Evervolv Paste

Logcat: ev_tenderloin-nightly-2014.11.22

From EVLogcat Uploader, 10 Years ago, written in Plain Text, viewed 705 times.
URL http://paste.evervolv.com/view/1b8aaa0f Embed
Download Paste or View Raw
  1. ------ LAST KMSG (/proc/last_klog) ------
  2. platform_init_mmu_mappings: entry
  3. platform_init_mmu_mappings:57: mapping shared ram as uncached at 0x40000000
  4. platform_init_mmu_mappings: exit
  5. platform_init_timer: entry
  6. platform_init_timer: exit
  7. platform_set_periodic_timer:39: cb 0x4010c6bd, arg 0x0, interval 10
  8. ******************************************
  9. * Welcome to bootie!
  10. *   Version: 468
  11. ******************************************
  12. mmch_init: entry
  13. mmch_init: exit
  14. usbc: initialized (rc=0)
  15. target_init_buttonscan: entry
  16. target_init_board_id: emu=0, product=0x1, hwbuild=1
  17. boardtype=topaz-Wifi-pvt
  18. Memory bank 0 -> address: 0x40200000-0x46700000 size:0x06500000
  19. Memory bank 1 -> address: 0x48000000-0x7ff00000 size:0x37F00000
  20. i2c_init: Register GSBI 3 as i2c bus 0
  21. i2c_init_clock: The i2c clock rate is 19200000
  22. i2c_init: Register GSBI 4 as i2c bus 1
  23. i2c_init_clock: The i2c clock rate is 19200000
  24. i2c_init: Register GSBI 9 as i2c bus 2
  25. i2c_init_clock: The i2c clock rate is 19200000
  26. i2c_init: Register GSBI 8 as i2c bus 3
  27. i2c_init_clock: The i2c clock rate is 19200000
  28. i2c_init: Register GSBI 7 as i2c bus 4
  29. i2c_init_clock: The i2c clock rate is 19200000
  30. a6_init_sbw_pins: TCK: 157, TDIO; 158, WKUP: 155
  31. max8903b_gpio_init
  32. Starting battery authentication...
  33. Battery auth succeeded
  34. sys_init: entry
  35. Wall message(Boot reason) = 0x6f656d44 ("reboot")
  36. sys_init: booted because 'reboot'
  37. mmch_reset: entry
  38. Bus(0) Primecell ID regs:
  39. 0x80 0x11 0x4 0x0
  40. 0xd 0xf0 0x5 0xb1
  41. sdc1_clk_set 400000
  42. mmch_set_active:727: bus 0, active 1
  43. sdc1_clk_set 400000
  44. mmch_reset: exit
  45. mmch_set_active:727: bus 0, active 1
  46. sdc1_clk_set 400000
  47. cid: 0x2010053 0x454d3332 0x47903034 0xc27a4ea4
  48.         mfg id: 0x2
  49.         oem id: 0x100
  50.         name: 'SEM32G'
  51.         rev: 0x90
  52.         sn: 0x3034c27a
  53.         date: 4.2011
  54. sdc1_clk_set 50000000
  55. token section is 4096 bytes long
  56. target_check_boot_condition: entry
  57. Wall message(Boot reason) = 0x6f656d44 ("reboot")
  58. display_init: displayWidth: 1024, displayHeight: 768
  59. Wall message(Boot reason) = 0x6f656d44 ("reboot")
  60. p=100 ca=5198400 v=4138240 i=-609218
  61. autobooting with 'fsboot' command
  62. loading file '/boot/uImage' to address 0x41000000
  63. parse_uimage:241: uimage 0x41000000
  64. <6>[    0.000000] Booting Linux on physical CPU 0
  65. <6>[    0.000000] Initializing cgroup subsys cpu
  66. <5>[    0.000000] Linux version 3.4.82-tenderloin+ (ev_nightlies@evervolv.codefi.re) (gcc version 4.7 (GCC) ) #1 SMP PREEMPT Sat Nov 22 06:38:42 PST 2014
  67. <1>[    0.000000] CPU: ARMv7 Processor [510f02d2] revision 2 (ARMv7), cr=10c5387d
  68. <1>[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIVT ASID tagged instruction cache
  69. <1>[    0.000000] Machine: tenderloin
  70. <6>[    0.000000] memory pool 3 (start 76400000 size 9200000) initialized
  71. <1>[    0.000000] Memory policy: ECC disabled, Data cache writealloc
  72. <3>[    0.000000] smem_find(137, 80): wrong size 64
  73. <3>[    0.000000] smem_find(137, 72): wrong size 64
  74. <6>[    0.000000] socinfo_init: v5, id=86, ver=2.0, raw_id=1696, raw_ver=1696, hw_plat=0,  hw_plat_ver=65536
  75. <6>[    0.000000]  accessory_chip=0
  76. <7>[    0.000000] On node 0 totalpages: 215296
  77. <7>[    0.000000] free_area_init_node: node 0, pgdat 809c0600, node_mem_map 80c54000
  78. <7>[    0.000000]   Normal zone: 2024 pages used for memmap
  79. <7>[    0.000000]   Normal zone: 0 pages reserved
  80. <7>[    0.000000]   Normal zone: 213272 pages, LIFO batch:31
  81. <6>[    0.000000] passing from bootie 9437184 bytes at 7f600000 physical for fb
  82. <6>[    0.000000] PERCPU: Embedded 6 pages/cpu @81449000 s12096 r0 d12480 u32768
  83. <7>[    0.000000] pcpu-alloc: s12096 r0 d12480 u32768 alloc=8*4096
  84. <7>[    0.000000] pcpu-alloc: [0] 0 [0] 1
  85. <1>[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 213272
  86. <5>[    0.000000] Kernel command line: root=/dev/ram0 rootwait ro fbcon=disable console=ttyS0,115200n8 androidboot.serialno=QRKGO0AMV2LFN3HDFKCKF9PDNKMIOVSV  fb=0x7f600000 nduid=a73588182bf54d7774c6f823af25e679a598f3ff klog=0x7ff00000 klog_len=0x100000 boardtype=topaz-Wifi-pvt lastboot=reboot
  87. <6>[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
  88. <6>[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  89. <6>[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  90. <6>[    0.000000] Memory: 101MB 740MB = 841MB total
  91. <5>[    0.000000] Memory: 839364k/839364k available, 171324k reserved, 0K highmem
  92. <5>[    0.000000] Virtual kernel memory layout:
  93. <5>[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
  94. <5>[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
  95. <5>[    0.000000]     vmalloc : 0xbf800000 - 0xff000000   (1016 MB)
  96. <5>[    0.000000]     lowmem  : 0x80000000 - 0xbf400000   (1012 MB)
  97. <5>[    0.000000]     pkmap   : 0x7fe00000 - 0x80000000   (   2 MB)
  98. <5>[    0.000000]       .text : 0x80008000 - 0x808d1b3c   (8999 kB)
  99. <5>[    0.000000]       .init : 0x808d2000 - 0x80915f40   ( 272 kB)
  100. <5>[    0.000000]       .data : 0x80916000 - 0x809df4b0   ( 806 kB)
  101. <5>[    0.000000]        .bss : 0x809df4d4 - 0x80c4f8e8   (2498 kB)
  102. <6>[    0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
  103. <6>[    0.000000] Preemptible hierarchical RCU implementation.
  104. <6>[    0.000000] NR_IRQS:855
  105. <6>[    0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms
  106. <6>[    0.000000] Switching to timer-based delay loop
  107. <7>[    0.000000] ODEBUG: 2 of 2 active objects replaced
  108. <6>[    0.001922] Calibrating delay loop (skipped), value calculated using timer frequency.. 13.50 BogoMIPS (lpj=67500)
  109. <6>[    0.001953] pid_max: default: 32768 minimum: 301
  110. <6>[    0.002258] Security Framework initialized
  111. <6>[    0.002288] SELinux:  Initializing.
  112. <7>[    0.002380] SELinux:  Starting in permissive mode
  113. <6>[    0.002502] Mount-cache hash table entries: 512
  114. <6>[    0.004272] Initializing cgroup subsys cpuacct
  115. <6>[    0.004302] Initializing cgroup subsys freezer
  116. <6>[    0.004364] CPU: Testing write buffer coherency: ok
  117. <6>[    0.004669] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  118. <6>[    0.004699] hw perfevents: enabled with ARMv7 Scorpion-MP PMU driver, 5 counters available
  119. <6>[    0.004852] Setting up static identity map for 0x408800c8 - 0x4088012c
  120. <6>[    0.036804] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  121. <6>[    0.036956] Brought up 2 CPUs
  122. <6>[    0.036987] SMP: Total of 2 processors activated (27.00 BogoMIPS).
  123. <6>[    0.056945] dummy:
  124. <6>[    0.057586] NET: Registered protocol family 16
  125. <6>[    0.058624] DMA: preallocated 256 KiB pool for atomic coherent allocations
  126. <3>[    0.058837] AXI: msm_bus_fabric_init_driver(): msm_bus_fabric_init_driver
  127. <6>[    0.060180] meminfo_init: smem ram ptable found: ver: 0 len: 7
  128. <6>[    0.060211] Found 2 memory banks grouped into 16 memory regions
  129. <6>[    0.060516] gpiochip_add: registered GPIOs 0 to 172 on device: msmgpio
  130. <6>[    0.061614] msm_tsens_early_init: done
  131. <6>[    0.061645] msm_rpm_init: RPM firmware 2.0.67653
  132. <1>[    0.061828] Choosing tenderloin_pins_wifi
  133. <3>[    0.093994] msm_rpm_get_status(): Status id 433 not defined for target
  134. <3>[    0.123535] tenderloin_init_gpiomux: >= TOPAZ_DVT
  135. <6>[    0.124938] saw_probe: id=0, name=8901_s0
  136. <6>[    0.125549] saw_probe: id=1, name=8901_s1
  137. <6>[    0.132843] pm8058_probe: PMIC revision: E3
  138. <6>[    0.135131] gpiochip_add: registered GPIOs 173 to 212 on device: pm-gpio
  139. <6>[    0.135589] pm_gpio_probe: OK: base=173, ngpio=40
  140. <6>[    0.135955] gpiochip_add: registered GPIOs 213 to 224 on device: pm8xxx-mpp
  141. <6>[    0.136047] pm8xxx_mpp_probe: OK: base=213, ngpio=12
  142. <6>[    0.139038] pm8901_probe: PMIC revision reg: F4
  143. <6>[    0.139038] pm8901_probe: PMIC version: PM8901 rev 2.1
  144. <6>[    0.140014] gpiochip_add: registered GPIOs 225 to 228 on device: pm8xxx-mpp
  145. <6>[    0.140045] pm8xxx_mpp_probe: OK: base=225, ngpio=4
  146. <3>[    0.145446] Registering a6_0 device.
  147. <3>[    0.145507] Registering a6_1 device.
  148. <7>[    0.147064] tenderloin_init_keypad
  149. <3>[    0.147399] tenderloin_init: --
  150. <6>[    0.147430] hw-breakpoint: found 3 (+1 reserved) breakpoint and 1 watchpoint registers.
  151. <6>[    0.147460] hw-breakpoint: maximum watchpoint size is 8 bytes.
  152. <6>[    0.191589] bio: create slab <bio-0> at 0
  153. <7>[    0.193084] reg-fixed-voltage reg-fixed-voltage.0: vdd50_boost supplying 5000000uV
  154. <6>[    0.195251] ION heap vmalloc created
  155. <6>[    0.195373] ION heap mm created at 38200000 with size 6600000
  156. <6>[    0.195404] ION heap mm_fw created at 38000000 with size 200000
  157. <6>[    0.195495] ION heap mfc created at 3e800000 with size 2000
  158. <6>[    0.195770] ION heap sf created at 76401000 with size 4000000
  159. <6>[    0.196044] ION heap camera_preview created at 7a401000 with size 4200000
  160. <6>[    0.196136] ION heap audio created at 7e601000 with size 4cf000
  161. <5>[    0.196411] pmic8058_pwm_probe: OK
  162. <6>[    0.196533] klog_init: phys buffer at 0x7ff00000
  163. <6>[    0.196624] klog_init: virt address at 0xbfe00000
  164. <6>[    0.196655] klog_init: found valid klog, len 1048576
  165. <6>klog_init: using buffer 1 at 0xbfe40018, length 262116
  166. <6>klog_init: last_klog head=51889 tail=0 size=51889
  167. <6>klog_init: last_klog2 head=20457 tail=0 size=20457
  168. <6>klog_init: last_klog3 head=30556 tail=0 size=30556
  169. <5>SCSI subsystem initialized
  170. <6>usbcore: registered new interface driver usbfs
  171. <6>usbcore: registered new interface driver hub
  172. <6>usbcore: registered new device driver usb
  173. <6>input: pmic8xxx_pwrkey as /devices/platform/msm_ssbi.0/pm8058-core/pm8xxx-pwrkey/input/input0
  174. <6>Advanced Linux Sound Architecture Driver Version 1.0.25.
  175. <6>Bluetooth: Core ver 2.16
  176. <6>NET: Registered protocol family 31
  177. <6>Bluetooth: HCI device and connection manager initialized
  178. <6>Bluetooth: HCI socket layer initialized
  179. <6>Bluetooth: L2CAP socket layer initialized
  180. <6>Bluetooth: SCO socket layer initialized
  181. <6>cfg80211: Calling CRDA to update world regulatory domain
  182. <6>Switching to clocksource gp_timer
  183. <6>NET: Registered protocol family 2
  184. <6>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
  185. <6>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
  186. <6>TCP bind hash table entries: 65536 (order: 8, 1310720 bytes)
  187. <6>TCP: Hash tables configured (established 131072 bind 65536)
  188. <6>TCP: reno registered
  189. <6>UDP hash table entries: 512 (order: 2, 24576 bytes)
  190. <6>UDP-Lite hash table entries: 512 (order: 2, 24576 bytes)
  191. <6>NET: Registered protocol family 1
  192. <6>RPC: Registered named UNIX socket transport module.
  193. <6>RPC: Registered udp transport module.
  194. <6>RPC: Registered tcp transport module.
  195. <6>RPC: Registered tcp NFSv4.1 backchannel transport module.
  196. <6>Trying to unpack rootfs image as initramfs...
  197. <6>Freeing initrd memory: 376K
  198. <6>Detected 5 counters on the L2CC PMU.
  199. <6>pil_qdsp6v3 pil_qdsp6v3: using non-secure boot
  200. <3>smd_channel_probe_worker: allocation table not initialized
  201. <6>snddev_icodec_probe: msm_codec_i2s_slave_mode = 0
  202. <4>8058_s4: Failed to create debugfs directory
  203. <6>dspcrashd_probe: Platform driver values: Base = 0x46700000, Size = 0x2000000,pdata = 0xdeaddead
  204. <6>Max ACPU freq: 1512000 KHz
  205. <4>8901_s0: Failed to create debugfs directory
  206. <4>8901_s1: Failed to create debugfs directory
  207. <6>CPU0: 23 scaling frequencies supported.
  208. <6>CPU1: 23 scaling frequencies supported.
  209. <6>audit: initializing netlink socket (disabled)
  210. <5>type=2000 audit(0.240:1): initialized
  211. <6>NTFS driver 2.1.30 [Flags: R/W].
  212. <6>fuse init (API version 7.18)
  213. <6>msgmni has been set to 1640
  214. <7>SELinux:  Registering netfilter hooks
  215. <6>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
  216. <6>io scheduler noop registered
  217. <6>io scheduler deadline registered
  218. <6>io scheduler row registered (default)
  219. <6>io scheduler cfq registered
  220. <6>
  221.  msm_vidc_enc: Inside vid_enc_init()<6>
  222.  msm_vidc_enc: Inside vid_enc_vcd_init()<6>msm_serial_hs module loaded
  223. <6>[BT]msm_serial_hs module loaded
  224. <6>msm_serial_hsl: detected port #0
  225. <6>msm_serial_hsl.0: ttyHSL0 at MMIO 0x19c40000 (irq = 227) is a MSM
  226. <6>msm_serial_hsl: driver initialized
  227. <6>msm_rotator_probe: rotator_hw_revision=1
  228. <6>kgsl kgsl-3d0: |kgsl_gpummu_init| MMU type set for device is GPUMMU
  229. <6>kgsl kgsl-2d0: |kgsl_gpummu_init| MMU type set for device is GPUMMU
  230. <6>kgsl kgsl-2d1: |kgsl_gpummu_init| MMU type set for device is GPUMMU
  231. <6>brd: module loaded
  232. <6>loop: module loaded
  233. <6>lkdtm: No crash points registered, enable through debugfs
  234. <6>pmem: Initializing pmem_adsp as non-cached
  235. <3>pmem: Cannot allocate from reserved memory for pmem_adsp
  236. <4>android_pmem: probe of android_pmem.2 failed with error -1
  237. <6>pmem: Initializing pmem_audio as non-cached
  238. <6>allocating 5042176 bytes at 7ead0000 physical for pmem_audio
  239. <4>8058_l18: Failed to create debugfs directory
  240. <6>Before a6 call to i2c_add_driver.
  241. <3>a6_init_state: enabling A6 internal wake.
  242. <3>a6_init_state: TS2_I2C_WAKEUP_PERIOD = 0x1b
  243. <6>A6 Version: HW: 255, FW (M.m.B): 2.13.25, ManID: 28769, ProdTyp: 1281
  244. <5>A6 driver initialized successfully!
  245. <3>a6_init_state: enabling A6 internal wake.
  246. <3>a6_init_state: TS2_I2C_WAKEUP_PERIOD = 0x1b
  247. <6>A6 Version: HW: 255, FW (M.m.B): 2.7.29, ManID: 28769, ProdTyp: 1793
  248. <5>A6 driver initialized successfully!
  249. <4>i2c-core: driver [a6] using legacy suspend method
  250. <4>i2c-core: driver [a6] using legacy resume method
  251. <6>nduid: a73588182bf54d7774c6f823af25e679a598f3ff
  252. <3>hsuart_rxtx_lists_init: init 80b3eae4
  253. <3>hsuart_rxtx_lists_init: init 80b3eb18
  254. hsuart_tty:created 'ttyHS0' device on UART 0
  255. mdmgpio_init
  256. mdmgpio_probe
  257. <3>msm_wm8958_setup_power: codec power setup
  258. <4>vdd50_boost: Failed to create debugfs directory
  259. <4>8058_s3: Failed to create debugfs directory
  260. <3>wm8994_ldo_power: Power up the WM8994 LDOs
  261. <6>wm8994 4-001a: WM8958 revision B
  262. <4>wm8994 4-001a: No interrupt specified, no interrupts
  263. <7>gpiochip_find_base: found new base at 501
  264. <6>gpiochip_add: registered GPIOs 501 to 511 on device: wm8994
  265. <6>SCSI Media Changer driver v0.25
  266. <6>tun: Universal TUN/TAP device driver, 1.6
  267. <6>tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  268. <6>PPP generic driver version 2.4.2
  269. <6>PPP BSD Compression module registered
  270. <6>PPP Deflate Compression module registered
  271. <6>PPP MPPE Compression module registered
  272. <6>NET: Registered protocol family 24
  273. <6>SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
  274. <6>CSLIP: code copyright 1989 Regents of the University of California.
  275. <3>board_sdio_wifi_enable
  276. <4>8058_s3: Failed to create debugfs directory
  277. <4>8901_l3: Failed to create debugfs directory
  278. <4>8901_l1: Failed to create debugfs directory
  279. <4>8058_l19: Failed to create debugfs directory
  280. <6>wifi_power(1) 1.8V sdio: set load
  281. <6>tenderloin_wifi_power: New regulator mode for 8058_s3: 2
  282. <6>wifi_power(1) 3.3V
  283. <6>wifi_power(1) 8901_l1 3.3V
  284. <6>wifi_power(1) 8058_l19 1.8V
  285. wifi_power(1) CHIP_PWD
  286. <4>8058_s1: Failed to create debugfs directory
  287. <4>8058_l6: Failed to create debugfs directory
  288. <4>8058_l7: Failed to create debugfs directory
  289. <6>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  290. <3>Rate 2147483647 for jpegd_clk is greater than highest Fmax
  291. <6>host driver registered w/ tranceiver
  292. <6>usbcore: registered new interface driver cdc_acm
  293. <6>cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
  294. <6>usbcore: registered new interface driver cdc_wdm
  295. <6>Initializing USB Mass Storage driver...
  296. <6>usbcore: registered new interface driver usb-storage
  297. <6>USB Mass Storage support registered.
  298. <6>usbcore: registered new interface driver ums-alauda
  299. <6>usbcore: registered new interface driver ums-cypress
  300. <6>usbcore: registered new interface driver ums-datafab
  301. <6>usbcore: registered new interface driver ums-freecom
  302. <6>usbcore: registered new interface driver ums-isd200
  303. <6>usbcore: registered new interface driver ums-jumpshot
  304. <6>usbcore: registered new interface driver ums-karma
  305. <6>usbcore: registered new interface driver ums-onetouch
  306. <6>usbcore: registered new interface driver ums-sddr09
  307. <6>usbcore: registered new interface driver ums-sddr55
  308. <6>usbcore: registered new interface driver ums-usbat
  309. <6>usbcore: registered new interface driver usbserial
  310. <6>usbserial: USB Serial Driver core
  311. <6>usbcore: registered new interface driver usb_ehset_test
  312. <6>peripheral driver registered w/ tranceiver
  313. <6>mbim_init: initialize 1 instances
  314. <6>mbim_init: Initialized 1 ports
  315. <6>rndis_qc_init: initialize rndis QC instance
  316. <6>android_usb gadget: Mass Storage Function, version: 2009/09/11
  317. <6>android_usb gadget: Number of LUNs=1
  318. <6> lun0: LUN: removable file: (no medium)
  319. <6>android_usb gadget: android_usb ready
  320. <4>8058_l10: Failed to create debugfs directory
  321. <4>vdd50_boost: Failed to create debugfs directory
  322. <6>GPIO Input Driver: Start gpio inputs for tenderloin-keypad in interrupt mode
  323. <3>ulpi_read: timeout 48300000
  324. <6>gpio_keys_scan_keys: key 1-73, 0 (103) changed to 0
  325. <6>gpio_keys_scan_keys: key 1-72, 1 (104) changed to 0
  326. <6>gpio_keys_scan_keys: key 1-ac, 2 (40) changed to 0
  327. <6>input: tenderloin-keypad as /devices/virtual/input/input1
  328. <6>i2c i2c-0: mpu3050: +lsm303dlha
  329. <6>i2c i2c-0: mpu3050: +lsm303dlhm
  330. <4>i2c i2c-0: WARNING: Compass irq not assigned
  331. <4>i2c i2c-0: mpu3050: No Pressure Present
  332. <4>ODEBUG: object is on stack, but not annotated
  333. <4>------------[ cut here ]------------
  334. <4>WARNING: at ../../../../../../kernel/htc/msm8960/lib/debugobjects.c:302 __debug_object_init+0x2b0/0x36c()
  335. [<80014c60>] (unwind_backtrace+0x0/0x11c) from [<80078188>] (warn_slowpath_common+0x48/0x60)
  336. [<80078188>] (warn_slowpath_common+0x48/0x60) from [<80078258>] (warn_slowpath_null+0x18/0x1c)
  337. [<80078258>] (warn_slowpath_null+0x18/0x1c) from [<8027be10>] (__debug_object_init+0x2b0/0x36c)
  338. [<8027be10>] (__debug_object_init+0x2b0/0x36c) from [<80095758>] (hrtimer_init+0x18/0x30)
  339. [<80095758>] (hrtimer_init+0x18/0x30) from [<80082ae4>] (do_nsleep+0x2c/0xf0)
  340. [<80082ae4>] (do_nsleep+0x2c/0xf0) from [<80083f84>] (hr_msleep+0x14/0x1c)
  341. [<80083f84>] (hr_msleep+0x14/0x1c) from [<8041032c>] (MLDLPowerMgmtMPU+0x19c/0x4c4)
  342. [<8041032c>] (MLDLPowerMgmtMPU+0x19c/0x4c4) from [<80411b20>] (mpu3050_open+0xa4/0x4bc)
  343. [<80411b20>] (mpu3050_open+0xa4/0x4bc) from [<8040e45c>] (mpu3050_probe+0x3a0/0x6c8)
  344. [<8040e45c>] (mpu3050_probe+0x3a0/0x6c8) from [<8041b784>] (i2c_device_probe+0x98/0xc8)
  345. [<8041b784>] (i2c_device_probe+0x98/0xc8) from [<8031f228>] (driver_probe_device+0x138/0x33c)
  346. [<8031f228>] (driver_probe_device+0x138/0x33c) from [<8031f494>] (__driver_attach+0x68/0x8c)
  347. [<8031f494>] (__driver_attach+0x68/0x8c) from [<8031d9d8>] (bus_for_each_dev+0x50/0x88)
  348. [<8031d9d8>] (bus_for_each_dev+0x50/0x88) from [<8031e1a0>] (bus_add_driver+0xf0/0x25c)
  349. [<8031e1a0>] (bus_add_driver+0xf0/0x25c) from [<8031fc54>] (driver_register+0x9c/0x120)
  350. [<8031fc54>] (driver_register+0x9c/0x120) from [<8041c54c>] (i2c_register_driver+0xac/0xd8)
  351. [<8041c54c>] (i2c_register_driver+0xac/0xd8) from [<808f5264>] (mpu_init+0x10/0x60)
  352. [<808f5264>] (mpu_init+0x10/0x60) from [<808d2b04>] (do_one_initcall+0x90/0x160)
  353. [<808d2b04>] (do_one_initcall+0x90/0x160) from [<808d2cc8>] (kernel_init+0xf4/0x1b8)
  354. [<808d2cc8>] (kernel_init+0xf4/0x1b8) from [<8000f5f4>] (kernel_thread_exit+0x0/0x8)
  355. <4>---[ end trace 8e42374ae981ba94 ]---
  356. <6>i2c i2c-0: Installing irq using 381
  357. <6>i2c i2c-0: Module Param interface = mpuirq
  358. <4>i2c-core: driver [mpu3050] using legacy suspend method
  359. <4>i2c-core: driver [mpu3050] using legacy resume method
  360. <7>mpu_init
  361. <6><6>lsm303dlh magnetometer driver
  362. <3>lsm303dlh_mag_sysfs: probe start
  363. <6>input: lsm303dlh_mag_sysfs as /devices/i2c-0/0-001e/input/input2
  364. <6>lsm303dlh_mag_sysfs 0-001e: lsm303dlh_mag probed
  365. <7>lsm303dlh_acc_sysfs accelerometer driver: init
  366. <6>lsm303dlh_acc_sysfs: probe start.
  367. <6>lsm303dlh_acc_sysfs: hw init start
  368. <6>lsm303dlh_acc_sysfs: hw init done
  369. <6>input: lsm303dlh_acc_sysfs as /devices/i2c-0/0-0018/input/input3
  370. <6>lsm303dlh_acc_sysfs 0-0018: lsm303dlh_acc_sysfs: probed
  371. <4>i2c-core: driver [lsm303dlh_acc_sysfs] using legacy suspend method
  372. <4>i2c-core: driver [lsm303dlh_acc_sysfs] using legacy resume method
  373. <4>------------[ cut here ]------------
  374. <4>WARNING: at ../../../../../../kernel/htc/msm8960/lib/debugobjects.c:262 debug_print_object+0x94/0xbc()
  375. <3>ODEBUG: assert_init not available (active state 0) object type: timer_list hint: stub_timer+0x0/0x10
  376. [<80014c60>] (unwind_backtrace+0x0/0x11c) from [<80078188>] (warn_slowpath_common+0x48/0x60)
  377. [<80078188>] (warn_slowpath_common+0x48/0x60) from [<800781f8>] (warn_slowpath_fmt+0x2c/0x3c)
  378. [<800781f8>] (warn_slowpath_fmt+0x2c/0x3c) from [<8027ba80>] (debug_print_object+0x94/0xbc)
  379. [<8027ba80>] (debug_print_object+0x94/0xbc) from [<8027c3b4>] (debug_object_assert_init+0xac/0xd4)
  380. [<8027c3b4>] (debug_object_assert_init+0xac/0xd4) from [<800837c8>] (del_timer+0x14/0xb4)
  381. [<800837c8>] (del_timer+0x14/0xb4) from [<8008cda0>] (__cancel_work_timer+0x20/0x10c)
  382. [<8008cda0>] (__cancel_work_timer+0x20/0x10c) from [<80415cf0>] (isl29023_set_power_state+0x70/0x78)
  383. [<80415cf0>] (isl29023_set_power_state+0x70/0x78) from [<8066f72c>] (isl29023_probe+0x188/0x370)
  384. [<8066f72c>] (isl29023_probe+0x188/0x370) from [<8041b784>] (i2c_device_probe+0x98/0xc8)
  385. [<8041b784>] (i2c_device_probe+0x98/0xc8) from [<8031f228>] (driver_probe_device+0x138/0x33c)
  386. [<8031f228>] (driver_probe_device+0x138/0x33c) from [<8031f494>] (__driver_attach+0x68/0x8c)
  387. [<8031f494>] (__driver_attach+0x68/0x8c) from [<8031d9d8>] (bus_for_each_dev+0x50/0x88)
  388. [<8031d9d8>] (bus_for_each_dev+0x50/0x88) from [<8031e1a0>] (bus_add_driver+0xf0/0x25c)
  389. [<8031e1a0>] (bus_add_driver+0xf0/0x25c) from [<8031fc54>] (driver_register+0x9c/0x120)
  390. [<8031fc54>] (driver_register+0x9c/0x120) from [<8041c54c>] (i2c_register_driver+0xac/0xd8)
  391. [<8041c54c>] (i2c_register_driver+0xac/0xd8) from [<808d2b04>] (do_one_initcall+0x90/0x160)
  392. [<808d2b04>] (do_one_initcall+0x90/0x160) from [<808d2cc8>] (kernel_init+0xf4/0x1b8)
  393. [<808d2cc8>] (kernel_init+0xf4/0x1b8) from [<8000f5f4>] (kernel_thread_exit+0x0/0x8)
  394. <4>---[ end trace 8e42374ae981ba95 ]---
  395. <6>input: isl29023 light sensor as /devices/virtual/input/input4
  396. isl29023 input_dev success
  397. <6>isl29023 0-0044: driver version 1.0 enabled
  398. <4>i2c-core: driver [isl29023] using legacy suspend method
  399. <4>i2c-core: driver [isl29023] using legacy resume method
  400. <6>using rtc device, pm8xxx_rtc, for alarms<6>rtc-pm8xxx rtc-pm8xxx: rtc core: registered pm8xxx_rtc as rtc0
  401. <6>i2c /dev entries driver
  402. <6>lirc_dev: IR Remote Control driver registered, major 240
  403. <6>IR RC5 (streamzap) protocol handler initialized
  404. <6>IR SANYO protocol handler initialized
  405. <6>IR MCE Keyboard/mouse protocol handler initialized
  406. <6>IR LIRC bridge handler initialized
  407. <6>Linux video capture interface: v2.00
  408. +++ config_camera_on_gpios_web_cam_mt9m113
  409. <4>8058_lvs0: Failed to create debugfs directory
  410. config_camera_on_gpios_web_cam_mt9m113:enable the regulator votg_lvs0 succeed
  411. <4>8058_l11: Failed to create debugfs directory
  412. config_camera_on_gpios_web_cam_mt9m113:enable the regulator votg_vreg_l11 succeed
  413. --- config_camera_on_gpios_web_cam_mt9m113
  414. <4>fs_vfe: Failed to create debugfs directory
  415. <3>ulpi_read: timeout 48300000
  416. +++ config_camera_off_gpios_web_cam_mt9m113
  417. config_camera_off_gpios_web_cam_mt9m113:disable the regulator: votg_lvs0 succeed
  418. config_camera_off_gpios_web_cam_mt9m113:disable the regulator: votg_vreg_l11 succeed
  419. --- config_camera_off_gpios_web_cam_mt9m113
  420. <6>msm_sync_init: initialized mt9m113
  421. <6>max8903b driver registeration! rc = 0
  422. <6>msm_adc successfully registered
  423. <5>tsens_tm_init: OK
  424. <6>device-mapper: uevent: version 1.0.3
  425. <6>device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
  426. <6>device-mapper: multipath: version 1.3.0 loaded
  427. <6>device-mapper: multipath round-robin: version 1.0.0 loaded
  428. <6>device-mapper: multipath queue-length: version 0.1.0 loaded
  429. <6>device-mapper: multipath service-time: version 0.2.0 loaded
  430. <6>cpuidle: using governor ladder
  431. <6>cpuidle: using governor menu
  432. <6>mmc0: SDCC Version: 0x00000000
  433. <3>mmc0: No card detect facilities available
  434. <4>8901_l5: Failed to create debugfs directory
  435. <4>8901_lvs0: Failed to create debugfs directory
  436. <6>mmc0: Qualcomm MSM SDCC-core at 0x0000000012400000 irq 136,0 dma 18 dmacrcri 1
  437. <6>mmc0: Controller capabilities: 0x00000001
  438. <6>mmc0: 8 bit data mode enabled
  439. <6>mmc0: 4 bit data mode disabled
  440. <6>mmc0: polling status mode disabled
  441. <6>mmc0: MMC clock 400000 -> 48000000 Hz, PCLK 0 Hz
  442. <6>mmc0: Slot eject status = 0
  443. <6>mmc0: Power save feature enable = 1
  444. <6>mmc0: DM non-cached buffer at bf8e6000, dma_addr 0x74860000
  445. <6>mmc0: DM cmd busaddr 0x74860000, cmdptr busaddr 0x74877f40
  446. <6>mmc1: SDCC Version: 0x00000000
  447. <3>mmc1: No card detect facilities available
  448. <4>8058_s3: Failed to create debugfs directory
  449. <6>mmc1: Qualcomm MSM SDCC-core at 0x00000000121c0000 irq 133,0 dma 21 dmacrcri 5
  450. <6>mmc1: Controller capabilities: 0x00000001
  451. <6>mmc1: 8 bit data mode disabled
  452. <6>mmc1: 4 bit data mode enabled
  453. <6>mmc1: polling status mode disabled
  454. <6>mmc1: MMC clock 400000 -> 48000000 Hz, PCLK 0 Hz
  455. <6>mmc1: Slot eject status = 0
  456. <6>mmc1: Power save feature enable = 1
  457. <6>mmc1: DM non-cached buffer at bfb01000, dma_addr 0x74880000
  458. <6>mmc1: DM cmd busaddr 0x74880000, cmdptr busaddr 0x74897f40
  459. tenderloin_probe_wifi: id 4 mmc b4648000
  460. <3>board_sdio_wifi_enable
  461. <7>LM8502 module init called
  462. <7>LM8502 probe called
  463. <3>ulpi_read: timeout 48300000
  464. <3>ulpi_read: timeout 48300000
  465. <6>mmc0: disabling BKOPS
  466. <6>mmc0: new high speed MMC card at address 0001
  467. <6>mmcblk0: mmc0:0001 SEM32G 29.7 GiB
  468. <3>qup_i2c qup_i2c.3: QUP: I2C status flags :0x1343c8, irq:193
  469. <3>qup_i2c qup_i2c.3: I2C slave addr:0x33 not connected
  470. <3>Unable to read LM8502 registers
  471. <6> mmcblk0: p1 p2 p3 p4 < p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 >
  472. <7>Registered led device: core_navi_left
  473. <7>Registered led device: core_navi_right
  474. <4>i2c-core: driver [LM8502] using legacy suspend method
  475. <4>i2c-core: driver [LM8502] using legacy resume method
  476. <6>usbcore: registered new interface driver usbhid
  477. <6>usbhid: USB HID core driver
  478. <6>ashmem: initialized
  479. <6>logger: created 256K log 'log_main'
  480. <6>logger: created 256K log 'log_events'
  481. <6>logger: created 256K log 'log_radio'
  482. <6>logger: created 256K log 'log_system'
  483. <6>msm-cpu-dai msm-cpu-dai.0: asoc_msm_cpu_probe: dev name msm-cpu-dai.0
  484. <6>msm-codec-dai msm-codec-dai.0: asoc_msm_codec_probe: dev name msm-codec-dai.0
  485. <6>msm-dsp-audio msm-dsp-audio.0: msm_pcm_probe: dev name msm-dsp-audio.0
  486. <3>msm_wm8958_shutdown_power: codec power shutdown
  487. <4>vdd50_boost: Failed to create debugfs directory
  488. <3>wm8994_ldo_power: Power down the WM8994 LDOs
  489. <6>asoc: wm8994-aif1 <-> msm-cpu-dai.0 mapping ok
  490. <6>asoc: wm8994-aif2 <-> msm-cpu-dai.0 mapping ok
  491. <6>input: msm-audio headset as /devices/platform/soc-audio/sound/card0/input5
  492. <6>GACT probability NOT on
  493. <6>Mirror/redirect action on
  494. Failed to load ipt action
  495. <6>u32 classifier
  496. <6>    Performance counters on
  497. <6>    input device check on
  498. <6>    Actions configured
  499. <6>Netfilter messages via NETLINK v0.30.
  500. <6>nf_conntrack version 0.5.0 (13120 buckets, 52480 max)
  501. <6>ctnetlink v0.93: registering with nfnetlink.
  502. <6>NF_TPROXY: Transparent proxy support initialized, version 4.1.0
  503. <6>NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
  504. <6>xt_time: kernel timezone is -0000
  505. <6>ip_tables: (C) 2000-2006 Netfilter Core Team
  506. <6>arp_tables: (C) 2002 David S. Miller
  507. <6>TCP: cubic registered
  508. <6>NET: Registered protocol family 10
  509. <6>Mobile IPv6
  510. <6>ip6_tables: (C) 2000-2006 Netfilter Core Team
  511. <6>IPv6 over IPv4 tunneling driver
  512. <6>NET: Registered protocol family 17
  513. <6>NET: Registered protocol family 15
  514. <3>ulpi_read: timeout 48300000
  515. <6>Bluetooth: RFCOMM TTY layer initialized
  516. <6>Bluetooth: RFCOMM socket layer initialized
  517. <6>Bluetooth: RFCOMM ver 1.11
  518. <6>Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  519. <6>Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  520. <6>L2TP core driver, V2.0
  521. <6>PPPoL2TP kernel driver, V2.0
  522. <6>L2TP IP encapsulation support (L2TPv3)
  523. <6>L2TP netlink interface
  524. <6>L2TP ethernet pseudowire support (L2TPv3)
  525. <3>lcdc_tenderloin_panel_init: +++++++++++++++++++++++
  526. <3>lcdc_tenderloin_probe: ++
  527. <6>Lcdc_tenderloin_probe: bl_pwm0=b5bddc00 LPG_chan0=0
  528. <6>setting pdata->panel_info.fb_num to 3. type: 3
  529. <4>------------[ cut here ]------------
  530. <4>WARNING: at ../../../../../../kernel/htc/msm8960/arch/arm/mach-msm/clock-local.c:424 rcg_clk_prepare+0x2c/0x48()
  531. Attempting to prepare pixel_mdp_clk before setting its rate. Set the rate first!
  532. [<80014c60>] (unwind_backtrace+0x0/0x11c) from [<80078188>] (warn_slowpath_common+0x48/0x60)
  533. [<80078188>] (warn_slowpath_common+0x48/0x60) from [<800781f8>] (warn_slowpath_fmt+0x2c/0x3c)
  534. [<800781f8>] (warn_slowpath_fmt+0x2c/0x3c) from [<80059c40>] (rcg_clk_prepare+0x2c/0x48)
  535. [<80059c40>] (rcg_clk_prepare+0x2c/0x48) from [<800208b8>] (clk_prepare+0x94/0xe0)
  536. [<800208b8>] (clk_prepare+0x94/0xe0) from [<802ab490>] (cont_splash_clk_ctrl.part.0+0x14/0x74)
  537. [<802ab490>] (cont_splash_clk_ctrl.part.0+0x14/0x74) from [<802ab738>] (lcdc_probe+0xc4/0x1fc)
  538. [<802ab738>] (lcdc_probe+0xc4/0x1fc) from [<803205ac>] (platform_drv_probe+0x14/0x18)
  539. [<803205ac>] (platform_drv_probe+0x14/0x18) from [<8031f228>] (driver_probe_device+0x138/0x33c)
  540. [<8031f228>] (driver_probe_device+0x138/0x33c) from [<8031dd58>] (bus_for_each_drv+0x48/0x8c)
  541. [<8031dd58>] (bus_for_each_drv+0x48/0x8c) from [<8031f578>] (device_attach+0x7c/0xa0)
  542. [<8031f578>] (device_attach+0x7c/0xa0) from [<8031df2c>] (bus_probe_device+0x28/0x98)
  543. [<8031df2c>] (bus_probe_device+0x28/0x98) from [<8031c5a8>] (device_add+0x3f4/0x5a8)
  544. [<8031c5a8>] (device_add+0x3f4/0x5a8) from [<80320aa8>] (platform_device_add+0x12c/0x19c)
  545. [<80320aa8>] (platform_device_add+0x12c/0x19c) from [<80295a70>] (msm_fb_add_device+0x154/0x1b0)
  546. [<80295a70>] (msm_fb_add_device+0x154/0x1b0) from [<80663e9c>] (lcdc_tenderloin_probe+0x78/0x98)
  547. [<80663e9c>] (lcdc_tenderloin_probe+0x78/0x98) from [<803205ac>] (platform_drv_probe+0x14/0x18)
  548. [<803205ac>] (platform_drv_probe+0x14/0x18) from [<8031f228>] (driver_probe_device+0x138/0x33c)
  549. [<8031f228>] (driver_probe_device+0x138/0x33c) from [<8031dd58>] (bus_for_each_drv+0x48/0x8c)
  550. [<8031dd58>] (bus_for_each_drv+0x48/0x8c) from [<8031f578>] (device_attach+0x7c/0xa0)
  551. [<8031f578>] (device_attach+0x7c/0xa0) from [<8031df2c>] (bus_probe_device+0x28/0x98)
  552. [<8031df2c>] (bus_probe_device+0x28/0x98) from [<8031c5a8>] (device_add+0x3f4/0x5a8)
  553. [<8031c5a8>] (device_add+0x3f4/0x5a8) from [<80320aa8>] (platform_device_add+0x12c/0x19c)
  554. [<80320aa8>] (platform_device_add+0x12c/0x19c) from [<80064440>] (lcdc_tenderloin_device_register+0x7c/0xc8)
  555. [<80064440>] (lcdc_tenderloin_device_register+0x7c/0xc8) from [<808de498>] (lcdc_tenderloin_panel_init+0xa8/0xd8)
  556. [<808de498>] (lcdc_tenderloin_panel_init+0xa8/0xd8) from [<808d2b04>] (do_one_initcall+0x90/0x160)
  557. [<808d2b04>] (do_one_initcall+0x90/0x160) from [<808d2cc8>] (kernel_init+0xf4/0x1b8)
  558. [<808d2cc8>] (kernel_init+0xf4/0x1b8) from [<8000f5f4>] (kernel_thread_exit+0x0/0x8)
  559. <4>---[ end trace 8e42374ae981ba96 ]---
  560. <4>mmc1: queuing unknown CIS tuple 0x01 (3 bytes)
  561. <4>mmc1: queuing unknown CIS tuple 0x1a (5 bytes)
  562. <3>ulpi_read_with_reset: ulpi read failed for 5 times
  563. <3>ulpi_write: timeout
  564. <3>ulpi_write: timeout
  565. <6>FrameBuffer[0] 1024x768 size=9437184 bytes is registered successfully!
  566. <4>load_565rle_image: Can not open /initlogo.rle
  567. <7>Registered led device: lcd-backlight
  568. <6>mdp4_lcdc_vsync_init: ndx=0
  569. <6>VFP support v0.3: implementor 51 architecture 64 part 2d variant 0 rev 0
  570. <5>Registering SWP/SWPB emulation handler
  571. <6>clock_late_init: Removing enables held for handed-off clocks
  572. <4>mmc1: queuing unknown CIS tuple 0x1b (8 bytes)
  573. <4>mmc1: queuing unknown CIS tuple 0x14 (0 bytes)
  574. <4>mmc1: queuing unknown CIS tuple 0x80 (1 bytes)
  575. <4>mmc1: queuing unknown CIS tuple 0x81 (1 bytes)
  576. <4>mmc1: queuing unknown CIS tuple 0x82 (1 bytes)
  577. <6>mmc1: new high speed SDIO card at address 0001
  578. <6>MSM Watchdog Initialized
  579. <6>[MPDEC]: msm_mpdec_init init complete.<4>8058_l5: Failed to create debugfs directory
  580. <4>8058_l5: Failed to create debugfs directory
  581. <4>8058_l5: Failed to create debugfs directory
  582. <6>rtc-pm8xxx rtc-pm8xxx: setting system clock to 2014-11-24 12:08:17 UTC (1416830897)
  583. <6>msm_v4l2: msm_v4l2_init
  584. <6>ALSA device list:
  585. <6>  #0: msm-audio
  586. <4>Warning: unable to open an initial console.
  587. <6>Freeing init memory: 268K
  588. <7>SELinux: 1024 avtab hash slots, 2781 rules.
  589. <7>SELinux: 1024 avtab hash slots, 2781 rules.
  590. <7>SELinux:  1 users, 2 roles, 291 types, 1 bools, 1 sens, 1024 cats
  591. <7>SELinux:  84 classes, 2781 rules
  592. <7>SELinux:  Completing initialization.
  593. <7>SELinux:  Setting up existing superblocks.
  594. <7>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
  595. <7>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
  596. <7>SELinux: initialized (dev bdev, type bdev), not configured for labeling
  597. <7>SELinux: initialized (dev proc, type proc), uses genfs_contexts
  598. <7>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
  599. <7>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
  600. <7>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
  601. <7>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
  602. <7>SELinux: initialized (dev anon_inodefs, type anon_inodefs), not configured for labeling
  603. <7>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
  604. <7>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
  605. <7>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
  606. <7>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
  607. <6>msm_otg_suspend: usb in low power mode
  608. <5>type=1403 audit(1416830897.680:2): policy loaded auid=4294967295 ses=4294967295
  609. SELinux: Loaded policy from /sepolicy
  610. <5>type=1404 audit(1416830897.690:3): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
  611. <3>init: could not import file 'init.power.rc' from '/init.evervolv.rc'
  612. <4>init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead.
  613. <5>type=1404 audit(1416830901.703:4): enforcing=0 old_enforcing=1 auid=4294967295 ses=4294967295
  614. <3>init: invalid uid 'fm_radio'
  615. <3>init: invalid uid 'felicaclient'
  616. <3>init: invalid uid 'felicaclient'
  617. <3>init: invalid uid 'felicalock'
  618. <3>init: invalid uid 'felicaclient'
  619. <3>init: invalid uid 'felicaclient'
  620. <3>init: invalid uid 'felicaclient'
  621. <3>init: invalid uid 'felicaclient'
  622. <3>init: invalid uid 'felicaclient'
  623. <3>init: invalid uid 'autobot_access'
  624. <3>init: /dev/hw_random not found
  625. <7>SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
  626. <7>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
  627. <7>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
  628. <7>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
  629. <7>SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
  630. <6>kjournald starting.  Commit interval 5 seconds
  631. <4>EXT3-fs (mmcblk0p13): warning: maximal mount count reached, running e2fsck is recommended
  632. <6>EXT3-fs (mmcblk0p13): using internal journal
  633. <6>EXT3-fs (mmcblk0p13): mounted filesystem with writeback data mode
  634. <7>SELinux: initialized (dev mmcblk0p13, type ext3), uses xattr
  635. <6>EXT4-fs (dm-8): mounted filesystem with ordered data mode. Opts: barrier=1
  636. <7>SELinux: initialized (dev dm-8, type ext4), uses xattr
  637. <6>wm8994-codec wm8994-codec: MBC timestamp 4d6e4685
  638. <6>wm8994-codec wm8994-codec: MBC: ODM to BLOB v0.0.0 (odm2blo.pl:52679)
  639. Copyright (c) Wolfson Microelectronics plc. 2011
  640. Wed  2 Mar 2011 13:30:45
  641. mbc_odl.odm
  642. mbc_odl_vcp.txt
  643.  
  644. <6>wm8994-codec wm8994-codec: MBC: got firmware
  645. <6>wm8994-codec wm8994-codec: MBC+VSS timestamp 4d6e6714
  646. <6>wm8994-codec wm8994-codec: MBC+VSS: ODM to BLOB v0.0.0 (odm2blo.pl:52679)
  647. Copyright (c) Wolfson Microelectronics plc. 2011
  648. Wed  2 Mar 2011 15:49:40
  649. DSPPALM.odm
  650. DSPPALM_vcp.txt
  651.  
  652. <6>wm8994-codec wm8994-codec: MBC+VSS: got firmware
  653. <6>wm8994-codec wm8994-codec: ENH_EQ timestamp 4d6e489e
  654. <6>wm8994-codec wm8994-codec: ENH_EQ: ODM to BLOB v0.0.0 (odm2blo.pl:52679)
  655. Copyright (c) Wolfson Microelectronics plc. 2011
  656. Wed  2 Mar 2011 13:39:42
  657. HP_Beats.odm
  658. HP_Beats_vcp.txt
  659.  
  660. <6>wm8994-codec wm8994-codec: ENH_EQ: got firmware
  661. <3>ath6kl: temporary war to avoid sdio crc error
  662. <4>EXT4-fs (dm-10): warning: maximal mount count reached, running e2fsck is recommended
  663. <7>EXT4-fs (dm-10): ext4_orphan_cleanup: deleting unreferenced inode 526
  664. <7>EXT4-fs (dm-10): ext4_orphan_cleanup: deleting unreferenced inode 524
  665. <6>EXT4-fs (dm-10): 2 orphan inodes deleted
  666. <6>EXT4-fs (dm-10): recovery complete
  667. <6>EXT4-fs (dm-10): mounted filesystem with ordered data mode. Opts: barrier=1,noauto_da_alloc
  668. <7>SELinux: initialized (dev dm-10, type ext4), uses xattr
  669. <4>EXT4-fs (dm-9): warning: maximal mount count reached, running e2fsck is recommended
  670. <6>EXT4-fs (dm-9): recovery complete
  671. <6>EXT4-fs (dm-9): mounted filesystem with ordered data mode. Opts: barrier=1,noauto_da_alloc
  672. <7>SELinux: initialized (dev dm-9, type ext4), uses xattr
  673. <7>SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
  674. <3>init: /dev/hw_random not found
  675. <6>ath6kl: ar6003 hw 2.1.1 sdio fw 3.2.0.144 api 3
  676. <3>init: cannot find '/system/bin/rild', disabling 'ril-daemon'
  677. <3>healthd: wakealarm_init: timerfd_create failed
  678. <6>subsys-restart: restart_level_set(): Phase 3 behavior activated.
  679. <3>init: property 'sys.powerctl' doesn't exist while expanding '${sys.powerctl}'
  680. <3>init: powerctl: cannot expand '${sys.powerctl}'
  681. <3>init: property 'sys.sysctl.extra_free_kbytes' doesn't exist while expanding '${sys.sysctl.extra_free_kbytes}'
  682. <3>init: cannot expand '${sys.sysctl.extra_free_kbytes}' while writing to '/proc/sys/vm/extra_free_kbytes'
  683. <3>init: property 'sys.sysctl.tcp_def_init_rwnd' doesn't exist while expanding '${sys.sysctl.tcp_def_init_rwnd}'
  684. <3>init: cannot expand '${sys.sysctl.tcp_def_init_rwnd}' while writing to '/proc/sys/net/ipv4/tcp_default_init_rwnd'
  685. <3>init: service 'console' requires console
  686. <3>enable_store: android_usb: already disabled
  687. <6>mtp_bind_config
  688. <6>input: HPTouchpad as /devices/virtual/input/input6
  689. <6>msm_release_control: control0
  690. <6>__msm_release, open count =0
  691. <6>__msm_release, vfe_release
  692. <6>__msm_release: draining queue pict
  693. <6>__msm_release: draining queue event
  694. <6>__msm_release: completed
  695. <6>msm_release_control: draining queue control
  696. <6>msm_release_control, completed
  697. <3>[DISP] lcdc_panel_power: ++ 1
  698. <4>8058_l10: Failed to create debugfs directory
  699. <4>mdp4_csc_config: Block type 10 isn't supported by CSC.
  700. <4>mdp4_csc_config: Block type 8 isn't supported by CSC.
  701. <3>[DISP] lcdc_tenderloin_panel_set_backlight: 191
  702. <6>mdp4_overlay_mdp_perf_upd mdp clk is changed [1] from 0 to 128000000
  703. <7>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
  704. <6>warning: `zygote' uses 32-bit capabilities (legacy support in use)
  705. <6>lsm303dlh_acc_sysfs: hw init start
  706. <6>lsm303dlh_acc_sysfs: hw init done
  707. <6>healthd: battery l=100 v=4041 t=30.0 h=2 st=5 c=-954 chg=
  708. <6>request_suspend_state: wakeup (3->0) at 38890767012 (2014-11-24 12:08:55.305193205 UTC)
  709. <6>lsm303dlh_acc_sysfs: hw init start
  710. <6>lsm303dlh_acc_sysfs: hw init done
  711. lowmem_shrink: convert oom_adj to oom_score_adj:
  712. oom_adj 0 => oom_score_adj 0
  713. oom_adj 1 => oom_score_adj 58
  714. oom_adj 2 => oom_score_adj 117
  715. oom_adj 3 => oom_score_adj 176
  716. oom_adj 9 => oom_score_adj 529
  717. oom_adj 15 => oom_score_adj 1000
  718. <6>EXT4-fs (dm-11): mounted filesystem without journal. Opts: (null)
  719. <7>SELinux: initialized (dev dm-11, type ext4), uses xattr
  720. <6>EXT4-fs (dm-11): re-mounted. Opts: (null)
  721. <6>EXT4-fs (dm-11): re-mounted. Opts: (null)
  722. <6>EXT4-fs (dm-12): mounted filesystem without journal. Opts: (null)
  723. <7>SELinux: initialized (dev dm-12, type ext4), uses xattr
  724. <6>EXT4-fs (dm-12): re-mounted. Opts: (null)
  725. <6>EXT4-fs (dm-12): re-mounted. Opts: (null)
  726. <6>ADDRCONF(NETDEV_UP): wlan0: link is not ready
  727. <6>acc_open
  728. <6>acc_release
  729. <6>ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
  730. <3>[DISP] lcdc_tenderloin_panel_set_backlight: 61
  731. <5>type=1400 audit(1416830941.551:5): avc:  denied  { getattr } for  pid=931 comm="zygote" path="socket:[5284]" dev="sockfs" ino=5284 scontext=u:r:untrusted_app:s0 tcontext=u:r:init:s0 tclass=unix_stream_socket
  732. <5>type=1400 audit(1416830941.551:6): avc:  denied  { getopt } for  pid=931 comm="zygote" path="/dev/socket/zygote" scontext=u:r:untrusted_app:s0 tcontext=u:r:init:s0 tclass=unix_stream_socket
  733. <5>type=1400 audit(1416830941.561:7): avc:  denied  { read } for  pid=931 comm="re-initialized>" path=2F6465762F6173686D656D2F64616C76696B2D4C696E656172416C6C6F63202864656C6574656429 dev="tmpfs" ino=4670 scontext=u:r:untrusted_app:s0 tcontext=u:object_r:init_tmpfs:s0 tclass=file
  734. <5>type=1400 audit(1416830941.571:8): avc:  denied  { call } for  pid=931 comm="re-initialized>" scontext=u:r:untrusted_app:s0 tcontext=u:r:init:s0 tclass=binder
  735. <3>qtaguid: iface_stat: stat_update() wlan0 not found
  736. <7>SELinux: initialized (dev dm-6, type vfat), uses genfs_contexts
  737. <7>SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
  738. <5>type=1400 audit(1416830951.372:9): avc:  denied  { write } for  pid=1351 comm=4173796E635461736B202331 path=2F6465762F6173686D656D2F6C69626674324B52462E736F202864656C6574656429 dev="tmpfs" ino=6312 scontext=u:r:untrusted_app:s0 tcontext=u:object_r:untrusted_app_tmpfs:s0 tclass=file
  739. <7>wlan0: no IPv6 routers present
  740. <6>a6_update_connected_ps: ac=0 usb=0 dock=0
  741. <6>max8903b_current_setup: ### CHARGE_DISABLE
  742. <3>[DISP] lcdc_tenderloin_panel_set_backlight: 60
  743. <3>[DISP] lcdc_tenderloin_panel_set_backlight: 57
  744. <3>[DISP] lcdc_tenderloin_panel_set_backlight: 54
  745. <3>[DISP] lcdc_tenderloin_panel_set_backlight: 51
  746. <3>[DISP] lcdc_tenderloin_panel_set_backlight: 48
  747. <3>[DISP] lcdc_tenderloin_panel_set_backlight: 45
  748. <3>[DISP] lcdc_tenderloin_panel_set_backlight: 42
  749. <3>[DISP] lcdc_tenderloin_panel_set_backlight: 39
  750. <3>[DISP] lcdc_tenderloin_panel_set_backlight: 36
  751. <3>[DISP] lcdc_tenderloin_panel_set_backlight: 33
  752. <3>[DISP] lcdc_tenderloin_panel_set_backlight: 30
  753. <3>[DISP] lcdc_tenderloin_panel_set_backlight: 27
  754. <3>[DISP] lcdc_tenderloin_panel_set_backlight: 24
  755. <3>[DISP] lcdc_tenderloin_panel_set_backlight: 21
  756. <3>[DISP] lcdc_tenderloin_panel_set_backlight: 18
  757. <3>[DISP] lcdc_tenderloin_panel_set_backlight: 15
  758. <3>[DISP] lcdc_tenderloin_panel_set_backlight: 12
  759. <3>[DISP] lcdc_tenderloin_panel_set_backlight: 9
  760. <3>[DISP] lcdc_tenderloin_panel_set_backlight: 0
  761. <3>[DISP] lcdc_panel_power: ++ 0
  762. <6>request_suspend_state: sleep (0->3) at 86170669393 (2014-11-24 12:09:42.491034707 UTC)
  763. <6>[MPDEC]: Screen -> off. Deactivated mpdecision.
  764. <5>type=1400 audit(1416831042.401:10): avc:  denied  { transfer } for  pid=2328 comm="eller.stdviewer" scontext=u:r:untrusted_app:s0 tcontext=u:r:init:s0 tclass=binder
  765. <5>type=1400 audit(1416831042.731:11): avc:  denied  { read write } for  pid=2328 comm="eller.stdviewer" name="kgsl-3d0" dev="tmpfs" ino=4386 scontext=u:r:untrusted_app:s0 tcontext=u:object_r:device:s0 tclass=chr_file
  766. <5>type=1400 audit(1416831042.731:12): avc:  denied  { open } for  pid=2328 comm="eller.stdviewer" name="kgsl-3d0" dev="tmpfs" ino=4386 scontext=u:r:untrusted_app:s0 tcontext=u:object_r:device:s0 tclass=chr_file
  767. <5>type=1400 audit(1416831042.731:13): avc:  denied  { ioctl } for  pid=2328 comm="eller.stdviewer" path="/dev/kgsl-3d0" dev="tmpfs" ino=4386 scontext=u:r:untrusted_app:s0 tcontext=u:object_r:device:s0 tclass=chr_file
  768. <6>healthd: battery l=100 v=4080 t=29.0 h=2 st=5 c=-220 chg=
  769. <6>healthd: battery l=98 v=4075 t=29.0 h=2 st=3 c=-191 chg=
  770. <6>healthd: battery l=98 v=4080 t=29.0 h=2 st=3 c=-193 chg=
  771. <6>healthd: battery l=98 v=4080 t=28.0 h=2 st=3 c=-202 chg=
  772. <6>healthd: battery l=98 v=4080 t=28.0 h=2 st=3 c=-193 chg=
  773. <6>healthd: battery l=98 v=4080 t=28.0 h=2 st=3 c=-193 chg=
  774. <6>healthd: battery l=98 v=4080 t=28.0 h=2 st=3 c=-193 chg=
  775. <6>healthd: battery l=98 v=4080 t=28.0 h=2 st=3 c=-193 chg=
  776. <6>healthd: battery l=98 v=4075 t=28.0 h=2 st=3 c=-192 chg=
  777. <6>healthd: battery l=98 v=4075 t=28.0 h=2 st=3 c=-193 chg=
  778. <6>healthd: battery l=98 v=4075 t=28.0 h=2 st=3 c=-193 chg=
  779. <6>healthd: battery l=98 v=4075 t=27.0 h=2 st=3 c=-192 chg=
  780. <6>healthd: battery l=98 v=4075 t=27.0 h=2 st=3 c=-180 chg=
  781. <6>healthd: battery l=98 v=4075 t=27.0 h=2 st=3 c=-191 chg=
  782. <6>healthd: battery l=98 v=4075 t=27.0 h=2 st=3 c=-191 chg=
  783. <6>healthd: battery l=98 v=4070 t=27.0 h=2 st=3 c=-190 chg=
  784. <6>healthd: battery l=97 v=4070 t=27.0 h=2 st=3 c=-188 chg=
  785. <6>healthd: battery l=97 v=4070 t=27.0 h=2 st=3 c=-189 chg=
  786. <6>healthd: battery l=97 v=4070 t=27.0 h=2 st=3 c=-190 chg=
  787. <6>healthd: battery l=97 v=4070 t=27.0 h=2 st=3 c=-179 chg=
  788. <6>healthd: battery l=97 v=4070 t=27.0 h=2 st=3 c=-190 chg=
  789. <6>healthd: battery l=97 v=4070 t=27.0 h=2 st=3 c=-190 chg=
  790. <6>healthd: battery l=97 v=4065 t=26.0 h=2 st=3 c=-192 chg=
  791. <6>healthd: battery l=97 v=4065 t=26.0 h=2 st=3 c=-228 chg=
  792. <6>healthd: battery l=97 v=4065 t=26.0 h=2 st=3 c=-210 chg=
  793. <6>healthd: battery l=97 v=4060 t=26.0 h=2 st=3 c=-184 chg=
  794. <6>PM: suspend entry 2014-11-24 12:38:08.406256855 UTC
  795. Freezing user space processes ... (elapsed 0.018 seconds) done.
  796. Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
  797. Suspending console(s) (use no_console_suspend to debug)
  798. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  799. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  800. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  801. <3>msm_wm8958_shutdown_power: Already disabled -- wm8994_reg_status = 0
  802. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  803. max8903b_suspend: suspend
  804. <6>PM: suspend of devices complete after 32.043 msecs
  805. <6>PM: late suspend of devices complete after 2.136 msecs
  806. <6>PM: noirq suspend of devices complete after 2.960 msecs
  807. Disabling non-boot CPUs ...
  808. <6>msm_pm_enter
  809. <6>msm_pm_enter: power collapse
  810. <6>msm_mpm_irqs_detectable: cannot monitor 0000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000<6>msm_pm_enter: return
  811. <6>PM: noirq resume of devices complete after 2.166 msecs
  812. <6>wakeup wake lock: mmc1
  813. <6>PM: early resume of devices complete after 2.136 msecs
  814. max8903b_resume: resume
  815. <3>msm_wm8958_setup_power: codec power setup
  816. <4>8058_s3: Failed to create debugfs directory
  817. <3>wm8994_ldo_power: Power up the WM8994 LDOs
  818. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  819. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  820. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  821. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  822. <6>PM: resume of devices complete after 72.759 msecs
  823. Restarting tasks ... done.
  824. <6>PM: suspend exit 2014-11-24 12:38:23.021588028 UTC
  825. <6>suspend: exit suspend, ret = 0 (2014-11-24 12:38:23.021618519 UTC)
  826. <6>active wake lock power-supply
  827. <6>PM: suspend entry 2014-11-24 12:38:23.044670587 UTC
  828. Freezing user space processes ... (elapsed 0.017 seconds) done.
  829. Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
  830. Suspending console(s) (use no_console_suspend to debug)
  831. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  832. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  833. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  834. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  835. <3>msm_wm8958_shutdown_power: codec power shutdown
  836. <3>wm8994_ldo_power: Power down the WM8994 LDOs
  837. max8903b_suspend: suspend
  838. <6>PM: suspend of devices complete after 33.006 msecs
  839. <6>PM: late suspend of devices complete after 2.104 msecs
  840. <6>PM: noirq suspend of devices complete after 2.867 msecs
  841. Disabling non-boot CPUs ...
  842. <6>msm_pm_enter
  843. <6>msm_pm_enter: power collapse
  844. <6>msm_mpm_irqs_detectable: cannot monitor 0000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000<6>msm_pm_enter: return
  845. <6>PM: noirq resume of devices complete after 2.135 msecs
  846. <6>wakeup wake lock: mmc1
  847. <6>PM: early resume of devices complete after 2.104 msecs
  848. max8903b_resume: resume
  849. <3>msm_wm8958_setup_power: codec power setup
  850. <4>8058_s3: Failed to create debugfs directory
  851. <3>wm8994_ldo_power: Power up the WM8994 LDOs
  852. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  853. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  854. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  855. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  856. <6>PM: resume of devices complete after 72.673 msecs
  857. Restarting tasks ... done.
  858. <6>PM: suspend exit 2014-11-24 12:38:48.023389021 UTC
  859. <6>suspend: exit suspend, ret = 0 (2014-11-24 12:38:48.023419512 UTC)
  860. <6>active wake lock power-supply
  861. <6>PM: suspend entry 2014-11-24 12:38:48.052051873 UTC
  862. Freezing user space processes ... (elapsed 0.001 seconds) done.
  863. Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
  864. Suspending console(s) (use no_console_suspend to debug)
  865. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  866. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  867. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  868. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  869. <3>msm_wm8958_shutdown_power: codec power shutdown
  870. <3>wm8994_ldo_power: Power down the WM8994 LDOs
  871. max8903b_suspend: suspend
  872. <6>PM: suspend of devices complete after 28.305 msecs
  873. <6>PM: late suspend of devices complete after 2.135 msecs
  874. <6>PM: noirq suspend of devices complete after 2.806 msecs
  875. Disabling non-boot CPUs ...
  876. <6>msm_pm_enter
  877. <6>msm_pm_enter: power collapse
  878. <6>msm_mpm_irqs_detectable: cannot monitor 0000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000<6>msm_pm_enter: return
  879. <6>PM: noirq resume of devices complete after 2.165 msecs
  880. <6>wakeup wake lock: alarm_rtc
  881. <6>PM: early resume of devices complete after 2.135 msecs
  882. max8903b_resume: resume
  883. <3>msm_wm8958_setup_power: codec power setup
  884. <4>8058_s3: Failed to create debugfs directory
  885. <3>wm8994_ldo_power: Power up the WM8994 LDOs
  886. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  887. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  888. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  889. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  890. <6>PM: resume of devices complete after 68.218 msecs
  891. Restarting tasks ... done.
  892. <6>PM: suspend exit 2014-11-24 12:41:05.025280022 UTC
  893. <6>suspend: exit suspend, ret = 0 (2014-11-24 12:41:05.025310516 UTC)
  894. <6>active wake lock PowerManagerService.WakeLocks
  895. <6>active wake lock power-supply
  896. <6>active wake lock alarm, time left 497
  897. <6>healthd: battery l=97 v=4075 t=26.0 h=2 st=3 c=-52 chg=
  898. <6>healthd: battery l=97 v=4070 t=26.0 h=2 st=3 c=-57 chg=
  899. <6>healthd: battery l=97 v=4070 t=26.0 h=2 st=3 c=-57 chg=
  900. <6>healthd: battery l=97 v=4056 t=26.0 h=2 st=3 c=-293 chg=
  901. <6>healthd: battery l=97 v=4056 t=26.0 h=2 st=3 c=-314 chg=
  902. <6>healthd: battery l=97 v=4056 t=26.0 h=2 st=3 c=-292 chg=
  903. <6>healthd: battery l=97 v=4056 t=26.0 h=2 st=3 c=-292 chg=
  904. <6>healthd: battery l=97 v=4051 t=26.0 h=2 st=3 c=-293 chg=
  905. <6>PM: suspend entry 2014-11-24 12:46:53.997363768 UTC
  906. Freezing user space processes ... (elapsed 0.006 seconds) done.
  907. Freezing remaining freezable tasks ... (elapsed 0.002 seconds) done.
  908. Suspending console(s) (use no_console_suspend to debug)
  909. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  910. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  911. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  912. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  913. <3>msm_wm8958_shutdown_power: codec power shutdown
  914. <3>wm8994_ldo_power: Power down the WM8994 LDOs
  915. max8903b_suspend: suspend
  916. <6>PM: suspend of devices complete after 67.291 msecs
  917. <6>PM: late suspend of devices complete after 2.197 msecs
  918. <6>PM: noirq suspend of devices complete after 2.838 msecs
  919. Disabling non-boot CPUs ...
  920. <6>msm_pm_enter
  921. <6>msm_pm_enter: power collapse
  922. <6>msm_mpm_irqs_detectable: cannot monitor 0000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000<6>msm_pm_enter: return
  923. <6>PM: noirq resume of devices complete after 2.136 msecs
  924. <6>wakeup wake lock: mmc1
  925. <6>PM: early resume of devices complete after 2.166 msecs
  926. max8903b_resume: resume
  927. <3>msm_wm8958_setup_power: codec power setup
  928. <4>8058_s3: Failed to create debugfs directory
  929. <3>wm8994_ldo_power: Power up the WM8994 LDOs
  930. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  931. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  932. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  933. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  934. <6>PM: resume of devices complete after 73.368 msecs
  935. Restarting tasks ... done.
  936. <6>PM: suspend exit 2014-11-24 12:50:02.010642084 UTC
  937. <6>suspend: exit suspend, ret = 0 (2014-11-24 12:50:02.010672577 UTC)
  938. <6>active wake lock PowerManagerService.WakeLocks
  939. <6>active wake lock power-supply
  940. <6>healthd: battery l=97 v=4065 t=25.0 h=2 st=3 c=-44 chg=
  941. <6>PM: suspend entry 2014-11-24 12:50:02.071415162 UTC
  942. Freezing user space processes ... (elapsed 0.001 seconds) done.
  943. Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
  944. Suspending console(s) (use no_console_suspend to debug)
  945. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  946. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  947. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  948. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  949. <3>msm_wm8958_shutdown_power: codec power shutdown
  950. <3>wm8994_ldo_power: Power down the WM8994 LDOs
  951. max8903b_suspend: suspend
  952. <6>PM: suspend of devices complete after 32.544 msecs
  953. <6>PM: late suspend of devices complete after 2.135 msecs
  954. <6>PM: noirq suspend of devices complete after 2.806 msecs
  955. Disabling non-boot CPUs ...
  956. <6>msm_pm_enter
  957. <6>msm_pm_enter: power collapse
  958. <6>msm_mpm_irqs_detectable: cannot monitor 0000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000<6>msm_pm_enter: return
  959. <6>PM: noirq resume of devices complete after 2.135 msecs
  960. <6>wakeup wake lock: mmc1
  961. <6>PM: early resume of devices complete after 2.135 msecs
  962. max8903b_resume: resume
  963. <3>msm_wm8958_setup_power: codec power setup
  964. <4>8058_s3: Failed to create debugfs directory
  965. <3>wm8994_ldo_power: Power up the WM8994 LDOs
  966. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  967. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  968. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  969. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  970. <6>PM: resume of devices complete after 72.213 msecs
  971. Restarting tasks ... done.
  972. <6>PM: suspend exit 2014-11-24 12:51:27.010277704 UTC
  973. <6>suspend: exit suspend, ret = 0 (2014-11-24 12:51:27.010308201 UTC)
  974. <6>active wake lock PowerManagerService.WakeLocks
  975. <6>active wake lock power-supply
  976. <6>healthd: battery l=97 v=4065 t=25.0 h=2 st=3 c=-52 chg=
  977. <6>PM: suspend entry 2014-11-24 12:51:27.065716305 UTC
  978. Freezing user space processes ... (elapsed 0.003 seconds) done.
  979. Freezing remaining freezable tasks ... (elapsed 0.002 seconds) done.
  980. Suspending console(s) (use no_console_suspend to debug)
  981. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  982. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  983. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  984. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  985. <3>msm_wm8958_shutdown_power: codec power shutdown
  986. <3>wm8994_ldo_power: Power down the WM8994 LDOs
  987. max8903b_suspend: suspend
  988. <6>PM: suspend of devices complete after 49.809 msecs
  989. <6>PM: late suspend of devices complete after 2.104 msecs
  990. <6>PM: noirq suspend of devices complete after 2.928 msecs
  991. Disabling non-boot CPUs ...
  992. <6>msm_pm_enter
  993. <6>msm_pm_enter: power collapse
  994. <6>msm_mpm_irqs_detectable: cannot monitor 0000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000<6>msm_pm_enter: return
  995. <6>PM: noirq resume of devices complete after 2.135 msecs
  996. <6>wakeup wake lock: alarm_rtc
  997. <6>PM: early resume of devices complete after 2.135 msecs
  998. max8903b_resume: resume
  999. <3>msm_wm8958_setup_power: codec power setup
  1000. <4>8058_s3: Failed to create debugfs directory
  1001. <3>wm8994_ldo_power: Power up the WM8994 LDOs
  1002. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  1003. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  1004. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  1005. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  1006. <6>PM: resume of devices complete after 69.012 msecs
  1007. Restarting tasks ... done.
  1008. <6>PM: suspend exit 2014-11-24 12:53:06.013082951 UTC
  1009. <6>suspend: exit suspend, ret = 0 (2014-11-24 12:53:06.013113448 UTC)
  1010. <6>active wake lock PowerManagerService.WakeLocks
  1011. <6>active wake lock power-supply
  1012. <6>healthd: battery l=97 v=4065 t=25.0 h=2 st=3 c=-53 chg=
  1013. <6>PM: suspend entry 2014-11-24 12:53:06.074010119 UTC
  1014. Freezing user space processes ... (elapsed 0.003 seconds) done.
  1015. Freezing remaining freezable tasks ... (elapsed 0.002 seconds) done.
  1016. Suspending console(s) (use no_console_suspend to debug)
  1017. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  1018. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  1019. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  1020. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  1021. <3>msm_wm8958_shutdown_power: codec power shutdown
  1022. <3>wm8994_ldo_power: Power down the WM8994 LDOs
  1023. max8903b_suspend: suspend
  1024. <6>PM: suspend of devices complete after 35.412 msecs
  1025. <6>PM: late suspend of devices complete after 2.226 msecs
  1026. <6>PM: noirq suspend of devices complete after 2.836 msecs
  1027. Disabling non-boot CPUs ...
  1028. <6>msm_pm_enter
  1029. <6>msm_pm_enter: power collapse
  1030. <6>msm_mpm_irqs_detectable: cannot monitor 0000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000<6>msm_pm_enter: return
  1031. <6>PM: noirq resume of devices complete after 2.165 msecs
  1032. <6>wakeup wake lock: alarm_rtc
  1033. <6>PM: early resume of devices complete after 2.104 msecs
  1034. max8903b_resume: resume
  1035. <3>msm_wm8958_setup_power: codec power setup
  1036. <4>8058_s3: Failed to create debugfs directory
  1037. <3>wm8994_ldo_power: Power up the WM8994 LDOs
  1038. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  1039. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  1040. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  1041. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  1042. <6>PM: resume of devices complete after 68.340 msecs
  1043. Restarting tasks ... done.
  1044. <6>PM: suspend exit 2014-11-24 13:00:37.014668794 UTC
  1045. <6>suspend: exit suspend, ret = 0 (2014-11-24 13:00:37.014668794 UTC)
  1046. <6>active wake lock PowerManagerService.WakeLocks
  1047. <6>active wake lock event5-500
  1048. <6>active wake lock event1-500
  1049. <6>active wake lock event0-500
  1050. <6>active wake lock power-supply
  1051. <6>healthd: battery l=96 v=4065 t=25.0 h=2 st=3 c=-44 chg=
  1052. <6>PM: suspend entry 2014-11-24 13:00:37.097616181 UTC
  1053. Freezing user space processes ... <6>active wake lock PowerManagerService.WakeLocks
  1054.  
  1055. <3>Freezing of tasks aborted after 0.000 seconds (16 tasks refusing to freeze, wq_busy=0):
  1056.  
  1057. Restarting tasks ... done.
  1058. <6>PM: suspend exit 2014-11-24 13:00:37.209055875 UTC
  1059. <6>suspend: exit suspend, ret = -16 (2014-11-24 13:00:37.209086375 UTC)
  1060. <6>PM: suspend entry 2014-11-24 13:00:37.274452795 UTC
  1061. Freezing user space processes ... (elapsed 0.006 seconds) done.
  1062. Freezing remaining freezable tasks ... (elapsed 0.002 seconds) done.
  1063. Suspending console(s) (use no_console_suspend to debug)
  1064. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  1065. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  1066. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  1067. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  1068. <3>msm_wm8958_shutdown_power: codec power shutdown
  1069. <3>wm8994_ldo_power: Power down the WM8994 LDOs
  1070. max8903b_suspend: suspend
  1071. <6>PM: suspend of devices complete after 59.544 msecs
  1072. <6>PM: late suspend of devices complete after 2.135 msecs
  1073. <6>PM: noirq suspend of devices complete after 2.806 msecs
  1074. Disabling non-boot CPUs ...
  1075. <6>msm_pm_enter
  1076. <6>msm_pm_enter: power collapse
  1077. <6>msm_mpm_irqs_detectable: cannot monitor 0000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000<6>msm_pm_enter: return
  1078. <6>PM: noirq resume of devices complete after 2.135 msecs
  1079. <6>wakeup wake lock: alarm_rtc
  1080. <6>PM: early resume of devices complete after 2.135 msecs
  1081. max8903b_resume: resume
  1082. <3>msm_wm8958_setup_power: codec power setup
  1083. <4>8058_s3: Failed to create debugfs directory
  1084. <3>wm8994_ldo_power: Power up the WM8994 LDOs
  1085. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  1086. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  1087. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  1088. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  1089. <6>PM: resume of devices complete after 69.988 msecs
  1090. Restarting tasks ... done.
  1091. <6>PM: suspend exit 2014-11-24 13:05:06.013326694 UTC
  1092. <6>suspend: exit suspend, ret = 0 (2014-11-24 13:05:06.013357187 UTC)
  1093. <6>healthd: battery l=96 v=4065 t=24.0 h=2 st=3 c=-44 chg=
  1094. <6>PM: suspend entry 2014-11-24 13:05:06.078494123 UTC
  1095. Freezing user space processes ... <6>active wake lock PowerManagerService.WakeLocks
  1096.  
  1097. <3>Freezing of tasks aborted after 0.001 seconds (16 tasks refusing to freeze, wq_busy=0):
  1098.  
  1099. Restarting tasks ... done.
  1100. <6>PM: suspend exit 2014-11-24 13:05:06.125917787 UTC
  1101. <6>suspend: exit suspend, ret = -16 (2014-11-24 13:05:06.125978778 UTC)
  1102. <6>PM: suspend entry 2014-11-24 13:05:12.475848807 UTC
  1103. Freezing user space processes ... (elapsed 0.004 seconds) done.
  1104. Freezing remaining freezable tasks ... (elapsed 0.002 seconds) done.
  1105. Suspending console(s) (use no_console_suspend to debug)
  1106. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  1107. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  1108. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  1109. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  1110. <3>msm_wm8958_shutdown_power: codec power shutdown
  1111. <3>wm8994_ldo_power: Power down the WM8994 LDOs
  1112. max8903b_suspend: suspend
  1113. <6>PM: suspend of devices complete after 61.126 msecs
  1114. <6>PM: late suspend of devices complete after 2.136 msecs
  1115. <6>PM: noirq suspend of devices complete after 2.838 msecs
  1116. Disabling non-boot CPUs ...
  1117. <6>msm_pm_enter
  1118. <6>msm_pm_enter: power collapse
  1119. <6>msm_mpm_irqs_detectable: cannot monitor 0000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000<6>msm_pm_enter: return
  1120. <6>PM: noirq resume of devices complete after 2.197 msecs
  1121. <6>wakeup wake lock: mmc1
  1122. <6>PM: early resume of devices complete after 2.136 msecs
  1123. max8903b_resume: resume
  1124. <3>msm_wm8958_setup_power: codec power setup
  1125. <4>8058_s3: Failed to create debugfs directory
  1126. <3>wm8994_ldo_power: Power up the WM8994 LDOs
  1127. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  1128. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  1129. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  1130. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  1131. <6>PM: resume of devices complete after 72.287 msecs
  1132. Restarting tasks ... done.
  1133. <6>PM: suspend exit 2014-11-24 13:05:26.008233805 UTC
  1134. <6>suspend: exit suspend, ret = 0 (2014-11-24 13:05:26.008264300 UTC)
  1135. <6>active wake lock power-supply
  1136. <6>PM: suspend entry 2014-11-24 13:05:26.050863563 UTC
  1137. <6>healthd: battery l=96 v=4065 t=24.0 h=2 st=3 c=-42 chg=
  1138. Freezing user space processes ... (elapsed 0.001 seconds) done.
  1139. Freezing remaining freezable tasks ... (elapsed 0.002 seconds) done.
  1140. Suspending console(s) (use no_console_suspend to debug)
  1141. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  1142. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  1143. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  1144. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  1145. <3>msm_wm8958_shutdown_power: codec power shutdown
  1146. <3>wm8994_ldo_power: Power down the WM8994 LDOs
  1147. max8903b_suspend: suspend
  1148. <6>PM: suspend of devices complete after 61.262 msecs
  1149. <6>PM: late suspend of devices complete after 2.135 msecs
  1150. <6>PM: noirq suspend of devices complete after 2.837 msecs
  1151. Disabling non-boot CPUs ...
  1152. <6>msm_pm_enter
  1153. <6>msm_pm_enter: power collapse
  1154. <6>msm_mpm_irqs_detectable: cannot monitor 0000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000<6>msm_pm_enter: return
  1155. <6>PM: noirq resume of devices complete after 2.196 msecs
  1156. <6>wakeup wake lock: mmc1
  1157. <6>PM: early resume of devices complete after 2.135 msecs
  1158. max8903b_resume: resume
  1159. <3>msm_wm8958_setup_power: codec power setup
  1160. <4>8058_s3: Failed to create debugfs directory
  1161. <3>wm8994_ldo_power: Power up the WM8994 LDOs
  1162. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  1163. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  1164. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  1165. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  1166. <6>PM: resume of devices complete after 70.813 msecs
  1167. Restarting tasks ... done.
  1168. <6>PM: suspend exit 2014-11-24 13:05:27.007227807 UTC
  1169. <6>suspend: exit suspend, ret = 0 (2014-11-24 13:05:27.007258304 UTC)
  1170. <6>active wake lock power-supply
  1171. <6>PM: suspend entry 2014-11-24 13:05:27.043151869 UTC
  1172. <6>healthd: battery l=96 v=4065 t=24.0 h=2 st=3 c=-42 chg=
  1173. Freezing user space processes ... (elapsed 0.001 seconds) done.
  1174. Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
  1175. Suspending console(s) (use no_console_suspend to debug)
  1176. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  1177. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  1178. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  1179. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  1180. <3>msm_wm8958_shutdown_power: codec power shutdown
  1181. <3>wm8994_ldo_power: Power down the WM8994 LDOs
  1182. max8903b_suspend: suspend
  1183. <6>PM: suspend of devices complete after 26.536 msecs
  1184. <6>PM: late suspend of devices complete after 2.287 msecs
  1185. <6>PM: noirq suspend of devices complete after 2.867 msecs
  1186. Disabling non-boot CPUs ...
  1187. <6>msm_pm_enter
  1188. <6>msm_pm_enter: power collapse
  1189. <6>msm_mpm_irqs_detectable: cannot monitor 0000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000<6>msm_pm_enter: return
  1190. <6>PM: noirq resume of devices complete after 2.165 msecs
  1191. <6>wakeup wake lock: mmc1
  1192. <6>PM: early resume of devices complete after 2.135 msecs
  1193. max8903b_resume: resume
  1194. <3>msm_wm8958_setup_power: codec power setup
  1195. <4>8058_s3: Failed to create debugfs directory
  1196. <3>wm8994_ldo_power: Power up the WM8994 LDOs
  1197. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  1198. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  1199. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  1200. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  1201. <6>PM: resume of devices complete after 72.152 msecs
  1202. Restarting tasks ... done.
  1203. <6>PM: suspend exit 2014-11-24 13:10:27.013905874 UTC
  1204. <6>suspend: exit suspend, ret = 0 (2014-11-24 13:10:27.013905874 UTC)
  1205. <6>active wake lock PowerManagerService.WakeLocks
  1206. <6>active wake lock power-supply
  1207. <6>healthd: battery l=96 v=4065 t=24.0 h=2 st=3 c=-43 chg=
  1208. <6>PM: suspend entry 2014-11-24 13:10:27.066720720 UTC
  1209. Freezing user space processes ... (elapsed 0.002 seconds) done.
  1210. Freezing remaining freezable tasks ... (elapsed 0.002 seconds) done.
  1211. Suspending console(s) (use no_console_suspend to debug)
  1212. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  1213. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  1214. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  1215. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  1216. <3>msm_wm8958_shutdown_power: codec power shutdown
  1217. <3>wm8994_ldo_power: Power down the WM8994 LDOs
  1218. max8903b_suspend: suspend
  1219. <6>PM: suspend of devices complete after 50.664 msecs
  1220. <6>PM: late suspend of devices complete after 2.135 msecs
  1221. <6>PM: noirq suspend of devices complete after 2.806 msecs
  1222. Disabling non-boot CPUs ...
  1223. <6>msm_pm_enter
  1224. <6>msm_pm_enter: power collapse
  1225. <6>msm_mpm_irqs_detectable: cannot monitor 0000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000<6>msm_pm_enter: return
  1226. <6>PM: noirq resume of devices complete after 2.165 msecs
  1227. <6>wakeup wake lock: mmc1
  1228. <6>PM: early resume of devices complete after 2.135 msecs
  1229. max8903b_resume: resume
  1230. <3>msm_wm8958_setup_power: codec power setup
  1231. <4>8058_s3: Failed to create debugfs directory
  1232. <3>wm8994_ldo_power: Power up the WM8994 LDOs
  1233. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  1234. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  1235. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  1236. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  1237. <6>PM: resume of devices complete after 72.640 msecs
  1238. Restarting tasks ... done.
  1239. <6>PM: suspend exit 2014-11-24 13:10:30.007410972 UTC
  1240. <6>suspend: exit suspend, ret = 0 (2014-11-24 13:10:30.007441470 UTC)
  1241. <6>active wake lock power-supply
  1242. <6>PM: suspend entry 2014-11-24 13:10:30.051752520 UTC
  1243. <6>healthd: battery l=96 v=4065 t=24.0 h=2 st=3 c=-65 chg=
  1244. Freezing user space processes ... (elapsed 0.001 seconds) done.
  1245. Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
  1246. Suspending console(s) (use no_console_suspend to debug)
  1247. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  1248. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  1249. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  1250. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  1251. <3>msm_wm8958_shutdown_power: codec power shutdown
  1252. <3>wm8994_ldo_power: Power down the WM8994 LDOs
  1253. max8903b_suspend: suspend
  1254. <6>PM: suspend of devices complete after 32.668 msecs
  1255. <6>PM: late suspend of devices complete after 2.257 msecs
  1256. <6>PM: noirq suspend of devices complete after 2.836 msecs
  1257. Disabling non-boot CPUs ...
  1258. <6>msm_pm_enter
  1259. <6>msm_pm_enter: power collapse
  1260. <6>msm_mpm_irqs_detectable: cannot monitor 0000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000<6>msm_pm_enter: return
  1261. <6>PM: noirq resume of devices complete after 2.135 msecs
  1262. <6>wakeup wake lock: alarm_rtc
  1263. <6>PM: early resume of devices complete after 2.104 msecs
  1264. max8903b_resume: resume
  1265. <3>msm_wm8958_setup_power: codec power setup
  1266. <4>8058_s3: Failed to create debugfs directory
  1267. <3>wm8994_ldo_power: Power up the WM8994 LDOs
  1268. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  1269. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  1270. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  1271. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  1272. <6>PM: resume of devices complete after 68.768 msecs
  1273. Restarting tasks ... done.
  1274. <6>PM: suspend exit 2014-11-24 13:14:51.014638217 UTC
  1275. <6>suspend: exit suspend, ret = 0 (2014-11-24 13:14:51.014638217 UTC)
  1276. <6>active wake lock PowerManagerService.WakeLocks
  1277. <6>active wake lock power-supply
  1278. <6>active wake lock alarm, time left 498
  1279. <6>healthd: battery l=96 v=4065 t=24.0 h=2 st=3 c=-52 chg=
  1280. <6>PM: suspend entry 2014-11-24 13:14:51.216010635 UTC
  1281. Freezing user space processes ... (elapsed 0.005 seconds) done.
  1282. Freezing remaining freezable tasks ... (elapsed 0.002 seconds) done.
  1283. Suspending console(s) (use no_console_suspend to debug)
  1284. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  1285. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  1286. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  1287. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  1288. <3>msm_wm8958_shutdown_power: codec power shutdown
  1289. <3>wm8994_ldo_power: Power down the WM8994 LDOs
  1290. max8903b_suspend: suspend
  1291. <6>PM: suspend of devices complete after 57.292 msecs
  1292. <6>PM: late suspend of devices complete after 4.484 msecs
  1293. <6>PM: noirq suspend of devices complete after 5.704 msecs
  1294. Disabling non-boot CPUs ...
  1295. <6>msm_pm_enter
  1296. <6>msm_pm_enter: power collapse
  1297. <6>msm_mpm_irqs_detectable: cannot monitor 0000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000<6>msm_pm_enter: return
  1298. <6>PM: noirq resume of devices complete after 4.423 msecs
  1299. <6>wakeup wake lock: alarm_rtc
  1300. <6>PM: early resume of devices complete after 4.362 msecs
  1301. max8903b_resume: resume
  1302. <3>msm_wm8958_setup_power: codec power setup
  1303. <4>8058_s3: Failed to create debugfs directory
  1304. <3>wm8994_ldo_power: Power up the WM8994 LDOs
  1305. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  1306. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  1307. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  1308. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  1309. <6>PM: resume of devices complete after 71.848 msecs
  1310. Restarting tasks ... done.
  1311. <6>PM: suspend exit 2014-11-24 13:17:06.014333479 UTC
  1312. <6>suspend: exit suspend, ret = 0 (2014-11-24 13:17:06.014363973 UTC)
  1313. <6>healthd: battery l=96 v=4065 t=24.0 h=2 st=3 c=-41 chg=
  1314. <6>PM: suspend entry 2014-11-24 13:17:06.088345523 UTC
  1315. Freezing user space processes ... (elapsed 0.001 seconds) done.
  1316. Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
  1317. Suspending console(s) (use no_console_suspend to debug)
  1318. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  1319. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  1320. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  1321. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  1322. <3>msm_wm8958_shutdown_power: codec power shutdown
  1323. <3>wm8994_ldo_power: Power down the WM8994 LDOs
  1324. max8903b_suspend: suspend
  1325. <6>PM: suspend of devices complete after 28.580 msecs
  1326. <6>PM: late suspend of devices complete after 2.135 msecs
  1327. <6>PM: noirq suspend of devices complete after 2.806 msecs
  1328. Disabling non-boot CPUs ...
  1329. <6>msm_pm_enter
  1330. <6>msm_pm_enter: power collapse
  1331. <6>msm_mpm_irqs_detectable: cannot monitor 0000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000<6>msm_pm_enter: return
  1332. <6>PM: noirq resume of devices complete after 2.196 msecs
  1333. <6>wakeup wake lock: alarm_rtc
  1334. <6>PM: early resume of devices complete after 2.135 msecs
  1335. max8903b_resume: resume
  1336. <3>msm_wm8958_setup_power: codec power setup
  1337. <4>8058_s3: Failed to create debugfs directory
  1338. <3>wm8994_ldo_power: Power up the WM8994 LDOs
  1339. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  1340. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  1341. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  1342. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  1343. <6>PM: resume of devices complete after 68.187 msecs
  1344. Restarting tasks ... done.
  1345. <6>PM: suspend exit 2014-11-24 13:20:43.010795688 UTC
  1346. <6>suspend: exit suspend, ret = 0 (2014-11-24 13:20:43.010826181 UTC)
  1347. <6>active wake lock PowerManagerService.WakeLocks
  1348. <6>active wake lock power-supply
  1349. <6>active wake lock alarm, time left 499
  1350. <6>healthd: battery l=96 v=4060 t=24.0 h=2 st=3 c=-43 chg=
  1351. <6>PM: suspend entry 2014-11-24 13:20:43.071661174 UTC
  1352. Freezing user space processes ... (elapsed 0.001 seconds) done.
  1353. Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
  1354. Suspending console(s) (use no_console_suspend to debug)
  1355. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  1356. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  1357. <3>msm_wm8958_shutdown_power: codec power shutdown
  1358. <3>wm8994_ldo_power: Power down the WM8994 LDOs
  1359. max8903b_suspend: suspend
  1360. <6>PM: suspend of devices complete after 25.834 msecs
  1361. <6>PM: late suspend of devices complete after 2.104 msecs
  1362. <6>PM: noirq suspend of devices complete after 2.836 msecs
  1363. Disabling non-boot CPUs ...
  1364. <6>msm_pm_enter
  1365. <6>msm_pm_enter: power collapse
  1366. <6>msm_mpm_irqs_detectable: cannot monitor 0000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000<6>msm_pm_enter: return
  1367. <6>PM: noirq resume of devices complete after 2.135 msecs
  1368. <6>wakeup wake lock: alarm_rtc
  1369. <6>PM: early resume of devices complete after 2.135 msecs
  1370. max8903b_resume: resume
  1371. <3>msm_wm8958_setup_power: codec power setup
  1372. <4>8058_s3: Failed to create debugfs directory
  1373. <3>wm8994_ldo_power: Power up the WM8994 LDOs
  1374. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  1375. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  1376. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  1377. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  1378. <6>PM: resume of devices complete after 68.248 msecs
  1379. Restarting tasks ... done.
  1380. <6>PM: suspend exit 2014-11-24 13:30:01.015278376 UTC
  1381. <6>suspend: exit suspend, ret = 0 (2014-11-24 13:30:01.015308869 UTC)
  1382. <6>active wake lock PowerManagerService.WakeLocks
  1383. <6>active wake lock event5-500
  1384. <6>active wake lock event1-500
  1385. <6>active wake lock event0-500
  1386. <6>active wake lock power-supply
  1387. <6>healthd: battery l=96 v=4060 t=24.0 h=2 st=3 c=-43 chg=
  1388. <6>PM: suspend entry 2014-11-24 13:30:01.120306634 UTC
  1389. Freezing user space processes ... (elapsed 0.001 seconds) done.
  1390. Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
  1391. Suspending console(s) (use no_console_suspend to debug)
  1392. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  1393. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  1394. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  1395. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  1396. <3>msm_wm8958_shutdown_power: codec power shutdown
  1397. <3>wm8994_ldo_power: Power down the WM8994 LDOs
  1398. max8903b_suspend: suspend
  1399. <6>PM: suspend of devices complete after 34.865 msecs
  1400. <6>PM: late suspend of devices complete after 2.135 msecs
  1401. <6>PM: noirq suspend of devices complete after 2.806 msecs
  1402. Disabling non-boot CPUs ...
  1403. <6>msm_pm_enter
  1404. <6>msm_pm_enter: power collapse
  1405. <6>msm_mpm_irqs_detectable: cannot monitor 0000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000<6>msm_pm_enter: return
  1406. <6>PM: noirq resume of devices complete after 2.135 msecs
  1407. <6>wakeup wake lock: alarm_rtc
  1408. <6>PM: early resume of devices complete after 2.135 msecs
  1409. max8903b_resume: resume
  1410. <3>msm_wm8958_setup_power: codec power setup
  1411. <4>8058_s3: Failed to create debugfs directory
  1412. <3>wm8994_ldo_power: Power up the WM8994 LDOs
  1413. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  1414. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  1415. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  1416. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  1417. <6>PM: resume of devices complete after 68.280 msecs
  1418. Restarting tasks ... done.
  1419. <6>PM: suspend exit 2014-11-24 13:37:06.012930354 UTC
  1420. <6>suspend: exit suspend, ret = 0 (2014-11-24 13:37:06.012960847 UTC)
  1421. <6>active wake lock PowerManagerService.WakeLocks
  1422. <6>active wake lock power-supply
  1423. <6>active wake lock alarm_rtc, time left 92
  1424. <6>healthd: battery l=96 v=4060 t=24.0 h=2 st=3 c=-44 chg=
  1425. <6>PM: suspend entry 2014-11-24 13:37:18.271381100 UTC
  1426. Freezing user space processes ... (elapsed 0.004 seconds) done.
  1427. Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
  1428. Suspending console(s) (use no_console_suspend to debug)
  1429. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  1430. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  1431. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  1432. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  1433. <3>msm_wm8958_shutdown_power: codec power shutdown
  1434. <3>wm8994_ldo_power: Power down the WM8994 LDOs
  1435. max8903b_suspend: suspend
  1436. <6>PM: suspend of devices complete after 26.306 msecs
  1437. <6>PM: late suspend of devices complete after 2.136 msecs
  1438. <6>PM: noirq suspend of devices complete after 2.807 msecs
  1439. Disabling non-boot CPUs ...
  1440. <6>msm_pm_enter
  1441. <6>msm_pm_enter: power collapse
  1442. <6>msm_mpm_irqs_detectable: cannot monitor 0000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000<6>msm_pm_enter: return
  1443. <6>PM: noirq resume of devices complete after 2.136 msecs
  1444. <6>wakeup wake lock: mmc1
  1445. <6>PM: early resume of devices complete after 2.166 msecs
  1446. max8903b_resume: resume
  1447. <3>msm_wm8958_setup_power: codec power setup
  1448. <4>8058_s3: Failed to create debugfs directory
  1449. <3>wm8994_ldo_power: Power up the WM8994 LDOs
  1450. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  1451. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  1452. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  1453. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  1454. <6>PM: resume of devices complete after 72.785 msecs
  1455. Restarting tasks ... done.
  1456. <6>PM: suspend exit 2014-11-24 13:37:25.008019942 UTC
  1457. <6>suspend: exit suspend, ret = 0 (2014-11-24 13:37:25.008050436 UTC)
  1458. <6>active wake lock power-supply
  1459. <6>PM: suspend entry 2014-11-24 13:37:25.040007496 UTC
  1460. <6>healthd: battery l=96 v=4060 t=24.0 h=2 st=3 c=-44 chg=
  1461. Freezing user space processes ... (elapsed 0.001 seconds) done.
  1462. Freezing remaining freezable tasks ... (elapsed 0.002 seconds) done.
  1463. Suspending console(s) (use no_console_suspend to debug)
  1464. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  1465. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  1466. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  1467. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  1468. <3>msm_wm8958_shutdown_power: codec power shutdown
  1469. <3>wm8994_ldo_power: Power down the WM8994 LDOs
  1470. max8903b_suspend: suspend
  1471. <6>PM: suspend of devices complete after 60.956 msecs
  1472. <6>PM: late suspend of devices complete after 2.166 msecs
  1473. <6>PM: noirq suspend of devices complete after 2.837 msecs
  1474. Disabling non-boot CPUs ...
  1475. <6>msm_pm_enter
  1476. <6>msm_pm_enter: power collapse
  1477. <6>msm_mpm_irqs_detectable: cannot monitor 0000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000<6>msm_pm_enter: return
  1478. <6>PM: noirq resume of devices complete after 2.196 msecs
  1479. <6>wakeup wake lock: mmc1
  1480. <6>PM: early resume of devices complete after 2.135 msecs
  1481. max8903b_resume: resume
  1482. <3>msm_wm8958_setup_power: codec power setup
  1483. <4>8058_s3: Failed to create debugfs directory
  1484. <3>wm8994_ldo_power: Power up the WM8994 LDOs
  1485. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  1486. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  1487. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  1488. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  1489. <6>PM: resume of devices complete after 73.649 msecs
  1490. Restarting tasks ... done.
  1491. <6>PM: suspend exit 2014-11-24 13:37:33.007319299 UTC
  1492. <6>suspend: exit suspend, ret = 0 (2014-11-24 13:37:33.007349796 UTC)
  1493. <6>active wake lock power-supply
  1494. <6>PM: suspend entry 2014-11-24 13:37:33.051171979 UTC
  1495. <6>healthd: battery l=96 v=4060 t=24.0 h=2 st=3 c=-41 chg=
  1496. Freezing user space processes ... (elapsed 0.001 seconds) done.
  1497. Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
  1498. Suspending console(s) (use no_console_suspend to debug)
  1499. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  1500. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  1501. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  1502. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  1503. <3>msm_wm8958_shutdown_power: codec power shutdown
  1504. <3>wm8994_ldo_power: Power down the WM8994 LDOs
  1505. max8903b_suspend: suspend
  1506. <6>PM: suspend of devices complete after 28.520 msecs
  1507. <6>PM: late suspend of devices complete after 2.135 msecs
  1508. <6>PM: noirq suspend of devices complete after 2.928 msecs
  1509. Disabling non-boot CPUs ...
  1510. <6>msm_pm_enter
  1511. <6>msm_pm_enter: power collapse
  1512. <6>msm_mpm_irqs_detectable: cannot monitor 0000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000<6>msm_pm_enter: return
  1513. <6>PM: noirq resume of devices complete after 2.135 msecs
  1514. <6>wakeup wake lock: mmc1
  1515. <6>PM: early resume of devices complete after 2.135 msecs
  1516. max8903b_resume: resume
  1517. <3>msm_wm8958_setup_power: codec power setup
  1518. <4>8058_s3: Failed to create debugfs directory
  1519. <3>wm8994_ldo_power: Power up the WM8994 LDOs
  1520. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  1521. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  1522. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  1523. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  1524. <6>PM: resume of devices complete after 72.092 msecs
  1525. Restarting tasks ... done.
  1526. <6>PM: suspend exit 2014-11-24 13:42:25.012899893 UTC
  1527. <6>suspend: exit suspend, ret = 0 (2014-11-24 13:42:25.012930390 UTC)
  1528. <6>active wake lock PowerManagerService.WakeLocks
  1529. <6>active wake lock power-supply
  1530. <6>healthd: battery l=96 v=4056 t=24.0 h=2 st=3 c=-42 chg=
  1531. <6>PM: suspend entry 2014-11-24 13:42:25.080658197 UTC
  1532. Freezing user space processes ... (elapsed 0.001 seconds) done.
  1533. Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
  1534. Suspending console(s) (use no_console_suspend to debug)
  1535. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  1536. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  1537. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  1538. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  1539. <3>msm_wm8958_shutdown_power: codec power shutdown
  1540. <3>wm8994_ldo_power: Power down the WM8994 LDOs
  1541. max8903b_suspend: suspend
  1542. <6>PM: suspend of devices complete after 28.579 msecs
  1543. <6>PM: late suspend of devices complete after 2.135 msecs
  1544. <6>PM: noirq suspend of devices complete after 2.836 msecs
  1545. Disabling non-boot CPUs ...
  1546. <6>msm_pm_enter
  1547. <6>msm_pm_enter: power collapse
  1548. <6>msm_mpm_irqs_detectable: cannot monitor 0000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000<6>msm_pm_enter: return
  1549. <6>PM: noirq resume of devices complete after 2.165 msecs
  1550. <6>wakeup wake lock: mmc1
  1551. <6>PM: early resume of devices complete after 2.165 msecs
  1552. max8903b_resume: resume
  1553. <3>msm_wm8958_setup_power: codec power setup
  1554. <4>8058_s3: Failed to create debugfs directory
  1555. <3>wm8994_ldo_power: Power up the WM8994 LDOs
  1556. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  1557. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  1558. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  1559. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  1560. <6>PM: resume of devices complete after 72.396 msecs
  1561. Restarting tasks ... done.
  1562. <6>PM: suspend exit 2014-11-24 13:42:35.007258393 UTC
  1563. <6>suspend: exit suspend, ret = 0 (2014-11-24 13:42:35.007288890 UTC)
  1564. <6>active wake lock power-supply
  1565. <6>PM: suspend entry 2014-11-24 13:42:35.041749956 UTC
  1566. <6>healthd: battery l=96 v=4060 t=24.0 h=2 st=3 c=-47 chg=
  1567. Freezing user space processes ... (elapsed 0.001 seconds) done.
  1568. Freezing remaining freezable tasks ... (elapsed 0.002 seconds) done.
  1569. Suspending console(s) (use no_console_suspend to debug)
  1570. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  1571. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  1572. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  1573. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  1574. <3>msm_wm8958_shutdown_power: codec power shutdown
  1575. <3>wm8994_ldo_power: Power down the WM8994 LDOs
  1576. max8903b_suspend: suspend
  1577. <6>PM: suspend of devices complete after 34.931 msecs
  1578. <6>PM: late suspend of devices complete after 2.227 msecs
  1579. <6>PM: noirq suspend of devices complete after 2.837 msecs
  1580. Disabling non-boot CPUs ...
  1581. <6>msm_pm_enter
  1582. <6>msm_pm_enter: power collapse
  1583. <6>msm_mpm_irqs_detectable: cannot monitor 0000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000<6>msm_pm_enter: return
  1584. <6>PM: noirq resume of devices complete after 2.135 msecs
  1585. <6>wakeup wake lock: alarm_rtc
  1586. <6>PM: early resume of devices complete after 2.135 msecs
  1587. max8903b_resume: resume
  1588. <3>msm_wm8958_setup_power: codec power setup
  1589. <4>8058_s3: Failed to create debugfs directory
  1590. <3>wm8994_ldo_power: Power up the WM8994 LDOs
  1591. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  1592. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  1593. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  1594. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  1595. <6>PM: resume of devices complete after 68.161 msecs
  1596. Restarting tasks ... done.
  1597. <6>PM: suspend exit 2014-11-24 13:45:01.015674760 UTC
  1598. <6>suspend: exit suspend, ret = 0 (2014-11-24 13:45:01.015705251 UTC)
  1599. <6>active wake lock PowerManagerService.WakeLocks
  1600. <6>active wake lock event5-500
  1601. <6>active wake lock event1-500
  1602. <6>active wake lock event0-500
  1603. <6>active wake lock power-supply
  1604. <6>healthd: battery l=96 v=4060 t=24.0 h=2 st=3 c=-41 chg=
  1605. <6>PM: suspend entry 2014-11-24 13:45:01.216833318 UTC
  1606. Freezing user space processes ... (elapsed 0.005 seconds) done.
  1607. Freezing remaining freezable tasks ... (elapsed 0.002 seconds) done.
  1608. Suspending console(s) (use no_console_suspend to debug)
  1609. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  1610. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  1611. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  1612. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  1613. <3>msm_wm8958_shutdown_power: codec power shutdown
  1614. <3>wm8994_ldo_power: Power down the WM8994 LDOs
  1615. max8903b_suspend: suspend
  1616. <6>PM: suspend of devices complete after 42.095 msecs
  1617. <6>PM: late suspend of devices complete after 2.135 msecs
  1618. <6>PM: noirq suspend of devices complete after 2.836 msecs
  1619. Disabling non-boot CPUs ...
  1620. <6>msm_pm_enter
  1621. <6>msm_pm_enter: power collapse
  1622. <6>msm_mpm_irqs_detectable: cannot monitor 0000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000<6>msm_pm_enter: return
  1623. <6>PM: noirq resume of devices complete after 2.165 msecs
  1624. <6>wakeup wake lock: gpio_input
  1625. <6>PM: early resume of devices complete after 2.135 msecs
  1626. max8903b_resume: resume
  1627. <3>msm_wm8958_setup_power: codec power setup
  1628. <4>8058_s3: Failed to create debugfs directory
  1629. <3>wm8994_ldo_power: Power up the WM8994 LDOs
  1630. <6>gpio_keys_scan_keys: key 1-ac, 2 (40) changed to 1
  1631. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  1632. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  1633. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  1634. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  1635. <6>PM: resume of devices complete after 68.188 msecs
  1636. Restarting tasks ... done.
  1637. <6>PM: suspend exit 2014-11-24 13:57:25.014150876 UTC
  1638. <6>suspend: exit suspend, ret = 0 (2014-11-24 13:57:25.014181374 UTC)
  1639. <6>gpio_keys_scan_keys: key 1-ac, 2 (40) changed to 0
  1640. <6>healthd: battery l=96 v=4056 t=23.0 h=2 st=3 c=-43 chg=
  1641. <6>lsm303dlh_acc_sysfs: hw init start
  1642. <6>request_suspend_state: wakeup (3->0) at 2170329360702 (2014-11-24 13:57:25.067972925 UTC)
  1643. <6>lsm303dlh_acc_sysfs: hw init done
  1644. <6>[MPDEC]: Screen -> on. Activated mpdecision. | Mask=[1000]
  1645. <3>[DISP] lcdc_panel_power: ++ 1
  1646. <4>mdp4_csc_config: Block type 10 isn't supported by CSC.
  1647. <4>mdp4_csc_config: Block type 8 isn't supported by CSC.
  1648. <6>mdp4_overlay_mdp_perf_upd mdp clk is changed [1] from 0 to 128000000
  1649. <3>[DISP] lcdc_tenderloin_panel_set_backlight: 61
  1650. <6>pil pil0: q6: Brought out of reset
  1651. <6>apr_tal:Q6 Is Up
  1652. <6>apr_tal: SMD_EVENT_OPEN
  1653. <6>msm_device_put:device speaker_stereo_rx set 0
  1654. <6>msm_device_put:device speaker_stereo_rx set 1
  1655. <3>msm_device_put:device freq =48000
  1656. <3>Device active
  1657. <5>type=1400 audit(1416837454.788:14): avc:  denied  { read write } for  pid=1096 comm="Binder_4" path="socket:[122771]" dev="sockfs" ino=122771 scontext=u:r:untrusted_app:s0 tcontext=u:r:init:s0 tclass=unix_stream_socket
  1658. <6>msm_device_put:device speaker_stereo_rx set 0
  1659. <6>healthd: battery l=95 v=4017 t=24.0 h=2 st=3 c=-626 chg=
  1660. <6>healthd: battery l=95 v=4012 t=24.0 h=2 st=3 c=-626 chg=
  1661. <6>healthd: battery l=95 v=4008 t=24.0 h=2 st=3 c=-629 chg=
  1662. <6>healthd: battery l=95 v=4008 t=24.0 h=2 st=3 c=-627 chg=
  1663. <6>healthd: battery l=94 v=4003 t=25.0 h=2 st=3 c=-656 chg=
  1664. <6>healthd: battery l=94 v=3998 t=25.0 h=2 st=3 c=-656 chg=
  1665. <6>healthd: battery l=94 v=3993 t=25.0 h=2 st=3 c=-657 chg=
  1666. <6>healthd: battery l=94 v=3993 t=25.0 h=2 st=3 c=-657 chg=
  1667. <6>healthd: battery l=93 v=3988 t=25.0 h=2 st=3 c=-657 chg=
  1668. <6>gpio_keys_scan_keys: key 1-ac, 2 (40) changed to 1
  1669. <6>gpio_keys_scan_keys: key 1-ac, 2 (40) changed to 0
  1670. <3>[DISP] lcdc_tenderloin_panel_set_backlight: 0
  1671. <3>[DISP] lcdc_panel_power: ++ 0
  1672. <6>request_suspend_state: sleep (0->3) at 2863851250623 (2014-11-24 14:08:58.589862846 UTC)
  1673. <6>[MPDEC]: Screen -> off. Deactivated mpdecision.
  1674. <6>msm_device_put:device speaker_stereo_rx set 0
  1675. <6>msm_device_put:device speaker_stereo_rx set 1
  1676. <3>msm_device_put:device freq =48000
  1677. <3>Device active
  1678. <6>msm_device_put:device speaker_stereo_rx set 0
  1679. <6>PM: suspend entry 2014-11-24 14:09:02.292743698 UTC
  1680. Freezing user space processes ... (elapsed 0.100 seconds) done.
  1681. Freezing remaining freezable tasks ... (elapsed 0.002 seconds) done.
  1682. Suspending console(s) (use no_console_suspend to debug)
  1683. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  1684. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  1685. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  1686. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  1687. <3>msm_wm8958_shutdown_power: codec power shutdown
  1688. <3>wm8994_ldo_power: Power down the WM8994 LDOs
  1689. max8903b_suspend: suspend
  1690. <6>PM: suspend of devices complete after 235.717 msecs
  1691. <6>PM: late suspend of devices complete after 5.371 msecs
  1692. <6>PM: noirq suspend of devices complete after 7.324 msecs
  1693. Disabling non-boot CPUs ...
  1694. <6>msm_pm_enter
  1695. <6>msm_pm_enter: power collapse
  1696. <6>msm_mpm_irqs_detectable: cannot monitor 0000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000<6>msm_pm_enter: return
  1697. <6>PM: noirq resume of devices complete after 4.791 msecs
  1698. <6>wakeup wake lock: alarm_rtc
  1699. <6>PM: early resume of devices complete after 4.821 msecs
  1700. max8903b_resume: resume
  1701. <3>msm_wm8958_setup_power: codec power setup
  1702. <4>8058_s3: Failed to create debugfs directory
  1703. <3>wm8994_ldo_power: Power up the WM8994 LDOs
  1704. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  1705. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  1706. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  1707. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  1708. <6>PM: resume of devices complete after 76.292 msecs
  1709. Restarting tasks ... done.
  1710. <6>PM: suspend exit 2014-11-24 14:09:31.018600277 UTC
  1711. <6>suspend: exit suspend, ret = 0 (2014-11-24 14:09:31.018630769 UTC)
  1712. <6>healthd: battery l=93 v=4022 t=25.0 h=2 st=3 c=-34 chg=
  1713. <6>PM: suspend entry 2014-11-24 14:09:37.282213520 UTC
  1714. Freezing user space processes ... (elapsed 0.008 seconds) done.
  1715. Freezing remaining freezable tasks ... (elapsed 0.002 seconds) done.
  1716. Suspending console(s) (use no_console_suspend to debug)
  1717. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  1718. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  1719. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  1720. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  1721. <3>msm_wm8958_shutdown_power: codec power shutdown
  1722. <3>wm8994_ldo_power: Power down the WM8994 LDOs
  1723. max8903b_suspend: suspend
  1724. <6>PM: suspend of devices complete after 227.386 msecs
  1725. <6>PM: late suspend of devices complete after 5.340 msecs
  1726. <6>PM: noirq suspend of devices complete after 6.988 msecs
  1727. Disabling non-boot CPUs ...
  1728. <6>msm_pm_enter
  1729. <6>msm_pm_enter: power collapse
  1730. <6>msm_mpm_irqs_detectable: cannot monitor 0000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000<6>msm_pm_enter: return
  1731. <6>PM: noirq resume of devices complete after 5.279 msecs
  1732. <6>wakeup wake lock: mmc1
  1733. <6>PM: early resume of devices complete after 5.279 msecs
  1734. max8903b_resume: resume
  1735. <3>msm_wm8958_setup_power: codec power setup
  1736. <4>8058_s3: Failed to create debugfs directory
  1737. <3>wm8994_ldo_power: Power up the WM8994 LDOs
  1738. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  1739. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  1740. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  1741. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  1742. <6>PM: resume of devices complete after 80.071 msecs
  1743. Restarting tasks ... done.
  1744. <6>PM: suspend exit 2014-11-24 14:09:51.012045358 UTC
  1745. <6>suspend: exit suspend, ret = 0 (2014-11-24 14:09:51.012045358 UTC)
  1746. <6>active wake lock power-supply
  1747. <6>PM: suspend entry 2014-11-24 14:09:51.048576337 UTC
  1748. <6>healthd: battery l=93 v=4022 t=25.0 h=2 st=3 c=-33 chg=
  1749. Freezing user space processes ... (elapsed 0.001 seconds) done.
  1750. Freezing remaining freezable tasks ... (elapsed 0.002 seconds) done.
  1751. Suspending console(s) (use no_console_suspend to debug)
  1752. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  1753. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  1754. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  1755. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  1756. <3>msm_wm8958_shutdown_power: codec power shutdown
  1757. <3>wm8994_ldo_power: Power down the WM8994 LDOs
  1758. max8903b_suspend: suspend
  1759. <6>PM: suspend of devices complete after 228.009 msecs
  1760. <6>PM: late suspend of devices complete after 5.185 msecs
  1761. <6>PM: noirq suspend of devices complete after 6.985 msecs
  1762. Disabling non-boot CPUs ...
  1763. <6>msm_pm_enter
  1764. <6>msm_pm_enter: power collapse
  1765. <6>msm_mpm_irqs_detectable: cannot monitor 0000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000<6>msm_pm_enter: return
  1766. <6>PM: noirq resume of devices complete after 5.277 msecs
  1767. <6>wakeup wake lock: mmc1
  1768. <6>PM: early resume of devices complete after 5.277 msecs
  1769. max8903b_resume: resume
  1770. <3>msm_wm8958_setup_power: codec power setup
  1771. <4>8058_s3: Failed to create debugfs directory
  1772. <3>wm8994_ldo_power: Power up the WM8994 LDOs
  1773. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  1774. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  1775. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  1776. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  1777. <6>PM: resume of devices complete after 77.336 msecs
  1778. Restarting tasks ... done.
  1779. <6>PM: suspend exit 2014-11-24 14:09:54.006923262 UTC
  1780. <6>suspend: exit suspend, ret = 0 (2014-11-24 14:09:54.006923262 UTC)
  1781. <6>active wake lock power-supply
  1782. <6>PM: suspend entry 2014-11-24 14:09:54.043457015 UTC
  1783. Freezing user space processes ... (elapsed 0.023 seconds) done.
  1784. Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
  1785. Suspending console(s) (use no_console_suspend to debug)
  1786. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  1787. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  1788. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  1789. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  1790. <3>msm_wm8958_shutdown_power: codec power shutdown
  1791. <3>wm8994_ldo_power: Power down the WM8994 LDOs
  1792. max8903b_suspend: suspend
  1793. <6>PM: suspend of devices complete after 207.873 msecs
  1794. <6>PM: late suspend of devices complete after 5.217 msecs
  1795. <6>PM: noirq suspend of devices complete after 6.956 msecs
  1796. Disabling non-boot CPUs ...
  1797. <6>msm_pm_enter
  1798. <6>msm_pm_enter: power collapse
  1799. <6>msm_mpm_irqs_detectable: cannot monitor 0000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000<6>msm_pm_enter: return
  1800. <6>PM: noirq resume of devices complete after 5.247 msecs
  1801. <6>wakeup wake lock: mmc1
  1802. <6>PM: early resume of devices complete after 5.278 msecs
  1803. max8903b_resume: resume
  1804. <3>msm_wm8958_setup_power: codec power setup
  1805. <4>8058_s3: Failed to create debugfs directory
  1806. <3>wm8994_ldo_power: Power up the WM8994 LDOs
  1807. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  1808. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  1809. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  1810. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  1811. <6>PM: resume of devices complete after 79.749 msecs
  1812. Restarting tasks ... done.
  1813. <6>PM: suspend exit 2014-11-24 14:13:35.012412616 UTC
  1814. <6>suspend: exit suspend, ret = 0 (2014-11-24 14:13:35.012443114 UTC)
  1815. <6>active wake lock PowerManagerService.WakeLocks
  1816. <6>active wake lock power-supply
  1817. <6>healthd: battery l=93 v=4017 t=25.0 h=2 st=3 c=-33 chg=
  1818. <6>healthd: battery l=93 v=4027 t=25.0 h=2 st=3 c=-33 chg=
  1819. <6>PM: suspend entry 2014-11-24 14:13:35.090907365 UTC
  1820. Freezing user space processes ... (elapsed 0.001 seconds) done.
  1821. Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
  1822. Suspending console(s) (use no_console_suspend to debug)
  1823. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  1824. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  1825. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  1826. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  1827. <3>msm_wm8958_shutdown_power: codec power shutdown
  1828. <3>wm8994_ldo_power: Power down the WM8994 LDOs
  1829. max8903b_suspend: suspend
  1830. <6>PM: suspend of devices complete after 206.764 msecs
  1831. <6>PM: late suspend of devices complete after 5.217 msecs
  1832. <6>PM: noirq suspend of devices complete after 7.017 msecs
  1833. Disabling non-boot CPUs ...
  1834. <6>msm_pm_enter
  1835. <6>msm_pm_enter: power collapse
  1836. <6>msm_mpm_irqs_detectable: cannot monitor 0000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000<6>msm_pm_enter: return
  1837. <6>PM: noirq resume of devices complete after 5.369 msecs
  1838. <6>wakeup wake lock: alarm_rtc
  1839. <6>PM: early resume of devices complete after 5.278 msecs
  1840. max8903b_resume: resume
  1841. <3>msm_wm8958_setup_power: codec power setup
  1842. <4>8058_s3: Failed to create debugfs directory
  1843. <3>wm8994_ldo_power: Power up the WM8994 LDOs
  1844. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  1845. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  1846. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  1847. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  1848. <6>PM: resume of devices complete after 76.788 msecs
  1849. Restarting tasks ... done.
  1850. <6>PM: suspend exit 2014-11-24 14:14:52.013175169 UTC
  1851. <6>suspend: exit suspend, ret = 0 (2014-11-24 14:14:52.013205667 UTC)
  1852. <6>active wake lock PowerManagerService.WakeLocks
  1853. <6>active wake lock power-supply
  1854. <6>healthd: battery l=93 v=4027 t=25.0 h=2 st=3 c=-42 chg=
  1855. <6>PM: suspend entry 2014-11-24 14:15:21.321003145 UTC
  1856. Freezing user space processes ... (elapsed 0.009 seconds) done.
  1857. Freezing remaining freezable tasks ... (elapsed 0.002 seconds) done.
  1858. Suspending console(s) (use no_console_suspend to debug)
  1859. <3>dpm_run_callback(): platform_pm_suspend+0x0/0x54 returns -16
  1860. <3>PM: Device alarm failed to suspend: error -16
  1861. <3>PM: Some devices failed to suspend
  1862. <6>PM: resume of devices complete after 7.019 msecs
  1863. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  1864. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  1865. <3>msm_wm8958_shutdown_power: codec power shutdown
  1866. <3>wm8994_ldo_power: Power down the WM8994 LDOs
  1867. <3>msm_wm8958_setup_power: codec power setup
  1868. <4>8058_s3: Failed to create debugfs directory
  1869. <3>wm8994_ldo_power: Power up the WM8994 LDOs
  1870. Restarting tasks ... done.
  1871. <6>PM: suspend exit 2014-11-24 14:15:21.821430381 UTC
  1872. <6>suspend: exit suspend, ret = -16 (2014-11-24 14:15:21.821460899 UTC)
  1873. <6>PM: suspend entry 2014-11-24 14:15:22.131183801 UTC
  1874. Freezing user space processes ... (elapsed 0.096 seconds) done.
  1875. Freezing remaining freezable tasks ... (elapsed 0.002 seconds) done.
  1876. Suspending console(s) (use no_console_suspend to debug)
  1877. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  1878. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  1879. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  1880. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  1881. <3>msm_wm8958_shutdown_power: codec power shutdown
  1882. <3>wm8994_ldo_power: Power down the WM8994 LDOs
  1883. max8903b_suspend: suspend
  1884. <6>PM: suspend of devices complete after 227.355 msecs
  1885. <6>PM: late suspend of devices complete after 5.340 msecs
  1886. <6>PM: noirq suspend of devices complete after 7.019 msecs
  1887. Disabling non-boot CPUs ...
  1888. <6>msm_pm_enter
  1889. <6>msm_pm_enter: power collapse
  1890. <6>msm_mpm_irqs_detectable: cannot monitor 0000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000000<6>msm_pm_enter: return
  1891. <6>PM: noirq resume of devices complete after 5.279 msecs
  1892. <6>wakeup wake lock: gpio_input
  1893. <6>PM: early resume of devices complete after 5.310 msecs
  1894. max8903b_resume: resume
  1895. <6>gpio_keys_scan_keys: key 1-ac, 2 (40) changed to 1
  1896. <3>msm_wm8958_setup_power: codec power setup
  1897. <4>8058_s3: Failed to create debugfs directory
  1898. <3>wm8994_ldo_power: Power up the WM8994 LDOs
  1899. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  1900. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  1901. <7>lm8502_mod_brightness: set LED1 brightness (0) percent
  1902. <7>lm8502_mod_brightness: set LED2 brightness (0) percent
  1903. <6>PM: resume of devices complete after 84.334 msecs
  1904. Restarting tasks ... done.
  1905. <6>PM: suspend exit 2014-11-24 14:16:32.022535429 UTC
  1906. <6>suspend: exit suspend, ret = 0 (2014-11-24 14:16:32.022565921 UTC)
  1907. <6>request_suspend_state: wakeup (3->0) at 2908014480793 (2014-11-24 14:16:32.037660290 UTC)
  1908. <6>lsm303dlh_acc_sysfs: hw init start
  1909. <6>lsm303dlh_acc_sysfs: hw init done
  1910. <6>healthd: battery l=93 v=4027 t=25.0 h=2 st=3 c=-33 chg=
  1911. <6>[MPDEC]: Screen -> on. Activated mpdecision. | Mask=[1000]
  1912. <3>[DISP] lcdc_panel_power: ++ 1
  1913. <6>gpio_keys_scan_keys: key 1-ac, 2 (40) changed to 0
  1914. <4>mdp4_csc_config: Block type 10 isn't supported by CSC.
  1915. <4>mdp4_csc_config: Block type 8 isn't supported by CSC.
  1916. <6>mdp4_overlay_mdp_perf_upd mdp clk is changed [1] from 0 to 128000000
  1917. <3>[DISP] lcdc_tenderloin_panel_set_backlight: 61
  1918. <6>msm_device_put:device speaker_stereo_rx set 0
  1919. <6>msm_device_put:device speaker_stereo_rx set 1
  1920. <3>msm_device_put:device freq =48000
  1921. <3>Device active
  1922. <6>msm_device_put:device speaker_stereo_rx set 0
  1923. <3>jack_notifier_event: event!
  1924. <6>msm_device_put:device speaker_stereo_rx set 0
  1925. <6>msm_device_put:device speaker_stereo_rx set 1
  1926. <3>msm_device_put:device freq =48000
  1927. <3>Device active
  1928. <6>msm_device_put:device speaker_stereo_rx set 0
  1929. <6>healthd: battery l=92 v=3979 t=27.0 h=2 st=3 c=-622 chg=
  1930. <6>msm_device_put:device speaker_stereo_rx set 0
  1931. <6>msm_device_put:device speaker_stereo_rx set 1
  1932. <3>msm_device_put:device freq =48000
  1933. <3>Device active
  1934. <6>healthd: battery l=91 v=3974 t=27.0 h=2 st=3 c=-714 chg=
  1935. <6>healthd: battery l=91 v=3974 t=27.0 h=2 st=3 c=-716 chg=
  1936. <6>healthd: battery l=91 v=3969 t=27.0 h=2 st=3 c=-718 chg=
  1937. <6>healthd: battery l=91 v=3969 t=27.0 h=2 st=3 c=-715 chg=
  1938. <6>msm_device_put:device speaker_stereo_rx set 0
  1939. <6>healthd: battery l=91 v=3974 t=27.0 h=2 st=3 c=-636 chg=
  1940. <6>healthd: battery l=91 v=3974 t=27.0 h=2 st=3 c=-623 chg=
  1941. <6>healthd: battery l=91 v=3974 t=27.0 h=2 st=3 c=-623 chg=
  1942. <6>healthd: battery l=91 v=3974 t=27.0 h=2 st=3 c=-632 chg=
  1943. <6>healthd: battery l=91 v=3974 t=27.0 h=2 st=3 c=-623 chg=
  1944. <6>healthd: battery l=91 v=3974 t=27.0 h=2 st=3 c=-622 chg=
  1945. <6>healthd: battery l=91 v=3974 t=27.0 h=2 st=3 c=-623 chg=
  1946. <6>healthd: battery l=91 v=3969 t=27.0 h=2 st=3 c=-676 chg=
  1947. <6>healthd: battery l=91 v=3969 t=27.0 h=2 st=3 c=-623 chg=
  1948. <6>healthd: battery l=91 v=3969 t=27.0 h=2 st=3 c=-622 chg=
  1949. <6>healthd: battery l=91 v=3969 t=27.0 h=2 st=3 c=-623 chg=
  1950. <6>healthd: battery l=90 v=3969 t=27.0 h=2 st=3 c=-623 chg=
  1951. <6>healthd: battery l=90 v=3964 t=27.0 h=2 st=3 c=-624 chg=
  1952. <6>healthd: battery l=90 v=3969 t=27.0 h=2 st=3 c=-624 chg=
  1953. <3>jack_notifier_event: event!
  1954. <2>MIC DETECT: DISABLE. Jack removed
  1955. <3>wm8994-codec wm8994-codec:   Reporting headphone removed
  1956. <6>healthd: battery l=90 v=3969 t=27.0 h=2 st=3 c=-680 chg=
  1957. <6>healthd: battery l=90 v=3969 t=27.0 h=2 st=3 c=-680 chg=
  1958. <6>healthd: battery l=90 v=3969 t=27.0 h=2 st=3 c=-622 chg=
  1959. <6>healthd: battery l=90 v=3969 t=27.0 h=2 st=3 c=-681 chg=
  1960. <6>healthd: battery l=90 v=3969 t=27.0 h=2 st=3 c=-622 chg=
  1961. <6>healthd: battery l=90 v=3969 t=27.0 h=2 st=3 c=-626 chg=
  1962. <6>healthd: battery l=90 v=3964 t=27.0 h=2 st=3 c=-622 chg=
  1963. <6>healthd: battery l=90 v=3964 t=27.0 h=2 st=3 c=-650 chg=
  1964. <6>healthd: battery l=90 v=3964 t=27.0 h=2 st=3 c=-624 chg=
  1965. <6>healthd: battery l=90 v=3964 t=27.0 h=2 st=3 c=-622 chg=
  1966. <6>healthd: battery l=90 v=3964 t=27.0 h=2 st=3 c=-622 chg=
  1967. <6>healthd: battery l=90 v=3964 t=27.0 h=2 st=3 c=-622 chg=
  1968. <6>healthd: battery l=90 v=3964 t=27.0 h=2 st=3 c=-624 chg=
  1969. <6>healthd: battery l=90 v=3964 t=27.0 h=2 st=3 c=-622 chg=
  1970. <6>healthd: battery l=90 v=3964 t=27.0 h=2 st=3 c=-623 chg=
  1971. <6>healthd: battery l=90 v=3960 t=27.0 h=2 st=3 c=-630 chg=
  1972. <6>healthd: battery l=90 v=3960 t=28.0 h=2 st=3 c=-650 chg=
  1973. <6>healthd: battery l=90 v=3960 t=28.0 h=2 st=3 c=-622 chg=
  1974. <6>healthd: battery l=90 v=3960 t=28.0 h=2 st=3 c=-622 chg=
  1975. <6>healthd: battery l=90 v=3960 t=28.0 h=2 st=3 c=-623 chg=
  1976. <6>healthd: battery l=90 v=3955 t=28.0 h=2 st=3 c=-623 chg=
  1977. <6>healthd: battery l=89 v=3960 t=28.0 h=2 st=3 c=-623 chg=
  1978. <6>healthd: battery l=89 v=3960 t=28.0 h=2 st=3 c=-622 chg=
  1979. <6>healthd: battery l=89 v=3960 t=28.0 h=2 st=3 c=-622 chg=
  1980. <6>healthd: battery l=89 v=3960 t=28.0 h=2 st=3 c=-622 chg=
  1981. <6>healthd: battery l=89 v=3960 t=28.0 h=2 st=3 c=-622 chg=
  1982. <6>healthd: battery l=89 v=3960 t=28.0 h=2 st=3 c=-633 chg=
  1983. <6>healthd: battery l=89 v=3955 t=28.0 h=2 st=3 c=-623 chg=
  1984. <6>healthd: battery l=89 v=3955 t=28.0 h=2 st=3 c=-623 chg=
  1985. <6>healthd: battery l=89 v=3955 t=28.0 h=2 st=3 c=-623 chg=
  1986. <6>healthd: battery l=89 v=3950 t=28.0 h=2 st=3 c=-623 chg=
  1987. <6>healthd: battery l=89 v=3955 t=28.0 h=2 st=3 c=-622 chg=
  1988. <6>healthd: battery l=89 v=3955 t=28.0 h=2 st=3 c=-623 chg=
  1989. <6>healthd: battery l=89 v=3955 t=28.0 h=2 st=3 c=-622 chg=
  1990. <6>healthd: battery l=89 v=3955 t=28.0 h=2 st=3 c=-623 chg=
  1991. <6>healthd: battery l=89 v=3955 t=28.0 h=2 st=3 c=-623 chg=
  1992. <6>healthd: battery l=89 v=3955 t=28.0 h=2 st=3 c=-623 chg=
  1993. <6>healthd: battery l=89 v=3950 t=28.0 h=2 st=3 c=-623 chg=
  1994. <6>healthd: battery l=88 v=3950 t=28.0 h=2 st=3 c=-625 chg=
  1995. <6>healthd: battery l=88 v=3950 t=28.0 h=2 st=3 c=-624 chg=
  1996. <6>healthd: battery l=88 v=3950 t=28.0 h=2 st=3 c=-623 chg=
  1997. <6>healthd: battery l=88 v=3950 t=28.0 h=2 st=3 c=-623 chg=
  1998. <6>healthd: battery l=88 v=3950 t=28.0 h=2 st=3 c=-625 chg=
  1999. <6>healthd: battery l=88 v=3945 t=28.0 h=2 st=3 c=-628 chg=
  2000. <6>healthd: battery l=88 v=3950 t=28.0 h=2 st=3 c=-624 chg=
  2001. <6>healthd: battery l=88 v=3950 t=28.0 h=2 st=3 c=-624 chg=
  2002. <6>healthd: battery l=88 v=3950 t=28.0 h=2 st=3 c=-624 chg=
  2003. <3>jack_notifier_event: event!
  2004. <6>healthd: battery l=88 v=3950 t=28.0 h=2 st=3 c=-630 chg=
  2005. <6>msm_device_put:device speaker_stereo_rx set 0
  2006. <6>msm_device_put:device speaker_stereo_rx set 1
  2007. <3>msm_device_put:device freq =48000
  2008. <3>Device active
  2009. <6>healthd: battery l=88 v=3945 t=28.0 h=2 st=3 c=-723 chg=
  2010. <6>healthd: battery l=88 v=3940 t=28.0 h=2 st=3 c=-720 chg=
  2011. <6>healthd: battery l=88 v=3940 t=28.0 h=2 st=3 c=-722 chg=
  2012. <6>msm_device_put:device speaker_stereo_rx set 0
  2013. <6>healthd: battery l=88 v=3945 t=28.0 h=2 st=3 c=-651 chg=
  2014. <6>msm_device_put:device speaker_stereo_rx set 0
  2015. <6>msm_device_put:device speaker_stereo_rx set 1
  2016. <3>msm_device_put:device freq =48000
  2017. <3>Device active
  2018. <6>healthd: battery l=88 v=3940 t=28.0 h=2 st=3 c=-683 chg=
  2019. <3>jack_notifier_event: event!
  2020. <2>MIC DETECT: DISABLE. Jack removed
  2021. <3>wm8994-codec wm8994-codec:   Reporting headphone removed
  2022. <3>jack_notifier_event: event!
  2023. <4>------------[ cut here ]------------
  2024. <4>WARNING: at ../../../../../../kernel/htc/msm8960/sound/soc/codecs/wm8994.c:3781 wm8958_mic_detect+0xec/0x1a0()
  2025. [<80014c60>] (unwind_backtrace+0x0/0x11c) from [<80078188>] (warn_slowpath_common+0x48/0x60)
  2026. [<80078188>] (warn_slowpath_common+0x48/0x60) from [<80078258>] (warn_slowpath_null+0x18/0x1c)
  2027. [<80078258>] (warn_slowpath_null+0x18/0x1c) from [<804c9434>] (wm8958_mic_detect+0xec/0x1a0)
  2028. [<804c9434>] (wm8958_mic_detect+0xec/0x1a0) from [<804cea88>] (jack_notifier_event+0x60/0x170)
  2029. [<804cea88>] (jack_notifier_event+0x60/0x170) from [<800966fc>] (notifier_call_chain+0x38/0x68)
  2030. [<800966fc>] (notifier_call_chain+0x38/0x68) from [<80096940>] (__blocking_notifier_call_chain+0x40/0x54)
  2031. [<80096940>] (__blocking_notifier_call_chain+0x40/0x54) from [<80096968>] (blocking_notifier_call_chain+0x14/0x18)
  2032. [<80096968>] (blocking_notifier_call_chain+0x14/0x18) from [<804bf5d4>] (snd_soc_jack_report+0xb0/0xd0)
  2033. [<804bf5d4>] (snd_soc_jack_report+0xb0/0xd0) from [<8008c1bc>] (process_one_work+0x1c4/0x310)
  2034. [<8008c1bc>] (process_one_work+0x1c4/0x310) from [<8008c4b8>] (worker_thread+0x184/0x2a4)
  2035. [<8008c4b8>] (worker_thread+0x184/0x2a4) from [<800911b8>] (kthread+0xa0/0xb0)
  2036. [<800911b8>] (kthread+0xa0/0xb0) from [<8000f5f4>] (kernel_thread_exit+0x0/0x8)
  2037. <4>---[ end trace 8e42374ae981ba98 ]---
  2038. <6>msm_device_put:device speaker_stereo_rx set 0
  2039. <6>msm_device_put:device speaker_stereo_rx set 0
  2040. <6>msm_device_put:device speaker_stereo_rx set 1
  2041. <3>msm_device_put:device freq =48000
  2042. <3>Device active
  2043. <6>healthd: battery l=88 v=3940 t=28.0 h=2 st=3 c=-770 chg=
  2044. <6>gpio_keys_scan_keys: key 1-ac, 2 (40) changed to 1
  2045. <6>gpio_keys_scan_keys: key 1-ac, 2 (40) changed to 0
  2046. <6>healthd: battery l=88 v=3926 t=28.0 h=2 st=3 c=-796 chg=
  2047. <6>msm_device_put:device speaker_stereo_rx set 0
  2048. <6>aac_in_open:session id 1: NT mode encoder success
  2049. <6>aac_in_open:session id 1: success
  2050. <6>audio_in_release: session id 1
  2051. <6>msm_device_put:device speaker_stereo_rx set 0
  2052. <6>msm_device_put:device speaker_stereo_rx set 1
  2053. <3>msm_device_put:device freq =48000
  2054. <3>Device active
  2055. <6>healthd: battery l=88 v=3931 t=28.0 h=2 st=3 c=-878 chg=
  2056. <3>jack_notifier_event: event!
  2057. <2>MIC DETECT: DISABLE. Jack removed
  2058. <3>wm8994-codec wm8994-codec:   Reporting headphone removed
  2059. <6>msm_device_put:device speaker_stereo_rx set 0
  2060. <6>msm_device_put:device speaker_stereo_rx set 1
  2061. <3>msm_device_put:device freq =48000
  2062. <3>jack_notifier_event: event!
  2063. <4>------------[ cut here ]------------
  2064. <4>WARNING: at ../../../../../../kernel/htc/msm8960/sound/soc/codecs/wm8994.c:3781 wm8958_mic_detect+0xec/0x1a0()
  2065. [<80014c60>] (unwind_backtrace+0x0/0x11c) from [<80078188>] (warn_slowpath_common+0x48/0x60)
  2066. [<80078188>] (warn_slowpath_common+0x48/0x60) from [<80078258>] (warn_slowpath_null+0x18/0x1c)
  2067. [<80078258>] (warn_slowpath_null+0x18/0x1c) from [<804c9434>] (wm8958_mic_detect+0xec/0x1a0)
  2068. [<804c9434>] (wm8958_mic_detect+0xec/0x1a0) from [<804cea88>] (jack_notifier_event+0x60/0x170)
  2069. [<804cea88>] (jack_notifier_event+0x60/0x170) from [<800966fc>] (notifier_call_chain+0x38/0x68)
  2070. [<800966fc>] (notifier_call_chain+0x38/0x68) from [<80096940>] (__blocking_notifier_call_chain+0x40/0x54)
  2071. [<80096940>] (__blocking_notifier_call_chain+0x40/0x54) from [<80096968>] (blocking_notifier_call_chain+0x14/0x18)
  2072. [<80096968>] (blocking_notifier_call_chain+0x14/0x18) from [<804bf5d4>] (snd_soc_jack_report+0xb0/0xd0)
  2073. [<804bf5d4>] (snd_soc_jack_report+0xb0/0xd0) from [<8008c1bc>] (process_one_work+0x1c4/0x310)
  2074. [<8008c1bc>] (process_one_work+0x1c4/0x310) from [<8008c4b8>] (worker_thread+0x184/0x2a4)
  2075. [<8008c4b8>] (worker_thread+0x184/0x2a4) from [<800911b8>] (kthread+0xa0/0xb0)
  2076. [<800911b8>] (kthread+0xa0/0xb0) from [<8000f5f4>] (kernel_thread_exit+0x0/0x8)
  2077. <4>---[ end trace 8e42374ae981ba99 ]---
  2078. <6>msm_device_put:device speaker_stereo_rx set 0
  2079. <6>msm_device_put:device speaker_stereo_rx set 1
  2080. <3>msm_device_put:device freq =48000
  2081. <6>healthd: battery l=88 v=3940 t=29.0 h=2 st=3 c=-721 chg=
  2082. <6>healthd: battery l=88 v=3940 t=29.0 h=2 st=3 c=-699 chg=
  2083. <6>msm_device_put:device speaker_stereo_rx set 0
  2084. <6>aac_in_open:session id 1: NT mode encoder success
  2085. <6>aac_in_open:session id 1: success
  2086. <6>audio_in_release: session id 1
  2087. <6>SysRq : Emergency Remount R/O
  2088. <0>Restarting system with command ''.
  2089. <5>Going down for restart now
  2090. <6>msm_restart: Initiating reboot via bootloader
  2091.  
  2092. Broadcasting: Intent { act=com.evervolv.toolbox.action.DUMPLOGCAT_FINISHED (has extras) }
  2093. Broadcast completed: result=0
  2094.  

Reply to "Logcat: ev_tenderloin-nightly-2014.11.22"

Here you can reply to the paste above

Powered by Stikked