107] set brightness = 109
<7>[ 1272.000610] set brightness = 113
<7>[ 1272.025024] set brightness = 116
<7>[ 1272.043579] set brightness = 119
<7>[ 1272.060485] set brightness = 122
<7>[ 1272.070373] set brightness = 126
<7>[ 1272.088958] set brightness = 129
<7>[ 1272.108520] set brightness = 132
<7>[ 1272.132049] set brightness = 135
<7>[ 1272.138702] set brightness = 139
<7>[ 1272.149597] set brightness = 142
<7>[ 1272.174407] set brightness = 145
<7>[ 1272.185791] set brightness = 148
<7>[ 1272.209930] set brightness = 152
<7>[ 1272.222900] set brightness = 155
<6>[ 1275.186279] [LS][CM3602] ALS value: 0x4, level: 2 #
<6>[ 1276.136627] [LS][CM3602] ALS value: 0x8, level: 3 #
<4>[ 1279.925720] wl_bss_connect_done succeeded with 20:4e:7f:9a:25:ae
<4>[ 1280.009674] wl_bss_connect_done succeeded with 20:4e:7f:9a:25:ae
<6>[ 1282.801269] [LS][CM3602] ALS value: 0x2, level: 1 #
<6>[ 1283.751312] [LS][CM3602] ALS value: 0x4, level: 2 #
<3>[ 1284.628326] CFG80211-ERROR) wl_cfg80211_disconnect : Reason 3
<6>[ 1284.634338] cfg80211: Calling CRDA to update world regulatory domain
<6>[ 1284.707763] [LS][CM3602] ALS value: 0x8, level: 3 #
<6>[ 1286.609436] [LS][CM3602] ALS value: 0x3, level: 1 #
<7>[ 1287.190460] [K] __msm_rpc_read: prog = 0x30100000, procedure = 3, type = 0, xid = 22
<6>[ 1287.190917] [BATT] M2A_RPC: level_update: 44 at 1282278811278 (2014-01-31 05:10:45.573859527 UTC)
<6>[ 1287.193511] [BATT] power_supply_changed: battery at 1282281431790 (2014-01-31 05:10:45.576449567 UTC)
<6>[ 1287.196044] [BATT] ID=1, level=44, vol=3750, temp=240, batt_current=-212, chg_src=0, chg_en=0, full_bat=1400000, over_vchg=0, smem_vbus=0 at 1282284021829 (2014-01-31 05:10:45.578978665 UTC)
<6>[ 1287.197418] [BATT] ID=1, level=44, vol=3750, temp=240, batt_current=-212, chg_src=0, chg_en=0, full_bat=1400000, over_vchg=0, smem_vbus=0 at 1282285636795 (2014-01-31 05:10:45.580349862 UTC)
<6>[ 1287.201812] healthd: battery l=44 v=3 t=24.0 h=2 st=4 chg=
<6>[ 1289.465667] [LS][CM3602] ALS value: 0x5, level: 2 #
<6>[ 1290.417022] [LS][CM3602] ALS value: 0x4, level: 2 #
<6>[ 1291.366912] [LS][CM3602] ALS value: 0x7, level: 3 #
<6>[ 1291.621093] [VIB]vibrator_enable, Binder_C(parent:zygote): vibrates 0 msec
<6>[ 1291.622650] [VIB]vibrator_enable, Binder_C(parent:zygote): vibrates 40 msec
<6>[ 1291.625183] [ATS][set_vibration][successful]
<6>[ 1291.663391] [VIB]vibrator_timer_func
<6>[ 1291.664764] [VIB]vibrator_enable, system_server(parent:zygote): vibrates 0 msec
<6>[ 1292.320465] [LS][CM3602] ALS value: 0x4, level: 2 #
<6>[ 1292.331573] [VIB]vibrator_enable, Binder_3(parent:zygote): vibrates 0 msec
<6>[ 1292.331970] [VIB]vibrator_enable, Binder_3(parent:zygote): vibrates 40 msec
<6>[ 1292.333923] [ATS][set_vibration][successful]
<6>[ 1292.372253] [VIB]vibrator_timer_func
<6>[ 1292.373382] [VIB]vibrator_enable, system_server(parent:zygote): vibrates 0 msec
<6>[ 1292.536010] [VIB]vibrator_enable, Binder_C(parent:zygote): vibrates 0 msec
<6>[ 1292.536499] [VIB]vibrator_enable, Binder_C(parent:zygote): vibrates 40 msec
<6>[ 1292.541290] [ATS][set_vibration][successful]
<6>[ 1292.576751] [VIB]vibrator_timer_func
<6>[ 1292.577575] [VIB]vibrator_enable, system_server(parent:zygote): vibrates 0 msec
<6>[ 1292.896118] [VIB]vibrator_enable, Binder_3(parent:zygote): vibrates 0 msec
<6>[ 1292.896514] [VIB]vibrator_enable, Binder_3(parent:zygote): vibrates 40 msec
<6>[ 1292.898376] [ATS][set_vibration][successful]
<6>[ 1292.936828] [VIB]vibrator_timer_func
<6>[ 1292.937469] [VIB]vibrator_enable, system_server(parent:zygote): vibrates 0 msec
<6>[ 1293.493041] [VIB]vibrator_enable, Binder_A(parent:zygote): vibrates 0 msec
<6>[ 1293.493499] [VIB]vibrator_enable, Binder_A(parent:zygote): vibrates 40 msec
<6>[ 1293.495056] [ATS][set_vibration][successful]
<6>[ 1293.533782] [VIB]vibrator_timer_func
<6>[ 1293.534881] [VIB]vibrator_enable, system_server(parent:zygote): vibrates 0 msec
<6>[ 1293.759246] [VIB]vibrator_enable, Binder_1(parent:zygote): vibrates 0 msec
<6>[ 1293.760131] [VIB]vibrator_enable, Binder_1(parent:zygote): vibrates 40 msec
<6>[ 1293.761535] [ATS][set_vibration][successful]
<6>[ 1293.800292] [VIB]vibrator_timer_func
<6>[ 1293.801330] [VIB]vibrator_enable, system_server(parent:zygote): vibrates 0 msec
<6>[ 1294.059295] [VIB]vibrator_enable, Binder_C(parent:zygote): vibrates 0 msec
<6>[ 1294.059722] [VIB]vibrator_enable, Binder_C(parent:zygote): vibrates 40 msec
<6>[ 1294.061370] [ATS][set_vibration][successful]
<6>[ 1294.099975] [VIB]vibrator_timer_func
<6>[ 1294.100830] [VIB]vibrator_enable, system_server(parent:zygote): vibrates 0 msec
<6>[ 1294.513397] [VIB]vibrator_enable, Binder_7(parent:zygote): vibrates 0 msec
<6>[ 1294.513977] [VIB]vibrator_enable, Binder_7(parent:zygote): vibrates 40 msec
<6>[ 1294.515136] [ATS][set_vibration][successful]
<6>[ 1294.554382] [VIB]vibrator_timer_func
<6>[ 1294.554931] [VIB]vibrator_enable, system_server(parent:zygote): vibrates 0 msec
<6>[ 1294.810974] [VIB]vibrator_enable, Binder_8(parent:zygote): vibrates 0 msec
<6>[ 1294.811401] [VIB]vibrator_enable, Binder_8(parent:zygote): vibrates 40 msec
<6>[ 1294.813049] [ATS][set_vibration][successful]
<6>[ 1294.851684] [VIB]vibrator_timer_func
<6>[ 1294.852935] [VIB]vibrator_enable, system_server(parent:zygote): vibrates 0 msec
<6>[ 1295.554016] [VIB]vibrator_enable, Binder_B(parent:zygote): vibrates 0 msec
<6>[ 1295.554534] [VIB]vibrator_enable, Binder_B(parent:zygote): vibrates 40 msec
<6>[ 1295.555877] [ATS][set_vibration][successful]
<6>[ 1295.594696] [VIB]vibrator_timer_func
<6>[ 1295.595611] [VIB]vibrator_enable, system_server(parent:zygote): vibrates 0 msec
<6>[ 1296.114715] [VIB]vibrator_enable, Binder_8(parent:zygote): vibrates 0 msec
<6>[ 1296.115142] [VIB]vibrator_enable, Binder_8(parent:zygote): vibrates 40 msec
<6>[ 1296.115966] [ATS][set_vibration][successful]
<6>[ 1296.155426] [VIB]vibrator_timer_func
<6>[ 1296.156402] [VIB]vibrator_enable, system_server(parent:zygote): vibrates 0 msec
<6>[ 1296.553405] [VIB]vibrator_enable, Binder_9(parent:zygote): vibrates 0 msec
<6>[ 1296.553924] [VIB]vibrator_enable, Binder_9(parent:zygote): vibrates 40 msec
<6>[ 1296.554992] [ATS][set_vibration][successful]
<6>[ 1296.594207] [VIB]vibrator_timer_func
<6>[ 1296.595336] [VIB]vibrator_enable, system_server(parent:zygote): vibrates 0 msec
<6>[ 1296.977355] [VIB]vibrator_enable, Binder_6(parent:zygote): vibrates 0 msec
<6>[ 1296.978149] [VIB]vibrator_enable, Binder_6(parent:zygote): vibrates 40 msec
<6>[ 1296.978881] [ATS][set_vibration][successful]
<6>[ 1297.018310] [VIB]vibrator_timer_func
<6>[ 1297.019256] [VIB]vibrator_enable, system_server(parent:zygote): vibrates 0 msec
<6>[ 1297.078460] [LS][CM3602] ALS value: 0x1, level: 0 #
<6>[ 1298.028228] [LS][CM3602] ALS value: 0x5, level: 2 #
<4>[ 1298.559234] wl_bss_connect_done succeeded with 20:4e:7f:9a:25:ae
<4>[ 1298.645660] wl_bss_connect_done succeeded with 20:4e:7f:9a:25:ae
<6>[ 1298.981842] [LS][CM3602] ALS value: 0x7, level: 3 #
<3>[ 1306.740875] CFG80211-ERROR) wl_notify_connect_status : Received WLC_E_DEAUTH_IND event with reason code: 15
<3>[ 1306.746459] CFG80211-ERROR) wl_notify_connect_status : link down, calling cfg80211_disconnected with deauth_reason:15
<6>[ 1306.756195] cfg80211: Calling CRDA to update world regulatory domain
<6>[ 1307.555786] microp_led_pwm_brightness_set, data[1] = 0
<7>[ 1309.567840] set brightness = 154
<7>[ 1309.583923] set brightness = 151
<7>[ 1309.600280] set brightness = 148
<7>[ 1309.618072] set brightness = 144
<7>[ 1309.632751] set brightness = 141
<7>[ 1309.649047] set brightness = 138
<7>[ 1309.666564] set brightness = 135
<7>[ 1309.690948] set brightness = 131
<7>[ 1309.697937] set brightness = 128
<7>[ 1309.714050] set brightness = 125
<7>[ 1309.732696] set brightness = 122
<7>[ 1309.751007] set brightness = 118
<7>[ 1309.764068] set brightness = 115
<7>[ 1309.780303] set brightness = 112
<7>[ 1309.795288] set brightness = 109
<7>[ 1309.812652] set brightness = 105
<7>[ 1309.827789] set brightness = 102
<7>[ 1309.843811] set brightness = 99
<7>[ 1309.862182] set brightness = 96
<7>[ 1309.876281] set brightness = 92
<7>[ 1309.892730] set brightness = 89
<7>[ 1309.911682] set brightness = 86
<7>[ 1309.925079] set brightness = 83
<7>[ 1309.942047] set brightness = 79
<7>[ 1309.957427] set brightness = 76
<7>[ 1309.973632] set brightness = 73
<7>[ 1309.990356] set brightness = 70
<7>[ 1310.046997] set brightness = 60
<7>[ 1310.074218] set brightness = 54
<7>[ 1310.115295] set brightness = 47
<7>[ 1310.128051] set brightness = 44
<7>[ 1310.133636] set brightness = 41
<7>[ 1310.149963] set brightness = 37
<7>[ 1310.166259] set brightness = 34
<7>[ 1310.182495] set brightness = 31
<7>[ 1310.198791] set brightness = 28
<7>[ 1310.214935] set brightness = 24
<7>[ 1310.231262] set brightness = 21
<7>[ 1310.247711] set brightness = 18
<7>[ 1310.263702] set brightness = 15
<7>[ 1310.280670] set brightness = 11
<7>[ 1310.296051] set brightness = 10
<6>[ 1311.432800] microp_led_pwm_brightness_set, data[1] = 255
<7>[ 1311.455444] set brightness = 11
<7>[ 1311.473266] set brightness = 14
<7>[ 1311.489501] set brightness = 18
<7>[ 1311.499450] set brightness = 21
<7>[ 1311.515716] set brightness = 24
<7>[ 1311.532440] set brightness = 27
<7>[ 1311.548156] set brightness = 31
<7>[ 1311.565093] set brightness = 34
<7>[ 1311.581787] set brightness = 37
<7>[ 1311.603363] set brightness = 40
<7>[ 1311.622100] set brightness = 44
<7>[ 1311.638244] set brightness = 47
<7>[ 1311.654357] set brightness = 50
<7>[ 1311.672576] set brightness = 53
<7>[ 1311.693389] set brightness = 58
<7>[ 1311.721954] set brightness = 61
<7>[ 1311.725799] set brightness = 64
<7>[ 1311.747039] set brightness = 68
<7>[ 1311.760223] set brightness = 71
<7>[ 1311.779571] set brightness = 75
<7>[ 1311.794616] set brightness = 78
<7>[ 1311.812316] set brightness = 81
<7>[ 1311.827606] set brightness = 85
<7>[ 1311.841888] set brightness = 88
<7>[ 1311.853454] set brightness = 91
<7>[ 1311.874847] set brightness = 94
<7>[ 1311.890533] set brightness = 98
<7>[ 1311.903076] set brightness = 101
<7>[ 1311.918243] set brightness = 104
<7>[ 1311.938720] set brightness = 107
<7>[ 1311.953979] set brightness = 111
<7>[ 1311.967346] set brightness = 114
<7>[ 1311.986053] set brightness = 117
<7>[ 1311.997100] set brightness = 120
<7>[ 1312.013153] set brightness = 124
<7>[ 1312.029815] set brightness = 127
<7>[ 1312.046966] set brightness = 130
<7>[ 1312.063232] set brightness = 133
<7>[ 1312.078308] set brightness = 137
<7>[ 1312.095489] set brightness = 140
<7>[ 1312.111816] set brightness = 143
<7>[ 1312.128875] set brightness = 146
<7>[ 1312.151672] set brightness = 150
<7>[ 1312.168029] set brightness = 153
<7>[ 1312.196685] set brightness = 155
<6>[ 1317.034149] microp_led_pwm_brightness_set, data[1] = 0
<7>[ 1317.195190] [K] __msm_rpc_read: prog = 0x30100000, procedure = 3, type = 0, xid = 23
<6>[ 1317.195648] [BATT] M2A_RPC: level_update: 43 at 1312237833037 (2014-01-31 05:11:15.532850815 UTC)
<6>[ 1317.199981] [BATT] power_supply_changed: battery at 1312242190399 (2014-01-31 05:11:15.537177706 UTC)
<6>[ 1317.202484] [BATT] ID=1, level=43, vol=3764, temp=240, batt_current=-168, chg_src=0, chg_en=0, full_bat=1400000, over_vchg=0, smem_vbus=0 at 1312244689026 (2014-01-31 05:11:15.539645861 UTC)
<6>[ 1317.203796] [BATT] ID=1, level=43, vol=3764, temp=240, batt_current=-168, chg_src=0, chg_en=0, full_bat=1400000, over_vchg=0, smem_vbus=0 at 1312246273521 (2014-01-31 05:11:15.540956117 UTC)
<6>[ 1317.206512] healthd: battery l=43 v=3 t=24.0 h=2 st=4 chg=
<6>[ 1322.778717] [LS][CM3602] ALS value: 0x4, level: 2 #
<6>[ 1323.570617] microp_led_pwm_brightness_set, data[1] = 255
<6>[ 1325.634918] [LS][CM3602] ALS value: 0x9, level: 3 #
<6>[ 1329.442565] [LS][CM3602] ALS value: 0x2, level: 1 #
<6>[ 1332.299987] [LS][CM3602] ALS value: 0x9, level: 3 #
<6>[ 1332.481018] microp_led_pwm_brightness_set, data[1] = 0
<7>[ 1339.502288] set brightness = 153
<7>[ 1339.519592] set brightness = 150
<7>[ 1339.535766] set brightness = 146
<7>[ 1339.553039] set brightness = 143
<7>[ 1339.569702] set brightness = 140
<7>[ 1339.586303] set brightness = 137
<7>[ 1339.602325] set brightness = 133
<7>[ 1339.618438] set brightness = 130
<7>[ 1339.634765] set brightness = 127
<7>[ 1339.650848] set brightness = 124
<7>[ 1339.667755] set brightness = 120
<7>[ 1339.683563] set brightness = 117
<7>[ 1339.699523] set brightness = 114
<7>[ 1339.725921] set brightness = 111
<7>[ 1339.736114] set brightness = 107
<7>[ 1339.753417] set brightness = 104
<7>[ 1339.771392] set brightness = 101
<7>[ 1339.784362] set brightness = 98
<7>[ 1339.799194] set brightness = 95
<7>[ 1339.814178] set brightness = 91
<7>[ 1339.831268] set brightness = 88
<7>[ 1339.846221] set brightness = 85
<7>[ 1339.860961] set brightness = 82
<7>[ 1339.877288] set brightness = 78
<7>[ 1339.894927] set brightness = 75
<7>[ 1339.909667] set brightness = 72
<7>[ 1339.926086] set brightness = 69
<7>[ 1339.942108] set brightness = 65
<7>[ 1339.958435] set brightness = 62
<7>[ 1339.974975] set brightness = 59
<7>[ 1340.021759] set brightness = 49
<7>[ 1340.054229] set brightness = 43
<7>[ 1340.073699] set brightness = 39
<7>[ 1340.086608] set brightness = 36
<7>[ 1340.102844] set brightness = 33
<7>[ 1340.119079] set brightness = 30
<7>[ 1340.135345] set brightness = 26
<7>[ 1340.151428] set brightness = 23
<7>[ 1340.167816] set brightness = 20
<7>[ 1340.187805] set brightness = 17
<7>[ 1340.200134] set brightness = 14
<7>[ 1340.219268] set brightness = 10
<6>[ 1341.821533] [LS][CM3602] ALS value: 0x4, level: 2 #
<7>[ 1342.496154] [LS][CM3602] lightsensor_ioctl: set value = 0
<6>[ 1342.496765] [LS][CM3602] lightsensor_disable
<6>[ 1343.052825] [COMP] Compass disable
<6>[ 1343.094848] [GSNR] Gsensor disable
<6>[ 1343.135009] [VIB]vibrator_enable, system_server(parent:zygote): vibrates 0 msec
<4>[ 1343.167755] dhd_set_suspend: force extra Suspend setting
<7>[ 1343.226226] set brightness = 0
<6>[ 1343.240661] request_suspend_state: sleep (0->3) at 1338242503822 (2014-01-31 05:11:41.538191963 UTC)
<6>[ 1343.245544] [GSNR] Gsensor disable
<3>[ 1343.245635] curcial_oj_early_suspend: enter
<6>[ 1343.246124] sleep_stat.0: 4183597ms 13745 4177684ms 13696 - 0 0 0 - 0 0 - 0 0 0 0 0(2014-01-31 05:11:41.543646282 UTC)
<7>[ 1343.246307] glacier_panel_blank(611)
<7>[ 1343.246490] set brightness = 0
<7>[ 1343.246734] __capella_cm3602_power: Turn the capella_cm3602 power off
<6>[ 1343.247039] atmel_ts_suspend:[TP]enter
<6>[ 1343.247955] atmel_ts_suspend:[TP]done
<6>[ 1343.248168] [DISP] msmfb_suspend
<7>[ 1343.248291] glacier_mddi_uninit(599)
<7>[ 1343.248504] mddi_power(659)
<6>[ 1343.253295] [DISP] msmfb: pan_update in state(4)
<6>[ 1343.253326] [DISP] msmfb: drawing while asleep
<7>[ 1343.569152] [COMP][AKM8975] AKECS_GetOpenStatus:
<6>[ 1343.693054] sleep_stat.1: 4183597ms 13745 4177684ms 13696 - 0 0 0 - 0 0 - 0 0 0 0 0(2014-01-31 05:11:41.989833966 UTC)
<4>[ 1343.693695] Freezing user space processes ... (elapsed 0.05 seconds) done.
<4>[ 1343.750610] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
<6>[ 1343.780090] msm_sdcc_setup_vreg: Disabling SD slot power
<6>[ 1343.786285] mmc2: msmsdcc_pm_suspend leave
<6>[ 1343.786773] mmc1: msmsdcc_pm_suspend leave
<6>[ 1343.791107] mmc0: msmsdcc_pm_suspend leave
<6>[ 1343.792633] [SPI] msm_spi_suspend
<6>[ 1343.793121] [USB] OTG PM suspend
<6>[ 1343.794036] PM: suspend of devices complete after 21.360 msecs
<6>[ 1343.796020] PM: late suspend of devices complete after 1.645 msecs
<6>[ 1343.796844] Enabled clocks:
<6>[ 1343.796844] pll3_clk -> lpxo_clk
<6>[ 1343.796844] Enabled clock count: 1
<6>[ 1343.796844] SMEM_APPS_DEM_SLAVE_DATA: 131074s 2000000 200 0 0 0 0 0 0
<6>[ 1343.796844] msm_pm_power_collapse(): change clock rate (old rate = 245760)
<6>[ 1343.796844] [R] suspend end
<6>[ 1343.796844] [R] resume start
<6>[ 1343.796844] msm_pm_power_collapse(): restore clock rate to 245760
<6>[ 1343.796844] SMEM_APPS_DEM_SLAVE_DATA: 131074s 2000000 200 0 8 0 30000048 7 RPCCALL 1b
<6>[ 1343.796844] SMEM_APPS_DEM_SLAVE_DATA: 131074s 2000000 200 0 8 0 30000048 7 RPCCALL 1b
<6>[ 1343.798828] PM: early resume of devices complete after 1.371 msecs
<6>[ 1343.801025] [USB] OTG PM resume
<6>[ 1343.801391] [SPI] msm_spi_resume
<6>[ 1343.802398] mmc0: msmsdcc_pm_resume leave
<6>[ 1343.803039] mmc1: msmsdcc_pm_resume leave
<6>[ 1343.803405] mmc2: msmsdcc_pm_resume leave
<7>[ 1343.803985] [COMP][AKM8975] akm8975_resume: (m, a, t, mv) = (0x0, 0x0, 0x0, 0x0)
<6>[ 1343.812103] wakeup wake lock: rpcrotuer_smd_xprt
<6>[ 1343.820800] PM: resume of devices complete after 20.080 msecs
<4>[ 1343.822692] Restarting tasks ... done.
<6>[ 1343.846801] sleep_stat.2: 4185519ms 13752 4179606ms 13703 - 0 0 0 - 0 0 - 0 0 0 0 0(2014-01-31 05:11:47.032947330 UTC)
<6>[ 1343.847503] negate_client_stat: 0 0 36 - 0 0 0 0 0 - 0 0 964 0 31 - 0 0 1001 15 8 - 0 0 0 0 0 - 0 0 0 0 0
<6>[ 1343.848205] suspend: exit suspend, ret = 0 (2014-01-31 05:11:47.034410516 UTC)
<6>[ 1343.848876] active wake lock alarm, time left 498
<4>[ 1344.038940] mmc0: Starting deferred resume
<7>[ 1344.046051] [COMP][AKM8975] AKECS_GetOpenStatus:
<6>[ 1344.074523] mmc0: Deferred resume completed
<6>[ 1344.302825] sleep_stat.1: 4185519ms 13752 4179606ms 13703 - 0 0 0 - 0 0 - 0 0 0 0 0(2014-01-31 05:11:47.488453482 UTC)
<4>[ 1344.303009] Freezing user space processes ... (elapsed 0.02 seconds) done.
<4>[ 1344.580566] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
<6>[ 1344.637145] mmc2: msmsdcc_pm_suspend leave
<6>[ 1344.638153] mmc1: msmsdcc_pm_suspend leave
<6>[ 1344.641113] mmc0: msmsdcc_pm_suspend leave
<6>[ 1344.642028] [SPI] msm_spi_suspend
<6>[ 1344.643005] [USB] OTG PM suspend
<6>[ 1344.643707] PM: suspend of devices complete after 39.126 msecs
<6>[ 1344.646362] PM: late suspend of devices complete after 1.980 msecs
<6>[ 1344.647003] Enabled clocks:
<6>[ 1344.647003] pll3_clk -> lpxo_clk
<6>[ 1344.647003] Enabled clock count: 1
<6>[ 1344.647003] SMEM_APPS_DEM_SLAVE_DATA: 753678s 2000000 200 0 0 0 0 0 0
<6>[ 1344.647003] msm_pm_power_collapse(): change clock rate (old rate = 245760)
<6>[ 1344.647003] [R] suspend end
<6>[ 1344.647003] [R] resume start
<6>[ 1344.647003] msm_pm_power_collapse(): restore clock rate to 245760
<6>[ 1344.647003] SMEM_APPS_DEM_SLAVE_DATA: 753678s 2000000 200 0 4 0 30000048 7 RPCCALL 1b
<6>[ 1344.647003] SMEM_APPS_DEM_SLAVE_DATA: 753678s 2000000 200 0 4 0 30000048 7 RPCCALL 1b
<4>[ 1344.647003] pm8058_show_resume_irq: 511 triggered
<6>[ 1344.648956] PM: early resume of devices complete after 1.340 msecs
<6>[ 1344.650177] gpio_event_input_irq_handler, irq=511, use_irq=1
<6>[ 1344.650817] wakeup wake lock: gpio_input
<6>[ 1344.652038] [USB] OTG PM resume
<6>[ 1344.652709] [SPI] msm_spi_resume
<6>[ 1344.653686] mmc0: msmsdcc_pm_resume leave
<6>[ 1344.654052] mmc1: msmsdcc_pm_resume leave
<6>[ 1344.654693] mmc2: msmsdcc_pm_resume leave
<7>[ 1344.655273] [COMP][AKM8975] akm8975_resume: (m, a, t, mv) = (0x0, 0x0, 0x0, 0x0)
<6>[ 1344.661712] gpio_keys_scan_keys: key 1-110, 3 (191) changed to 1
<6>[ 1344.662078] gpio_keys_scan_keys: OJ action key 1-272, 3 (191) changed to 1
<6>[ 1344.662902] PM: resume of devices complete after 11.183 msecs
<4>[ 1344.664459] Restarting tasks ... done.
<6>[ 1344.691192] sleep_stat.2: 4185617ms 13753 4179704ms 13704 - 0 0 0 - 0 0 - 0 0 0 0 0(2014-01-31 05:11:48.032092720 UTC)
<6>[ 1344.691589] negate_client_stat: 0 0 0 - 0 0 0 0 0 - 0 0 9 0 0 - 0 0 14 15 4 - 0 0 0 0 0 - 0 0 0 0 0
<6>[ 1344.692291] suspend: exit suspend, ret = 0 (2014-01-31 05:11:48.033250970 UTC)
<6>[ 1344.692962] active wake lock KeyEvents
<6>[ 1344.703491] microp_led_pwm_brightness_set, data[1] = 255
<6>[ 1344.704406] [COMP] Compass enable
<7>[ 1344.705841] [LS][CM3602] lightsensor_ioctl: set value = 1
<6>[ 1344.705932] [LS][CM3602] lightsensor_enable
<7>[ 1344.706024] [LS][CM3602] lightsensor_enable: microp is suspended
<6>[ 1344.739898] request_suspend_state: wakeup (3->0) at 1339739610300 (2014-01-31 05:11:48.080803027 UTC)
<7>[ 1344.740112] mddi_power(659)
<4>[ 1344.754333] dhd_set_suspend: Remove extra suspend setting
<6>[ 1344.765991] gpio_event_input_irq_handler, irq=511, use_irq=1
<6>[ 1344.776611] gpio_keys_scan_keys: key 1-110, 3 (191) changed to 0
<6>[ 1344.776794] gpio_keys_scan_keys: OJ action key 1-272, 3 (191) changed to 0
<6>[ 1344.791320] [DISP] msmfb: pan_update in state(4)
<6>[ 1344.791320] [DISP] msmfb: drawing while asleep
<7>[ 1344.815521] glacier_mddi_init
<7>[ 1344.888031] [COMP][AKM8975] AKECS_GetOpenStatus:
<6>[ 1344.894683] [DISP] msmfb: pan_update in state(4)
<6>[ 1344.894714] [DISP] msmfb: drawing while asleep
<6>[ 1344.899658] [GSNR] Gsensor enable
<6>[ 1344.937805] [DISP] msmfb: ready, waiting for full update
<6>[ 1344.937835] atmel_ts_resume:[TP]enter
<7>[ 1344.950897] [COMP][AKM8975] AKECS_GetCloseStatus:
<6>[ 1344.950927] atmel_ts_resume:[TP]done
<7>[ 1344.951171] __capella_cm3602_power: Turn the capella_cm3602 power on
<6>[ 1344.951385] sleep_stat.3: 4185617ms 13753 4179704ms 13704 - 0 0 0 - 0 0 - 0 0 0 0 0(2014-01-31 05:11:48.292019717 UTC)
<3>[ 1344.951385] curcial_oj_late_resume: enter
<6>[ 1344.962829] [TP]0x01 0x40 0x04 0xE0 0xBA
<6>[ 1344.971984] [TP]0x01 0x50 0x04 0xE0 0xBA
<6>[ 1344.980346] [TP]0x01 0x40 0x04 0xE0 0xBA
<6>[ 1344.988739] [TP]0x01 0x00 0x04 0xE0 0xBA
<6>[ 1344.998260] [DISP] msmfb: pan_update in state(1)
<6>[ 1344.998291] [DISP] msmfb: full update starting
<6>[ 1345.002349] OpticalJoystick Device ID: 83
<6>[ 1345.003234] OJ Driver: Revision : 01
<6>[ 1345.004943] [GSNR] Gsensor enable
<6>[ 1345.009338] [DISP] msmfb: pan_update in state(3)
<6>[ 1345.021759] [DISP] msmfb: full update completed
<6>[ 1345.021789] [DISP] msmfb: turning on panel
<7>[ 1345.021820] glacier_panel_unblank(621)
<7>[ 1345.051940] turn on backlight
<7>[ 1345.051971] set brightness = 100
<7>[ 1345.062408] set brightness = 77
<7>[ 1345.077880] set brightness = 82
<7>[ 1345.092224] set brightness = 85
<7>[ 1345.111206] set brightness = 88
<7>[ 1345.127471] set brightness = 92
<7>[ 1345.135498] set brightness = 95
<7>[ 1345.183654] set brightness = 98
<7>[ 1345.197967] set brightness = 105
<7>[ 1345.201995] set brightness = 108
<7>[ 1345.233917] set brightness = 114
<7>[ 1345.249176] set brightness = 118
<7>[ 1345.266571] set brightness = 121
<7>[ 1345.286041] set brightness = 124
<7>[ 1345.311523] set brightness = 127
<7>[ 1345.321197] set brightness = 130
<6>[ 1345.756225] [LS][CM3602] ALS value: 0xA, level: 3 #
<6>[ 1345.770172] [LS][CM3602] ALS value: 0xA, level: 3 #
<6>[ 1346.003814] [TP]S1@412,798
<6>[ 1346.027069] [VIB]vibrator_enable, Binder_4(parent:zygote): vibrates 0 msec
<6>[ 1346.029449] [VIB]vibrator_enable, Binder_4(parent:zygote): vibrates 20 msec
<6>[ 1346.031402] [ATS][set_vibration][successful]
<6>[ 1346.049926] [VIB]vibrator_timer_func
<6>[ 1346.055450] [VIB]vibrator_enable, system_server(parent:zygote): vibrates 0 msec
<6>[ 1346.205047] [TP]E1@1006,774
<6>[ 1346.206115] [TP]calibration confirm with recal by position
<6>[ 1346.223083] [VIB]vibrator_enable, Binder_7(parent:zygote): vibrates 0 msec
<6>[ 1346.223846] [VIB]vibrator_enable, Binder_7(parent:zygote): vibrates 20 msec
<6>[ 1346.225830] [ATS][set_vibration][successful]
<6>[ 1346.226470] [TP]0x01 0x10 0x04 0xE0 0xBA
<6>[ 1346.234497] [TP]0x01 0x00 0x04 0xE0 0xBA
<6>[ 1346.244049] [VIB]vibrator_timer_func
<6>[ 1346.246185] [VIB]vibrator_enable, system_server(parent:zygote): vibrates 0 msec
<4>[ 1346.501281] mmc0: Starting deferred resume
<6>[ 1346.536163] mmc0: Deferred resume completed
<6>[ 1348.630187] [LS][CM3602] ALS value: 0x1, level: 0 #
<6>[ 1349.584503] [LS][CM3602] ALS value: 0x1, level: 0 #
<6>[ 1351.493347] [LS][CM3602] ALS value: 0x1, level: 0 #
<6>[ 1352.446197] [LS][CM3602] ALS value: 0x0, level: 0 #
<6>[ 1353.397735] [LS][CM3602] ALS value: 0x1, level: 0 #
<6>[ 1353.444274] [VIB]vibrator_enable, Binder_5(parent:zygote): vibrates 0 msec
<6>[ 1353.446075] [VIB]vibrator_enable, Binder_5(parent:zygote): vibrates 40 msec
<6>[ 1353.448638] [ATS][set_vibration][successful]
<6>[ 1353.487030] [VIB]vibrator_timer_func
<6>[ 1353.490905] [VIB]vibrator_enable, system_server(parent:zygote): vibrates 0 msec
<6>[ 1354.281616] [VIB]vibrator_enable, Binder_6(parent:zygote): vibrates 0 msec
<6>[ 1354.282409] [VIB]vibrator_enable, Binder_6(parent:zygote): vibrates 40 msec
<6>[ 1354.283630] [ATS][set_vibration][successful]
<6>[ 1354.322082] [VIB]vibrator_enable, system_server(parent:zygote): vibrates 0 msec
<6>[ 1354.352569] [LS][CM3602] ALS value: 0x0, level: 0 #
<6>[ 1354.485290] [VIB]vibrator_enable, Binder_5(parent:zygote): vibrates 0 msec
<6>[ 1354.485656] [VIB]vibrator_enable, Binder_5(parent:zygote): vibrates 40 msec
<6>[ 1354.487487] [ATS][set_vibration][successful]
<6>[ 1354.525695] [VIB]vibrator_enable, system_server(parent:zygote): vibrates 0 msec
<6>[ 1355.517639] [VIB]vibrator_enable, Binder_6(parent:zygote): vibrates 0 msec
<6>[ 1355.519195] [VIB]vibrator_enable, Binder_6(parent:zygote): vibrates 40 msec
<6>[ 1355.521972] [ATS][set_vibration][successful]
<6>[ 1355.559997] [VIB]vibrator_timer_func
<6>[ 1355.560882] [VIB]vibrator_enable, system_server(parent:zygote): vibrates 0 msec
<6>[ 1356.654571] [VIB]vibrator_enable, Binder_8(parent:zygote): vibrates 0 msec
<6>[ 1356.655517] [VIB]vibrator_enable, Binder_8(parent:zygote): vibrates 40 msec
<6>[ 1356.657775] [ATS][set_vibration][successful]
<6>[ 1356.695800] [VIB]vibrator_timer_func
<6>[ 1356.696807] [VIB]vibrator_enable, system_server(parent:zygote): vibrates 0 msec
<6>[ 1357.107116] [VIB]vibrator_enable, Binder_C(parent:zygote): vibrates 0 msec
<6>[ 1357.107574] [VIB]vibrator_enable, Binder_C(parent:zygote): vibrates 40 msec
<6>[ 1357.109466] [ATS][set_vibration][successful]
<6>[ 1357.148071] [VIB]vibrator_timer_func
<6>[ 1357.148376] [VIB]vibrator_enable, system_server(parent:zygote): vibrates 0 msec
<7>[ 1358.674652] set brightness = 129
<7>[ 1358.690612] set brightness = 128
<7>[ 1358.723083] set brightness = 127
<7>[ 1358.738952] set brightness = 126
<7>[ 1358.771362] set brightness = 125
<7>[ 1358.813781] set brightness = 124
<7>[ 1358.822143] set brightness = 123
<7>[ 1358.852478] set brightness = 122
<7>[ 1358.868103] set brightness = 121
<7>[ 1358.897460] set brightness = 120
<7>[ 1358.915985] set brightness = 119
<7>[ 1358.946319] set brightness = 118
<6>[ 1358.999664] [VIB]vibrator_enable, Binder_3(parent:zygote): vibrates 0 msec
<6>[ 1359.005554] [VIB]vibrator_enable, Binder_3(parent:zygote): vibrates 40 msec
<6>[ 1359.007843] [ATS][set_vibration][successful]
<7>[ 1359.020355] set brightness = 116
<7>[ 1359.042907] set brightness = 114
<6>[ 1359.046325] [VIB]vibrator_timer_func
<6>[ 1359.055908] [VIB]vibrator_enable, system_server(parent:zygote): vibrates 0 msec
<7>[ 1359.076965] set brightness = 113
<7>[ 1359.095489] set brightness = 112
<7>[ 1359.127929] set brightness = 111
<7>[ 1359.146545] set brightness = 110
<7>[ 1359.179290] set brightness = 109
<7>[ 1359.193878] set brightness = 108
<7>[ 1359.224548] set brightness = 107
<7>[ 1359.240997] set brightness = 106
<7>[ 1359.273956] set brightness = 105
<7>[ 1359.290832] set brightness = 104
<7>[ 1359.323242] set brightness = 103
<7>[ 1359.339385] set brightness = 102
<7>[ 1359.372131] set brightness = 101
<7>[ 1359.388427] set brightness = 100
<7>[ 1359.421112] set brightness = 99
<7>[ 1359.437469] set brightness = 98
<7>[ 1359.470092] set brightness = 97
<7>[ 1359.486419] set brightness = 96
<7>[ 1359.518341] set brightness = 95
<7>[ 1359.550781] set brightness = 94
<7>[ 1359.567871] set brightness = 93
<7>[ 1359.600036] set brightness = 92
<7>[ 1359.616271] set brightness = 91
<7>[ 1359.658966] set brightness = 90
<7>[ 1359.669250] set brightness = 89
<7>[ 1359.700836] set brightness = 88
<7>[ 1359.718017] set brightness = 87
<7>[ 1359.752288] set brightness = 86
<7>[ 1359.767395] set brightness = 85
<7>[ 1359.799713] set brightness = 84
<7>[ 1359.816284] set brightness = 83
<7>[ 1359.849334] set brightness = 82
<7>[ 1359.865905] set brightness = 81
<7>[ 1359.898895] set brightness = 80
<7>[ 1359.916839] set brightness = 79
<7>[ 1359.948638] set brightness = 78
<7>[ 1359.964538] set brightness = 77
<6>[ 1360.226806] [VIB]vibrator_enable, Binder_A(parent:zygote): vibrates 0 msec
<6>[ 1360.227416] [VIB]vibrator_enable, Binder_A(parent:zygote): vibrates 40 msec
<6>[ 1360.229156] [ATS][set_vibration][successful]
<6>[ 1360.267547] [VIB]vibrator_enable, system_server(parent:zygote): vibrates 0 msec
<6>[ 1362.330535] [VIB]vibrator_enable, Binder_2(parent:zygote): vibrates 0 msec
<6>[ 1362.330932] [VIB]vibrator_enable, Binder_2(parent:zygote): vibrates 40 msec
<6>[ 1362.332672] [ATS][set_vibration][successful]
<6>[ 1362.371154] [VIB]vibrator_timer_func
<6>[ 1362.372253] [VIB]vibrator_enable, system_server(parent:zygote): vibrates 0 msec
<6>[ 1362.995391] [VIB]vibrator_enable, Binder_1(parent:zygote): vibrates 0 msec
<6>[ 1362.995819] [VIB]vibrator_enable, Binder_1(parent:zygote): vibrates 40 msec
<6>[ 1362.997711] [ATS][set_vibration][successful]
<6>[ 1363.036010] [VIB]vibrator_timer_func
<6>[ 1363.036773] [VIB]vibrator_enable, system_server(parent:zygote): vibrates 0 msec
<6>[ 1363.793548] [VIB]vibrator_enable, Binder_A(parent:zygote): vibrates 0 msec
<6>[ 1363.793914] [VIB]vibrator_enable, Binder_A(parent:zygote): vibrates 40 msec
<6>[ 1363.795532] [ATS][set_vibration][successful]
<6>[ 1363.834167] [VIB]vibrator_timer_func
<6>[ 1363.835693] [VIB]vibrator_enable, system_server(parent:zygote): vibrates 0 msec
<6>[ 1364.608123] [VIB]vibrator_enable, Binder_3(parent:zygote): vibrates 0 msec
<6>[ 1364.610168] [VIB]vibrator_enable, Binder_3(parent:zygote): vibrates 40 msec
<6>[ 1364.617340] [ATS][set_vibration][successful]
<6>[ 1364.650909] [VIB]vibrator_timer_func
<6>[ 1364.657562] [VIB]vibrator_enable, system_server(parent:zygote): vibrates 0 msec
<6>[ 1365.004302] [VIB]vibrator_enable, Binder_8(parent:zygote): vibrates 0 msec
<6>[ 1365.004699] [VIB]vibrator_enable, Binder_8(parent:zygote): vibrates 40 msec
<6>[ 1365.006561] [ATS][set_vibration][successful]
<6>[ 1365.044708] [VIB]vibrator_enable, system_server(parent:zygote): vibrates 0 msec
<6>[ 1365.318572] [VIB]vibrator_enable, Binder_B(parent:zygote): vibrates 0 msec
<6>[ 1365.319030] [VIB]vibrator_enable, Binder_B(parent:zygote): vibrates 40 msec
<6>[ 1365.320922] [ATS][set_vibration][successful]
<6>[ 1365.359191] [VIB]vibrator_timer_func
<6>[ 1365.360046] [VIB]vibrator_enable, system_server(parent:zygote): vibrates 0 msec
<4>[ 1368.255187] wl_bss_connect_done succeeded with 20:4e:7f:9a:25:ae
<6>[ 1368.286682] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
<4>[ 1368.420562] wl_bss_connect_done succeeded with 20:4e:7f:9a:25:ae
<4>[ 1368.649902] Unknown PRIVATE command WLS_BATCHING GET - ignored
<4>[ 1368.654785] Unknown PRIVATE command WLS_BATCHING STOP - ignored
<6>[ 1369.570404] [LS][CM3602] ALS value: 0x4, level: 2 #
<6>[ 1370.675872] [RIL] wds: 0021 @ 01
<6>[ 1370.675994] [RIL] qmi: wds: network stopped
<6>[ 1370.676086] [RIL] wds: 0022 @ ff
<6>[ 1370.676269] [RIL] qmi: wds: DISCONNECTED
<6>[ 1370.676544] [RIL] rmnet_stop()
<6>[ 1372.789337] microp_led_pwm_brightness_set, data[1] = 0
<6>[ 1373.375976] [LS][CM3602] ALS value: 0xC, level: 3 #
<7>[ 1373.605133] set brightness = 78
<7>[ 1373.620910] set brightness = 79
<7>[ 1373.653381] set brightness = 80
<7>[ 1373.669616] set brightness = 81
<7>[ 1373.702819] set brightness = 82
<7>[ 1373.748138] set brightness = 83
<7>[ 1373.751098] set brightness = 84
<7>[ 1373.783660] set brightness = 85
<7>[ 1373.799591] set brightness = 86
<7>[ 1373.834899] set brightness = 87
<7>[ 1373.850646] set brightness = 88
<7>[ 1373.906097] set brightness = 90
<7>[ 1373.933197] set brightness = 91
<7>[ 1374.093627] set brightness = 95
<7>[ 1374.152069] set brightness = 99
<7>[ 1374.161773] set brightness = 100
<7>[ 1374.227386] set brightness = 103
<7>[ 1374.255737] set brightness = 104
<7>[ 1374.277648] set brightness = 105
<7>[ 1374.302703] set brightness = 106
<7>[ 1374.363861] set brightness = 108
<7>[ 1374.394622] set brightness = 109
<7>[ 1374.406616] set brightness = 110
<7>[ 1374.442657] set brightness = 111
<7>[ 1374.448944] set brightness = 112
<7>[ 1374.490234] set brightness = 113
<7>[ 1374.506256] set brightness = 114
<7>[ 1374.522399] set brightness = 115
<7>[ 1374.616027] set brightness = 118
<7>[ 1374.640960] set brightness = 119
<7>[ 1374.657775] set brightness = 120
<7>[ 1374.688049] set brightness = 121
<7>[ 1374.708068] set brightness = 122
<7>[ 1374.743103] set brightness = 123
<7>[ 1374.758178] set brightness = 124
<7>[ 1374.785064] set brightness = 125
<7>[ 1374.796844] set brightness = 126
<7>[ 1374.829284] set brightness = 127
<7>[ 1374.845428] set brightness = 128
<7>[ 1374.877899] set brightness = 129
<7>[ 1374.895141] set brightness = 130
<7>[ 1374.927642] set brightness = 131
<7>[ 1374.962005] set brightness = 132
<7>[ 1374.978027] set brightness = 133
<7>[ 1375.010223] set brightness = 134
<7>[ 1375.027832] set brightness = 135
<7>[ 1375.059173] set brightness = 136
<7>[ 1375.075256] set brightness = 137
<7>[ 1375.108032] set brightness = 138
<7>[ 1375.123931] set brightness = 139
<7>[ 1375.156341] set brightness = 140
<7>[ 1375.194091] set brightness = 141
<7>[ 1375.205322] set brightness = 142
<7>[ 1375.237762] set brightness = 143
<7>[ 1375.254425] set brightness = 144
<7>[ 1375.290496] set brightness = 145
<7>[ 1375.302551] set brightness = 146
<7>[ 1375.336059] set brightness = 147
<7>[ 1375.350738] set brightness = 148
<6>[ 1376.229949] [LS][CM3602] ALS value: 0x1, level: 0 #
<6>[ 1377.060974] gpio_event_input_irq_handler, irq=512, use_irq=1
<6>[ 1377.071899] gpio_keys_scan_keys: key 1-66, 4 (192) changed to 1
<6>[ 1377.077209] microp_led_pwm_brightness_set, data[1] = 255
<6>[ 1377.183776] [LS][CM3602] ALS value: 0x0, level: 0 #
<6>[ 1377.221008] gpio_event_input_irq_handler, irq=512, use_irq=1
<6>[ 1377.231933] gpio_keys_scan_keys: key 1-66, 4 (192) changed to 0
<6>[ 1378.382995] [VIB]vibrator_enable, Binder_C(parent:zygote): vibrates 0 msec
<6>[ 1378.386627] [VIB]vibrator_enable, Thread-99(parent:zygote): vibrates 10 msec
<6>[ 1378.387573] [ATS][set_vibration][successful]
<6>[ 1378.397186] [VIB]vibrator_timer_func
<6>[ 1378.417205] [VIB]vibrator_enable, Thread-99(parent:zygote): vibrates 30 msec
<6>[ 1378.418121] [ATS][set_vibration][successful]
<6>[ 1378.447265] [VIB]vibrator_timer_func
<7>[ 1380.204315] wlan0: no IPv6 routers present
<7>[ 1384.260833] set brightness = 147
<7>[ 1384.292510] set brightness = 146
<7>[ 1384.362091] set brightness = 144
<7>[ 1384.379241] set brightness = 143
<7>[ 1384.405670] set brightness = 142
<7>[ 1384.422027] set brightness = 141
<7>[ 1384.439208] set brightness = 140
<7>[ 1384.470642] set brightness = 139
<7>[ 1384.503265] set brightness = 138
<7>[ 1384.525878] set brightness = 137
<7>[ 1384.542572] set brightness = 136
<7>[ 1384.576507] set brightness = 135
<7>[ 1384.595520] set brightness = 134
<7>[ 1384.624450] set brightness = 133
<7>[ 1384.642272] set brightness = 132
<7>[ 1384.672210] set brightness = 131
<7>[ 1384.690277] set brightness = 130
<7>[ 1384.719909] set brightness = 129
<7>[ 1384.736419] set brightness = 128
<7>[ 1384.768768] set brightness = 127
<7>[ 1384.829467] set brightness = 125
<7>[ 1384.877410] set brightness = 124
<7>[ 1384.881072] set brightness = 123
<7>[ 1384.910064] set brightness = 122
<7>[ 1384.919555] set brightness = 121
<7>[ 1384.957580] set brightness = 120
<7>[ 1384.969268] set brightness = 119
<7>[ 1384.996368] set brightness = 118
<7>[ 1385.026672] set brightness = 117
<7>[ 1385.041229] set brightness = 116
<7>[ 1385.073455] set brightness = 115
<7>[ 1385.092712] set brightness = 114
<7>[ 1385.122680] set brightness = 113
<7>[ 1385.138885] set brightness = 112
<7>[ 1385.181823] set brightness = 111
<7>[ 1385.200653] set brightness = 110
<7>[ 1385.219238] set brightness = 109
<7>[ 1385.235382] set brightness = 108
<7>[ 1385.270294] set brightness = 107
<7>[ 1385.303405] set brightness = 106
<7>[ 1385.319488] set brightness = 105
<7>[ 1385.381713] set brightness = 103
<7>[ 1385.406921] set brightness = 102
<7>[ 1385.426147] set brightness = 101
<7>[ 1385.456542] set brightness = 100
<7>[ 1385.473144] set brightness = 99
<7>[ 1385.508087] set brightness = 98
<7>[ 1385.528167] set brightness = 97
<7>[ 1385.597564] set brightness = 95
<7>[ 1385.607299] set brightness = 94
<7>[ 1385.633789] set brightness = 93
<7>[ 1385.651489] set brightness = 92
<7>[ 1385.675354] set brightness = 91
<7>[ 1385.699432] set brightness = 90
<7>[ 1385.725341] set brightness = 89
<7>[ 1385.756134] set brightness = 88
<7>[ 1385.776062] set brightness = 87
<7>[ 1385.813110] set brightness = 86
<7>[ 1385.826232] set brightness = 85
<7>[ 1385.841918] set brightness = 84
<7>[ 1385.874786] set brightness = 83
<7>[ 1385.901611] set brightness = 82
<7>[ 1385.931030] set brightness = 81
<7>[ 1385.948211] set brightness = 80
<7>[ 1385.976043] set brightness = 79
<7>[ 1385.998931] set brightness = 78
<7>[ 1386.024932] set brightness = 77
<6>[ 1388.449157] [VIB]vibrator_enable, dumplogcat(parent:init): vibrates 150 msec
Broadcasting: Intent { act=com.evervolv.toolbox.action.DUMPLOGCAT_FINISHED (has extras) }
Broadcast completed: result=0