Evervolv Paste

Logcat: ev_tenderloin-6.0.1-nightly-2016.05.14

From EVLogcat Uploader, 8 Years ago, written in Plain Text, viewed 961 times.
URL http://paste.evervolv.com/view/acb6ef78 Embed
Download Paste or View Raw
  1. ------ LAST KMSG (/proc/last_klog) ------
  2. platform_init_mmu_mappings: entry
  3. platform_init_mmu_mappings:57: mapping shared ram as uncached at 0x40000000
  4. platform_init_mmu_mappings: exit
  5. platform_init_timer: entry
  6. platform_init_timer: exit
  7. platform_set_periodic_timer:39: cb 0x4010c6bd, arg 0x0, interval 10
  8. ******************************************
  9. * Welcome to bootie!
  10. *   Version: 468
  11. ******************************************
  12. mmch_init: entry
  13. mmch_init: exit
  14. usbc: initialized (rc=0)
  15. target_init_buttonscan: entry
  16. target_init_board_id: emu=0, product=0x1, hwbuild=1
  17. boardtype=topaz-Wifi-pvt
  18. Memory bank 0 -> address: 0x40200000-0x46700000 size:0x06500000
  19. Memory bank 1 -> address: 0x48000000-0x7ff00000 size:0x37F00000
  20. i2c_init: Register GSBI 3 as i2c bus 0
  21. i2c_init_clock: The i2c clock rate is 19200000
  22. i2c_init: Register GSBI 4 as i2c bus 1
  23. i2c_init_clock: The i2c clock rate is 19200000
  24. i2c_init: Register GSBI 9 as i2c bus 2
  25. i2c_init_clock: The i2c clock rate is 19200000
  26. i2c_init: Register GSBI 8 as i2c bus 3
  27. i2c_init_clock: The i2c clock rate is 19200000
  28. i2c_init: Register GSBI 7 as i2c bus 4
  29. i2c_init_clock: The i2c clock rate is 19200000
  30. a6_init_sbw_pins: TCK: 157, TDIO; 158, WKUP: 155
  31. max8903b_gpio_init
  32. Starting battery authentication...
  33. Battery auth succeeded
  34. sys_init: entry
  35. Wall message(Boot reason) = 0x77665502 ("recovery")
  36. sys_init: booted because 'recovery'
  37. mmch_reset: entry
  38. Bus(0) Primecell ID regs:
  39. 0x80 0x11 0x4 0x0
  40. 0xd 0xf0 0x5 0xb1
  41. sdc1_clk_set 400000
  42. mmch_set_active:727: bus 0, active 1
  43. sdc1_clk_set 400000
  44. mmch_reset: exit
  45. mmch_set_active:727: bus 0, active 1
  46. sdc1_clk_set 400000
  47. cid: 0x2010053 0x454d3332 0x4790b0aa 0x96785eee
  48.         mfg id: 0x2
  49.         oem id: 0x100
  50.         name: 'SEM32G'
  51.         rev: 0x90
  52.         sn: 0xb0aa9678
  53.         date: 5.2011
  54. sdc1_clk_set 50000000
  55. token section is 10240 bytes long
  56. target_check_boot_condition: entry
  57. Wall message(Boot reason) = 0x77665502 ("recovery")
  58. display_init: displayWidth: 1024, displayHeight: 768
  59. Wall message(Boot reason) = 0x77665502 ("recovery")
  60. p=58 ca=3062400 v=3713680 i=-358125
  61. autobooting with 'fsboot' command
  62. loading file '/boot/uImage' to address 0x41000000
  63. parse_uimage:241: uimage 0x41000000
  64. <6>[    0.000000] Booting Linux on physical CPU 0
  65. <6>[    0.000000] Initializing cgroup subsys cpu
  66. <5>[    0.000000] Linux version 3.4.82-tenderloin+ (flintman@mx.thenoblealliance.com) (gcc version 4.8 (GCC) ) #1 SMP PREEMPT Tue Dec 23 13:58:38 EST 2014
  67. <1>[    0.000000] CPU: ARMv7 Processor [510f02d2] revision 2 (ARMv7), cr=10c5387d
  68. <1>[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIVT ASID tagged instruction cache
  69. <1>[    0.000000] Machine: tenderloin
  70. <6>[    0.000000] memory pool 3 (start 76400000 size 9200000) initialized
  71. <1>[    0.000000] Memory policy: ECC disabled, Data cache writealloc
  72. <3>[    0.000000] smem_find(137, 80): wrong size 64
  73. <3>[    0.000000] smem_find(137, 72): wrong size 64
  74. <6>[    0.000000] socinfo_init: v5, id=86, ver=2.0, raw_id=1696, raw_ver=1696, hw_plat=0,  hw_plat_ver=65536
  75. <6>[    0.000000]  accessory_chip=0
  76. <7>[    0.000000] On node 0 totalpages: 215296
  77. <7>[    0.000000] free_area_init_node: node 0, pgdat 80958200, node_mem_map 80bea000
  78. <7>[    0.000000]   Normal zone: 2024 pages used for memmap
  79. <7>[    0.000000]   Normal zone: 0 pages reserved
  80. <7>[    0.000000]   Normal zone: 213272 pages, LIFO batch:31
  81. <6>[    0.000000] passing from bootie 9437184 bytes at 7f600000 physical for fb
  82. <6>[    0.000000] PERCPU: Embedded 8 pages/cpu @813df000 s11904 r8192 d12672 u32768
  83. <7>[    0.000000] pcpu-alloc: s11904 r8192 d12672 u32768 alloc=8*4096
  84. <7>[    0.000000] pcpu-alloc: [0] 0 [0] 1
  85. <1>[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 213272
  86. <5>[    0.000000] Kernel command line: androidboot.selinux=permissive root=/dev/ram0 rootwait ro fbcon=disable console=ttyS0,115200n8 androidboot.serialno=DKPT2DPCLKA2FJKAFTR872EI4L033SV6  fb=0x7f600000 nduid=d86ee2a56659a21f6255faf64748394a28138f73 klog=0x7ff00000 klog_len=0x100000 boardtype=topaz-Wifi-pvt lastboot=recovery
  87. <6>[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
  88. <6>[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  89. <6>[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  90. <6>[    0.000000] allocated 2072576 bytes of page_cgroup
  91. <6>[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
  92. <6>[    0.000000] Memory: 101MB 740MB = 841MB total
  93. <5>[    0.000000] Memory: 834564k/834564k available, 176124k reserved, 0K highmem
  94. <5>[    0.000000] Virtual kernel memory layout:
  95. <5>[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
  96. <5>[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
  97. <5>[    0.000000]     vmalloc : 0xbf800000 - 0xff000000   (1016 MB)
  98. <5>[    0.000000]     lowmem  : 0x80000000 - 0xbf400000   (1012 MB)
  99. <5>[    0.000000]     pkmap   : 0x7fe00000 - 0x80000000   (   2 MB)
  100. <5>[    0.000000]     modules : 0x7f000000 - 0x7fe00000   (  14 MB)
  101. <5>[    0.000000]       .text : 0x80008000 - 0x8086c6e0   (8594 kB)
  102. <5>[    0.000000]       .init : 0x8086d000 - 0x808afe80   ( 268 kB)
  103. <5>[    0.000000]       .data : 0x808b0000 - 0x80977100   ( 797 kB)
  104. <5>[    0.000000]        .bss : 0x80977124 - 0x80be5508   (2489 kB)
  105. <6>[    0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
  106. <6>[    0.000000] Preemptible hierarchical RCU implementation.
  107. <6>[    0.000000] NR_IRQS:855
  108. <6>[    0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms
  109. <6>[    0.000000] Switching to timer-based delay loop
  110. <7>[    0.000000] ODEBUG: 2 of 2 active objects replaced
  111. <6>[    0.001892] Calibrating delay loop (skipped), value calculated using timer frequency.. 13.50 BogoMIPS (lpj=67500)
  112. <6>[    0.001922] pid_max: default: 32768 minimum: 301
  113. <6>[    0.002227] Security Framework initialized
  114. <6>[    0.002288] SELinux:  Initializing.
  115. <7>[    0.002380] SELinux:  Starting in permissive mode
  116. <6>[    0.002502] Mount-cache hash table entries: 512
  117. <6>[    0.004394] Initializing cgroup subsys cpuacct
  118. <6>[    0.004394] Initializing cgroup subsys memory
  119. <6>[    0.004486] Initializing cgroup subsys freezer
  120. <6>[    0.004547] CPU: Testing write buffer coherency: ok
  121. <6>[    0.004852] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  122. <6>[    0.004882] hw perfevents: enabled with ARMv7 Scorpion-MP PMU driver, 5 counters available
  123. <6>[    0.005035] Setting up static identity map for 0x407efd80 - 0x407efde4
  124. <6>[    0.037017] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  125. <6>[    0.037200] Brought up 2 CPUs
  126. <6>[    0.037200] SMP: Total of 2 processors activated (27.00 BogoMIPS).
  127. <6>[    0.057098] dummy:
  128. <6>[    0.057739] NET: Registered protocol family 16
  129. <6>[    0.058746] DMA: preallocated 256 KiB pool for atomic coherent allocations
  130. <3>[    0.058959] AXI: msm_bus_fabric_init_driver(): msm_bus_fabric_init_driver
  131. <6>[    0.060241] meminfo_init: smem ram ptable found: ver: 0 len: 7
  132. <6>[    0.060272] Found 2 memory banks grouped into 16 memory regions
  133. <6>[    0.060607] gpiochip_add: registered GPIOs 0 to 172 on device: msmgpio
  134. <6>[    0.061645] msm_tsens_early_init: done
  135. <6>[    0.061676] msm_rpm_init: RPM firmware 2.0.67653
  136. <1>[    0.061859] Choosing tenderloin_pins_wifi
  137. <3>[    0.093658] msm_rpm_get_status(): Status id 433 not defined for target
  138. <3>[    0.123168] tenderloin_init_gpiomux: >= TOPAZ_DVT
  139. <6>[    0.124542] saw_probe: id=0, name=8901_s0
  140. <6>[    0.125183] saw_probe: id=1, name=8901_s1
  141. <6>[    0.132354] pm8058_probe: PMIC revision: E3
  142. <6>[    0.134582] gpiochip_add: registered GPIOs 173 to 212 on device: pm-gpio
  143. <6>[    0.135009] pm_gpio_probe: OK: base=173, ngpio=40
  144. <6>[    0.135406] gpiochip_add: registered GPIOs 213 to 224 on device: pm8xxx-mpp
  145. <6>[    0.135467] pm8xxx_mpp_probe: OK: base=213, ngpio=12
  146. <6>[    0.138397] pm8901_probe: PMIC revision reg: F4
  147. <6>[    0.138427] pm8901_probe: PMIC version: PM8901 rev 2.1
  148. <6>[    0.139373] gpiochip_add: registered GPIOs 225 to 228 on device: pm8xxx-mpp
  149. <6>[    0.139434] pm8xxx_mpp_probe: OK: base=225, ngpio=4
  150. <3>[    0.144744] Registering a6_0 device.
  151. <3>[    0.144805] Registering a6_1 device.
  152. <4>[    0.146301] 8058_s3: Failed to create debugfs directory
  153. <6>[    0.146697] board_setup_S3A_1V8: 8058_s3: forcing HPM mode (2)
  154. <7>[    0.146697] tenderloin_init_keypad
  155. <3>[    0.147094] tenderloin_init: --
  156. <6>[    0.147155] hw-breakpoint: found 3 (+1 reserved) breakpoint and 1 watchpoint registers.
  157. <6>[    0.147155] hw-breakpoint: maximum watchpoint size is 8 bytes.
  158. <6>[    0.189971] bio: create slab <bio-0> at 0
  159. <7>[    0.191497] reg-fixed-voltage reg-fixed-voltage.0: vdd50_boost supplying 5000000uV
  160. <6>[    0.193664] ION heap vmalloc created
  161. <6>[    0.193786] ION heap mm created at 38200000 with size 6600000
  162. <6>[    0.193817] ION heap mm_fw created at 38000000 with size 200000
  163. <6>[    0.193908] ION heap mfc created at 3e800000 with size 2000
  164. <6>[    0.194183] ION heap sf created at 76401000 with size 4000000
  165. <6>[    0.194458] ION heap camera_preview created at 7a401000 with size 4200000
  166. <6>[    0.194549] ION heap audio created at 7e601000 with size 4cf000
  167. <5>[    0.194824] pmic8058_pwm_probe: OK
  168. <6>[    0.194976] klog_init: phys buffer at 0x7ff00000
  169. <6>[    0.195068] klog_init: virt address at 0xbfe00000
  170. <6>[    0.195098] klog_init: found valid klog, len 1048576
  171. <6>klog_init: using buffer 0 at 0xbfe00024, length 262116
  172. <6>klog_init: last_klog head=127667 tail=127668 size=262115
  173. <6>klog_init: last_klog2 head=211748 tail=0 size=211748
  174. <6>klog_init: last_klog3 head=229848 tail=229849 size=262115
  175. <5>SCSI subsystem initialized
  176. <6>usbcore: registered new interface driver usbfs
  177. <6>usbcore: registered new interface driver hub
  178. <6>usbcore: registered new device driver usb
  179. <6>input: pmic8xxx_pwrkey as /devices/platform/msm_ssbi.0/pm8058-core/pm8xxx-pwrkey/input/input0
  180. <6>Advanced Linux Sound Architecture Driver Version 1.0.25.
  181. <6>Bluetooth: Core ver 2.16
  182. <6>NET: Registered protocol family 31
  183. <6>Bluetooth: HCI device and connection manager initialized
  184. <6>Bluetooth: HCI socket layer initialized
  185. <6>Bluetooth: L2CAP socket layer initialized
  186. <6>Bluetooth: SCO socket layer initialized
  187. <6>cfg80211: Calling CRDA to update world regulatory domain
  188. <6>Switching to clocksource gp_timer
  189. <6>NET: Registered protocol family 2
  190. <6>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
  191. <6>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
  192. <6>TCP bind hash table entries: 65536 (order: 8, 1310720 bytes)
  193. <6>TCP: Hash tables configured (established 131072 bind 65536)
  194. <6>TCP: reno registered
  195. <6>UDP hash table entries: 512 (order: 2, 24576 bytes)
  196. <6>UDP-Lite hash table entries: 512 (order: 2, 24576 bytes)
  197. <6>NET: Registered protocol family 1
  198. <6>Trying to unpack rootfs image as initramfs...
  199. <6>Freeing initrd memory: 3560K
  200. <6>Detected 5 counters on the L2CC PMU.
  201. <6>pil_qdsp6v3 pil_qdsp6v3: using non-secure boot
  202. <3>smd_channel_probe_worker: allocation table not initialized
  203. <6>snddev_icodec_probe: msm_codec_i2s_slave_mode = 0
  204. <4>8058_s4: Failed to create debugfs directory
  205. <6>dspcrashd_probe: Platform driver values: Base = 0x46700000, Size = 0x2000000,pdata = 0xdeaddead
  206. <6>Max ACPU freq: 1782000 KHz
  207. <4>8901_s0: Failed to create debugfs directory
  208. <4>8901_s1: Failed to create debugfs directory
  209. <6>CPU0: 28 scaling frequencies supported.
  210. <6>CPU1: 28 scaling frequencies supported.
  211. <6>audit: initializing netlink socket (disabled)
  212. <5>type=2000 audit(0.540:1): initialized
  213. <6>fuse init (API version 7.18)
  214. <6>msgmni has been set to 1636
  215. <7>SELinux:  Registering netfilter hooks
  216. <6>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
  217. <6>io scheduler noop registered
  218. <6>io scheduler deadline registered
  219. <6>io scheduler row registered (default)
  220. <6>io scheduler cfq registered
  221. <6>
  222.  msm_vidc_enc: Inside vid_enc_init()<6>
  223.  msm_vidc_enc: Inside vid_enc_vcd_init()<6>msm_serial_hs module loaded
  224. <6>[BT]msm_serial_hs module loaded
  225. <6>msm_serial_hsl: detected port #0
  226. <6>msm_serial_hsl.0: ttyHSL0 at MMIO 0x19c40000 (irq = 227) is a MSM
  227. <6>msm_serial_hsl: driver initialized
  228. <6>msm_rotator_probe: rotator_hw_revision=1
  229. <6>kgsl kgsl-3d0: |kgsl_gpummu_init| MMU type set for device is GPUMMU
  230. <6>kgsl kgsl-2d0: |kgsl_gpummu_init| MMU type set for device is GPUMMU
  231. <6>kgsl kgsl-2d1: |kgsl_gpummu_init| MMU type set for device is GPUMMU
  232. <6>brd: module loaded
  233. <6>loop: module loaded
  234. <6>lkdtm: No crash points registered, enable through debugfs
  235. <6>pmem: Initializing pmem_adsp as non-cached
  236. <3>pmem: Cannot allocate from reserved memory for pmem_adsp
  237. <4>android_pmem: probe of android_pmem.2 failed with error -1
  238. <6>pmem: Initializing pmem_audio as non-cached
  239. <6>allocating 5042176 bytes at 7ead0000 physical for pmem_audio
  240. <4>8058_l18: Failed to create debugfs directory
  241. <6>Before a6 call to i2c_add_driver.
  242. <3>a6_init_state: enabling A6 internal wake.
  243. <3>a6_init_state: TS2_I2C_WAKEUP_PERIOD = 0x1b
  244. <6>A6 Version: HW: 255, FW (M.m.B): 2.13.25, ManID: 28769, ProdTyp: 1281
  245. <5>A6 driver initialized successfully!
  246. <3>a6_init_state: enabling A6 internal wake.
  247. <3>a6_init_state: TS2_I2C_WAKEUP_PERIOD = 0x1b
  248. <6>A6 Version: HW: 255, FW (M.m.B): 2.7.29, ManID: 28769, ProdTyp: 1793
  249. <5>A6 driver initialized successfully!
  250. <4>i2c-core: driver [a6] using legacy suspend method
  251. <4>i2c-core: driver [a6] using legacy resume method
  252. <6>nduid: d86ee2a56659a21f6255faf64748394a28138f73
  253. <3>hsuart_rxtx_lists_init: init 80ad716c
  254. <3>hsuart_rxtx_lists_init: init 80ad71a0
  255. hsuart_tty:created 'ttyHS0' device on UART 0
  256. mdmgpio_init
  257. mdmgpio_probe
  258. <3>msm_wm8958_setup_power: codec power setup
  259. <4>vdd50_boost: Failed to create debugfs directory
  260. <4>8058_s3: Failed to create debugfs directory
  261. <3>wm8994_ldo_power: Power up the WM8994 LDOs
  262. <6>wm8994 4-001a: WM8958 revision B
  263. <4>wm8994 4-001a: No interrupt specified, no interrupts
  264. <7>gpiochip_find_base: found new base at 501
  265. <6>gpiochip_add: registered GPIOs 501 to 511 on device: wm8994
  266. <6>SCSI Media Changer driver v0.25
  267. <6>PPP generic driver version 2.4.2
  268. <6>PPP BSD Compression module registered
  269. <6>PPP Deflate Compression module registered
  270. <6>PPP MPPE Compression module registered
  271. <6>NET: Registered protocol family 24
  272. <6>SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
  273. <6>CSLIP: code copyright 1989 Regents of the University of California.
  274. <4>8058_s1: Failed to create debugfs directory
  275. <4>8058_l6: Failed to create debugfs directory
  276. <4>8058_l7: Failed to create debugfs directory
  277. <6>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  278. <3>Rate 2147483647 for jpegd_clk is greater than highest Fmax
  279. <6>host driver registered w/ tranceiver
  280. <6>usbcore: registered new interface driver cdc_acm
  281. <6>cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
  282. <6>usbcore: registered new interface driver cdc_wdm
  283. <6>Initializing USB Mass Storage driver...
  284. <6>usbcore: registered new interface driver usb-storage
  285. <6>USB Mass Storage support registered.
  286. <6>usbcore: registered new interface driver ums-alauda
  287. <6>usbcore: registered new interface driver ums-cypress
  288. <6>usbcore: registered new interface driver ums-datafab
  289. <6>usbcore: registered new interface driver ums-freecom
  290. <6>usbcore: registered new interface driver ums-isd200
  291. <6>usbcore: registered new interface driver ums-jumpshot
  292. <6>usbcore: registered new interface driver ums-karma
  293. <6>usbcore: registered new interface driver ums-onetouch
  294. <6>usbcore: registered new interface driver ums-sddr09
  295. <6>usbcore: registered new interface driver ums-sddr55
  296. <6>usbcore: registered new interface driver ums-usbat
  297. <6>usbcore: registered new interface driver usbserial
  298. <6>usbserial: USB Serial Driver core
  299. <6>usbcore: registered new interface driver usb_ehset_test
  300. <6>peripheral driver registered w/ tranceiver
  301. <6>mbim_init: initialize 1 instances
  302. <6>mbim_init: Initialized 1 ports
  303. <6>rndis_qc_init: initialize rndis QC instance
  304. <6>android_usb gadget: Mass Storage Function, version: 2009/09/11
  305. <6>android_usb gadget: Number of LUNs=1
  306. <6> lun0: LUN: removable file: (no medium)
  307. <6>android_usb gadget: android_usb ready
  308. <4>8058_l10: Failed to create debugfs directory
  309. <4>vdd50_boost: Failed to create debugfs directory
  310. <6>GPIO Input Driver: Start gpio inputs for tenderloin-keypad in interrupt mode
  311. <6>input: tenderloin-keypad as /devices/virtual/input/input1
  312. <6>i2c i2c-0: mpu3050: +lsm303dlha
  313. <6>i2c i2c-0: mpu3050: +lsm303dlhm
  314. <4>i2c i2c-0: WARNING: Compass irq not assigned
  315. <4>i2c i2c-0: mpu3050: No Pressure Present
  316. <4>ODEBUG: object is on stack, but not annotated
  317. <4>------------[ cut here ]------------
  318. <4>WARNING: at /home/flintman/source/ever/lollipop/kernel/htc/msm8960/lib/debugobjects.c:302 __debug_object_init+0x2bc/0x374()
  319. <d>Modules linked in:
  320. [<80015020>] (unwind_backtrace+0x0/0x11c) from [<8007781c>] (warn_slowpath_common+0x4c/0x64)
  321. [<8007781c>] (warn_slowpath_common+0x4c/0x64) from [<800778c4>] (warn_slowpath_null+0x18/0x20)
  322. [<800778c4>] (warn_slowpath_null+0x18/0x20) from [<80228440>] (__debug_object_init+0x2bc/0x374)
  323. [<80228440>] (__debug_object_init+0x2bc/0x374) from [<8009425c>] (hrtimer_init+0x18/0x30)
  324. [<8009425c>] (hrtimer_init+0x18/0x30) from [<80082340>] (do_nsleep+0x2c/0xf4)
  325. [<80082340>] (do_nsleep+0x2c/0xf4) from [<8008241c>] (hr_msleep+0x14/0x1c)
  326. [<8008241c>] (hr_msleep+0x14/0x1c) from [<8039ec38>] (MLDLPowerMgmtMPU+0x194/0x4a8)
  327. [<8039ec38>] (MLDLPowerMgmtMPU+0x194/0x4a8) from [<803a03e4>] (mpu3050_open+0xa4/0x4bc)
  328. [<803a03e4>] (mpu3050_open+0xa4/0x4bc) from [<8039ccc0>] (mpu3050_probe+0x3a4/0x6b4)
  329. [<8039ccc0>] (mpu3050_probe+0x3a4/0x6b4) from [<803a9ee0>] (i2c_device_probe+0xb8/0x100)
  330. [<803a9ee0>] (i2c_device_probe+0xb8/0x100) from [<802ca8b0>] (driver_probe_device+0x134/0x328)
  331. [<802ca8b0>] (driver_probe_device+0x134/0x328) from [<802cab50>] (__driver_attach+0x68/0x8c)
  332. [<802cab50>] (__driver_attach+0x68/0x8c) from [<802c8e20>] (bus_for_each_dev+0x70/0x84)
  333. [<802c8e20>] (bus_for_each_dev+0x70/0x84) from [<802c9ec8>] (bus_add_driver+0x10c/0x258)
  334. [<802c9ec8>] (bus_add_driver+0x10c/0x258) from [<802cb098>] (driver_register+0x9c/0x114)
  335. [<802cb098>] (driver_register+0x9c/0x114) from [<803abcd0>] (i2c_register_driver+0x40/0xdc)
  336. [<803abcd0>] (i2c_register_driver+0x40/0xdc) from [<8088f298>] (mpu_init+0x10/0x60)
  337. [<8088f298>] (mpu_init+0x10/0x60) from [<800085e0>] (do_one_initcall+0x8c/0x150)
  338. [<800085e0>] (do_one_initcall+0x8c/0x150) from [<8086db98>] (kernel_init+0x104/0x1c0)
  339. [<8086db98>] (kernel_init+0x104/0x1c0) from [<8000f4f8>] (kernel_thread_exit+0x0/0x8)
  340. <4>---[ end trace 62dd78ffa9698cb2 ]---
  341. <6>gpio_keys_scan_keys: key 1-73, 0 (103) changed to 0
  342. <6>gpio_keys_scan_keys: key 1-72, 1 (104) changed to 0
  343. <6>gpio_keys_scan_keys: key 1-ac, 2 (40) changed to 0
  344. <3>ulpi_read: timeout 48300000
  345. <6>i2c i2c-0: Installing irq using 381
  346. <6>i2c i2c-0: Module Param interface = mpuirq
  347. <4>i2c-core: driver [mpu3050] using legacy suspend method
  348. <4>i2c-core: driver [mpu3050] using legacy resume method
  349. <7>mpu_init
  350. <6><6>lsm303dlh magnetometer driver
  351. <3>lsm303dlh_mag_sysfs: probe start
  352. <6>input: lsm303dlh_mag_sysfs as /devices/i2c-0/0-001e/input/input2
  353. <6>lsm303dlh_mag_sysfs 0-001e: lsm303dlh_mag probed
  354. <7>lsm303dlh_acc_sysfs accelerometer driver: init
  355. <6>lsm303dlh_acc_sysfs: probe start.
  356. <6>lsm303dlh_acc_sysfs: hw init start
  357. <6>lsm303dlh_acc_sysfs: hw init done
  358. <6>input: lsm303dlh_acc_sysfs as /devices/i2c-0/0-0018/input/input3
  359. <6>lsm303dlh_acc_sysfs 0-0018: lsm303dlh_acc_sysfs: probed
  360. <4>i2c-core: driver [lsm303dlh_acc_sysfs] using legacy suspend method
  361. <4>i2c-core: driver [lsm303dlh_acc_sysfs] using legacy resume method
  362. <4>------------[ cut here ]------------
  363. <4>WARNING: at /home/flintman/source/ever/lollipop/kernel/htc/msm8960/lib/debugobjects.c:262 debug_print_object+0x8c/0xb4()
  364. <3>ODEBUG: assert_init not available (active state 0) object type: timer_list hint: stub_timer+0x0/0x10
  365. <d>Modules linked in:
  366. [<80015020>] (unwind_backtrace+0x0/0x11c) from [<8007781c>] (warn_slowpath_common+0x4c/0x64)
  367. [<8007781c>] (warn_slowpath_common+0x4c/0x64) from [<80077860>] (warn_slowpath_fmt+0x2c/0x3c)
  368. [<80077860>] (warn_slowpath_fmt+0x2c/0x3c) from [<8022815c>] (debug_print_object+0x8c/0xb4)
  369. [<8022815c>] (debug_print_object+0x8c/0xb4) from [<80228aac>] (debug_object_assert_init+0xac/0xd4)
  370. [<80228aac>] (debug_object_assert_init+0xac/0xd4) from [<80082760>] (del_timer+0x14/0xb0)
  371. [<80082760>] (del_timer+0x14/0xb0) from [<8008d5b0>] (__cancel_work_timer+0x20/0x100)
  372. [<8008d5b0>] (__cancel_work_timer+0x20/0x100) from [<803a4e48>] (isl29023_set_power_state+0x74/0x80)
  373. [<803a4e48>] (isl29023_set_power_state+0x74/0x80) from [<805df6f8>] (isl29023_probe+0x188/0x374)
  374. [<805df6f8>] (isl29023_probe+0x188/0x374) from [<803a9ee0>] (i2c_device_probe+0xb8/0x100)
  375. [<803a9ee0>] (i2c_device_probe+0xb8/0x100) from [<802ca8b0>] (driver_probe_device+0x134/0x328)
  376. [<802ca8b0>] (driver_probe_device+0x134/0x328) from [<802cab50>] (__driver_attach+0x68/0x8c)
  377. [<802cab50>] (__driver_attach+0x68/0x8c) from [<802c8e20>] (bus_for_each_dev+0x70/0x84)
  378. [<802c8e20>] (bus_for_each_dev+0x70/0x84) from [<802c9ec8>] (bus_add_driver+0x10c/0x258)
  379. [<802c9ec8>] (bus_add_driver+0x10c/0x258) from [<802cb098>] (driver_register+0x9c/0x114)
  380. [<802cb098>] (driver_register+0x9c/0x114) from [<803abcd0>] (i2c_register_driver+0x40/0xdc)
  381. [<803abcd0>] (i2c_register_driver+0x40/0xdc) from [<800085e0>] (do_one_initcall+0x8c/0x150)
  382. [<800085e0>] (do_one_initcall+0x8c/0x150) from [<8086db98>] (kernel_init+0x104/0x1c0)
  383. [<8086db98>] (kernel_init+0x104/0x1c0) from [<8000f4f8>] (kernel_thread_exit+0x0/0x8)
  384. <4>---[ end trace 62dd78ffa9698cb3 ]---
  385. <6>input: isl29023 light sensor as /devices/virtual/input/input4
  386. isl29023 input_dev success
  387. <6>isl29023 0-0044: driver version 1.0 enabled
  388. <4>i2c-core: driver [isl29023] using legacy suspend method
  389. <4>i2c-core: driver [isl29023] using legacy resume method
  390. <6>using rtc device, pm8xxx_rtc, for alarms<6>rtc-pm8xxx rtc-pm8xxx: rtc core: registered pm8xxx_rtc as rtc0
  391. <6>i2c /dev entries driver
  392. <6>lirc_dev: IR Remote Control driver registered, major 240
  393. <6>IR RC5 (streamzap) protocol handler initialized
  394. <6>IR SANYO protocol handler initialized
  395. <6>IR MCE Keyboard/mouse protocol handler initialized
  396. <6>IR LIRC bridge handler initialized
  397. <6>Linux video capture interface: v2.00
  398. +++ config_camera_on_gpios_web_cam_mt9m113
  399. <4>8058_lvs0: Failed to create debugfs directory
  400. config_camera_on_gpios_web_cam_mt9m113:enable the regulator votg_lvs0 succeed
  401. <4>8058_l11: Failed to create debugfs directory
  402. config_camera_on_gpios_web_cam_mt9m113:enable the regulator votg_vreg_l11 succeed
  403. --- config_camera_on_gpios_web_cam_mt9m113
  404. <4>fs_vfe: Failed to create debugfs directory
  405. <3>ulpi_read: timeout 48300000
  406. <3>ulpi_read: timeout 48300000
  407. +++ config_camera_off_gpios_web_cam_mt9m113
  408. config_camera_off_gpios_web_cam_mt9m113:disable the regulator: votg_lvs0 succeed
  409. config_camera_off_gpios_web_cam_mt9m113:disable the regulator: votg_vreg_l11 succeed
  410. --- config_camera_off_gpios_web_cam_mt9m113
  411. <6>msm_sync_init: initialized mt9m113
  412. <6>max8903b driver registeration! rc = 0
  413. <6>msm_adc successfully registered
  414. <5>tsens_tm_init: OK
  415. <6>device-mapper: uevent: version 1.0.3
  416. <6>device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
  417. <6>device-mapper: multipath: version 1.3.0 loaded
  418. <6>device-mapper: multipath round-robin: version 1.0.0 loaded
  419. <6>device-mapper: multipath queue-length: version 0.1.0 loaded
  420. <6>device-mapper: multipath service-time: version 0.2.0 loaded
  421. <6>cpuidle: using governor ladder
  422. <6>cpuidle: using governor menu
  423. <6>mmc0: SDCC Version: 0x00000000
  424. <3>mmc0: No card detect facilities available
  425. <4>8901_l5: Failed to create debugfs directory
  426. <4>8901_lvs0: Failed to create debugfs directory
  427. <6>mmc0: Qualcomm MSM SDCC-core at 0x0000000012400000 irq 136,0 dma 18 dmacrcri 1
  428. <6>mmc0: Controller capabilities: 0x00000001
  429. <6>mmc0: 8 bit data mode enabled
  430. <6>mmc0: 4 bit data mode disabled
  431. <6>mmc0: polling status mode disabled
  432. <6>mmc0: MMC clock 400000 -> 48000000 Hz, PCLK 0 Hz
  433. <6>mmc0: Slot eject status = 0
  434. <6>mmc0: Power save feature enable = 1
  435. <6>mmc0: DM non-cached buffer at bf8e6000, dma_addr 0x746e0000
  436. <6>mmc0: DM cmd busaddr 0x746e0000, cmdptr busaddr 0x746f7f40
  437. <6>mmc1: SDCC Version: 0x00000000
  438. <3>mmc1: No card detect facilities available
  439. <4>8058_s3: Failed to create debugfs directory
  440. <6>mmc1: Qualcomm MSM SDCC-core at 0x00000000121c0000 irq 133,0 dma 21 dmacrcri 5
  441. <6>mmc1: Controller capabilities: 0x00000001
  442. <6>mmc1: 8 bit data mode disabled
  443. <6>mmc1: 4 bit data mode enabled
  444. <6>mmc1: polling status mode disabled
  445. <6>mmc1: MMC clock 400000 -> 48000000 Hz, PCLK 0 Hz
  446. <6>mmc1: Slot eject status = 0
  447. <6>mmc1: Power save feature enable = 1
  448. <6>mmc1: DM non-cached buffer at bfb01000, dma_addr 0x74700000
  449. <6>mmc1: DM cmd busaddr 0x74700000, cmdptr busaddr 0x74717f40
  450. tenderloin_probe_wifi: id 4 mmc b44d0000
  451. <3>board_sdio_wifi_enable
  452. <4>8058_s3: Failed to create debugfs directory
  453. <4>8901_l3: Failed to create debugfs directory
  454. <4>8901_l1: Failed to create debugfs directory
  455. <4>8058_l19: Failed to create debugfs directory
  456. <6>wifi_power(1) 1.8V sdio: set load
  457. <6>tenderloin_wifi_power: New regulator mode for 8058_s3: 2
  458. <6>wifi_power(1) 3.3V
  459. <6>wifi_power(1) 8901_l1 3.3V
  460. <6>wifi_power(1) 8058_l19 1.8V
  461. wifi_power(1) CHIP_PWD
  462. <7>LM8502 module init called
  463. <7>LM8502 probe called
  464. <3>ulpi_read: timeout 48300000
  465. <3>ulpi_read: timeout 48300000
  466. <3>qup_i2c qup_i2c.3: QUP: I2C status flags :0x1343c8, irq:193
  467. <3>qup_i2c qup_i2c.3: I2C slave addr:0x33 not connected
  468. <3>Unable to read LM8502 registers
  469. <6>mmc0: disabling BKOPS
  470. <7>Registered led device: core_navi_left
  471. <7>Registered led device: core_navi_right
  472. <6>mmc0: new high speed MMC card at address 0001
  473. <6>mmcblk0: mmc0:0001 SEM32G 29.7 GiB
  474. <4>i2c-core: driver [LM8502] using legacy suspend method
  475. <4>i2c-core: driver [LM8502] using legacy resume method
  476. <6>usbcore: registered new interface driver usbhid
  477. <6>usbhid: USB HID core driver
  478. <6>ashmem: initialized
  479. <6>logger: created 256K log 'log_main'
  480. <6>logger: created 256K log 'log_events'
  481. <6>logger: created 256K log 'log_radio'
  482. <6>logger: created 256K log 'log_system'
  483. <6>msm-cpu-dai msm-cpu-dai.0: asoc_msm_cpu_probe: dev name msm-cpu-dai.0
  484. <6>msm-codec-dai msm-codec-dai.0: asoc_msm_codec_probe: dev name msm-codec-dai.0
  485. <6>msm-dsp-audio msm-dsp-audio.0: msm_pcm_probe: dev name msm-dsp-audio.0
  486. <3>msm_wm8958_shutdown_power: codec power shutdown
  487. <4>vdd50_boost: Failed to create debugfs directory
  488. <3>wm8994_ldo_power: Power down the WM8994 LDOs
  489. <6> mmcblk0: p1 p2 p3 p4 < p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 >
  490. <6>asoc: wm8994-aif1 <-> msm-cpu-dai.0 mapping ok
  491. <6>asoc: wm8994-aif2 <-> msm-cpu-dai.0 mapping ok
  492. <6>input: msm-audio headset as /devices/platform/soc-audio/sound/card0/input5
  493. <6>GACT probability NOT on
  494. <6>Mirror/redirect action on
  495. Failed to load ipt action
  496. <6>u32 classifier
  497. <6>    Performance counters on
  498. <6>    input device check on
  499. <6>    Actions configured
  500. <6>Netfilter messages via NETLINK v0.30.
  501. <6>nf_conntrack version 0.5.0 (13095 buckets, 52380 max)
  502. <6>ctnetlink v0.93: registering with nfnetlink.
  503. <6>NF_TPROXY: Transparent proxy support initialized, version 4.1.0
  504. <6>NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
  505. <6>xt_time: kernel timezone is -0000
  506. <6>ip_tables: (C) 2000-2006 Netfilter Core Team
  507. <6>arp_tables: (C) 2002 David S. Miller
  508. <6>TCP: cubic registered
  509. <6>NET: Registered protocol family 10
  510. <6>Mobile IPv6
  511. <6>ip6_tables: (C) 2000-2006 Netfilter Core Team
  512. <6>IPv6 over IPv4 tunneling driver
  513. <6>NET: Registered protocol family 17
  514. <6>NET: Registered protocol family 15
  515. <6>Bluetooth: RFCOMM TTY layer initialized
  516. <6>Bluetooth: RFCOMM socket layer initialized
  517. <6>Bluetooth: RFCOMM ver 1.11
  518. <6>Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  519. <6>Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  520. <6>L2TP core driver, V2.0
  521. <6>PPPoL2TP kernel driver, V2.0
  522. <6>L2TP IP encapsulation support (L2TPv3)
  523. <6>L2TP netlink interface
  524. <6>L2TP ethernet pseudowire support (L2TPv3)
  525. <3>lcdc_tenderloin_panel_init: +++++++++++++++++++++++
  526. <3>lcdc_tenderloin_probe: ++
  527. <6>Lcdc_tenderloin_probe: bl_pwm0=b5bbe000 LPG_chan0=0
  528. <6>setting pdata->panel_info.fb_num to 3. type: 3
  529. <4>------------[ cut here ]------------
  530. <4>WARNING: at /home/flintman/source/ever/lollipop/kernel/htc/msm8960/arch/arm/mach-msm/clock-local.c:424 rcg_clk_prepare+0x2c/0x48()
  531. Attempting to prepare pixel_mdp_clk before setting its rate. Set the rate first!
  532. <d>Modules linked in:
  533. [<80015020>] (unwind_backtrace+0x0/0x11c) from [<8007781c>] (warn_slowpath_common+0x4c/0x64)
  534. [<8007781c>] (warn_slowpath_common+0x4c/0x64) from [<80077860>] (warn_slowpath_fmt+0x2c/0x3c)
  535. [<80077860>] (warn_slowpath_fmt+0x2c/0x3c) from [<800593a0>] (rcg_clk_prepare+0x2c/0x48)
  536. [<800593a0>] (rcg_clk_prepare+0x2c/0x48) from [<80020920>] (clk_prepare+0x94/0xd8)
  537. [<80020920>] (clk_prepare+0x94/0xd8) from [<80257af8>] (cont_splash_clk_ctrl.part.0+0x14/0x70)
  538. [<80257af8>] (cont_splash_clk_ctrl.part.0+0x14/0x70) from [<80257d90>] (lcdc_probe+0xc4/0x200)
  539. [<80257d90>] (lcdc_probe+0xc4/0x200) from [<802cbb58>] (platform_drv_probe+0x14/0x18)
  540. [<802cbb58>] (platform_drv_probe+0x14/0x18) from [<802ca8b0>] (driver_probe_device+0x134/0x328)
  541. [<802ca8b0>] (driver_probe_device+0x134/0x328) from [<802c8ebc>] (bus_for_each_drv+0x74/0x88)
  542. [<802c8ebc>] (bus_for_each_drv+0x74/0x88) from [<802ca70c>] (device_attach+0x80/0xa4)
  543. [<802ca70c>] (device_attach+0x80/0xa4) from [<802c9c34>] (bus_probe_device+0x28/0x98)
  544. [<802c9c34>] (bus_probe_device+0x28/0x98) from [<802c8434>] (device_add+0x434/0x580)
  545. [<802c8434>] (device_add+0x434/0x580) from [<802cbed4>] (platform_device_add+0x134/0x1a0)
  546. [<802cbed4>] (platform_device_add+0x134/0x1a0) from [<8023daa0>] (msm_fb_add_device+0x148/0x1a8)
  547. [<8023daa0>] (msm_fb_add_device+0x148/0x1a8) from [<805d3e8c>] (lcdc_tenderloin_probe+0x78/0x98)
  548. [<805d3e8c>] (lcdc_tenderloin_probe+0x78/0x98) from [<802cbb58>] (platform_drv_probe+0x14/0x18)
  549. [<802cbb58>] (platform_drv_probe+0x14/0x18) from [<802ca8b0>] (driver_probe_device+0x134/0x328)
  550. [<802ca8b0>] (driver_probe_device+0x134/0x328) from [<802c8ebc>] (bus_for_each_drv+0x74/0x88)
  551. [<802c8ebc>] (bus_for_each_drv+0x74/0x88) from [<802ca70c>] (device_attach+0x80/0xa4)
  552. [<802ca70c>] (device_attach+0x80/0xa4) from [<802c9c34>] (bus_probe_device+0x28/0x98)
  553. [<802c9c34>] (bus_probe_device+0x28/0x98) from [<802c8434>] (device_add+0x434/0x580)
  554. [<802c8434>] (device_add+0x434/0x580) from [<802cbed4>] (platform_device_add+0x134/0x1a0)
  555. [<802cbed4>] (platform_device_add+0x134/0x1a0) from [<80063c10>] (lcdc_tenderloin_device_register+0x7c/0xcc)
  556. [<80063c10>] (lcdc_tenderloin_device_register+0x7c/0xcc) from [<808792a0>] (lcdc_tenderloin_panel_init+0xa8/0xd8)
  557. [<808792a0>] (lcdc_tenderloin_panel_init+0xa8/0xd8) from [<800085e0>] (do_one_initcall+0x8c/0x150)
  558. [<800085e0>] (do_one_initcall+0x8c/0x150) from [<8086db98>] (kernel_init+0x104/0x1c0)
  559. [<8086db98>] (kernel_init+0x104/0x1c0) from [<8000f4f8>] (kernel_thread_exit+0x0/0x8)
  560. <4>---[ end trace 62dd78ffa9698cb4 ]---
  561. <3>ulpi_read_with_reset: ulpi read failed for 5 times
  562. <3>ulpi_write: timeout
  563. <3>ulpi_write: timeout
  564. <6>FrameBuffer[0] 1024x768 size=9437184 bytes is registered successfully!
  565. <4>load_565rle_image: Can not open /initlogo.rle
  566. <7>Registered led device: lcd-backlight
  567. <6>mdp4_lcdc_vsync_init: ndx=0
  568. <6>VFP support v0.3: implementor 51 architecture 64 part 2d variant 0 rev 0
  569. <5>Registering SWP/SWPB emulation handler
  570. <6>clock_late_init: Removing enables held for handed-off clocks
  571. <4>mmc1: queuing unknown CIS tuple 0x01 (3 bytes)
  572. <6>MSM Watchdog Initialized
  573. <6>[MPDEC]: msm_mpdec_init init complete.<4>8058_l5: Failed to create debugfs directory
  574. <4>8058_l5: Failed to create debugfs directory
  575. <4>8058_l5: Failed to create debugfs directory
  576. <6>rtc-pm8xxx rtc-pm8xxx: setting system clock to 2016-05-16 07:12:10 UTC (1463382730)
  577. <6>msm_v4l2: msm_v4l2_init
  578. <6>ALSA device list:
  579. <6>  #0: msm-audio
  580. <4>Warning: unable to open an initial console.
  581. <6>Freeing init memory: 264K
  582. <4>mmc1: queuing unknown CIS tuple 0x1a (5 bytes)
  583. <4>mmc1: queuing unknown CIS tuple 0x1b (8 bytes)
  584. <4>mmc1: queuing unknown CIS tuple 0x14 (0 bytes)
  585. <4>mmc1: queuing unknown CIS tuple 0x80 (1 bytes)
  586. <4>mmc1: queuing unknown CIS tuple 0x81 (1 bytes)
  587. <4>mmc1: queuing unknown CIS tuple 0x82 (1 bytes)
  588. <6>mmc1: new high speed SDIO card at address 0001
  589. <7>SELinux: 2048 avtab hash slots, 4357 rules.
  590. <7>SELinux: 2048 avtab hash slots, 4357 rules.
  591. <7>SELinux:  1 users, 2 roles, 358 types, 0 bools, 1 sens, 1024 cats
  592. <7>SELinux:  86 classes, 4357 rules
  593. <7>SELinux:  Completing initialization.
  594. <7>SELinux:  Setting up existing superblocks.
  595. <7>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
  596. <7>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
  597. <7>SELinux: initialized (dev bdev, type bdev), not configured for labeling
  598. <7>SELinux: initialized (dev proc, type proc), uses genfs_contexts
  599. <7>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
  600. <7>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
  601. <7>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
  602. <7>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
  603. <7>SELinux: initialized (dev anon_inodefs, type anon_inodefs), not configured for labeling
  604. <7>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
  605. <7>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
  606. <7>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
  607. <7>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
  608. <6>msm_otg_suspend: usb in low power mode
  609. <5>type=1403 audit(1463382730.700:2): policy loaded auid=4294967295 ses=4294967295
  610. <3>init: /init.recovery.tenderloin.rc: 77: ignored duplicate definition of service 'ueventd'
  611. <3>init: /init.recovery.tenderloin.rc: 80: ignored duplicate definition of service 'recovery'
  612. <3>init: /init.recovery.tenderloin.rc: 82: ignored duplicate definition of service 'adbd'
  613. <6>init: command 'loglevel 7' action=early-init status=0 (/init.rc:6)
  614. <6>init: command 'setenforce 0' action=early-init status=0 (/init.rc:7)
  615. <6>init: command 'setcon u:r:init:s0' action=early-init status=0 (/init.rc:10)
  616. <5>init: starting 'ueventd'
  617. <6>init: command 'start ueventd' action=early-init status=0 (/init.rc:12)
  618. <5>init: starting 'healthd'
  619. <6>init: command 'start healthd' action=early-init status=0 (/init.rc:13)
  620. <6>init: processing action 0x76d24610 (early-init)
  621. <6>init: command 'start ueventd' action=early-init status=0 (/init.recovery.tenderloin.rc:2)
  622. <6>init: command 'setenforce 0' action=early-init status=0 (/init.recovery.tenderloin.rc:3)
  623. <6>init: processing action 0x76d24790 (wait_for_coldboot_done)
  624. <6>init: wait for /dev/.coldboot_done
  625. <3>healthd: wakealarm_init: timerfd_create failed
  626. <3>init: invalid uid 'fm_radio'
  627. <3>init: invalid uid 'felicaclient'
  628. <3>init: invalid uid 'felicaclient'
  629. <3>init: invalid uid 'felicalock'
  630. <3>init: invalid uid 'felicaclient'
  631. <3>init: invalid uid 'felicaclient'
  632. <3>init: invalid uid 'felicaclient'
  633. <3>init: invalid uid 'felicaclient'
  634. <3>init: invalid uid 'felicaclient'
  635. <3>init: invalid uid 'autobot_access'
  636. <6>healthd: battery l=56 v=3633 t=26.0 h=2 st=3 c=-922 chg=
  637. <6>healthd: battery l=56 v=3633 t=26.0 h=2 st=3 c=-922 chg=
  638. <6>healthd: battery l=56 v=3633 t=26.0 h=2 st=3 c=-922 chg=
  639. <6>healthd: battery l=56 v=3633 t=26.0 h=2 st=3 c=-922 chg=
  640. <6>init: command 'wait_for_coldboot_done' action=wait_for_coldboot_done status=0 ((null):0)
  641. <6>init: processing action 0x76d247c0 (mix_hwrng_into_linux_rng)
  642. <3>init: /dev/hw_random not found
  643. <6>init: command 'mix_hwrng_into_linux_rng' action=mix_hwrng_into_linux_rng status=0 ((null):0)
  644. <6>init: processing action 0x76d247f0 (keychord_init)
  645. <6>init: command 'keychord_init' action=keychord_init status=0 ((null):0)
  646. <6>init: processing action 0x76d24820 (console_init)
  647. <6>init: command 'console_init' action=console_init status=0 ((null):0)
  648. <6>init: processing action 0x76d242b0 (init)
  649. <6>init: command 'export PATH /sbin:/system/bin' action=init status=0 (/init.rc:20)
  650. <6>init: command 'export LD_LIBRARY_PATH .:/sbin' action=init status=0 (/init.rc:21)
  651. <6>init: command 'export ANDROID_ROOT /system' action=init status=0 (/init.rc:22)
  652. <6>init: command 'export ANDROID_DATA /data' action=init status=0 (/init.rc:23)
  653. <6>init: command 'export EXTERNAL_STORAGE /sdcard' action=init status=0 (/init.rc:24)
  654. <6>init: command 'mkdir /boot' action=init status=0 (/init.rc:26)
  655. <6>init: command 'mkdir /recovery' action=init status=0 (/init.rc:27)
  656. <6>init: command 'mkdir /system' action=init status=0 (/init.rc:28)
  657. <6>init: command 'mkdir /data' action=init status=0 (/init.rc:29)
  658. <6>init: command 'mkdir /cache' action=init status=0 (/init.rc:30)
  659. <6>init: command 'mkdir /sideload' action=init status=0 (/init.rc:31)
  660. <7>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
  661. <6>init: command 'mount tmpfs tmpfs /tmp' action=init status=0 (/init.rc:32)
  662. <6>init: command 'chown root shell /tmp' action=init status=0 (/init.rc:34)
  663. <6>init: command 'chmod 0775 /tmp' action=init status=0 (/init.rc:35)
  664. <6>init: command 'write /proc/sys/kernel/panic_on_oops 1' action=init status=0 (/init.rc:37)
  665. <6>init: processing action 0x76d24640 (init)
  666. <6>init: command 'export PATH /sbin' action=init status=0 (/init.recovery.tenderloin.rc:6)
  667. <6>init: command 'export LD_LIBRARY_PATH .:/sbin' action=init status=0 (/init.recovery.tenderloin.rc:7)
  668. <6>init: command 'export ANDROID_ROOT /system' action=init status=0 (/init.recovery.tenderloin.rc:8)
  669. <6>init: command 'export ANDROID_DATA /data' action=init status=0 (/init.recovery.tenderloin.rc:9)
  670. <6>init: command 'export EXTERNAL_STORAGE /sdcard' action=init status=0 (/init.recovery.tenderloin.rc:10)
  671. <6>init: command 'symlink /system/etc /etc' action=init status=-1 (/init.recovery.tenderloin.rc:12)
  672. <6>init: command 'mkdir /boot' action=init status=0 (/init.recovery.tenderloin.rc:14)
  673. <6>init: command 'mkdir /sdcard' action=init status=0 (/init.recovery.tenderloin.rc:15)
  674. <6>init: command 'mkdir /internal_sd' action=init status=0 (/init.recovery.tenderloin.rc:16)
  675. <6>init: command 'mkdir /external_sd' action=init status=0 (/init.recovery.tenderloin.rc:17)
  676. <6>init: command 'mkdir /sd-ext' action=init status=0 (/init.recovery.tenderloin.rc:18)
  677. <6>init: command 'mkdir /datadata' action=init status=0 (/init.recovery.tenderloin.rc:19)
  678. <6>init: command 'mkdir /emmc' action=init status=0 (/init.recovery.tenderloin.rc:20)
  679. <6>init: command 'mkdir /system' action=init status=0 (/init.recovery.tenderloin.rc:21)
  680. <6>init: command 'mkdir /data' action=init status=0 (/init.recovery.tenderloin.rc:22)
  681. <6>init: command 'mkdir /cache' action=init status=0 (/init.recovery.tenderloin.rc:23)
  682. <6>init: command 'mount /tmp /tmp tmpfs' action=init status=-1 (/init.recovery.tenderloin.rc:24)
  683. <6>init: command 'chown root shell /tmp' action=init status=0 (/init.recovery.tenderloin.rc:26)
  684. <6>init: command 'chmod 0775 /tmp' action=init status=0 (/init.recovery.tenderloin.rc:27)
  685. <6>kjournald starting.  Commit interval 5 seconds
  686. <6>EXT3-fs (mmcblk0p13): using internal journal
  687. <6>EXT3-fs (mmcblk0p13): mounted filesystem with writeback data mode
  688. <7>SELinux: initialized (dev mmcblk0p13, type ext3), uses xattr
  689. <6>init: command 'mount ext3 /dev/block/mmcblk0p13 /boot wait noatime barrier=1' action=init status=0 (/init.recovery.tenderloin.rc:33)
  690. <6>init: command 'symlink /boot/lib /lib' action=init status=0 (/init.recovery.tenderloin.rc:36)
  691. <5>type=1400 audit(1463382731.500:3): avc:  denied  { execute } for  pid=105 comm="init" name="busybox" dev="mmcblk0p13" ino=25 scontext=u:r:init:s0 tcontext=u:object_r:unlabeled:s0 tclass=file
  692. <5>type=1400 audit(1463382731.500:4): avc:  denied  { execute_no_trans } for  pid=105 comm="init" path="/boot/bin/busybox" dev="mmcblk0p13" ino=25 scontext=u:r:init:s0 tcontext=u:object_r:unlabeled:s0 tclass=file
  693. <5>type=1400 audit(1463382731.730:5): avc:  denied  { create } for  pid=106 comm="lvm.static" name=".lvm_(none)_106_1025927740" scontext=u:r:init:s0 tcontext=u:object_r:rootfs:s0 tclass=file
  694. <5>type=1400 audit(1463382731.730:6): avc:  denied  { append } for  pid=106 comm="lvm.static" name=".lvm_(none)_106_1025927740" dev="rootfs" ino=4786 scontext=u:r:init:s0 tcontext=u:object_r:rootfs:s0 tclass=file
  695. <5>type=1400 audit(1463382731.740:7): avc:  denied  { link } for  pid=106 comm="lvm.static" name=".lvm_(none)_106_1025927740" dev="rootfs" ino=4786 scontext=u:r:init:s0 tcontext=u:object_r:rootfs:s0 tclass=file
  696. <5>type=1400 audit(1463382731.740:8): avc:  denied  { unlink } for  pid=106 comm="lvm.static" name=".lvm_(none)_106_1025927740" dev="rootfs" ino=4786 scontext=u:r:init:s0 tcontext=u:object_r:rootfs:s0 tclass=file
  697. <5>type=1400 audit(1463382731.740:9): avc:  denied  { rename } for  pid=106 comm="lvm.static" name=".lvm_(none)_106_1775552887" dev="rootfs" ino=4790 scontext=u:r:init:s0 tcontext=u:object_r:rootfs:s0 tclass=file
  698. <5>type=1400 audit(1463382731.800:10): avc:  denied  { create } for  pid=106 comm="lvm.static" name="store-media" scontext=u:r:init:s0 tcontext=u:object_r:device:s0 tclass=blk_file
  699. <5>type=1400 audit(1463382731.800:11): avc:  denied  { setattr } for  pid=106 comm="lvm.static" name="store-media" dev="tmpfs" ino=4805 scontext=u:r:init:s0 tcontext=u:object_r:device:s0 tclass=blk_file
  700. <5>type=1400 audit(1463382731.930:12): avc:  denied  { write } for  pid=106 comm="lvm.static" name=".cache" dev="rootfs" ino=4849 scontext=u:r:init:s0 tcontext=u:object_r:rootfs:s0 tclass=file
  701. <6>init: command 'exec /boot/bin/sh -c LVM_SYSTEM_DIR=/lvm /boot/usr/sbin/lvm.static vgchange -ay' action=init status=0 (/init.recovery.tenderloin.rc:37)
  702. <6>init: command 'rm /lib' action=init status=0 (/init.recovery.tenderloin.rc:39)
  703. <6>init: command 'rm /boot/moboot.next' action=init status=0 (/init.recovery.tenderloin.rc:40)
  704. <3>enable_store: android_usb: already disabled
  705. <6>init: command 'write /sys/class/android_usb/android0/enable 0' action=init status=0 (/init.recovery.tenderloin.rc:42)
  706. <6>init: command 'write /sys/class/android_usb/android0/idVendor 18D1' action=init status=0 (/init.recovery.tenderloin.rc:43)
  707. <6>init: command 'write /sys/class/android_usb/android0/idProduct 0c86' action=init status=0 (/init.recovery.tenderloin.rc:44)
  708. <6>init: command 'write /sys/class/android_usb/android0/functions mass_storage,adb' action=init status=0 (/init.recovery.tenderloin.rc:45)
  709. <6>init: command 'write /sys/class/android_usb/android0/iManufacturer ${ro.product.manufacturer}' action=init status=0 (/init.recovery.tenderloin.rc:46)
  710. <6>init: command 'write /sys/class/android_usb/android0/iProduct ${ro.product.model}' action=init status=0 (/init.recovery.tenderloin.rc:47)
  711. <6>init: command 'write /sys/class/android_usb/android0/iSerial ${ro.serialno}' action=init status=0 (/init.recovery.tenderloin.rc:48)
  712. <6>init: processing action 0x76d24850 (mix_hwrng_into_linux_rng)
  713. <3>init: /dev/hw_random not found
  714. <6>init: command 'mix_hwrng_into_linux_rng' action=mix_hwrng_into_linux_rng status=0 ((null):0)
  715. <6>init: processing action 0x76d24880 (property_service_init)
  716. <6>init: Created socket '/dev/socket/property_service' with mode '666', user '0', group '0'
  717. <6>init: command 'property_service_init' action=property_service_init status=0 ((null):0)
  718. <6>init: processing action 0x76d248b0 (signal_init)
  719. <6>init: command 'signal_init' action=signal_init status=0 ((null):0)
  720. <6>init: processing action 0x76d24460 (late-init)
  721. <6>init: command 'trigger early-fs' action=late-init status=0 (/init.rc:67)
  722. <6>init: command 'trigger fs' action=late-init status=0 (/init.rc:68)
  723. <6>init: command 'trigger post-fs' action=late-init status=0 (/init.rc:69)
  724. <6>init: command 'trigger post-fs-data' action=late-init status=0 (/init.rc:70)
  725. <6>init: command 'trigger load_all_props_action' action=late-init status=0 (/init.rc:75)
  726. <6>init: command 'trigger early-boot' action=late-init status=0 (/init.rc:77)
  727. <6>init: command 'trigger boot' action=late-init status=0 (/init.rc:78)
  728. <6>init: processing action 0x76d248e0 (queue_property_triggers)
  729. <6>init: command 'queue_property_triggers' action=queue_property_triggers status=0 ((null):0)
  730. <6>init: processing action 0x76d24340 (fs)
  731. <6>init: command 'mkdir /dev/usb-ffs 0770 shell shell' action=fs status=0 (/init.rc:40)
  732. <6>init: command 'mkdir /dev/usb-ffs/adb 0770 shell shell' action=fs status=0 (/init.rc:41)
  733. <6>init: command 'mount functionfs adb /dev/usb-ffs/adb uid=2000,gid=2000' action=fs status=-1 (/init.rc:42)
  734. <6>init: command 'write /sys/class/android_usb/android0/enable 0' action=fs status=0 (/init.rc:44)
  735. <6>init: command 'write /sys/class/android_usb/android0/idVendor 18D1' action=fs status=0 (/init.rc:45)
  736. <6>init: command 'write /sys/class/android_usb/android0/idProduct D002' action=fs status=0 (/init.rc:46)
  737. <6>init: command 'write /sys/class/android_usb/android0/f_ffs/aliases adb' action=fs status=-2 (/init.rc:47)
  738. <6>init: command 'write /sys/class/android_usb/android0/functions adb' action=fs status=0 (/init.rc:48)
  739. <6>init: command 'write /sys/class/android_usb/android0/iManufacturer ${ro.product.manufacturer}' action=fs status=0 (/init.rc:49)
  740. <6>init: command 'write /sys/class/android_usb/android0/iProduct ${ro.product.model}' action=fs status=0 (/init.rc:50)
  741. <6>init: command 'write /sys/class/android_usb/android0/iSerial ${ro.serialno}' action=fs status=0 (/init.rc:51)
  742. <6>init: processing action 0x76d24430 (load_all_props_action)
  743. <3>init: Unable to open persistent property directory /data/property errno: 2
  744. <6>init: command 'load_all_props' action=load_all_props_action status=0 (/init.rc:63)
  745. <6>init: processing action 0x76d24400 (boot)
  746. <6>init: command 'ifup lo' action=boot status=0 (/init.rc:55)
  747. <6>init: command 'hostname localhost' action=boot status=0 (/init.rc:56)
  748. <6>init: command 'domainname localdomain' action=boot status=0 (/init.rc:57)
  749. <5>init: starting 'set_permissive'
  750. <6>init: computing context for service '/sbin/recovery'
  751. <3>init: Warning!  Service recovery needs a SELinux domain defined; please fix!
  752. <5>init: starting 'recovery'
  753. <6>init: computing context for service '/sbin/ts_srv'
  754. <3>init: Warning!  Service tsdriver needs a SELinux domain defined; please fix!
  755. <5>init: starting 'tsdriver'
  756. <6>init: command 'class_start default' action=boot status=0 (/init.rc:59)
  757. <6>init: waitpid returned pid 114, status = 0000ff00
  758. <5>init: process 'set_permissive', pid 114 exited
  759. <6>init: processing action 0x76d24700 (boot)
  760. <6>init: command 'write /sys/module/rpm_resources/enable_low_power/L2_cache 1' action=boot status=0 (/init.recovery.tenderloin.rc:53)
  761. <6>init: command 'write /sys/module/rpm_resources/enable_low_power/pxo 1' action=boot status=0 (/init.recovery.tenderloin.rc:54)
  762. <6>init: command 'write /sys/module/rpm_resources/enable_low_power/vdd_dig 1' action=boot status=0 (/init.recovery.tenderloin.rc:55)
  763. <6>init: command 'write /sys/module/rpm_resources/enable_low_power/vdd_mem 1' action=boot status=0 (/init.recovery.tenderloin.rc:56)
  764. <6>init: command 'write /sys/module/pm_8x60/modes/cpu0/power_collapse/suspend_enabled 1' action=boot status=0 (/init.recovery.tenderloin.rc:57)
  765. <6>init: command 'write /sys/module/pm_8x60/modes/cpu1/power_collapse/suspend_enabled 1' action=boot status=0 (/init.recovery.tenderloin.rc:58)
  766. <6>init: command 'write /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor ondemand' action=boot status=-22 (/init.recovery.tenderloin.rc:59)
  767. <6>init: command 'write /sys/devices/system/cpu/cpu1/cpufreq/scaling_governor ondemand' action=boot status=-22 (/init.recovery.tenderloin.rc:60)
  768. <6>init: command 'write /sys/devices/system/cpu/cpufreq/ondemand/up_threshold 90' action=boot status=-2 (/init.recovery.tenderloin.rc:61)
  769. <6>init: command 'write /sys/devices/system/cpu/cpufreq/ondemand/sampling_rate 50000' action=boot status=-2 (/init.recovery.tenderloin.rc:62)
  770. <6>init: command 'write /sys/devices/system/cpu/cpufreq/ondemand/sampling_down_factor 4' action=boot status=-2 (/init.recovery.tenderloin.rc:63)
  771. <6>init: command 'write /sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq 384000' action=boot status=0 (/init.recovery.tenderloin.rc:64)
  772. <6>init: command 'write /sys/devices/system/cpu/cpu1/cpufreq/scaling_min_freq 384000' action=boot status=0 (/init.recovery.tenderloin.rc:65)
  773. <6>init: command 'write /sys/devices/system/cpu/cpu1/online 0' action=boot status=0 (/init.recovery.tenderloin.rc:66)
  774. <6>init: command 'ifup lo' action=boot status=0 (/init.recovery.tenderloin.rc:68)
  775. <6>init: command 'hostname localhost' action=boot status=0 (/init.recovery.tenderloin.rc:69)
  776. <6>init: command 'domainname localdomain' action=boot status=0 (/init.recovery.tenderloin.rc:70)
  777. <6>init: command 'class_start default' action=boot status=0 (/init.recovery.tenderloin.rc:72)
  778. <6>init: processing action 0x76d245b0 (property:ro.debuggable=1)
  779. <6>init: command 'setprop service.adb.root 1' action=property:ro.debuggable=1 status=0 (/init.rc:131)
  780. <6>init: processing action 0x76d24730 (property:ro.debuggable=1)
  781. <6>init: command 'setprop service.adb.root 1' action=property:ro.debuggable=1 status=0 (/init.recovery.tenderloin.rc:87)
  782. <6>init: processing action 0x76d245e0 (property:service.adb.root=1)
  783. <6>init: command 'write /sys/class/android_usb/android0/enable 0' action=property:service.adb.root=1 status=0 (/init.rc:135)
  784. <5>init: starting 'adbd'
  785. <6>init: command 'restart adbd' action=property:service.adb.root=1 status=0 (/init.rc:136)
  786. <6>init: command 'write /sys/class/android_usb/android0/enable 1' action=property:service.adb.root=1 status=0 (/init.rc:137)
  787. <6>init: processing action 0x76d24760 (property:service.adb.root=1)
  788. <6>init: command 'write /sys/class/android_usb/android0/enable 0' action=property:service.adb.root=1 status=0 (/init.recovery.tenderloin.rc:91)
  789. <5>init: service 'adbd' is being killed
  790. <6>init: command 'restart adbd' action=property:service.adb.root=1 status=0 (/init.recovery.tenderloin.rc:92)
  791. <6>init: command 'write /sys/class/android_usb/android0/enable 1' action=property:service.adb.root=1 status=0 (/init.recovery.tenderloin.rc:93)
  792. <6>init: Created socket '/dev/socket/adbd' with mode '660', user '1000', group '1000'
  793. <3>[DISP] lcdc_panel_power: ++ 1
  794. <4>8058_l10: Failed to create debugfs directory
  795. <6>adb_open
  796. <6>input: HPTouchpad as /devices/virtual/input/input6
  797. <4>mdp4_csc_config: Block type 10 isn't supported by CSC.
  798. <4>mdp4_csc_config: Block type 8 isn't supported by CSC.
  799. <3>[DISP] lcdc_tenderloin_panel_set_backlight: 256
  800. <5>type=1400 audit(1463382732.331:13): avc:  denied  { execmem } for  pid=115 comm="recovery" scontext=u:r:init:s0 tcontext=u:r:init:s0 tclass=process
  801. <5>type=1400 audit(1463382732.331:14): avc:  denied  { execute } for  pid=115 comm="recovery" path="/dev/ashmem" dev="tmpfs" ino=4596 scontext=u:r:init:s0 tcontext=u:object_r:ashmem_device:s0 tclass=chr_file
  802. <6>lsm303dlh_acc_sysfs: hw init start
  803. <6>lsm303dlh_acc_sysfs: hw init done
  804. <6>EXT4-fs (dm-8): mounted filesystem with ordered data mode. Opts:
  805. <7>SELinux: initialized (dev dm-8, type ext4), uses xattr
  806. <6>SELinux:  Context u:object_r:recovery_cache_file:s0 is not valid (left unmapped).
  807. <7>EXT4-fs (dm-9): ext4_orphan_cleanup: deleting unreferenced inode 1098193
  808. <6>EXT4-fs (dm-9): 1 orphan inode deleted
  809. <6>EXT4-fs (dm-9): recovery complete
  810. <6>EXT4-fs (dm-9): mounted filesystem with ordered data mode. Opts:
  811. <7>SELinux: initialized (dev dm-9, type ext4), uses xattr
  812. <6>EXT4-fs (dm-9): mounted filesystem with ordered data mode. Opts:
  813. <7>SELinux: initialized (dev dm-9, type ext4), uses xattr
  814. <6>SELinux:  Context u:object_r:bootchart_data_file:s0 is not valid (left unmapped).
  815. <6>SELinux:  Context u:object_r:gatekeeper_data_file:s0 is not valid (left unmapped).
  816. <6>SELinux:  Context u:object_r:perfprofd_data_file:s0 is not valid (left unmapped).
  817. <6>SELinux:  Context u:object_r:vold_data_file:s0 is not valid (left unmapped).
  818. <5>type=1400 audit(1463382732.651:15): avc:  denied  { getattr } for  pid=115 comm="recovery" path="/data/data/org.cyanogenmod.audiofx" dev="dm-9" ino=1097730 scontext=u:r:init:s0 tcontext=u:object_r:app_data_file:s0:c512,c768 tclass=dir
  819. <5>type=1400 audit(1463382732.651:16): avc:  denied  { read } for  pid=115 comm="recovery" name="org.cyanogenmod.audiofx" dev="dm-9" ino=1097730 scontext=u:r:init:s0 tcontext=u:object_r:app_data_file:s0:c512,c768 tclass=dir
  820. <5>type=1400 audit(1463382732.651:17): avc:  denied  { open } for  pid=115 comm="recovery" name="org.cyanogenmod.audiofx" dev="dm-9" ino=1097730 scontext=u:r:init:s0 tcontext=u:object_r:app_data_file:s0:c512,c768 tclass=dir
  821. <5>type=1400 audit(1463382732.651:18): avc:  denied  { getattr } for  pid=115 comm="recovery" path="/data/data/org.cyanogenmod.audiofx/shared_prefs/global.xml" dev="dm-9" ino=1098121 scontext=u:r:init:s0 tcontext=u:object_r:app_data_file:s0:c512,c768 tclass=file
  822. <5>type=1400 audit(1463382732.701:19): avc:  denied  { getattr } for  pid=115 comm="recovery" path="/data/data/com.android.defcontainer/lib" dev="dm-9" ino=1097736 scontext=u:r:init:s0 tcontext=u:object_r:app_data_file:s0 tclass=lnk_file
  823. <6>SELinux:  Context u:object_r:adb_data_file:s0 is not valid (left unmapped).
  824. <6>SELinux:  Context u:object_r:heapdump_data_file:s0 is not valid (left unmapped).
  825. <6>SELinux:  Context u:object_r:theme_data_file:s0 is not valid (left unmapped).
  826. <6>EXT4-fs (dm-10): mounted filesystem with ordered data mode. Opts:
  827. <7>SELinux: initialized (dev dm-10, type ext4), uses xattr
  828. <7>SELinux: initialized (dev dm-6, type vfat), uses genfs_contexts
  829. <3>TSENS: TZ get temp failed!
  830. <7>SELinux: initialized (dev dm-6, type vfat), uses genfs_contexts
  831. <3>[DISP] lcdc_tenderloin_panel_set_backlight: 255
  832. <6>SELinux:  Context u:object_r:recovery_cache_file:s0:c512,c768 is not valid (left unmapped).
  833. <6>EXT4-fs (dm-8): mounted filesystem with ordered data mode. Opts:
  834. <7>SELinux: initialized (dev dm-8, type ext4), uses xattr
  835. <5>type=1400 audit(1463382737.035:20): avc:  denied  { execute } for  pid=157 comm="recovery" name="updater" dev="tmpfs" ino=3218 scontext=u:r:init:s0 tcontext=u:object_r:init_tmpfs:s0 tclass=file
  836. <5>type=1400 audit(1463382737.035:21): avc:  denied  { execute_no_trans } for  pid=157 comm="recovery" path="/tmp/updater" dev="tmpfs" ino=3218 scontext=u:r:init:s0 tcontext=u:object_r:init_tmpfs:s0 tclass=file
  837. <6>EXT4-fs (dm-10): mounted filesystem with ordered data mode. Opts:
  838. <7>SELinux: initialized (dev dm-10, type ext4), uses xattr
  839. <3>[DISP] lcdc_tenderloin_panel_set_backlight: 7
  840. <6>a6_update_connected_ps: ac=0 usb=0 dock=0
  841. <6>max8903b_current_setup: ### CHARGE_DISABLE
  842. <3>[DISP] lcdc_tenderloin_panel_set_backlight: 0
  843. <3>[DISP] lcdc_tenderloin_panel_set_backlight: 255
  844. <3>[DISP] lcdc_tenderloin_panel_set_backlight: 7
  845. <3>[DISP] lcdc_tenderloin_panel_set_backlight: 0
  846. <6>EXT4-fs (dm-10): mounted filesystem with ordered data mode. Opts:
  847. <7>SELinux: initialized (dev dm-10, type ext4), uses xattr
  848. <5>type=1400 audit(1463382975.258:22): avc:  denied  { write } for  pid=979 comm="cp" name="etc" dev="dm-10" ino=438 scontext=u:r:init:s0 tcontext=u:object_r:system_file:s0 tclass=dir
  849. <5>type=1400 audit(1463382975.258:23): avc:  denied  { remove_name } for  pid=979 comm="cp" name="hosts" dev="dm-10" ino=518 scontext=u:r:init:s0 tcontext=u:object_r:system_file:s0 tclass=dir
  850. <5>type=1400 audit(1463382975.258:24): avc:  denied  { unlink } for  pid=979 comm="cp" name="hosts" dev="dm-10" ino=518 scontext=u:r:init:s0 tcontext=u:object_r:system_file:s0 tclass=file
  851. <5>type=1400 audit(1463382975.258:25): avc:  denied  { add_name } for  pid=979 comm="cp" name="hosts" scontext=u:r:init:s0 tcontext=u:object_r:system_file:s0 tclass=dir
  852. <5>type=1400 audit(1463382975.258:26): avc:  denied  { create } for  pid=979 comm="cp" name="hosts" scontext=u:r:init:s0 tcontext=u:object_r:system_file:s0 tclass=file
  853. <5>type=1400 audit(1463382975.258:27): avc:  denied  { write } for  pid=979 comm="cp" name="hosts" dev="dm-10" ino=518 scontext=u:r:init:s0 tcontext=u:object_r:system_file:s0 tclass=file
  854. <5>type=1400 audit(1463382975.258:28): avc:  denied  { setattr } for  pid=979 comm="cp" name="hosts" dev="dm-10" ino=518 scontext=u:r:init:s0 tcontext=u:object_r:system_file:s0 tclass=file
  855. <5>type=1400 audit(1463382975.308:29): avc:  denied  { create } for  pid=991 comm="mkdir" name="GoogleContactsSyncAdapter" scontext=u:r:init:s0 tcontext=u:object_r:system_file:s0 tclass=dir
  856. <5>type=1400 audit(1463382978.271:30): avc:  denied  { rmdir } for  pid=1227 comm="rm" name="Provision" dev="dm-10" ino=104 scontext=u:r:init:s0 tcontext=u:object_r:system_file:s0 tclass=dir
  857. <5>type=1400 audit(1463382978.291:31): avc:  denied  { setattr } for  pid=1228 comm="chmod" name="GoogleContactsSyncAdapter" dev="dm-10" ino=14657 scontext=u:r:init:s0 tcontext=u:object_r:system_file:s0 tclass=dir
  858. <5>type=1400 audit(1463382978.431:32): avc:  denied  { create } for  pid=1251 comm="ln" name="libfacelock_jni.so" scontext=u:r:init:s0 tcontext=u:object_r:system_file:s0 tclass=lnk_file
  859. <6>kjournald starting.  Commit interval 5 seconds
  860. <6>EXT3-fs (mmcblk0p13): using internal journal
  861. <6>EXT3-fs (mmcblk0p13): mounted filesystem with writeback data mode
  862. <7>SELinux: initialized (dev mmcblk0p13, type ext3), uses xattr
  863. <3>[DISP] lcdc_panel_power: ++ 0
  864. <3>MFD is Null<0>Restarting system.
  865. <5>Going down for restart now
  866.  
  867. Broadcasting: Intent { act=com.evervolv.toolbox.action.DUMPLOGCAT_FINISHED (has extras) }
  868. Broadcast completed: result=0
  869.  

Reply to "Logcat: ev_tenderloin-6.0.1-nightly-2016.05.14"

Here you can reply to the paste above

Powered by Stikked