Evervolv Paste

Logcat: ev_tenderloin-testing-2014.01.29

From EVLogcat Uploader, 10 Years ago, written in Plain Text, viewed 635 times.
URL http://paste.evervolv.com/view/fb374101 Embed
Download Paste or View Raw
  1. ------ KERNEL LOG (dmesg) ------
  2. <3>[ 1179.242289] lsm303dlh_mag_sysfs 0-001e: get_magnetometer_data failed
  3. <4>[ 1179.252290] ------------[ cut here ]------------
  4. <4>[ 1179.252419] WARNING: at /home/flintman/source/ever/jelly-bt/external/backports-wireless/drivers/net/wireless/ath/ath6kl/txrx.c:379 ath6kl_data_tx+0x58/0x798 [ath6kl]()
  5. <4>[ 1179.252444] Modules linked in: ath6kl cfg80211 compat tun ntfs cifs nls_utf8 [last unloaded: ath6kl]
  6. <4>[ 1179.252559] [<80049680>] (unwind_backtrace+0x0/0x164) from [<800b49fc>] (warn_slowpath_common+0x4c/0x64)
  7. <4>[ 1179.252597] [<800b49fc>] (warn_slowpath_common+0x4c/0x64) from [<800b4a2c>] (warn_slowpath_null+0x18/0x1c)
  8. <4>[ 1179.252687] [<800b4a2c>] (warn_slowpath_null+0x18/0x1c) from [<7f15c5f0>] (ath6kl_data_tx+0x58/0x798 [ath6kl])
  9. <4>[ 1179.252789] [<7f15c5f0>] (ath6kl_data_tx+0x58/0x798 [ath6kl]) from [<8040f23c>] (dev_hard_start_xmit+0x2a0/0x3ec)
  10. <4>[ 1179.252831] [<8040f23c>] (dev_hard_start_xmit+0x2a0/0x3ec) from [<80420b7c>] (sch_direct_xmit+0x70/0x1f0)
  11. <4>[ 1179.252869] [<80420b7c>] (sch_direct_xmit+0x70/0x1f0) from [<8040f64c>] (dev_queue_xmit+0x2c4/0x4dc)
  12. <4>[ 1179.252906] [<8040f64c>] (dev_queue_xmit+0x2c4/0x4dc) from [<80416628>] (neigh_resolve_output+0x25c/0x2c0)
  13. <4>[ 1179.252944] [<80416628>] (neigh_resolve_output+0x25c/0x2c0) from [<804bb564>] (ip6_finish_output2+0x3c0/0x458)
  14. <4>[ 1179.252981] [<804bb564>] (ip6_finish_output2+0x3c0/0x458) from [<804bd5fc>] (ip6_finish_output+0xfb4/0xfe4)
  15. <4>[ 1179.253020] [<804bd5fc>] (ip6_finish_output+0xfb4/0xfe4) from [<804d8500>] (mld_sendpack+0x274/0x4c8)
  16. <4>[ 1179.253057] [<804d8500>] (mld_sendpack+0x274/0x4c8) from [<804d8d58>] (mld_ifc_timer_expire+0x224/0x270)
  17. <4>[ 1179.253098] [<804d8d58>] (mld_ifc_timer_expire+0x224/0x270) from [<800bf8cc>] (run_timer_softirq+0x180/0x22c)
  18. <4>[ 1179.253141] [<800bf8cc>] (run_timer_softirq+0x180/0x22c) from [<800ba0fc>] (__do_softirq+0xa0/0x13c)
  19. <4>[ 1179.253180] [<800ba0fc>] (__do_softirq+0xa0/0x13c) from [<800ba5c8>] (irq_exit+0x48/0xa4)
  20. <4>[ 1179.253225] [<800ba5c8>] (irq_exit+0x48/0xa4) from [<8004208c>] (asm_do_IRQ+0x8c/0xc8)
  21. <4>[ 1179.253259] [<8004208c>] (asm_do_IRQ+0x8c/0xc8) from [<80042b8c>] (__irq_svc+0x4c/0xe4)
  22. <4>[ 1179.253282] Exception stack(0x8071ff30 to 0x8071ff78)
  23. <4>[ 1179.253304] ff20:                                     00000000 00000000 00000001 00000000
  24. <4>[ 1179.253334] ff40: 0000268e 8be04a30 00000000 00000000 8be060d0 8be04a44 0bdc5000 00000000
  25. <4>[ 1179.253362] ff60: 00000000 8071ff78 800cf910 8009194c 60000013 ffffffff
  26. <4>[ 1179.253396] [<80042b8c>] (__irq_svc+0x4c/0xe4) from [<8009194c>] (msm_cpuidle_enter+0x108/0x128)
  27. <4>[ 1179.253434] [<8009194c>] (msm_cpuidle_enter+0x108/0x128) from [<803b15c0>] (cpuidle_idle_call+0xc4/0x124)
  28. <4>[ 1179.253470] [<803b15c0>] (cpuidle_idle_call+0xc4/0x124) from [<800445f0>] (cpu_idle+0x84/0xe8)
  29. <4>[ 1179.253505] [<800445f0>] (cpu_idle+0x84/0xe8) from [<80008ba8>] (start_kernel+0x2b4/0x320)
  30. <4>[ 1179.253537] [<80008ba8>] (start_kernel+0x2b4/0x320) from [<40208084>] (0x40208084)
  31. <4>[ 1179.253558] ---[ end trace e5b90259ac0b4710 ]---
  32. <4>[ 1179.262889] CPU1 is up
  33. <6>[ 1179.263330] PM: early resume of devices complete after 0.413 msecs
  34. <6>[ 1179.329262] wakeup wake lock: mmc_delayed_work
  35. <4>[ 1179.329799] mmc1: queuing unknown CIS tuple 0x01 (3 bytes)
  36. <4>[ 1179.330571] mmc1: queuing unknown CIS tuple 0x1a (5 bytes)
  37. <4>[ 1179.330916] mmc1: queuing unknown CIS tuple 0x1b (8 bytes)
  38. <4>[ 1179.331000] mmc1: queuing unknown CIS tuple 0x14 (0 bytes)
  39. <4>[ 1179.331366] max8903b_resume: resume
  40. <3>[ 1179.374465] pm_op(): platform_pm_resume+0x0/0x4c returns -22
  41. <3>[ 1179.374488] PM: Device kgsl-2d1.1 failed to resume: error -22
  42. <3>[ 1179.378785] msm_wm8958_setup_power: codec power setup
  43. <3>[ 1179.378836] wm8994_ldo_power: Power up the WM8994 LDOs
  44. <7>[ 1179.428561] lm8502_mod_brightness: set LED1 brightness (0) percent
  45. <7>[ 1179.429287] lm8502_mod_brightness: set LED2 brightness (0) percent
  46. <6>[ 1179.435053] PM: resume of devices complete after 171.402 msecs
  47. <7>[ 1179.657827] lm8502_mod_brightness: set LED1 brightness (0) percent
  48. <7>[ 1179.676683] lm8502_mod_brightness: set LED2 brightness (0) percent
  49. <4>[ 1179.869990] Restarting tasks ... done.
  50. <6>[ 1179.884636] suspend: exit suspend, ret = 0 (2014-07-12 15:22:29.950667852 UTC)
  51. <3>[ 1180.012877] wm8994-codec wm8994-codec: - MEOW wm8994_resume
  52. <3>[ 1182.912811] qtaguid: iface_stat: stat_update() lo not found
  53. <3>[ 1182.912934] qtaguid: iface_stat: stat_update() lo not found
  54. <3>[ 1182.923026] qtaguid: iface_stat: stat_update() lo not found
  55. <7>[ 1185.692279] wlan0: no IPv6 routers present
  56. <6>[ 1256.753580] cfg80211: Calling CRDA for country: US
  57. <3>[ 1256.896858] qtaguid: iface_stat: stat_update() lo not found
  58. <3>[ 1256.897095] qtaguid: iface_stat: stat_update() lo not found
  59. <3>[ 1256.910361] qtaguid: iface_stat: stat_update() lo not found
  60. <3>[ 1256.911799] qtaguid: iface_stat: stat_update() lo not found
  61. <6>[ 1258.303139] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
  62. <3>[ 1259.779893] qtaguid: iface_stat: stat_update() lo not found
  63. <3>[ 1259.780124] qtaguid: iface_stat: stat_update() lo not found
  64. <3>[ 1259.801520] qtaguid: iface_stat: stat_update() lo not found
  65. <3>[ 1259.801722] qtaguid: iface_stat: stat_update() lo not found
  66. <3>[ 1265.086029] qtaguid: iface_stat: stat_update() lo not found
  67. <3>[ 1265.086150] qtaguid: iface_stat: stat_update() lo not found
  68. <3>[ 1265.096245] qtaguid: iface_stat: stat_update() lo not found
  69. <6>[ 1265.342288] gpio-keys: volume up button pressed
  70. <6>[ 1265.596127] gpio-keys: volume up button released
  71. <6>[ 1266.816100] gpio-keys: volume up button pressed
  72. <6>[ 1266.952292] gpio-keys: volume up button released
  73. <3>[ 1270.083749] qtaguid: iface_stat: stat_update() lo not found
  74. <3>[ 1270.083793] qtaguid: iface_stat: stat_update() lo not found
  75. <3>[ 1270.093872] qtaguid: iface_stat: stat_update() lo not found
  76. <7>[ 1270.522292] wlan0: no IPv6 routers present
  77. <3>[ 1273.282754] qtaguid: iface_stat: stat_update() lo not found
  78. <3>[ 1273.282870] qtaguid: iface_stat: stat_update() lo not found
  79. <3>[ 1273.292967] qtaguid: iface_stat: stat_update() lo not found
  80. <6>[ 1276.943486] cfg80211: Calling CRDA to update world regulatory domain
  81. <3>[ 1277.078707] qtaguid: iface_stat: stat_update() lo not found
  82. <3>[ 1277.078940] qtaguid: iface_stat: stat_update() lo not found
  83. <3>[ 1277.093531] qtaguid: iface_stat: stat_update() lo not found
  84. <3>[ 1277.093753] qtaguid: iface_stat: stat_update() lo not found
  85. <6>[ 1303.059537] lsm303dlh_acc_sysfs: hw init start
  86. <6>[ 1303.064870] request_suspend_state: wakeup (3->0) at 1303052634832 (2014-07-12 15:24:33.130861754 UTC)
  87. <6>[ 1303.069777] lsm303dlh_acc_sysfs: hw init done
  88. <3>[ 1303.098188] lcdc_lg_panel_power: l10 ENABLE
  89. <3>[ 1303.682955] board_sdio_wifi_disable
  90. <6>[ 1303.692517] tenderloin_wifi_power: New regulator mode for 8058_s3: 1
  91. <6>[ 1303.813358] mmc1: card 0001 removed
  92. <6>[ 1304.403937] CMTP-ATH6KL v2013-07-23-test
  93. <3>[ 1304.403961] board_sdio_wifi_enable
  94. <6>[ 1304.412678] wifi_power(1) 1.8V sdio: set load
  95. <6>[ 1304.414213] tenderloin_wifi_power: New regulator mode for 8058_s3: 1
  96. <6>[ 1304.422877] wifi_power(1) 3.3V
  97. <6>[ 1304.425623] wifi_power(1) 8901_l1 3.3V
  98. <6>[ 1304.429351] wifi_power(1) 8058_l19 1.8V
  99. <4>[ 1304.433300] wifi_power(1) CHIP_PWD
  100. <4>[ 1304.787064] mmc1: queuing unknown CIS tuple 0x01 (3 bytes)
  101. <4>[ 1304.794591] mmc1: queuing unknown CIS tuple 0x1a (5 bytes)
  102. <4>[ 1304.797635] mmc1: queuing unknown CIS tuple 0x1b (8 bytes)
  103. <4>[ 1304.798258] mmc1: queuing unknown CIS tuple 0x14 (0 bytes)
  104. <4>[ 1304.800742] mmc1: queuing unknown CIS tuple 0x80 (1 bytes)
  105. <4>[ 1304.800822] mmc1: queuing unknown CIS tuple 0x81 (1 bytes)
  106. <4>[ 1304.800897] mmc1: queuing unknown CIS tuple 0x82 (1 bytes)
  107. <6>[ 1304.800935] mmc1: new high speed SDIO card at address 0001
  108. <3>[ 1304.847521] ath6kl: temporary war to avoid sdio crc error
  109. <6>[ 1305.297109] ath6kl: ar6003 hw 2.1.1 sdio fw 3.2.0.144 api 3
  110. <6>[ 1305.297154] ath6kl: firmware supports: sched-scan,sta-p2pdev-duplex,rsn-cap-override
  111. <6>[ 1310.346205] ADDRCONF(NETDEV_UP): wlan0: link is not ready
  112. <6>[ 1310.863725] smd_alloc_channel() 'DAL_AQ_VID' cid=40
  113. <6>[ 1310.864501] smd_alloc_channel() 'DAL_AQ_AUD' cid=41
  114. <6>[ 1310.873315] smd_alloc_channel() 'DAL00' cid=43
  115. <6>[ 1310.877834] smd_alloc_channel() 'DIAG' cid=44
  116. <6>[ 1310.881569] smd_alloc_channel() 'DIAG_CNTL' cid=45
  117. <6>[ 1310.886821] smd_alloc_channel() 'apr_audio_svc' cid=47
  118. <6>[ 1310.891755] apr_tal:Q6 Is Up
  119. <6>[ 1310.894273] SMD: ch 47 0 -> 1
  120. <6>[ 1310.897077] SMD: ch 47 1 -> 2
  121. <6>[ 1310.899688] apr_tal: SMD_EVENT_OPEN
  122. <6>[ 1311.148108] msm_device_put:device speaker_stereo_rx set 0
  123. <6>[ 1311.148214] msm_device_put:device speaker_stereo_rx set 1
  124. <3>[ 1311.148239] msm_device_put:device freq =48000
  125. <6>[ 1311.149626] afe_open: Register AFE
  126. <6>[ 1314.443467] msm_device_put:device speaker_stereo_rx set 0
  127. <6>[ 1364.514288] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
  128. <7>[ 1374.872287] wlan0: no IPv6 routers present
  129. <6>[ 1380.730338] cfg80211: Calling CRDA for country: US
  130. <6>[ 1524.554369] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
  131. <3>[ 1524.951543] qtaguid: iface_stat: stat_update() lo not found
  132. <3>[ 1524.951937] qtaguid: iface_stat: stat_update() lo not found
  133. <3>[ 1524.980168] qtaguid: iface_stat: stat_update() lo not found
  134. <3>[ 1524.980371] qtaguid: iface_stat: stat_update() lo not found
  135. <7>[ 1536.032290] wlan0: no IPv6 routers present
  136. <6>[ 1550.822913] cfg80211: Calling CRDA to update world regulatory domain
  137. <3>[ 1551.011969] qtaguid: iface_stat: stat_update() lo not found
  138. <3>[ 1551.012327] qtaguid: iface_stat: stat_update() lo not found
  139. <3>[ 1551.012759] qtaguid: iface_stat: stat_update() lo not found
  140. <3>[ 1551.012939] qtaguid: iface_stat: stat_update() lo not found
  141. <3>[ 1751.213506] qtaguid: iface_stat: stat_update() lo not found
  142. <6>[ 1792.471861] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
  143. <3>[ 1793.927887] qtaguid: iface_stat: stat_update() lo not found
  144. <3>[ 1793.928127] qtaguid: iface_stat: stat_update() lo not found
  145. <3>[ 1793.953873] qtaguid: iface_stat: stat_update() lo not found
  146. <3>[ 1793.954078] qtaguid: iface_stat: stat_update() lo not found
  147. <7>[ 1804.395968] wlan0: no IPv6 routers present
  148. <6>[ 1822.983637] cfg80211: Calling CRDA for country: US
  149. <3>[ 1823.041454] qtaguid: iface_stat: stat_update() lo not found
  150. <3>[ 1823.041686] qtaguid: iface_stat: stat_update() lo not found
  151. <3>[ 1823.053152] qtaguid: iface_stat: stat_update() lo not found
  152. <3>[ 1823.053350] qtaguid: iface_stat: stat_update() lo not found
  153. <6>[ 1851.011588] request_suspend_state: sleep (0->3) at 1850999379466 (2014-07-12 15:33:41.077612165 UTC)
  154. <3>[ 1851.042401] lcdc_lg_panel_power: l10 DISABLE
  155. <6>[ 1883.197716] PM: Syncing filesystems ... skipped for target platform ... done.
  156. <4>[ 1883.207052] Freezing user space processes ... (elapsed 0.01 seconds) done.
  157. <4>[ 1883.224050] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  158. <4>[ 1883.243966] Suspending console(s) (use no_console_suspend to debug)
  159. <3>[ 1883.258359] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
  160. <3>[ 1883.258371] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
  161. <3>[ 1883.258381] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
  162. <3>[ 1883.266571] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
  163. <3>[ 1883.266581] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
  164. <3>[ 1883.266590] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
  165. <7>[ 1883.267090] lm8502_mod_brightness: set LED2 brightness (0) percent
  166. <7>[ 1883.267414] lm8502_mod_brightness: set LED1 brightness (0) percent
  167. <7>[ 1883.271963] lm8502_mod_brightness: set LED1 brightness (0) percent
  168. <7>[ 1883.272774] lm8502_mod_brightness: set LED2 brightness (0) percent
  169. <3>[ 1883.276916] msm_wm8958_shutdown_power: codec power shutdown
  170. <3>[ 1883.276931] wm8994_ldo_power: Power down the WM8994 LDOs
  171. <3>[ 1883.276952] wm8994 4-001a: - MEOW wm8994_device_suspend
  172. <4>[ 1883.283407] max8903b_suspend: suspend
  173. <6>[ 1883.285214] PM: suspend of devices complete after 30.862 msecs
  174. <6>[ 1883.286075] PM: late suspend of devices complete after 0.844 msecs
  175. <4>[ 1883.286088] Disabling non-boot CPUs ...
  176. <4>[ 1883.404814] gic_show_resume_irq: 48 triggered
  177. <4>[ 1883.404814] gic_show_resume_irq: 52 triggered
  178. <4>[ 1883.404814] msm_gpio_show_resume_irq: irq 293/gpio 37 triggered wake
  179. <4>[ 1883.404880] Enabling non-boot CPUs ...
  180. <4>[ 1883.502650] CPU1 is up
  181. <6>[ 1883.503008] PM: early resume of devices complete after 0.342 msecs
  182. <3>[ 1883.562267] lsm303dlh_mag_sysfs 0-001e: read transfer error
  183. <3>[ 1883.562278] lsm303dlh_mag_sysfs 0-001e: get_magnetometer_data failed
  184. <6>[ 1883.569241] wakeup wake lock: mmc_delayed_work
  185. <4>[ 1883.569594] mmc1: queuing unknown CIS tuple 0x01 (3 bytes)
  186. <4>[ 1883.570066] mmc1: queuing unknown CIS tuple 0x1a (5 bytes)
  187. <4>[ 1883.570276] mmc1: queuing unknown CIS tuple 0x1b (8 bytes)
  188. <4>[ 1883.570326] mmc1: queuing unknown CIS tuple 0x14 (0 bytes)
  189. <4>[ 1883.570567] max8903b_resume: resume
  190. <3>[ 1883.604315] pm_op(): platform_pm_resume+0x0/0x4c returns -22
  191. <3>[ 1883.604327] PM: Device kgsl-2d1.1 failed to resume: error -22
  192. <3>[ 1883.607910] msm_wm8958_setup_power: codec power setup
  193. <3>[ 1883.607940] wm8994_ldo_power: Power up the WM8994 LDOs
  194. <7>[ 1883.656506] lm8502_mod_brightness: set LED1 brightness (0) percent
  195. <7>[ 1883.657170] lm8502_mod_brightness: set LED2 brightness (0) percent
  196. <6>[ 1883.660430] PM: resume of devices complete after 157.215 msecs
  197. <4>[ 1883.836560] Restarting tasks ...
  198. <7>[ 1883.843110] lm8502_mod_brightness: set LED1 brightness (0) percent
  199. <7>[ 1883.843701] lm8502_mod_brightness: set LED2 brightness (0) percent
  200. <4>[ 1883.847187] done.
  201. <3>[ 1883.982998] wm8994-codec wm8994-codec: - MEOW wm8994_resume
  202. <6>[ 1884.082524] suspend: exit suspend, ret = 0 (2014-07-12 15:34:17.922796000 UTC)
  203. <6>[ 1884.133954] PM: Syncing filesystems ... skipped for target platform ... done.
  204. <4>[ 1884.140203] Freezing user space processes ... (elapsed 0.02 seconds) done.
  205. <4>[ 1884.164209] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  206. <4>[ 1884.184275] Suspending console(s) (use no_console_suspend to debug)
  207. <3>[ 1884.202775] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
  208. <3>[ 1884.202795] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
  209. <3>[ 1884.202812] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
  210. <3>[ 1884.217584] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
  211. <3>[ 1884.217601] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
  212. <3>[ 1884.217617] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
  213. <7>[ 1884.218278] lm8502_mod_brightness: set LED2 brightness (0) percent
  214. <7>[ 1884.218636] lm8502_mod_brightness: set LED1 brightness (0) percent
  215. <7>[ 1884.226978] lm8502_mod_brightness: set LED1 brightness (0) percent
  216. <7>[ 1884.227875] lm8502_mod_brightness: set LED2 brightness (0) percent
  217. <3>[ 1884.232241] msm_wm8958_shutdown_power: codec power shutdown
  218. <3>[ 1884.232267] wm8994_ldo_power: Power down the WM8994 LDOs
  219. <3>[ 1884.232301] wm8994 4-001a: - MEOW wm8994_device_suspend
  220. <4>[ 1884.243059] max8903b_suspend: suspend
  221. <6>[ 1884.245351] PM: suspend of devices complete after 47.664 msecs
  222. <6>[ 1884.246825] PM: late suspend of devices complete after 1.445 msecs
  223. <4>[ 1884.246845] Disabling non-boot CPUs ...
  224. <6>[ 1884.254825] cpufreq: cpu 1 is not active.
  225. <6>[ 1884.264821] cpufreq: cpu 1 is not active.
  226. <6>[ 1884.282354] cpufreq: cpu 1 is not active.
  227. <4>[ 1884.317116] gic_show_resume_irq: 48 triggered
  228. <4>[ 1884.317116] gic_show_resume_irq: 52 triggered
  229. <4>[ 1884.317116] msm_gpio_show_resume_irq: irq 344/gpio 88 triggered wake
  230. <4>[ 1884.317116] pm8058_show_resume_irq:468 triggered
  231. <4>[ 1884.317239] Enabling non-boot CPUs ...
  232. <4>[ 1884.412970] CPU1 is up
  233. <6>[ 1884.413567] PM: early resume of devices complete after 0.568 msecs
  234. <6>[ 1884.413827] wakeup wake lock: alarm_rtc
  235. <4>[ 1884.479851] mmc1: queuing unknown CIS tuple 0x01 (3 bytes)
  236. <4>[ 1884.480640] mmc1: queuing unknown CIS tuple 0x1a (5 bytes)
  237. <4>[ 1884.480992] mmc1: queuing unknown CIS tuple 0x1b (8 bytes)
  238. <4>[ 1884.481077] mmc1: queuing unknown CIS tuple 0x14 (0 bytes)
  239. <4>[ 1884.481450] max8903b_resume: resume
  240. <3>[ 1884.482733] lsm303dlh_mag_sysfs 0-001e: read transfer error
  241. <3>[ 1884.482751] lsm303dlh_mag_sysfs 0-001e: get_magnetometer_data failed
  242. <3>[ 1884.526686] pm_op(): platform_pm_resume+0x0/0x4c returns -22
  243. <3>[ 1884.526708] PM: Device kgsl-2d1.1 failed to resume: error -22
  244. <3>[ 1884.530994] msm_wm8958_setup_power: codec power setup
  245. <3>[ 1884.531040] wm8994_ldo_power: Power up the WM8994 LDOs
  246. <7>[ 1884.580739] lm8502_mod_brightness: set LED1 brightness (0) percent
  247. <7>[ 1884.581468] lm8502_mod_brightness: set LED2 brightness (0) percent
  248. <6>[ 1884.587228] PM: resume of devices complete after 173.191 msecs
  249. <7>[ 1884.723445] lm8502_mod_brightness: set LED1 brightness (0) percent
  250. <7>[ 1884.723829] lm8502_mod_brightness: set LED2 brightness (0) percent
  251. <4>[ 1884.782899] Restarting tasks ... done.
  252. <6>[ 1884.798825] suspend: exit suspend, ret = 0 (2014-07-12 15:34:28.712733186 UTC)
  253. <3>[ 1884.872935] wm8994-codec wm8994-codec: - MEOW wm8994_resume
  254. <6>[ 1885.009755] PM: Syncing filesystems ... skipped for target platform ... done.
  255. <4>[ 1885.018170] Freezing user space processes ... (elapsed 0.02 seconds) done.
  256. <4>[ 1885.044147] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
  257. <4>[ 1885.054101] Suspending console(s) (use no_console_suspend to debug)
  258. <3>[ 1885.077368] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
  259. <3>[ 1885.077396] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
  260. <3>[ 1885.077421] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
  261. <3>[ 1885.102607] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
  262. <3>[ 1885.102634] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
  263. <3>[ 1885.102658] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
  264. <7>[ 1885.103423] lm8502_mod_brightness: set LED2 brightness (0) percent
  265. <7>[ 1885.103803] lm8502_mod_brightness: set LED1 brightness (0) percent
  266. <7>[ 1885.114947] lm8502_mod_brightness: set LED1 brightness (0) percent
  267. <7>[ 1885.115892] lm8502_mod_brightness: set LED2 brightness (0) percent
  268. <3>[ 1885.120344] msm_wm8958_shutdown_power: codec power shutdown
  269. <3>[ 1885.120377] wm8994_ldo_power: Power down the WM8994 LDOs
  270. <3>[ 1885.120421] wm8994 4-001a: - MEOW wm8994_device_suspend
  271. <4>[ 1885.128982] max8903b_suspend: suspend
  272. <6>[ 1885.131510] PM: suspend of devices complete after 62.127 msecs
  273. <6>[ 1885.133171] PM: late suspend of devices complete after 1.617 msecs
  274. <4>[ 1885.133199] Disabling non-boot CPUs ...
  275. <6>[ 1885.134788] cpufreq: cpu 1 is not active.
  276. <6>[ 1885.152283] cpufreq: cpu 1 is not active.
  277. <4>[ 1885.210487] gic_show_resume_irq: 48 triggered
  278. <4>[ 1885.210487] gic_show_resume_irq: 52 triggered
  279. <4>[ 1885.210487] msm_gpio_show_resume_irq: irq 293/gpio 37 triggered wake
  280. <4>[ 1885.210672] Enabling non-boot CPUs ...
  281. <4>[ 1885.303145] CPU1 is up
  282. <6>[ 1885.303647] PM: early resume of devices complete after 0.468 msecs
  283. <6>[ 1885.369613] wakeup wake lock: mmc_delayed_work
  284. <4>[ 1885.370290] mmc1: queuing unknown CIS tuple 0x01 (3 bytes)
  285. <4>[ 1885.371288] mmc1: queuing unknown CIS tuple 0x1a (5 bytes)
  286. <4>[ 1885.371735] mmc1: queuing unknown CIS tuple 0x1b (8 bytes)
  287. <4>[ 1885.371845] mmc1: queuing unknown CIS tuple 0x14 (0 bytes)
  288. <4>[ 1885.372403] max8903b_resume: resume
  289. <3>[ 1885.382329] lsm303dlh_mag_sysfs 0-001e: read transfer error
  290. <3>[ 1885.382355] lsm303dlh_mag_sysfs 0-001e: get_magnetometer_data failed
  291. <3>[ 1885.414693] pm_op(): platform_pm_resume+0x0/0x4c returns -22
  292. <3>[ 1885.414725] PM: Device kgsl-2d1.1 failed to resume: error -22
  293. <3>[ 1885.419454] msm_wm8958_setup_power: codec power setup
  294. <3>[ 1885.419520] wm8994_ldo_power: Power up the WM8994 LDOs
  295. <7>[ 1885.470595] lm8502_mod_brightness: set LED1 brightness (0) percent
  296. <7>[ 1885.471385] lm8502_mod_brightness: set LED2 brightness (0) percent
  297. <6>[ 1885.478950] PM: resume of devices complete after 174.915 msecs
  298. <7>[ 1885.669121] lm8502_mod_brightness: set LED1 brightness (0) percent
  299. <4>[ 1885.669188] Restarting tasks ...
  300. <7>[ 1885.669789] lm8502_mod_brightness: set LED2 brightness (0) percent
  301. <4>[ 1885.688726] done.
  302. <3>[ 1885.822942] wm8994-codec wm8994-codec: - MEOW wm8994_resume
  303. <6>[ 1885.923486] suspend: exit suspend, ret = 0 (2014-07-12 15:34:44.945923407 UTC)
  304. <6>[ 1885.960884] PM: Syncing filesystems ... skipped for target platform ... done.
  305. <4>[ 1885.971328] Freezing user space processes ... (elapsed 0.01 seconds) done.
  306. <4>[ 1885.986560] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  307. <4>[ 1886.006504] Suspending console(s) (use no_console_suspend to debug)
  308. <3>[ 1886.020973] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
  309. <3>[ 1886.020985] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
  310. <3>[ 1886.020996] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
  311. <3>[ 1886.029838] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
  312. <3>[ 1886.029848] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
  313. <3>[ 1886.029858] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
  314. <7>[ 1886.030365] lm8502_mod_brightness: set LED2 brightness (0) percent
  315. <7>[ 1886.030692] lm8502_mod_brightness: set LED1 brightness (0) percent
  316. <7>[ 1886.035582] lm8502_mod_brightness: set LED1 brightness (0) percent
  317. <7>[ 1886.036395] lm8502_mod_brightness: set LED2 brightness (0) percent
  318. <3>[ 1886.040543] msm_wm8958_shutdown_power: codec power shutdown
  319. <3>[ 1886.040559] wm8994_ldo_power: Power down the WM8994 LDOs
  320. <3>[ 1886.040581] wm8994 4-001a: - MEOW wm8994_device_suspend
  321. <4>[ 1886.046840] max8903b_suspend: suspend
  322. <6>[ 1886.048687] PM: suspend of devices complete after 31.823 msecs
  323. <6>[ 1886.049575] PM: late suspend of devices complete after 0.871 msecs
  324. <4>[ 1886.049587] Disabling non-boot CPUs ...
  325. <6>[ 1886.054794] cpufreq: cpu 1 is not active.
  326. <6>[ 1886.072274] cpufreq: cpu 1 is not active.
  327. <6>[ 1886.092269] cpufreq: cpu 1 is not active.
  328. <6>[ 1886.112282] cpufreq: cpu 1 is not active.
  329. <4>[ 1886.127323] gic_show_resume_irq: 48 triggered
  330. <4>[ 1886.127323] gic_show_resume_irq: 52 triggered
  331. <4>[ 1886.127323] msm_gpio_show_resume_irq: irq 293/gpio 37 triggered wake
  332. <4>[ 1886.127406] Enabling non-boot CPUs ...
  333. <4>[ 1886.222619] CPU1 is up
  334. <6>[ 1886.222981] PM: early resume of devices complete after 0.345 msecs
  335. <6>[ 1886.289127] wakeup wake lock: mmc_delayed_work
  336. <4>[ 1886.289497] mmc1: queuing unknown CIS tuple 0x01 (3 bytes)
  337. <4>[ 1886.289993] mmc1: queuing unknown CIS tuple 0x1a (5 bytes)
  338. <4>[ 1886.290214] mmc1: queuing unknown CIS tuple 0x1b (8 bytes)
  339. <4>[ 1886.290267] mmc1: queuing unknown CIS tuple 0x14 (0 bytes)
  340. <4>[ 1886.290517] max8903b_resume: resume
  341. <3>[ 1886.292278] lsm303dlh_mag_sysfs 0-001e: read transfer error
  342. <3>[ 1886.292288] lsm303dlh_mag_sysfs 0-001e: get_magnetometer_data failed
  343. <3>[ 1886.324115] pm_op(): platform_pm_resume+0x0/0x4c returns -22
  344. <3>[ 1886.324128] PM: Device kgsl-2d1.1 failed to resume: error -22
  345. <3>[ 1886.327769] msm_wm8958_setup_power: codec power setup
  346. <3>[ 1886.327801] wm8994_ldo_power: Power up the WM8994 LDOs
  347. <7>[ 1886.376465] lm8502_mod_brightness: set LED1 brightness (0) percent
  348. <7>[ 1886.377136] lm8502_mod_brightness: set LED2 brightness (0) percent
  349. <6>[ 1886.380633] PM: resume of devices complete after 157.416 msecs
  350. <7>[ 1886.538766] lm8502_mod_brightness: set LED1 brightness (0) percent
  351. <7>[ 1886.539118] lm8502_mod_brightness: set LED2 brightness (0) percent
  352. <4>[ 1886.572989] Restarting tasks ... done.
  353. <6>[ 1886.584062] suspend: exit suspend, ret = 0 (2014-07-12 15:35:00.704188148 UTC)
  354. <3>[ 1886.612479] binder: release proc 1052, transaction 75863, not freed
  355. <3>[ 1886.682838] wm8994-codec wm8994-codec: - MEOW wm8994_resume
  356. <6>[ 1886.839007] PM: Syncing filesystems ... skipped for target platform ... done.
  357. <4>[ 1886.847431] Freezing user space processes ... (elapsed 0.01 seconds) done.
  358. <4>[ 1886.866540] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  359. <4>[ 1886.886499] Suspending console(s) (use no_console_suspend to debug)
  360. <3>[ 1886.900260] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
  361. <3>[ 1886.900290] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
  362. <3>[ 1886.900315] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
  363. <3>[ 1886.925555] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
  364. <3>[ 1886.925582] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
  365. <3>[ 1886.925606] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
  366. <7>[ 1886.926372] lm8502_mod_brightness: set LED2 brightness (0) percent
  367. <7>[ 1886.926751] lm8502_mod_brightness: set LED1 brightness (0) percent
  368. <7>[ 1886.937908] lm8502_mod_brightness: set LED1 brightness (0) percent
  369. <7>[ 1886.938849] lm8502_mod_brightness: set LED2 brightness (0) percent
  370. <3>[ 1886.943294] msm_wm8958_shutdown_power: codec power shutdown
  371. <3>[ 1886.943328] wm8994_ldo_power: Power down the WM8994 LDOs
  372. <3>[ 1886.943370] wm8994 4-001a: - MEOW wm8994_device_suspend
  373. <4>[ 1886.951836] max8903b_suspend: suspend
  374. <6>[ 1886.954467] PM: suspend of devices complete after 57.554 msecs
  375. <6>[ 1886.956013] PM: late suspend of devices complete after 1.509 msecs
  376. <4>[ 1886.956040] Disabling non-boot CPUs ...
  377. <6>[ 1886.964776] cpufreq: cpu 1 is not active.
  378. <6>[ 1886.974784] cpufreq: cpu 1 is not active.
  379. <4>[ 1887.030369] gic_show_resume_irq: 48 triggered
  380. <4>[ 1887.030369] gic_show_resume_irq: 52 triggered
  381. <4>[ 1887.030369] msm_gpio_show_resume_irq: irq 293/gpio 37 triggered wake
  382. <4>[ 1887.030556] Enabling non-boot CPUs ...
  383. <4>[ 1887.123174] CPU1 is up
  384. <6>[ 1887.123675] PM: early resume of devices complete after 0.467 msecs
  385. <6>[ 1887.189644] wakeup wake lock: mmc_delayed_work
  386. <4>[ 1887.190323] mmc1: queuing unknown CIS tuple 0x01 (3 bytes)
  387. <4>[ 1887.191323] mmc1: queuing unknown CIS tuple 0x1a (5 bytes)
  388. <4>[ 1887.191770] mmc1: queuing unknown CIS tuple 0x1b (8 bytes)
  389. <4>[ 1887.191881] mmc1: queuing unknown CIS tuple 0x14 (0 bytes)
  390. <4>[ 1887.192431] max8903b_resume: resume
  391. <3>[ 1887.202345] lsm303dlh_mag_sysfs 0-001e: read transfer error
  392. <3>[ 1887.202371] lsm303dlh_mag_sysfs 0-001e: get_magnetometer_data failed
  393. <3>[ 1887.234688] pm_op(): platform_pm_resume+0x0/0x4c returns -22
  394. <3>[ 1887.234719] PM: Device kgsl-2d1.1 failed to resume: error -22
  395. <3>[ 1887.239448] msm_wm8958_setup_power: codec power setup
  396. <3>[ 1887.239509] wm8994_ldo_power: Power up the WM8994 LDOs
  397. <7>[ 1887.290596] lm8502_mod_brightness: set LED1 brightness (0) percent
  398. <7>[ 1887.291386] lm8502_mod_brightness: set LED2 brightness (0) percent
  399. <6>[ 1887.298994] PM: resume of devices complete after 174.932 msecs
  400. <7>[ 1887.489190] lm8502_mod_brightness: set LED1 brightness (0) percent
  401. <4>[ 1887.489256] Restarting tasks ...
  402. <7>[ 1887.489836] lm8502_mod_brightness: set LED2 brightness (0) percent
  403. <4>[ 1887.511613] done.
  404. <3>[ 1887.642926] wm8994-codec wm8994-codec: - MEOW wm8994_resume
  405. <6>[ 1887.746177] suspend: exit suspend, ret = 0 (2014-07-12 15:35:15.948588000 UTC)
  406. <6>[ 1887.788022] PM: Syncing filesystems ... skipped for target platform ... done.
  407. <4>[ 1887.794192] Freezing user space processes ... (elapsed 0.02 seconds) done.
  408. <4>[ 1887.816541] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  409. <4>[ 1887.836473] Suspending console(s) (use no_console_suspend to debug)
  410. <3>[ 1887.854179] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
  411. <3>[ 1887.854191] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
  412. <3>[ 1887.854201] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
  413. <3>[ 1887.862282] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
  414. <3>[ 1887.862292] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
  415. <3>[ 1887.862301] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
  416. <7>[ 1887.862828] lm8502_mod_brightness: set LED2 brightness (0) percent
  417. <7>[ 1887.863178] lm8502_mod_brightness: set LED1 brightness (0) percent
  418. <7>[ 1887.867712] lm8502_mod_brightness: set LED1 brightness (0) percent
  419. <7>[ 1887.868631] lm8502_mod_brightness: set LED2 brightness (0) percent
  420. <3>[ 1887.873099] msm_wm8958_shutdown_power: codec power shutdown
  421. <3>[ 1887.873135] wm8994_ldo_power: Power down the WM8994 LDOs
  422. <3>[ 1887.873177] wm8994 4-001a: - MEOW wm8994_device_suspend
  423. <4>[ 1887.881638] max8903b_suspend: suspend
  424. <6>[ 1887.884295] PM: suspend of devices complete after 37.412 msecs
  425. <6>[ 1887.885841] PM: late suspend of devices complete after 1.510 msecs
  426. <4>[ 1887.885867] Disabling non-boot CPUs ...
  427. <6>[ 1887.894777] cpufreq: cpu 1 is not active.
  428. <6>[ 1887.904773] cpufreq: cpu 1 is not active.
  429. <4>[ 1887.960246] gic_show_resume_irq: 48 triggered
  430. <4>[ 1887.960246] gic_show_resume_irq: 52 triggered
  431. <4>[ 1887.960246] msm_gpio_show_resume_irq: irq 293/gpio 37 triggered wake
  432. <4>[ 1887.960431] Enabling non-boot CPUs ...
  433. <4>[ 1888.053181] CPU1 is up
  434. <6>[ 1888.053684] PM: early resume of devices complete after 0.469 msecs
  435. <3>[ 1888.112366] lsm303dlh_mag_sysfs 0-001e: read transfer error
  436. <3>[ 1888.112394] lsm303dlh_mag_sysfs 0-001e: get_magnetometer_data failed
  437. <6>[ 1888.119686] wakeup wake lock: mmc_delayed_work
  438. <4>[ 1888.120361] mmc1: queuing unknown CIS tuple 0x01 (3 bytes)
  439. <4>[ 1888.121361] mmc1: queuing unknown CIS tuple 0x1a (5 bytes)
  440. <4>[ 1888.121808] mmc1: queuing unknown CIS tuple 0x1b (8 bytes)
  441. <4>[ 1888.121919] mmc1: queuing unknown CIS tuple 0x14 (0 bytes)
  442. <4>[ 1888.122395] max8903b_resume: resume
  443. <3>[ 1888.164705] pm_op(): platform_pm_resume+0x0/0x4c returns -22
  444. <3>[ 1888.164737] PM: Device kgsl-2d1.1 failed to resume: error -22
  445. <3>[ 1888.169467] msm_wm8958_setup_power: codec power setup
  446. <3>[ 1888.169532] wm8994_ldo_power: Power up the WM8994 LDOs
  447. <7>[ 1888.220622] lm8502_mod_brightness: set LED1 brightness (0) percent
  448. <7>[ 1888.221411] lm8502_mod_brightness: set LED2 brightness (0) percent
  449. <6>[ 1888.228983] PM: resume of devices complete after 174.913 msecs
  450. <7>[ 1888.418671] lm8502_mod_brightness: set LED1 brightness (0) percent
  451. <4>[ 1888.418738] Restarting tasks ...
  452. <7>[ 1888.419305] lm8502_mod_brightness: set LED2 brightness (0) percent
  453. <4>[ 1888.436570] done.
  454. <6>[ 1888.436738] suspend: exit suspend, ret = 0 (2014-07-12 15:35:31.709149482 UTC)
  455. <3>[ 1888.572962] wm8994-codec wm8994-codec: - MEOW wm8994_resume
  456. <6>[ 1888.720761] PM: Syncing filesystems ... skipped for target platform ... done.
  457. <4>[ 1888.726972] Freezing user space processes ... (elapsed 0.01 seconds) done.
  458. <4>[ 1888.746554] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  459. <4>[ 1888.766478] Suspending console(s) (use no_console_suspend to debug)
  460. <3>[ 1888.784095] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
  461. <3>[ 1888.784107] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
  462. <3>[ 1888.784116] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
  463. <3>[ 1888.792202] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
  464. <3>[ 1888.792212] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
  465. <3>[ 1888.792221] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
  466. <7>[ 1888.792747] lm8502_mod_brightness: set LED2 brightness (0) percent
  467. <7>[ 1888.793098] lm8502_mod_brightness: set LED1 brightness (0) percent
  468. <7>[ 1888.797608] lm8502_mod_brightness: set LED1 brightness (0) percent
  469. <7>[ 1888.798497] lm8502_mod_brightness: set LED2 brightness (0) percent
  470. <3>[ 1888.802920] msm_wm8958_shutdown_power: codec power shutdown
  471. <3>[ 1888.802955] wm8994_ldo_power: Power down the WM8994 LDOs
  472. <3>[ 1888.802998] wm8994 4-001a: - MEOW wm8994_device_suspend
  473. <4>[ 1888.811454] max8903b_suspend: suspend
  474. <6>[ 1888.814005] PM: suspend of devices complete after 37.130 msecs
  475. <6>[ 1888.815546] PM: late suspend of devices complete after 1.504 msecs
  476. <4>[ 1888.815572] Disabling non-boot CPUs ...
  477. <6>[ 1888.822311] cpufreq: cpu 1 is not active.
  478. <4>[ 1888.941544] gic_show_resume_irq: 48 triggered
  479. <4>[ 1888.941544] gic_show_resume_irq: 52 triggered
  480. <4>[ 1888.941544] msm_gpio_show_resume_irq: irq 344/gpio 88 triggered wake
  481. <4>[ 1888.941544] pm8058_show_resume_irq:468 triggered
  482. <4>[ 1888.941732] Enabling non-boot CPUs ...
  483. <3>[ 1889.022338] lsm303dlh_mag_sysfs 0-001e: read transfer error
  484. <3>[ 1889.022367] lsm303dlh_mag_sysfs 0-001e: get_magnetometer_data failed
  485. <4>[ 1889.053093] CPU1 is up
  486. <6>[ 1889.053597] PM: early resume of devices complete after 0.470 msecs
  487. <6>[ 1889.053846] wakeup wake lock: alarm_rtc
  488. <4>[ 1889.120277] mmc1: queuing unknown CIS tuple 0x01 (3 bytes)
  489. <4>[ 1889.121278] mmc1: queuing unknown CIS tuple 0x1a (5 bytes)
  490. <4>[ 1889.121725] mmc1: queuing unknown CIS tuple 0x1b (8 bytes)
  491. <4>[ 1889.121837] mmc1: queuing unknown CIS tuple 0x14 (0 bytes)
  492. <4>[ 1889.122215] max8903b_resume: resume
  493. <3>[ 1889.164715] pm_op(): platform_pm_resume+0x0/0x4c returns -22
  494. <3>[ 1889.164748] PM: Device kgsl-2d1.1 failed to resume: error -22
  495. <3>[ 1889.169487] msm_wm8958_setup_power: codec power setup
  496. <3>[ 1889.169552] wm8994_ldo_power: Power up the WM8994 LDOs
  497. <7>[ 1889.220240] lm8502_mod_brightness: set LED1 brightness (0) percent
  498. <7>[ 1889.221019] lm8502_mod_brightness: set LED2 brightness (0) percent
  499. <6>[ 1889.228747] PM: resume of devices complete after 174.650 msecs
  500. <7>[ 1889.328353] lm8502_mod_brightness: set LED1 brightness (0) percent
  501. <7>[ 1889.328768] lm8502_mod_brightness: set LED2 brightness (0) percent
  502. <4>[ 1889.418169] Restarting tasks ... done.
  503. <6>[ 1889.430739] suspend: exit suspend, ret = 0 (2014-07-12 15:35:36.703410667 UTC)
  504. <3>[ 1889.466360] wm8994-codec wm8994-codec: - MEOW wm8994_resume
  505. <6>[ 1890.066250] PM: Syncing filesystems ... skipped for target platform ... done.
  506. <4>[ 1890.074761] Freezing user space processes ... (elapsed 0.01 seconds) done.
  507. <4>[ 1890.094058] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  508. <4>[ 1890.113956] Suspending console(s) (use no_console_suspend to debug)
  509. <3>[ 1890.134578] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
  510. <3>[ 1890.134590] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
  511. <3>[ 1890.134600] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
  512. <3>[ 1890.142695] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
  513. <3>[ 1890.142705] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
  514. <3>[ 1890.142714] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
  515. <7>[ 1890.143213] lm8502_mod_brightness: set LED2 brightness (0) percent
  516. <7>[ 1890.143534] lm8502_mod_brightness: set LED1 brightness (0) percent
  517. <7>[ 1890.149331] lm8502_mod_brightness: set LED1 brightness (0) percent
  518. <7>[ 1890.152137] lm8502_mod_brightness: set LED2 brightness (0) percent
  519. <3>[ 1890.157182] msm_wm8958_shutdown_power: codec power shutdown
  520. <3>[ 1890.157201] wm8994_ldo_power: Power down the WM8994 LDOs
  521. <3>[ 1890.157223] wm8994 4-001a: - MEOW wm8994_device_suspend
  522. <4>[ 1890.163408] max8903b_suspend: suspend
  523. <6>[ 1890.165184] PM: suspend of devices complete after 40.839 msecs
  524. <6>[ 1890.166041] PM: late suspend of devices complete after 0.840 msecs
  525. <4>[ 1890.166053] Disabling non-boot CPUs ...
  526. <4>[ 1890.166108] gic_show_resume_irq: 48 triggered
  527. <4>[ 1890.166108] gic_show_resume_irq: 52 triggered
  528. <4>[ 1890.166108] msm_gpio_show_resume_irq: irq 293/gpio 37 triggered wake
  529. <6>[ 1890.166518] PM: early resume of devices complete after 0.335 msecs
  530. <6>[ 1890.233109] wakeup wake lock: mmc_delayed_work
  531. <4>[ 1890.233479] mmc1: queuing unknown CIS tuple 0x01 (3 bytes)
  532. <4>[ 1890.233954] mmc1: queuing unknown CIS tuple 0x1a (5 bytes)
  533. <4>[ 1890.234164] mmc1: queuing unknown CIS tuple 0x1b (8 bytes)
  534. <4>[ 1890.234215] mmc1: queuing unknown CIS tuple 0x14 (0 bytes)
  535. <4>[ 1890.234457] max8903b_resume: resume
  536. <3>[ 1890.274104] pm_op(): platform_pm_resume+0x0/0x4c returns -22
  537. <3>[ 1890.274117] PM: Device kgsl-2d1.1 failed to resume: error -22
  538. <3>[ 1890.277610] msm_wm8958_setup_power: codec power setup
  539. <3>[ 1890.277642] wm8994_ldo_power: Power up the WM8994 LDOs
  540. <7>[ 1890.338267] lm8502_mod_brightness: set LED1 brightness (0) percent
  541. <7>[ 1890.338926] lm8502_mod_brightness: set LED2 brightness (0) percent
  542. <6>[ 1890.342160] PM: resume of devices complete after 175.435 msecs
  543. <4>[ 1890.500011] Restarting tasks ...
  544. <7>[ 1890.506854] lm8502_mod_brightness: set LED1 brightness (0) percent
  545. <7>[ 1890.507194] lm8502_mod_brightness: set LED2 brightness (0) percent
  546. <4>[ 1890.509522] done.
  547. <3>[ 1890.662967] wm8994-codec wm8994-codec: - MEOW wm8994_resume
  548. <6>[ 1890.762291] suspend: exit suspend, ret = 0 (2014-07-12 15:35:51.920783852 UTC)
  549. <6>[ 1890.796207] PM: Syncing filesystems ... skipped for target platform ... done.
  550. <4>[ 1890.802528] Freezing user space processes ... (elapsed 0.02 seconds) done.
  551. <4>[ 1890.834125] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  552. <4>[ 1890.854196] Suspending console(s) (use no_console_suspend to debug)
  553. <3>[ 1890.872510] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
  554. <3>[ 1890.872529] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
  555. <3>[ 1890.872546] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
  556. <3>[ 1890.887290] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
  557. <3>[ 1890.887306] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
  558. <3>[ 1890.887322] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
  559. <7>[ 1890.887968] lm8502_mod_brightness: set LED2 brightness (0) percent
  560. <7>[ 1890.888321] lm8502_mod_brightness: set LED1 brightness (0) percent
  561. <7>[ 1890.896455] lm8502_mod_brightness: set LED1 brightness (0) percent
  562. <7>[ 1890.897334] lm8502_mod_brightness: set LED2 brightness (0) percent
  563. <3>[ 1890.901636] msm_wm8958_shutdown_power: codec power shutdown
  564. <3>[ 1890.901660] wm8994_ldo_power: Power down the WM8994 LDOs
  565. <3>[ 1890.901693] wm8994 4-001a: - MEOW wm8994_device_suspend
  566. <4>[ 1890.910457] max8903b_suspend: suspend
  567. <6>[ 1890.912778] PM: suspend of devices complete after 45.481 msecs
  568. <6>[ 1890.914057] PM: late suspend of devices complete after 1.253 msecs
  569. <4>[ 1890.914075] Disabling non-boot CPUs ...
  570. <4>[ 1890.976004] gic_show_resume_irq: 48 triggered
  571. <4>[ 1890.976004] gic_show_resume_irq: 52 triggered
  572. <4>[ 1890.976004] msm_gpio_show_resume_irq: irq 293/gpio 37 triggered wake
  573. <4>[ 1890.976107] Enabling non-boot CPUs ...
  574. <4>[ 1891.082909] CPU1 is up
  575. <6>[ 1891.083366] PM: early resume of devices complete after 0.432 msecs
  576. <6>[ 1891.149315] wakeup wake lock: mmc_delayed_work
  577. <4>[ 1891.149843] mmc1: queuing unknown CIS tuple 0x01 (3 bytes)
  578. <4>[ 1891.150587] mmc1: queuing unknown CIS tuple 0x1a (5 bytes)
  579. <4>[ 1891.150919] mmc1: queuing unknown CIS tuple 0x1b (8 bytes)
  580. <4>[ 1891.150999] mmc1: queuing unknown CIS tuple 0x14 (0 bytes)
  581. <4>[ 1891.151358] max8903b_resume: resume
  582. <3>[ 1891.152693] lsm303dlh_mag_sysfs 0-001e: read transfer error
  583. <3>[ 1891.152710] lsm303dlh_mag_sysfs 0-001e: get_magnetometer_data failed
  584. <3>[ 1891.195622] pm_op(): platform_pm_resume+0x0/0x4c returns -22
  585. <3>[ 1891.195643] PM: Device kgsl-2d1.1 failed to resume: error -22
  586. <3>[ 1891.199929] msm_wm8958_setup_power: codec power setup
  587. <3>[ 1891.199976] wm8994_ldo_power: Power up the WM8994 LDOs
  588. <7>[ 1891.249689] lm8502_mod_brightness: set LED1 brightness (0) percent
  589. <7>[ 1891.250412] lm8502_mod_brightness: set LED2 brightness (0) percent
  590. <6>[ 1891.256177] PM: resume of devices complete after 172.530 msecs
  591. <7>[ 1891.370417] lm8502_mod_brightness: set LED1 brightness (0) percent
  592. <7>[ 1891.370791] lm8502_mod_brightness: set LED2 brightness (0) percent
  593. <4>[ 1891.435915] Restarting tasks ... done.
  594. <6>[ 1891.454111] suspend: exit suspend, ret = 0 (2014-07-12 15:36:07.699030963 UTC)
  595. <3>[ 1891.502879] wm8994-codec wm8994-codec: - MEOW wm8994_resume
  596. <6>[ 1891.618173] PM: Syncing filesystems ... skipped for target platform ... done.
  597. <4>[ 1891.624475] Freezing user space processes ... (elapsed 0.03 seconds) done.
  598. <4>[ 1891.656698] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  599. <4>[ 1891.676645] Suspending console(s) (use no_console_suspend to debug)
  600. <3>[ 1891.702902] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
  601. <3>[ 1891.702927] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
  602. <3>[ 1891.702950] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
  603. <3>[ 1891.722698] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
  604. <3>[ 1891.722720] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
  605. <3>[ 1891.722741] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
  606. <7>[ 1891.723501] lm8502_mod_brightness: set LED2 brightness (0) percent
  607. <7>[ 1891.723877] lm8502_mod_brightness: set LED1 brightness (0) percent
  608. <7>[ 1891.734742] lm8502_mod_brightness: set LED1 brightness (0) percent
  609. <7>[ 1891.735686] lm8502_mod_brightness: set LED2 brightness (0) percent
  610. <3>[ 1891.740138] msm_wm8958_shutdown_power: codec power shutdown
  611. <3>[ 1891.740168] wm8994_ldo_power: Power down the WM8994 LDOs
  612. <3>[ 1891.740209] wm8994 4-001a: - MEOW wm8994_device_suspend
  613. <4>[ 1891.749771] max8903b_suspend: suspend
  614. <6>[ 1891.752954] PM: suspend of devices complete after 59.313 msecs
  615. <6>[ 1891.754517] PM: late suspend of devices complete after 1.529 msecs
  616. <4>[ 1891.754540] Disabling non-boot CPUs ...
  617. <4>[ 1891.827288] gic_show_resume_irq: 48 triggered
  618. <4>[ 1891.827288] gic_show_resume_irq: 52 triggered
  619. <4>[ 1891.827288] msm_gpio_show_resume_irq: irq 293/gpio 37 triggered wake
  620. <4>[ 1891.827415] Enabling non-boot CPUs ...
  621. <3>[ 1891.852352] lsm303dlh_mag_sysfs 0-001e: read transfer error
  622. <3>[ 1891.852378] lsm303dlh_mag_sysfs 0-001e: get_magnetometer_data failed
  623. <4>[ 1891.923128] CPU1 is up
  624. <6>[ 1891.923666] PM: early resume of devices complete after 0.505 msecs
  625. <6>[ 1891.990133] wakeup wake lock: mmc_delayed_work
  626. <4>[ 1891.990791] mmc1: queuing unknown CIS tuple 0x01 (3 bytes)
  627. <4>[ 1891.991738] mmc1: queuing unknown CIS tuple 0x1a (5 bytes)
  628. <4>[ 1891.992161] mmc1: queuing unknown CIS tuple 0x1b (8 bytes)
  629. <4>[ 1891.992343] mmc1: queuing unknown CIS tuple 0x14 (0 bytes)
  630. <4>[ 1891.992797] max8903b_resume: resume
  631. <3>[ 1892.035777] pm_op(): platform_pm_resume+0x0/0x4c returns -22
  632. <3>[ 1892.035804] PM: Device kgsl-2d1.1 failed to resume: error -22
  633. <3>[ 1892.040363] msm_wm8958_setup_power: codec power setup
  634. <3>[ 1892.040422] wm8994_ldo_power: Power up the WM8994 LDOs
  635. <7>[ 1892.091401] lm8502_mod_brightness: set LED1 brightness (0) percent
  636. <7>[ 1892.092187] lm8502_mod_brightness: set LED2 brightness (0) percent
  637. <6>[ 1892.099772] PM: resume of devices complete after 175.764 msecs
  638. <4>[ 1892.282768] Restarting tasks ...
  639. <7>[ 1892.283529] lm8502_mod_brightness: set LED1 brightness (0) percent
  640. <7>[ 1892.294392] lm8502_mod_brightness: set LED2 brightness (0) percent
  641. <4>[ 1892.299333] done.
  642. <3>[ 1892.442906] wm8994-codec wm8994-codec: - MEOW wm8994_resume
  643. <6>[ 1892.545471] suspend: exit suspend, ret = 0 (2014-07-12 15:36:23.947128001 UTC)
  644. <6>[ 1892.607625] PM: Syncing filesystems ... skipped for target platform ... done.
  645. <4>[ 1892.614168] Freezing user space processes ... (elapsed 0.03 seconds) done.
  646. <4>[ 1892.646905] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  647. <4>[ 1892.666757] Suspending console(s) (use no_console_suspend to debug)
  648. <3>[ 1892.697653] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
  649. <3>[ 1892.697687] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
  650. <3>[ 1892.697716] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
  651. <3>[ 1892.722919] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
  652. <3>[ 1892.722948] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
  653. <3>[ 1892.722975] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
  654. <7>[ 1892.723870] lm8502_mod_brightness: set LED2 brightness (0) percent
  655. <7>[ 1892.724275] lm8502_mod_brightness: set LED1 brightness (0) percent
  656. <7>[ 1892.738033] lm8502_mod_brightness: set LED1 brightness (0) percent
  657. <7>[ 1892.739041] lm8502_mod_brightness: set LED2 brightness (0) percent
  658. <3>[ 1892.743706] msm_wm8958_shutdown_power: codec power shutdown
  659. <3>[ 1892.743747] wm8994_ldo_power: Power down the WM8994 LDOs
  660. <3>[ 1892.743804] wm8994 4-001a: - MEOW wm8994_device_suspend
  661. <4>[ 1892.756023] max8903b_suspend: suspend
  662. <6>[ 1892.759539] PM: suspend of devices complete after 74.508 msecs
  663. <6>[ 1892.761812] PM: late suspend of devices complete after 2.226 msecs
  664. <4>[ 1892.761844] Disabling non-boot CPUs ...
  665. <4>[ 1892.830224] gic_show_resume_irq: 48 triggered
  666. <4>[ 1892.830224] gic_show_resume_irq: 52 triggered
  667. <4>[ 1892.830224] msm_gpio_show_resume_irq: irq 293/gpio 37 triggered wake
  668. <4>[ 1892.830410] Enabling non-boot CPUs ...
  669. <4>[ 1892.923412] CPU1 is up
  670. <6>[ 1892.924285] PM: early resume of devices complete after 0.828 msecs
  671. <3>[ 1892.972376] lsm303dlh_mag_sysfs 0-001e: read transfer error
  672. <3>[ 1892.972408] lsm303dlh_mag_sysfs 0-001e: get_magnetometer_data failed
  673. <6>[ 1892.990289] wakeup wake lock: mmc_delayed_work
  674. <4>[ 1892.991120] mmc1: queuing unknown CIS tuple 0x01 (3 bytes)
  675. <4>[ 1892.992451] mmc1: queuing unknown CIS tuple 0x1a (5 bytes)
  676. <4>[ 1892.993001] mmc1: queuing unknown CIS tuple 0x1b (8 bytes)
  677. <4>[ 1892.993135] mmc1: queuing unknown CIS tuple 0x14 (0 bytes)
  678. <4>[ 1892.993703] max8903b_resume: resume
  679. <3>[ 1893.037340] pm_op(): platform_pm_resume+0x0/0x4c returns -22
  680. <3>[ 1893.037374] PM: Device kgsl-2d1.1 failed to resume: error -22
  681. <3>[ 1893.042485] msm_wm8958_setup_power: codec power setup
  682. <3>[ 1893.042555] wm8994_ldo_power: Power up the WM8994 LDOs
  683. <7>[ 1893.094356] lm8502_mod_brightness: set LED1 brightness (0) percent
  684. <7>[ 1893.095187] lm8502_mod_brightness: set LED2 brightness (0) percent
  685. <6>[ 1893.104339] PM: resume of devices complete after 179.479 msecs
  686. <4>[ 1893.289606] Restarting tasks ...
  687. <7>[ 1893.290479] lm8502_mod_brightness: set LED1 brightness (0) percent
  688. <7>[ 1893.304938] lm8502_mod_brightness: set LED2 brightness (0) percent
  689. <4>[ 1893.309030] done.
  690. <3>[ 1893.452981] wm8994-codec wm8994-codec: - MEOW wm8994_resume
  691. <6>[ 1893.556304] suspend: exit suspend, ret = 0 (2014-07-12 15:36:39.953595407 UTC)
  692. <6>[ 1893.593620] PM: Syncing filesystems ... skipped for target platform ... done.
  693. <4>[ 1893.602131] Freezing user space processes ... (elapsed 0.02 seconds) done.
  694. <4>[ 1893.626578] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  695. <4>[ 1893.646504] Suspending console(s) (use no_console_suspend to debug)
  696. <3>[ 1893.664501] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
  697. <3>[ 1893.664531] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
  698. <3>[ 1893.664557] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
  699. <3>[ 1893.689443] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
  700. <3>[ 1893.689469] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
  701. <3>[ 1893.689494] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
  702. <7>[ 1893.690266] lm8502_mod_brightness: set LED2 brightness (0) percent
  703. <7>[ 1893.690646] lm8502_mod_brightness: set LED1 brightness (0) percent
  704. <7>[ 1893.701783] lm8502_mod_brightness: set LED1 brightness (0) percent
  705. <7>[ 1893.702738] lm8502_mod_brightness: set LED2 brightness (0) percent
  706. <3>[ 1893.707194] msm_wm8958_shutdown_power: codec power shutdown
  707. <3>[ 1893.707226] wm8994_ldo_power: Power down the WM8994 LDOs
  708. <3>[ 1893.707269] wm8994 4-001a: - MEOW wm8994_device_suspend
  709. <4>[ 1893.715824] max8903b_suspend: suspend
  710. <6>[ 1893.718349] PM: suspend of devices complete after 61.433 msecs
  711. <6>[ 1893.719890] PM: late suspend of devices complete after 1.505 msecs
  712. <4>[ 1893.719916] Disabling non-boot CPUs ...
  713. <6>[ 1893.724812] cpufreq: cpu 1 is not active.
  714. <6>[ 1893.734823] cpufreq: cpu 1 is not active.
  715. <4>[ 1893.790346] gic_show_resume_irq: 48 triggered
  716. <4>[ 1893.790346] gic_show_resume_irq: 52 triggered
  717. <4>[ 1893.790346] msm_gpio_show_resume_irq: irq 293/gpio 37 triggered wake
  718. <4>[ 1893.790532] Enabling non-boot CPUs ...
  719. <3>[ 1893.882423] lsm303dlh_mag_sysfs 0-001e: read transfer error
  720. <3>[ 1893.882452] lsm303dlh_mag_sysfs 0-001e: get_magnetometer_data failed
  721. <4>[ 1893.883253] CPU1 is up
  722. <6>[ 1893.883754] PM: early resume of devices complete after 0.468 msecs
  723. <6>[ 1893.949666] wakeup wake lock: mmc_delayed_work
  724. <4>[ 1893.950342] mmc1: queuing unknown CIS tuple 0x01 (3 bytes)
  725. <4>[ 1893.951341] mmc1: queuing unknown CIS tuple 0x1a (5 bytes)
  726. <4>[ 1893.951788] mmc1: queuing unknown CIS tuple 0x1b (8 bytes)
  727. <4>[ 1893.951899] mmc1: queuing unknown CIS tuple 0x14 (0 bytes)
  728. <4>[ 1893.952456] max8903b_resume: resume
  729. <3>[ 1893.994736] pm_op(): platform_pm_resume+0x0/0x4c returns -22
  730. <3>[ 1893.994768] PM: Device kgsl-2d1.1 failed to resume: error -22
  731. <3>[ 1893.999472] msm_wm8958_setup_power: codec power setup
  732. <3>[ 1893.999533] wm8994_ldo_power: Power up the WM8994 LDOs
  733. <7>[ 1894.050606] lm8502_mod_brightness: set LED1 brightness (0) percent
  734. <7>[ 1894.051396] lm8502_mod_brightness: set LED2 brightness (0) percent
  735. <6>[ 1894.058959] PM: resume of devices complete after 174.820 msecs
  736. <7>[ 1894.249215] lm8502_mod_brightness: set LED1 brightness (0) percent
  737. <4>[ 1894.249282] Restarting tasks ...
  738. <7>[ 1894.249888] lm8502_mod_brightness: set LED2 brightness (0) percent
  739. <4>[ 1894.266800] done.
  740. <6>[ 1894.266937] suspend: exit suspend, ret = 0 (2014-07-12 15:36:55.709372593 UTC)
  741. <3>[ 1894.402990] wm8994-codec wm8994-codec: - MEOW wm8994_resume
  742. <6>[ 1894.543285] PM: Syncing filesystems ... skipped for target platform ... done.
  743. <4>[ 1894.552128] Freezing user space processes ... (elapsed 0.02 seconds) done.
  744. <4>[ 1894.574092] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  745. <4>[ 1894.594030] Suspending console(s) (use no_console_suspend to debug)
  746. <3>[ 1894.608650] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
  747. <3>[ 1894.608661] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
  748. <3>[ 1894.608670] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
  749. <3>[ 1894.616708] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
  750. <3>[ 1894.616718] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
  751. <3>[ 1894.616727] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
  752. <7>[ 1894.617225] lm8502_mod_brightness: set LED2 brightness (0) percent
  753. <7>[ 1894.617550] lm8502_mod_brightness: set LED1 brightness (0) percent
  754. <7>[ 1894.622105] lm8502_mod_brightness: set LED1 brightness (0) percent
  755. <7>[ 1894.622915] lm8502_mod_brightness: set LED2 brightness (0) percent
  756. <3>[ 1894.627049] msm_wm8958_shutdown_power: codec power shutdown
  757. <3>[ 1894.627064] wm8994_ldo_power: Power down the WM8994 LDOs
  758. <3>[ 1894.627084] wm8994 4-001a: - MEOW wm8994_device_suspend
  759. <4>[ 1894.633527] max8903b_suspend: suspend
  760. <6>[ 1894.635337] PM: suspend of devices complete after 30.954 msecs
  761. <6>[ 1894.636199] PM: late suspend of devices complete after 0.845 msecs
  762. <4>[ 1894.636210] Disabling non-boot CPUs ...
  763. <4>[ 1894.705213] gic_show_resume_irq: 48 triggered
  764. <4>[ 1894.705213] gic_show_resume_irq: 52 triggered
  765. <4>[ 1894.705213] msm_gpio_show_resume_irq: irq 293/gpio 37 triggered wake
  766. <4>[ 1894.705288] Enabling non-boot CPUs ...
  767. <3>[ 1894.792315] lsm303dlh_mag_sysfs 0-001e: read transfer error
  768. <3>[ 1894.792328] lsm303dlh_mag_sysfs 0-001e: get_magnetometer_data failed
  769. <4>[ 1894.802700] CPU1 is up
  770. <6>[ 1894.803057] PM: early resume of devices complete after 0.341 msecs
  771. <6>[ 1894.869270] wakeup wake lock: mmc_delayed_work
  772. <4>[ 1894.869626] mmc1: queuing unknown CIS tuple 0x01 (3 bytes)
  773. <4>[ 1894.870098] mmc1: queuing unknown CIS tuple 0x1a (5 bytes)
  774. <4>[ 1894.870309] mmc1: queuing unknown CIS tuple 0x1b (8 bytes)
  775. <4>[ 1894.870360] mmc1: queuing unknown CIS tuple 0x14 (0 bytes)
  776. <4>[ 1894.870600] max8903b_resume: resume
  777. <3>[ 1894.904130] pm_op(): platform_pm_resume+0x0/0x4c returns -22
  778. <3>[ 1894.904142] PM: Device kgsl-2d1.1 failed to resume: error -22
  779. <3>[ 1894.907835] msm_wm8958_setup_power: codec power setup
  780. <3>[ 1894.907866] wm8994_ldo_power: Power up the WM8994 LDOs
  781. <6>[ 1894.922293] gpio-keys: volume up button released
  782. <6>[ 1894.922306] gpio-keys: volume down button released
  783. <7>[ 1894.956437] lm8502_mod_brightness: set LED1 brightness (0) percent
  784. <7>[ 1894.957101] lm8502_mod_brightness: set LED2 brightness (0) percent
  785. <6>[ 1894.960386] PM: resume of devices complete after 157.127 msecs
  786. <7>[ 1895.068371] lm8502_mod_brightness: set LED1 brightness (0) percent
  787. <7>[ 1895.068712] lm8502_mod_brightness: set LED2 brightness (0) percent
  788. <4>[ 1895.145916] Restarting tasks ... done.
  789. <6>[ 1895.165109] suspend: exit suspend, ret = 0 (2014-07-12 15:37:11.705428889 UTC)
  790. <3>[ 1895.204767] wm8994-codec wm8994-codec: - MEOW wm8994_resume
  791. <6>[ 1895.264160] PM: Syncing filesystems ... skipped for target platform ... done.
  792. <4>[ 1895.270376] Freezing user space processes ... (elapsed 0.02 seconds) done.
  793. <4>[ 1895.294137] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  794. <4>[ 1895.314057] Suspending console(s) (use no_console_suspend to debug)
  795. <3>[ 1895.330959] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
  796. <3>[ 1895.330976] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
  797. <3>[ 1895.330990] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
  798. <3>[ 1895.343749] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
  799. <3>[ 1895.343764] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
  800. <3>[ 1895.343778] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
  801. <7>[ 1895.344376] lm8502_mod_brightness: set LED2 brightness (0) percent
  802. <7>[ 1895.344720] lm8502_mod_brightness: set LED1 brightness (0) percent
  803. <7>[ 1895.351685] lm8502_mod_brightness: set LED1 brightness (0) percent
  804. <7>[ 1895.352550] lm8502_mod_brightness: set LED2 brightness (0) percent
  805. <3>[ 1895.356744] msm_wm8958_shutdown_power: codec power shutdown
  806. <3>[ 1895.356765] wm8994_ldo_power: Power down the WM8994 LDOs
  807. <3>[ 1895.356794] wm8994 4-001a: - MEOW wm8994_device_suspend
  808. <4>[ 1895.362728] max8903b_suspend: suspend
  809. <6>[ 1895.364812] PM: suspend of devices complete after 38.449 msecs
  810. <6>[ 1895.365965] PM: late suspend of devices complete after 1.129 msecs
  811. <4>[ 1895.365982] Disabling non-boot CPUs ...
  812. <4>[ 1895.485890] gic_show_resume_irq: 48 triggered
  813. <4>[ 1895.485890] gic_show_resume_irq: 52 triggered
  814. <4>[ 1895.485890] msm_gpio_show_resume_irq: irq 344/gpio 88 triggered wake
  815. <4>[ 1895.485890] pm8058_show_resume_irq:468 triggered
  816. <4>[ 1895.485985] Enabling non-boot CPUs ...
  817. <3>[ 1895.502387] lsm303dlh_mag_sysfs 0-001e: read transfer error
  818. <3>[ 1895.502405] lsm303dlh_mag_sysfs 0-001e: get_magnetometer_data failed
  819. <4>[ 1895.582917] CPU1 is up
  820. <6>[ 1895.583341] PM: early resume of devices complete after 0.401 msecs
  821. <6>[ 1895.583540] wakeup wake lock: alarm_rtc
  822. <4>[ 1895.649847] mmc1: queuing unknown CIS tuple 0x01 (3 bytes)
  823. <4>[ 1895.650504] mmc1: queuing unknown CIS tuple 0x1a (5 bytes)
  824. <4>[ 1895.650797] mmc1: queuing unknown CIS tuple 0x1b (8 bytes)
  825. <4>[ 1895.650869] mmc1: queuing unknown CIS tuple 0x14 (0 bytes)
  826. <4>[ 1895.651188] max8903b_resume: resume
  827. <3>[ 1895.695581] pm_op(): platform_pm_resume+0x0/0x4c returns -22
  828. <3>[ 1895.695599] PM: Device kgsl-2d1.1 failed to resume: error -22
  829. <3>[ 1895.699581] msm_wm8958_setup_power: codec power setup
  830. <3>[ 1895.699624] wm8994_ldo_power: Power up the WM8994 LDOs
  831. <7>[ 1895.749014] lm8502_mod_brightness: set LED1 brightness (0) percent
  832. <7>[ 1895.749723] lm8502_mod_brightness: set LED2 brightness (0) percent
  833. <6>[ 1895.754773] PM: resume of devices complete after 171.066 msecs
  834. <4>[ 1895.937233] Restarting tasks ...
  835. <7>[ 1895.947766] lm8502_mod_brightness: set LED1 brightness (0) percent
  836. <7>[ 1895.948138] lm8502_mod_brightness: set LED2 brightness (0) percent
  837. <4>[ 1895.951562] done.
  838. <3>[ 1896.093058] wm8994-codec wm8994-codec: - MEOW wm8994_resume
  839. <6>[ 1896.197089] suspend: exit suspend, ret = 0 (2014-07-12 15:37:21.943308148 UTC)
  840. <6>[ 1896.546900] PM: Syncing filesystems ... skipped for target platform ... done.
  841. <4>[ 1896.553220] Freezing user space processes ... (elapsed 0.22 seconds) done.
  842. <4>[ 1896.784472] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  843. <4>[ 1896.804280] Suspending console(s) (use no_console_suspend to debug)
  844. <3>[ 1896.835102] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
  845. <3>[ 1896.835135] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
  846. <3>[ 1896.835163] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
  847. <3>[ 1896.860220] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
  848. <3>[ 1896.860249] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
  849. <3>[ 1896.860275] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
  850. <7>[ 1896.861149] lm8502_mod_brightness: set LED2 brightness (0) percent
  851. <7>[ 1896.861545] lm8502_mod_brightness: set LED1 brightness (0) percent
  852. <7>[ 1896.875228] lm8502_mod_brightness: set LED1 brightness (0) percent
  853. <7>[ 1896.876227] lm8502_mod_brightness: set LED2 brightness (0) percent
  854. <3>[ 1896.880841] msm_wm8958_shutdown_power: codec power shutdown
  855. <3>[ 1896.880882] wm8994_ldo_power: Power down the WM8994 LDOs
  856. <3>[ 1896.880938] wm8994 4-001a: - MEOW wm8994_device_suspend
  857. <4>[ 1896.893294] max8903b_suspend: suspend
  858. <6>[ 1896.896770] PM: suspend of devices complete after 74.118 msecs
  859. <6>[ 1896.899042] PM: late suspend of devices complete after 2.225 msecs
  860. <4>[ 1896.899075] Disabling non-boot CPUs ...
  861. <4>[ 1896.899213] gic_show_resume_irq: 48 triggered
  862. <4>[ 1896.899213] gic_show_resume_irq: 52 triggered
  863. <4>[ 1896.899213] msm_gpio_show_resume_irq: irq 293/gpio 37 triggered wake
  864. <6>[ 1896.900238] PM: early resume of devices complete after 0.816 msecs
  865. <6>[ 1896.970200] wakeup wake lock: mmc_delayed_work
  866. <4>[ 1896.971032] mmc1: queuing unknown CIS tuple 0x01 (3 bytes)
  867. <4>[ 1896.972255] mmc1: queuing unknown CIS tuple 0x1a (5 bytes)
  868. <4>[ 1896.972916] mmc1: queuing unknown CIS tuple 0x1b (8 bytes)
  869. <4>[ 1896.973054] mmc1: queuing unknown CIS tuple 0x14 (0 bytes)
  870. <4>[ 1896.973625] max8903b_resume: resume
  871. <3>[ 1897.017325] pm_op(): platform_pm_resume+0x0/0x4c returns -22
  872. <3>[ 1897.017360] PM: Device kgsl-2d1.1 failed to resume: error -22
  873. <3>[ 1897.022206] msm_wm8958_setup_power: codec power setup
  874. <3>[ 1897.022276] wm8994_ldo_power: Power up the WM8994 LDOs
  875. <7>[ 1897.073655] lm8502_mod_brightness: set LED1 brightness (0) percent
  876. <7>[ 1897.074472] lm8502_mod_brightness: set LED2 brightness (0) percent
  877. <6>[ 1897.083557] PM: resume of devices complete after 182.805 msecs
  878. <4>[ 1897.249310] Restarting tasks ...
  879. <7>[ 1897.263176] lm8502_mod_brightness: set LED1 brightness (0) percent
  880. <7>[ 1897.263596] lm8502_mod_brightness: set LED2 brightness (0) percent
  881. <4>[ 1897.267070] done.
  882. <3>[ 1897.413956] wm8994-codec wm8994-codec: - MEOW wm8994_resume
  883. <6>[ 1897.525512] suspend: exit suspend, ret = 0 (2014-07-12 15:37:37.943669334 UTC)
  884. <6>[ 1897.571009] PM: Syncing filesystems ... skipped for target platform ... done.
  885. <4>[ 1897.581842] Freezing user space processes ... (elapsed 0.02 seconds) done.
  886. <4>[ 1897.604167] Freezing remaining freezable tasks ... (elapsed 0.02 seconds) done.
  887. <4>[ 1897.627743] Suspending console(s) (use no_console_suspend to debug)
  888. <3>[ 1897.642068] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
  889. <3>[ 1897.642079] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
  890. <3>[ 1897.642088] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
  891. <3>[ 1897.650193] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
  892. <3>[ 1897.650202] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
  893. <3>[ 1897.650211] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
  894. <7>[ 1897.650701] lm8502_mod_brightness: set LED2 brightness (0) percent
  895. <7>[ 1897.651021] lm8502_mod_brightness: set LED1 brightness (0) percent
  896. <7>[ 1897.655567] lm8502_mod_brightness: set LED1 brightness (0) percent
  897. <7>[ 1897.656355] lm8502_mod_brightness: set LED2 brightness (0) percent
  898. <3>[ 1897.660432] msm_wm8958_shutdown_power: codec power shutdown
  899. <3>[ 1897.660447] wm8994_ldo_power: Power down the WM8994 LDOs
  900. <3>[ 1897.660467] wm8994 4-001a: - MEOW wm8994_device_suspend
  901. <4>[ 1897.666658] max8903b_suspend: suspend
  902. <6>[ 1897.668438] PM: suspend of devices complete after 30.373 msecs
  903. <6>[ 1897.669298] PM: late suspend of devices complete after 0.844 msecs
  904. <4>[ 1897.669310] Disabling non-boot CPUs ...
  905. <4>[ 1897.669365] gic_show_resume_irq: 48 triggered
  906. <4>[ 1897.669365] gic_show_resume_irq: 52 triggered
  907. <4>[ 1897.669365] msm_gpio_show_resume_irq: irq 344/gpio 88 triggered wake
  908. <4>[ 1897.669365] pm8058_show_resume_irq:468 triggered
  909. <6>[ 1897.669776] PM: early resume of devices complete after 0.334 msecs
  910. <6>[ 1897.669925] wakeup wake lock: alarm_rtc
  911. <4>[ 1897.739496] mmc1: queuing unknown CIS tuple 0x01 (3 bytes)
  912. <4>[ 1897.739971] mmc1: queuing unknown CIS tuple 0x1a (5 bytes)
  913. <4>[ 1897.740182] mmc1: queuing unknown CIS tuple 0x1b (8 bytes)
  914. <4>[ 1897.740232] mmc1: queuing unknown CIS tuple 0x14 (0 bytes)
  915. <4>[ 1897.740469] max8903b_resume: resume
  916. <3>[ 1897.774441] pm_op(): platform_pm_resume+0x0/0x4c returns -22
  917. <3>[ 1897.774455] PM: Device kgsl-2d1.1 failed to resume: error -22
  918. <3>[ 1897.777960] msm_wm8958_setup_power: codec power setup
  919. <3>[ 1897.777992] wm8994_ldo_power: Power up the WM8994 LDOs
  920. <7>[ 1897.838636] lm8502_mod_brightness: set LED1 brightness (0) percent
  921. <7>[ 1897.839297] lm8502_mod_brightness: set LED2 brightness (0) percent
  922. <6>[ 1897.842591] PM: resume of devices complete after 172.534 msecs
  923. <4>[ 1898.012071] Restarting tasks ...
  924. <7>[ 1898.019619] lm8502_mod_brightness: set LED1 brightness (0) percent
  925. <7>[ 1898.019963] lm8502_mod_brightness: set LED2 brightness (0) percent
  926. <4>[ 1898.022151] done.
  927. <3>[ 1898.162994] wm8994-codec wm8994-codec: - MEOW wm8994_resume
  928. <6>[ 1898.272574] suspend: exit suspend, ret = 0 (2014-07-12 15:37:47.930704149 UTC)
  929. <6>[ 1898.328531] PM: Syncing filesystems ... skipped for target platform ... done.
  930. <4>[ 1898.337859] Freezing user space processes ... (elapsed 0.02 seconds) done.
  931. <4>[ 1898.366617] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  932. <4>[ 1898.384067] Suspending console(s) (use no_console_suspend to debug)
  933. <3>[ 1898.401839] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
  934. <3>[ 1898.401862] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
  935. <3>[ 1898.401883] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
  936. <3>[ 1898.421777] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
  937. <3>[ 1898.421799] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
  938. <3>[ 1898.421819] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
  939. <7>[ 1898.422498] lm8502_mod_brightness: set LED2 brightness (0) percent
  940. <7>[ 1898.422860] lm8502_mod_brightness: set LED1 brightness (0) percent
  941. <7>[ 1898.432051] lm8502_mod_brightness: set LED1 brightness (0) percent
  942. <7>[ 1898.432956] lm8502_mod_brightness: set LED2 brightness (0) percent
  943. <3>[ 1898.437310] msm_wm8958_shutdown_power: codec power shutdown
  944. <3>[ 1898.437338] wm8994_ldo_power: Power down the WM8994 LDOs
  945. <3>[ 1898.437374] wm8994 4-001a: - MEOW wm8994_device_suspend
  946. <4>[ 1898.445415] max8903b_suspend: suspend
  947. <6>[ 1898.447764] PM: suspend of devices complete after 53.332 msecs
  948. <6>[ 1898.449091] PM: late suspend of devices complete after 1.297 msecs
  949. <4>[ 1898.449113] Disabling non-boot CPUs ...
  950. <6>[ 1898.454841] cpufreq: cpu 1 is not active.
  951. <6>[ 1898.464851] cpufreq: cpu 1 is not active.
  952. <4>[ 1898.519211] gic_show_resume_irq: 48 triggered
  953. <4>[ 1898.519211] gic_show_resume_irq: 52 triggered
  954. <4>[ 1898.519211] msm_gpio_show_resume_irq: irq 293/gpio 37 triggered wake
  955. <4>[ 1898.519377] Enabling non-boot CPUs ...
  956. <4>[ 1898.613042] CPU1 is up
  957. <6>[ 1898.613499] PM: early resume of devices complete after 0.429 msecs
  958. <6>[ 1898.679417] wakeup wake lock: mmc_delayed_work
  959. <4>[ 1898.679994] mmc1: queuing unknown CIS tuple 0x01 (3 bytes)
  960. <4>[ 1898.680828] mmc1: queuing unknown CIS tuple 0x1a (5 bytes)
  961. <4>[ 1898.681201] mmc1: queuing unknown CIS tuple 0x1b (8 bytes)
  962. <4>[ 1898.681293] mmc1: queuing unknown CIS tuple 0x14 (0 bytes)
  963. <4>[ 1898.681684] max8903b_resume: resume
  964. <3>[ 1898.724653] pm_op(): platform_pm_resume+0x0/0x4c returns -22
  965. <3>[ 1898.724680] PM: Device kgsl-2d1.1 failed to resume: error -22
  966. <3>[ 1898.729090] msm_wm8958_setup_power: codec power setup
  967. <3>[ 1898.729140] wm8994_ldo_power: Power up the WM8994 LDOs
  968. <7>[ 1898.779124] lm8502_mod_brightness: set LED1 brightness (0) percent
  969. <7>[ 1898.779869] lm8502_mod_brightness: set LED2 brightness (0) percent
  970. <6>[ 1898.786202] PM: resume of devices complete after 172.371 msecs
  971. <4>[ 1898.963690] Restarting tasks ...
  972. <7>[ 1898.972966] lm8502_mod_brightness: set LED1 brightness (0) percent
  973. <7>[ 1898.973363] lm8502_mod_brightness: set LED2 brightness (0) percent
  974. <4>[ 1898.974712] done.
  975. <6>[ 1898.974947] suspend: exit suspend, ret = 0 (2014-07-12 15:38:03.689944890 UTC)
  976. <3>[ 1899.123018] wm8994-codec wm8994-codec: - MEOW wm8994_resume
  977. <6>[ 1899.266803] PM: Syncing filesystems ... skipped for target platform ... done.
  978. <4>[ 1899.273211] Freezing user space processes ... (elapsed 0.01 seconds) done.
  979. <4>[ 1899.294240] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  980. <4>[ 1899.314154] Suspending console(s) (use no_console_suspend to debug)
  981. <3>[ 1899.337255] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
  982. <3>[ 1899.337283] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
  983. <3>[ 1899.337310] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
  984. <3>[ 1899.362239] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
  985. <3>[ 1899.362265] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
  986. <3>[ 1899.362290] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
  987. <7>[ 1899.363194] lm8502_mod_brightness: set LED2 brightness (0) percent
  988. <7>[ 1899.363568] lm8502_mod_brightness: set LED1 brightness (0) percent
  989. <7>[ 1899.374797] lm8502_mod_brightness: set LED1 brightness (0) percent
  990. <7>[ 1899.375742] lm8502_mod_brightness: set LED2 brightness (0) percent
  991. <3>[ 1899.380198] msm_wm8958_shutdown_power: codec power shutdown
  992. <3>[ 1899.380231] wm8994_ldo_power: Power down the WM8994 LDOs
  993. <3>[ 1899.380275] wm8994 4-001a: - MEOW wm8994_device_suspend
  994. <4>[ 1899.388843] max8903b_suspend: suspend
  995. <6>[ 1899.391368] PM: suspend of devices complete after 61.885 msecs
  996. <6>[ 1899.393024] PM: late suspend of devices complete after 1.611 msecs
  997. <4>[ 1899.393052] Disabling non-boot CPUs ...
  998. <6>[ 1899.394873] cpufreq: cpu 1 is not active.
  999. <6>[ 1899.412366] cpufreq: cpu 1 is not active.
  1000. <4>[ 1899.470508] gic_show_resume_irq: 48 triggered
  1001. <4>[ 1899.470508] gic_show_resume_irq: 52 triggered
  1002. <4>[ 1899.470508] msm_gpio_show_resume_irq: irq 344/gpio 88 triggered wake
  1003. <4>[ 1899.470508] pm8058_show_resume_irq:468 triggered
  1004. <4>[ 1899.470696] Enabling non-boot CPUs ...
  1005. <4>[ 1899.563235] CPU1 is up
  1006. <6>[ 1899.563735] PM: early resume of devices complete after 0.467 msecs
  1007. <6>[ 1899.563984] wakeup wake lock: alarm_rtc
  1008. <3>[ 1899.602429] lsm303dlh_mag_sysfs 0-001e: read transfer error
  1009. <3>[ 1899.602456] lsm303dlh_mag_sysfs 0-001e: get_magnetometer_data failed
  1010. <4>[ 1899.630354] mmc1: queuing unknown CIS tuple 0x01 (3 bytes)
  1011. <4>[ 1899.631354] mmc1: queuing unknown CIS tuple 0x1a (5 bytes)
  1012. <4>[ 1899.631802] mmc1: queuing unknown CIS tuple 0x1b (8 bytes)
  1013. <4>[ 1899.631913] mmc1: queuing unknown CIS tuple 0x14 (0 bytes)
  1014. <4>[ 1899.632471] max8903b_resume: resume
  1015. <3>[ 1899.674774] pm_op(): platform_pm_resume+0x0/0x4c returns -22
  1016. <3>[ 1899.674806] PM: Device kgsl-2d1.1 failed to resume: error -22
  1017. <3>[ 1899.679537] msm_wm8958_setup_power: codec power setup
  1018. <3>[ 1899.679598] wm8994_ldo_power: Power up the WM8994 LDOs
  1019. <7>[ 1899.730672] lm8502_mod_brightness: set LED1 brightness (0) percent
  1020. <7>[ 1899.731467] lm8502_mod_brightness: set LED2 brightness (0) percent
  1021. <6>[ 1899.739056] PM: resume of devices complete after 174.819 msecs
  1022. <7>[ 1899.852814] lm8502_mod_brightness: set LED1 brightness (0) percent
  1023. <7>[ 1899.853209] lm8502_mod_brightness: set LED2 brightness (0) percent
  1024. <4>[ 1899.939215] Restarting tasks ... done.
  1025. <6>[ 1899.950909] suspend: exit suspend, ret = 0 (2014-07-12 15:38:13.713313482 UTC)
  1026. <3>[ 1899.993026] wm8994-codec wm8994-codec: - MEOW wm8994_resume
  1027. <5>[ 1899.994795] msm_timer_set_next_event(12) clock dg_timer, alarm already expired, now 87e9055e, alarm 87e90566, late -8
  1028. <6>[ 1900.060177] PM: Syncing filesystems ... skipped for target platform ... done.
  1029. <4>[ 1900.068685] Freezing user space processes ... (elapsed 0.02 seconds) done.
  1030. <4>[ 1900.096618] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  1031. <4>[ 1900.116562] Suspending console(s) (use no_console_suspend to debug)
  1032. <3>[ 1900.130250] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
  1033. <3>[ 1900.130262] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
  1034. <3>[ 1900.130271] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
  1035. <3>[ 1900.138388] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
  1036. <3>[ 1900.138398] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
  1037. <3>[ 1900.138407] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
  1038. <7>[ 1900.138930] lm8502_mod_brightness: set LED2 brightness (0) percent
  1039. <7>[ 1900.139280] lm8502_mod_brightness: set LED1 brightness (0) percent
  1040. <7>[ 1900.143805] lm8502_mod_brightness: set LED1 brightness (0) percent
  1041. <7>[ 1900.144691] lm8502_mod_brightness: set LED2 brightness (0) percent
  1042. <3>[ 1900.149165] msm_wm8958_shutdown_power: codec power shutdown
  1043. <3>[ 1900.149199] wm8994_ldo_power: Power down the WM8994 LDOs
  1044. <3>[ 1900.149242] wm8994 4-001a: - MEOW wm8994_device_suspend
  1045. <4>[ 1900.155067] max8903b_suspend: suspend
  1046. <6>[ 1900.157590] PM: suspend of devices complete after 30.505 msecs
  1047. <6>[ 1900.159134] PM: late suspend of devices complete after 1.506 msecs
  1048. <4>[ 1900.159160] Disabling non-boot CPUs ...
  1049. <6>[ 1900.164863] cpufreq: cpu 1 is not active.
  1050. <4>[ 1900.280224] gic_show_resume_irq: 48 triggered
  1051. <4>[ 1900.280224] gic_show_resume_irq: 52 triggered
  1052. <4>[ 1900.280224] msm_gpio_show_resume_irq: irq 293/gpio 37 triggered wake
  1053. <4>[ 1900.280410] Enabling non-boot CPUs ...
  1054. <3>[ 1900.322395] lsm303dlh_mag_sysfs 0-001e: read transfer error
  1055. <3>[ 1900.322423] lsm303dlh_mag_sysfs 0-001e: get_magnetometer_data failed
  1056. <4>[ 1900.373213] CPU1 is up
  1057. <6>[ 1900.373715] PM: early resume of devices complete after 0.468 msecs
  1058. <6>[ 1900.439707] wakeup wake lock: mmc_delayed_work
  1059. <4>[ 1900.440385] mmc1: queuing unknown CIS tuple 0x01 (3 bytes)
  1060. <4>[ 1900.441384] mmc1: queuing unknown CIS tuple 0x1a (5 bytes)
  1061. <4>[ 1900.441831] mmc1: queuing unknown CIS tuple 0x1b (8 bytes)
  1062. <4>[ 1900.441942] mmc1: queuing unknown CIS tuple 0x14 (0 bytes)
  1063. <4>[ 1900.442417] max8903b_resume: resume
  1064. <3>[ 1900.484784] pm_op(): platform_pm_resume+0x0/0x4c returns -22
  1065. <3>[ 1900.484816] PM: Device kgsl-2d1.1 failed to resume: error -22
  1066. <3>[ 1900.489547] msm_wm8958_setup_power: codec power setup
  1067. <3>[ 1900.489607] wm8994_ldo_power: Power up the WM8994 LDOs
  1068. <7>[ 1900.540520] lm8502_mod_brightness: set LED1 brightness (0) percent
  1069. <7>[ 1900.541310] lm8502_mod_brightness: set LED2 brightness (0) percent
  1070. <6>[ 1900.548915] PM: resume of devices complete after 174.812 msecs
  1071. <4>[ 1900.735666] Restarting tasks ...
  1072. <7>[ 1900.736240] lm8502_mod_brightness: set LED1 brightness (0) percent
  1073. <4>[ 1900.748509] done.
  1074. <6>[ 1900.748677] suspend: exit suspend, ret = 0 (2014-07-12 15:38:29.701157926 UTC)
  1075. <7>[ 1900.752853] lm8502_mod_brightness: set LED2 brightness (0) percent
  1076. <6>[ 1900.853119] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
  1077. <3>[ 1900.913014] wm8994-codec wm8994-codec: - MEOW wm8994_resume
  1078. <6>[ 1901.038676] PM: Syncing filesystems ... skipped for target platform ... done.
  1079. <4>[ 1901.048685] Freezing user space processes ... (elapsed 0.02 seconds) done.
  1080. <4>[ 1901.074158] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  1081. <4>[ 1901.094071] Suspending console(s) (use no_console_suspend to debug)
  1082. <3>[ 1901.111570] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
  1083. <3>[ 1901.111584] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
  1084. <3>[ 1901.111596] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
  1085. <3>[ 1901.121469] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
  1086. <3>[ 1901.121481] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
  1087. <3>[ 1901.121492] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
  1088. <7>[ 1901.122042] lm8502_mod_brightness: set LED2 brightness (0) percent
  1089. <7>[ 1901.122370] lm8502_mod_brightness: set LED1 brightness (0) percent
  1090. <7>[ 1901.127852] lm8502_mod_brightness: set LED1 brightness (0) percent
  1091. <7>[ 1901.128709] lm8502_mod_brightness: set LED2 brightness (0) percent
  1092. <3>[ 1901.132922] msm_wm8958_shutdown_power: codec power shutdown
  1093. <3>[ 1901.132939] wm8994_ldo_power: Power down the WM8994 LDOs
  1094. <3>[ 1901.132962] wm8994 4-001a: - MEOW wm8994_device_suspend
  1095. <4>[ 1901.142736] max8903b_suspend: suspend
  1096. <6>[ 1901.144576] PM: suspend of devices complete after 39.525 msecs
  1097. <6>[ 1901.145572] PM: late suspend of devices complete after 0.976 msecs
  1098. <4>[ 1901.145584] Disabling non-boot CPUs ...
  1099. <6>[ 1901.154867] cpufreq: cpu 1 is not active.
  1100. <4>[ 1901.265860] gic_show_resume_irq: 48 triggered
  1101. <4>[ 1901.265860] gic_show_resume_irq: 52 triggered
  1102. <4>[ 1901.265860] msm_gpio_show_resume_irq: irq 293/gpio 37 triggered wake
  1103. <4>[ 1901.265942] Enabling non-boot CPUs ...
  1104. <4>[ 1901.362773] CPU1 is up
  1105. <6>[ 1901.363186] PM: early resume of devices complete after 0.394 msecs
  1106. <6>[ 1901.429228] wakeup wake lock: mmc_delayed_work
  1107. <4>[ 1901.429612] mmc1: queuing unknown CIS tuple 0x01 (3 bytes)
  1108. <4>[ 1901.430128] mmc1: queuing unknown CIS tuple 0x1a (5 bytes)
  1109. <4>[ 1901.430357] mmc1: queuing unknown CIS tuple 0x1b (8 bytes)
  1110. <4>[ 1901.430412] mmc1: queuing unknown CIS tuple 0x14 (0 bytes)
  1111. <4>[ 1901.430633] max8903b_resume: resume
  1112. <3>[ 1901.432367] lsm303dlh_mag_sysfs 0-001e: read transfer error
  1113. <3>[ 1901.432378] lsm303dlh_mag_sysfs 0-001e: get_magnetometer_data failed
  1114. <3>[ 1901.466433] pm_op(): platform_pm_resume+0x0/0x4c returns -22
  1115. <3>[ 1901.466446] PM: Device kgsl-2d1.1 failed to resume: error -22
  1116. <3>[ 1901.470109] msm_wm8958_setup_power: codec power setup
  1117. <3>[ 1901.470141] wm8994_ldo_power: Power up the WM8994 LDOs
  1118. <7>[ 1901.518845] lm8502_mod_brightness: set LED1 brightness (0) percent
  1119. <7>[ 1901.519517] lm8502_mod_brightness: set LED2 brightness (0) percent
  1120. <6>[ 1901.523290] PM: resume of devices complete after 159.868 msecs
  1121. <7>[ 1901.636267] lm8502_mod_brightness: set LED1 brightness (0) percent
  1122. <7>[ 1901.636612] lm8502_mod_brightness: set LED2 brightness (0) percent
  1123. <4>[ 1901.704422] Restarting tasks ... done.
  1124. <6>[ 1901.716520] suspend: exit suspend, ret = 0 (2014-07-12 15:38:44.694082666 UTC)
  1125. <3>[ 1901.762953] wm8994-codec wm8994-codec: - MEOW wm8994_resume
  1126. <6>[ 1901.809908] PM: Syncing filesystems ... skipped for target platform ... done.
  1127. <4>[ 1901.817029] Freezing user space processes ... (elapsed 0.02 seconds) done.
  1128. <4>[ 1901.844162] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  1129. <4>[ 1901.864091] Suspending console(s) (use no_console_suspend to debug)
  1130. <3>[ 1901.885082] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
  1131. <3>[ 1901.885112] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
  1132. <3>[ 1901.885138] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
  1133. <3>[ 1901.910103] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
  1134. <3>[ 1901.910130] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
  1135. <3>[ 1901.910155] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
  1136. <7>[ 1901.910961] lm8502_mod_brightness: set LED2 brightness (0) percent
  1137. <7>[ 1901.911345] lm8502_mod_brightness: set LED1 brightness (0) percent
  1138. <7>[ 1901.922848] lm8502_mod_brightness: set LED1 brightness (0) percent
  1139. <7>[ 1901.923809] lm8502_mod_brightness: set LED2 brightness (0) percent
  1140. <3>[ 1901.927972] msm_wm8958_shutdown_power: codec power shutdown
  1141. <3>[ 1901.927991] wm8994_ldo_power: Power down the WM8994 LDOs
  1142. <3>[ 1901.928017] wm8994 4-001a: - MEOW wm8994_device_suspend
  1143. <4>[ 1901.933622] max8903b_suspend: suspend
  1144. <6>[ 1901.935621] PM: suspend of devices complete after 59.860 msecs
  1145. <6>[ 1901.936676] PM: late suspend of devices complete after 1.034 msecs
  1146. <4>[ 1901.936691] Disabling non-boot CPUs ...
  1147. <4>[ 1902.005633] gic_show_resume_irq: 52 triggered
  1148. <4>[ 1902.005633] gic_show_resume_irq: 133 triggeredEnabling non-boot CPUs ...
  1149. <4>[ 1902.102921] CPU1 is up
  1150. <6>[ 1902.103325] PM: early resume of devices complete after 0.384 msecs
  1151. <6>[ 1902.103487] mmc1: msmsdcc_irq: SDIO async irq received
  1152. <6>[ 1902.103951] wakeup wake lock: mmc1
  1153. <3>[ 1902.132377] lsm303dlh_mag_sysfs 0-001e: read transfer error
  1154. <3>[ 1902.132392] lsm303dlh_mag_sysfs 0-001e: get_magnetometer_data failed
  1155. <4>[ 1902.169771] mmc1: queuing unknown CIS tuple 0x01 (3 bytes)
  1156. <4>[ 1902.170365] mmc1: queuing unknown CIS tuple 0x1a (5 bytes)
  1157. <4>[ 1902.170631] mmc1: queuing unknown CIS tuple 0x1b (8 bytes)
  1158. <4>[ 1902.170696] mmc1: queuing unknown CIS tuple 0x14 (0 bytes)
  1159. <4>[ 1902.170944] max8903b_resume: resume
  1160. <3>[ 1902.215561] pm_op(): platform_pm_resume+0x0/0x4c returns -22
  1161. <3>[ 1902.215578] PM: Device kgsl-2d1.1 failed to resume: error -22
  1162. <3>[ 1902.219517] msm_wm8958_setup_power: codec power setup
  1163. <3>[ 1902.219556] wm8994_ldo_power: Power up the WM8994 LDOs
  1164. <7>[ 1902.268715] lm8502_mod_brightness: set LED1 brightness (0) percent
  1165. <7>[ 1902.269410] lm8502_mod_brightness: set LED2 brightness (0) percent
  1166. <6>[ 1902.273667] PM: resume of devices complete after 169.581 msecs
  1167. <4>[ 1902.447235] Restarting tasks ... done.
  1168. <7>[ 1902.459755] lm8502_mod_brightness: set LED1 brightness (0) percent
  1169. <7>[ 1902.460102] lm8502_mod_brightness: set LED2 brightness (0) percent
  1170. <3>[ 1902.488337] qtaguid: iface_stat: stat_update() lo not found
  1171. <3>[ 1902.488612] qtaguid: iface_stat: stat_update() lo not found
  1172. <3>[ 1902.499664] qtaguid: iface_stat: stat_update() lo not found
  1173. <3>[ 1902.499922] qtaguid: iface_stat: stat_update() lo not found
  1174. <3>[ 1902.603047] wm8994-codec wm8994-codec: - MEOW wm8994_resume
  1175. <6>[ 1902.693796] suspend: exit suspend, ret = 0 (2014-07-12 15:38:46.920804444 UTC)
  1176. <6>[ 1902.744251] PM: Syncing filesystems ... skipped for target platform ... done.
  1177. <4>[ 1902.750422] Freezing user space processes ... (elapsed 0.02 seconds) done.
  1178. <4>[ 1902.774151] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  1179. <4>[ 1902.794060] Suspending console(s) (use no_console_suspend to debug)
  1180. <3>[ 1902.812537] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
  1181. <3>[ 1902.812567] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
  1182. <3>[ 1902.812593] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
  1183. <3>[ 1902.837647] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
  1184. <3>[ 1902.837673] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
  1185. <3>[ 1902.837699] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
  1186. <7>[ 1902.838483] lm8502_mod_brightness: set LED2 brightness (0) percent
  1187. <7>[ 1902.838862] lm8502_mod_brightness: set LED1 brightness (0) percent
  1188. <7>[ 1902.849959] lm8502_mod_brightness: set LED1 brightness (0) percent
  1189. <7>[ 1902.850913] lm8502_mod_brightness: set LED2 brightness (0) percent
  1190. <3>[ 1902.855047] msm_wm8958_shutdown_power: codec power shutdown
  1191. <3>[ 1902.855062] wm8994_ldo_power: Power down the WM8994 LDOs
  1192. <3>[ 1902.855084] wm8994 4-001a: - MEOW wm8994_device_suspend
  1193. <4>[ 1902.861268] max8903b_suspend: suspend
  1194. <6>[ 1902.863100] PM: suspend of devices complete after 58.676 msecs
  1195. <6>[ 1902.863962] PM: late suspend of devices complete after 0.846 msecs
  1196. <4>[ 1902.863974] Disabling non-boot CPUs ...
  1197. <4>[ 1902.985042] gic_show_resume_irq: 48 triggered
  1198. <4>[ 1902.985042] gic_show_resume_irq: 52 triggered
  1199. <4>[ 1902.985042] msm_gpio_show_resume_irq: irq 293/gpio 37 triggered wake
  1200. <4>[ 1902.985042] msm_gpio_show_resume_irq: irq 344/gpio 88 triggered wake
  1201. <4>[ 1902.985042] pm8058_show_resume_irq:480 triggered
  1202. <4>[ 1902.985112] Enabling non-boot CPUs ...
  1203. <3>[ 1903.052368] lsm303dlh_mag_sysfs 0-001e: read transfer error
  1204. <3>[ 1903.052381] lsm303dlh_mag_sysfs 0-001e: get_magnetometer_data failed
  1205. <4>[ 1903.082757] CPU1 is up
  1206. <6>[ 1903.083114] PM: early resume of devices complete after 0.341 msecs
  1207. <6>[ 1903.083312] wakeup wake lock: event1-539
  1208. <4>[ 1903.149659] mmc1: queuing unknown CIS tuple 0x01 (3 bytes)
  1209. <4>[ 1903.150133] mmc1: queuing unknown CIS tuple 0x1a (5 bytes)
  1210. <4>[ 1903.150344] mmc1: queuing unknown CIS tuple 0x1b (8 bytes)
  1211. <4>[ 1903.150395] mmc1: queuing unknown CIS tuple 0x14 (0 bytes)
  1212. <4>[ 1903.150582] max8903b_resume: resume
  1213. <3>[ 1903.184430] pm_op(): platform_pm_resume+0x0/0x4c returns -22
  1214. <3>[ 1903.184442] PM: Device kgsl-2d1.1 failed to resume: error -22
  1215. <3>[ 1903.188027] msm_wm8958_setup_power: codec power setup
  1216. <3>[ 1903.188057] wm8994_ldo_power: Power up the WM8994 LDOs
  1217. <7>[ 1903.236625] lm8502_mod_brightness: set LED1 brightness (0) percent
  1218. <7>[ 1903.237289] lm8502_mod_brightness: set LED2 brightness (0) percent
  1219. <6>[ 1903.240561] PM: resume of devices complete after 157.077 msecs
  1220. <7>[ 1903.301060] lm8502_mod_brightness: set LED1 brightness (0) percent
  1221. <7>[ 1903.301401] lm8502_mod_brightness: set LED2 brightness (0) percent
  1222. <4>[ 1903.427473] Restarting tasks ...
  1223. <6>[ 1903.434017] lsm303dlh_acc_sysfs: hw init start
  1224. <6>[ 1903.438203] request_suspend_state: wakeup (3->0) at 1903425879897 (2014-07-12 15:38:51.698346667 UTC)
  1225. <4>[ 1903.441407] done.
  1226. <6>[ 1903.448458] suspend: exit suspend, ret = 0 (2014-07-12 15:38:51.708604444 UTC)
  1227. <3>[ 1903.449122] wm8994-codec wm8994-codec: - MEOW wm8994_resume
  1228. <6>[ 1903.453047] lsm303dlh_acc_sysfs: hw init done
  1229. <3>[ 1903.497172] lcdc_lg_panel_power: l10 ENABLE
  1230. <7>[ 1913.542399] wlan0: no IPv6 routers present
  1231. <4>[ 1924.552376] ------------[ cut here ]------------
  1232. <4>[ 1924.552483] WARNING: at /home/flintman/source/ever/jelly-bt/kernel/hp/tenderloin/arch/arm/kernel/smp.c:555 resched_cpu+0x4c/0x64()
  1233. <4>[ 1924.567442] Modules linked in: ath6kl cfg80211 compat tun ntfs cifs nls_utf8 [last unloaded: ath6kl]
  1234. <4>[ 1924.576622] [<80049680>] (unwind_backtrace+0x0/0x164) from [<800b49fc>] (warn_slowpath_common+0x4c/0x64)
  1235. <4>[ 1924.586129] [<800b49fc>] (warn_slowpath_common+0x4c/0x64) from [<800b4a2c>] (warn_slowpath_null+0x18/0x1c)
  1236. <4>[ 1924.595936] [<800b4a2c>] (warn_slowpath_null+0x18/0x1c) from [<800aa3b8>] (resched_cpu+0x4c/0x64)
  1237. <4>[ 1924.604532] [<800aa3b8>] (resched_cpu+0x4c/0x64) from [<800b0bcc>] (scheduler_tick+0x1e4/0x2dc)
  1238. <4>[ 1924.613395] [<800b0bcc>] (scheduler_tick+0x1e4/0x2dc) from [<800c04a4>] (update_process_times+0x44/0x50)
  1239. <4>[ 1924.622763] [<800c04a4>] (update_process_times+0x44/0x50) from [<800d76d0>] (tick_sched_timer+0x90/0xd0)
  1240. <4>[ 1924.632226] [<800d76d0>] (tick_sched_timer+0x90/0xd0) from [<800cde58>] (__run_hrtimer.isra.10+0x90/0x118)
  1241. <4>[ 1924.642031] [<800cde58>] (__run_hrtimer.isra.10+0x90/0x118) from [<800ce8ec>] (hrtimer_interrupt+0x134/0x2e0)
  1242. <4>[ 1924.651686] [<800ce8ec>] (hrtimer_interrupt+0x134/0x2e0) from [<80052270>] (msm_timer_interrupt+0x34/0x40)
  1243. <4>[ 1924.661582] [<80052270>] (msm_timer_interrupt+0x34/0x40) from [<800eaae8>] (handle_IRQ_event+0x24/0xc0)
  1244. <4>[ 1924.670860] [<800eaae8>] (handle_IRQ_event+0x24/0xc0) from [<800ecd44>] (handle_percpu_irq+0x4c/0x8c)
  1245. <4>[ 1924.679902] [<800ecd44>] (handle_percpu_irq+0x4c/0x8c) from [<80042088>] (asm_do_IRQ+0x88/0xc8)
  1246. <4>[ 1924.688732] [<80042088>] (asm_do_IRQ+0x88/0xc8) from [<80042b8c>] (__irq_svc+0x4c/0xe4)
  1247. <4>[ 1924.696700] Exception stack(0xa53c3d88 to 0xa53c3dd0)
  1248. <4>[ 1924.701572] 3d80:                   a0f08068 00000000 00000000 00000001 a53c2000 a0f08000
  1249. <4>[ 1924.709734] 3da0: a0f08000 a0f08068 00000000 a0f08068 a0f08068 a0f08000 00000000 a53c3dd0
  1250. <4>[ 1924.717885] 3dc0: 7f18c128 8020be18 60030013 ffffffff
  1251. <4>[ 1924.722942] [<80042b8c>] (__irq_svc+0x4c/0xe4) from [<8020be18>] (do_raw_spin_lock+0x74/0x188)
  1252. <4>[ 1924.731960] [<8020be18>] (do_raw_spin_lock+0x74/0x188) from [<7f18c128>] (aggr_deque_frms+0x34/0x154 [ath6kl])
  1253. <4>[ 1924.741926] [<7f18c128>] (aggr_deque_frms+0x34/0x154 [ath6kl]) from [<7f18de78>] (ath6kl_rx+0x828/0x8fc [ath6kl])
  1254. <4>[ 1924.751874] [<7f18de78>] (ath6kl_rx+0x828/0x8fc [ath6kl]) from [<7f18170c>] (ath6kl_htc_rxmsg_pending_handler+0x94c/0xa7c [ath6kl])
  1255. <4>[ 1924.763909] [<7f18170c>] (ath6kl_htc_rxmsg_pending_handler+0x94c/0xa7c [ath6kl]) from [<7f17e3b4>] (ath6kl_hif_intr_bh_handler+0xf0/0x2a4 [ath6kl])
  1256. <4>[ 1924.777132] [<7f17e3b4>] (ath6kl_hif_intr_bh_handler+0xf0/0x2a4 [ath6kl]) from [<7f193a0c>] (ath6kl_sdio_irq_handler+0x28/0x70 [ath6kl])
  1257. <4>[ 1924.789246] [<7f193a0c>] (ath6kl_sdio_irq_handler+0x28/0x70 [ath6kl]) from [<803bb78c>] (sdio_irq_thread+0x160/0x334)
  1258. <4>[ 1924.799593] [<803bb78c>] (sdio_irq_thread+0x160/0x334) from [<800ca514>] (kthread+0x7c/0x88)
  1259. <4>[ 1924.808094] [<800ca514>] (kthread+0x7c/0x88) from [<800442a0>] (kernel_thread_exit+0x0/0x8)
  1260. <4>[ 1924.816493] ---[ end trace e5b90259ac0b4711 ]---
  1261. <6>[ 1925.178237] msm_device_put:device speaker_stereo_rx set 0
  1262. <6>[ 1925.178292] msm_device_put:device speaker_stereo_rx set 1
  1263. <3>[ 1925.187717] msm_device_put:device freq =48000
  1264. <6>[ 1925.192433] aif1 codec rates are already configured, just return
  1265. <6>[ 1929.773186] msm_device_put:device speaker_stereo_rx set 0
  1266. <6>[ 1948.403114] msm_device_put:device speaker_stereo_rx set 0
  1267. <6>[ 1948.403165] msm_device_put:device speaker_stereo_rx set 1
  1268. <3>[ 1948.412547] msm_device_put:device freq =48000
  1269. <6>[ 1948.425466] aif1 codec rates are already configured, just return
  1270. <6>[ 1951.693558] msm_device_put:device speaker_stereo_rx set 0
  1271. <6>[ 1953.690111] msm_device_put:device speaker_stereo_rx set 0
  1272. <6>[ 1953.690161] msm_device_put:device speaker_stereo_rx set 1
  1273. <3>[ 1953.699643] msm_device_put:device freq =48000
  1274. <6>[ 1953.712433] aif1 codec rates are already configured, just return
  1275. <6>[ 1956.973189] msm_device_put:device speaker_stereo_rx set 0
  1276. <6>[ 1960.909472] request_suspend_state: sleep (0->3) at 1960897148626 (2014-07-12 15:39:49.326636286 UTC)
  1277. <3>[ 1960.932420] lcdc_lg_panel_power: l10 DISABLE
  1278. <6>[ 1961.012591] cfg80211: Calling CRDA to update world regulatory domain
  1279. <6>[ 1961.062804] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
  1280. <3>[ 1961.268988] qtaguid: iface_stat: stat_update() lo not found
  1281. <3>[ 1961.269102] qtaguid: iface_stat: stat_update() lo not found
  1282. <3>[ 1961.282004] qtaguid: iface_stat: stat_update() lo not found
  1283. <3>[ 1961.282113] qtaguid: iface_stat: stat_update() lo not found
  1284. <6>[ 1961.317513] request_suspend_state: wakeup (3->0) at 1961305189219 (2014-07-12 15:39:49.734676434 UTC)
  1285. <6>[ 1961.318469] lsm303dlh_acc_sysfs: hw init start
  1286. <6>[ 1961.346418] lsm303dlh_acc_sysfs: hw init done
  1287. <3>[ 1961.346766] lcdc_lg_panel_power: l10 ENABLE
  1288. <3>[ 1961.663168] board_sdio_wifi_disable
  1289. <6>[ 1961.669697] tenderloin_wifi_power: New regulator mode for 8058_s3: 1
  1290. <6>[ 1961.783252] mmc1: card 0001 removed
  1291. <6>[ 1962.249972] CMTP-ATH6KL v2013-07-23-test
  1292. <3>[ 1962.249997] board_sdio_wifi_enable
  1293. <6>[ 1962.256896] wifi_power(1) 1.8V sdio: set load
  1294. <6>[ 1962.257219] tenderloin_wifi_power: New regulator mode for 8058_s3: 1
  1295. <6>[ 1962.257228] wifi_power(1) 3.3V
  1296. <6>[ 1962.257559] wifi_power(1) 8901_l1 3.3V
  1297. <6>[ 1962.257878] wifi_power(1) 8058_l19 1.8V
  1298. <4>[ 1962.258203] wifi_power(1) CHIP_PWD
  1299. <4>[ 1962.617137] mmc1: queuing unknown CIS tuple 0x01 (3 bytes)
  1300. <4>[ 1962.624428] mmc1: queuing unknown CIS tuple 0x1a (5 bytes)
  1301. <4>[ 1962.627609] mmc1: queuing unknown CIS tuple 0x1b (8 bytes)
  1302. <4>[ 1962.628255] mmc1: queuing unknown CIS tuple 0x14 (0 bytes)
  1303. <4>[ 1962.630825] mmc1: queuing unknown CIS tuple 0x80 (1 bytes)
  1304. <4>[ 1962.630906] mmc1: queuing unknown CIS tuple 0x81 (1 bytes)
  1305. <4>[ 1962.630983] mmc1: queuing unknown CIS tuple 0x82 (1 bytes)
  1306. <6>[ 1962.631023] mmc1: new high speed SDIO card at address 0001
  1307. <3>[ 1962.699555] ath6kl: temporary war to avoid sdio crc error
  1308. <6>[ 1963.148922] ath6kl: ar6003 hw 2.1.1 sdio fw 3.2.0.144 api 3
  1309. <6>[ 1963.149025] ath6kl: firmware supports: sched-scan,sta-p2pdev-duplex,rsn-cap-override
  1310. <6>[ 1963.675909] msm_device_put:device speaker_stereo_rx set 0
  1311. <6>[ 1963.676044] msm_device_put:device speaker_stereo_rx set 1
  1312. <3>[ 1963.685509] msm_device_put:device freq =48000
  1313. <6>[ 1963.704805] aif1 codec rates are already configured, just return
  1314. <3>[ 1964.453194] binder: release proc 2528, transaction 94230, not freed
  1315. <6>[ 1964.525947] adb_release
  1316. <3>[ 1964.529229] android_usb: already disabled
  1317. <6>[ 1964.529592] mtp_bind_config
  1318. <6>[ 1964.529647] adb_bind_config
  1319. <6>[ 1964.539674] adb_open
  1320. <6>[ 1966.963361] msm_device_put:device speaker_stereo_rx set 0
  1321. <3>[ 1969.447709] qtaguid: iface_stat: stat_update() lo not found
  1322. <3>[ 1969.448024] qtaguid: iface_stat: stat_update() lo not found
  1323. <6>[ 1972.883771] ADDRCONF(NETDEV_UP): wlan0: link is not ready
  1324. <6>[ 1974.681835] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
  1325. <3>[ 1976.188468] qtaguid: iface_stat: stat_update() lo not found
  1326. <3>[ 1976.192895] qtaguid: iface_stat: stat_update() lo not found
  1327. <6>[ 1978.506142] msm_device_put:device speaker_stereo_rx set 0
  1328. <6>[ 1978.506194] msm_device_put:device speaker_stereo_rx set 1
  1329. <3>[ 1978.515822] msm_device_put:device freq =48000
  1330. <6>[ 1978.528559] aif1 codec rates are already configured, just return
  1331. <6>[ 1981.783356] msm_device_put:device speaker_stereo_rx set 0
  1332. <3>[ 1984.380254] init: sys_prop: permission denied uid:1201000  name:sys.cpufreq.restored
  1333. <7>[ 1985.132367] wlan0: no IPv6 routers present
  1334. <6>[ 1986.333978] msm_device_put:device speaker_stereo_rx set 0
  1335. <6>[ 1986.334028] msm_device_put:device speaker_stereo_rx set 1
  1336. <3>[ 1986.343475] msm_device_put:device freq =48000
  1337. <6>[ 1986.356358] aif1 codec rates are already configured, just return
  1338. <6>[ 1989.613292] msm_device_put:device speaker_stereo_rx set 0
  1339. <6>[ 1990.076040] request_suspend_state: sleep (0->3) at 1990063715436 (2014-07-12 15:40:18.493203244 UTC)
  1340. <3>[ 1990.104948] lcdc_lg_panel_power: l10 DISABLE
  1341. <6>[ 1990.573905] request_suspend_state: wakeup (3->0) at 1990561581511 (2014-07-12 15:40:18.991068281 UTC)
  1342. <6>[ 1991.206744] lsm303dlh_acc_sysfs: hw init start
  1343. <6>[ 1991.209649] lsm303dlh_acc_sysfs: hw init done
  1344. <3>[ 1991.856381] lcdc_lg_panel_power: l10 ENABLE
  1345. <6>[ 1996.823739] request_suspend_state: sleep (0->3) at 1996811414398 (2014-07-12 15:40:25.240902058 UTC)
  1346. <3>[ 1996.852448] lcdc_lg_panel_power: l10 DISABLE
  1347. <6>[ 1997.319231] lsm303dlh_acc_sysfs: hw init start
  1348. <6>[ 1997.320146] request_suspend_state: wakeup (3->0) at 1997307824619 (2014-07-12 15:40:25.737312279 UTC)
  1349. <6>[ 1997.322553] lsm303dlh_acc_sysfs: hw init done
  1350. <3>[ 1997.366846] lcdc_lg_panel_power: l10 ENABLE
  1351. <6>[ 1997.412584] cfg80211: Calling CRDA for country: US
  1352. <6>[ 1997.464566] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
  1353. <3>[ 1998.075881] board_sdio_wifi_disable
  1354. <6>[ 1998.084343] tenderloin_wifi_power: New regulator mode for 8058_s3: 1
  1355. <6>[ 1998.203357] mmc1: card 0001 removed
  1356. <6>[ 1998.672106] CMTP-ATH6KL v2013-07-23-test
  1357. <3>[ 1998.672133] board_sdio_wifi_enable
  1358. <6>[ 1998.678786] wifi_power(1) 1.8V sdio: set load
  1359. <6>[ 1998.679101] tenderloin_wifi_power: New regulator mode for 8058_s3: 1
  1360. <6>[ 1998.679109] wifi_power(1) 3.3V
  1361. <6>[ 1998.679458] wifi_power(1) 8901_l1 3.3V
  1362. <6>[ 1998.679796] wifi_power(1) 8058_l19 1.8V
  1363. <4>[ 1998.680108] wifi_power(1) CHIP_PWD
  1364. <4>[ 1999.047080] mmc1: queuing unknown CIS tuple 0x01 (3 bytes)
  1365. <4>[ 1999.054248] mmc1: queuing unknown CIS tuple 0x1a (5 bytes)
  1366. <4>[ 1999.057373] mmc1: queuing unknown CIS tuple 0x1b (8 bytes)
  1367. <4>[ 1999.058004] mmc1: queuing unknown CIS tuple 0x14 (0 bytes)
  1368. <4>[ 1999.060601] mmc1: queuing unknown CIS tuple 0x80 (1 bytes)
  1369. <4>[ 1999.060684] mmc1: queuing unknown CIS tuple 0x81 (1 bytes)
  1370. <4>[ 1999.060760] mmc1: queuing unknown CIS tuple 0x82 (1 bytes)
  1371. <6>[ 1999.060800] mmc1: new high speed SDIO card at address 0001
  1372. <3>[ 1999.105846] ath6kl: temporary war to avoid sdio crc error
  1373. <6>[ 1999.593297] ath6kl: ar6003 hw 2.1.1 sdio fw 3.2.0.144 api 3
  1374. <6>[ 1999.593340] ath6kl: firmware supports: sched-scan,sta-p2pdev-duplex,rsn-cap-override
  1375. <6>[ 1999.658163] msm_device_put:device speaker_stereo_rx set 0
  1376. <6>[ 1999.658222] msm_device_put:device speaker_stereo_rx set 1
  1377. <3>[ 1999.667689] msm_device_put:device freq =48000
  1378. <6>[ 1999.680513] aif1 codec rates are already configured, just return
  1379. <6>[ 2001.231293] adb_release
  1380. <3>[ 2001.235269] android_usb: already disabled
  1381. <6>[ 2001.235635] mtp_bind_config
  1382. <6>[ 2001.240891] adb_bind_config
  1383. <6>[ 2001.246200] adb_open
  1384. <3>[ 2002.859828] qtaguid: iface_stat: stat_update() lo not found
  1385. <3>[ 2002.860132] qtaguid: iface_stat: stat_update() lo not found
  1386. <6>[ 2002.933265] msm_device_put:device speaker_stereo_rx set 0
  1387. <5>[ 2004.394918] msm_timer_set_next_event(12) clock dg_timer, alarm already expired, now a6973550, alarm a6973559, late -9
  1388. <5>[ 2004.394993] msm_timer_set_next_event(12) clock dg_timer, alarm already expired, now a69737ad, alarm a69737b6, late -9
  1389. <4>[ 2004.414778] CE: local_timer increased min_delta_ns to 5000 nsec
  1390. <6>[ 2007.530675] msm_device_put:device speaker_stereo_rx set 0
  1391. <6>[ 2007.530731] msm_device_put:device speaker_stereo_rx set 1
  1392. <3>[ 2007.540184] msm_device_put:device freq =48000
  1393. <6>[ 2007.553253] aif1 codec rates are already configured, just return
  1394. <6>[ 2009.470346] ADDRCONF(NETDEV_UP): wlan0: link is not ready
  1395. <6>[ 2011.237120] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
  1396. <3>[ 2012.707692] qtaguid: iface_stat: stat_update() lo not found
  1397. <3>[ 2012.707845] qtaguid: iface_stat: stat_update() lo not found
  1398. <3>[ 2013.074204] binder: release proc 11593, transaction 126897, not freed
  1399. <6>[ 2013.403243] msm_device_put:device speaker_stereo_rx set 0
  1400. <7>[ 2021.792363] wlan0: no IPv6 routers present
  1401. <3>[ 2023.968694] qtaguid: iface_stat: stat_update() lo not found
  1402. <3>[ 2023.969032] qtaguid: iface_stat: stat_update() lo not found
  1403. <3>[ 2024.583056] qtaguid: iface_stat: stat_update() lo not found
  1404. <3>[ 2024.583229] qtaguid: iface_stat: stat_update() lo not found
  1405. <6>[ 2025.346412] msm_device_put:device speaker_stereo_rx set 0
  1406. <6>[ 2025.346465] msm_device_put:device speaker_stereo_rx set 1
  1407. <3>[ 2025.355883] msm_device_put:device freq =48000
  1408. <6>[ 2025.368767] aif1 codec rates are already configured, just return
  1409. <6>[ 2028.623212] msm_device_put:device speaker_stereo_rx set 0
  1410. <6>[ 2030.571035] msm_device_put:device speaker_stereo_rx set 0
  1411. <6>[ 2030.571087] msm_device_put:device speaker_stereo_rx set 1
  1412. <3>[ 2030.580526] msm_device_put:device freq =48000
  1413. <6>[ 2030.593501] aif1 codec rates are already configured, just return
  1414. <6>[ 2033.853213] msm_device_put:device speaker_stereo_rx set 0
  1415. <6>[ 2034.566550] msm_device_put:device speaker_stereo_rx set 0
  1416. <6>[ 2034.566603] msm_device_put:device speaker_stereo_rx set 1
  1417. <3>[ 2034.576025] msm_device_put:device freq =48000
  1418. <6>[ 2034.588951] aif1 codec rates are already configured, just return
  1419. <6>[ 2037.843521] msm_device_put:device speaker_stereo_rx set 0
  1420. <6>[ 2038.278445] msm_device_put:device speaker_stereo_rx set 0
  1421. <6>[ 2038.278498] msm_device_put:device speaker_stereo_rx set 1
  1422. <3>[ 2038.287948] msm_device_put:device freq =48000
  1423. <6>[ 2038.300941] aif1 codec rates are already configured, just return
  1424. <6>[ 2043.603219] msm_device_put:device speaker_stereo_rx set 0
  1425. <6>[ 2054.002102] msm_device_put:device speaker_stereo_rx set 0
  1426. <6>[ 2054.002152] msm_device_put:device speaker_stereo_rx set 1
  1427. <3>[ 2054.011551] msm_device_put:device freq =48000
  1428. <6>[ 2054.024649] aif1 codec rates are already configured, just return
  1429. <6>[ 2057.283167] msm_device_put:device speaker_stereo_rx set 0
  1430. <6>[ 2074.178797] msm_device_put:device speaker_stereo_rx set 0
  1431. <6>[ 2074.178881] msm_device_put:device speaker_stereo_rx set 1
  1432. <3>[ 2074.188297] msm_device_put:device freq =48000
  1433. <6>[ 2074.213189] aif1 codec rates are already configured, just return
  1434. <6>[ 2077.473210] msm_device_put:device speaker_stereo_rx set 0
  1435. <6>[ 2089.282879] msm_device_put:device speaker_stereo_rx set 0
  1436. <6>[ 2089.282929] msm_device_put:device speaker_stereo_rx set 1
  1437. <3>[ 2089.292293] msm_device_put:device freq =48000
  1438. <6>[ 2089.305261] aif1 codec rates are already configured, just return
  1439. <6>[ 2092.573670] msm_device_put:device speaker_stereo_rx set 0
  1440. <6>[ 2119.462574] msm_device_put:device speaker_stereo_rx set 0
  1441. <6>[ 2119.462629] msm_device_put:device speaker_stereo_rx set 1
  1442. <3>[ 2119.471973] msm_device_put:device freq =48000
  1443. <6>[ 2119.479787] aif1 codec rates are already configured, just return
  1444. <6>[ 2122.743523] msm_device_put:device speaker_stereo_rx set 0
  1445. <6>[ 2156.023207] msm_device_put:device speaker_stereo_rx set 0
  1446. <6>[ 2156.023261] msm_device_put:device speaker_stereo_rx set 1
  1447. <3>[ 2156.032878] msm_device_put:device freq =48000
  1448. <6>[ 2156.045566] aif1 codec rates are already configured, just return
  1449. <6>[ 2159.323544] msm_device_put:device speaker_stereo_rx set 0
  1450. <6>[ 2188.259394] msm_device_put:device speaker_stereo_rx set 0
  1451. <6>[ 2188.259445] msm_device_put:device speaker_stereo_rx set 1
  1452. <3>[ 2188.268852] msm_device_put:device freq =48000
  1453. <6>[ 2188.281747] aif1 codec rates are already configured, just return
  1454. <6>[ 2191.567190] msm_device_put:device speaker_stereo_rx set 0
  1455. <6>[ 2193.429919] msm_device_put:device speaker_stereo_rx set 0
  1456. <6>[ 2193.429971] msm_device_put:device speaker_stereo_rx set 1
  1457. <3>[ 2193.439385] msm_device_put:device freq =48000
  1458. <6>[ 2193.452256] aif1 codec rates are already configured, just return
  1459. <6>[ 2196.723506] msm_device_put:device speaker_stereo_rx set 0
  1460. <6>[ 2203.940564] msm_device_put:device speaker_stereo_rx set 0
  1461. <6>[ 2203.940616] msm_device_put:device speaker_stereo_rx set 1
  1462. <3>[ 2203.950020] msm_device_put:device freq =48000
  1463. <6>[ 2203.962920] aif1 codec rates are already configured, just return
  1464. <6>[ 2207.233516] msm_device_put:device speaker_stereo_rx set 0
  1465. <6>[ 2207.378779] msm_device_put:device speaker_stereo_rx set 0
  1466. <6>[ 2207.378830] msm_device_put:device speaker_stereo_rx set 1
  1467. <3>[ 2207.388234] msm_device_put:device freq =48000
  1468. <6>[ 2207.401183] aif1 codec rates are already configured, just return
  1469. <6>[ 2213.013618] msm_device_put:device speaker_stereo_rx set 0
  1470. <6>[ 2221.605601] msm_device_put:device speaker_stereo_rx set 0
  1471. <6>[ 2221.605652] msm_device_put:device speaker_stereo_rx set 1
  1472. <3>[ 2221.615072] msm_device_put:device freq =48000
  1473. <6>[ 2221.627942] aif1 codec rates are already configured, just return
  1474. <6>[ 2224.903562] msm_device_put:device speaker_stereo_rx set 0
  1475. <6>[ 2226.560869] msm_device_put:device speaker_stereo_rx set 0
  1476. <6>[ 2226.560920] msm_device_put:device speaker_stereo_rx set 1
  1477. <3>[ 2226.570323] msm_device_put:device freq =48000
  1478. <6>[ 2226.583350] aif1 codec rates are already configured, just return
  1479. <6>[ 2229.853921] msm_device_put:device speaker_stereo_rx set 0
  1480. <6>[ 2252.230841] msm_device_put:device speaker_stereo_rx set 0
  1481. <6>[ 2252.230892] msm_device_put:device speaker_stereo_rx set 1
  1482. <3>[ 2252.240587] msm_device_put:device freq =48000
  1483. <6>[ 2252.253251] aif1 codec rates are already configured, just return
  1484. <6>[ 2258.503688] msm_device_put:device speaker_stereo_rx set 0
  1485. <6>[ 2273.070773] msm_device_put:device speaker_stereo_rx set 0
  1486. <6>[ 2273.070825] msm_device_put:device speaker_stereo_rx set 1
  1487. <3>[ 2273.080225] msm_device_put:device freq =48000
  1488. <6>[ 2273.093154] aif1 codec rates are already configured, just return
  1489. <6>[ 2276.353301] msm_device_put:device speaker_stereo_rx set 0
  1490. <6>[ 2276.429481] msm_device_put:device speaker_stereo_rx set 0
  1491. <6>[ 2276.429532] msm_device_put:device speaker_stereo_rx set 1
  1492. <3>[ 2276.438936] msm_device_put:device freq =48000
  1493. <6>[ 2276.451774] aif1 codec rates are already configured, just return
  1494. <6>[ 2289.113126] msm_device_put:device speaker_stereo_rx set 0
  1495. <6>[ 2291.357495] msm_device_put:device speaker_stereo_rx set 0
  1496. <6>[ 2291.357547] msm_device_put:device speaker_stereo_rx set 1
  1497. <3>[ 2291.366949] msm_device_put:device freq =48000
  1498. <6>[ 2291.379865] aif1 codec rates are already configured, just return
  1499. <6>[ 2297.343545] msm_device_put:device speaker_stereo_rx set 0
  1500. <6>[ 2298.894541] msm_device_put:device speaker_stereo_rx set 0
  1501. <6>[ 2298.894594] msm_device_put:device speaker_stereo_rx set 1
  1502. <3>[ 2298.904013] msm_device_put:device freq =48000
  1503. <6>[ 2298.917292] aif1 codec rates are already configured, just return
  1504. <6>[ 2304.874495] msm_device_put:device speaker_stereo_rx set 0
  1505. <6>[ 2305.090857] msm_device_put:device speaker_stereo_rx set 0
  1506. <6>[ 2305.090894] msm_device_put:device speaker_stereo_rx set 1
  1507. <3>[ 2305.090903] msm_device_put:device freq =48000
  1508. <6>[ 2305.116639] aif1 codec rates are already configured, just return
  1509. <6>[ 2311.785277] msm_device_put:device speaker_stereo_rx set 0
  1510. <6>[ 2313.487047] msm_device_put:device speaker_stereo_rx set 0
  1511. <6>[ 2313.487098] msm_device_put:device speaker_stereo_rx set 1
  1512. <3>[ 2313.496489] msm_device_put:device freq =48000
  1513. <6>[ 2313.509444] aif1 codec rates are already configured, just return
  1514. <6>[ 2320.883646] msm_device_put:device speaker_stereo_rx set 0
  1515. <6>[ 2321.416674] binder: 539:551 transaction failed 29189, size 56-0
  1516. <6>[ 2322.848114] binder: 539:568 transaction failed 29189, size 136-0
  1517. <6>[ 2323.415900] msm_device_put:device speaker_stereo_rx set 0
  1518. <6>[ 2323.415974] msm_device_put:device speaker_stereo_rx set 1
  1519. <3>[ 2323.425386] msm_device_put:device freq =48000
  1520. <6>[ 2323.432952] aif1 codec rates are already configured, just return
  1521. <6>[ 2327.933568] msm_device_put:device speaker_stereo_rx set 0
  1522. <6>[ 2328.543926] msm_device_put:device speaker_stereo_rx set 0
  1523. <6>[ 2328.543977] msm_device_put:device speaker_stereo_rx set 1
  1524. <3>[ 2328.553385] msm_device_put:device freq =48000
  1525. <6>[ 2328.566541] aif1 codec rates are already configured, just return
  1526. <6>[ 2331.834992] msm_device_put:device speaker_stereo_rx set 0
  1527. <6>[ 2339.830454] msm_device_put:device speaker_stereo_rx set 0
  1528. <6>[ 2339.830506] msm_device_put:device speaker_stereo_rx set 1
  1529. <3>[ 2339.839910] msm_device_put:device freq =48000
  1530. <6>[ 2339.852767] aif1 codec rates are already configured, just return
  1531. <6>[ 2347.513629] msm_device_put:device speaker_stereo_rx set 0
  1532. <6>[ 2355.890106] msm_device_put:device speaker_stereo_rx set 0
  1533. <6>[ 2355.890157] msm_device_put:device speaker_stereo_rx set 1
  1534. <3>[ 2355.899563] msm_device_put:device freq =48000
  1535. <6>[ 2355.912439] aif1 codec rates are already configured, just return
  1536. <6>[ 2362.113124] msm_device_put:device speaker_stereo_rx set 0
  1537. <6>[ 2363.291538] binder: 539:568 transaction failed 29189, size 136-0
  1538. <6>[ 2367.306422] msm_device_put:device speaker_stereo_rx set 0
  1539. <6>[ 2367.306473] msm_device_put:device speaker_stereo_rx set 1
  1540. <3>[ 2367.315892] msm_device_put:device freq =48000
  1541. <6>[ 2367.329357] aif1 codec rates are already configured, just return
  1542. <6>[ 2373.853509] msm_device_put:device speaker_stereo_rx set 0
  1543. <6>[ 2378.429260] msm_device_put:device speaker_stereo_rx set 0
  1544. <6>[ 2378.429311] msm_device_put:device speaker_stereo_rx set 1
  1545. <3>[ 2378.438730] msm_device_put:device freq =48000
  1546. <6>[ 2378.451579] aif1 codec rates are already configured, just return
  1547. <6>[ 2385.063266] msm_device_put:device speaker_stereo_rx set 0
  1548. <6>[ 2385.264404] binder: 539:1655 transaction failed 29189, size 56-0
  1549. <6>[ 2386.409098] binder: 539:568 transaction failed 29189, size 148-0
  1550. <6>[ 2411.631342] msm_device_put:device speaker_stereo_rx set 0
  1551. <6>[ 2411.631394] msm_device_put:device speaker_stereo_rx set 1
  1552. <3>[ 2411.640796] msm_device_put:device freq =48000
  1553. <6>[ 2411.653711] aif1 codec rates are already configured, just return
  1554. <6>[ 2414.933556] msm_device_put:device speaker_stereo_rx set 0
  1555. <6>[ 2427.430214] msm_device_put:device speaker_stereo_rx set 0
  1556. <6>[ 2427.430265] msm_device_put:device speaker_stereo_rx set 1
  1557. <3>[ 2427.439664] msm_device_put:device freq =48000
  1558. <6>[ 2427.452577] aif1 codec rates are already configured, just return
  1559. <6>[ 2430.733557] msm_device_put:device speaker_stereo_rx set 0
  1560. <6>[ 2431.860530] msm_device_put:device speaker_stereo_rx set 0
  1561. <6>[ 2431.860595] msm_device_put:device speaker_stereo_rx set 1
  1562. <3>[ 2431.870016] msm_device_put:device freq =48000
  1563. <6>[ 2431.882878] aif1 codec rates are already configured, just return
  1564. <6>[ 2435.153494] msm_device_put:device speaker_stereo_rx set 0
  1565. <6>[ 2442.589904] msm_device_put:device speaker_stereo_rx set 0
  1566. <6>[ 2442.589963] msm_device_put:device speaker_stereo_rx set 1
  1567. <3>[ 2442.599410] msm_device_put:device freq =48000
  1568. <6>[ 2442.612196] aif1 codec rates are already configured, just return
  1569. <6>[ 2445.883517] msm_device_put:device speaker_stereo_rx set 0
  1570. <6>[ 2453.615900] msm_device_put:device speaker_stereo_rx set 0
  1571. <6>[ 2453.615951] msm_device_put:device speaker_stereo_rx set 1
  1572. <3>[ 2453.625359] msm_device_put:device freq =48000
  1573. <6>[ 2453.638234] aif1 codec rates are already configured, just return
  1574. <6>[ 2456.893599] msm_device_put:device speaker_stereo_rx set 0
  1575. <6>[ 2468.232951] msm_device_put:device speaker_stereo_rx set 0
  1576. <6>[ 2468.233002] msm_device_put:device speaker_stereo_rx set 1
  1577. <3>[ 2468.242408] msm_device_put:device freq =48000
  1578. <6>[ 2468.267131] aif1 codec rates are already configured, just return
  1579. <6>[ 2471.533546] msm_device_put:device speaker_stereo_rx set 0
  1580. <6>[ 2473.090867] msm_device_put:device speaker_stereo_rx set 0
  1581. <6>[ 2473.090917] msm_device_put:device speaker_stereo_rx set 1
  1582. <3>[ 2473.100323] msm_device_put:device freq =48000
  1583. <6>[ 2473.113214] aif1 codec rates are already configured, just return
  1584. <6>[ 2476.373194] msm_device_put:device speaker_stereo_rx set 0
  1585. <6>[ 2488.824938] msm_device_put:device speaker_stereo_rx set 0
  1586. <6>[ 2488.824989] msm_device_put:device speaker_stereo_rx set 1
  1587. <3>[ 2488.834385] msm_device_put:device freq =48000
  1588. <6>[ 2488.847259] aif1 codec rates are already configured, just return
  1589. <6>[ 2492.113596] msm_device_put:device speaker_stereo_rx set 0
  1590. <6>[ 2492.220108] msm_device_put:device speaker_stereo_rx set 0
  1591. <6>[ 2492.220186] msm_device_put:device speaker_stereo_rx set 1
  1592. <3>[ 2492.229583] msm_device_put:device freq =48000
  1593. <6>[ 2492.242975] aif1 codec rates are already configured, just return
  1594. <4>[ 2492.297632] ------------[ cut here ]------------
  1595. <4>[ 2492.297714] WARNING: at /home/flintman/source/ever/jelly-bt/kernel/hp/tenderloin/kernel/mutex.c:214 __mutex_lock_slowpath+0x70/0x314()
  1596. <4>[ 2492.313041] Modules linked in: ath6kl cfg80211 compat tun ntfs cifs nls_utf8 [last unloaded: ath6kl]
  1597. <4>[ 2492.322211] [<80049680>] (unwind_backtrace+0x0/0x164) from [<800b49fc>] (warn_slowpath_common+0x4c/0x64)
  1598. <4>[ 2492.331730] [<800b49fc>] (warn_slowpath_common+0x4c/0x64) from [<800b4a2c>] (warn_slowpath_null+0x18/0x1c)
  1599. <4>[ 2492.341536] [<800b4a2c>] (warn_slowpath_null+0x18/0x1c) from [<80525c5c>] (__mutex_lock_slowpath+0x70/0x314)
  1600. <4>[ 2492.351171] [<80525c5c>] (__mutex_lock_slowpath+0x70/0x314) from [<80525f0c>] (mutex_lock+0xc/0x20)
  1601. <4>[ 2492.360296] [<80525f0c>] (mutex_lock+0xc/0x20) from [<8006a68c>] (q6asm_add_hdr+0x70/0x110)
  1602. <4>[ 2492.368628] [<8006a68c>] (q6asm_add_hdr+0x70/0x110) from [<8007079c>] (q6asm_cmd_nowait+0x40/0x208)
  1603. <4>[ 2492.377665] [<8007079c>] (q6asm_cmd_nowait+0x40/0x208) from [<803f71dc>] (msm_dsp_trigger+0x178/0x240)
  1604. <4>[ 2492.387041] [<803f71dc>] (msm_dsp_trigger+0x178/0x240) from [<803e68b0>] (soc_pcm_trigger+0x80/0xa4)
  1605. <4>[ 2492.395967] [<803e68b0>] (soc_pcm_trigger+0x80/0xa4) from [<803e016c>] (snd_pcm_do_stop+0x4c/0x54)
  1606. <4>[ 2492.405078] [<803e016c>] (snd_pcm_do_stop+0x4c/0x54) from [<803dfdc4>] (snd_pcm_action_single+0x38/0x64)
  1607. <4>[ 2492.414369] [<803dfdc4>] (snd_pcm_action_single+0x38/0x64) from [<803e45dc>] (snd_pcm_update_state+0x9c/0xdc)
  1608. <4>[ 2492.424180] [<803e45dc>] (snd_pcm_update_state+0x9c/0xdc) from [<803e47f8>] (snd_pcm_update_hw_ptr0+0x1dc/0x1f8)
  1609. <4>[ 2492.434421] [<803e47f8>] (snd_pcm_update_hw_ptr0+0x1dc/0x1f8) from [<803e48d4>] (snd_pcm_period_elapsed+0xc0/0xd4)
  1610. <4>[ 2492.444925] [<803e48d4>] (snd_pcm_period_elapsed+0xc0/0xd4) from [<803f6584>] (event_handler+0x168/0x720)
  1611. <4>[ 2492.454214] [<803f6584>] (event_handler+0x168/0x720) from [<8006aec8>] (q6asm_callback+0x5ac/0x730)
  1612. <4>[ 2492.463415] [<8006aec8>] (q6asm_callback+0x5ac/0x730) from [<80066a60>] (apr_cb_func+0x578/0x6b8)
  1613. <4>[ 2492.472095] [<80066a60>] (apr_cb_func+0x578/0x6b8) from [<800677f8>] (apr_tal_notify+0x228/0x30c)
  1614. <4>[ 2492.480953] [<800677f8>] (apr_tal_notify+0x228/0x30c) from [<800573a4>] (handle_smd_irq+0x140/0x180)
  1615. <4>[ 2492.490150] [<800573a4>] (handle_smd_irq+0x140/0x180) from [<80057414>] (smd_dsp_irq_handler+0x10/0x20)
  1616. <4>[ 2492.499622] [<80057414>] (smd_dsp_irq_handler+0x10/0x20) from [<800eaae8>] (handle_IRQ_event+0x24/0xc0)
  1617. <4>[ 2492.508992] [<800eaae8>] (handle_IRQ_event+0x24/0xc0) from [<800eccac>] (handle_edge_irq+0x13c/0x188)
  1618. <4>[ 2492.518032] [<800eccac>] (handle_edge_irq+0x13c/0x188) from [<80042088>] (asm_do_IRQ+0x88/0xc8)
  1619. <4>[ 2492.526867] [<80042088>] (asm_do_IRQ+0x88/0xc8) from [<80042b8c>] (__irq_svc+0x4c/0xe4)
  1620. <4>[ 2492.534835] Exception stack(0x8071ff30 to 0x8071ff78)
  1621. <4>[ 2492.539701] ff20:                                     00000000 00000000 00000001 00000000
  1622. <4>[ 2492.547868] ff40: 000004dc 8be04a30 00000000 00000000 8be06190 8be04a44 0bdc5000 00000000
  1623. <4>[ 2492.556024] ff60: 00000000 8071ff78 800cf910 8009194c 600b0013 ffffffff
  1624. <4>[ 2492.562806] [<80042b8c>] (__irq_svc+0x4c/0xe4) from [<8009194c>] (msm_cpuidle_enter+0x108/0x128)
  1625. <4>[ 2492.571488] [<8009194c>] (msm_cpuidle_enter+0x108/0x128) from [<803b15c0>] (cpuidle_idle_call+0xc4/0x124)
  1626. <4>[ 2492.580948] [<803b15c0>] (cpuidle_idle_call+0xc4/0x124) from [<800445f0>] (cpu_idle+0x84/0xe8)
  1627. <4>[ 2492.589802] [<800445f0>] (cpu_idle+0x84/0xe8) from [<80008ba8>] (start_kernel+0x2b4/0x320)
  1628. <4>[ 2492.598045] [<80008ba8>] (start_kernel+0x2b4/0x320) from [<40208084>] (0x40208084)
  1629. <4>[ 2492.605581] ---[ end trace e5b90259ac0b4712 ]---
  1630. <6>[ 2494.680464] binder: release 14756:14937 transaction 227569 in, still active
  1631. <6>[ 2494.680479] binder: send failed reply for transaction 227569 to 13216:16141
  1632. <6>[ 2494.680498] binder: release 14756:16167 transaction 227617 in, still active
  1633. <6>[ 2494.680508] binder: send failed reply for transaction 227617 to 13216:16142
  1634. <6>[ 2496.593432] msm_device_put:device speaker_stereo_rx set 0
  1635. <6>[ 2500.363146] binder: release 16301:16318 transaction 233083 in, still active
  1636. <6>[ 2500.363177] binder: send failed reply for transaction 233083 to 13216:16142
  1637. <6>[ 2500.376224] binder: send failed reply for transaction 233197 to 539:568
  1638. <6>[ 2500.782520] binder: release 16355:16366 transaction 233522 in, still active
  1639. <6>[ 2500.782549] binder: send failed reply for transaction 233522 to 13216:16142
  1640. <6>[ 2500.795521] binder: release 16355:16370 transaction 233468 in, still active
  1641. <6>[ 2500.802450] binder: send failed reply for transaction 233468 to 13216:16141
  1642. <6>[ 2500.809300] binder: release 16355:16372 transaction 233523 in, still active
  1643. <6>[ 2500.822409] binder: send failed reply for transaction 233523 to 539:568
  1644. <6>[ 2505.464875] msm_device_put:device speaker_stereo_rx set 0
  1645. <6>[ 2505.464927] msm_device_put:device speaker_stereo_rx set 1
  1646. <3>[ 2505.474377] msm_device_put:device freq =48000
  1647. <6>[ 2505.487380] aif1 codec rates are already configured, just return
  1648. <6>[ 2510.413152] msm_device_put:device speaker_stereo_rx set 0
  1649. <6>[ 2510.953582] binder: release 16373:16386 transaction 234097 in, still active
  1650. <6>[ 2510.953611] binder: send failed reply for transaction 234097 to 13216:16141
  1651. <6>[ 2510.966507] binder: release 16373:16389 transaction 234277 in, still active
  1652. <6>[ 2510.973516] binder: send failed reply for transaction 234277 to 13216:16142
  1653. <6>[ 2512.156176] binder: release 16396:16407 transaction 243128 in, still active
  1654. <6>[ 2512.156205] binder: send failed reply for transaction 243128 to 539:568
  1655. <6>[ 2512.171303] binder: release 16396:16410 transaction 241848 in, still active
  1656. <6>[ 2512.171330] binder: send failed reply for transaction 241848 to 13216:16142
  1657. <6>[ 2512.184288] binder: release 16396:16411 transaction 241807 in, still active
  1658. <6>[ 2512.191547] binder: send failed reply for transaction 241807 to 13216:16141
  1659. <6>[ 2521.534935] msm_device_put:device speaker_stereo_rx set 0
  1660. <6>[ 2521.534986] msm_device_put:device speaker_stereo_rx set 1
  1661. <3>[ 2521.544382] msm_device_put:device freq =48000
  1662. <6>[ 2521.557289] aif1 codec rates are already configured, just return
  1663. <6>[ 2524.813525] msm_device_put:device speaker_stereo_rx set 0
  1664. <6>[ 2575.597135] msm_device_put:device speaker_stereo_rx set 0
  1665. <6>[ 2575.597170] msm_device_put:device speaker_stereo_rx set 1
  1666. <3>[ 2575.597179] msm_device_put:device freq =48000
  1667. <6>[ 2575.622924] aif1 codec rates are already configured, just return
  1668. <6>[ 2578.898134] msm_device_put:device speaker_stereo_rx set 0
  1669. <6>[ 2585.454463] msm_device_put:device speaker_stereo_rx set 0
  1670. <6>[ 2585.454594] msm_device_put:device speaker_stereo_rx set 1
  1671. <3>[ 2585.463995] msm_device_put:device freq =48000
  1672. <6>[ 2585.483436] aif1 codec rates are already configured, just return
  1673. <6>[ 2593.843510] msm_device_put:device speaker_stereo_rx set 0
  1674. <6>[ 2594.952006] msm_device_put:device speaker_stereo_rx set 0
  1675. <6>[ 2594.952057] msm_device_put:device speaker_stereo_rx set 1
  1676. <3>[ 2594.961450] msm_device_put:device freq =48000
  1677. <6>[ 2594.976310] aif1 codec rates are already configured, just return
  1678. <6>[ 2598.243205] msm_device_put:device speaker_stereo_rx set 0
  1679. <6>[ 2608.639383] msm_device_put:device speaker_stereo_rx set 0
  1680. <6>[ 2608.639455] msm_device_put:device speaker_stereo_rx set 1
  1681. <3>[ 2608.648883] msm_device_put:device freq =48000
  1682. <6>[ 2608.662230] aif1 codec rates are already configured, just return
  1683. <6>[ 2611.934612] msm_device_put:device speaker_stereo_rx set 0
  1684. <6>[ 2617.344268] msm_device_put:device speaker_stereo_rx set 0
  1685. <6>[ 2617.344324] msm_device_put:device speaker_stereo_rx set 1
  1686. <3>[ 2617.353735] msm_device_put:device freq =48000
  1687. <6>[ 2617.367179] aif1 codec rates are already configured, just return
  1688. <6>[ 2620.623413] msm_device_put:device speaker_stereo_rx set 0
  1689. <6>[ 2628.137160] msm_device_put:device speaker_stereo_rx set 0
  1690. <6>[ 2628.137211] msm_device_put:device speaker_stereo_rx set 1
  1691. <3>[ 2628.146632] msm_device_put:device freq =48000
  1692. <6>[ 2628.159819] aif1 codec rates are already configured, just return
  1693. <6>[ 2631.423632] msm_device_put:device speaker_stereo_rx set 0
  1694. <6>[ 2633.864307] msm_device_put:device speaker_stereo_rx set 0
  1695. <6>[ 2633.864358] msm_device_put:device speaker_stereo_rx set 1
  1696. <3>[ 2633.873758] msm_device_put:device freq =48000
  1697. <6>[ 2633.886631] aif1 codec rates are already configured, just return
  1698. <6>[ 2638.478087] msm_device_put:device speaker_stereo_rx set 0
  1699. <6>[ 2639.580322] msm_device_put:device speaker_stereo_rx set 0
  1700. <6>[ 2639.580372] msm_device_put:device speaker_stereo_rx set 1
  1701. <3>[ 2639.589780] msm_device_put:device freq =48000
  1702. <6>[ 2639.602663] aif1 codec rates are already configured, just return
  1703. <6>[ 2642.873502] msm_device_put:device speaker_stereo_rx set 0
  1704. <6>[ 2659.245993] msm_device_put:device speaker_stereo_rx set 0
  1705. <6>[ 2659.246044] msm_device_put:device speaker_stereo_rx set 1
  1706. <3>[ 2659.255492] msm_device_put:device freq =48000
  1707. <6>[ 2659.268398] aif1 codec rates are already configured, just return
  1708. <4>[ 2660.562400] ------------[ cut here ]------------
  1709. <4>[ 2660.562508] WARNING: at /home/flintman/source/ever/jelly-bt/kernel/hp/tenderloin/arch/arm/kernel/smp.c:555 resched_cpu+0x4c/0x64()
  1710. <4>[ 2660.577470] Modules linked in: ath6kl cfg80211 compat tun ntfs cifs nls_utf8 [last unloaded: ath6kl]
  1711. <4>[ 2660.586651] [<80049680>] (unwind_backtrace+0x0/0x164) from [<800b49fc>] (warn_slowpath_common+0x4c/0x64)
  1712. <4>[ 2660.596158] [<800b49fc>] (warn_slowpath_common+0x4c/0x64) from [<800b4a2c>] (warn_slowpath_null+0x18/0x1c)
  1713. <4>[ 2660.605963] [<800b4a2c>] (warn_slowpath_null+0x18/0x1c) from [<800aa3b8>] (resched_cpu+0x4c/0x64)
  1714. <4>[ 2660.614560] [<800aa3b8>] (resched_cpu+0x4c/0x64) from [<800b0bcc>] (scheduler_tick+0x1e4/0x2dc)
  1715. <4>[ 2660.623424] [<800b0bcc>] (scheduler_tick+0x1e4/0x2dc) from [<800c04a4>] (update_process_times+0x44/0x50)
  1716. <4>[ 2660.632789] [<800c04a4>] (update_process_times+0x44/0x50) from [<800d76d0>] (tick_sched_timer+0x90/0xd0)
  1717. <4>[ 2660.642253] [<800d76d0>] (tick_sched_timer+0x90/0xd0) from [<800cde58>] (__run_hrtimer.isra.10+0x90/0x118)
  1718. <4>[ 2660.652058] [<800cde58>] (__run_hrtimer.isra.10+0x90/0x118) from [<800ce8ec>] (hrtimer_interrupt+0x134/0x2e0)
  1719. <4>[ 2660.661712] [<800ce8ec>] (hrtimer_interrupt+0x134/0x2e0) from [<80052270>] (msm_timer_interrupt+0x34/0x40)
  1720. <4>[ 2660.671607] [<80052270>] (msm_timer_interrupt+0x34/0x40) from [<800eaae8>] (handle_IRQ_event+0x24/0xc0)
  1721. <4>[ 2660.680886] [<800eaae8>] (handle_IRQ_event+0x24/0xc0) from [<800ecd44>] (handle_percpu_irq+0x4c/0x8c)
  1722. <4>[ 2660.689929] [<800ecd44>] (handle_percpu_irq+0x4c/0x8c) from [<80042088>] (asm_do_IRQ+0x88/0xc8)
  1723. <4>[ 2660.698760] [<80042088>] (asm_do_IRQ+0x88/0xc8) from [<80042b8c>] (__irq_svc+0x4c/0xe4)
  1724. <4>[ 2660.706727] Exception stack(0xb72e7de8 to 0xb72e7e30)
  1725. <4>[ 2660.711598] 7de0:                   80768060 80768074 80768074 00000000 80768064 b72e6000
  1726. <4>[ 2660.719759] 7e00: 20010013 b72e8700 80768074 bca21340 bddef01f 0000b188 11111111 b72e7e30
  1727. <4>[ 2660.727913] 7e20: 80525e80 80525eb0 60010013 ffffffff
  1728. <4>[ 2660.732966] [<80042b8c>] (__irq_svc+0x4c/0xe4) from [<80525eb0>] (__mutex_lock_slowpath+0x2c4/0x314)
  1729. <4>[ 2660.742161] [<80525eb0>] (__mutex_lock_slowpath+0x2c4/0x314) from [<80525f0c>] (mutex_lock+0xc/0x20)
  1730. <4>[ 2660.751296] [<80525f0c>] (mutex_lock+0xc/0x20) from [<80167fdc>] (sysfs_permission+0x1c/0x48)
  1731. <4>[ 2660.759704] [<80167fdc>] (sysfs_permission+0x1c/0x48) from [<8012bb08>] (exec_permission+0x1c/0x64)
  1732. <4>[ 2660.768899] [<8012bb08>] (exec_permission+0x1c/0x64) from [<8012c544>] (link_path_walk+0x64/0xa50)
  1733. <4>[ 2660.777927] [<8012c544>] (link_path_walk+0x64/0xa50) from [<8012ed88>] (do_filp_open+0xc8/0x4c4)
  1734. <4>[ 2660.786524] [<8012ed88>] (do_filp_open+0xc8/0x4c4) from [<8012349c>] (do_sys_open+0x58/0x10c)
  1735. <4>[ 2660.794938] [<8012349c>] (do_sys_open+0x58/0x10c) from [<80043080>] (ret_fast_syscall+0x0/0x30)
  1736. <4>[ 2660.803775] ---[ end trace e5b90259ac0b4713 ]---
  1737. <6>[ 2662.533488] msm_device_put:device speaker_stereo_rx set 0
  1738. <6>[ 2684.170379] msm_device_put:device speaker_stereo_rx set 0
  1739. <6>[ 2684.170485] msm_device_put:device speaker_stereo_rx set 1
  1740. <3>[ 2684.179900] msm_device_put:device freq =48000
  1741. <6>[ 2684.192785] aif1 codec rates are already configured, just return
  1742. <6>[ 2687.453519] msm_device_put:device speaker_stereo_rx set 0
  1743. <6>[ 2689.986870] msm_device_put:device speaker_stereo_rx set 0
  1744. <6>[ 2689.986922] msm_device_put:device speaker_stereo_rx set 1
  1745. <3>[ 2689.996345] msm_device_put:device freq =48000
  1746. <6>[ 2690.009225] aif1 codec rates are already configured, just return
  1747. <6>[ 2693.263519] msm_device_put:device speaker_stereo_rx set 0
  1748. <6>[ 2697.772260] msm_device_put:device speaker_stereo_rx set 0
  1749. <6>[ 2697.772493] msm_device_put:device speaker_stereo_rx set 1
  1750. <3>[ 2697.781709] msm_device_put:device freq =48000
  1751. <6>[ 2697.801192] aif1 codec rates are already configured, just return
  1752. <6>[ 2701.073625] msm_device_put:device speaker_stereo_rx set 0
  1753. <6>[ 2723.566751] msm_device_put:device speaker_stereo_rx set 0
  1754. <6>[ 2723.566803] msm_device_put:device speaker_stereo_rx set 1
  1755. <3>[ 2723.576204] msm_device_put:device freq =48000
  1756. <6>[ 2723.589112] aif1 codec rates are already configured, just return
  1757. <6>[ 2726.853561] msm_device_put:device speaker_stereo_rx set 0
  1758. <6>[ 2729.725013] msm_device_put:device speaker_stereo_rx set 0
  1759. <6>[ 2729.725049] msm_device_put:device speaker_stereo_rx set 1
  1760. <3>[ 2729.725057] msm_device_put:device freq =48000
  1761. <6>[ 2729.752609] aif1 codec rates are already configured, just return
  1762. <6>[ 2733.023528] msm_device_put:device speaker_stereo_rx set 0
  1763. <6>[ 2733.279922] msm_device_put:device speaker_stereo_rx set 0
  1764. <6>[ 2733.279973] msm_device_put:device speaker_stereo_rx set 1
  1765. <3>[ 2733.289366] msm_device_put:device freq =48000
  1766. <6>[ 2733.302291] aif1 codec rates are already configured, just return
  1767. <6>[ 2736.563524] msm_device_put:device speaker_stereo_rx set 0
  1768. <6>[ 2736.933904] msm_device_put:device speaker_stereo_rx set 0
  1769. <6>[ 2736.933955] msm_device_put:device speaker_stereo_rx set 1
  1770. <3>[ 2736.943357] msm_device_put:device freq =48000
  1771. <6>[ 2736.956232] aif1 codec rates are already configured, just return
  1772. <6>[ 2740.223633] msm_device_put:device speaker_stereo_rx set 0
  1773. <6>[ 2743.019923] msm_device_put:device speaker_stereo_rx set 0
  1774. <6>[ 2743.019972] msm_device_put:device speaker_stereo_rx set 1
  1775. <3>[ 2743.029380] msm_device_put:device freq =48000
  1776. <6>[ 2743.042238] aif1 codec rates are already configured, just return
  1777. <6>[ 2746.303497] msm_device_put:device speaker_stereo_rx set 0
  1778. <6>[ 2749.351651] msm_device_put:device speaker_stereo_rx set 0
  1779. <6>[ 2749.351709] msm_device_put:device speaker_stereo_rx set 1
  1780. <3>[ 2749.361133] msm_device_put:device freq =48000
  1781. <6>[ 2749.374325] aif1 codec rates are already configured, just return
  1782. <6>[ 2752.643168] msm_device_put:device speaker_stereo_rx set 0
  1783. <6>[ 2753.747231] msm_device_put:device speaker_stereo_rx set 0
  1784. <6>[ 2753.747281] msm_device_put:device speaker_stereo_rx set 1
  1785. <3>[ 2753.756687] msm_device_put:device freq =48000
  1786. <6>[ 2753.769542] aif1 codec rates are already configured, just return
  1787. <6>[ 2757.043521] msm_device_put:device speaker_stereo_rx set 0
  1788. <6>[ 2757.521360] msm_device_put:device speaker_stereo_rx set 0
  1789. <6>[ 2757.521410] msm_device_put:device speaker_stereo_rx set 1
  1790. <3>[ 2757.530811] msm_device_put:device freq =48000
  1791. <6>[ 2757.543923] aif1 codec rates are already configured, just return
  1792. <6>[ 2760.803612] msm_device_put:device speaker_stereo_rx set 0
  1793. <6>[ 2761.055579] msm_device_put:device speaker_stereo_rx set 0
  1794. <6>[ 2761.055629] msm_device_put:device speaker_stereo_rx set 1
  1795. <3>[ 2761.065045] msm_device_put:device freq =48000
  1796. <6>[ 2761.077909] aif1 codec rates are already configured, just return
  1797. <6>[ 2764.355821] msm_device_put:device speaker_stereo_rx set 0
  1798. <6>[ 2764.567585] msm_device_put:device speaker_stereo_rx set 0
  1799. <6>[ 2764.567716] msm_device_put:device speaker_stereo_rx set 1
  1800. <3>[ 2764.577105] msm_device_put:device freq =48000
  1801. <6>[ 2764.596319] aif1 codec rates are already configured, just return
  1802. <6>[ 2769.553196] msm_device_put:device speaker_stereo_rx set 0
  1803. <5>[ 2783.074843] msm_timer_set_next_event(12) clock dg_timer, alarm already expired, now fbf77ed4, alarm fbf77eda, late -6
  1804. <6>[ 2792.603539] msm_device_put:device speaker_stereo_rx set 0
  1805. <6>[ 2792.603591] msm_device_put:device speaker_stereo_rx set 1
  1806. <3>[ 2792.612985] msm_device_put:device freq =48000
  1807. <6>[ 2792.626363] aif1 codec rates are already configured, just return
  1808. <6>[ 2795.883510] msm_device_put:device speaker_stereo_rx set 0
  1809. <4>[ 2796.102368] ------------[ cut here ]------------
  1810. <4>[ 2796.102453] WARNING: at /home/flintman/source/ever/jelly-bt/kernel/hp/tenderloin/arch/arm/kernel/smp.c:555 resched_cpu+0x4c/0x64()
  1811. <4>[ 2796.117429] Modules linked in: ath6kl cfg80211 compat tun ntfs cifs nls_utf8 [last unloaded: ath6kl]
  1812. <4>[ 2796.126597] [<80049680>] (unwind_backtrace+0x0/0x164) from [<800b49fc>] (warn_slowpath_common+0x4c/0x64)
  1813. <4>[ 2796.136116] [<800b49fc>] (warn_slowpath_common+0x4c/0x64) from [<800b4a2c>] (warn_slowpath_null+0x18/0x1c)
  1814. <4>[ 2796.145922] [<800b4a2c>] (warn_slowpath_null+0x18/0x1c) from [<800aa3b8>] (resched_cpu+0x4c/0x64)
  1815. <4>[ 2796.154518] [<800aa3b8>] (resched_cpu+0x4c/0x64) from [<800b0bcc>] (scheduler_tick+0x1e4/0x2dc)
  1816. <4>[ 2796.163379] [<800b0bcc>] (scheduler_tick+0x1e4/0x2dc) from [<800c04a4>] (update_process_times+0x44/0x50)
  1817. <4>[ 2796.172748] [<800c04a4>] (update_process_times+0x44/0x50) from [<800d76d0>] (tick_sched_timer+0x90/0xd0)
  1818. <4>[ 2796.182210] [<800d76d0>] (tick_sched_timer+0x90/0xd0) from [<800cde58>] (__run_hrtimer.isra.10+0x90/0x118)
  1819. <4>[ 2796.192016] [<800cde58>] (__run_hrtimer.isra.10+0x90/0x118) from [<800ce8ec>] (hrtimer_interrupt+0x134/0x2e0)
  1820. <4>[ 2796.201667] [<800ce8ec>] (hrtimer_interrupt+0x134/0x2e0) from [<80052270>] (msm_timer_interrupt+0x34/0x40)
  1821. <4>[ 2796.211562] [<80052270>] (msm_timer_interrupt+0x34/0x40) from [<800eaae8>] (handle_IRQ_event+0x24/0xc0)
  1822. <4>[ 2796.220842] [<800eaae8>] (handle_IRQ_event+0x24/0xc0) from [<800ecd44>] (handle_percpu_irq+0x4c/0x8c)
  1823. <4>[ 2796.229883] [<800ecd44>] (handle_percpu_irq+0x4c/0x8c) from [<80042088>] (asm_do_IRQ+0x88/0xc8)
  1824. <4>[ 2796.238719] [<80042088>] (asm_do_IRQ+0x88/0xc8) from [<80042dc8>] (__irq_usr+0x48/0xe0)
  1825. <4>[ 2796.246687] Exception stack(0xacec7fb0 to 0xacec7ff8)
  1826. <4>[ 2796.251556] 7fa0:                                     001ec271 001ec280 6f703d4d 5f726577
  1827. <4>[ 2796.259720] 7fc0: 484778af 484778af 001ec271 00000053 00000000 484778af 484778b0 001ec270
  1828. <4>[ 2796.267876] 7fe0: 00000000 48477818 2aaf9b29 2aaefb70 600f0030 ffffffff
  1829. <4>[ 2796.274637] ---[ end trace e5b90259ac0b4714 ]---
  1830. <6>[ 2808.142823] msm_device_put:device speaker_stereo_rx set 0
  1831. <6>[ 2808.142874] msm_device_put:device speaker_stereo_rx set 1
  1832. <3>[ 2808.152237] msm_device_put:device freq =48000
  1833. <6>[ 2808.165293] aif1 codec rates are already configured, just return
  1834. <6>[ 2811.433507] msm_device_put:device speaker_stereo_rx set 0
  1835. <6>[ 2834.630969] msm_device_put:device speaker_stereo_rx set 0
  1836. <6>[ 2834.631019] msm_device_put:device speaker_stereo_rx set 1
  1837. <3>[ 2834.640419] msm_device_put:device freq =48000
  1838. <6>[ 2834.653501] aif1 codec rates are already configured, just return
  1839. <6>[ 2837.923567] msm_device_put:device speaker_stereo_rx set 0
  1840. <6>[ 2840.279779] msm_device_put:device speaker_stereo_rx set 0
  1841. <6>[ 2840.279837] msm_device_put:device speaker_stereo_rx set 1
  1842. <3>[ 2840.289275] msm_device_put:device freq =48000
  1843. <6>[ 2840.302112] aif1 codec rates are already configured, just return
  1844. <6>[ 2843.583562] msm_device_put:device speaker_stereo_rx set 0
  1845. <6>[ 2876.213316] msm_device_put:device speaker_stereo_rx set 0
  1846. <6>[ 2876.213365] msm_device_put:device speaker_stereo_rx set 1
  1847. <3>[ 2876.222757] msm_device_put:device freq =48000
  1848. <6>[ 2876.247232] aif1 codec rates are already configured, just return
  1849. <6>[ 2881.793522] msm_device_put:device speaker_stereo_rx set 0
  1850. <6>[ 2892.753781] msm_device_put:device speaker_stereo_rx set 0
  1851. <6>[ 2892.753817] msm_device_put:device speaker_stereo_rx set 1
  1852. <3>[ 2892.753826] msm_device_put:device freq =48000
  1853. <6>[ 2892.779564] aif1 codec rates are already configured, just return
  1854. <6>[ 2896.043111] msm_device_put:device speaker_stereo_rx set 0
  1855. <6>[ 2928.767535] msm_device_put:device speaker_stereo_rx set 0
  1856. <6>[ 2928.767586] msm_device_put:device speaker_stereo_rx set 1
  1857. <3>[ 2928.776976] msm_device_put:device freq =48000
  1858. <6>[ 2928.790225] aif1 codec rates are already configured, just return
  1859. <6>[ 2932.054026] msm_device_put:device speaker_stereo_rx set 0
  1860. <6>[ 2952.184579] msm_device_put:device speaker_stereo_rx set 0
  1861. <6>[ 2952.184630] msm_device_put:device speaker_stereo_rx set 1
  1862. <3>[ 2952.194022] msm_device_put:device freq =48000
  1863. <6>[ 2952.206901] aif1 codec rates are already configured, just return
  1864. <6>[ 2955.498059] msm_device_put:device speaker_stereo_rx set 0
  1865. <6>[ 2972.952697] msm_device_put:device speaker_stereo_rx set 0
  1866. <6>[ 2972.952748] msm_device_put:device speaker_stereo_rx set 1
  1867. <3>[ 2972.962091] msm_device_put:device freq =48000
  1868. <6>[ 2972.975005] aif1 codec rates are already configured, just return
  1869. <6>[ 2976.233112] msm_device_put:device speaker_stereo_rx set 0
  1870. <3>[ 3014.570395] init: untracked pid 17410 exited
  1871. <3>[ 3014.570440] init: untracked pid 17439 exited
  1872. <6>[ 3017.986469] msm_device_put:device speaker_stereo_rx set 0
  1873. <6>[ 3017.986520] msm_device_put:device speaker_stereo_rx set 1
  1874. <3>[ 3017.995919] msm_device_put:device freq =48000
  1875. <6>[ 3018.020964] aif1 codec rates are already configured, just return
  1876. <6>[ 3021.283108] msm_device_put:device speaker_stereo_rx set 0
  1877. <6>[ 3029.233676] msm_device_put:device speaker_stereo_rx set 0
  1878. <6>[ 3029.233727] msm_device_put:device speaker_stereo_rx set 1
  1879. <3>[ 3029.243117] msm_device_put:device freq =48000
  1880. <6>[ 3029.256350] aif1 codec rates are already configured, just return
  1881. <6>[ 3038.773177] msm_device_put:device speaker_stereo_rx set 0
  1882. <6>[ 3039.265799] msm_device_put:device speaker_stereo_rx set 0
  1883. <6>[ 3039.265835] msm_device_put:device speaker_stereo_rx set 1
  1884. <3>[ 3039.265844] msm_device_put:device freq =48000
  1885. <6>[ 3039.291998] aif1 codec rates are already configured, just return
  1886. <6>[ 3047.533217] msm_device_put:device speaker_stereo_rx set 0
  1887. <3>[ 3747.667131] qtaguid: iface_stat: stat_update() lo not found
  1888. <3>[ 3747.667507] qtaguid: iface_stat: stat_update() lo not found
  1889. <3>[ 3747.787740] qtaguid: iface_stat: stat_update() lo not found
  1890. <3>[ 3747.788018] qtaguid: iface_stat: stat_update() lo not found
  1891. <6>[ 3747.877136] msm_release_control: control0
  1892. <6>[ 3747.877169] __msm_release, open count =0
  1893. <6>[ 3747.883759] __msm_release, vfe_release
  1894. <6>[ 3747.887796] __msm_release, free frame pmem region
  1895. <6>[ 3747.892093] __msm_release, free stats pmem region
  1896. <6>[ 3747.897221] __msm_release: draining queue pict
  1897. <6>[ 3747.901467] __msm_release: completed
  1898. <6>[ 3747.904893] msm_release_control: draining queue control
  1899. <6>[ 3747.910146] msm_release_control, completed
  1900. <6>[ 3748.602488] msm_camio_set_perf_lvl: S_INIT rc = 2648926880
  1901. <6>[ 3748.606414] msm_camio_set_perf_lvl: S_PREVIEW rc = 0
  1902. <6>[ 3748.612868] msm_enqueue: queue event new max is 1
  1903. <6>[ 3748.620839] msm_enqueue: queue control new max is 1
  1904. <6>[ 3748.894932] msm_enqueue: queue event new max is 2
  1905. <6>[ 3748.894980] get_pic:MSM_CAM_IOCTL_ABORT_CAPTURE
  1906. <6>[ 3748.910786] vfe31_proc_general: cmdID = STOP
  1907. <3>[ 3748.910823] msm_empty_frame_q: NULL value for g_pmsm
  1908. <6>[ 3748.949021] msm_release_config: config0
  1909. <6>[ 3748.949034] __msm_release, open count =1
  1910. <6>[ 3748.949042] msm_release_config: draining queue event
  1911. <6>[ 3748.949049] msm_release_config, completed
  1912. <6>[ 3748.949167] msm_release_control: control0
  1913. <6>[ 3748.949176] msm_release_control, stop vfe if active
  1914. <6>[ 3748.949186] __msm_release, open count =0
  1915. <6>[ 3748.949193] __msm_release, vfe_release
  1916. <6>[ 3748.949200] vfe31_release, free_irq
  1917. <6>[ 3748.949217] msm_vpe_release: In
  1918. <6>[ 3748.949249] msm_vpe_release: Out
  1919. <6>[ 3748.949387] vfe31_release, msm_camio_disable
  1920. <6>[ 3748.972974] msm_camio_set_perf_lvl: S_EXIT
  1921. <6>[ 3748.992262] __msm_release, s_release
  1922. <6>[ 3749.062059] __msm_release, msm_camio_sensor_clk_off
  1923. <6>[ 3749.066170] __msm_release, free frame pmem region
  1924. <6>[ 3749.066187] __msm_release, free stats pmem region
  1925. <6>[ 3749.066196] __msm_release: draining queue pict
  1926. <6>[ 3749.066207] __msm_release: completed
  1927. <6>[ 3749.066217] msm_release_control: draining queue control
  1928. <6>[ 3749.066225] msm_release_control, completed
  1929. <3>[ 4348.398291] qtaguid: iface_stat: stat_update() lo not found
  1930. <5>[ 4417.284835] msm_timer_set_next_event(12) clock dg_timer, alarm already expired, now 60f2ffdd, alarm 60f2ffe6, late -9 stop printing
  1931. <6>[ 4891.310340] msm_device_put:device speaker_stereo_rx set 0
  1932. <6>[ 4891.310377] msm_device_put:device speaker_stereo_rx set 1
  1933. <3>[ 4891.310386] msm_device_put:device freq =48000
  1934. <6>[ 4891.336501] aif1 codec rates are already configured, just return
  1935. <6>[ 4894.603174] msm_device_put:device speaker_stereo_rx set 0
  1936. <3>[ 4948.962989] qtaguid: iface_stat: stat_update() lo not found
  1937. <6>[ 5173.072928] msm_device_put:device speaker_stereo_rx set 0
  1938. <6>[ 5173.072977] msm_device_put:device speaker_stereo_rx set 1
  1939. <3>[ 5173.082449] msm_device_put:device freq =48000
  1940. <6>[ 5173.095579] aif1 codec rates are already configured, just return
  1941. <6>[ 5176.364032] msm_device_put:device speaker_stereo_rx set 0
  1942. <6>[ 5417.380810] msm_otg_resume: usb exited from low power mode
  1943. <6>[ 5417.612712] gadget_event: source=detected mA=0
  1944. <4>[ 5418.682371] UDC-CHG (2-1-1-2): usb_multi_chg_detect (540) : 10W Adaptor(2000mA)!
  1945. <6>[ 5418.723645] a6_update_connected_ps: ac=1 usb=0 dock=0
  1946. <6>[ 5418.723669] max8903b_current_setup: CURRENT_750(4), 900(5), 1000(6), 1400(7), 2000MA(9): 9
  1947. <6>[ 5418.735891] gadget_event: source=charger mA=2000
  1948. <6>[ 5418.963155] msm_otg_suspend: usb in low power mode
  1949. <3>[ 5549.562725] qtaguid: iface_stat: stat_update() lo not found
  1950. <6>[ 5559.017635] msm_device_put:device speaker_stereo_rx set 0
  1951. <6>[ 5559.017686] msm_device_put:device speaker_stereo_rx set 1
  1952. <3>[ 5559.027082] msm_device_put:device freq =48000
  1953. <6>[ 5559.039907] aif1 codec rates are already configured, just return
  1954. <3>[ 5560.433463] binder: release proc 17576, transaction 574501, not freed
  1955. <6>[ 5562.304002] msm_device_put:device speaker_stereo_rx set 0
  1956.  
  1957.  
  1958. ------ LAST KMSG (/proc/last_kmsg) ------
  1959. *** /proc/last_kmsg: No such file or directory
  1960.  
  1961. Broadcasting: Intent { act=com.evervolv.toolbox.action.DUMPLOGCAT_FINISHED (has extras) }
  1962. Broadcast completed: result=0
  1963.  

Reply to "Logcat: ev_tenderloin-testing-2014.01.29"

Here you can reply to the paste above

Powered by Stikked