Evervolv Paste

Logcat: ev_tenderloin-testing-2014.01.29

From EVLogcat Uploader, 9 Years ago, written in logcat, viewed 620 times.
URL http://paste.evervolv.com/view/3e1ecfe1 Embed
Download Paste or View Raw
  1. ------ KERNEL LOG (dmesg) ------
  2. irq 293/gpio 37 triggered wake
  3. <4>[ 8275.696280] Enabling non-boot CPUs ...
  4. <3>[ 8275.762235] lsm303dlh_mag_sysfs 0-001e: read transfer error
  5. <3>[ 8275.762258] lsm303dlh_mag_sysfs 0-001e: get_magnetometer_data failed
  6. <4>[ 8275.792863] CPU1 is up
  7. <6>[ 8275.793449] PM: early resume of devices complete after 0.559 msecs
  8. <6>[ 8275.859421] wakeup wake lock: mmc_delayed_work
  9. <4>[ 8275.859979] mmc1: queuing unknown CIS tuple 0x01 (3 bytes)
  10. <4>[ 8275.860768] mmc1: queuing unknown CIS tuple 0x1a (5 bytes)
  11. <4>[ 8275.861120] mmc1: queuing unknown CIS tuple 0x1b (8 bytes)
  12. <4>[ 8275.861205] mmc1: queuing unknown CIS tuple 0x14 (0 bytes)
  13. <4>[ 8275.861519] max8903b_resume: resume
  14. <3>[ 8275.906627] pm_op(): platform_pm_resume+0x0/0x4c returns -22
  15. <3>[ 8275.906648] PM: Device kgsl-2d1.1 failed to resume: error -22
  16. <3>[ 8275.910901] msm_wm8958_setup_power: codec power setup
  17. <3>[ 8275.910946] wm8994_ldo_power: Power up the WM8994 LDOs
  18. <7>[ 8275.960657] lm8502_mod_brightness: set LED1 brightness (0) percent
  19. <7>[ 8275.961380] lm8502_mod_brightness: set LED2 brightness (0) percent
  20. <6>[ 8275.966920] PM: resume of devices complete after 173.137 msecs
  21. <4>[ 8276.176656] Restarting tasks ...
  22. <7>[ 8276.185500] lm8502_mod_brightness: set LED1 brightness (0) percent
  23. <4>[ 8276.190305] done.
  24. <6>[ 8276.192640] suspend: exit suspend, ret = 0 (2015-04-22 17:17:05.726748444 UTC)
  25. <7>[ 8276.197000] lm8502_mod_brightness: set LED2 brightness (0) percent
  26. <3>[ 8276.333002] wm8994-codec wm8994-codec: - MEOW wm8994_resume
  27. <6>[ 8276.470144] PM: Syncing filesystems ... skipped for target platform ... done.
  28. <4>[ 8276.477877] Freezing user space processes ... (elapsed 0.02 seconds) done.
  29. <4>[ 8276.506852] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  30. <4>[ 8276.526708] Suspending console(s) (use no_console_suspend to debug)
  31. <3>[ 8276.551185] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
  32. <3>[ 8276.551210] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
  33. <3>[ 8276.551231] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
  34. <3>[ 8276.569150] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
  35. <3>[ 8276.569171] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
  36. <3>[ 8276.569192] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
  37. <7>[ 8276.569733] lm8502_mod_brightness: set LED2 brightness (0) percent
  38. <7>[ 8276.570105] lm8502_mod_brightness: set LED1 brightness (0) percent
  39. <7>[ 8276.580630] lm8502_mod_brightness: set LED1 brightness (0) percent
  40. <7>[ 8276.581571] lm8502_mod_brightness: set LED2 brightness (0) percent
  41. <3>[ 8276.586053] msm_wm8958_shutdown_power: codec power shutdown
  42. <3>[ 8276.586085] wm8994_ldo_power: Power down the WM8994 LDOs
  43. <3>[ 8276.586128] wm8994 4-001a: - MEOW wm8994_device_suspend
  44. <4>[ 8276.597371] max8903b_suspend: suspend
  45. <6>[ 8276.600401] PM: suspend of devices complete after 56.774 msecs
  46. <6>[ 8276.602477] PM: late suspend of devices complete after 2.026 msecs
  47. <4>[ 8276.602505] Disabling non-boot CPUs ...
  48. <4>[ 8276.667999] gic_show_resume_irq: 48 triggered
  49. <4>[ 8276.667999] gic_show_resume_irq: 52 triggered
  50. <4>[ 8276.667999] msm_gpio_show_resume_irq: irq 293/gpio 37 triggered wake
  51. <4>[ 8276.668157] Enabling non-boot CPUs ...
  52. <4>[ 8276.763034] CPU1 is up
  53. <6>[ 8276.763783] PM: early resume of devices complete after 0.714 msecs
  54. <6>[ 8276.829885] wakeup wake lock: mmc_delayed_work
  55. <4>[ 8276.830553] mmc1: queuing unknown CIS tuple 0x01 (3 bytes)
  56. <4>[ 8276.831504] mmc1: queuing unknown CIS tuple 0x1a (5 bytes)
  57. <4>[ 8276.831927] mmc1: queuing unknown CIS tuple 0x1b (8 bytes)
  58. <4>[ 8276.832030] mmc1: queuing unknown CIS tuple 0x14 (0 bytes)
  59. <4>[ 8276.832585] max8903b_resume: resume
  60. <3>[ 8276.877007] pm_op(): platform_pm_resume+0x0/0x4c returns -22
  61. <3>[ 8276.877032] PM: Device kgsl-2d1.1 failed to resume: error -22
  62. <3>[ 8276.881528] msm_wm8958_setup_power: codec power setup
  63. <3>[ 8276.881581] wm8994_ldo_power: Power up the WM8994 LDOs
  64. <7>[ 8276.931750] lm8502_mod_brightness: set LED1 brightness (0) percent
  65. <7>[ 8276.932594] lm8502_mod_brightness: set LED2 brightness (0) percent
  66. <6>[ 8276.938867] PM: resume of devices complete after 174.595 msecs
  67. <7>[ 8277.072740] lm8502_mod_brightness: set LED1 brightness (0) percent
  68. <7>[ 8277.073123] lm8502_mod_brightness: set LED2 brightness (0) percent
  69. <4>[ 8277.150786] Restarting tasks ... done.
  70. <6>[ 8277.169781] suspend: exit suspend, ret = 0 (2015-04-22 17:17:21.732096444 UTC)
  71. <3>[ 8277.212808] wm8994-codec wm8994-codec: - MEOW wm8994_resume
  72. <6>[ 8277.265979] PM: Syncing filesystems ... skipped for target platform ... done.
  73. <4>[ 8277.272315] Freezing user space processes ... (elapsed 0.02 seconds) done.
  74. <4>[ 8277.296618] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  75. <4>[ 8277.314059] Suspending console(s) (use no_console_suspend to debug)
  76. <3>[ 8277.333376] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
  77. <3>[ 8277.333389] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
  78. <3>[ 8277.333400] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
  79. <3>[ 8277.342704] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
  80. <3>[ 8277.342714] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
  81. <3>[ 8277.342725] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
  82. <7>[ 8277.343142] lm8502_mod_brightness: set LED2 brightness (0) percent
  83. <7>[ 8277.343471] lm8502_mod_brightness: set LED1 brightness (0) percent
  84. <7>[ 8277.348724] lm8502_mod_brightness: set LED1 brightness (0) percent
  85. <7>[ 8277.349546] lm8502_mod_brightness: set LED2 brightness (0) percent
  86. <3>[ 8277.353716] msm_wm8958_shutdown_power: codec power shutdown
  87. <3>[ 8277.353732] wm8994_ldo_power: Power down the WM8994 LDOs
  88. <3>[ 8277.353754] wm8994 4-001a: - MEOW wm8994_device_suspend
  89. <4>[ 8277.358823] max8903b_suspend: suspend
  90. <6>[ 8277.360676] PM: suspend of devices complete after 31.609 msecs
  91. <6>[ 8277.361616] PM: late suspend of devices complete after 0.922 msecs
  92. <4>[ 8277.361629] Disabling non-boot CPUs ...
  93. <4>[ 8277.435146] gic_show_resume_irq: 48 triggered
  94. <4>[ 8277.435146] gic_show_resume_irq: 52 triggered
  95. <4>[ 8277.435146] msm_gpio_show_resume_irq: irq 293/gpio 37 triggered wake
  96. <4>[ 8277.435223] Enabling non-boot CPUs ...
  97. <4>[ 8277.532660] CPU1 is up
  98. <6>[ 8277.533026] PM: early resume of devices complete after 0.348 msecs
  99. <3>[ 8277.552228] lsm303dlh_mag_sysfs 0-001e: read transfer error
  100. <3>[ 8277.552241] lsm303dlh_mag_sysfs 0-001e: get_magnetometer_data failed
  101. <6>[ 8277.599190] wakeup wake lock: mmc_delayed_work
  102. <4>[ 8277.599577] mmc1: queuing unknown CIS tuple 0x01 (3 bytes)
  103. <4>[ 8277.600102] mmc1: queuing unknown CIS tuple 0x1a (5 bytes)
  104. <4>[ 8277.600336] mmc1: queuing unknown CIS tuple 0x1b (8 bytes)
  105. <4>[ 8277.600393] mmc1: queuing unknown CIS tuple 0x14 (0 bytes)
  106. <4>[ 8277.600653] max8903b_resume: resume
  107. <3>[ 8277.635308] pm_op(): platform_pm_resume+0x0/0x4c returns -22
  108. <3>[ 8277.635322] PM: Device kgsl-2d1.1 failed to resume: error -22
  109. <3>[ 8277.639065] msm_wm8958_setup_power: codec power setup
  110. <3>[ 8277.639098] wm8994_ldo_power: Power up the WM8994 LDOs
  111. <7>[ 8277.688062] lm8502_mod_brightness: set LED1 brightness (0) percent
  112. <7>[ 8277.688746] lm8502_mod_brightness: set LED2 brightness (0) percent
  113. <6>[ 8277.692301] PM: resume of devices complete after 159.055 msecs
  114. <4>[ 8277.899493] Restarting tasks ...
  115. <7>[ 8277.906406] lm8502_mod_brightness: set LED1 brightness (0) percent
  116. <7>[ 8277.913471] lm8502_mod_brightness: set LED2 brightness (0) percent
  117. <4>[ 8277.914509] done.
  118. <6>[ 8277.920738] suspend: exit suspend, ret = 0 (2015-04-22 17:17:37.729207999 UTC)
  119. <3>[ 8278.052919] wm8994-codec wm8994-codec: - MEOW wm8994_resume
  120. <6>[ 8278.198508] PM: Syncing filesystems ... skipped for target platform ... done.
  121. <4>[ 8278.205150] Freezing user space processes ... (elapsed 0.02 seconds) done.
  122. <4>[ 8278.236496] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  123. <4>[ 8278.256427] Suspending console(s) (use no_console_suspend to debug)
  124. <3>[ 8278.270697] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
  125. <3>[ 8278.270709] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
  126. <3>[ 8278.270718] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
  127. <3>[ 8278.278818] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
  128. <3>[ 8278.278828] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
  129. <3>[ 8278.278837] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
  130. <7>[ 8278.279237] lm8502_mod_brightness: set LED2 brightness (0) percent
  131. <7>[ 8278.279562] lm8502_mod_brightness: set LED1 brightness (0) percent
  132. <7>[ 8278.284193] lm8502_mod_brightness: set LED1 brightness (0) percent
  133. <7>[ 8278.285002] lm8502_mod_brightness: set LED2 brightness (0) percent
  134. <3>[ 8278.289132] msm_wm8958_shutdown_power: codec power shutdown
  135. <3>[ 8278.289147] wm8994_ldo_power: Power down the WM8994 LDOs
  136. <3>[ 8278.289168] wm8994 4-001a: - MEOW wm8994_device_suspend
  137. <4>[ 8278.295433] max8903b_suspend: suspend
  138. <6>[ 8278.297205] PM: suspend of devices complete after 30.583 msecs
  139. <6>[ 8278.298058] PM: late suspend of devices complete after 0.836 msecs
  140. <4>[ 8278.298069] Disabling non-boot CPUs ...
  141. <6>[ 8278.304708] cpufreq: cpu 1 is not active.
  142. <4>[ 8278.414627] gic_show_resume_irq: 48 triggered
  143. <4>[ 8278.414627] gic_show_resume_irq: 52 triggered
  144. <4>[ 8278.414627] msm_gpio_show_resume_irq: irq 293/gpio 37 triggered wake
  145. <4>[ 8278.414692] Enabling non-boot CPUs ...
  146. <3>[ 8278.462211] lsm303dlh_mag_sysfs 0-001e: read transfer error
  147. <3>[ 8278.462223] lsm303dlh_mag_sysfs 0-001e: get_magnetometer_data failed
  148. <4>[ 8278.512536] CPU1 is up
  149. <6>[ 8278.512889] PM: early resume of devices complete after 0.337 msecs
  150. <6>[ 8278.579159] wakeup wake lock: mmc_delayed_work
  151. <4>[ 8278.579516] mmc1: queuing unknown CIS tuple 0x01 (3 bytes)
  152. <4>[ 8278.579989] mmc1: queuing unknown CIS tuple 0x1a (5 bytes)
  153. <4>[ 8278.580200] mmc1: queuing unknown CIS tuple 0x1b (8 bytes)
  154. <4>[ 8278.580251] mmc1: queuing unknown CIS tuple 0x14 (0 bytes)
  155. <4>[ 8278.580490] max8903b_resume: resume
  156. <3>[ 8278.614266] pm_op(): platform_pm_resume+0x0/0x4c returns -22
  157. <3>[ 8278.614279] PM: Device kgsl-2d1.1 failed to resume: error -22
  158. <3>[ 8278.617837] msm_wm8958_setup_power: codec power setup
  159. <3>[ 8278.617867] wm8994_ldo_power: Power up the WM8994 LDOs
  160. <7>[ 8278.666227] lm8502_mod_brightness: set LED1 brightness (0) percent
  161. <7>[ 8278.666892] lm8502_mod_brightness: set LED2 brightness (0) percent
  162. <6>[ 8278.669943] PM: resume of devices complete after 156.852 msecs
  163. <4>[ 8278.880729] Restarting tasks ...
  164. <7>[ 8278.887413] lm8502_mod_brightness: set LED1 brightness (0) percent
  165. <4>[ 8278.892211] done.
  166. <6>[ 8278.894437] suspend: exit suspend, ret = 0 (2015-04-22 17:17:52.725142372 UTC)
  167. <7>[ 8278.896226] lm8502_mod_brightness: set LED2 brightness (0) percent
  168. <3>[ 8279.032881] wm8994-codec wm8994-codec: - MEOW wm8994_resume
  169. <6>[ 8279.167902] PM: Syncing filesystems ... skipped for target platform ... done.
  170. <4>[ 8279.174185] Freezing user space processes ... (elapsed 0.02 seconds) done.
  171. <4>[ 8279.196770] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  172. <4>[ 8279.216630] Suspending console(s) (use no_console_suspend to debug)
  173. <3>[ 8279.237578] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
  174. <3>[ 8279.237599] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
  175. <3>[ 8279.237616] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
  176. <3>[ 8279.252526] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
  177. <3>[ 8279.252543] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
  178. <3>[ 8279.252559] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
  179. <7>[ 8279.253050] lm8502_mod_brightness: set LED2 brightness (0) percent
  180. <7>[ 8279.253403] lm8502_mod_brightness: set LED1 brightness (0) percent
  181. <7>[ 8279.261650] lm8502_mod_brightness: set LED1 brightness (0) percent
  182. <7>[ 8279.262610] lm8502_mod_brightness: set LED2 brightness (0) percent
  183. <3>[ 8279.266888] msm_wm8958_shutdown_power: codec power shutdown
  184. <3>[ 8279.266913] wm8994_ldo_power: Power down the WM8994 LDOs
  185. <3>[ 8279.266948] wm8994 4-001a: - MEOW wm8994_device_suspend
  186. <4>[ 8279.277563] max8903b_suspend: suspend
  187. <6>[ 8279.279832] PM: suspend of devices complete after 47.208 msecs
  188. <6>[ 8279.281284] PM: late suspend of devices complete after 1.424 msecs
  189. <4>[ 8279.281305] Disabling non-boot CPUs ...
  190. <4>[ 8279.346241] gic_show_resume_irq: 48 triggered
  191. <4>[ 8279.346241] gic_show_resume_irq: 52 triggered
  192. <4>[ 8279.346241] msm_gpio_show_resume_irq: irq 293/gpio 37 triggered wake
  193. <4>[ 8279.346363] Enabling non-boot CPUs ...
  194. <4>[ 8279.442896] CPU1 is up
  195. <6>[ 8279.443484] PM: early resume of devices complete after 0.560 msecs
  196. <6>[ 8279.509280] wakeup wake lock: mmc_delayed_work
  197. <4>[ 8279.509839] mmc1: queuing unknown CIS tuple 0x01 (3 bytes)
  198. <4>[ 8279.510629] mmc1: queuing unknown CIS tuple 0x1a (5 bytes)
  199. <4>[ 8279.510980] mmc1: queuing unknown CIS tuple 0x1b (8 bytes)
  200. <4>[ 8279.511065] mmc1: queuing unknown CIS tuple 0x14 (0 bytes)
  201. <4>[ 8279.511439] max8903b_resume: resume
  202. <3>[ 8279.556631] pm_op(): platform_pm_resume+0x0/0x4c returns -22
  203. <3>[ 8279.556652] PM: Device kgsl-2d1.1 failed to resume: error -22
  204. <3>[ 8279.560888] msm_wm8958_setup_power: codec power setup
  205. <3>[ 8279.560935] wm8994_ldo_power: Power up the WM8994 LDOs
  206. <7>[ 8279.610672] lm8502_mod_brightness: set LED1 brightness (0) percent
  207. <7>[ 8279.611395] lm8502_mod_brightness: set LED2 brightness (0) percent
  208. <6>[ 8279.616785] PM: resume of devices complete after 172.971 msecs
  209. <4>[ 8279.815868] Restarting tasks ...
  210. <7>[ 8279.824733] lm8502_mod_brightness: set LED1 brightness (0) percent
  211. <7>[ 8279.831998] lm8502_mod_brightness: set LED2 brightness (0) percent
  212. <4>[ 8279.835976] done.
  213. <3>[ 8279.972873] wm8994-codec wm8994-codec: - MEOW wm8994_resume
  214. <6>[ 8280.077179] suspend: exit suspend, ret = 0 (2015-04-22 17:18:08.961420445 UTC)
  215. <6>[ 8280.160365] PM: Syncing filesystems ... skipped for target platform ... done.
  216. <4>[ 8280.166887] Freezing user space processes ... (elapsed 0.02 seconds) done.
  217. <4>[ 8280.194394] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  218. <4>[ 8280.214215] Suspending console(s) (use no_console_suspend to debug)
  219. <3>[ 8280.244289] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
  220. <3>[ 8280.244322] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
  221. <3>[ 8280.244351] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
  222. <3>[ 8280.269419] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
  223. <3>[ 8280.269448] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
  224. <3>[ 8280.269474] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
  225. <7>[ 8280.270094] lm8502_mod_brightness: set LED2 brightness (0) percent
  226. <7>[ 8280.270495] lm8502_mod_brightness: set LED1 brightness (0) percent
  227. <7>[ 8280.284390] lm8502_mod_brightness: set LED1 brightness (0) percent
  228. <7>[ 8280.285403] lm8502_mod_brightness: set LED2 brightness (0) percent
  229. <3>[ 8280.290044] msm_wm8958_shutdown_power: codec power shutdown
  230. <3>[ 8280.290085] wm8994_ldo_power: Power down the WM8994 LDOs
  231. <3>[ 8280.290141] wm8994 4-001a: - MEOW wm8994_device_suspend
  232. <4>[ 8280.302434] max8903b_suspend: suspend
  233. <6>[ 8280.305845] PM: suspend of devices complete after 74.031 msecs
  234. <6>[ 8280.308114] PM: late suspend of devices complete after 2.224 msecs
  235. <4>[ 8280.308148] Disabling non-boot CPUs ...
  236. <4>[ 8280.379550] gic_show_resume_irq: 48 triggered
  237. <4>[ 8280.379550] gic_show_resume_irq: 52 triggered
  238. <4>[ 8280.379550] msm_gpio_show_resume_irq: irq 293/gpio 37 triggered wake
  239. <4>[ 8280.379735] Enabling non-boot CPUs ...
  240. <3>[ 8280.412314] lsm303dlh_mag_sysfs 0-001e: read transfer error
  241. <3>[ 8280.412350] lsm303dlh_mag_sysfs 0-001e: get_magnetometer_data failed
  242. <4>[ 8280.473244] CPU1 is up
  243. <6>[ 8280.474104] PM: early resume of devices complete after 0.816 msecs
  244. <6>[ 8280.540342] wakeup wake lock: mmc_delayed_work
  245. <4>[ 8280.541174] mmc1: queuing unknown CIS tuple 0x01 (3 bytes)
  246. <4>[ 8280.542507] mmc1: queuing unknown CIS tuple 0x1a (5 bytes)
  247. <4>[ 8280.543056] mmc1: queuing unknown CIS tuple 0x1b (8 bytes)
  248. <4>[ 8280.543190] mmc1: queuing unknown CIS tuple 0x14 (0 bytes)
  249. <4>[ 8280.543755] max8903b_resume: resume
  250. <3>[ 8280.587154] pm_op(): platform_pm_resume+0x0/0x4c returns -22
  251. <3>[ 8280.587188] PM: Device kgsl-2d1.1 failed to resume: error -22
  252. <3>[ 8280.592030] msm_wm8958_setup_power: codec power setup
  253. <3>[ 8280.592100] wm8994_ldo_power: Power up the WM8994 LDOs
  254. <7>[ 8280.643992] lm8502_mod_brightness: set LED1 brightness (0) percent
  255. <7>[ 8280.644822] lm8502_mod_brightness: set LED2 brightness (0) percent
  256. <6>[ 8280.653377] PM: resume of devices complete after 178.698 msecs
  257. <4>[ 8280.867718] Restarting tasks ...
  258. <7>[ 8280.881850] lm8502_mod_brightness: set LED1 brightness (0) percent
  259. <7>[ 8280.891175] lm8502_mod_brightness: set LED2 brightness (0) percent
  260. <4>[ 8280.891686] done.
  261. <3>[ 8281.042872] wm8994-codec wm8994-codec: - MEOW wm8994_resume
  262. <6>[ 8281.143672] suspend: exit suspend, ret = 0 (2015-04-22 17:18:24.991951555 UTC)
  263. <6>[ 8281.180161] PM: Syncing filesystems ... skipped for target platform ... done.
  264. <4>[ 8281.186572] Freezing user space processes ... (elapsed 0.03 seconds) done.
  265. <4>[ 8281.226717] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  266. <4>[ 8281.244157] Suspending console(s) (use no_console_suspend to debug)
  267. <3>[ 8281.273319] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
  268. <3>[ 8281.273350] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
  269. <3>[ 8281.273377] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
  270. <3>[ 8281.298627] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
  271. <3>[ 8281.298655] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
  272. <3>[ 8281.298681] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
  273. <7>[ 8281.299300] lm8502_mod_brightness: set LED2 brightness (0) percent
  274. <7>[ 8281.299701] lm8502_mod_brightness: set LED1 brightness (0) percent
  275. <7>[ 8281.313023] lm8502_mod_brightness: set LED1 brightness (0) percent
  276. <7>[ 8281.314067] lm8502_mod_brightness: set LED2 brightness (0) percent
  277. <3>[ 8281.318523] msm_wm8958_shutdown_power: codec power shutdown
  278. <3>[ 8281.318561] wm8994_ldo_power: Power down the WM8994 LDOs
  279. <3>[ 8281.318607] wm8994 4-001a: - MEOW wm8994_device_suspend
  280. <4>[ 8281.328768] max8903b_suspend: suspend
  281. <6>[ 8281.332126] PM: suspend of devices complete after 71.125 msecs
  282. <6>[ 8281.334125] PM: late suspend of devices complete after 1.950 msecs
  283. <4>[ 8281.334155] Disabling non-boot CPUs ...
  284. <4>[ 8281.398749] gic_show_resume_irq: 48 triggered
  285. <4>[ 8281.398749] gic_show_resume_irq: 52 triggered
  286. <4>[ 8281.398749] msm_gpio_show_resume_irq: irq 293/gpio 37 triggered wake
  287. <4>[ 8281.398896] Enabling non-boot CPUs ...
  288. <4>[ 8281.493162] CPU1 is up
  289. <6>[ 8281.493760] PM: early resume of devices complete after 0.560 msecs
  290. <3>[ 8281.522296] lsm303dlh_mag_sysfs 0-001e: read transfer error
  291. <3>[ 8281.522325] lsm303dlh_mag_sysfs 0-001e: get_magnetometer_data failed
  292. <6>[ 8281.560232] wakeup wake lock: mmc_delayed_work
  293. <4>[ 8281.560997] mmc1: queuing unknown CIS tuple 0x01 (3 bytes)
  294. <4>[ 8281.562134] mmc1: queuing unknown CIS tuple 0x1a (5 bytes)
  295. <4>[ 8281.562745] mmc1: queuing unknown CIS tuple 0x1b (8 bytes)
  296. <4>[ 8281.562874] mmc1: queuing unknown CIS tuple 0x14 (0 bytes)
  297. <4>[ 8281.563399] max8903b_resume: resume
  298. <3>[ 8281.605885] pm_op(): platform_pm_resume+0x0/0x4c returns -22
  299. <3>[ 8281.605919] PM: Device kgsl-2d1.1 failed to resume: error -22
  300. <3>[ 8281.610762] msm_wm8958_setup_power: codec power setup
  301. <3>[ 8281.610832] wm8994_ldo_power: Power up the WM8994 LDOs
  302. <7>[ 8281.662671] lm8502_mod_brightness: set LED1 brightness (0) percent
  303. <7>[ 8281.663479] lm8502_mod_brightness: set LED2 brightness (0) percent
  304. <6>[ 8281.671928] PM: resume of devices complete after 177.772 msecs
  305. <7>[ 8281.768234] lm8502_mod_brightness: set LED1 brightness (0) percent
  306. <7>[ 8281.768654] lm8502_mod_brightness: set LED2 brightness (0) percent
  307. <4>[ 8281.898599] Restarting tasks ... done.
  308. <3>[ 8281.912889] wm8994-codec wm8994-codec: - MEOW wm8994_resume
  309. <6>[ 8281.985992] suspend: exit suspend, ret = 0 (2015-04-22 17:18:40.815617037 UTC)
  310. <6>[ 8282.017116] PM: Syncing filesystems ... skipped for target platform ... done.
  311. <4>[ 8282.023549] Freezing user space processes ... (elapsed 0.02 seconds) done.
  312. <4>[ 8282.054080] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
  313. <4>[ 8282.064017] Suspending console(s) (use no_console_suspend to debug)
  314. <3>[ 8282.081675] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
  315. <3>[ 8282.081695] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
  316. <3>[ 8282.081711] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
  317. <3>[ 8282.096617] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
  318. <3>[ 8282.096634] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
  319. <3>[ 8282.096650] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
  320. <7>[ 8282.097130] lm8502_mod_brightness: set LED2 brightness (0) percent
  321. <7>[ 8282.097482] lm8502_mod_brightness: set LED1 brightness (0) percent
  322. <7>[ 8282.107128] lm8502_mod_brightness: set LED1 brightness (0) percent
  323. <7>[ 8282.108007] lm8502_mod_brightness: set LED2 brightness (0) percent
  324. <3>[ 8282.112311] msm_wm8958_shutdown_power: codec power shutdown
  325. <3>[ 8282.112334] wm8994_ldo_power: Power down the WM8994 LDOs
  326. <3>[ 8282.112365] wm8994 4-001a: - MEOW wm8994_device_suspend
  327. <4>[ 8282.121033] max8903b_suspend: suspend
  328. <6>[ 8282.123328] PM: suspend of devices complete after 46.438 msecs
  329. <6>[ 8282.124598] PM: late suspend of devices complete after 1.245 msecs
  330. <4>[ 8282.124617] Disabling non-boot CPUs ...
  331. <4>[ 8282.196191] gic_show_resume_irq: 48 triggered
  332. <4>[ 8282.196191] gic_show_resume_irq: 52 triggered
  333. <4>[ 8282.196191] msm_gpio_show_resume_irq: irq 293/gpio 37 triggered wake
  334. <4>[ 8282.196293] Enabling non-boot CPUs ...
  335. <3>[ 8282.242254] lsm303dlh_mag_sysfs 0-001e: read transfer error
  336. <3>[ 8282.242274] lsm303dlh_mag_sysfs 0-001e: get_magnetometer_data failed
  337. <4>[ 8282.292791] CPU1 is up
  338. <6>[ 8282.293241] PM: early resume of devices complete after 0.425 msecs
  339. <6>[ 8282.359417] wakeup wake lock: mmc_delayed_work
  340. <4>[ 8282.359946] mmc1: queuing unknown CIS tuple 0x01 (3 bytes)
  341. <4>[ 8282.360692] mmc1: queuing unknown CIS tuple 0x1a (5 bytes)
  342. <4>[ 8282.361025] mmc1: queuing unknown CIS tuple 0x1b (8 bytes)
  343. <4>[ 8282.361105] mmc1: queuing unknown CIS tuple 0x14 (0 bytes)
  344. <4>[ 8282.361461] max8903b_resume: resume
  345. <3>[ 8282.405549] pm_op(): platform_pm_resume+0x0/0x4c returns -22
  346. <3>[ 8282.405570] PM: Device kgsl-2d1.1 failed to resume: error -22
  347. <3>[ 8282.409823] msm_wm8958_setup_power: codec power setup
  348. <3>[ 8282.409870] wm8994_ldo_power: Power up the WM8994 LDOs
  349. <7>[ 8282.459630] lm8502_mod_brightness: set LED1 brightness (0) percent
  350. <7>[ 8282.460353] lm8502_mod_brightness: set LED2 brightness (0) percent
  351. <6>[ 8282.465727] PM: resume of devices complete after 172.206 msecs
  352. <7>[ 8282.595797] lm8502_mod_brightness: set LED1 brightness (0) percent
  353. <7>[ 8282.596170] lm8502_mod_brightness: set LED2 brightness (0) percent
  354. <4>[ 8282.688276] Restarting tasks ... done.
  355. <6>[ 8282.708008] suspend: exit suspend, ret = 0 (2015-04-22 17:18:56.743275852 UTC)
  356. <3>[ 8282.735482] wm8994-codec wm8994-codec: - MEOW wm8994_resume
  357. <6>[ 8282.798727] PM: Syncing filesystems ... skipped for target platform ... done.
  358. <4>[ 8282.806996] Freezing user space processes ... (elapsed 0.01 seconds) done.
  359. <4>[ 8282.826510] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  360. <4>[ 8282.846438] Suspending console(s) (use no_console_suspend to debug)
  361. <3>[ 8282.860844] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
  362. <3>[ 8282.860857] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
  363. <3>[ 8282.860868] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
  364. <3>[ 8282.870221] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
  365. <3>[ 8282.870232] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
  366. <3>[ 8282.870242] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
  367. <7>[ 8282.870648] lm8502_mod_brightness: set LED2 brightness (0) percent
  368. <7>[ 8282.870976] lm8502_mod_brightness: set LED1 brightness (0) percent
  369. <7>[ 8282.876098] lm8502_mod_brightness: set LED1 brightness (0) percent
  370. <7>[ 8282.876916] lm8502_mod_brightness: set LED2 brightness (0) percent
  371. <3>[ 8282.881071] msm_wm8958_shutdown_power: codec power shutdown
  372. <3>[ 8282.881087] wm8994_ldo_power: Power down the WM8994 LDOs
  373. <3>[ 8282.881109] wm8994 4-001a: - MEOW wm8994_device_suspend
  374. <4>[ 8282.885426] max8903b_suspend: suspend
  375. <6>[ 8282.887272] PM: suspend of devices complete after 30.599 msecs
  376. <6>[ 8282.888181] PM: late suspend of devices complete after 0.891 msecs
  377. <4>[ 8282.888194] Disabling non-boot CPUs ...
  378. <6>[ 8282.894749] cpufreq: cpu 1 is not active.
  379. <4>[ 8283.007253] gic_show_resume_irq: 48 triggered
  380. <4>[ 8283.007253] gic_show_resume_irq: 52 triggered
  381. <4>[ 8283.007253] msm_gpio_show_resume_irq: irq 293/gpio 37 triggered wake
  382. <4>[ 8283.007337] Enabling non-boot CPUs ...
  383. <4>[ 8283.102605] CPU1 is up
  384. <6>[ 8283.102965] PM: early resume of devices complete after 0.342 msecs
  385. <3>[ 8283.152231] lsm303dlh_mag_sysfs 0-001e: read transfer error
  386. <3>[ 8283.152244] lsm303dlh_mag_sysfs 0-001e: get_magnetometer_data failed
  387. <6>[ 8283.169205] wakeup wake lock: mmc_delayed_work
  388. <4>[ 8283.169582] mmc1: queuing unknown CIS tuple 0x01 (3 bytes)
  389. <4>[ 8283.170094] mmc1: queuing unknown CIS tuple 0x1a (5 bytes)
  390. <4>[ 8283.170322] mmc1: queuing unknown CIS tuple 0x1b (8 bytes)
  391. <4>[ 8283.170378] mmc1: queuing unknown CIS tuple 0x14 (0 bytes)
  392. <4>[ 8283.170632] max8903b_resume: resume
  393. <3>[ 8283.204078] pm_op(): platform_pm_resume+0x0/0x4c returns -22
  394. <3>[ 8283.204092] PM: Device kgsl-2d1.1 failed to resume: error -22
  395. <3>[ 8283.207730] msm_wm8958_setup_power: codec power setup
  396. <3>[ 8283.207763] wm8994_ldo_power: Power up the WM8994 LDOs
  397. <7>[ 8283.256474] lm8502_mod_brightness: set LED1 brightness (0) percent
  398. <7>[ 8283.257146] lm8502_mod_brightness: set LED2 brightness (0) percent
  399. <6>[ 8283.260524] PM: resume of devices complete after 157.319 msecs
  400. <4>[ 8283.472430] Restarting tasks ...
  401. <7>[ 8283.472910] lm8502_mod_brightness: set LED1 brightness (0) percent
  402. <7>[ 8283.491244] lm8502_mod_brightness: set LED2 brightness (0) percent
  403. <4>[ 8283.493644] done.
  404. <3>[ 8283.632911] wm8994-codec wm8994-codec: - MEOW wm8994_resume
  405. <6>[ 8283.732905] suspend: exit suspend, ret = 0 (2015-04-22 17:19:11.973085630 UTC)
  406. <6>[ 8283.771385] PM: Syncing filesystems ... skipped for target platform ... done.
  407. <4>[ 8283.777844] Freezing user space processes ... (elapsed 0.03 seconds) done.
  408. <4>[ 8283.814263] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  409. <4>[ 8283.834166] Suspending console(s) (use no_console_suspend to debug)
  410. <3>[ 8283.863169] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
  411. <3>[ 8283.863200] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
  412. <3>[ 8283.863226] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
  413. <3>[ 8283.888238] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
  414. <3>[ 8283.888266] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
  415. <3>[ 8283.888292] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
  416. <7>[ 8283.888885] lm8502_mod_brightness: set LED2 brightness (0) percent
  417. <7>[ 8283.889277] lm8502_mod_brightness: set LED1 brightness (0) percent
  418. <7>[ 8283.902494] lm8502_mod_brightness: set LED1 brightness (0) percent
  419. <7>[ 8283.903480] lm8502_mod_brightness: set LED2 brightness (0) percent
  420. <3>[ 8283.908050] msm_wm8958_shutdown_power: codec power shutdown
  421. <3>[ 8283.908087] wm8994_ldo_power: Power down the WM8994 LDOs
  422. <3>[ 8283.908136] wm8994 4-001a: - MEOW wm8994_device_suspend
  423. <4>[ 8283.918275] max8903b_suspend: suspend
  424. <6>[ 8283.921635] PM: suspend of devices complete after 70.790 msecs
  425. <6>[ 8283.923634] PM: late suspend of devices complete after 1.950 msecs
  426. <4>[ 8283.923663] Disabling non-boot CPUs ...
  427. <4>[ 8283.987954] gic_show_resume_irq: 48 triggered
  428. <4>[ 8283.987954] gic_show_resume_irq: 52 triggered
  429. <4>[ 8283.987954] msm_gpio_show_resume_irq: irq 293/gpio 37 triggered wake
  430. <4>[ 8283.988102] Enabling non-boot CPUs ...
  431. <3>[ 8284.062301] lsm303dlh_mag_sysfs 0-001e: read transfer error
  432. <3>[ 8284.062332] lsm303dlh_mag_sysfs 0-001e: get_magnetometer_data failed
  433. <4>[ 8284.083169] CPU1 is up
  434. <6>[ 8284.083763] PM: early resume of devices complete after 0.558 msecs
  435. <6>[ 8284.150254] wakeup wake lock: mmc_delayed_work
  436. <4>[ 8284.151017] mmc1: queuing unknown CIS tuple 0x01 (3 bytes)
  437. <4>[ 8284.152151] mmc1: queuing unknown CIS tuple 0x1a (5 bytes)
  438. <4>[ 8284.152764] mmc1: queuing unknown CIS tuple 0x1b (8 bytes)
  439. <4>[ 8284.152894] mmc1: queuing unknown CIS tuple 0x14 (0 bytes)
  440. <4>[ 8284.153418] max8903b_resume: resume
  441. <3>[ 8284.195896] pm_op(): platform_pm_resume+0x0/0x4c returns -22
  442. <3>[ 8284.195929] PM: Device kgsl-2d1.1 failed to resume: error -22
  443. <3>[ 8284.200771] msm_wm8958_setup_power: codec power setup
  444. <3>[ 8284.200846] wm8994_ldo_power: Power up the WM8994 LDOs
  445. <7>[ 8284.252690] lm8502_mod_brightness: set LED1 brightness (0) percent
  446. <7>[ 8284.253498] lm8502_mod_brightness: set LED2 brightness (0) percent
  447. <6>[ 8284.261950] PM: resume of devices complete after 177.796 msecs
  448. <4>[ 8284.476633] Restarting tasks ...
  449. <7>[ 8284.489926] lm8502_mod_brightness: set LED1 brightness (0) percent
  450. <7>[ 8284.498142] lm8502_mod_brightness: set LED2 brightness (0) percent
  451. <4>[ 8284.503009] done.
  452. <3>[ 8284.642940] wm8994-codec wm8994-codec: - MEOW wm8994_resume
  453. <6>[ 8284.742665] suspend: exit suspend, ret = 0 (2015-04-22 17:19:27.982258815 UTC)
  454. <6>[ 8284.778260] PM: Syncing filesystems ... skipped for target platform ... done.
  455. <4>[ 8284.784545] Freezing user space processes ... (elapsed 0.03 seconds) done.
  456. <4>[ 8284.816751] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  457. <4>[ 8284.836649] Suspending console(s) (use no_console_suspend to debug)
  458. <3>[ 8284.857594] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
  459. <3>[ 8284.857616] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
  460. <3>[ 8284.857633] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
  461. <3>[ 8284.872554] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
  462. <3>[ 8284.872572] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
  463. <3>[ 8284.872588] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
  464. <7>[ 8284.873086] lm8502_mod_brightness: set LED2 brightness (0) percent
  465. <7>[ 8284.873439] lm8502_mod_brightness: set LED1 brightness (0) percent
  466. <7>[ 8284.881736] lm8502_mod_brightness: set LED1 brightness (0) percent
  467. <7>[ 8284.882627] lm8502_mod_brightness: set LED2 brightness (0) percent
  468. <3>[ 8284.886904] msm_wm8958_shutdown_power: codec power shutdown
  469. <3>[ 8284.886929] wm8994_ldo_power: Power down the WM8994 LDOs
  470. <3>[ 8284.886966] wm8994 4-001a: - MEOW wm8994_device_suspend
  471. <4>[ 8284.897577] max8903b_suspend: suspend
  472. <6>[ 8284.899855] PM: suspend of devices complete after 47.243 msecs
  473. <6>[ 8284.901324] PM: late suspend of devices complete after 1.441 msecs
  474. <4>[ 8284.901345] Disabling non-boot CPUs ...
  475. <4>[ 8285.016441] gic_show_resume_irq: 48 triggered
  476. <4>[ 8285.016441] gic_show_resume_irq: 52 triggered
  477. <4>[ 8285.016441] msm_gpio_show_resume_irq: irq 293/gpio 37 triggered wake
  478. <4>[ 8285.016563] Enabling non-boot CPUs ...
  479. <4>[ 8285.112911] CPU1 is up
  480. <6>[ 8285.113502] PM: early resume of devices complete after 0.562 msecs
  481. <3>[ 8285.174802] lsm303dlh_mag_sysfs 0-001e: read transfer error
  482. <3>[ 8285.174834] lsm303dlh_mag_sysfs 0-001e: get_magnetometer_data failed
  483. <6>[ 8285.179462] wakeup wake lock: mmc_delayed_work
  484. <4>[ 8285.180020] mmc1: queuing unknown CIS tuple 0x01 (3 bytes)
  485. <4>[ 8285.180811] mmc1: queuing unknown CIS tuple 0x1a (5 bytes)
  486. <4>[ 8285.181163] mmc1: queuing unknown CIS tuple 0x1b (8 bytes)
  487. <4>[ 8285.181248] mmc1: queuing unknown CIS tuple 0x14 (0 bytes)
  488. <4>[ 8285.181622] max8903b_resume: resume
  489. <3>[ 8285.226662] pm_op(): platform_pm_resume+0x0/0x4c returns -22
  490. <3>[ 8285.226683] PM: Device kgsl-2d1.1 failed to resume: error -22
  491. <3>[ 8285.230931] msm_wm8958_setup_power: codec power setup
  492. <3>[ 8285.230977] wm8994_ldo_power: Power up the WM8994 LDOs
  493. <7>[ 8285.280706] lm8502_mod_brightness: set LED1 brightness (0) percent
  494. <7>[ 8285.281429] lm8502_mod_brightness: set LED2 brightness (0) percent
  495. <6>[ 8285.286795] PM: resume of devices complete after 172.961 msecs
  496. <4>[ 8285.497003] Restarting tasks ...
  497. <7>[ 8285.506312] lm8502_mod_brightness: set LED1 brightness (0) percent
  498. <7>[ 8285.513681] lm8502_mod_brightness: set LED2 brightness (0) percent
  499. <4>[ 8285.516670] done.
  500. <3>[ 8285.652920] wm8994-codec wm8994-codec: - MEOW wm8994_resume
  501. <6>[ 8285.753476] suspend: exit suspend, ret = 0 (2015-04-22 17:19:43.967679556 UTC)
  502. <6>[ 8285.790195] PM: Syncing filesystems ... skipped for target platform ... done.
  503. <4>[ 8285.796614] Freezing user space processes ... (elapsed 0.02 seconds) done.
  504. <4>[ 8285.824240] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  505. <4>[ 8285.844130] Suspending console(s) (use no_console_suspend to debug)
  506. <3>[ 8285.873273] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
  507. <3>[ 8285.873303] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
  508. <3>[ 8285.873330] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
  509. <3>[ 8285.898345] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
  510. <3>[ 8285.898373] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
  511. <3>[ 8285.898398] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
  512. <7>[ 8285.898991] lm8502_mod_brightness: set LED2 brightness (0) percent
  513. <7>[ 8285.899382] lm8502_mod_brightness: set LED1 brightness (0) percent
  514. <7>[ 8285.912498] lm8502_mod_brightness: set LED1 brightness (0) percent
  515. <7>[ 8285.913485] lm8502_mod_brightness: set LED2 brightness (0) percent
  516. <3>[ 8285.918051] msm_wm8958_shutdown_power: codec power shutdown
  517. <3>[ 8285.918088] wm8994_ldo_power: Power down the WM8994 LDOs
  518. <3>[ 8285.918135] wm8994 4-001a: - MEOW wm8994_device_suspend
  519. <4>[ 8285.928291] max8903b_suspend: suspend
  520. <6>[ 8285.931623] PM: suspend of devices complete after 70.620 msecs
  521. <6>[ 8285.933622] PM: late suspend of devices complete after 1.949 msecs
  522. <4>[ 8285.933652] Disabling non-boot CPUs ...
  523. <4>[ 8285.999242] gic_show_resume_irq: 48 triggered
  524. <4>[ 8285.999242] gic_show_resume_irq: 52 triggered
  525. <4>[ 8285.999242] msm_gpio_show_resume_irq: irq 293/gpio 37 triggered wake
  526. <4>[ 8285.999389] Enabling non-boot CPUs ...
  527. <3>[ 8286.082306] lsm303dlh_mag_sysfs 0-001e: read transfer error
  528. <3>[ 8286.082337] lsm303dlh_mag_sysfs 0-001e: get_magnetometer_data failed
  529. <4>[ 8286.093189] CPU1 is up
  530. <6>[ 8286.093786] PM: early resume of devices complete after 0.559 msecs
  531. <6>[ 8286.160270] wakeup wake lock: mmc_delayed_work
  532. <4>[ 8286.161034] mmc1: queuing unknown CIS tuple 0x01 (3 bytes)
  533. <4>[ 8286.162170] mmc1: queuing unknown CIS tuple 0x1a (5 bytes)
  534. <4>[ 8286.162785] mmc1: queuing unknown CIS tuple 0x1b (8 bytes)
  535. <4>[ 8286.162915] mmc1: queuing unknown CIS tuple 0x14 (0 bytes)
  536. <4>[ 8286.163440] max8903b_resume: resume
  537. <3>[ 8286.205918] pm_op(): platform_pm_resume+0x0/0x4c returns -22
  538. <3>[ 8286.205952] PM: Device kgsl-2d1.1 failed to resume: error -22
  539. <3>[ 8286.210982] msm_wm8958_setup_power: codec power setup
  540. <3>[ 8286.211051] wm8994_ldo_power: Power up the WM8994 LDOs
  541. <7>[ 8286.262854] lm8502_mod_brightness: set LED1 brightness (0) percent
  542. <7>[ 8286.263684] lm8502_mod_brightness: set LED2 brightness (0) percent
  543. <6>[ 8286.272113] PM: resume of devices complete after 177.935 msecs
  544. <7>[ 8286.368702] lm8502_mod_brightness: set LED1 brightness (0) percent
  545. <7>[ 8286.369121] lm8502_mod_brightness: set LED2 brightness (0) percent
  546. <4>[ 8286.499084] Restarting tasks ... done.
  547. <3>[ 8286.512957] wm8994-codec wm8994-codec: - MEOW wm8994_resume
  548. <6>[ 8286.578464] suspend: exit suspend, ret = 0 (2015-04-22 17:19:59.807889185 UTC)
  549. <6>[ 8286.584676] PM: Syncing filesystems ... skipped for target platform ... done.
  550. <4>[ 8286.592021] Freezing user space processes ... (elapsed 0.02 seconds) done.
  551. <4>[ 8286.616526] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  552. <4>[ 8286.636462] Suspending console(s) (use no_console_suspend to debug)
  553. <3>[ 8286.656336] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
  554. <3>[ 8286.656365] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
  555. <3>[ 8286.656391] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
  556. <3>[ 8286.681337] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
  557. <3>[ 8286.681363] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
  558. <3>[ 8286.681388] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
  559. <7>[ 8286.681927] lm8502_mod_brightness: set LED2 brightness (0) percent
  560. <7>[ 8286.682387] lm8502_mod_brightness: set LED1 brightness (0) percent
  561. <7>[ 8286.693673] lm8502_mod_brightness: set LED1 brightness (0) percent
  562. <7>[ 8286.694585] lm8502_mod_brightness: set LED2 brightness (0) percent
  563. <3>[ 8286.698939] msm_wm8958_shutdown_power: codec power shutdown
  564. <3>[ 8286.698972] wm8994_ldo_power: Power down the WM8994 LDOs
  565. <3>[ 8286.699014] wm8994 4-001a: - MEOW wm8994_device_suspend
  566. <4>[ 8286.707535] max8903b_suspend: suspend
  567. <6>[ 8286.710017] PM: suspend of devices complete after 63.380 msecs
  568. <6>[ 8286.711526] PM: late suspend of devices complete after 1.473 msecs
  569. <4>[ 8286.711552] Disabling non-boot CPUs ...
  570. <6>[ 8286.714761] cpufreq: cpu 1 is not active.
  571. <6>[ 8286.732270] cpufreq: cpu 1 is not active.
  572. <6>[ 8286.770923] wakeup wake lock: alarm
  573. <4>[ 8286.789944] gic_show_resume_irq: 48 triggered
  574. <4>[ 8286.789944] gic_show_resume_irq: 52 triggered
  575. <4>[ 8286.789944] msm_gpio_show_resume_irq: irq 293/gpio 37 triggered wake
  576. <4>[ 8286.790130] Enabling non-boot CPUs ...
  577. <4>[ 8286.883088] CPU1 is up
  578. <6>[ 8286.883585] PM: early resume of devices complete after 0.463 msecs
  579. <4>[ 8286.950255] mmc1: queuing unknown CIS tuple 0x01 (3 bytes)
  580. <4>[ 8286.951259] mmc1: queuing unknown CIS tuple 0x1a (5 bytes)
  581. <4>[ 8286.951708] mmc1: queuing unknown CIS tuple 0x1b (8 bytes)
  582. <4>[ 8286.951819] mmc1: queuing unknown CIS tuple 0x14 (0 bytes)
  583. <4>[ 8286.952373] max8903b_resume: resume
  584. <3>[ 8286.994666] pm_op(): platform_pm_resume+0x0/0x4c returns -22
  585. <3>[ 8286.994698] PM: Device kgsl-2d1.1 failed to resume: error -22
  586. <3>[ 8286.999338] msm_wm8958_setup_power: codec power setup
  587. <3>[ 8286.999398] wm8994_ldo_power: Power up the WM8994 LDOs
  588. <7>[ 8287.050352] lm8502_mod_brightness: set LED1 brightness (0) percent
  589. <7>[ 8287.051141] lm8502_mod_brightness: set LED2 brightness (0) percent
  590. <6>[ 8287.058130] PM: resume of devices complete after 174.165 msecs
  591. <4>[ 8287.266668] Restarting tasks ...
  592. <7>[ 8287.267286] lm8502_mod_brightness: set LED1 brightness (0) percent
  593. <4>[ 8287.285398] done.
  594. <6>[ 8287.285571] suspend: exit suspend, ret = 0 (2015-04-22 17:20:14.728728148 UTC)
  595. <7>[ 8287.290642] lm8502_mod_brightness: set LED2 brightness (0) percent
  596. <3>[ 8287.432973] wm8994-codec wm8994-codec: - MEOW wm8994_resume
  597. <6>[ 8287.574674] PM: Syncing filesystems ... skipped for target platform ... done.
  598. <4>[ 8287.580781] Freezing user space processes ... (elapsed 0.02 seconds) done.
  599. <4>[ 8287.606530] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  600. <4>[ 8287.626474] Suspending console(s) (use no_console_suspend to debug)
  601. <3>[ 8287.646384] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
  602. <3>[ 8287.646414] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
  603. <3>[ 8287.646440] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
  604. <3>[ 8287.671368] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
  605. <3>[ 8287.671394] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
  606. <3>[ 8287.671419] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
  607. <7>[ 8287.671963] lm8502_mod_brightness: set LED2 brightness (0) percent
  608. <7>[ 8287.672357] lm8502_mod_brightness: set LED1 brightness (0) percent
  609. <7>[ 8287.683489] lm8502_mod_brightness: set LED1 brightness (0) percent
  610. <7>[ 8287.684430] lm8502_mod_brightness: set LED2 brightness (0) percent
  611. <3>[ 8287.688881] msm_wm8958_shutdown_power: codec power shutdown
  612. <3>[ 8287.688914] wm8994_ldo_power: Power down the WM8994 LDOs
  613. <3>[ 8287.688957] wm8994 4-001a: - MEOW wm8994_device_suspend
  614. <4>[ 8287.697486] max8903b_suspend: suspend
  615. <6>[ 8287.700013] PM: suspend of devices complete after 63.367 msecs
  616. <6>[ 8287.701549] PM: late suspend of devices complete after 1.500 msecs
  617. <4>[ 8287.701576] Disabling non-boot CPUs ...
  618. <6>[ 8287.704768] cpufreq: cpu 1 is not active.
  619. <6>[ 8287.722277] cpufreq: cpu 1 is not active.
  620. <4>[ 8287.780426] gic_show_resume_irq: 48 triggered
  621. <4>[ 8287.780426] gic_show_resume_irq: 52 triggered
  622. <4>[ 8287.780426] msm_gpio_show_resume_irq: irq 293/gpio 37 triggered wake
  623. <4>[ 8287.780612] Enabling non-boot CPUs ...
  624. <3>[ 8287.872298] lsm303dlh_mag_sysfs 0-001e: read transfer error
  625. <3>[ 8287.872328] lsm303dlh_mag_sysfs 0-001e: get_magnetometer_data failed
  626. <4>[ 8287.933055] CPU1 is up
  627. <6>[ 8287.933550] PM: early resume of devices complete after 0.463 msecs
  628. <6>[ 8287.999448] wakeup wake lock: mmc_delayed_work
  629. <4>[ 8288.000124] mmc1: queuing unknown CIS tuple 0x01 (3 bytes)
  630. <4>[ 8288.001127] mmc1: queuing unknown CIS tuple 0x1a (5 bytes)
  631. <4>[ 8288.001576] mmc1: queuing unknown CIS tuple 0x1b (8 bytes)
  632. <4>[ 8288.001689] mmc1: queuing unknown CIS tuple 0x14 (0 bytes)
  633. <4>[ 8288.002141] max8903b_resume: resume
  634. <3>[ 8288.044720] pm_op(): platform_pm_resume+0x0/0x4c returns -22
  635. <3>[ 8288.044752] PM: Device kgsl-2d1.1 failed to resume: error -22
  636. <3>[ 8288.049431] msm_wm8958_setup_power: codec power setup
  637. <3>[ 8288.049490] wm8994_ldo_power: Power up the WM8994 LDOs
  638. <7>[ 8288.100497] lm8502_mod_brightness: set LED1 brightness (0) percent
  639. <7>[ 8288.101286] lm8502_mod_brightness: set LED2 brightness (0) percent
  640. <6>[ 8288.108294] PM: resume of devices complete after 174.362 msecs
  641. <7>[ 8288.328715] lm8502_mod_brightness: set LED1 brightness (0) percent
  642. <7>[ 8288.334873] lm8502_mod_brightness: set LED2 brightness (0) percent
  643. <4>[ 8288.341033] Restarting tasks ... done.
  644. <6>[ 8288.353642] suspend: exit suspend, ret = 0 (2015-04-22 17:20:30.746638520 UTC)
  645. <3>[ 8288.492941] wm8994-codec wm8994-codec: - MEOW wm8994_resume
  646. <6>[ 8288.629313] PM: Syncing filesystems ... skipped for target platform ... done.
  647. <4>[ 8288.637925] Freezing user space processes ... (elapsed 0.02 seconds) done.
  648. <4>[ 8288.666552] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  649. <4>[ 8288.686487] Suspending console(s) (use no_console_suspend to debug)
  650. <3>[ 8288.706409] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
  651. <3>[ 8288.706438] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
  652. <3>[ 8288.706464] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
  653. <3>[ 8288.731390] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
  654. <3>[ 8288.731417] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
  655. <3>[ 8288.731441] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
  656. <7>[ 8288.731983] lm8502_mod_brightness: set LED2 brightness (0) percent
  657. <7>[ 8288.732360] lm8502_mod_brightness: set LED1 brightness (0) percent
  658. <7>[ 8288.743478] lm8502_mod_brightness: set LED1 brightness (0) percent
  659. <7>[ 8288.744423] lm8502_mod_brightness: set LED2 brightness (0) percent
  660. <3>[ 8288.748872] msm_wm8958_shutdown_power: codec power shutdown
  661. <3>[ 8288.748905] wm8994_ldo_power: Power down the WM8994 LDOs
  662. <3>[ 8288.748946] wm8994 4-001a: - MEOW wm8994_device_suspend
  663. <4>[ 8288.757469] max8903b_suspend: suspend
  664. <6>[ 8288.759995] PM: suspend of devices complete after 63.266 msecs
  665. <6>[ 8288.761532] PM: late suspend of devices complete after 1.501 msecs
  666. <4>[ 8288.761558] Disabling non-boot CPUs ...
  667. <6>[ 8288.764774] cpufreq: cpu 1 is not active.
  668. <6>[ 8288.782284] cpufreq: cpu 1 is not active.
  669. <4>[ 8288.840727] gic_show_resume_irq: 48 triggered
  670. <4>[ 8288.840727] gic_show_resume_irq: 52 triggered
  671. <4>[ 8288.840727] msm_gpio_show_resume_irq: irq 293/gpio 37 triggered wake
  672. <4>[ 8288.840911] Enabling non-boot CPUs ...
  673. <3>[ 8288.982317] lsm303dlh_mag_sysfs 0-001e: read transfer error
  674. <3>[ 8288.982345] lsm303dlh_mag_sysfs 0-001e: get_magnetometer_data failed
  675. <4>[ 8288.993075] CPU1 is up
  676. <6>[ 8288.993571] PM: early resume of devices complete after 0.462 msecs
  677. <6>[ 8289.059464] wakeup wake lock: mmc_delayed_work
  678. <4>[ 8289.060144] mmc1: queuing unknown CIS tuple 0x01 (3 bytes)
  679. <4>[ 8289.061145] mmc1: queuing unknown CIS tuple 0x1a (5 bytes)
  680. <4>[ 8289.061594] mmc1: queuing unknown CIS tuple 0x1b (8 bytes)
  681. <4>[ 8289.061705] mmc1: queuing unknown CIS tuple 0x14 (0 bytes)
  682. <4>[ 8289.062165] max8903b_resume: resume
  683. <3>[ 8289.104705] pm_op(): platform_pm_resume+0x0/0x4c returns -22
  684. <3>[ 8289.104737] PM: Device kgsl-2d1.1 failed to resume: error -22
  685. <3>[ 8289.109406] msm_wm8958_setup_power: codec power setup
  686. <3>[ 8289.109466] wm8994_ldo_power: Power up the WM8994 LDOs
  687. <7>[ 8289.160396] lm8502_mod_brightness: set LED1 brightness (0) percent
  688. <7>[ 8289.161184] lm8502_mod_brightness: set LED2 brightness (0) percent
  689. <6>[ 8289.168185] PM: resume of devices complete after 174.229 msecs
  690. <7>[ 8289.388621] lm8502_mod_brightness: set LED1 brightness (0) percent
  691. <7>[ 8289.394780] lm8502_mod_brightness: set LED2 brightness (0) percent
  692. <4>[ 8289.400937] Restarting tasks ... done.
  693. <3>[ 8289.553017] wm8994-codec wm8994-codec: - MEOW wm8994_resume
  694. <6>[ 8289.652842] suspend: exit suspend, ret = 0 (2015-04-22 17:20:46.985926222 UTC)
  695. <6>[ 8289.688994] PM: Syncing filesystems ... skipped for target platform ... done.
  696. <4>[ 8289.695334] Freezing user space processes ... (elapsed 0.02 seconds) done.
  697. <4>[ 8289.724230] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  698. <4>[ 8289.744118] Suspending console(s) (use no_console_suspend to debug)
  699. <3>[ 8289.762342] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
  700. <3>[ 8289.762362] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
  701. <3>[ 8289.762380] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
  702. <3>[ 8289.777165] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
  703. <3>[ 8289.777183] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
  704. <3>[ 8289.777199] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
  705. <7>[ 8289.777689] lm8502_mod_brightness: set LED2 brightness (0) percent
  706. <7>[ 8289.778047] lm8502_mod_brightness: set LED1 brightness (0) percent
  707. <7>[ 8289.786486] lm8502_mod_brightness: set LED1 brightness (0) percent
  708. <7>[ 8289.787382] lm8502_mod_brightness: set LED2 brightness (0) percent
  709. <3>[ 8289.791736] msm_wm8958_shutdown_power: codec power shutdown
  710. <3>[ 8289.791761] wm8994_ldo_power: Power down the WM8994 LDOs
  711. <3>[ 8289.791797] wm8994 4-001a: - MEOW wm8994_device_suspend
  712. <4>[ 8289.802602] max8903b_suspend: suspend
  713. <6>[ 8289.805421] PM: suspend of devices complete after 48.088 msecs
  714. <6>[ 8289.806893] PM: late suspend of devices complete after 1.443 msecs
  715. <4>[ 8289.806912] Disabling non-boot CPUs ...
  716. <4>[ 8289.877090] gic_show_resume_irq: 48 triggered
  717. <4>[ 8289.877090] gic_show_resume_irq: 52 triggered
  718. <4>[ 8289.877090] msm_gpio_show_resume_irq: irq 293/gpio 37 triggered wake
  719. <4>[ 8289.877212] Enabling non-boot CPUs ...
  720. <4>[ 8289.972899] CPU1 is up
  721. <6>[ 8289.973488] PM: early resume of devices complete after 0.561 msecs
  722. <6>[ 8290.039352] wakeup wake lock: mmc_delayed_work
  723. <4>[ 8290.039913] mmc1: queuing unknown CIS tuple 0x01 (3 bytes)
  724. <4>[ 8290.040702] mmc1: queuing unknown CIS tuple 0x1a (5 bytes)
  725. <4>[ 8290.041054] mmc1: queuing unknown CIS tuple 0x1b (8 bytes)
  726. <4>[ 8290.041140] mmc1: queuing unknown CIS tuple 0x14 (0 bytes)
  727. <4>[ 8290.041519] max8903b_resume: resume
  728. <3>[ 8290.086701] pm_op(): platform_pm_resume+0x0/0x4c returns -22
  729. <3>[ 8290.086721] PM: Device kgsl-2d1.1 failed to resume: error -22
  730. <3>[ 8290.090955] msm_wm8958_setup_power: codec power setup
  731. <3>[ 8290.091002] wm8994_ldo_power: Power up the WM8994 LDOs
  732. <7>[ 8290.140727] lm8502_mod_brightness: set LED1 brightness (0) percent
  733. <7>[ 8290.141451] lm8502_mod_brightness: set LED2 brightness (0) percent
  734. <6>[ 8290.146846] PM: resume of devices complete after 173.026 msecs
  735. <4>[ 8290.345970] Restarting tasks ...
  736. <7>[ 8290.356700] lm8502_mod_brightness: set LED1 brightness (0) percent
  737. <4>[ 8290.362088] done.
  738. <7>[ 8290.363714] lm8502_mod_brightness: set LED2 brightness (0) percent
  739. <3>[ 8290.512981] wm8994-codec wm8994-codec: - MEOW wm8994_resume
  740. <6>[ 8290.612708] suspend: exit suspend, ret = 0 (2015-04-22 17:21:02.966899555 UTC)
  741. <6>[ 8290.648361] PM: Syncing filesystems ... skipped for target platform ... done.
  742. <4>[ 8290.654648] Freezing user space processes ... (elapsed 0.03 seconds) done.
  743. <4>[ 8290.686753] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  744. <4>[ 8290.706668] Suspending console(s) (use no_console_suspend to debug)
  745. <3>[ 8290.727818] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
  746. <3>[ 8290.727839] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
  747. <3>[ 8290.727856] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
  748. <3>[ 8290.742753] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
  749. <3>[ 8290.742770] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
  750. <3>[ 8290.742787] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
  751. <7>[ 8290.743277] lm8502_mod_brightness: set LED2 brightness (0) percent
  752. <7>[ 8290.743634] lm8502_mod_brightness: set LED1 brightness (0) percent
  753. <7>[ 8290.752015] lm8502_mod_brightness: set LED1 brightness (0) percent
  754. <7>[ 8290.752913] lm8502_mod_brightness: set LED2 brightness (0) percent
  755. <3>[ 8290.757272] msm_wm8958_shutdown_power: codec power shutdown
  756. <3>[ 8290.757298] wm8994_ldo_power: Power down the WM8994 LDOs
  757. <3>[ 8290.757334] wm8994 4-001a: - MEOW wm8994_device_suspend
  758. <4>[ 8290.768035] max8903b_suspend: suspend
  759. <6>[ 8290.770311] PM: suspend of devices complete after 47.465 msecs
  760. <6>[ 8290.771779] PM: late suspend of devices complete after 1.440 msecs
  761. <4>[ 8290.771800] Disabling non-boot CPUs ...
  762. <4>[ 8290.836223] gic_show_resume_irq: 48 triggered
  763. <4>[ 8290.836223] gic_show_resume_irq: 52 triggered
  764. <4>[ 8290.836223] msm_gpio_show_resume_irq: irq 293/gpio 37 triggered wake
  765. <4>[ 8290.836345] Enabling non-boot CPUs ...
  766. <4>[ 8290.932905] CPU1 is up
  767. <6>[ 8290.933495] PM: early resume of devices complete after 0.561 msecs
  768. <3>[ 8290.942321] lsm303dlh_mag_sysfs 0-001e: read transfer error
  769. <3>[ 8290.942341] lsm303dlh_mag_sysfs 0-001e: get_magnetometer_data failed
  770. <6>[ 8290.999490] wakeup wake lock: mmc_delayed_work
  771. <4>[ 8291.000047] mmc1: queuing unknown CIS tuple 0x01 (3 bytes)
  772. <4>[ 8291.000837] mmc1: queuing unknown CIS tuple 0x1a (5 bytes)
  773. <4>[ 8291.001189] mmc1: queuing unknown CIS tuple 0x1b (8 bytes)
  774. <4>[ 8291.001274] mmc1: queuing unknown CIS tuple 0x14 (0 bytes)
  775. <4>[ 8291.001648] max8903b_resume: resume
  776. <3>[ 8291.046691] pm_op(): platform_pm_resume+0x0/0x4c returns -22
  777. <3>[ 8291.046712] PM: Device kgsl-2d1.1 failed to resume: error -22
  778. <3>[ 8291.050966] msm_wm8958_setup_power: codec power setup
  779. <3>[ 8291.051013] wm8994_ldo_power: Power up the WM8994 LDOs
  780. <7>[ 8291.100732] lm8502_mod_brightness: set LED1 brightness (0) percent
  781. <7>[ 8291.101455] lm8502_mod_brightness: set LED2 brightness (0) percent
  782. <6>[ 8291.106827] PM: resume of devices complete after 173.000 msecs
  783. <4>[ 8291.317017] Restarting tasks ...
  784. <7>[ 8291.326857] lm8502_mod_brightness: set LED1 brightness (0) percent
  785. <7>[ 8291.333617] lm8502_mod_brightness: set LED2 brightness (0) percent
  786. <4>[ 8291.336131] done.
  787. <3>[ 8291.482941] wm8994-codec wm8994-codec: - MEOW wm8994_resume
  788. <6>[ 8291.585305] suspend: exit suspend, ret = 0 (2015-04-22 17:21:18.979473333 UTC)
  789. <6>[ 8291.620508] PM: Syncing filesystems ... skipped for target platform ... done.
  790. <4>[ 8291.628929] Freezing user space processes ... (elapsed 0.02 seconds) done.
  791. <4>[ 8291.656554] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  792. <4>[ 8291.676506] Suspending console(s) (use no_console_suspend to debug)
  793. <3>[ 8291.690054] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
  794. <3>[ 8291.690084] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
  795. <3>[ 8291.690110] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
  796. <3>[ 8291.715171] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
  797. <3>[ 8291.715198] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
  798. <3>[ 8291.715222] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
  799. <7>[ 8291.715766] lm8502_mod_brightness: set LED2 brightness (0) percent
  800. <7>[ 8291.716140] lm8502_mod_brightness: set LED1 brightness (0) percent
  801. <7>[ 8291.727330] lm8502_mod_brightness: set LED1 brightness (0) percent
  802. <7>[ 8291.728275] lm8502_mod_brightness: set LED2 brightness (0) percent
  803. <3>[ 8291.732732] msm_wm8958_shutdown_power: codec power shutdown
  804. <3>[ 8291.732765] wm8994_ldo_power: Power down the WM8994 LDOs
  805. <3>[ 8291.732807] wm8994 4-001a: - MEOW wm8994_device_suspend
  806. <4>[ 8291.741250] max8903b_suspend: suspend
  807. <6>[ 8291.743774] PM: suspend of devices complete after 56.991 msecs
  808. <6>[ 8291.745317] PM: late suspend of devices complete after 1.506 msecs
  809. <4>[ 8291.745343] Disabling non-boot CPUs ...
  810. <6>[ 8291.754781] cpufreq: cpu 1 is not active.
  811. <6>[ 8291.764791] cpufreq: cpu 1 is not active.
  812. <4>[ 8291.820258] gic_show_resume_irq: 48 triggered
  813. <4>[ 8291.820258] gic_show_resume_irq: 52 triggered
  814. <4>[ 8291.820258] msm_gpio_show_resume_irq: irq 293/gpio 37 triggered wake
  815. <4>[ 8291.820443] Enabling non-boot CPUs ...
  816. <3>[ 8291.852345] lsm303dlh_mag_sysfs 0-001e: read transfer error
  817. <3>[ 8291.852374] lsm303dlh_mag_sysfs 0-001e: get_magnetometer_data failed
  818. <4>[ 8291.913076] CPU1 is up
  819. <6>[ 8291.913572] PM: early resume of devices complete after 0.462 msecs
  820. <6>[ 8291.979633] wakeup wake lock: mmc_delayed_work
  821. <4>[ 8291.980313] mmc1: queuing unknown CIS tuple 0x01 (3 bytes)
  822. <4>[ 8291.981314] mmc1: queuing unknown CIS tuple 0x1a (5 bytes)
  823. <4>[ 8291.981762] mmc1: queuing unknown CIS tuple 0x1b (8 bytes)
  824. <4>[ 8291.981874] mmc1: queuing unknown CIS tuple 0x14 (0 bytes)
  825. <4>[ 8291.982424] max8903b_resume: resume
  826. <3>[ 8292.024733] pm_op(): platform_pm_resume+0x0/0x4c returns -22
  827. <3>[ 8292.024764] PM: Device kgsl-2d1.1 failed to resume: error -22
  828. <3>[ 8292.029283] msm_wm8958_setup_power: codec power setup
  829. <3>[ 8292.029342] wm8994_ldo_power: Power up the WM8994 LDOs
  830. <7>[ 8292.080297] lm8502_mod_brightness: set LED1 brightness (0) percent
  831. <7>[ 8292.081086] lm8502_mod_brightness: set LED2 brightness (0) percent
  832. <6>[ 8292.088060] PM: resume of devices complete after 174.105 msecs
  833. <7>[ 8292.308494] lm8502_mod_brightness: set LED1 brightness (0) percent
  834. <7>[ 8292.314651] lm8502_mod_brightness: set LED2 brightness (0) percent
  835. <4>[ 8292.320812] Restarting tasks ... done.
  836. <3>[ 8292.482964] wm8994-codec wm8994-codec: - MEOW wm8994_resume
  837. <6>[ 8292.582808] suspend: exit suspend, ret = 0 (2015-04-22 17:21:33.996018518 UTC)
  838. <6>[ 8292.621391] PM: Syncing filesystems ... skipped for target platform ... done.
  839. <4>[ 8292.630707] Freezing user space processes ... (elapsed 0.02 seconds) done.
  840. <4>[ 8292.656564] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  841. <4>[ 8292.676501] Suspending console(s) (use no_console_suspend to debug)
  842. <3>[ 8292.690933] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
  843. <3>[ 8292.690946] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
  844. <3>[ 8292.690958] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
  845. <3>[ 8292.700829] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
  846. <3>[ 8292.700841] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
  847. <3>[ 8292.700852] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
  848. <7>[ 8292.701269] lm8502_mod_brightness: set LED2 brightness (0) percent
  849. <7>[ 8292.701599] lm8502_mod_brightness: set LED1 brightness (0) percent
  850. <7>[ 8292.706912] lm8502_mod_brightness: set LED1 brightness (0) percent
  851. <7>[ 8292.707734] lm8502_mod_brightness: set LED2 brightness (0) percent
  852. <3>[ 8292.711899] msm_wm8958_shutdown_power: codec power shutdown
  853. <3>[ 8292.711916] wm8994_ldo_power: Power down the WM8994 LDOs
  854. <3>[ 8292.711938] wm8994 4-001a: - MEOW wm8994_device_suspend
  855. <4>[ 8292.718624] max8903b_suspend: suspend
  856. <6>[ 8292.720484] PM: suspend of devices complete after 33.778 msecs
  857. <6>[ 8292.721414] PM: late suspend of devices complete after 0.912 msecs
  858. <4>[ 8292.721427] Disabling non-boot CPUs ...
  859. <6>[ 8292.724805] cpufreq: cpu 1 is not active.
  860. <4>[ 8292.838290] gic_show_resume_irq: 48 triggered
  861. <4>[ 8292.838290] gic_show_resume_irq: 52 triggered
  862. <4>[ 8292.838290] msm_gpio_show_resume_irq: irq 293/gpio 37 triggered wake
  863. <4>[ 8292.838377] Enabling non-boot CPUs ...
  864. <4>[ 8292.932675] CPU1 is up
  865. <6>[ 8292.933041] PM: early resume of devices complete after 0.348 msecs
  866. <3>[ 8292.962295] lsm303dlh_mag_sysfs 0-001e: read transfer error
  867. <3>[ 8292.962308] lsm303dlh_mag_sysfs 0-001e: get_magnetometer_data failed
  868. <6>[ 8292.999268] wakeup wake lock: mmc_delayed_work
  869. <4>[ 8292.999657] mmc1: queuing unknown CIS tuple 0x01 (3 bytes)
  870. <4>[ 8293.000185] mmc1: queuing unknown CIS tuple 0x1a (5 bytes)
  871. <4>[ 8293.000420] mmc1: queuing unknown CIS tuple 0x1b (8 bytes)
  872. <4>[ 8293.000476] mmc1: queuing unknown CIS tuple 0x14 (0 bytes)
  873. <4>[ 8293.000738] max8903b_resume: resume
  874. <3>[ 8293.034379] pm_op(): platform_pm_resume+0x0/0x4c returns -22
  875. <3>[ 8293.034393] PM: Device kgsl-2d1.1 failed to resume: error -22
  876. <3>[ 8293.038069] msm_wm8958_setup_power: codec power setup
  877. <3>[ 8293.038102] wm8994_ldo_power: Power up the WM8994 LDOs
  878. <7>[ 8293.086862] lm8502_mod_brightness: set LED1 brightness (0) percent
  879. <7>[ 8293.087538] lm8502_mod_brightness: set LED2 brightness (0) percent
  880. <6>[ 8293.091012] PM: resume of devices complete after 157.725 msecs
  881. <4>[ 8293.303084] Restarting tasks ...
  882. <7>[ 8293.303528] lm8502_mod_brightness: set LED1 brightness (0) percent
  883. <4>[ 8293.319835] done.
  884. <6>[ 8293.320011] suspend: exit suspend, ret = 0 (2015-04-22 17:21:49.729722519 UTC)
  885. <7>[ 8293.320390] lm8502_mod_brightness: set LED2 brightness (0) percent
  886. <3>[ 8293.452998] wm8994-codec wm8994-codec: - MEOW wm8994_resume
  887. <6>[ 8293.588816] PM: Syncing filesystems ... skipped for target platform ... done.
  888. <4>[ 8293.595774] Freezing user space processes ... (elapsed 0.01 seconds) done.
  889. <4>[ 8293.616599] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  890. <4>[ 8293.636502] Suspending console(s) (use no_console_suspend to debug)
  891. <3>[ 8293.650713] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
  892. <3>[ 8293.650725] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
  893. <3>[ 8293.650734] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
  894. <3>[ 8293.658793] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
  895. <3>[ 8293.658802] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
  896. <3>[ 8293.658811] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
  897. <7>[ 8293.659215] lm8502_mod_brightness: set LED2 brightness (0) percent
  898. <7>[ 8293.659538] lm8502_mod_brightness: set LED1 brightness (0) percent
  899. <7>[ 8293.664085] lm8502_mod_brightness: set LED1 brightness (0) percent
  900. <7>[ 8293.664894] lm8502_mod_brightness: set LED2 brightness (0) percent
  901. <3>[ 8293.669024] msm_wm8958_shutdown_power: codec power shutdown
  902. <3>[ 8293.669039] wm8994_ldo_power: Power down the WM8994 LDOs
  903. <3>[ 8293.669060] wm8994 4-001a: - MEOW wm8994_device_suspend
  904. <4>[ 8293.675316] max8903b_suspend: suspend
  905. <6>[ 8293.677090] PM: suspend of devices complete after 30.416 msecs
  906. <6>[ 8293.677943] PM: late suspend of devices complete after 0.836 msecs
  907. <4>[ 8293.677955] Disabling non-boot CPUs ...
  908. <6>[ 8293.684818] cpufreq: cpu 1 is not active.
  909. <6>[ 8293.702299] cpufreq: cpu 1 is not active.
  910. <6>[ 8293.722295] cpufreq: cpu 1 is not active.
  911. <6>[ 8293.742306] cpufreq: cpu 1 is not active.
  912. <4>[ 8293.754748] gic_show_resume_irq: 48 triggered
  913. <4>[ 8293.754748] gic_show_resume_irq: 52 triggered
  914. <4>[ 8293.754748] msm_gpio_show_resume_irq: irq 293/gpio 37 triggered wake
  915. <4>[ 8293.754814] Enabling non-boot CPUs ...
  916. <3>[ 8293.872291] lsm303dlh_mag_sysfs 0-001e: read transfer error
  917. <3>[ 8293.872304] lsm303dlh_mag_sysfs 0-001e: get_magnetometer_data failed
  918. <4>[ 8293.922588] CPU1 is up
  919. <6>[ 8293.922940] PM: early resume of devices complete after 0.335 msecs
  920. <6>[ 8293.989120] wakeup wake lock: mmc_delayed_work
  921. <4>[ 8293.989477] mmc1: queuing unknown CIS tuple 0x01 (3 bytes)
  922. <4>[ 8293.989951] mmc1: queuing unknown CIS tuple 0x1a (5 bytes)
  923. <4>[ 8293.990162] mmc1: queuing unknown CIS tuple 0x1b (8 bytes)
  924. <4>[ 8293.990212] mmc1: queuing unknown CIS tuple 0x14 (0 bytes)
  925. <4>[ 8293.990451] max8903b_resume: resume
  926. <3>[ 8294.024086] pm_op(): platform_pm_resume+0x0/0x4c returns -22
  927. <3>[ 8294.024099] PM: Device kgsl-2d1.1 failed to resume: error -22
  928. <3>[ 8294.027590] msm_wm8958_setup_power: codec power setup
  929. <3>[ 8294.027620] wm8994_ldo_power: Power up the WM8994 LDOs
  930. <7>[ 8294.076126] lm8502_mod_brightness: set LED1 brightness (0) percent
  931. <7>[ 8294.076798] lm8502_mod_brightness: set LED2 brightness (0) percent
  932. <6>[ 8294.079886] PM: resume of devices complete after 156.741 msecs
  933. <4>[ 8294.304027] Restarting tasks ...
  934. <7>[ 8294.304454] lm8502_mod_brightness: set LED1 brightness (0) percent
  935. <7>[ 8294.320538] lm8502_mod_brightness: set LED2 brightness (0) percent
  936. <4>[ 8294.320593] done.
  937. <3>[ 8294.462971] wm8994-codec wm8994-codec: - MEOW wm8994_resume
  938. <6>[ 8294.564947] suspend: exit suspend, ret = 0 (2015-04-22 17:22:05.985718814 UTC)
  939. <6>[ 8294.597815] PM: Syncing filesystems ... skipped for target platform ... done.
  940. <4>[ 8294.604243] Freezing user space processes ... (elapsed 0.03 seconds) done.
  941. <4>[ 8294.636751] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  942. <4>[ 8294.656704] Suspending console(s) (use no_console_suspend to debug)
  943. <3>[ 8294.685720] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
  944. <3>[ 8294.685750] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
  945. <3>[ 8294.685777] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
  946. <3>[ 8294.710840] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
  947. <3>[ 8294.710869] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
  948. <3>[ 8294.710895] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
  949. <7>[ 8294.711486] lm8502_mod_brightness: set LED2 brightness (0) percent
  950. <7>[ 8294.711875] lm8502_mod_brightness: set LED1 brightness (0) percent
  951. <7>[ 8294.725073] lm8502_mod_brightness: set LED1 brightness (0) percent
  952. <7>[ 8294.726065] lm8502_mod_brightness: set LED2 brightness (0) percent
  953. <3>[ 8294.730628] msm_wm8958_shutdown_power: codec power shutdown
  954. <3>[ 8294.730665] wm8994_ldo_power: Power down the WM8994 LDOs
  955. <3>[ 8294.730715] wm8994 4-001a: - MEOW wm8994_device_suspend
  956. <4>[ 8294.740899] max8903b_suspend: suspend
  957. <6>[ 8294.744345] PM: suspend of devices complete after 70.792 msecs
  958. <6>[ 8294.746213] PM: late suspend of devices complete after 1.828 msecs
  959. <4>[ 8294.746242] Disabling non-boot CPUs ...
  960. <4>[ 8294.818791] gic_show_resume_irq: 48 triggered
  961. <4>[ 8294.818791] gic_show_resume_irq: 52 triggered
  962. <4>[ 8294.818791] msm_gpio_show_resume_irq: irq 293/gpio 37 triggered wake
  963. <4>[ 8294.818937] Enabling non-boot CPUs ...
  964. <4>[ 8294.913236] CPU1 is up
  965. <6>[ 8294.913832] PM: early resume of devices complete after 0.558 msecs
  966. <6>[ 8294.980114] wakeup wake lock: mmc_delayed_work
  967. <4>[ 8294.980878] mmc1: queuing unknown CIS tuple 0x01 (3 bytes)
  968. <4>[ 8294.982014] mmc1: queuing unknown CIS tuple 0x1a (5 bytes)
  969. <3>[ 8294.982369] lsm303dlh_mag_sysfs 0-001e: read transfer error
  970. <3>[ 8294.982396] lsm303dlh_mag_sysfs 0-001e: get_magnetometer_data failed
  971. <4>[ 8294.982722] mmc1: queuing unknown CIS tuple 0x1b (8 bytes)
  972. <4>[ 8294.982852] mmc1: queuing unknown CIS tuple 0x14 (0 bytes)
  973. <4>[ 8294.983377] max8903b_resume: resume
  974. <3>[ 8295.026002] pm_op(): platform_pm_resume+0x0/0x4c returns -22
  975. <3>[ 8295.026036] PM: Device kgsl-2d1.1 failed to resume: error -22
  976. <3>[ 8295.031077] msm_wm8958_setup_power: codec power setup
  977. <3>[ 8295.031146] wm8994_ldo_power: Power up the WM8994 LDOs
  978. <7>[ 8295.082936] lm8502_mod_brightness: set LED1 brightness (0) percent
  979. <7>[ 8295.083765] lm8502_mod_brightness: set LED2 brightness (0) percent
  980. <6>[ 8295.092208] PM: resume of devices complete after 177.982 msecs
  981. <4>[ 8295.306655] Restarting tasks ...
  982. <7>[ 8295.309249] lm8502_mod_brightness: set LED1 brightness (0) percent
  983. <7>[ 8295.316486] lm8502_mod_brightness: set LED2 brightness (0) percent
  984. <4>[ 8295.320323] done.
  985. <6>[ 8295.324132] suspend: exit suspend, ret = 0 (2015-04-22 17:22:21.733457630 UTC)
  986. <3>[ 8295.462998] wm8994-codec wm8994-codec: - MEOW wm8994_resume
  987. <6>[ 8295.607185] PM: Syncing filesystems ... skipped for target platform ... done.
  988. <4>[ 8295.613493] Freezing user space processes ... (elapsed 0.03 seconds) done.
  989. <4>[ 8295.646957] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  990. <4>[ 8295.666809] Suspending console(s) (use no_console_suspend to debug)
  991. <3>[ 8295.696921] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
  992. <3>[ 8295.696954] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
  993. <3>[ 8295.696983] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
  994. <3>[ 8295.722104] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
  995. <3>[ 8295.722133] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
  996. <3>[ 8295.722160] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
  997. <7>[ 8295.722882] lm8502_mod_brightness: set LED2 brightness (0) percent
  998. <7>[ 8295.723278] lm8502_mod_brightness: set LED1 brightness (0) percent
  999. <7>[ 8295.737114] lm8502_mod_brightness: set LED1 brightness (0) percent
  1000. <7>[ 8295.738126] lm8502_mod_brightness: set LED2 brightness (0) percent
  1001. <3>[ 8295.742768] msm_wm8958_shutdown_power: codec power shutdown
  1002. <3>[ 8295.742809] wm8994_ldo_power: Power down the WM8994 LDOs
  1003. <3>[ 8295.742864] wm8994 4-001a: - MEOW wm8994_device_suspend
  1004. <4>[ 8295.754977] max8903b_suspend: suspend
  1005. <6>[ 8295.758480] PM: suspend of devices complete after 74.165 msecs
  1006. <6>[ 8295.760757] PM: late suspend of devices complete after 2.232 msecs
  1007. <4>[ 8295.760791] Disabling non-boot CPUs ...
  1008. <4>[ 8295.828842] gic_show_resume_irq: 48 triggered
  1009. <4>[ 8295.828842] gic_show_resume_irq: 52 triggered
  1010. <4>[ 8295.828842] msm_gpio_show_resume_irq: irq 344/gpio 88 triggered wake
  1011. <4>[ 8295.828842] pm8058_show_resume_irq:468 triggered
  1012. <4>[ 8295.829029] Enabling non-boot CPUs ...
  1013. <3>[ 8295.892388] lsm303dlh_mag_sysfs 0-001e: read transfer error
  1014. <3>[ 8295.892425] lsm303dlh_mag_sysfs 0-001e: get_magnetometer_data failed
  1015. <4>[ 8295.923321] CPU1 is up
  1016. <6>[ 8295.924177] PM: early resume of devices complete after 0.814 msecs
  1017. <6>[ 8295.924561] wakeup wake lock: alarm_rtc
  1018. <4>[ 8295.991218] mmc1: queuing unknown CIS tuple 0x01 (3 bytes)
  1019. <4>[ 8295.992556] mmc1: queuing unknown CIS tuple 0x1a (5 bytes)
  1020. <4>[ 8295.993108] mmc1: queuing unknown CIS tuple 0x1b (8 bytes)
  1021. <4>[ 8295.993241] mmc1: queuing unknown CIS tuple 0x14 (0 bytes)
  1022. <4>[ 8295.993801] max8903b_resume: resume
  1023. <3>[ 8296.037250] pm_op(): platform_pm_resume+0x0/0x4c returns -22
  1024. <3>[ 8296.037285] PM: Device kgsl-2d1.1 failed to resume: error -22
  1025. <3>[ 8296.042133] msm_wm8958_setup_power: codec power setup
  1026. <3>[ 8296.042207] wm8994_ldo_power: Power up the WM8994 LDOs
  1027. <7>[ 8296.093857] lm8502_mod_brightness: set LED1 brightness (0) percent
  1028. <7>[ 8296.094692] lm8502_mod_brightness: set LED2 brightness (0) percent
  1029. <6>[ 8296.103208] PM: resume of devices complete after 178.289 msecs
  1030. <4>[ 8296.322105] Restarting tasks ...
  1031. <7>[ 8296.325961] lm8502_mod_brightness: set LED1 brightness (0) percent
  1032. <7>[ 8296.331663] lm8502_mod_brightness: set LED2 brightness (0) percent
  1033. <4>[ 8296.338105] done.
  1034. <6>[ 8296.339439] suspend: exit suspend, ret = 0 (2015-04-22 17:22:24.737885333 UTC)
  1035. <3>[ 8296.482962] wm8994-codec wm8994-codec: - MEOW wm8994_resume
  1036. <6>[ 8296.774393] PM: Syncing filesystems ... skipped for target platform ... done.
  1037. <4>[ 8296.780936] Freezing user space processes ... (elapsed 0.03 seconds) done.
  1038. <4>[ 8296.814456] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  1039. <4>[ 8296.834346] Suspending console(s) (use no_console_suspend to debug)
  1040. <3>[ 8296.864441] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
  1041. <3>[ 8296.864474] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
  1042. <3>[ 8296.864502] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
  1043. <3>[ 8296.889567] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
  1044. <3>[ 8296.889596] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
  1045. <3>[ 8296.889623] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
  1046. <7>[ 8296.890241] lm8502_mod_brightness: set LED2 brightness (0) percent
  1047. <7>[ 8296.890640] lm8502_mod_brightness: set LED1 brightness (0) percent
  1048. <7>[ 8296.904469] lm8502_mod_brightness: set LED1 brightness (0) percent
  1049. <7>[ 8296.905445] lm8502_mod_brightness: set LED2 brightness (0) percent
  1050. <3>[ 8296.909956] msm_wm8958_shutdown_power: codec power shutdown
  1051. <3>[ 8296.909997] wm8994_ldo_power: Power down the WM8994 LDOs
  1052. <3>[ 8296.910052] wm8994 4-001a: - MEOW wm8994_device_suspend
  1053. <4>[ 8296.922570] max8903b_suspend: suspend
  1054. <6>[ 8296.926034] PM: suspend of devices complete after 74.159 msecs
  1055. <6>[ 8296.928280] PM: late suspend of devices complete after 2.201 msecs
  1056. <4>[ 8296.928311] Disabling non-boot CPUs ...
  1057. <4>[ 8296.998602] gic_show_resume_irq: 48 triggered
  1058. <4>[ 8296.998602] gic_show_resume_irq: 52 triggered
  1059. <4>[ 8296.998602] msm_gpio_show_resume_irq: irq 293/gpio 37 triggered wake
  1060. <4>[ 8296.998786] Enabling non-boot CPUs ...
  1061. <4>[ 8297.093351] CPU1 is up
  1062. <6>[ 8297.094209] PM: early resume of devices complete after 0.814 msecs
  1063. <6>[ 8297.160476] wakeup wake lock: mmc_delayed_work
  1064. <4>[ 8297.161307] mmc1: queuing unknown CIS tuple 0x01 (3 bytes)
  1065. <4>[ 8297.162643] mmc1: queuing unknown CIS tuple 0x1a (5 bytes)
  1066. <4>[ 8297.163194] mmc1: queuing unknown CIS tuple 0x1b (8 bytes)
  1067. <4>[ 8297.163328] mmc1: queuing unknown CIS tuple 0x14 (0 bytes)
  1068. <4>[ 8297.163890] max8903b_resume: resume
  1069. <3>[ 8297.207252] pm_op(): platform_pm_resume+0x0/0x4c returns -22
  1070. <3>[ 8297.207287] PM: Device kgsl-2d1.1 failed to resume: error -22
  1071. <3>[ 8297.212118] msm_wm8958_setup_power: codec power setup
  1072. <3>[ 8297.212187] wm8994_ldo_power: Power up the WM8994 LDOs
  1073. <7>[ 8297.263613] lm8502_mod_brightness: set LED1 brightness (0) percent
  1074. <7>[ 8297.264422] lm8502_mod_brightness: set LED2 brightness (0) percent
  1075. <6>[ 8297.272984] PM: resume of devices complete after 178.200 msecs
  1076. <7>[ 8297.368611] lm8502_mod_brightness: set LED1 brightness (0) percent
  1077. <7>[ 8297.369029] lm8502_mod_brightness: set LED2 brightness (0) percent
  1078. <4>[ 8297.487724] Restarting tasks ... done.
  1079. <3>[ 8297.513026] wm8994-codec wm8994-codec: - MEOW wm8994_resume
  1080. <6>[ 8297.567232] suspend: exit suspend, ret = 0 (2015-04-22 17:22:40.795917037 UTC)
  1081. <6>[ 8297.569949] PM: Syncing filesystems ... skipped for target platform ... done.
  1082. <4>[ 8297.580781] Freezing user space processes ... (elapsed 0.03 seconds) done.
  1083. <4>[ 8297.614091] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  1084. <4>[ 8297.634032] Suspending console(s) (use no_console_suspend to debug)
  1085. <3>[ 8297.648322] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
  1086. <3>[ 8297.648334] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
  1087. <3>[ 8297.648343] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
  1088. <3>[ 8297.656437] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
  1089. <3>[ 8297.656446] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
  1090. <3>[ 8297.656456] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
  1091. <7>[ 8297.656856] lm8502_mod_brightness: set LED2 brightness (0) percent
  1092. <7>[ 8297.657180] lm8502_mod_brightness: set LED1 brightness (0) percent
  1093. <7>[ 8297.661681] lm8502_mod_brightness: set LED1 brightness (0) percent
  1094. <7>[ 8297.662475] lm8502_mod_brightness: set LED2 brightness (0) percent
  1095. <3>[ 8297.666581] msm_wm8958_shutdown_power: codec power shutdown
  1096. <3>[ 8297.666596] wm8994_ldo_power: Power down the WM8994 LDOs
  1097. <3>[ 8297.666618] wm8994 4-001a: - MEOW wm8994_device_suspend
  1098. <4>[ 8297.670510] max8903b_suspend: suspend
  1099. <6>[ 8297.672363] PM: suspend of devices complete after 28.075 msecs
  1100. <6>[ 8297.673215] PM: late suspend of devices complete after 0.836 msecs
  1101. <4>[ 8297.673227] Disabling non-boot CPUs ...
  1102. <4>[ 8297.734732] gic_show_resume_irq: 48 triggered
  1103. <4>[ 8297.734732] gic_show_resume_irq: 52 triggered
  1104. <4>[ 8297.734732] msm_gpio_show_resume_irq: irq 293/gpio 37 triggered wake
  1105. <4>[ 8297.734797] Enabling non-boot CPUs ...
  1106. <4>[ 8297.832652] CPU1 is up
  1107. <6>[ 8297.833004] PM: early resume of devices complete after 0.336 msecs
  1108. <3>[ 8297.882310] lsm303dlh_mag_sysfs 0-001e: read transfer error
  1109. <3>[ 8297.882321] lsm303dlh_mag_sysfs 0-001e: get_magnetometer_data failed
  1110. <6>[ 8297.899246] wakeup wake lock: mmc_delayed_work
  1111. <4>[ 8297.899599] mmc1: queuing unknown CIS tuple 0x01 (3 bytes)
  1112. <4>[ 8297.900073] mmc1: queuing unknown CIS tuple 0x1a (5 bytes)
  1113. <4>[ 8297.900284] mmc1: queuing unknown CIS tuple 0x1b (8 bytes)
  1114. <4>[ 8297.900335] mmc1: queuing unknown CIS tuple 0x14 (0 bytes)
  1115. <4>[ 8297.900574] max8903b_resume: resume
  1116. <3>[ 8297.934368] pm_op(): platform_pm_resume+0x0/0x4c returns -22
  1117. <3>[ 8297.934380] PM: Device kgsl-2d1.1 failed to resume: error -22
  1118. <3>[ 8297.937939] msm_wm8958_setup_power: codec power setup
  1119. <3>[ 8297.937969] wm8994_ldo_power: Power up the WM8994 LDOs
  1120. <7>[ 8297.986517] lm8502_mod_brightness: set LED1 brightness (0) percent
  1121. <7>[ 8297.987181] lm8502_mod_brightness: set LED2 brightness (0) percent
  1122. <6>[ 8297.990241] PM: resume of devices complete after 157.036 msecs
  1123. <7>[ 8298.118866] lm8502_mod_brightness: set LED1 brightness (0) percent
  1124. <7>[ 8298.119207] lm8502_mod_brightness: set LED2 brightness (0) percent
  1125. <4>[ 8298.209346] Restarting tasks ... done.
  1126. <6>[ 8298.227039] suspend: exit suspend, ret = 0 (2015-04-22 17:22:55.737440148 UTC)
  1127. <3>[ 8298.252923] wm8994-codec wm8994-codec: - MEOW wm8994_resume
  1128. <6>[ 8298.314331] PM: Syncing filesystems ... skipped for target platform ... done.
  1129. <4>[ 8298.323070] Freezing user space processes ... (elapsed 0.02 seconds) done.
  1130. <4>[ 8298.346592] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  1131. <4>[ 8298.366532] Suspending console(s) (use no_console_suspend to debug)
  1132. <3>[ 8298.381902] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
  1133. <3>[ 8298.381928] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
  1134. <3>[ 8298.381951] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
  1135. <3>[ 8298.404260] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
  1136. <3>[ 8298.404284] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
  1137. <3>[ 8298.404306] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
  1138. <7>[ 8298.404825] lm8502_mod_brightness: set LED2 brightness (0) percent
  1139. <7>[ 8298.405193] lm8502_mod_brightness: set LED1 brightness (0) percent
  1140. <7>[ 8298.415134] lm8502_mod_brightness: set LED1 brightness (0) percent
  1141. <7>[ 8298.416056] lm8502_mod_brightness: set LED2 brightness (0) percent
  1142. <3>[ 8298.420454] msm_wm8958_shutdown_power: codec power shutdown
  1143. <3>[ 8298.420484] wm8994_ldo_power: Power down the WM8994 LDOs
  1144. <3>[ 8298.420523] wm8994 4-001a: - MEOW wm8994_device_suspend
  1145. <4>[ 8298.426106] max8903b_suspend: suspend
  1146. <6>[ 8298.428536] PM: suspend of devices complete after 51.815 msecs
  1147. <6>[ 8298.429958] PM: late suspend of devices complete after 1.389 msecs
  1148. <4>[ 8298.429982] Disabling non-boot CPUs ...
  1149. <6>[ 8298.434826] cpufreq: cpu 1 is not active.
  1150. <6>[ 8298.452338] cpufreq: cpu 1 is not active.
  1151. <4>[ 8298.509538] gic_show_resume_irq: 48 triggered
  1152. <4>[ 8298.509538] gic_show_resume_irq: 52 triggered
  1153. <4>[ 8298.509538] msm_gpio_show_resume_irq: irq 293/gpio 37 triggered wake
  1154. <4>[ 8298.509714] Enabling non-boot CPUs ...
  1155. <3>[ 8298.592371] lsm303dlh_mag_sysfs 0-001e: read transfer error
  1156. <3>[ 8298.592397] lsm303dlh_mag_sysfs 0-001e: get_magnetometer_data failed
  1157. <4>[ 8298.663044] CPU1 is up
  1158. <6>[ 8298.663516] PM: early resume of devices complete after 0.442 msecs
  1159. <6>[ 8298.729432] wakeup wake lock: mmc_delayed_work
  1160. <4>[ 8298.730056] mmc1: queuing unknown CIS tuple 0x01 (3 bytes)
  1161. <4>[ 8298.730971] mmc1: queuing unknown CIS tuple 0x1a (5 bytes)
  1162. <4>[ 8298.731381] mmc1: queuing unknown CIS tuple 0x1b (8 bytes)
  1163. <4>[ 8298.731482] mmc1: queuing unknown CIS tuple 0x14 (0 bytes)
  1164. <4>[ 8298.731900] max8903b_resume: resume
  1165. <3>[ 8298.774669] pm_op(): platform_pm_resume+0x0/0x4c returns -22
  1166. <3>[ 8298.774697] PM: Device kgsl-2d1.1 failed to resume: error -22
  1167. <3>[ 8298.779207] msm_wm8958_setup_power: codec power setup
  1168. <3>[ 8298.779266] wm8994_ldo_power: Power up the WM8994 LDOs
  1169. <7>[ 8298.829696] lm8502_mod_brightness: set LED1 brightness (0) percent
  1170. <7>[ 8298.830463] lm8502_mod_brightness: set LED2 brightness (0) percent
  1171. <6>[ 8298.836857] PM: resume of devices complete after 172.986 msecs
  1172. <4>[ 8299.057112] Restarting tasks ...
  1173. <7>[ 8299.057682] lm8502_mod_brightness: set LED1 brightness (0) percent
  1174. <7>[ 8299.076643] lm8502_mod_brightness: set LED2 brightness (0) percent
  1175. <4>[ 8299.080289] done.
  1176. <3>[ 8299.213108] wm8994-codec wm8994-codec: - MEOW wm8994_resume
  1177. <6>[ 8299.317234] suspend: exit suspend, ret = 0 (2015-04-22 17:23:11.981548889 UTC)
  1178. <6>[ 8299.350629] PM: Syncing filesystems ... skipped for target platform ... done.
  1179. <4>[ 8299.356944] Freezing user space processes ... (elapsed 0.01 seconds) done.
  1180. <4>[ 8299.376603] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  1181. <4>[ 8299.396534] Suspending console(s) (use no_console_suspend to debug)
  1182. <3>[ 8299.412166] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
  1183. <3>[ 8299.412196] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
  1184. <3>[ 8299.412222] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
  1185. <3>[ 8299.437464] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
  1186. <3>[ 8299.437490] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
  1187. <3>[ 8299.437516] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
  1188. <7>[ 8299.438053] lm8502_mod_brightness: set LED2 brightness (0) percent
  1189. <7>[ 8299.438429] lm8502_mod_brightness: set LED1 brightness (0) percent
  1190. <7>[ 8299.449461] lm8502_mod_brightness: set LED1 brightness (0) percent
  1191. <7>[ 8299.450405] lm8502_mod_brightness: set LED2 brightness (0) percent
  1192. <3>[ 8299.454865] msm_wm8958_shutdown_power: codec power shutdown
  1193. <3>[ 8299.454898] wm8994_ldo_power: Power down the WM8994 LDOs
  1194. <3>[ 8299.454942] wm8994 4-001a: - MEOW wm8994_device_suspend
  1195. <4>[ 8299.463366] max8903b_suspend: suspend
  1196. <6>[ 8299.465889] PM: suspend of devices complete after 59.168 msecs
  1197. <6>[ 8299.467425] PM: late suspend of devices complete after 1.500 msecs
  1198. <4>[ 8299.467450] Disabling non-boot CPUs ...
  1199. <6>[ 8299.474825] cpufreq: cpu 1 is not active.
  1200. <6>[ 8299.484836] cpufreq: cpu 1 is not active.
  1201. <4>[ 8299.541256] gic_show_resume_irq: 48 triggered
  1202. <4>[ 8299.541256] gic_show_resume_irq: 52 triggered
  1203. <4>[ 8299.541256] msm_gpio_show_resume_irq: irq 293/gpio 37 triggered wake
  1204. <4>[ 8299.541441] Enabling non-boot CPUs ...
  1205. <4>[ 8299.633163] CPU1 is up
  1206. <6>[ 8299.633660] PM: early resume of devices complete after 0.463 msecs
  1207. <6>[ 8299.699674] wakeup wake lock: mmc_delayed_work
  1208. <4>[ 8299.700353] mmc1: queuing unknown CIS tuple 0x01 (3 bytes)
  1209. <4>[ 8299.701355] mmc1: queuing unknown CIS tuple 0x1a (5 bytes)
  1210. <4>[ 8299.701803] mmc1: queuing unknown CIS tuple 0x1b (8 bytes)
  1211. <4>[ 8299.701914] mmc1: queuing unknown CIS tuple 0x14 (0 bytes)
  1212. <4>[ 8299.702466] max8903b_resume: resume
  1213. <3>[ 8299.712393] lsm303dlh_mag_sysfs 0-001e: read transfer error
  1214. <3>[ 8299.712420] lsm303dlh_mag_sysfs 0-001e: get_magnetometer_data failed
  1215. <3>[ 8299.744738] pm_op(): platform_pm_resume+0x0/0x4c returns -22
  1216. <3>[ 8299.744769] PM: Device kgsl-2d1.1 failed to resume: error -22
  1217. <3>[ 8299.749437] msm_wm8958_setup_power: codec power setup
  1218. <3>[ 8299.749501] wm8994_ldo_power: Power up the WM8994 LDOs
  1219. <7>[ 8299.800436] lm8502_mod_brightness: set LED1 brightness (0) percent
  1220. <7>[ 8299.801226] lm8502_mod_brightness: set LED2 brightness (0) percent
  1221. <6>[ 8299.808202] PM: resume of devices complete after 174.156 msecs
  1222. <7>[ 8300.028640] lm8502_mod_brightness: set LED1 brightness (0) percent
  1223. <7>[ 8300.034796] lm8502_mod_brightness: set LED2 brightness (0) percent
  1224. <4>[ 8300.040954] Restarting tasks ... done.
  1225. <6>[ 8300.048155] suspend: exit suspend, ret = 0 (2015-04-22 17:23:27.741233927 UTC)
  1226. <3>[ 8300.182979] wm8994-codec wm8994-codec: - MEOW wm8994_resume
  1227. <6>[ 8300.318111] PM: Syncing filesystems ... skipped for target platform ... done.
  1228. <4>[ 8300.324396] Freezing user space processes ... (elapsed 0.03 seconds) done.
  1229. <4>[ 8300.356786] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  1230. <4>[ 8300.376744] Suspending console(s) (use no_console_suspend to debug)
  1231. <3>[ 8300.405631] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
  1232. <3>[ 8300.405662] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
  1233. <3>[ 8300.405690] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
  1234. <3>[ 8300.430719] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
  1235. <3>[ 8300.430747] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
  1236. <3>[ 8300.430773] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
  1237. <7>[ 8300.431368] lm8502_mod_brightness: set LED2 brightness (0) percent
  1238. <7>[ 8300.431759] lm8502_mod_brightness: set LED1 brightness (0) percent
  1239. <7>[ 8300.445137] lm8502_mod_brightness: set LED1 brightness (0) percent
  1240. <7>[ 8300.446125] lm8502_mod_brightness: set LED2 brightness (0) percent
  1241. <3>[ 8300.450687] msm_wm8958_shutdown_power: codec power shutdown
  1242. <3>[ 8300.450724] wm8994_ldo_power: Power down the WM8994 LDOs
  1243. <3>[ 8300.450770] wm8994 4-001a: - MEOW wm8994_device_suspend
  1244. <4>[ 8300.460934] max8903b_suspend: suspend
  1245. <6>[ 8300.464382] PM: suspend of devices complete after 70.933 msecs
  1246. <6>[ 8300.466254] PM: late suspend of devices complete after 1.831 msecs
  1247. <4>[ 8300.466282] Disabling non-boot CPUs ...
  1248. <4>[ 8300.538245] gic_show_resume_irq: 48 triggered
  1249. <4>[ 8300.538245] gic_show_resume_irq: 52 triggered
  1250. <4>[ 8300.538245] msm_gpio_show_resume_irq: irq 293/gpio 37 triggered wake
  1251. <4>[ 8300.538392] Enabling non-boot CPUs ...
  1252. <3>[ 8300.612396] lsm303dlh_mag_sysfs 0-001e: read transfer error
  1253. <3>[ 8300.612428] lsm303dlh_mag_sysfs 0-001e: get_magnetometer_data failed
  1254. <4>[ 8300.633264] CPU1 is up
  1255. <6>[ 8300.633861] PM: early resume of devices complete after 0.559 msecs
  1256. <6>[ 8300.700323] wakeup wake lock: mmc_delayed_work
  1257. <4>[ 8300.701089] mmc1: queuing unknown CIS tuple 0x01 (3 bytes)
  1258. <4>[ 8300.702223] mmc1: queuing unknown CIS tuple 0x1a (5 bytes)
  1259. <4>[ 8300.702835] mmc1: queuing unknown CIS tuple 0x1b (8 bytes)
  1260. <4>[ 8300.702963] mmc1: queuing unknown CIS tuple 0x14 (0 bytes)
  1261. <4>[ 8300.703489] max8903b_resume: resume
  1262. <3>[ 8300.745967] pm_op(): platform_pm_resume+0x0/0x4c returns -22
  1263. <3>[ 8300.746002] PM: Device kgsl-2d1.1 failed to resume: error -22
  1264. <3>[ 8300.750843] msm_wm8958_setup_power: codec power setup
  1265. <3>[ 8300.750913] wm8994_ldo_power: Power up the WM8994 LDOs
  1266. <7>[ 8300.802839] lm8502_mod_brightness: set LED1 brightness (0) percent
  1267. <7>[ 8300.803646] lm8502_mod_brightness: set LED2 brightness (0) percent
  1268. <6>[ 8300.812091] PM: resume of devices complete after 177.838 msecs
  1269. <4>[ 8301.026806] Restarting tasks ...
  1270. <7>[ 8301.040723] lm8502_mod_brightness: set LED1 brightness (0) percent
  1271. <4>[ 8301.045214] done.
  1272. <6>[ 8301.047926] suspend: exit suspend, ret = 0 (2015-04-22 17:23:43.737362519 UTC)
  1273. <7>[ 8301.052520] lm8502_mod_brightness: set LED2 brightness (0) percent
  1274. <3>[ 8301.193040] wm8994-codec wm8994-codec: - MEOW wm8994_resume
  1275. <6>[ 8301.329985] PM: Syncing filesystems ... skipped for target platform ... done.
  1276. <4>[ 8301.338881] Freezing user space processes ... (elapsed 0.02 seconds) done.
  1277. <4>[ 8301.366610] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  1278. <4>[ 8301.386547] Suspending console(s) (use no_console_suspend to debug)
  1279. <3>[ 8301.402254] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
  1280. <3>[ 8301.402284] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
  1281. <3>[ 8301.402408] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
  1282. <3>[ 8301.427378] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
  1283. <3>[ 8301.427405] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
  1284. <3>[ 8301.427430] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
  1285. <7>[ 8301.427970] lm8502_mod_brightness: set LED2 brightness (0) percent
  1286. <7>[ 8301.428346] lm8502_mod_brightness: set LED1 brightness (0) percent
  1287. <7>[ 8301.439468] lm8502_mod_brightness: set LED1 brightness (0) percent
  1288. <7>[ 8301.440407] lm8502_mod_brightness: set LED2 brightness (0) percent
  1289. <3>[ 8301.444847] msm_wm8958_shutdown_power: codec power shutdown
  1290. <3>[ 8301.444880] wm8994_ldo_power: Power down the WM8994 LDOs
  1291. <3>[ 8301.444924] wm8994 4-001a: - MEOW wm8994_device_suspend
  1292. <4>[ 8301.453358] max8903b_suspend: suspend
  1293. <6>[ 8301.455880] PM: suspend of devices complete after 59.045 msecs
  1294. <6>[ 8301.457421] PM: late suspend of devices complete after 1.504 msecs
  1295. <4>[ 8301.457447] Disabling non-boot CPUs ...
  1296. <6>[ 8301.464837] cpufreq: cpu 1 is not active.
  1297. <6>[ 8301.474848] cpufreq: cpu 1 is not active.
  1298. <4>[ 8301.530348] gic_show_resume_irq: 48 triggered
  1299. <4>[ 8301.530348] gic_show_resume_irq: 52 triggered
  1300. <4>[ 8301.530348] msm_gpio_show_resume_irq: irq 293/gpio 37 triggered wake
  1301. <4>[ 8301.530533] Enabling non-boot CPUs ...
  1302. <4>[ 8301.623161] CPU1 is up
  1303. <6>[ 8301.623658] PM: early resume of devices complete after 0.463 msecs
  1304. <6>[ 8301.689710] wakeup wake lock: mmc_delayed_work
  1305. <4>[ 8301.690391] mmc1: queuing unknown CIS tuple 0x01 (3 bytes)
  1306. <4>[ 8301.691394] mmc1: queuing unknown CIS tuple 0x1a (5 bytes)
  1307. <4>[ 8301.691843] mmc1: queuing unknown CIS tuple 0x1b (8 bytes)
  1308. <4>[ 8301.691955] mmc1: queuing unknown CIS tuple 0x14 (0 bytes)
  1309. <4>[ 8301.692492] max8903b_resume: resume
  1310. <3>[ 8301.734746] pm_op(): platform_pm_resume+0x0/0x4c returns -22
  1311. <3>[ 8301.734778] PM: Device kgsl-2d1.1 failed to resume: error -22
  1312. <3>[ 8301.739286] msm_wm8958_setup_power: codec power setup
  1313. <3>[ 8301.739345] wm8994_ldo_power: Power up the WM8994 LDOs
  1314. <7>[ 8301.790327] lm8502_mod_brightness: set LED1 brightness (0) percent
  1315. <7>[ 8301.791116] lm8502_mod_brightness: set LED2 brightness (0) percent
  1316. <6>[ 8301.798126] PM: resume of devices complete after 174.081 msecs
  1317. <4>[ 8302.007784] Restarting tasks ...
  1318. <7>[ 8302.008392] lm8502_mod_brightness: set LED1 brightness (0) percent
  1319. <7>[ 8302.029420] lm8502_mod_brightness: set LED2 brightness (0) percent
  1320. <4>[ 8302.032204] done.
  1321. <6>[ 8302.036632] suspend: exit suspend, ret = 0 (2015-04-22 17:23:58.739781926 UTC)
  1322. <3>[ 8302.172997] wm8994-codec wm8994-codec: - MEOW wm8994_resume
  1323. <6>[ 8302.305855] PM: Syncing filesystems ... skipped for target platform ... done.
  1324. <4>[ 8302.312142] Freezing user space processes ... (elapsed 0.02 seconds) done.
  1325. <4>[ 8302.336818] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  1326. <4>[ 8302.356747] Suspending console(s) (use no_console_suspend to debug)
  1327. <3>[ 8302.385698] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
  1328. <3>[ 8302.385730] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
  1329. <3>[ 8302.385757] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
  1330. <3>[ 8302.410781] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
  1331. <3>[ 8302.410809] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
  1332. <3>[ 8302.410835] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
  1333. <7>[ 8302.411430] lm8502_mod_brightness: set LED2 brightness (0) percent
  1334. <7>[ 8302.411819] lm8502_mod_brightness: set LED1 brightness (0) percent
  1335. <7>[ 8302.425045] lm8502_mod_brightness: set LED1 brightness (0) percent
  1336. <7>[ 8302.426033] lm8502_mod_brightness: set LED2 brightness (0) percent
  1337. <3>[ 8302.430601] msm_wm8958_shutdown_power: codec power shutdown
  1338. <3>[ 8302.430638] wm8994_ldo_power: Power down the WM8994 LDOs
  1339. <3>[ 8302.430685] wm8994 4-001a: - MEOW wm8994_device_suspend
  1340. <4>[ 8302.440847] max8903b_suspend: suspend
  1341. <6>[ 8302.444293] PM: suspend of devices complete after 70.813 msecs
  1342. <6>[ 8302.446161] PM: late suspend of devices complete after 1.827 msecs
  1343. <4>[ 8302.446190] Disabling non-boot CPUs ...
  1344. <4>[ 8302.517173] gic_show_resume_irq: 48 triggered
  1345. <4>[ 8302.517173] gic_show_resume_irq: 52 triggered
  1346. <4>[ 8302.517173] msm_gpio_show_resume_irq: irq 293/gpio 37 triggered wake
  1347. <4>[ 8302.517321] Enabling non-boot CPUs ...
  1348. <3>[ 8302.602404] lsm303dlh_mag_sysfs 0-001e: read transfer error
  1349. <3>[ 8302.602435] lsm303dlh_mag_sysfs 0-001e: get_magnetometer_data failed
  1350. <4>[ 8302.613280] CPU1 is up
  1351. <6>[ 8302.613876] PM: early resume of devices complete after 0.559 msecs
  1352. <6>[ 8302.680355] wakeup wake lock: mmc_delayed_work
  1353. <4>[ 8302.681121] mmc1: queuing unknown CIS tuple 0x01 (3 bytes)
  1354. <4>[ 8302.682255] mmc1: queuing unknown CIS tuple 0x1a (5 bytes)
  1355. <4>[ 8302.682866] mmc1: queuing unknown CIS tuple 0x1b (8 bytes)
  1356. <4>[ 8302.682996] mmc1: queuing unknown CIS tuple 0x14 (0 bytes)
  1357. <4>[ 8302.683520] max8903b_resume: resume
  1358. <3>[ 8302.726001] pm_op(): platform_pm_resume+0x0/0x4c returns -22
  1359. <3>[ 8302.726035] PM: Device kgsl-2d1.1 failed to resume: error -22
  1360. <3>[ 8302.730873] msm_wm8958_setup_power: codec power setup
  1361. <3>[ 8302.730948] wm8994_ldo_power: Power up the WM8994 LDOs
  1362. <7>[ 8302.782840] lm8502_mod_brightness: set LED1 brightness (0) percent
  1363. <7>[ 8302.783646] lm8502_mod_brightness: set LED2 brightness (0) percent
  1364. <6>[ 8302.792132] PM: resume of devices complete after 177.861 msecs
  1365. <4>[ 8303.006738] Restarting tasks ...
  1366. <7>[ 8303.019572] lm8502_mod_brightness: set LED1 brightness (0) percent
  1367. <4>[ 8303.024386] done.
  1368. <6>[ 8303.026776] suspend: exit suspend, ret = 0 (2015-04-22 17:24:14.736216444 UTC)
  1369. <7>[ 8303.030863] lm8502_mod_brightness: set LED2 brightness (0) percent
  1370. <3>[ 8303.173051] wm8994-codec wm8994-codec: - MEOW wm8994_resume
  1371. <6>[ 8303.318765] PM: Syncing filesystems ... skipped for target platform ... done.
  1372. <4>[ 8303.324964] Freezing user space processes ... (elapsed 0.02 seconds) done.
  1373. <4>[ 8303.346635] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  1374. <4>[ 8303.366558] Suspending console(s) (use no_console_suspend to debug)
  1375. <3>[ 8303.386469] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
  1376. <3>[ 8303.386498] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
  1377. <3>[ 8303.386524] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
  1378. <3>[ 8303.411468] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
  1379. <3>[ 8303.411495] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
  1380. <3>[ 8303.411519] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
  1381. <7>[ 8303.412064] lm8502_mod_brightness: set LED2 brightness (0) percent
  1382. <7>[ 8303.412441] lm8502_mod_brightness: set LED1 brightness (0) percent
  1383. <7>[ 8303.423765] lm8502_mod_brightness: set LED1 brightness (0) percent
  1384. <7>[ 8303.424699] lm8502_mod_brightness: set LED2 brightness (0) percent
  1385. <3>[ 8303.429133] msm_wm8958_shutdown_power: codec power shutdown
  1386. <3>[ 8303.429166] wm8994_ldo_power: Power down the WM8994 LDOs
  1387. <3>[ 8303.429208] wm8994 4-001a: - MEOW wm8994_device_suspend
  1388. <4>[ 8303.437638] max8903b_suspend: suspend
  1389. <6>[ 8303.440171] PM: suspend of devices complete after 63.418 msecs
  1390. <6>[ 8303.441709] PM: late suspend of devices complete after 1.502 msecs
  1391. <4>[ 8303.441736] Disabling non-boot CPUs ...
  1392. <6>[ 8303.444873] cpufreq: cpu 1 is not active.
  1393. <4>[ 8303.560062] gic_show_resume_irq: 48 triggered
  1394. <4>[ 8303.560062] gic_show_resume_irq: 52 triggered
  1395. <4>[ 8303.560062] msm_gpio_show_resume_irq: irq 293/gpio 37 triggered wake
  1396. <4>[ 8303.560246] Enabling non-boot CPUs ...
  1397. <3>[ 8303.712354] lsm303dlh_mag_sysfs 0-001e: read transfer error
  1398. <3>[ 8303.712368] lsm303dlh_mag_sysfs 0-001e: get_magnetometer_data failed
  1399. <4>[ 8303.743141] CPU1 is up
  1400. <6>[ 8303.743638] PM: early resume of devices complete after 0.463 msecs
  1401. <6>[ 8303.809565] wakeup wake lock: mmc_delayed_work
  1402. <4>[ 8303.810242] mmc1: queuing unknown CIS tuple 0x01 (3 bytes)
  1403. <4>[ 8303.811244] mmc1: queuing unknown CIS tuple 0x1a (5 bytes)
  1404. <4>[ 8303.811691] mmc1: queuing unknown CIS tuple 0x1b (8 bytes)
  1405. <4>[ 8303.811803] mmc1: queuing unknown CIS tuple 0x14 (0 bytes)
  1406. <4>[ 8303.812256] max8903b_resume: resume
  1407. <3>[ 8303.854770] pm_op(): platform_pm_resume+0x0/0x4c returns -22
  1408. <3>[ 8303.854802] PM: Device kgsl-2d1.1 failed to resume: error -22
  1409. <3>[ 8303.859470] msm_wm8958_setup_power: codec power setup
  1410. <3>[ 8303.859534] wm8994_ldo_power: Power up the WM8994 LDOs
  1411. <7>[ 8303.910333] lm8502_mod_brightness: set LED1 brightness (0) percent
  1412. <7>[ 8303.911119] lm8502_mod_brightness: set LED2 brightness (0) percent
  1413. <6>[ 8303.918159] PM: resume of devices complete after 174.140 msecs
  1414. <4>[ 8304.135327] Restarting tasks ...
  1415. <7>[ 8304.135922] lm8502_mod_brightness: set LED1 brightness (0) percent
  1416. <4>[ 8304.153578] done.
  1417. <6>[ 8304.153742] suspend: exit suspend, ret = 0 (2015-04-22 17:24:30.736853927 UTC)
  1418. <7>[ 8304.157216] lm8502_mod_brightness: set LED2 brightness (0) percent
  1419. <3>[ 8304.303064] wm8994-codec wm8994-codec: - MEOW wm8994_resume
  1420. <6>[ 8304.438092] PM: Syncing filesystems ... skipped for target platform ... done.
  1421. <4>[ 8304.444381] Freezing user space processes ... (elapsed 0.03 seconds) done.
  1422. <4>[ 8304.476803] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  1423. <4>[ 8304.496741] Suspending console(s) (use no_console_suspend to debug)
  1424. <3>[ 8304.525602] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
  1425. <3>[ 8304.525634] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
  1426. <3>[ 8304.525661] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
  1427. <3>[ 8304.550784] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
  1428. <3>[ 8304.550813] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
  1429. <3>[ 8304.550839] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
  1430. <7>[ 8304.551430] lm8502_mod_brightness: set LED2 brightness (0) percent
  1431. <7>[ 8304.551820] lm8502_mod_brightness: set LED1 brightness (0) percent
  1432. <7>[ 8304.565171] lm8502_mod_brightness: set LED1 brightness (0) percent
  1433. <7>[ 8304.566150] lm8502_mod_brightness: set LED2 brightness (0) percent
  1434. <3>[ 8304.570694] msm_wm8958_shutdown_power: codec power shutdown
  1435. <3>[ 8304.570731] wm8994_ldo_power: Power down the WM8994 LDOs
  1436. <3>[ 8304.570778] wm8994 4-001a: - MEOW wm8994_device_suspend
  1437. <4>[ 8304.580934] max8903b_suspend: suspend
  1438. <6>[ 8304.584384] PM: suspend of devices complete after 70.954 msecs
  1439. <6>[ 8304.586251] PM: late suspend of devices complete after 1.827 msecs
  1440. <4>[ 8304.586280] Disabling non-boot CPUs ...
  1441. <4>[ 8304.658125] gic_show_resume_irq: 48 triggered
  1442. <4>[ 8304.658125] gic_show_resume_irq: 52 triggered
  1443. <4>[ 8304.658125] msm_gpio_show_resume_irq: irq 293/gpio 37 triggered wake
  1444. <4>[ 8304.658272] Enabling non-boot CPUs ...
  1445. <4>[ 8304.753296] CPU1 is up
  1446. <6>[ 8304.753892] PM: early resume of devices complete after 0.558 msecs
  1447. <6>[ 8304.820371] wakeup wake lock: mmc_delayed_work
  1448. <4>[ 8304.821137] mmc1: queuing unknown CIS tuple 0x01 (3 bytes)
  1449. <4>[ 8304.822273] mmc1: queuing unknown CIS tuple 0x1a (5 bytes)
  1450. <3>[ 8304.822443] lsm303dlh_mag_sysfs 0-001e: read transfer error
  1451. <3>[ 8304.822473] lsm303dlh_mag_sysfs 0-001e: get_magnetometer_data failed
  1452. <4>[ 8304.822892] mmc1: queuing unknown CIS tuple 0x1b (8 bytes)
  1453. <4>[ 8304.823022] mmc1: queuing unknown CIS tuple 0x14 (0 bytes)
  1454. <4>[ 8304.823546] max8903b_resume: resume
  1455. <3>[ 8304.866016] pm_op(): platform_pm_resume+0x0/0x4c returns -22
  1456. <3>[ 8304.866050] PM: Device kgsl-2d1.1 failed to resume: error -22
  1457. <3>[ 8304.871079] msm_wm8958_setup_power: codec power setup
  1458. <3>[ 8304.871148] wm8994_ldo_power: Power up the WM8994 LDOs
  1459. <7>[ 8304.922829] lm8502_mod_brightness: set LED1 brightness (0) percent
  1460. <7>[ 8304.923652] lm8502_mod_brightness: set LED2 brightness (0) percent
  1461. <6>[ 8304.932089] PM: resume of devices complete after 177.804 msecs
  1462. <4>[ 8305.146543] Restarting tasks ...
  1463. <7>[ 8305.160433] lm8502_mod_brightness: set LED1 brightness (0) percent
  1464. <7>[ 8305.168052] lm8502_mod_brightness: set LED2 brightness (0) percent
  1465. <4>[ 8305.174862] done.
  1466. <3>[ 8305.313062] wm8994-codec wm8994-codec: - MEOW wm8994_resume
  1467. <6>[ 8305.417706] suspend: exit suspend, ret = 0 (2015-04-22 17:24:46.987144445 UTC)
  1468. <6>[ 8305.459856] PM: Syncing filesystems ... skipped for target platform ... done.
  1469. <4>[ 8305.466058] Freezing user space processes ... (elapsed 0.01 seconds) done.
  1470. <4>[ 8305.486648] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
  1471. <4>[ 8305.506572] Suspending console(s) (use no_console_suspend to debug)
  1472. <3>[ 8305.522237] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
  1473. <3>[ 8305.522266] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
  1474. <3>[ 8305.522292] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
  1475. <3>[ 8305.547337] wm8994-codec wm8994-codec: AIF1_CLOCKING_1 value 0x10
  1476. <3>[ 8305.547364] wm8994-codec wm8994-codec: AIF2_CLOCKING_1 value 0x0
  1477. <3>[ 8305.547389] wm8994-codec wm8994-codec: - MEOW wm8994_suspend
  1478. <7>[ 8305.547931] lm8502_mod_brightness: set LED2 brightness (0) percent
  1479. <7>[ 8305.548307] lm8502_mod_brightness: set LED1 brightness (0) percent
  1480. <7>[ 8305.559334] lm8502_mod_brightness: set LED1 brightness (0) percent
  1481. <7>[ 8305.560280] lm8502_mod_brightness: set LED2 brightness (0) percent
  1482. <3>[ 8305.564738] msm_wm8958_shutdown_power: codec power shutdown
  1483. <3>[ 8305.564771] wm8994_ldo_power: Power down the WM8994 LDOs
  1484. <3>[ 8305.564815] wm8994 4-001a: - MEOW wm8994_device_suspend
  1485. <4>[ 8305.573342] max8903b_suspend: suspend
  1486. <6>[ 8305.575862] PM: suspend of devices complete after 59.066 msecs
  1487. <6>[ 8305.577399] PM: late suspend of devices complete after 1.501 msecs
  1488. <4>[ 8305.577425] Disabling non-boot CPUs ...
  1489. <6>[ 8305.584869] cpufreq: cpu 1 is not active.
  1490. <6>[ 8305.594876] cpufreq: cpu 1 is not active.
  1491. <4>[ 8305.650204] gic_show_resume_irq: 48 triggered
  1492. <4>[ 8305.650204] gic_show_resume_irq: 52 triggered
  1493. <4>[ 8305.650204] msm_gpio_show_resume_irq: irq 296/gpio 40 triggered wake
  1494. <4>[ 8305.650394] Enabling non-boot CPUs ...
  1495. <3>[ 8305.732406] lsm303dlh_mag_sysfs 0-001e: read transfer error
  1496. <3>[ 8305.732436] lsm303dlh_mag_sysfs 0-001e: get_magnetometer_data failed
  1497. <4>[ 8305.743173] CPU1 is up
  1498. <6>[ 8305.743669] PM: early resume of devices complete after 0.462 msecs
  1499. <6>[ 8305.809716] wakeup wake lock: mmc_delayed_work
  1500. <4>[ 8305.810393] mmc1: queuing unknown CIS tuple 0x01 (3 bytes)
  1501. <4>[ 8305.811395] mmc1: queuing unknown CIS tuple 0x1a (5 bytes)
  1502. <4>[ 8305.811843] mmc1: queuing unknown CIS tuple 0x1b (8 bytes)
  1503. <4>[ 8305.811955] mmc1: queuing unknown CIS tuple 0x14 (0 bytes)
  1504. <4>[ 8305.812505] max8903b_resume: resume
  1505. <3>[ 8305.854785] pm_op(): platform_pm_resume+0x0/0x4c returns -22
  1506. <3>[ 8305.854817] PM: Device kgsl-2d1.1 failed to resume: error -22
  1507. <4>[ 8305.855826] gpio_keys: forcing GPIO 40 to state 1
  1508. <6>[ 8305.855850] gpio-keys: core navi button pressed
  1509. <3>[ 8305.859626] msm_wm8958_setup_power: codec power setup
  1510. <3>[ 8305.859690] wm8994_ldo_power: Power up the WM8994 LDOs
  1511. <6>[ 8305.872372] gpio-keys: core navi button released
  1512. <7>[ 8305.910698] lm8502_mod_brightness: set LED1 brightness (0) percent
  1513. <7>[ 8305.911496] lm8502_mod_brightness: set LED2 brightness (0) percent
  1514. <6>[ 8305.918437] PM: resume of devices complete after 174.428 msecs
  1515. <7>[ 8306.152476] lm8502_mod_brightness: set LED1 brightness (0) percent
  1516. <7>[ 8306.158648] lm8502_mod_brightness: set LED2 brightness (0) percent
  1517. <4>[ 8306.164847] Restarting tasks ... done.
  1518. <6>[ 8306.177220] suspend: exit suspend, ret = 0 (2015-04-22 17:24:53.760063556 UTC)
  1519. <6>[ 8306.185122] request_suspend_state: wakeup (3->0) at 8306172798206 (2015-04-22 17:24:53.767958519 UTC)
  1520. <6>[ 8306.185748] lsm303dlh_acc_sysfs: hw init start
  1521. <6>[ 8306.201616] lsm303dlh_acc_sysfs: hw init done
  1522. <3>[ 8306.218926] lcdc_lg_panel_power: l10 ENABLE
  1523. <3>[ 8306.333063] wm8994-codec wm8994-codec: - MEOW wm8994_resume
  1524. <6>[ 8307.664692] msm_device_put:device speaker_stereo_rx set 0
  1525. <6>[ 8307.664822] msm_device_put:device speaker_stereo_rx set 1
  1526. <3>[ 8307.674298] msm_device_put:device freq =48000
  1527. <6>[ 8307.693666] aif1 codec rates are already configured, just return
  1528. <6>[ 8310.997166] msm_device_put:device speaker_stereo_rx set 0
  1529. <6>[ 8313.891522] msm_device_put:device speaker_stereo_rx set 0
  1530. <6>[ 8313.891573] msm_device_put:device speaker_stereo_rx set 1
  1531. <3>[ 8313.900995] msm_device_put:device freq =48000
  1532. <6>[ 8313.913900] aif1 codec rates are already configured, just return
  1533. <6>[ 8322.315222] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
  1534. <6>[ 8353.122619] cfg80211: Calling CRDA to update world regulatory domain
  1535. <6>[ 8547.601884] cfg80211: Calling CRDA for country: US
  1536. <3>[ 8712.682648] qtaguid: iface_stat: stat_update() lo not found
  1537. <3>[ 8712.682713] qtaguid: iface_stat: stat_update() lo not found
  1538. <3>[ 8715.792713] qtaguid: iface_stat: stat_update() lo not found
  1539. <3>[ 8715.792801] qtaguid: iface_stat: stat_update() lo not found
  1540. <7>[ 8720.012387] wlan0: no IPv6 routers present
  1541. <3>[ 8720.152691] qtaguid: iface_stat: stat_update() lo not found
  1542. <3>[ 8720.152767] qtaguid: iface_stat: stat_update() lo not found
  1543. <3>[ 8720.162857] qtaguid: iface_stat: stat_update() lo not found
  1544. <6>[ 8720.334424] cfg80211: Calling CRDA for country: US
  1545. <6>[ 8916.927282] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
  1546. <6>[ 8947.617842] cfg80211: Calling CRDA to update world regulatory domain
  1547. <6>[ 9016.234877] cfg80211: Calling CRDA to update world regulatory domain
  1548. <3>[ 9110.732560] qtaguid: iface_stat: stat_update() lo not found
  1549. <3>[ 9110.732605] qtaguid: iface_stat: stat_update() lo not found
  1550. <7>[ 9114.652364] wlan0: no IPv6 routers present
  1551. <3>[ 9115.742621] qtaguid: iface_stat: stat_update() lo not found
  1552. <3>[ 9115.742655] qtaguid: iface_stat: stat_update() lo not found
  1553. <3>[ 9120.705224] qtaguid: iface_stat: stat_update() lo not found
  1554. <3>[ 9120.705293] qtaguid: iface_stat: stat_update() lo not found
  1555. <3>[ 9120.705344] qtaguid: iface_stat: stat_update() lo not found
  1556. <3>[ 9125.704562] qtaguid: iface_stat: stat_update() lo not found
  1557. <3>[ 9125.704607] qtaguid: iface_stat: stat_update() lo not found
  1558. <3>[ 9125.714702] qtaguid: iface_stat: stat_update() lo not found
  1559. <3>[ 9130.713222] qtaguid: iface_stat: stat_update() lo not found
  1560. <3>[ 9130.713258] qtaguid: iface_stat: stat_update() lo not found
  1561. <3>[ 9130.713280] qtaguid: iface_stat: stat_update() lo not found
  1562. <3>[ 9135.715246] qtaguid: iface_stat: stat_update() lo not found
  1563. <3>[ 9135.715340] qtaguid: iface_stat: stat_update() lo not found
  1564. <3>[ 9135.725483] qtaguid: iface_stat: stat_update() lo not found
  1565. <3>[ 9140.725079] qtaguid: iface_stat: stat_update() lo not found
  1566. <3>[ 9140.725126] qtaguid: iface_stat: stat_update() lo not found
  1567. <3>[ 9140.735212] qtaguid: iface_stat: stat_update() lo not found
  1568. <3>[ 9144.625239] qtaguid: iface_stat: stat_update() lo not found
  1569. <3>[ 9144.625330] qtaguid: iface_stat: stat_update() lo not found
  1570. <3>[ 9144.635424] qtaguid: iface_stat: stat_update() lo not found
  1571. <3>[ 9149.625181] qtaguid: iface_stat: stat_update() lo not found
  1572. <3>[ 9149.625272] qtaguid: iface_stat: stat_update() lo not found
  1573. <3>[ 9154.625044] qtaguid: iface_stat: stat_update() lo not found
  1574. <3>[ 9154.625076] qtaguid: iface_stat: stat_update() lo not found
  1575. <3>[ 9159.635065] qtaguid: iface_stat: stat_update() lo not found
  1576. <3>[ 9159.635112] qtaguid: iface_stat: stat_update() lo not found
  1577. <3>[ 9159.645200] qtaguid: iface_stat: stat_update() lo not found
  1578. <3>[ 9164.425229] qtaguid: iface_stat: stat_update() lo not found
  1579. <3>[ 9164.425321] qtaguid: iface_stat: stat_update() lo not found
  1580. <3>[ 9164.435435] qtaguid: iface_stat: stat_update() lo not found
  1581. <3>[ 9169.433224] qtaguid: iface_stat: stat_update() lo not found
  1582. <3>[ 9169.433270] qtaguid: iface_stat: stat_update() lo not found
  1583. <3>[ 9169.443369] qtaguid: iface_stat: stat_update() lo not found
  1584. <3>[ 9174.435319] qtaguid: iface_stat: stat_update() lo not found
  1585. <3>[ 9174.435409] qtaguid: iface_stat: stat_update() lo not found
  1586. <3>[ 9174.445528] qtaguid: iface_stat: stat_update() lo not found
  1587. <3>[ 9179.435119] qtaguid: iface_stat: stat_update() lo not found
  1588. <3>[ 9179.435162] qtaguid: iface_stat: stat_update() lo not found
  1589. <3>[ 9179.435194] qtaguid: iface_stat: stat_update() lo not found
  1590. <3>[ 9184.445274] qtaguid: iface_stat: stat_update() lo not found
  1591. <3>[ 9184.445367] qtaguid: iface_stat: stat_update() lo not found
  1592. <3>[ 9184.455511] qtaguid: iface_stat: stat_update() lo not found
  1593. <3>[ 9189.443112] qtaguid: iface_stat: stat_update() lo not found
  1594. <3>[ 9189.443159] qtaguid: iface_stat: stat_update() lo not found
  1595. <3>[ 9189.453275] qtaguid: iface_stat: stat_update() lo not found
  1596. <3>[ 9194.445045] qtaguid: iface_stat: stat_update() lo not found
  1597. <3>[ 9194.445077] qtaguid: iface_stat: stat_update() lo not found
  1598. <3>[ 9194.445097] qtaguid: iface_stat: stat_update() lo not found
  1599. <3>[ 9199.455011] qtaguid: iface_stat: stat_update() lo not found
  1600. <3>[ 9216.165049] qtaguid: iface_stat: stat_update() lo not found
  1601. <3>[ 9216.165094] qtaguid: iface_stat: stat_update() lo not found
  1602. <3>[ 9221.175074] qtaguid: iface_stat: stat_update() lo not found
  1603. <3>[ 9221.175121] qtaguid: iface_stat: stat_update() lo not found
  1604. <3>[ 9226.175039] qtaguid: iface_stat: stat_update() lo not found
  1605. <3>[ 9226.175086] qtaguid: iface_stat: stat_update() lo not found
  1606. <3>[ 9231.185061] qtaguid: iface_stat: stat_update() lo not found
  1607. <3>[ 9231.185108] qtaguid: iface_stat: stat_update() lo not found
  1608. <3>[ 9236.185042] qtaguid: iface_stat: stat_update() lo not found
  1609. <3>[ 9236.185088] qtaguid: iface_stat: stat_update() lo not found
  1610. <6>[ 9236.499872] cfg80211: Calling CRDA to update world regulatory domain
  1611. <6>[12008.116219] msm_otg_resume: usb exited from low power mode
  1612. <6>[12008.351676] gadget_event: source=detected mA=0
  1613. <4>[12009.419682] UDC-CHG (2-1-1-2): usb_multi_chg_detect (540) : 10W Adaptor(2000mA)!
  1614. <6>[12009.463365] a6_update_connected_ps: ac=1 usb=0 dock=0
  1615. <6>[12009.463402] max8903b_current_setup: CURRENT_750(4), 900(5), 1000(6), 1400(7), 2000MA(9): 9
  1616. <6>[12009.475946] gadget_event: source=charger mA=2000
  1617. <6>[12009.713236] msm_otg_suspend: usb in low power mode
  1618. <6>[12583.389770] a6_update_connected_ps: ac=1 usb=0 dock=0
  1619. <6>[12583.996346] msm_otg_resume: usb exited from low power mode
  1620. <6>[12584.033746] a6_update_connected_ps: ac=0 usb=0 dock=0
  1621. <6>[12584.033759] max8903b_current_setup: ### CHARGE_DISABLE
  1622. <6>[12584.033772] gadget_event: source=none mA=0
  1623. <6>[12584.263215] msm_otg_suspend: usb in low power mode
  1624. <6>[12621.945049] msm_otg_resume: usb exited from low power mode
  1625. <6>[12622.172795] gadget_event: source=detected mA=0
  1626. <4>[12623.242440] UDC-CHG (2-1-1-2): usb_multi_chg_detect (540) : 10W Adaptor(2000mA)!
  1627. <6>[12623.283803] a6_update_connected_ps: ac=1 usb=0 dock=0
  1628. <6>[12623.283820] max8903b_current_setup: CURRENT_750(4), 900(5), 1000(6), 1400(7), 2000MA(9): 9
  1629. <6>[12623.283844] gadget_event: source=charger mA=2000
  1630. <6>[12623.513297] msm_otg_suspend: usb in low power mode
  1631. <6>[13010.469842] a6_update_connected_ps: ac=1 usb=0 dock=0
  1632. <6>[13011.039891] msm_otg_resume: usb exited from low power mode
  1633. <6>[13011.083720] a6_update_connected_ps: ac=0 usb=0 dock=0
  1634. <6>[13011.083748] max8903b_current_setup: ### CHARGE_DISABLE
  1635. <6>[13011.093179] gadget_event: source=none mA=0
  1636. <6>[13011.323300] msm_otg_suspend: usb in low power mode
  1637. <6>[13023.483365] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
  1638. <6>[13028.384685] msm_otg_resume: usb exited from low power mode
  1639. <6>[13028.612670] gadget_event: source=detected mA=0
  1640. <4>[13029.688973] UDC-CHG (2-1-1-2): usb_multi_chg_detect (540) : 10W Adaptor(2000mA)!
  1641. <6>[13029.730586] a6_update_connected_ps: ac=1 usb=0 dock=0
  1642. <6>[13029.730617] max8903b_current_setup: CURRENT_750(4), 900(5), 1000(6), 1400(7), 2000MA(9): 9
  1643. <6>[13029.744946] gadget_event: source=charger mA=2000
  1644. <6>[13029.983208] msm_otg_suspend: usb in low power mode
  1645. <6>[13038.051200] cfg80211: Calling CRDA to update world regulatory domain
  1646. <6>[13169.132293] cfg80211: Calling CRDA to update world regulatory domain
  1647. <6>[13201.271689] cfg80211: Calling CRDA to update world regulatory domain
  1648. <6>[13310.044898] cfg80211: Calling CRDA to update world regulatory domain
  1649. <6>[17115.037478] cfg80211: Calling CRDA to update world regulatory domain
  1650. <6>[17194.927833] cfg80211: Calling CRDA to update world regulatory domain
  1651. <6>[17255.352928] cfg80211: Calling CRDA to update world regulatory domain
  1652. <6>[17419.392135] cfg80211: Calling CRDA to update world regulatory domain
  1653. <3>[17579.995073] qtaguid: iface_stat: stat_update() lo not found
  1654. <3>[17579.995119] qtaguid: iface_stat: stat_update() lo not found
  1655. <7>[17584.362357] wlan0: no IPv6 routers present
  1656. <3>[17585.005206] qtaguid: iface_stat: stat_update() lo not found
  1657. <3>[17585.005289] qtaguid: iface_stat: stat_update() lo not found
  1658. <3>[17589.962649] qtaguid: iface_stat: stat_update() lo not found
  1659. <3>[17589.962749] qtaguid: iface_stat: stat_update() lo not found
  1660. <3>[17589.972948] qtaguid: iface_stat: stat_update() lo not found
  1661. <3>[17594.962599] qtaguid: iface_stat: stat_update() lo not found
  1662. <3>[17594.962633] qtaguid: iface_stat: stat_update() lo not found
  1663. <3>[17594.962653] qtaguid: iface_stat: stat_update() lo not found
  1664. <3>[17599.972884] qtaguid: iface_stat: stat_update() lo not found
  1665. <3>[17599.972927] qtaguid: iface_stat: stat_update() lo not found
  1666. <3>[17599.972947] qtaguid: iface_stat: stat_update() lo not found
  1667. <6>[17602.642709] cfg80211: Calling CRDA to update world regulatory domain
  1668. <6>[17683.060607] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
  1669. <6>[17694.291386] cfg80211: Calling CRDA to update world regulatory domain
  1670. <6>[17809.132487] cfg80211: Calling CRDA to update world regulatory domain
  1671. <3>[17899.255087] qtaguid: iface_stat: stat_update() lo not found
  1672. <3>[17899.255134] qtaguid: iface_stat: stat_update() lo not found
  1673. <7>[17903.231670] wlan0: no IPv6 routers present
  1674. <3>[17904.265254] qtaguid: iface_stat: stat_update() lo not found
  1675. <3>[17904.265340] qtaguid: iface_stat: stat_update() lo not found
  1676. <3>[17909.162550] qtaguid: iface_stat: stat_update() lo not found
  1677. <3>[17909.162582] qtaguid: iface_stat: stat_update() lo not found
  1678. <3>[17909.162601] qtaguid: iface_stat: stat_update() lo not found
  1679. <3>[17914.172540] qtaguid: iface_stat: stat_update() lo not found
  1680. <3>[17914.172585] qtaguid: iface_stat: stat_update() lo not found
  1681. <3>[17914.182814] qtaguid: iface_stat: stat_update() lo not found
  1682. <3>[17919.173581] qtaguid: iface_stat: stat_update() lo not found
  1683. <3>[17919.173697] qtaguid: iface_stat: stat_update() lo not found
  1684. <3>[17919.183854] qtaguid: iface_stat: stat_update() lo not found
  1685. <3>[17924.182552] qtaguid: iface_stat: stat_update() lo not found
  1686. <3>[17924.182599] qtaguid: iface_stat: stat_update() lo not found
  1687. <3>[17924.192749] qtaguid: iface_stat: stat_update() lo not found
  1688. <3>[17929.182672] qtaguid: iface_stat: stat_update() lo not found
  1689. <3>[17929.182709] qtaguid: iface_stat: stat_update() lo not found
  1690. <3>[17929.182729] qtaguid: iface_stat: stat_update() lo not found
  1691. <3>[17934.192626] qtaguid: iface_stat: stat_update() lo not found
  1692. <3>[17934.192671] qtaguid: iface_stat: stat_update() lo not found
  1693. <3>[17934.202752] qtaguid: iface_stat: stat_update() lo not found
  1694. <3>[17939.202591] qtaguid: iface_stat: stat_update() lo not found
  1695. <3>[17939.202624] qtaguid: iface_stat: stat_update() lo not found
  1696. <3>[17939.202643] qtaguid: iface_stat: stat_update() lo not found
  1697. <3>[17944.192579] qtaguid: iface_stat: stat_update() lo not found
  1698. <3>[17944.192626] qtaguid: iface_stat: stat_update() lo not found
  1699. <3>[17944.202757] qtaguid: iface_stat: stat_update() lo not found
  1700. <3>[17951.442533] qtaguid: iface_stat: stat_update() lo not found
  1701. <3>[17951.442578] qtaguid: iface_stat: stat_update() lo not found
  1702. <3>[17951.452707] qtaguid: iface_stat: stat_update() lo not found
  1703. <3>[17956.442576] qtaguid: iface_stat: stat_update() lo not found
  1704. <3>[17956.442625] qtaguid: iface_stat: stat_update() lo not found
  1705. <3>[17961.452514] qtaguid: iface_stat: stat_update() lo not found
  1706. <3>[17961.452559] qtaguid: iface_stat: stat_update() lo not found
  1707. <3>[17966.452603] qtaguid: iface_stat: stat_update() lo not found
  1708. <3>[17966.452654] qtaguid: iface_stat: stat_update() lo not found
  1709. <3>[17969.482567] qtaguid: iface_stat: stat_update() lo not found
  1710. <3>[17969.482614] qtaguid: iface_stat: stat_update() lo not found
  1711. <3>[17973.565041] qtaguid: iface_stat: stat_update() lo not found
  1712. <3>[17973.565087] qtaguid: iface_stat: stat_update() lo not found
  1713. <3>[17978.575282] qtaguid: iface_stat: stat_update() lo not found
  1714. <3>[17978.575367] qtaguid: iface_stat: stat_update() lo not found
  1715. <3>[17983.575057] qtaguid: iface_stat: stat_update() lo not found
  1716. <3>[17983.575102] qtaguid: iface_stat: stat_update() lo not found
  1717. <3>[17988.585223] qtaguid: iface_stat: stat_update() lo not found
  1718. <3>[17988.585315] qtaguid: iface_stat: stat_update() lo not found
  1719. <3>[17994.502531] qtaguid: iface_stat: stat_update() lo not found
  1720. <6>[18006.708528] cfg80211: Calling CRDA to update world regulatory domain
  1721. <6>[18214.053374] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
  1722. <3>[18221.042762] qtaguid: iface_stat: stat_update() lo not found
  1723. <3>[18221.042816] qtaguid: iface_stat: stat_update() lo not found
  1724. <7>[18225.524859] wlan0: no IPv6 routers present
  1725. <3>[18226.042629] qtaguid: iface_stat: stat_update() lo not found
  1726. <3>[18226.042678] qtaguid: iface_stat: stat_update() lo not found
  1727. <3>[18231.052561] qtaguid: iface_stat: stat_update() lo not found
  1728. <3>[18231.052607] qtaguid: iface_stat: stat_update() lo not found
  1729. <3>[18231.062724] qtaguid: iface_stat: stat_update() lo not found
  1730. <6>[18235.982892] cfg80211: Calling CRDA to update world regulatory domain
  1731. <3>[18236.052763] qtaguid: iface_stat: stat_update() lo not found
  1732. <3>[18236.052823] qtaguid: iface_stat: stat_update() lo not found
  1733. <3>[18236.063000] qtaguid: iface_stat: stat_update() lo not found
  1734. <6>[18305.527223] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
  1735. <6>[18321.430181] cfg80211: Calling CRDA to update world regulatory domain
  1736. <6>[18368.014845] cfg80211: Calling CRDA to update world regulatory domain
  1737. <3>[18529.272672] qtaguid: iface_stat: stat_update() lo not found
  1738. <3>[18529.272741] qtaguid: iface_stat: stat_update() lo not found
  1739. <7>[18533.432355] wlan0: no IPv6 routers present
  1740. <3>[18534.268586] qtaguid: iface_stat: stat_update() lo not found
  1741. <3>[18534.268643] qtaguid: iface_stat: stat_update() lo not found
  1742. <3>[18539.205088] qtaguid: iface_stat: stat_update() lo not found
  1743. <3>[18539.205138] qtaguid: iface_stat: stat_update() lo not found
  1744. <3>[18539.215227] qtaguid: iface_stat: stat_update() lo not found
  1745. <3>[18544.205031] qtaguid: iface_stat: stat_update() lo not found
  1746. <3>[18544.205076] qtaguid: iface_stat: stat_update() lo not found
  1747. <3>[18544.215163] qtaguid: iface_stat: stat_update() lo not found
  1748. <3>[18549.215280] qtaguid: iface_stat: stat_update() lo not found
  1749. <3>[18549.215351] qtaguid: iface_stat: stat_update() lo not found
  1750. <3>[18549.225516] qtaguid: iface_stat: stat_update() lo not found
  1751. <3>[18554.215074] qtaguid: iface_stat: stat_update() lo not found
  1752. <3>[18554.215121] qtaguid: iface_stat: stat_update() lo not found
  1753. <3>[18554.225219] qtaguid: iface_stat: stat_update() lo not found
  1754. <3>[18559.225234] qtaguid: iface_stat: stat_update() lo not found
  1755. <3>[18559.225320] qtaguid: iface_stat: stat_update() lo not found
  1756. <3>[18559.235443] qtaguid: iface_stat: stat_update() lo not found
  1757. <3>[18564.225249] qtaguid: iface_stat: stat_update() lo not found
  1758. <3>[18564.225318] qtaguid: iface_stat: stat_update() lo not found
  1759. <3>[18564.225370] qtaguid: iface_stat: stat_update() lo not found
  1760. <3>[18569.222779] qtaguid: iface_stat: stat_update() lo not found
  1761. <3>[18574.235202] qtaguid: iface_stat: stat_update() lo not found
  1762. <3>[18574.235294] qtaguid: iface_stat: stat_update() lo not found
  1763. <6>[18577.456491] cfg80211: Calling CRDA to update world regulatory domain
  1764. <6>[18593.155307] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
  1765. <6>[18691.612450] cfg80211: Calling CRDA to update world regulatory domain
  1766. <3>[18779.415124] qtaguid: iface_stat: stat_update() lo not found
  1767. <3>[18779.415175] qtaguid: iface_stat: stat_update() lo not found
  1768. <7>[18783.474923] wlan0: no IPv6 routers present
  1769. <3>[18784.415124] qtaguid: iface_stat: stat_update() lo not found
  1770. <3>[18784.415187] qtaguid: iface_stat: stat_update() lo not found
  1771. <3>[18789.372610] qtaguid: iface_stat: stat_update() lo not found
  1772. <3>[18789.372659] qtaguid: iface_stat: stat_update() lo not found
  1773. <3>[18789.382820] qtaguid: iface_stat: stat_update() lo not found
  1774. <3>[18794.372528] qtaguid: iface_stat: stat_update() lo not found
  1775. <3>[18794.372573] qtaguid: iface_stat: stat_update() lo not found
  1776. <3>[18794.382817] qtaguid: iface_stat: stat_update() lo not found
  1777. <3>[18799.382598] qtaguid: iface_stat: stat_update() lo not found
  1778. <3>[18799.382632] qtaguid: iface_stat: stat_update() lo not found
  1779. <3>[18799.382651] qtaguid: iface_stat: stat_update() lo not found
  1780. <3>[18804.382642] qtaguid: iface_stat: stat_update() lo not found
  1781. <3>[18804.382690] qtaguid: iface_stat: stat_update() lo not found
  1782. <3>[18804.392809] qtaguid: iface_stat: stat_update() lo not found
  1783. <6>[18808.601073] cfg80211: Calling CRDA to update world regulatory domain
  1784. <6>[18857.802270] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
  1785. <3>[18864.875155] qtaguid: iface_stat: stat_update() lo not found
  1786. <3>[18864.875191] qtaguid: iface_stat: stat_update() lo not found
  1787. <7>[18869.712381] wlan0: no IPv6 routers present
  1788. <3>[18869.875076] qtaguid: iface_stat: stat_update() lo not found
  1789. <3>[18869.875122] qtaguid: iface_stat: stat_update() lo not found
  1790. <3>[18874.785051] qtaguid: iface_stat: stat_update() lo not found
  1791. <3>[18874.785098] qtaguid: iface_stat: stat_update() lo not found
  1792. <3>[18874.795194] qtaguid: iface_stat: stat_update() lo not found
  1793. <3>[18879.785050] qtaguid: iface_stat: stat_update() lo not found
  1794. <3>[18879.785096] qtaguid: iface_stat: stat_update() lo not found
  1795. <3>[18879.795187] qtaguid: iface_stat: stat_update() lo not found
  1796. <3>[18884.795210] qtaguid: iface_stat: stat_update() lo not found
  1797. <3>[18884.795301] qtaguid: iface_stat: stat_update() lo not found
  1798. <3>[18884.805417] qtaguid: iface_stat: stat_update() lo not found
  1799. <3>[18889.795068] qtaguid: iface_stat: stat_update() lo not found
  1800. <3>[18889.795115] qtaguid: iface_stat: stat_update() lo not found
  1801. <3>[18889.805204] qtaguid: iface_stat: stat_update() lo not found
  1802. <3>[18894.805128] qtaguid: iface_stat: stat_update() lo not found
  1803. <3>[18894.805174] qtaguid: iface_stat: stat_update() lo not found
  1804. <3>[18894.815263] qtaguid: iface_stat: stat_update() lo not found
  1805. <3>[18899.802732] qtaguid: iface_stat: stat_update() lo not found
  1806. <3>[18899.802778] qtaguid: iface_stat: stat_update() lo not found
  1807. <3>[18899.812880] qtaguid: iface_stat: stat_update() lo not found
  1808. <3>[18904.805219] qtaguid: iface_stat: stat_update() lo not found
  1809. <3>[18904.805310] qtaguid: iface_stat: stat_update() lo not found
  1810. <3>[18904.815416] qtaguid: iface_stat: stat_update() lo not found
  1811. <3>[18909.815075] qtaguid: iface_stat: stat_update() lo not found
  1812. <3>[18909.815121] qtaguid: iface_stat: stat_update() lo not found
  1813. <3>[18909.825263] qtaguid: iface_stat: stat_update() lo not found
  1814. <3>[18916.442595] qtaguid: iface_stat: stat_update() lo not found
  1815. <3>[18916.442645] qtaguid: iface_stat: stat_update() lo not found
  1816. <3>[18916.452806] qtaguid: iface_stat: stat_update() lo not found
  1817. <3>[18921.442574] qtaguid: iface_stat: stat_update() lo not found
  1818. <3>[18921.442621] qtaguid: iface_stat: stat_update() lo not found
  1819. <3>[18926.452518] qtaguid: iface_stat: stat_update() lo not found
  1820. <3>[18926.452562] qtaguid: iface_stat: stat_update() lo not found
  1821. <3>[18931.452581] qtaguid: iface_stat: stat_update() lo not found
  1822. <3>[18931.452614] qtaguid: iface_stat: stat_update() lo not found
  1823. <3>[18936.462520] qtaguid: iface_stat: stat_update() lo not found
  1824. <3>[18936.462565] qtaguid: iface_stat: stat_update() lo not found
  1825. <3>[18944.275024] qtaguid: iface_stat: stat_update() lo not found
  1826. <3>[18949.275057] qtaguid: iface_stat: stat_update() lo not found
  1827. <3>[18954.285109] qtaguid: iface_stat: stat_update() lo not found
  1828. <3>[18987.955051] qtaguid: iface_stat: stat_update() lo not found
  1829. <6>[18992.040962] cfg80211: Calling CRDA to update world regulatory domain
  1830. <6>[19024.556950] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
  1831. <6>[19055.252614] cfg80211: Calling CRDA to update world regulatory domain
  1832. <6>[19275.346843] cfg80211: Calling CRDA to update world regulatory domain
  1833. <6>[19319.133469] cfg80211: Calling CRDA to update world regulatory domain
  1834. <6>[19427.862548] cfg80211: Calling CRDA to update world regulatory domain
  1835. <6>[19540.114216] cfg80211: Calling CRDA to update world regulatory domain
  1836. <6>[19642.924244] cfg80211: Calling CRDA to update world regulatory domain
  1837. <6>[21977.180033] msm_otg_resume: usb exited from low power mode
  1838. <6>[21977.215362] a6_update_connected_ps: ac=0 usb=0 dock=0
  1839. <6>[21977.215389] max8903b_current_setup: ### CHARGE_DISABLE
  1840. <6>[21977.224994] gadget_event: source=none mA=0
  1841. <6>[21977.237348] a6_update_connected_ps: ac=0 usb=0 dock=0
  1842. <6>[21977.237381] max8903b_current_setup: ### CHARGE_DISABLE
  1843. <6>[21977.453443] msm_otg_suspend: usb in low power mode
  1844. <6>[22924.622370] gpio-keys: volume up button pressed
  1845. <6>[22925.002363] gpio-keys: volume up button released
  1846. <6>[22925.162372] gpio-keys: volume up button pressed
  1847. <6>[22925.392376] gpio-keys: volume up button released
  1848. <6>[22925.512432] gpio-keys: volume up button pressed
  1849. <6>[22925.732361] gpio-keys: volume up button released
  1850. <3>[23415.235121] qtaguid: iface_stat: stat_update() lo not found
  1851. <3>[23415.235172] qtaguid: iface_stat: stat_update() lo not found
  1852. <7>[23419.192384] wlan0: no IPv6 routers present
  1853. <3>[23420.235050] qtaguid: iface_stat: stat_update() lo not found
  1854. <3>[23420.235097] qtaguid: iface_stat: stat_update() lo not found
  1855. <3>[23425.183670] qtaguid: iface_stat: stat_update() lo not found
  1856. <3>[23425.183716] qtaguid: iface_stat: stat_update() lo not found
  1857. <3>[23425.193811] qtaguid: iface_stat: stat_update() lo not found
  1858. <3>[23430.185162] qtaguid: iface_stat: stat_update() lo not found
  1859. <3>[23430.185235] qtaguid: iface_stat: stat_update() lo not found
  1860. <3>[23430.195371] qtaguid: iface_stat: stat_update() lo not found
  1861. <3>[23435.185070] qtaguid: iface_stat: stat_update() lo not found
  1862. <3>[23435.185104] qtaguid: iface_stat: stat_update() lo not found
  1863. <3>[23435.185122] qtaguid: iface_stat: stat_update() lo not found
  1864. <3>[23440.195300] qtaguid: iface_stat: stat_update() lo not found
  1865. <3>[23440.195356] qtaguid: iface_stat: stat_update() lo not found
  1866. <3>[23440.205549] qtaguid: iface_stat: stat_update() lo not found
  1867. <3>[23445.195071] qtaguid: iface_stat: stat_update() lo not found
  1868. <3>[23445.195118] qtaguid: iface_stat: stat_update() lo not found
  1869. <3>[23445.205197] qtaguid: iface_stat: stat_update() lo not found
  1870. <3>[23450.205278] qtaguid: iface_stat: stat_update() lo not found
  1871. <3>[23450.205372] qtaguid: iface_stat: stat_update() lo not found
  1872. <3>[23450.215511] qtaguid: iface_stat: stat_update() lo not found
  1873. <3>[23490.262573] qtaguid: iface_stat: stat_update() lo not found
  1874. <3>[23490.262618] qtaguid: iface_stat: stat_update() lo not found
  1875. <3>[23490.273295] qtaguid: iface_stat: stat_update() lo not found
  1876. <3>[23495.272767] qtaguid: iface_stat: stat_update() lo not found
  1877. <3>[23500.272521] qtaguid: iface_stat: stat_update() lo not found
  1878. <3>[23525.207284] qtaguid: iface_stat: stat_update() lo not found
  1879. <3>[23530.209409] qtaguid: iface_stat: stat_update() lo not found
  1880. <3>[23535.222531] qtaguid: iface_stat: stat_update() lo not found
  1881. <3>[23540.222523] qtaguid: iface_stat: stat_update() lo not found
  1882. <3>[23545.232568] qtaguid: iface_stat: stat_update() lo not found
  1883. <3>[23550.232519] qtaguid: iface_stat: stat_update() lo not found
  1884. <3>[23555.242805] qtaguid: iface_stat: stat_update() lo not found
  1885. <3>[23555.242874] qtaguid: iface_stat: stat_update() lo not found
  1886. <3>[23555.253054] qtaguid: iface_stat: stat_update() lo not found
  1887. <3>[23559.535038] qtaguid: iface_stat: stat_update() lo not found
  1888. <3>[23559.535087] qtaguid: iface_stat: stat_update() lo not found
  1889. <3>[23559.545269] qtaguid: iface_stat: stat_update() lo not found
  1890. <3>[23566.478732] qtaguid: iface_stat: stat_update() lo not found
  1891. <3>[23571.492473] qtaguid: iface_stat: stat_update() lo not found
  1892. <6>[23636.923369] cfg80211: Calling CRDA to update world regulatory domain
  1893. <6>[24215.585261] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
  1894. <6>[24221.963148] msm_device_put:device speaker_stereo_rx set 0
  1895. <6>[24222.282521] cfg80211: Calling CRDA to update world regulatory domain
  1896. <6>[24226.671354] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
  1897. <6>[24228.067205] msm_device_put:device speaker_stereo_rx set 0
  1898. <6>[24228.067260] msm_device_put:device speaker_stereo_rx set 1
  1899. <3>[24228.076822] msm_device_put:device freq =48000
  1900. <6>[24228.089533] aif1 codec rates are already configured, just return
  1901. <6>[24231.343098] msm_device_put:device speaker_stereo_rx set 0
  1902. <7>[24238.362369] wlan0: no IPv6 routers present
  1903. <6>[24242.786987] msm_device_put:device speaker_stereo_rx set 0
  1904. <6>[24242.787041] msm_device_put:device speaker_stereo_rx set 1
  1905. <3>[24242.796454] msm_device_put:device freq =48000
  1906. <6>[24242.809501] aif1 codec rates are already configured, just return
  1907. <6>[24248.893096] msm_device_put:device speaker_stereo_rx set 0
  1908. <6>[24250.326687] msm_device_put:device speaker_stereo_rx set 0
  1909. <6>[24250.326724] msm_device_put:device speaker_stereo_rx set 1
  1910. <3>[24250.326734] msm_device_put:device freq =48000
  1911. <6>[24250.361511] aif1 codec rates are already configured, just return
  1912. <6>[24255.233105] msm_device_put:device speaker_stereo_rx set 0
  1913. <6>[24261.725850] msm_device_put:device speaker_stereo_rx set 0
  1914. <6>[24261.725886] msm_device_put:device speaker_stereo_rx set 1
  1915. <3>[24261.725895] msm_device_put:device freq =48000
  1916. <6>[24261.746236] aif1 codec rates are already configured, just return
  1917. <6>[24265.013438] msm_device_put:device speaker_stereo_rx set 0
  1918. <6>[24268.619680] msm_device_put:device speaker_stereo_rx set 0
  1919. <6>[24268.619731] msm_device_put:device speaker_stereo_rx set 1
  1920. <3>[24268.629138] msm_device_put:device freq =48000
  1921. <6>[24268.642001] aif1 codec rates are already configured, just return
  1922. <6>[24271.903089] msm_device_put:device speaker_stereo_rx set 0
  1923. <6>[24272.255342] msm_device_put:device speaker_stereo_rx set 0
  1924. <6>[24272.255392] msm_device_put:device speaker_stereo_rx set 1
  1925. <3>[24272.264844] msm_device_put:device freq =48000
  1926. <6>[24272.277874] aif1 codec rates are already configured, just return
  1927. <6>[24277.993386] msm_device_put:device speaker_stereo_rx set 0
  1928. <6>[24293.097544] msm_device_put:device speaker_stereo_rx set 0
  1929. <6>[24293.097596] msm_device_put:device speaker_stereo_rx set 1
  1930. <3>[24293.107094] msm_device_put:device freq =48000
  1931. <6>[24293.119863] aif1 codec rates are already configured, just return
  1932. <6>[24296.373309] msm_device_put:device speaker_stereo_rx set 0
  1933. <6>[24300.082582] msm_device_put:device speaker_stereo_rx set 0
  1934. <6>[24300.082633] msm_device_put:device speaker_stereo_rx set 1
  1935. <3>[24300.091976] msm_device_put:device freq =48000
  1936. <6>[24300.105194] aif1 codec rates are already configured, just return
  1937. <6>[24303.363075] msm_device_put:device speaker_stereo_rx set 0
  1938. <6>[24306.700008] msm_device_put:device speaker_stereo_rx set 0
  1939. <6>[24306.700045] msm_device_put:device speaker_stereo_rx set 1
  1940. <3>[24306.700053] msm_device_put:device freq =48000
  1941. <6>[24306.725749] aif1 codec rates are already configured, just return
  1942. <6>[24309.983074] msm_device_put:device speaker_stereo_rx set 0
  1943. <6>[24314.252076] msm_device_put:device speaker_stereo_rx set 0
  1944. <6>[24314.252127] msm_device_put:device speaker_stereo_rx set 1
  1945. <3>[24314.261555] msm_device_put:device freq =48000
  1946. <6>[24314.275958] aif1 codec rates are already configured, just return
  1947. <6>[24317.533094] msm_device_put:device speaker_stereo_rx set 0
  1948. <6>[24318.570527] msm_device_put:device speaker_stereo_rx set 0
  1949. <6>[24318.570582] msm_device_put:device speaker_stereo_rx set 1
  1950. <3>[24318.580156] msm_device_put:device freq =48000
  1951. <6>[24318.592895] aif1 codec rates are already configured, just return
  1952. <6>[24321.853077] msm_device_put:device speaker_stereo_rx set 0
  1953. <6>[24328.232872] msm_device_put:device speaker_stereo_rx set 0
  1954. <6>[24328.232923] msm_device_put:device speaker_stereo_rx set 1
  1955. <3>[24328.242286] msm_device_put:device freq =48000
  1956. <6>[24328.255242] aif1 codec rates are already configured, just return
  1957. <6>[24331.513087] msm_device_put:device speaker_stereo_rx set 0
  1958. <3>[24349.791642] init: untracked pid 32272 exited
  1959. <6>[24354.210314] msm_device_put:device speaker_stereo_rx set 0
  1960. <6>[24354.210364] msm_device_put:device speaker_stereo_rx set 1
  1961. <3>[24354.219876] msm_device_put:device freq =48000
  1962. <6>[24354.232599] aif1 codec rates are already configured, just return
  1963. <6>[24357.503499] msm_device_put:device speaker_stereo_rx set 0
  1964. <6>[24362.166882] msm_device_put:device speaker_stereo_rx set 0
  1965. <6>[24362.166946] msm_device_put:device speaker_stereo_rx set 1
  1966. <3>[24362.176338] msm_device_put:device freq =48000
  1967. <6>[24362.189464] aif1 codec rates are already configured, just return
  1968. <6>[24365.453086] msm_device_put:device speaker_stereo_rx set 0
  1969. <6>[24367.550251] msm_device_put:device speaker_stereo_rx set 0
  1970. <6>[24367.550288] msm_device_put:device speaker_stereo_rx set 1
  1971. <3>[24367.550297] msm_device_put:device freq =48000
  1972. <6>[24367.577048] aif1 codec rates are already configured, just return
  1973. <6>[24375.033673] msm_device_put:device speaker_stereo_rx set 0
  1974. <6>[24675.144497] msm_device_put:device speaker_stereo_rx set 0
  1975. <6>[24675.144548] msm_device_put:device speaker_stereo_rx set 1
  1976. <3>[24675.153963] msm_device_put:device freq =48000
  1977. <6>[24675.166794] aif1 codec rates are already configured, just return
  1978. <6>[24682.013119] msm_device_put:device speaker_stereo_rx set 0
  1979. <6>[24703.405362] msm_device_put:device speaker_stereo_rx set 0
  1980. <6>[24703.405415] msm_device_put:device speaker_stereo_rx set 1
  1981. <3>[24703.414844] msm_device_put:device freq =48000
  1982. <6>[24703.427676] aif1 codec rates are already configured, just return
  1983. <6>[24708.313113] msm_device_put:device speaker_stereo_rx set 0
  1984. <6>[24718.315634] msm_device_put:device speaker_stereo_rx set 0
  1985. <6>[24718.315683] msm_device_put:device speaker_stereo_rx set 1
  1986. <3>[24718.325141] msm_device_put:device freq =48000
  1987. <6>[24718.337983] aif1 codec rates are already configured, just return
  1988. <6>[24721.593090] msm_device_put:device speaker_stereo_rx set 0
  1989. <6>[24724.975116] msm_device_put:device speaker_stereo_rx set 0
  1990. <6>[24724.975168] msm_device_put:device speaker_stereo_rx set 1
  1991. <3>[24724.984617] msm_device_put:device freq =48000
  1992. <6>[24724.997456] aif1 codec rates are already configured, just return
  1993. <6>[24728.253084] msm_device_put:device speaker_stereo_rx set 0
  1994. <6>[24729.376415] msm_device_put:device speaker_stereo_rx set 0
  1995. <6>[24729.376467] msm_device_put:device speaker_stereo_rx set 1
  1996. <3>[24729.385881] msm_device_put:device freq =48000
  1997. <6>[24729.398813] aif1 codec rates are already configured, just return
  1998. <6>[24732.653415] msm_device_put:device speaker_stereo_rx set 0
  1999. <6>[24734.306030] msm_device_put:device speaker_stereo_rx set 0
  2000. <6>[24734.306080] msm_device_put:device speaker_stereo_rx set 1
  2001. <3>[24734.315522] msm_device_put:device freq =48000
  2002. <6>[24734.328387] aif1 codec rates are already configured, just return
  2003. <6>[24738.723067] msm_device_put:device speaker_stereo_rx set 0
  2004. <6>[24789.138715] msm_device_put:device speaker_stereo_rx set 0
  2005. <6>[24789.138766] msm_device_put:device speaker_stereo_rx set 1
  2006. <3>[24789.148171] msm_device_put:device freq =48000
  2007. <6>[24789.161059] aif1 codec rates are already configured, just return
  2008. <6>[24795.383118] msm_device_put:device speaker_stereo_rx set 0
  2009. <6>[24797.735646] msm_device_put:device speaker_stereo_rx set 0
  2010. <6>[24797.735697] msm_device_put:device speaker_stereo_rx set 1
  2011. <3>[24797.745284] msm_device_put:device freq =48000
  2012. <6>[24797.757956] aif1 codec rates are already configured, just return
  2013. <6>[24801.013120] msm_device_put:device speaker_stereo_rx set 0
  2014. <6>[24804.275242] msm_device_put:device speaker_stereo_rx set 0
  2015. <6>[24804.275281] msm_device_put:device speaker_stereo_rx set 1
  2016. <3>[24804.275289] msm_device_put:device freq =48000
  2017. <6>[24804.292433] aif1 codec rates are already configured, just return
  2018. <6>[24807.563129] msm_device_put:device speaker_stereo_rx set 0
  2019. <6>[24822.126821] msm_device_put:device speaker_stereo_rx set 0
  2020. <6>[24822.126860] msm_device_put:device speaker_stereo_rx set 1
  2021. <3>[24822.126870] msm_device_put:device freq =48000
  2022. <6>[24822.149121] aif1 codec rates are already configured, just return
  2023.  
  2024.  
  2025. Broadcasting: Intent { act=com.evervolv.toolbox.action.DUMPLOGCAT_FINISHED (has extras) }
  2026. Broadcast completed: result=0
  2027.  

Reply to "Logcat: ev_tenderloin-testing-2014.01.29"

Here you can reply to the paste above

Powered by Stikked